Chargers.............................................................7

These are general maintenance guidelines. Please consult your owner’s manual prior to performing any repairs or maintenance on this machine.

Maintenance Task Daily Weekly Yearly Charge the batteries X Drain/clean tanks and hoses X Clean/clear brushes/pad X Clean/clear squeegee X Clean/clear vacuum shut-off float X Check/replace squeegee blades Check/clean solution filter Check/fill battery water levels (wet batteries only) Check/replace motor carbon brushes X X X

X

Lubrication Tips: Once a month, pump a small amount of grease into each grease fitting on the machine until grease seeps out around the bearings.

Grease fitting locations are: • Rear caster wheel axle and swivel (2) per assembly • If chain drive (2) pillow block bearings

Apply light machine oil to lubricate the: • Drive chain (if no transaxle) • Squeegee tool adjustment knob, wheels, and rollers • Pivot points for the squeegee and scrub brush linkage Serial Number Location