Rotabroach elements

The original name for hole cutting systems

Introducing the new members of the Element family

E50

E75

E100 Rotabroach

ELEMENT 100 Variable speed - secondary motor protection

Cutter capacity 100mm x 100mm

Mounted coolant bottle

Powerful 2000W motor

Twist drill chuck capacity 16mm (supplied with machine) 4 speed high performance gear box

Internal motor cable

Tap capacity up to M3 - M30

Quick release capstan arm

Ergonomic carryy handle

Maximum 40mm (MT3)

Cutsmart - primary motor protection

User friendly controls

Weighing only 24.8kg

3 morse taper arbor

For the best performance and prolonged tool life always use Rotabroach cutting fluid and lubricants.

Optional swivel base

High powered magnet 20,000N

• Rotabroach’s

largest machine with large diameter drilling and cutting depths.

• Suitable for drilling up to 100mm diameter by 100mm depth.

• The Element 100 offers forward and reverse functionality for tapping.

• The Element 100 can be supplied as a swivel or non-swivel base.

• The Element Range uses a unique dual motor protection system prolonging the machines life & preventing unwanted wear.

Element 100 Model Number

Element 100/1 / Element 100/3 110V 2000W / 230V 2000W

No Load RPM

Gear 1: 45-129 RPM / Gear 2 : 70 - 208 RPM/ Gear 3: 150 - 434 RPM/ Gear 4: 240 - 700 RPM

Max Hole Cutting Capacity

ø100 x 100mm Deep - 31.75mm with 3MT drill.

Overall Dimensions Machine Weight Magnetic Adhesion Magnet Size Safety Features

Height 560mm / Width 230mm with Capstan / Length 460mm with Guard 24.8kg 20,000N 228mm x 114mm Cutsmart TM Technology / Fixed Guard / Magnetic Detection / Mechanical Clutch/ Secondary motor protection Rotabroach

Element 100

ELEMENT 75 Variable speed - secondary motor protection

Cutter capacity 75mm x 75mm

Mounted coolant bottle

Powerful 1800W motor

Twist drill chuck capacity 16mm (supplied with machine)

Internal motor cable High performance

2 speed gearbox

Ergonomic carry handle

Quick release capstan arm

Tap capacity up to M3-M24

Cutsmart - primary motor protection

User friendly controls

Weighing only 23.5kg

Maximum 40mm (MT3)

For the best performance and prolonged tool life always use Rotabroach cutting fluid and lubricants.

3 morse taper arbor

Optional swivel base High powered magnet 18,500N

•

For heavy duty operations the ‘Element 75’ is a must for drilling larger holes.

Compact, durable and more portable than other larger machines.

Suitable for drilling up to 75mm diameter by 75mm depth.

• The Element 75 offers forward and reverse functionality.

• The Element 75 can be supplied as a swivel or non-swivel options.

• The Element range uses a unique dual motor protection system prolonging the machines life and preventing unwanted wear.

• •

Element 75 Model Number

Element 75/1 / Element 75/3 110V 1800W / 230V 1800W

No Load RPM

Low Gear: 70 - 80RPM / High Gear: 200 - 500 RPM

Max Hole Cutting Capacity

ø75 x 75mm Deep -

Overall Dimensions Machine Weight Magnetic Adhesion Magnet Size Safety Features

with 3MT drill Height 545mm / Width 230mm with Capstan / Length 460mm with Guard 23.5kg 18,500N 220mm x 114mm Cutsmart TM Technology / Fixed Guard / Magnetic Detection / Mechanical Clutch/ Secondary motor protection Rotabroach

Element 75

ELEMENT 50 Variable speed - secondary motor protection Powerful 1500W motor

Mounted coolant bottle

Cutter capacity 50mm x 50mm

Twist drill chuck capacity 13mm (supplied with machine)

High performance 2 speed gearbox

Internal motor cable Tap capacity up to M3-20 Ergonomic carryy handle Maximum 31mm (MT2)

Cutsmart - primary motor protection

Quick release capstan arm

User friendly controls 2 morse taper arbor

For the best performance and prolonged tool life always use Rotabroach cutting fluid and lubricants.

Lightweight only 15.8 kg

High powered magnet 13,500N

• The ‘Element 50’ is one of Rotabroach’s most versatile machines.

• Small in size, with reversible features to allow tapping.

Suitable for drilling up to 50mm diameter by 50mm depth.

Element 50 can be supplied as a non-tapping machine.

• The Elements use a dual motor protction system prolonging the machines life.

•

• The

Element 50 Model Number Motor specification

Element 50/1 / Element 50/3 110V 1500W / 230V 1500W

No Load RPM

Low Gear: 100 - 265 RPM / High Gear: 200 - 500 RPM

Max Hole Cutting Capacity

ø50 x 50mm Deep - 23mm with 2MT shank drill

Overall Dimensions Machine Weight Magnetic Adhesion Magnet Size Safety Features

Height 460mm / Width 195mm with Capstan / Length 400mm with Guard 15.8kg 13,500N 200mm x 98mm Cutsmart TM Technology / Fixed Guard / Magnetic Detection / Mechanical Clutch/ Secondary motor protection

Rotabroach

Element 50

ELEMENT CUTSMART

TM

Red magnet LED - Indicates optimum adhesion not acheived. Drilling operation is still available but the red magnet LED makes the operator aware of a reduced magnetic strength.

Green Zone Perfect, try to keep in the green zone for the best cut and optimum machine performance.

Yellow Zone A little too much pressure on the drill, ease off to get back to the green zone.

Green magnet LED - Drilling operation is available. This makes the operator aware of the optimum magnetic strength.

The Element range is fitted with Rotabroach’s unique CutSmart™ panels designed to increase your tool life and productivity.

Designed for you to get the most out of your machine and cutter. CutSmart™ has an easy to read panel that indicates when you are applying too much force avoiding inappropriate wear. Cutsmart™ allows the cutter to do the work and you will find that a much smoother hole and faster drilling time is achieved.

Red Zone Overload: Back off immediately as too much force will cause the motor to cut off if you continue.

Rotabroach

TAPPING

MODEL No: ELEMENT NO LOAD SPEED: RPM MACHINE WEIGHT Kgs MAGNET HOLDING FORCE: Kgs CONNECT TO A SUPPLY NO LESS THAN 20A DISCONNECT FROM SUPPLY BEFORE REMOVING COVER THIS IS A MAGNETIC DRILL

MODEL No: ELEMENT NO LOAD SPEED: RPM MACHINE WEIGHT Kgs MAGNET HOLDING FORCE: Kgs CONNECT TO A SUPPLY NO LESS THAN 20A DISCONNECT FROM SUPPLY BEFORE REMOVING COVER THIS IS A MAGNETIC DRILL

MODEL No: ELEMENT NO LOAD SPEED: RPM MACHINE WEIGHT Kgs MAGNET HOLDING FORCE: Kgs CONNECT TO A SUPPLY NO LESS THAN 20A DISCONNECT FROM SUPPLY BEFORE REMOVING COVER THIS IS A MAGNETIC DRILL

2) Magnet ON To turn the magnet on, press the large button on the control panel. The green LED will indicate the magnet is on.

1) Power When the drill is connected to the power supply, the red LED will indicate power to the drill.

MODEL No: ELEMENT NO LOAD SPEED: RPM MACHINE WEIGHT Kgs MAGNET HOLDING FORCE: Kgs CONNECT TO A SUPPLY NO LESS THAN 20A DISCONNECT FROM SUPPLY BEFORE REMOVING COVER THIS IS A MAGNETIC DRILL

4) Motor OFF Press the bottom left button on the control panel again. Once pressed the green illumination will no longer light up, this means the motor has stopped.

Additional notes

3) Motor ON Press the bottom left button on the control panel.

Once pressed the button will illuminate green.

Proceed with cutting- following all safety guidelines.

MODEL No: ELEMENT NO LOAD SPEED: RPM MACHINE WEIGHT Kgs MAGNET HOLDING FORCE: Kgs CONNECT TO A SUPPLY NO LESS THAN 20A DISCONNECT FROM SUPPLY BEFORE REMOVING COVER THIS IS A MAGNETIC DRILL

5) Motor ON reverse Press the bottom right button on the control panel. Once pressed the blue illumination will light up, this means the motor is on in the reverse direction.

Go back to step 3 to start over.

When tapping, always use the lowest gear with the lowest speed. Never tap without applying tapping or cutting compound, ensuring a smooth cut and prolonging tool life.

Drill the hole to the recommended tapping size for the thread to be cut, information can be found on the Rotabroach website (www.rotabroach.co.uk).

Once cutting, the tap will feed itself through. When using the reverse feature only gentle pressure on the feed handles should be necessary.

Rotabroach