INCREASE YOUR PRODUCTIVITY WITH QUALITY PORTABLE CONVEYORS WORLDWIDE FOR GREENHOUSE, NURSERIES, GARDEN CENTERS & AGRICULTURE
Our Porta-veyor Features
AVAILABLE IN 10”, 12” OR 16” WIDE BELTS
Moving product through turns is no problem with our Porta-Veyor. Up and down angles to match your needs. Can go up/down inclines and declines of 20 degrees.
US GLOBAL RESOURCES
80 YEARS OF SERVICE TO A GROWING WORLD
TOLL: FREE: +1 (888) 334-1440
Ph: 830-755-4768 | Fax: + (830) 755-4753
Email: usgr@usgr.com | www.usgr.com
STACKABLE FOR EASY STORAGE
Easy-join gearing makes it fast and simple to add or remove conveyor sections for your application.
Applications and Industries
Trucking/Shipping
Loading/Unloading applications
Warehousing (wholesale and retail)
Product Handling/Shelf restocking
Catering/Assembly line maintenance
Conveyor Maintenance ♦
♦
♦
GOING FROM POINT “A” TO POINT “B” CAN BE VERY EXPENSIVE TRIP — IF YOU HAVEN’T DISCOVERED
Soaring labor costs have minimized dollar effectiveness. PORTAVEYORS provides the means to utilizing your employees where they are most benefit to you. PORTA-VEYORS can move up to 750 lbs. per 75 ft unit. It’s aluminum construction (each sections weighs only 55 lbs.) makes for easy set-up in any location for any purposes.
Growers need to move their plants to and from the fields. The power-take-off option for the Porta-Veyor is ideal, as the same tractor that hauls the load can also power the conveyor that sets up the load. With up to a 125 ft length, the Porta-Veyor can easily reach into the middle of most fields, and the 20% slope capability lets you easily adapt to the terrain of the field and road.
Our customized portable conveyors on a greenhouse, nurseries or garden centers can be moved on rails to the location needed, where it is used to move flats of plants.
Load and unload your truck, trailers, and containers with a minimum of people and effort. With a maximum length of 125 ft the Porta-Veyor can reach from your loading/ unloading area to the furthest end of the truck, trailer, or container. The Porta-Veyor can handle a 20% up- or down-slope, so it is easy to adjust for the relative heights of both dock and vehicle.
ORIGINAL ADD-A-VEYOR REPLACEMENT PARTS/KITS SUCH AS BELTS AND COMPONENTS
AVAILABLE. UPGRADE YOUR ADD-AVEYOR TO A COMPLETE NEW IMPROVED UNIT OF PORTA-VEYOR
What Can a Porta-Veyor Do For You?
The Porta-Veyor is a portable, labor-saving device, and this translates to cost savings for you: Save money labor and labor-related costs (taxes, insurance, health, etc.).
Use less people to accomplish your task, with fewer health and safety risks.
Achieve higher throughput (product moved per unit time) than with manual labor approaches.
Because it is portable, the Porta-Veyor can be used where you need. Power it from an electric supply, from a portable generator, or use power-take-off from your tractor or other PTO-equipped vehicle.
One portable unit can be shared among multiple job locations.
The up-slope and down-slope capability provides a portable lift capability anywhere, anytime.
Drive Specifications
Single drive motor at one end for up to 100 feet (30.5 m) of conveyor
Power take off drive unit available
100 VAC or 220 VAC motors
Electric power from electric circuit or portable generator
Reversible
Variable speed
Options
Side Rails
Monopods
Storage cart
Leg extensions
Power Take Off (PTO) drive unit
Right angle connections
Flow-stop switch
Counter (electric eye)
Portable generator
Drive section mobility unit
U.H.M.W. wear strip for each conveyor section
EACH SECTION IS 12.6 FT. LONG
10”, 12” OR 16” WIDE BELTS
PORTABLE CONVEYORS
VARIABLE SPEED. FULLY REVERSIBLE
CAN GO UP/DOWN INCLINES AND DECLINES OF 20 DEGREES
USE LOWEST SPEED TO MAKE CONVEYOR AN ASSEMBLY LINE
PLUG IN INTO ANY 110 VOLT OUTLET
STACKABLE FOR EASY STORAGE
CONNECT ONLY AS MANY SECTIONS AS NECESSARY TO DO A SPECIFIC JOB.
ADJUSTABLE LEGS, OPTIONAL
MONOPODS, STORAGE CART OPTIONAL
APPROX. WEIGHT: DRIVER 125 LBS. EACH SECTION 55 LBS.
WITH A PORTABLE GENERATOR, PORTA-VEYOR CAN BE USED ANYWHERE.
