Pedal Pull Rules & Entry Form

BELMONT CO. FAIR BELMONT CO. FAIR Truck & Tractor Pull Truck & Tractor Pull

SATURDAY, SEPTEMBER 11, 2021 Weigh-in begins at 5 p.m. • Pull begins at 7 p.m. Driver only admitted free at the gate. Driver and truck/tractor admitted through Gate #2 “EACH DRIVER & ALL MECHANICS HAVE AN OBLIGATION TO READ THE RULES FOR THEIR BEST INTEREST”

2021 * EVENT RULES & REGULATIONS * 2021 Entry Fee – $25

OPEN STREET DIESEL 2019 RULES

1. This is an open street legal 4 x 4 truck class available to owners of trucks that are legal for highway use. If your truck is street legal and is built to the rules set forth herein, you can enter this class. Your registration papers are required to prove that the truck is licensed for street use in the state where licensed. A license plate with current sticker tag is required to be affi xed to the truck. Registration paper, license plate and sticker tag must match. Trucks may be hauled to the pull. 8000lbs Chass. 2. Motor changes that increase horsepower over and above the factory rated horsepower or that increase RPMs over and above factory rated range will be limited to changing of chips, air intake system (K & N and other) and exhaust systems. Only O.E.M. injection pumps allowed. T3T4T6 foot allowed stock intake shelf no pipe intakes. 3. All tires must carry a D.O.T. number on the sidewall. No cut, altered or sharpened tires. Trucks with dual rear wheels (2wd or 4wd) may enter and run in this class. Maximum 102 inch width. 4. Front bumpers must be UNALTERED if factory stock. No hanging weighted front devices are permitted but homemade bumpers, brush guards and winch brackets and brackets for snow plow frames are permitted. A truck is permitted to compete without any front bumper. 5. The hitch point will be from the rear bumper only or from a “REESE TYPE” Hitch on a level plane with the point of attachment to the truck’s frame behind the pumpkin of the rear end. No other types of hitches are permitted. No angled, lever, pivot, axis other types of “TRICK” hitches are allowed and the hitch must be stationary in all directions. The hook point must be the furthest point to the back of the truck. Hook point must be past the bed of the truck if there is no bumper, or past the end of the bumper. Each truck must supply a twisted clevis that will accommodate a minimum of 3.75 inches across the opening to accept sled hook. Hitch height will be 24”. **2 x 8 turbo trucks must have all safety equipment** 6. No aluminum engine blocks are permitted unless O.E.M. No open headers will be allowed. Pump diesel is the only fuel permitted. Absolutely no alcohol, nitrous oxide propane or other oxygen extenders. Headers are approved. No superchargers are allowed. Engine swaps between manufacturers are not permitted. Duallies using gasoline as fuel may enter this class. Street legal gasoline trucks (unable to make weight for the 6200 lbs class) may enter with permission of offi cials. 7. No solid suspensions are permitted. Suspension must have a minimum of one inch of movement at all times. No blocks are allowed between axles housing and truck frame THAT WOULD RESTRICT the necessary one inch of movement. Lift kits are acceptable. 8. Trucks must be stock in appearance. Floor in bed must be solid. The wheelbase must not be changed from original manufacturer. Wooden fl atbeds are permitted. Weight in bed permitted. Full interior in cab. 9. The transmission and transfer case must be O.E.M. and available in one ton (or smaller) pickup trucks.

2.5 DIESEL TRUCK 6500 RUN WHAT YOU BRUNG TRUCK 6500 STOCK MC RULES

1.6500 Pounds. Any added weight is to be in bed only. 2. Factory only intake and exhaust manifolds. 3. Reese style hitch 24” high maximum, furthest point on truck with easy access. 4. Any dot approved tire. 5. Gas engines only with OEM HEADS. 6. No ladder bars or traction bars. 7. Spring stops allowed l” clearance minimum. 8. Engine same make as truck. 9. Registration to be presented at sign-up with matching license plates displayed. 10. Vacuum secondary caruretors only. Fuel injection allowed if factory equipped for make and model of truck. 11. Factory style fuel pumps only. 12. Exhaust must be street legal. 13. All water pumps, alternators and power steering pump. Must be belt driven by crankshaft unless otherwise OEM equipped for make and model.

14. ALL JUDGES DECISIONS FINAL - NO ARGUMENTS WILL BE TOLERATED.

CHEATER STOCK TRUCK

CHEATER STOCK 4X4 TRUCK RULES

1. Weight class is 6200lb. No weight brackets 01· hanging weights allowed on front. Weights must be in cab or bed only & securely fastened or contained safely therein. No weights allowed under hood or in the wheel wells. No weights may be suspended under the body/chassis or behind panels/parts. 2. No dual wheels, studded tires, tire chains, or any tire not specifi cally intended for street use are permitted. All tires must carry a D.O.T. # on the side wall. 0.0.T. # must be easily read from the outside of the tire. No cut, altered, or sharpened tires. 3. Front bumpers must be unaltered factory stock. No weighted front devices are permitted - this includes but is not limited to: homemade bumpers, brush guards, & winches. Lower brackets (only) for snow plow frames are permitted so long as no modifi cations that would add weight are determined. An unaltered decorative brush guard may be permitted at the option of the head offi cial. A truck is permitted to compete without a front bumper. 4. The hitch point will be from a “Reese type hitch or drawbar w/ the point of

attachment to the truck’s frame behind the pumpkin of the rear end. Hitch point may not be more than 24” from ground. No angled. lever, pivot, axis or , other types of ‘trick’ hitches are allowed & the hitch must be stationary in all directions. The hitch point from center of axle must be no shorter than 36’’ on regular cab trucks & 48” on extended and 4-door cab trucks. Shortening of the bed in order to shorten the hook point is not permitted. Traction bars are allowed. 5. Gasoline is the only fuel permitted. No aluminum engine blocks are permitted unless O.E.M. Absolutely no alcohol, nitrous oxide or other oxygen extenders. Turbo-Blue and CAM-2 are permitted. Headers are approved but all exhaust must run through a muffl er system. No superchargers or turbochargers permitted. Swaps between manufacturers are not permitted. 6. No solid suspensions are permitted. Must have stock suspension one ton or below. Blocks are allowed between axle housing & truck frame. Lift kits are acceptable. 7. Truck must be stock in appearance. Floor in bed must be solid. The wheelbase may r.iot be changed. Wooden fl atbeds are permitted. 8. Transmission & transfer case must be O.E.M. and available in one ton (or smaller) pick up trucks. U-joint shields, driveshaft loops, and kill switch required. 9. Drivers are urged to wear a seatbelt or shoulder harness and a motor sport type helmet when hooked to the sled. Race seats with 5-point harness allowed. Passengers are not permitted in the truck unless fi rst-time puller -limit 3 times. 10. A maximum of 3 working automotive batteries allowed. 11. Protest rule: $500 for hidden weights. This must be done in one hour time limit. 12. Tractor & Truck pullers hitch opening size requirements: 3 ¾ inch front to back and 3 inch side to side. Note: No loose clevis are to be used. (Revised -Dec. 2017) 13. Helmet/seat belt is required.

CHEATER STOCK TRUCK SAFETY RULES

1. Must have loops on all drive shafts and U-joint shields. 3 on rear and 2 on front 2. A working kill switch. Kill switch must be accessible to sled in plain view of sight. Kill switch must shut off fuel pump. 3. Must have Neutral safety “white” light visible by sled operator. 4. Must have fi re extinguisher within hand reach. 5. Blow proof bell housing or blanket and fl ywheel shields are insurance required. 6. Must wear a helmet.

7. NO HOT RODDING IN PIT AREAS.

8. Driver use of a race seat with fi ve point harness recommended

8500 LIMITED PRO TRACTORS 7700 RUN WHAT YOU BRUNG TRUCK 7700 CLASSIC SUPER STOCK TRACTOR