Page 1

Europe’s #1 for fingerprint access solutions

Finger Scanner Portfolio 2012 ekey home | ekey multi

Your finger is the key


Portfolio FINGER SCANNER DESIGNS

Product Overview finger scanner

wall-mounted

finger scanner

outlet-mounted

finger scanner

intercommunication

integra

system

SYSTEMS

Systems ekey home/ekey multi/ekey net support all ekey finger scanners in any design and all electromechanical locking systems!

ekey home

ekey net

ekey multi GARAGE DOOR

GARAGE DOOR

FRONT DOOR

GARAGE DOOR

FRONT DOOR

FRONT DOOR

INTERNAL DOORS

DOOR

INTERNAL DOORS

Stand-alone solution

Extended stand-alone solution

Networkable solution

1 finger scanner connected to 1 control panel

1 to 4 finger scanners connected to 1 control panel

• 99 fingers can be stored • 1, 2 or 3 relay outputs • Simple installation and operation via the control panel

• 99 fingers can be stored • 4 relay outputs • Simple installation and operation via the control panel • 3 time zones (always, time zone A and time zone B) • Access log

The IP-based biometric access control system for facilities of any size.

• Holiday program automatically blocks users assigned to time zone A or B for a defined time period. • Full access program overrides any time restriction (every user is granted 24/7 access) for a defined time period. • Entering user names • Deactivate or delete users one by one • Fingerprints are assigned to relay outputs via virtual „keys“ defined in the master key plan • Automatic distribution of finger templates to all finger scanners

2

GATE

• Up to 2.000 fingers per scanner • 1 to 4 relay outputs, extendable • Unlimited amount of scanners • Unlimited amount of users • Configurable time zones • Access log

and much more t to u wan bout o y o D ea t mor ss u o d fin untle the co ties of ili possib net? ekey tact us con Please urther for f s! detail


ekey home

ekey multi

Planning Steps for competent advice

1 2 3

Select a suitable system according to project size and customer´s needs: a) ekey home b) ekey multi c) ekey net

Select the most suitable finger scanner based on its design and its mounting method: a) wall-mounted (with or without accessories) b) integra including wall-mounting kit for installation into a wall, or without such a kit for integration into door leafs or door frames c) outlet-mounted for integration into gang boxes or entrance panels

TABLE OF CONTENTS Page

Select a suitable control panel on the basis of certain criteria (only applicable for ekey home): a) wall-mounted, or DIN-rail mounted for installation in the electrical cabinet (distribution board) b) desired amount of relay outputs, e.g. to open the front door (relay 1), arm/disarm the intrusion alarm system (relay 2), etc. ATTENTION: Each fingerprint is assigned to a specific relay output (refer to the „Single family home“ sample project on page 4).

4 5

Select a power supply. Please pay attention to the following: a) standard power supply b) convenient DIN-rail mounted power supply for electrical cabinet ATTENTION: When integrating into entrance panels, a suitable power supply is often already available. ATTENTION: Check required voltage and amperage of door strike, motor lock, etc. A suitable power supply is also often supplied along with motor locks.

Regarding door strikes and motor locks, please pay attention to the following: a) A door strike is low cost, but the door is not deadlocked. b) A motor lock deadlocks the door automatically (via spring clips or a motor) and unlocks the door electrically (motorized). Advise your customer to purchase a motor lock along with the new door!

ekey product overview

2

Planning steps

3

ekey home sample project

4

ekey home wiring diagram

5

ekey multi sample project

6

ekey multi wiring diagram

7

Order info

8

Finger scanner wall-mounted

9

Finger scanner integra 2.0 + outlet-mounted

10

Control panels + power supplies

11

Finger scanner complete product sets 12 3


FRONT DOOR

GARAGE DOOR

ekey home

Stand-alone solution Simple, convenient, secure!

• • • •

Up to 99 different fingerprints can be stored User administration carried out directly on the control panel ekey home 1: finger scanner and control panel with 1 relay output ekey home 2/3: finger scanner and control panel with 2 or 3 relay outputs (different fingers control different relay outputs)

GARAGE DOOR

FRONT DOOR

Example: „Single family home“ project The front door and the garage door are to be controlled via finger scanner. The customer´s requirements: • Keyless access for all family members. • Front door and garage door are to be controlled via the finger scanner mounted at the front door. Two different fingers are to be used. The index finger unlocks the front door via relay output 1. The middle finger opens the garage door via relay output 2. • Simple programming via the control panel.

4

The solution from the installer: • Simple installation of the new ekey home FS OM finger scanner and the convenient ekey home CP DRM 2 control panel. • A future system expansion (e.g. need for an intrusion alarm system, opening the garage door, etc.) would be even easier if the larger control panel with two or three relay outputs is installed right from the beginning.


ekey home wiring

Power supplies

Safety isolating transformer, protection class II (SELV)

Termination Switch position BOTTOM = ON

ekey home control panels

Inputs for exit buttons

Cable recommendation J-Y(ST)Y 4 x 2 x 0.8 Wire assignment: 2x RS485 bus; 2x RS485 back-up wires 2x power supply; 2x back-up wires for increased cross section when cable length is above 50m

RS485: serial wiring (in a line) max. 500m

luster terminal ekey cable type A

ekey home finger scanners Termination Switch Position Right = ON

Termination Switch Position TOP = ON

Termination Switch Position Right = ON

5


GARAGE DOOR

FRONT DOOR

INTERNAL DOORS

DOOR

ekey multi

Extended stand-alone solution: up to 4 finger scanners using only 1 control panel Example: „Villa with domestic staff“ project S1

The front door, the garage door and the gate are to be controlled via finger scanner. GATE

The customer´s requirements: • Time restricted access for domestic staff (time zone A) • No site restriction (all users have access everywhere) • Several functions on each finger scanner (individual fingers = different functions)

S1

S2

S3

ALARM

FRONT DOOR

S2 S1

S1

GARAGE DOOR

The solution from the installer: • The family has unrestricted access (time zone „always“) everywhere • Domestic staff is allowed to enter the house Master Key Plan configuration acc. to example: on 2 selecte­d days in the morning (time zone A) Relay 1 Relay 2 Relay 3 Relay 4 • Intrusion alarm is deactivated when Master Key Plan Front Door Gate Garage Door Alarm opening the front door S1 S2 S3 S1 • From the scanner at the front door, both Scanner front door the gate and the garage door can be opened Scanner gate S1 • From the scanner at the garage door, the Scanner garage door S2 S1 gate can be opened as well

6


ekey multi wiring

On the first and the last device in the RS485 bus, the termination switch has to be set to “ON�.

First device in the bus (chain)

Inputs for exit buttons 3,4

Safety isolating transformer, protection class II (SELV)

Termination Switch position BOTTOM = ON

Inputs for exit buttons 1,2

Devices in the middle of the bus.

Termination Switch position LEFT = OFF

Termination Switch position BOTTOM = OFF

Depending on the configuration, 0 to 3 units can be placed here

ekey cable type A

luster terminal

RS485: serial wiring (in a line) max. 500m No star-shaped wiring!

Termination Switch position Termination Switch Position RIGHT = Right ON = ON

Last device in the bus (chain).

Cable recommendation: J-Y(ST)Y 4 x 2 x 0,8 Wire assignment : 2 x RS485 bus; 2 x RS485 back-up for star-shaped wiring (back and forth!) 2 x power supply; 2 x back-up to increase cross-section for cable lengths above 50 m

7


ekey home

ekey multi

Order info

not to forget about anything ekey home Possibility 1: Complete ekey home product sets All components bundled into a package (refer to page 12) possibility 2: ekey home in 4 steps Step 1: Select a finger scanner Step 2: Select accessories for the finger scanner (only if desired) Step 3: Select a control panel Step 4: Select a power supply (might come along with the entrance panel)

ekey multi ekey multi in 4 steps: Step 1: Select a finger scanner (1-4 units) Step 2: Select accessories for the finger scanner(s) (only if desired) Step 3: ekey multi control panel with 4 relay outputs Step 4: DIN-rail mounted power supply (might come along with the entrance panel)

8

101 287 ekey home 1 IN 2.0 E WM set


1

2

Ordering in 4 steps: 1 Finger scanner

3

2 Accessories (optionally)

4

3 Control panel

4 Power supply

... and now it’s time to order!

Compatible with system >

ekey home

1 Finger scanner wall-mounted Part No.

Description

Model

101 405

ekey home FS WM 2.0

silver-metallic

NEW

FAR: 1.0 x 10 -6 FRR: 1.4 x 10 -2

Temperature range: -25° C up to 70° C IP rating: IP44 Recommended installation height: 135 cm! Display: 3 multi-colour LEDs Functions: 99 fingers storable, tamper-proof, data not lost in case of power failure, bus termination configurable on the device

Dimensions (W/H/D): 45 x 81.55 x 60.2 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC, 8-24 VDC

Compatible with system >

2 Accessories

ekey home

optionally

Weather shield wall-mounted 101 406

NEW

ekey weather shield WM 2.0 ST

Brushed stainless steel

Dimensions W/H/D: 110 x 170 x 95 mm Recommended installation height: 140 cm (upper edge)

Scope of delivery: Weather shield ST, 2 M3x6 mm countersunk screws, 4 3x35 mm countersunk head screws and dowels

Compatible with system >

ekey home

ekey multi

1 Finger scanner outlet-mounted Conceived specifically to be mounted in standardized wall outlets (50 x 50 mm, gang box according to DIN 49073) of the biggest European electrical switch manufacturers.

I = INTEGRATION

OM I

Conceived specifically to be mounted in intercoms, mailboxes, etc.

Part No.

Description

Model

101 148

ekey home FS OM E

for installation into gang boxes, incl. white bezel

101 310

ekey home FS OM I

for installation into entrance panels, etc.

FAR: 1.0 x 10 -6 FRR: 1.4 x 10 -2 Dimensions W/H/D: 50.4 x 50.4 x 30.1 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC, 8-24 VDC Temperature range: -25° C up to 70° C

IP rating: IP31 up to IP43 (depending on switch frame used); IP64 with ekey accessory 101 372 Recommended installation height: 155/110 cm* Display: 3 multi-colour LEDs Functions: 99 fingers storable, tamper-proof, data not lost in case of power failure, bus termination configurable on the device, adjustable to fit the design of different switch manufacturers

*110 cm when installed horizontally (turned 90°)

OM E

E = ELECTRICAL INSTALLERS

For a compilation of switch frames suitable for outdoor operation, refer to: http://downloads.ekey.net/ekey_FS_UP_IP-Schalterprogramme_en.pdf

2 Accessories

Please see next page >>

9


Compatible with system >

2 Accessories

ekey home

ekey multi

optionally

Bezel for outlet-mounted finger scanner 101 167

ekey bezel OM AL 50 x 50

plastic, aluminum

101 168

ekey bezel OM AN 50 x 50

plastic, anthracite

Dimensions W/H/D: 50.4 x 50.4 x 2.5 mm

Colours: anthracite, white-aluminum

Frame for outdoor use (with the OM I finger scanner) 101 372

NEW IP64

ekey frame OM ST IP64

stainless steel

Dimensions W/H/D: 70 x 70 x 6.6 mm

Functions: to be used in combination with FS OM I (101 310). IP64 on exterior plasters with max. 2 mm masonry graining around the electrical outlet.

Stainless steel gang box for outdoor use 100 304

NEW

ekey in-wall mounting kit OM ST

Brushed stainless steel

Dimensions W/H/D: 88 x 88 x 42 mm

Functions: to be used in combination with the FS OM I (101 310). Due to its inclination, the ekey inwall mounting kit OM ST can be used to install the finger scanner at 135 cm lower edge.

Compatible with system >

ekey home

ekey multi

1 Fingerscanner integra Part No.

Description

Model

101 326

ekey home FS IN E

incl. design element and cable

FAR: 1.0 x 10 -6 FRR: 1.4 x 10 -2 Dimensions W/H/D: Housing 43.6 x 89 x 17.3 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC, 8-24 VDC

Temperature range: -25째 C up to 70째 C IP rating: IP54 Recommended installation height: 155 cm! Display: 3 multi-colour LEDs Functions: 99 fingers storable, tamper-proof, data not lost in case of power failure, bus termination configurable on device Compatible with system >

2 Accessories

optionally

In-wall mounting kits for finger scanner 101 302

ekey in-wall mounting kit IN ST

stainless steel

101 301

ekey in-wall mounting kit IN ST LED

stainless steel incl. alarm LED

Flush-mounted box W/H/D: Housing 60 x 122 x 36 mm

Faceplate W/H/D: 96 x 142 x 2 mm

ekey in-wall mounting kit IN ST incl. weather shield

stainless steel

Flush-mounted box W/H/D: Housing 60 x 122 x 36 mm

Faceplate W/H/D: 126 x 142 x 65 mm

ekey mounting set IN compact for flush-mounted installation

0,5 mm metal sheet

101 147

101 300

Flush-mounted housing W/H/D: Housing 42 x 87 x 25 mm 101 383

ekey faceplate IN ST for item 101 300 (optional) Dimensions W/H/D: 96 x 142 x 2 mm

10

stainless steel

ekey home

ekey multi


3 Control panels Part No.

Compatible with system >

ekey home

Description

ekey home

Model

ekey home wall-mounted control panel 100 478 100 479

ekey home CP WM 1

1 relay

ekey home CP WM 3

3 relays

Dimensions W/H/D: 180 x 110 x 39.2 mm Power consumption: approx. 1 W Supply voltage: 9-12 VAC/DC Temperature range: -20° C up to 70° C IP rating: IP20 Relays: CP 1: 1 output, dry contact CP 3: 3 outputs, dry contacts

Max. relay input voltage, input current: 250 VAC/5A; 30 VDC/5A Inputs (exit button): Display: LED 2x7 segments Programming: 4 push buttons RS485 termination: not configurable Functions: Enroll users, delete users, change relay opening times (0-99s), adjustable security code, reset

ekey home DIN-rail mounted control panel 101 162 101 312

3 Control panel

ekey home CP DRM 1

1 relay

ekey home CP DRM 2

2 relays

Dimensions W/H/D: 70 (4HP) x 86 x 54 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC/DC Temperature range: -20° C up to 70° C IP rating: IP20 Relays: CP DRM 1: 1 output, dry contact CP DRM 2: 2 outputs, dry contacts

Max. relay input voltage, input current: 42 VAC/DC; 2A Inputs (exit button): CP DRM 1: 1 contact CP DRM 2: 2 contacts Display: LCD 106 x 56 pixels, 7 lines/21 characters + 2/4 status-LEDs RS485 termination: configurable Functions: Enroll users, delete users, name entries, change relay times (0-99s), adjustable security code, reset, test mode

Compatible with system >

ekey multi

ekey multi

ekey multi control panel DIN-rail mounted 101 163 Available from 09/2011

NEW

ekey multi CP DRM 4

4 relays

Dimensions W/H/D: 70 (4HP) x 86 x 54 mm Power consumption: approx. 1 W Supply voltage: 8-24 VAC/DC Temperature range: -20° C up to 70° C IP rating: IP20 Relays: 4 outputs, dry contacts Max. relay voltage, power input: 42 VAC/DC; 2A

Inputs (exit button): 4 contacts Display: LCD 106 x 56 pixels, 7 lines/ 21 characters + 8 status LEDs RS485 termination: configurable Runtime buffer integrated RTC: 96h Functions: Enroll users, delete users, change relay opening times (0-99s), adjustable security code, reset, test mode, 3 time zones, access log, master key plan, name entries, holiday and full access program

Compatible with system >

ekey home

ekey multi

4 Power supply Power supply 800 060

100 203

100 205

ekey PS ST 230AC/9VAC/0.8A

Power adapter

Dimensions W/H/D: 52 x 64 x 42.5mm Supply voltage: 230 VAC

Output voltage, output current: 9 VAC, 800 mA Cable length: 5 m

ekey PS DRM 230AC/12VAC/1.5A

DIN rail-mounted

Dimensions W/H/D: 3HP, 52.5 x 93 x 68.5 mm Supply voltage: 207-253 VAC

Output voltage, output current: 12 VAC; 1.5 A Temperature range: -20°C up to 50°C IP rating: IP20

ekey PS DRM 230AC/12VDC/2A

DIN rail-mounted

Dimensions W/H/D: 2HP, 35 x 93 x 68.5 mm Supply voltage: 100-240 VAC

Output voltage, output current: 12 VDC; 2 A Temperature range: -10°C up to 50°C IP rating: IP20

11


Europe’s #1 for fingerprint access solutions

Ordering in 1 step:

COMPLETE PRODUCT SETS ekey home complete (WM, IN, OM) Compatible with system >

ekey home

NEU

Part No.

Description

Model

101 407

ekey home set WM 2.0 WM 1

silver-metallic, with WM control panel, 1 relay output

101 408

ekey home set WM 2.0 WM 3

silver-metallic, with WM control panel, 3 relais output

COMPLETE PRODUCT SET consists of: • wall-mounted finger scanner (silver-metallic 101 405)

NEU

101 409

EXPORT/1204

COMPLETE PRODUCT SET Finger scanner wall-mounted

• wall-mounted control panel 1 (100 478), or wall-mounted control panel 3 (100 479)­­­ • power supply ekey PS ST 230 AC/9 VAC/0.8 A (800 060)

ekey home set WM 2.0 DRM 1

with DIN-rail mounted control panel, 1 relay output

COMPLETE PRODUCT SET consists of: • wall-mounted finger scanner (silver-metallic 101 405)

• ekey home CP DRM 1 control panel (101 162) • ekey PS DRM 230 AC/12 VAC/1.5 A DIN-rail mounted power supply (100 203)

Compatible with system >

ekey home

COMPLETE PRODUCT SET Finger scanner outlet-mounted NEW

101 165

ekey home set OM E DRM 1

with DIN-rail mounted control panel, 1 relay output

COMPLETE PRODUCT SET consists of: • ekey home FS OM finger scanner • bezel in white colour • mounting bracket for installation in a gang box (50x50 mm)

• spacers for adjusting the height between bezel and switch frame • ekey home CP DRM 1 control panel (101 162) • ekey PS DRM 230 AC/12 VAC/1.5 A DIN-rail mounted power supply (100 203)

Compatible with system >

ekey home

COMPLETE PRODUCT SET Finger scanner integra 101 313

ekey home set IN E DRM 1

with DIN-rail mounted control panel, 1 relay output

101 287

ekey home set IN E WM 1

with wall-mounted control panel, 1 relay output

ekey home set IN E DRM 1: • ekey home FS IN finger scanner integra • stainless steel design element • cable type A 8m • ekey home CP DRM 1 control panel • ekey PS DRM 230 AC/12 VAC/1.5 A DIN rail-mounted power supply

ekey home set IN E WM 1: • ekey home FS IN finger scanner integra • stainless steel design element • cable type A 8m • ekey home CP WM 1 control panel • ekey PS ST 230 AC/9 VAC/0.8 A power supply

Fig.: Part No. 101 313

Your reseller:

Austria & International ekey biometric systems GmbH Lunzerstraße 89, A-4030 Linz Tel: +43 732 890 500 2000 office@ekey.net

Germany ekey biometric systems Deutschland GmbH Liebigstraße 18, D-61130 Nidderau Tel: +49 6187 90696 0 deutschland@ekey.net

Switzerland & Liechtenstein ekey biometric systems Est. Landstrasse 79, FL-9490 Vaduz Tel.: +41 71 560 54 80 schweiz@ekey.net

Eastern Adriatic Region ekey biometric systems d.o.o. Vodovodna cesta 99, SLO-1000 Ljubljana Tel.: +386 1 530 94 89 info@ekey.si

Further ekey products for access control, time & attendance and IT security are available at www.ekey.net 12

Made in Austria

ekey Finger Scanner Portfolio 2012  

ekey home, ekey multi

Read more
Read more
Similar to
Popular now
Just for you