fabricator 200

fabricator family brochure.qxp

2/4/08

09:59

Page 1

Fabricator Series

fabricator family brochure.qxp

2/4/08

09:59

Page 2

Fabricator 200 Compact MIG (GMAW) Transformer Rectifier Machine Machine Specifications Input Voltage Input Frequency Output range Rated Output @ Duty Cycle Arc Voltage Range Voltage Settings Dimensions (HxWxD) Weight

1ph. 230v 50/60 Hz 30 – 200 Amps 13% @ 200A 30% @ 145A 15 - 22v 8 770 x 410 x 830 mm 58 kg

The Fabricator 200 is a 230 volt, single phase, MIG machine ideally suited for light fabrication, automotive repairs, light rural and maintenance applications. It comes complete with wheels, cylinder tray, MIG gun, work lead, flow regulator in a ready to weld package. The Fabricator 200 delivers a high maximum output of 200 amps Features: • 8 Fine Welding Voltage Control Settings • 200 amp maximum output • Reverse polarity for gas/gasless operation

Wire Feed System Specifications

• Thermal Overload Protection with Indicator

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

• Optimum arc starting feature

Part No - 707079

1 - 18 m/min 2 Roll Hard Wire Soft Wire Cored Wire

• Spot timer control 0.6-0.8mm 0.8-1.0mm 0.6-1.2mm

Fabricator 200 Machine with Work Lead, Wheeling Kit/Cylinder Tray, gas hose, 0.6/0.8 Feed Roll and operating manual

• 3 Years Warranty

OPTIONS AND ACCESSORIES Part No. 62020 62179 62024 62028 62023

Description 0.6/0.8mm 0.8/1.0mm 0.9/1.2mm 0.8/0.9mm 1.2/1.6mm

TS212X4045EL TS215X4045EL

Hard Wire V groove feed roll Soft Wire U groove feed roll Soft Wire U groove feed roll Cored Wire V knurl feed roll Cored Wire V knurl feed roll

3.6m Spitfire 250A MIG Gun 4.5m Spitfire 250A MIG Gun

fabricator family brochure.qxp

2/4/08

09:59

Page 3

Fabricator 250 Compact MIG (GMAW) Transformer Rectifier Machine Machine Specifications Input Voltage Input Frequency Output range Rated Output @ Duty Cycle Arc Voltage Range Voltage Settings Dimensions (HxWxD) Weight

1ph. 230v 50/60 Hz 30 – 250 Amps 50% @ 250A 15 - 29v 16 800 x 355 x 850 mm 103 kg

1 - 20 m/min 2 Roll Hard Wire Soft Wire Cored Wire

Features: •16 Fine Welding Voltage Control Settings

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

The Fabricator 250 Compact is a multi-voltage, single phase high output and high duty cycle DC power source. This unit is the ideal choice for single phase use for light and medium fabrication and heavier maintenance applications.

The Fabricator 250 Compact provides excellent arc characteristics with Gas Metal Arc Welding (GMAW) and Flux Cored Arc Welding (FCAW) with or without gas.

• Thermal Overload Protection with Indicator • Reverse Polarity Facility 0.6-1.0mm 0.8-1.2mm 0.8-1.2mm

• Spot Timer Control • Adjustable Burnback Control • Trigger Latching Facility • 2 Years Warranty

Part No - 706114

Fabricator 250 Compact Machine complete with feed rolls for 0.6/1.0mm wire, gas hose, earth cable and clamp, mains cable and operating manual

OPTIONS AND ACCESSORIES Part No. 62020 62022 62179 62024 7977728 62028 62023

Description 0.6/0.8mm 0.9/1.2mm 0.8/1.0mm 0.9/1.2mm 1.2/1.6mm 0.8/0.9mm 1.2/1.6mm

TS212X4045EL TS215X4045EL

Hard Wire V groove feed roll Hard Wire V groove feed roll Soft Wire U groove feed roll Soft Wire U groove feed roll Soft Wire U groove feed roll Cored Wire V knurl feed roll Cored Wire V knurl feed roll

3.6m Spitfire 250A MIG Gun 4.5m Spitfire 250A MIG Gun

fabricator family brochure.qxp

2/4/08

09:59

Page 4

Fabricator 330 Compact and Separate with VF2c Wire Feed Unit MIG (GMAW) Transformer Rectifier Machine Machine Specifications Input Voltage Input Frequency Output range Rated Output @ Duty Cycle Arc Voltage Range Voltage Settings Dimensions (HxWxD) Weight

3ph. 220/380/400v 50/60 Hz 25 – 330 Amps 30% @ 330A 16 - 29v 24 800 x 355 x 850 mm (Compact + Separate) 85 kg Compact 102 kg Separate

The Fabricator 330 Compact and VF2c Separate Wirefeeder models are multi-voltage, three phase, constant voltage DC power sources targeted at medium fabrication and heavier maintenance applications.

The Fabricator 330 provides excellent arc characteristics with Gas Metal Arc Welding (GMAW) and Flux Cored Arc Welding (FCAW) with or without gas.

Features: • 24 Fine Welding Voltage Control Settings

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

1 - 20 m/min 2 Roll Hard Wire Soft Wire Cored Wire

• Trigger Latching Facility • Adjustable BurnBack Control • Spot Timer Control (Compact model only) 0.6-1.2mm 0.9-1.6mm 0.8-1.6mm

• Stitch Timer Control (Compact model only) • Reverse Polarity Facility • Thermal Overload Protection with Indicator • 2 Years Warranty

Part No - 706124 Fabricator 330 Compact Machine complete with feed rolls for 0.6/1.2mm wire, gas hose, earth cable and clamp, mains cable and operating manual

OPTIONS AND ACCESSORIES

Part No - 706125 Fabricator 330 Separate complete with VF2c roll feeder, 8m connecting cable, Part No. 62020 feed rolls for 0.6/1.2mm wire, gas hose, earth cable and clamp, mains cable 62022 and operating manual 62179 62024 7977728 62028 62023 705975 704913 705900 705948

Description 0.6/0.8mm 0.9/1.2mm 0.8/1.0mm 0.9/1.2mm 1.2/1.6mm 0.8/0.9mm 1.2/1.6mm

TS412X3545EL TS415X3545EL

Hard Wire V groove feed roll Hard Wire V groove feed roll Soft Wire U groove feed roll Soft Wire U groove feed roll Soft Wire U groove feed roll Cored Wire V knurl feed roll Cored Wire V knurl feed roll Wire feeder swivel base Wire feeder trolley 8m interconnecting ext. cable Spool Cover

4m Spitfire 450A MIG Gun 5m Spitfire 450A MIG Gun

fabricator family brochure.qxp

2/4/08

09:59

Page 5

Fabricator 400II Separate with VF4ECII Wire Feed Unit MIG (GMAW) Transformer Rectifier Machine Machine Specifications Input Voltage Input Frequency Output range Rated Output @ Duty Cycle Arc Voltage Range Voltage Settings Dimensions (HxWxD) Weight

3ph. 400v 50/60 Hz 40 – 400 Amps 30% @ 400A 19.9 - 46.6v 20 1360 x 370 x 760 mm 110 kg

The Fabricator 400II Separate with VF4ECII Wire Feed Unit is a three phase, 400A MIG machine with 20 Voltage settings, digital meters and micro processor control.

Easy to use with medium to heavy applications in mind, the Fabricator 400II has been designed with robustness and reliability as its priorities to cope with a wide range of material requirements in the harshest of environments. Copper wound transformers are standard to give outstanding welding characteristics.

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

1 - 19 m/min 4 Roll Geared Hard Wire Soft Wire Cored Wire

Features: • Thermal Overload Protection with Indicator 0.6-1.2mm 0.8-1.2mm 0.8-1.6mm

• Spot Timer Control • Stitch Timer Control • Adjustable Burnback Control • Trigger Latching Facility

Part No - 10-9405

Fabricator 400A Remote system with 1m interconnection, 1.0/1.2 mm drive rolls, earth cable & clamp, feeder wheel kit, mains cable and operating manual

• Electronic Feedback of Wire Speed • Voltage and Amp Meters at WFU • Pre and Post Gas Control • Initial Speed Control • 2 Years Warranty OPTIONS AND ACCESSORIES Part No. VM0263 VM0266 VM0267 U45806 U45810 U45812 U45820 U45822 U45826 U45830 U45832

Description 1m Interconnecting cable assy a/c 5m Interconnecting cable assy a/c 10m Interconnecting cable assy a/c 0.6/0.8mm Hard Wire V Groove Feed Roll 1.0/1.2mm Hard Wire V Groove Feed Roll 1.2/1.6mm Hard Wire V Groove Feed Roll 10/1.2mm Soft Wire U Groove Feed Roll 1.2/1.6mm Soft Wire U Groove Feed Roll 1.6/2.0mm Soft Wire U Groove Feed Roll 1.0/1.2mm Cored Wire V Groove Feed Roll 1.2/1.6mm Cored Wire V Groove Feed Roll

TS412X3545EL TS415X3545EL

4m Spitfire 450A MIG Gun 5m Spitfire 450A MIG Gun

fabricator family brochure.qxp

2/4/08

09:59

Page 6

Fabricator 450II Separate with VF4ECII Wire Feed Unit MIG (GMAW) Transformer Rectifier Machine Machine Specifications Input Voltage Input Frequency Output range Rated Output @ Duty Cycle Arc Voltage Range Voltage Settings Dimensions (HxWxD) Weight

3ph. 400v 50/60 Hz 40 – 520 Amps 60% @ 400A 19.5 - 56v 30 1400 x 470 x 770 mm 165 kg

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

1 - 19 m/min 4 Roll Geared Hard Wire Soft Wire Cored Wire

The Fabricator 450II Separate with VF4ECII Wire Feed Unit is a three phase, 520A MIG machine with 30 Voltage settings, digital meters and micro processor control.

Easy to use with the heavy industrial user in mind, the Fabricator 450II has the power to cope with almost any application. With robustness and reliability as standard, the option of water cooling is made easy by the addition of a purpose built water cooler with flow switch protection. Copper wound transformers are standard giving 520A output with outstanding welding characteristics.

Features:

0.6-1.6mm 0.8-1.6mm 0.8-1.6mm

• Thermal Overload Protection with Indicator • Spot Timer Control • Stitch Timer Control • Adjustable Burnback Control • Trigger Latching Facility

Part No - 10-9406

Fabricator 450A Separate system with 1m interconnection A/C, 1.0/1.2 mm drive rolls, earth cable & clamp, feeder wheel kit, mains cable and operating manual

• Electronic Feedback of Wire Speed • Voltage and Amp Meters at WFU • Pre and Post Gas Control • Initial Speed Control • Water Cooler System Protection • Easy Fit Water cooler • 2 Years Warranty OPTIONS AND ACCESSORIES Part No. A.028 VM0264 VM0265 VM0268 VM0263 VM0266 VM0267 U45806 U45810 U45812 U45820 U45822 U45826 U45830 U45832

Description Water Cooler c/w fittings 1m Interconnecting cable assy w/c 5m Interconnecting cable assy w/c 10m Interconnecting cable assy w/c 1m Interconnecting cable assy a/c 5m Interconnecting cable assy a/c 10m Interconnecting cable assy a/c 0.6/0.8mm Hard Wire V Groove Feed Roll 1.0/1.2mm Hard Wire V Groove Feed Roll 1.2/1.6mm Hard Wire V Groove Feed Roll 10/1.2mm Soft Wire U Groove Feed Roll 1.2/1.6mm Soft Wire U Groove Feed Roll 1.6/2.0mm Soft Wire U Groove Feed Roll 1.0/1.2mm Cored Wire V Groove Feed Roll 1.2/1.6mm Cored Wire V Groove Feed Roll

TS412X3545EL TS415X3545EL

4m Spitfire 450A MIG Gun 5m Spitfire 450A MIG Gun

fabricator family brochure.qxp

2/4/08

09:59

Page 7

Fabricator 500 E Separate with VF4E Wire Feed Unit MIG (GMAW) Thyristor Controlled Machine The Fabricator 500 E is a DC constant voltage thyristor

Machine Specifications Input Voltage Input Frequency Output range Rated Output @ Duty Cycle

Arc Voltage Range Voltage Settings Dimensions (HxWxD) Weight

controlled power source with VF4E fully enclosed 4 roll

3ph. 400v 50/60 Hz 25 – 500 Amps 35% @ 500A 60% @ 450A 100% @ 340A 11 - 44v Variable 860 x 465 x 895 mm 140 kg

drive, heavy duty wire feed unit. This rugged unit is designed for MIG (GMAW) and Flux Cored Arc Welding (FCAW) in all medium to heavy fabrication and heavy maintenance applications.

Features: • Thermal Overload Protection with Indicator • Reverse Polarity Facility • Spot Timer Control • Stitch Timer Control • Adjustable Burnback Control

Wire Feed System Specifications

• Trigger Latching Facility

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

• Voltage and Wire Feed Speed Control at Feeder

Part No - 10-9409

1.5 - 20 m/min 4 Roll Geared Hard Wire 0.6-1.6mm Soft Wire 0.8-1.6mm Cored Wire 0.8-1.6mm

Fabricator 500 E Separate with VF4E Wire Feed unit complete with feed rolls for 0.8/1.6mm solid wire, 1m interconnecting cable, earth cable and clamp, swivel mount feeder trolley, mains cable and operating manual

• Variable Voltage Control • Variable Inductance Control • 2 Years Warranty

OPTIONS AND ACCESSORIES Part No. 030354-1 030356-1 030350 U45608 U45612 U45610 U45617 U45618

Description 5m interconnecting cable 10m interconnecting cable for water/air Thermal Arc ‘Cooler MIG’ Integrated Water Cooler Kit with water hoses and fittings 0.8/1.0mm Solid Wire Feed Roll 1.2/1.6mm Solid Wire Feed Roll 1.2/1.6mm Aluminium Feed Roll 1.2/1.6mm Cored Wire Feed Roll 2.0/2.4mm Cored Wire Feed Roll

TS412X3545EL TS415X3545EL

4m Spitfire 450A MIG Gun 5m Spitfire 450A MIG Gun

fabricator family brochure.qxp

2/4/08

09:59

Page 8

Thermadyne UK Tel: (44) 1257 261755

Fax: (44) 1257 224800

Thermadyne Italia Tel: (39) 0236546801

Fax: (39) 0236546840

www.thermalarc.com