TransNet NZ Ltd LV Juice - August 2019

AS/NZS 4836:2011

September 2019

LV JUICE

ARE YOU COMPLIANT?

FREE WHILE STOCKS LAST

WHITTAKERS CHOCOLATE BAR When you spend over $300 (excl GST) on one invoice this month

www.transnet.co.nz

This Month IPC TECHNOLOGY

PAGE 2

NEW ASBESTOS HANDLERS KIT PAGE 7

CHANNELL SHIELD LID COVERS

PAGE 8

IPC TECHNOLOGY

INsulation

IPC Technology, like other connector technologies, has a specific place where they shine above all others. IPCs use a number of small contact points at a high pressure to ensure an exceptionally good electrical connection.

Technology

Over the years, IPC technology has been developed and tested to ensure it can accommodate heat cycling, climatic ageing, electrical resistance, water resistance and dielectric resistance. The modern IPCs you'll find on networks throughout New Zealand and the world incorporate all these advancements as well as a range of added safety features.

Piercing SAFETY FEATURES:

PRODUCT FEATURES:

• Safe to install on live circuits (when manufacturers guidelines are adhered to) • Tightening bolt separate to piercing contacts remains permanently deenergised • Cable doesn’t need to be stripped, protecting workers from exposed live cables • Fully insulated housing for worker safety

• Shearhead bolts ensure correct connection pressure everytime • Range taking capabilities reduce the inventory requirements • Connectors accept both Al and Cu cable (unless specified) • By not stripping the cable, contact teeth can make contact with cable before oxidisation takes place

Shearhead Bolt Separate Tightening Bolt

• Completely seals around contact points for watertight connection • All connectors come with contact grease

All our connectors are designed and tested to fit to majority types of cables made in accordance with the European Standard HD 626, regardless if cables are insulated with XLPE, PE or PVC. The products are tested according to national specifications such as NFC, VDE, BS, ESI and where possible in accordance to CENELEC EN 50483-4.

These standards include tests to verify reliable operation even in the harshest environments: • designed for installation from –20°C up • no change in contact resistance and to +50°C, temperature after overloads and load cycling, • operation experience with temperatures ranging from –60°C up to +60°C, • voltage withstand to 6kV after heavy Tinned Piercing Contacts weathering exposure (UV-light, humidity • no limitation of mechanical loads for and temperature cycling), main & branch conductors, Rubber Seals • corrosion resistance of metal parts • shear head forces are adapted to Around Contacts proven in salt fog chamber and wet SO2 the required contact forces for each gas chamber. application (main, service, lightning), Fully Insulated Connector Housing

End Cap • voltage withstand to 6kV in a 30cm

waterbath,

BEFORE INSTALLATION

DURING INSTALLATION

AFTER SHEAR HEAD BREAKING

Connector easily positioned over cables, no loose parts can fall to ground. The correct position of the branch conductor can be felt inside the end cap.

Contact blades pierce the insulation and reliably contact the conductors.

The tightening screw is insulated from the contact blades thus providing maximum safety for the installer even during live line installations.

The shear head ensures that conductors are not damaged by too strong forces. The long neck prevents the head from hasty shearing off by naturally applied cantilever loads on the tightening tool. The seals firmly conform to the insulation to prevent any moisture ingress.

Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

www.transnet.co.nz

LV CONNECTIONS MADE EASY APATOR FUSE SWITCH DISCONNECTS The Pro series of RBK switch disconnectors is designed for the distribution of electricity and protection of electrical equipment against shortcircuits and overloads with industrial fuse links, and is suitable for installation in low voltage distribution boards, cable and metering cabinets.

HIGH QUALITY MATERIALS • Thermoplastic parts made of fibre glass strengthened polyamide with halogen-free flame retardant added and with the highest possible flammability class -V0 • Three pole main base with spring-loaded contacts designed for connection of circular or sector-shaped conductors • Conductors with lug terminals or bars • Removable cover with fuse links • Arc chutes with steel deionization plates over top contacts • Silver plated contacts provide low power loss

Vertical disconnects also available.

optional 316 stainless steel & geomet 321 coated components RBK disconnectors can come with 316 Stainless Steel & GEOMET® 321 coated components in place of the plated components, providing high corrosion resistance for coastal environments – ask us for more info.

MOUNTING On mounting plate • RBK 00 Pro • RBK 1 Pro • RBK 2 Pro • RBK 3 On double DIN rail • RBK 00 Pro

This range conforms to EN 60947-1, EN 60947-3, IEC 60947-1 and IEC 60947-3 standards.

LV MULTI-PURPOSE CONNECTOR BLOCKS XK2 connector blocks are designed for a wide variety of electrical systems. They are a perfect upgrade for busbars, traditional power distribution blocks and strip connections.

The unique socket design provides customers safe and reliable installation.

EIGHT BLOCKS

FEATURES • Provides hundreds of input/output combinations with internal and external parallel connection methods, giving wiring professionals remarkable flexibility • Low-cost and reliable contact point design • Sizes available from 10mm²–300mm² in and 1mm²–50mm² out Cat No. TNXK235/10X4 TNXK235/4X9 TNXK250/10X6 TNXK270/10X8 TNXK270/16X6 TNXK295/25X4 TNXK2120/16X8 TNXK2185/35X8

Voltage (V) 690 690 690 690 690 690 690 690

• Can be mounted on TN 35 DIN rail or on base-plate • Passed UL 94 V-0 flammability test • IEC 60529 IP20 rated safety protection • IEC standard colour code (blue, red, yellow, green, and yellow-green) • Fit for IEC 60947-7-1

Amp Rating (A) 125 125 150 192 192 232 309 353

Input Cable Size 10-35 mm² 10-35 mm² 16-50 mm² 25-70 mm² 25-70 mm² 25-95 mm² 35-120 mm² 70-185 mm²

HUNDREDS OF INPUT/ OUTPUT COMBINATIONS

Output Cable Size & Quantity 4 X 2.5-10 mm² 9 X 1-4 mm² 6 X 2.5-10 mm² 8 X 2.5-10 mm² 6 X 4-16 mm² 4 X 6-25 mm² 8 X 4-16 mm² 8 X 10-35 mm²

A l l S p e c i a l s a n d P ro d u c t s fe a t u re d i n T R A N S N E T J U I C E a re ava i l a b l e f ro m a l l g o o d e l e c t r i c a l w h o l e s a l e r s .

TNXK235/10X4

QUALITY ESSENTIALS FROM TE CONNECTIVITY

Electrical Terminal Kit

When you need secure insulation, choose Supergrip

CAT NO. TK-22

SUPERGRIP TERMINALS • Fitted with a Copper ferrule and pre-insulated for secure insulation support • Electro tinned Copper to minimise corrosion • Serrated barrel provides secure mechanical and electrical connection • Suitable for terminal blocks KIT FEATURES • 1405 mixed supergrip terminals for 240V/415V applications • Tough metal carry case • Quality ratchet crimping tool (#102/1)

This flame retardant PVC Electrical Tape consists of a plasticised Polyvinyl Chloride film backing, coated on one side with aggressive Rubber-Resin adhesive with good ageing characteristics giving it excellent elasticity and adhesion properties.

Highly conformable and unaffected by moisture and most chemicals, this tape showed no flagging or deterioration even under temperatures as high as 80°C. Can be used for basic insulation, harnessing and general wire wrapping.

Ph 0800 442 182 +64 9 274 3340

Cat No. H2594A H2595A H2596A H2844 H2845 H2848A H3560 H3561 H3562 H3563 H3910 H3911 H3912 H4213 H4215 H4218 H4223 H4225 H4234 H4523 H4514 #102

TECHNICAL DATA • Nominal Dimensions – 0.18mm x 18mm x 20m • Tape backing – PVC • Adhesive – RubberResin Adhesive • Thickness – 0.18mm • Adhesion – >0.45kg/25mm • Tensile strength – >7kg/25mm • Elongation – >100% • Breakdown Voltage – >7kV Cat No.

Colour

ITBK/10 ITBL/10 ITWH/10 ITRD/10 ITY/10 ITG/10 ITRP ITGY/10

BLACK BLUE WHITE RED YELLOW GREEN RAINBOW GREEN/YELLOW

sales@transnet.co.nz

Description 6.3MM QC RECEPTACLE RED 6.3MM QC RECEPTACLE BLUE 6.3MM QC RECEPTACLE YELLOW 6.3MM QC TAB RED 6.3MM QC TAB BLUE 6.3MM QC PIGGY BACK ADAPTOR 6.3MM QC RECEPTACLE RED 6.3MM QC RECEPTACLE BLUE 6.3MM QC RECEPTACLE YELLOW 4.8MM QC RECEPTACLE RED WINDOW CRIMP LINK RED WINDOW CRIMP LINK BLUE WINDOW CRIMP LINK YELLOW 4.3MM SUPERGRIP RING TERMINAL RED 5.3MM SUPERGRIP RING TERMINAL RED 6.4MM SUPERGRIP RING TERMINAL RED 4.3MM SUPERGRIP RING TERMINAL BLUE 5.3MM SUPERGRIP RING TERMINAL BLUE 6.4MM SUPERGRIP RING TERMINAL YELLOW 4.3MM SUPERGRIP FORK TERMINAL BLUE 4.0MM SPADE CONNECTOR CRIMPING TOOL

Quantity 50 100 50 50 100 50 50 50 40 50 50 50 25 100 100 80 100 70 40 100 100 1

Insulation Tape

www.transnet.co.nz

MAINS ENTRY SOLUTIONS

SHEAR BOLT CONNECTIONS

Won’t shatter

Perfect connection every time

No bare parts

OVERHEAD SECURE SCREW

SAVE TIME

Captive Stainless Steel cover screw

TNMEB FEATURES • Main cable supported by gland in gland plate • Gland plate perfect fit for conduit gland too • Strip length clearly outlined on connector body • Electrical test points and test point caps built into connector bolt for ease of testing • Insulated bimetallic connectors will terminate AL/CU cables, 4mm²-35mm² range

SAFER

Cable port

Make off connectors outside enclosure Insulated Bimetallic connectors for Al or Cu Housing Cover

Captive Stainless Steel Screw

UNDERGROUND OPTIONAL

MADE IN NEW ZEALAND

Embossed labeling

Housing Base Gland Plate for Cable Entry

zs 3820: /n

teste 200

Cable Gland

d to

a 9 +

1

BOX 1, 2 & 3 PHASE

UV STABLE PLASTIC

as

MAINS ENTRY

USE WITH HOUSE HOOK

CAT NO. 0-708046-3 Cable Size (AS3560): 9-17mm O.D.

STRAIN CLAMPS These LV strain clamps for neutral screen have wedge technology so the more the cable is pulled, the tighter the grip becomes. These clamps grip one cable from 9-25mm OD. Cable Type: Neutral screen

Galvanised Steel threaded hook, used as an anchor point for securing LV shackle insulators. Simple to install and remove.

175X12mm C/W, 25mm diameter hook I.D

Body: Glass Filled Nylon Straps: Stainless Steel

CAT NO. HOUSEHOOK CAT NO. 0-708018-1

Cable Size (AS3560): 18-25mm O.D.

Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

www.transnet.co.nz

TOOLS FOR ALL APPLICATIONS

POST HOLE DIGGER FEATURES • • • •

Heavy duty blades 1.2m long wooden handles 160mm spread Made in the USA Cat No. PHD

VARIOTQ 1000V VDE SCREWDRIVER SET

Description HERCULES POST HOLE DIGGER

SPADE FEATURES • Wooden D-handle • Tapered blade design • 405x165x105mm blade, 710mm long Cat No.

Description

DSPADE

TUBULAR STEEL DRAINING SPADE

This VarioTQ 1000V VDE dynamometric screwdriver set features interchangeable blades, and includes a torque settable handle with a clear perceptible and audible signal when correct torque value is achieved.

FEATURES • Insulated replaceable blade made from molybdenum vanadium steel, hardened, blasted, with hexagonal shaft • 1-6Nm torque range • Kit supplied in robust nylon bag (with belt loop and hook and loop closure) • Additional blade options on request

Ph 0800 442 182 +64 9 274 3340

Cat No.

Description

Torque Range (Nm)

102708/PZ

1000V VDE SET – BLADES INCLUDE 2 × SLOTTED, 2 × PZ, 2 × SQ

1-6

sales@transnet.co.nz

Type

www.transnet.co.nz

NEW! ASBESTOS HANDLERS BASIC KIT

new Product

This kit contains personal protective equipment suitable for exposure to small amounts of asbestos.

The kit incorporates an AlphaTec 1500 FR coverall, a highly breathable, flame retardant and anti-static SMMS polypropylene nonwoven designed for protection from particulates and light, non-flammable liquid spray or splash. This garment is anti-static, air and water vapour permeable (“breathable”) to help reduce the risk of heat stress and is intended to be worn over the top of Garments which achieve existing minimum Arc Flash protection requirements.

RE-ORDER CODE: ASPHP-TN

TYPE 5 5TYPE TYPE 5TYPE 6TYPE 5 TYPE 6 6TYPE EN 1073-2 6TYPE EN 1073-2 6EN 1073-2 EN EN1073-2 ISO EN EN 14116 1073-2 ISO EN14116 ISOEN 14116 ISO EN EN14116 1149-5 ISO EN14116 1149-5 EN 1149-5 EN 1149-5 EN 1149-5

KIT CONTENTS: Cat No. M15P-FR-2XL N95-DBV NTBL BCMP001 1715C PBA200 CABLETIE

Description

Quantity

ALPHATEC® 1500 PLUS COVERALL - 2XL N95 DUCK BILL MASK WITH VALVE BLACK DRAGON NITRILE GLOVES - SIZE: L (PAIR) MICROPOROUS BOOT COVER - (PAIR) CLEAR LENS SAFETY GLASSES - (PAIR) PRINTED ASBESTOS BAG 200MU, 900MMX1200MM CABLE TIES

1 1 2 1 1 2 2

Ph 0800 442 182 +64 9 274 3340

sales@transnet.co.nz

www.transnet.co.nz

IT'S TIME TO PUT A LID ON IT Channell SHIELD Cover Sets

TransNet New Zealand Ltd Auckland 78 Cryers Road East Tamaki Auckland NEW ZEALAND Ph 0800 442 182 Fax 0800 442 183 PO Box 39 383 Howick, Auckland Wellington 10 Petone Ave Petone Wellington NEW ZEALAND Ph 04 576 2530 Fax 04 576 0040 PO Box 39 383 Howick, Auckland NEW ZEALAND

SHIELD covers are designed to never break! They offer a lid weight reduction of 50% over concrete and polymer concrete, and over 70% when compared to cast iron. SHIELD’s lighter weight design cover reduces craft injuries while improving health and safety specifications.

Consumers also benefit from SHIELD’s patented anti-slip design and anti-trip features. SHIELD’s cover tread design offers 20% greater slip resistance when compared to concrete, polymer concrete, steel or cast iron covers. SHIELD meets and exceeds Australia AS4586 skid specification, the highest global standard in the world!

FEATURES • EST™ (Endurance Stress Testing) 3 Million Cycles • Designed to meet or exceed: 150kN = 15 tnf (Tons-force) • Telecordia GR-902-CORE • Western Underground Committee Guide 3.6 • ANSI/SCTE 77 2013-TIER 22 • EN124 Class B125

Composite Cover Heavy Duty

sales@transnet.co.nz TransNet Tonga Ma’ufanga Small Industries Ma’ufanga TONGA Ph +67 627 939 Fax +67 627 976 PO Box 2932 Nuku'alofa TONGA transnet@kalianet.to

SHIELD COVER SET STANDARDS SHIELD cover sets comply to the following standards APPLICATION Design GVM Nominal (Installation / Wheel load (kg) Location) Load (kg) (kN) Non-vehicular traffic Light Duty limited to pedestrians 670 335 6.7 Pedestrian Only & cyclists. Areas closed to other traffic Areas where vehicular Medium Duty traffic is limited to Non-Deliberate footways and light 5,300 2,650 53 (Incidental) tractor paths or Traffic livestock

LOAD PERFORMANCE SPECIFICATION CATEGORY CATEGORY AS/NZ 3996:2006

Class A

AS/NZ 3996:2006

Class B

Test Load (kN)

10

80

For more information please contact your local rep.

TransNet NZ Ltd has made every reasonable effort to ensure the accuracy of this information and it is to the best of our knowledge correct and reliable. Under no circumstances does this constitute an assurance of any particular quality or performance and users should independently evaluate the suitability of products for their desired application. All information in this publication including pricing, drawings, illustrations, images and graphic designs are reflections of our current understanding. TransNet NZ Ltd reserves the right to make any adjustment to this information at any time. Our liability for the products outlined in this publication is set forth in our standard terms and conditions of trade. In case of any potential ambiguities or questions, please contact us for clarification.

are you compliant?

SALES@TRANSNET.CO.NZ | 09 274 3340

AS/NZS 4836 :2011 SAFE WORKING ON OR NEAR LOW-VOLTAGE ELECTRICAL INSTALLATIONS & EQUIPMENT SECTION 9: PERSONAL PROTECTIVE EQUIPMENT This Standard states the minimum requirements for Personal Protective Equipment (PPE) for working on or near Low Voltage Installations and Equipment.

Not sure if this relates to you? Give us a call and we can advise you what PPE equipment you're required to have and whether yours is up to scratch.

FAILED GLOVE UNDER TEST _

Some PPE requires In-Service testing

TransNet HV Test Laboratory 78 Cryers Road East Tamaki, Auckland

GLOVES • MATS • BLANKETS • BOOTS

Glove Test Report Customer:

Transnet

Report Number:

TNHV201874

Are you interested in reduced lead times for testing? All your TransNet gear will be ready to go into service as soon as it's in your hands.

Equipment Description: Make:

SALISBURY

Test Procedure: GLOVES CLASS 0 Serial Number:

GL201874

Test Date:

22/08/2019

Model:

E011Y-9

CLASS:

0

Retest Date:

22/02/2020

Test Results: Applied Standard:

ASTM F0496

Visual Inspection:

PASS

Electrical Test Results

Applied Voltage: 5000V

Serial:

GL201874LH Current t0 (mA):

4.1 mA

Current t60 (mA): 4.1 mA

Result:

PASS

Serial:

GL201874RH Current t0 (mA):

4.1 mA

Current t60 (mA): 4.1 mA

Result:

PASS

Test Result (PASS/FAIL):

PASS

Comment:

Test Equipment:

120KV AC DIELECTRIC TEST SET PHENIX TECH

Serial Number:

19-3409

Calibration Due: 17/06/2020

Tested By:

Garry Tucker

Approved By:

With the introduction of a new on-site HV test lab at our Auckland premises we're able to speed up the process of getting your TransNet equipment tested prior to delivery, or alternately to save you the trouble of sending it away to be tested afterwards. This in-house lab fully streamlines the process of purchasing TransNet products that require inspection and testing, allowing us to test items quickly and efficiently, ensure that they are fully compliant, and send them out directly to you to be put into immediate use.

Have a specific testing requirement? Talk to your local rep or contact customer services today to find out what we can do for you.

TRANSNET OFFERS FREE TESTING OF NEW PRODUCTS

Phillip Hogg

If you require

insulating gloves • Pure latex gloves manufactured under ISO 9001 & ISO 14001 • Certified to EN 60903 • Also available in ASTM D120 • Excellent strength & durability Class Colour

Max Use* Voltage CLASS AC/DC 00 CLASS 00 1 T

00 BEIGE

500/ 750

Illustrative Labelling

ANSI ASTM D120 EN60903 ANSI ASTM D120 MAX USE 500 VEN60903 AC ANSI D120 MAX USE 500 VEN60903 AC TYPEASTM 1 USE ANSI D120 MAX 500CLASS VEN60903 AC 00 TYPEASTM 1 10 ANSI ASTM D120 MAX 500CLASS VEN60903 AC 00 10 TYPEASTM 1 USE ANSI D120 MAX USE 500CLASS VEN60903 AC 00 10 TYPE 1 CLASS MAX USE 500 V AC 00 YPE 1 10 TYPE 1 10 CLASS 00 TY CLASS E00 PUSE MAX ANSI ASTM D120 EN60903 TYPEASTM 1 10 CLASS 00 T Y PVUSE MAX EAC1 1,000 ANSI D120 EN60903 MAX USE 1,000 V AC 1,000 AC MAX V USE ANSI ASTM D120 EN60903 CLASS 0 MAX USE 1,000 V AC MAX USE 1,000 AC CLASS 0 TYPEMAX 1 USE10 ANSI ASTM D120 EN60903 CLASS T Y PVUSE 1,000 EN60903 V AC EAC011 MAX 1,000 V CLASS 0 TYPE 1 ANSI ASTM D120 T CLASS MAX USE 1,000 V AC Y P EAC0 10 1,000 MAX CLASS 0 TYPE 1 ANSI ASTM D120 EN60903 1 CLASS 0 T Y PVUSE MAX USE 1,000 V AC 1,000 CLASS 0 TYPE 1 USE10 CLASS T Y PVEEAC01 1,000 V AC CLASS 0 TYPEMAX 1 10 T Y PUSE CLASS E 01 10 MAX ANSI ASTM D120 EN60903 CLASS 0 TYPE 1 1 T MAX Y PVUSE EAC 7,500 10 ANSI MAX ASTM D120 EN60903 USE 7,500 V AC 7,500 V AC MAX USE1 CLASS ANSI ASTM MAX USED120 7,500 EN60903 V AC MAX USE 7,500 V AC TYPE 1 CLASS 1 CLASS 1 1 T ANSI ASTM D120 EN60903 7,500 EN60903 V AC EAC1 10 PVUSE MAX 7,500 TYPEMAX 1 USE CLASS 1 TY ANSI ASTM D120 CLASS 1 Y MAX USE 7,500 V AC E 10 P 7,500 AC MAX TYPEMAX 1 USE10 CLASS 1 ANSI ASTM D120 CLASS 11 T Y PVUSE 7,500 EN60903 V AC 7,500 TYPEMAX 1 USE10 CLASS 1 CLASS T Y PVEEAC11 7,500 V AC TYPE 1 CLASS 1 1 T CLASS 1 YPE 10 MAX ANSI ASTM D120 EN60903 TYPE 1 CLASS 1 1 T Y PUSE MAX USE 1,7000 VEAC 10 ANSIMAX ASTM USED120 17,000EN60903 V AC 1,7000 V AC MAX USE ANSI ASTM D120 EN60903 CLASS 2 MAX USE 17,000 V AC MAX USE 1,7000 V AC TYPE 1 CLASS 2 ANSI ASTM D120 EN60903 CLASS 21 T MAX USE 17,000 V AC Y E 10 P MAX 1,7000 V AC TYPE 1 USE10 CLASS ANSI ASTM D120 T Y PUSE CLASS 21 MAX 17,000EN60903 V AC 2 1,7000 VEAC MAX USE TYPE 1 CLASS ANSIMAX ASTM D120 CLASS T Y P E 21 17,000EN60903 V AC 2 10 1,7000 TYPE 1 USE CLASS 21 T Y PVEAC MAX 17,000CLASS V AC 2 10 TYPE 1 USE10 CLASS 2 T Y PUSE CLASS E 21 MAX ANSI D120 EN60903 TYPEASTM 1 10 CLASS 2 1 T Y PUSE MAX 26,500 VEAC ANSIMAX ASTM USED120 26,500EN60903 V AC 26,500 V AC MAX USE CLASS 3 ANSI ASTM D120 MAX 26,500EN60903 V AC MAX USE 26,500 V AC TYPE 1 USE CLASS 3 CLASS 31 T Y PUSE ANSI ASTM D120 EN60903 MAX USE10 26,500EN60903 V AC 3 EAC MAX 26,500 V TYPE 1 CLASS 1 T ANSI ASTM D120 CLASS 3 Y PVEAC MAX USE10 26,500CLASS V AC 26,500 MAX TYPE 1 USE ANSI ASTM D120 CLASS 31 T Y PUSE MAX 26,500EN60903 V AC 3 26,500 TYPE 1 USE10 CLASS 31 T Y PVEEAC MAX 26,500CLASS V AC 3 TYPE 1 10 CLASS 3 T Y PUSE CLASS E 31 10 MAX ANSI ASTM D120 EN60903 TYPE 1 CLASS 3 1 T MAX Y PUSE 36,000 VEAC ANSIMAX ASTM D120 USE10 36,000EN60903 V AC 36,000 V AC MAX USE ANSIMAX ASTM D120 36,000EN60903 V AC CLASS 4 MAX 36,000 V AC TYPE 1 USE CLASS ANSI ASTM D120 CLASS 41 T Y PUSE MAX 36,000EN60903 V AC 4 10 MAX TYPE 1 USE CLASS 4 36,000 VEAC ANSI ASTM D120 EN60903 1 T Y PUSE CLASS 4 MAX USE 36,000 V AC E 10 36,000 V AC MAX TYPE 1 USE10 CLASS ANSI ASTM D120 MAX 36,000EN60903 V AC 4 CLASS 41 T Y PUSE 36,000 TYPE 1 CLASS 4 CLASS 41 T PVEEAC MAX 36,000CLASS V AC 4 TYPE 1 USE10 TY CLASS Y P E 41 must have 10 Insulating Gloves and Sleeves TYPE 1a colour T YPE 1 10 CLASS 4 MAX USE MAX 500 VUSE AC 500 VUSE AC MAX MAX 500 VUSE AC E1 P MAX 500 VUSE AC TY CLASS YP E00 500 VUSE MAX 1 CLASS 00 T Y P AC E00 500 CLASS 1 T V AC

0 RED

1,000/ 1,500

1 WHITE

7,500/ 11,250

2 YELLOW 17,000/ 25,500 3 GREEN

26,500/ 39,750

4 ORANGE 36,000/ 54,000

coded label to meet appropriate ASTM Specifications.

*Max Usage Voltage when worn with leather protectors

we supply

marigold • Outer protector gloves custom designed to perfectly complement the Marigold rubber insulating glove • Manufactured without the use of solvents & hazardous chemicals utilising a proprietary aqueous dipping process • Acid resistant • Ozone resistant • Low temperature resistant • Comprehensive range of classes, colours, lengths & sizes, including half sizes • Various cuff styles available including straight, contour & bell • Arc Flash certified

If you require

we supply

Eye Protection • AS/NZS 1337.1:2010 standards certified • Anti-fog / Anti-scratch coated on both sides Cat No. E4000 E4002 E4004

xSpex

• Stylish wrap-around design with TPR side arm grip-pads, soft tips for superior comfort and a non-slip fit

Description XSPEX SAFETY SPEC

Lens CLEAR SMOKE BRONZE

If you require

we supply

footwear

Bison

• Meets requirements of AS/NZS 2210.1 • Wide and Extra-wide fit options minimise excess toe space trip hazard and eliminate rub-zones • Nitrile rubber outsole offers extreme Cat No. XTZ-100

Description ZIP LACE UP SAFETY BOOTS BLACK

protection up to 300°C • NZ Tasman Pro-Tec water resistant leather upper

Size STANDARD 4-14 EXTRA WIDE 8-11

If you require

we supply

Height safety

Millar

AIR CORE TOWER WORKER HARNESSES • Certified to Australian and NZ Standards AS/NZS 1891.1 - 2007 • Corrosion-resistant and longer lasting aluminum hardware • Easily adjustable waist, shoulder and leg straps to suit a wider range of physiques Cat No. M1020225 M1020228

Frontal Fall Arrest Attachment Loops NON-METALLIC SOFT LOOP

• Quick-connect leg and chest buckles for easy donning • Aluminum rear fall arrest d-ring with fall indicator • Work positioning side d-rings for working with pole straps

Sizes S-2XL M-2XL

If you require

we supply

flame resistant gloves

eureka

• Flame resistant • Optimized for medium Arc Flash risks • Cat II protection

• Arc Flash ASTM F2675, ATPV = 30 cal/cm² palm, 5.8 Cal/cm² back of hand

Cat No. 13-4HFR

Description FLAME RESISTANT ARC FLASH GLOVES

Sizes XS-2XL

AS/NZS 48

compliant saf

836:2011

fety products

If you require

we supply

protective clothing • 215gsm Woven Lenzing Blend fabric • Inherently Flame Retardant, Antistatic and Arc Flash Protection

• All finishes Bartacked • Twin Stitch FR Reflective Tape • 2 large pockets with velcro closures

Cat No.

Description ARC ARMOUR TTMC-W17 ARC AA215OVERALL RATED OVERALL ORANGE/NAVY ARC ARMOUR TTMC-W17 ARC AA215JACKET RATED JACKET AA215PANT ARC ARMOUR CARGO PANTS NAVY

If you require

Hearing Protection

Size 4-15

we supply

VORTEX & E-MAXX

E-MAXX33 CLASS 5 FOLDING EARMUFFS

VORTEX EARPLUGS

• 33dB Class 5 • Hearing protection for noise levels up to 120 dB • AS/NZS 1270:2002 Certified

• SLC80 26dB—protection for noise levels to 110 dB(A) • PU foam Class 5 AS/NZS 1270 certified • Fluoro orange for high visibility

Cat No. E-MAX33 DE200-OU DE100-OC

Description CLASS 5 FOLDING EARMUFF VORTEX EARPLUGS ORANGE UNCORDED 200PK VORTEX EARPLUGS ORANGE CORDED 100PK

If you require

SAFETY HELMETS • Modular AS/NZS 1801:1997 tested safety helmet system • High performance ABS shell • Tested down to -40°C Cat No. NCV NCHV NCSNV

NEXUS • Available in a range of colours • Tested to the performance requirements of AS/NZS 1801:1997

Description NEXUS CORE VENTED NEXUS HEIGHTMASTER VENTED NEXUS SECUREPLUS NON-VENTED

If you require

respiratory protection • AS/NZS1715 & AS/NZS1716 compliant • P2 rating for protection against mechanically and thermally generated particles Cat No. DRP2V

we supply

we supply

breathe easy • AIR8™ exhalation valve for easier airflow • Dual straps give firm and comfortable fit

Description BREATHE EASY DUST MAST P2 WITH VALVE 12PK

If you require

arc flash Protection 40 CAL PREMIUM JACKET & BIB OVERALLS KITS • 40 cal/cm² ATPV Rating • Approximately 60% lighter fabric weight than standard 40 calorie garment • 2 layers – 5 oz/yd² & 6 oz/yd²- Sewn with Nomex® thread • 32" long jacket, 32" inseam overalls • Lightweight 40 Cal hood • Standard or lift front clear hood options • Meets current ASTM F1506 and NFPA 70E standards • Available in sizes S to 3XL Cat No. AFW40-NFJB AFW40LF-NFJB AFW040-CLEAR

we supply

OEL

12 CAL CLEAR FACE SHIELD KIT • 12 cal/cm² Light Tint Visor • Light tint lens gives improved clarity of work environment • Resistant to fogging

Description 40 CAL PREMIUM JACKET & BIB OVERALLS KIT WITH SWITCHGEAR HOOD 40 CAL PREMIUM JACKET & BIB OVERALLS KIT WITH LIFT FRONT HOOD, CLEAR 12 CAL CLEAR FACE SHIELD WITH HARD HAT, VISOR, BAG, SAFETY GLASSES & BALACLAVA

AFW40LF-NFJB

YES, I REQUIRE NEW AS/NZS 4836:2011 COMPLIANT PPE

Have you got your copy of the TransNet Safety Catalogue?

To view our complete range of safety products and ensure your gear is AS/NZS 4836:2011 compliant please contact your local rep for a copy or view online at www.transnet.co.nz/catalogues

EYE PROTECTION FACE SHIELD ARC FLASH SUIT & HOOD FOOTWEAR INSULATING GLOVES FLAME RESISTANT GLOVES HEARING PROTECTION PROTECTIVE CLOTHING HEIGHT SAFETY / FALL PROTECTION SAFETY HELMETS RESPIRATORY PROTECTION

☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐ ☐

For more info on our Safety range and to place an order:

Ph: 0800 442 182 Fax: 0800 442 183 Email: sales@transnet.co.nz Web: www.transnet.co.nz

are you compliant?

SALES@TRANSNET.CO.NZ | 09 274 3340