Get the best solar collector system provide |viessmann

High Efficiency Solar Collector Service Provider-UAE | Viessmann A solar collector is a device used to collect energy from the sun, which absorbs the sun's rays and converts them into heat or electricity. The type of material and cover for the solar collector is used to increase the absorption of solar energy. Solar space heating occurs when the sun shines through the windows of a building and warms the interior. Building designs that improve solar radiation (north of the equator) usually have windows facing south that allow the sun to shine on walls that capture the sun's heat or floor in a building during the winter. Solar energy is absorbed by building materials and heats the interior of buildings with natural radiation and convection. Window holes or shadows prevent the sun from entering the windows during the summer to keep the building cool.

Active solar systems have fluid heating systems (air or liquid) and fans or pumps to transport the fluid to the collections, where it is heated, to the inside of the building or to the storage system, where the heat is released, return to the collector for reheating. Active solar water heating systems usually have a solar storage tank.

Benefit for solar collector:    

Solar water heaters provide hot water all year round.

Reduce utility bills as they can supply one-third of your hot water needs.

Reduce your carbon footprint by saving between 30 kg and 510 kg of carbon dioxide (CO2) annually.

Unlike other renewable energy solutions, solar water heaters have lower maintenance costs and higher durability, as evidenced by their five to ten year warranty.



 

Solar water heating uses solar heat, so once you meet the initial investment costs in installation, there is a very small additional cost, in addition to the amount of electricity needed to run the pump that empowers the system.

It works with your existing heater or hot water boiler, or even heat pumps and biomass.

Solar water heating is worth earning the average Renewable Energy Profit for energy production through renewable resources.

For applications where there may be a decrease in temperature below zero degrees it is necessary to use a closed loop system. The main difference between the open loop systems is that the water is cooled and cooled to a temperature that will not freeze at a temperature below which the solar collector may be below. Cool will usually be refrigerated, oiled or filtered. Closed loops are usually more expensive than their open counters and should be extremely careful to avoid water contamination by refrigeration. The energy absorbed by the cooler is then transferred to hot water via a temperature changer. In a drain back system the cooler may be pure water.

The system operates on the principle that there is only water in the collector when the pump is operating. This has the advantage that the coolant used in the system will not have the opportunity to cool down at night when the temperature may drop to a level which may cause the cooler to rise in congestion and thus possibly cause the fluid to flow as freely as possible.

Should. The only feature required for a drain back system is that the solar collector is lifted from the heater or drainbak tank so that cooling flows out of the collector. This system also applies the principle that water is distributed between the collector and the drain back tank where the set temperature is reached between the solar collector and hot water.