July 2021
LV JUICE A REVOLUTION IN CABLE MANAGEMENT
MULTI-PURPOSE CABLE TIES
E • REL
FEATURES • Patented release and refasten design
US
S E & RE A E
SE & RE EA
E • REL S U
• Temporary hitch to add cables • Practical single unit solution • UV and weather resistant • Saves time and money • Add cables as you go • Stainless steel nail included • Easy to use • Recyclable • Bundle diameter range 20-50mm
FREE WHILE STOCKS LAST
MUL-TIE 22CM 50 PACK
BAD BAKER SHORTBREAD When you spend over $300 (+GST) on one invoice this month
This Month www.transnet.co.nz
MT00122
WHAT MAKES RAYCHEM THE INDUSTRY LEADER?
PAGE 3
AIRSTOP CABLE/DUCT ENTRY SEALS
PAGE 5
BALMORAL CONDUCTOR COVERS
PAGE 7
MAINS ENTRY SOLUTIONS
TRANSNET
UV STABLE PLASTIC Won’t shatter
MAINS ENTRY BOX
SAVE TIME Make off connectors outside enclosure
The faster, safer, easier-to-install Mains Entry Box
SHEAR BOLT CONNECTIONS Perfect connection every time
The mains entry termination has never been so safe, sleek or easy to install. Made of durable and UV stable black plastic, our TNMEB has been designed to make installation of overhead mains entry points as safe, quick and as simple as possible.
SECURE SCREW Captive Stainless Steel cover screw SAFER TO INSTALL No bare parts Cable port
FEATURES
Insulated Bimetallic connectors for Al or Cu
• Main cable supported by gland in gland plate
Housing Cover Captive Stainless Steel Screw
• Gland plate perfect fit for conduit gland too • Strip length clearly outlined on connector body
• Insulated bimetallic connectors will terminate AL/CU cables, 4mm²-35mm² range
Housing Base Gland Plate for Cable Entry Cable Gland
Embossed labeling
as
CAT NO. TNMEB1PH 1 Phase CAT NO. TNMEB2PH 2 Phase CAT NO. TNMEB3PH 3 Phase
OVERHEAD UNDERGROUND OPTIONAL
MADE IN NEW ZEALAND
zs 3820: /n
teste 200
d to
a 9 +
1
• Electrical test points and test point caps built into connector bolt for ease of testing
TE CONNECTIVITY
ESSENTIAL EQUIPMENT
HOUSE HOOK
STRAIN CLAMPS CAT NO. 0-708046-3 Cable Size (AS3560): 9-17mm O.D.
These LV strain clamps for neutral screen have wedge technology so the more the cable is pulled, the tighter the grip becomes. These clamps grip one cable from 9-25mm OD. Cable Type: Neutral screen Body: Glass Filled Nylon Straps: Stainless Steel
Galvanised Steel threaded hook, used as an anchor point for securing LV shackle insulators. Simple to install and remove. 175X12mm C/W, 25mm diameter hook I.D
CAT NO. HOUSEHOOK Ph 0800 442 182 +64 9 274 3340
CAT NO. 0-708018-1
Cable Size (AS3560): 18-25mm O.D.
sales@transnet.co.nz
www.transnet.co.nz
RAYCHEM HEATSHRINK TECHNOLOGY
dwp thin wall heatshrink Semi-flexible, general purpose adhesive-lined, moisture proof heatshrinkable tubing, with high shrink ratio. DWP heatshrink is designed to provide moisture proof sealing to a wide range of substrates such as electrical wire splices, cable jackets, wire breakouts and electrical components. APPLICATIONS • Environmental sealing • Cable insulation • Connector insulation for control wiring
rayrim protective self-adhesive edging material Raychem Rayrim edging material is an extruded strip internally coated with a heat activated adhesive, so that on heating the profile changes from a “V” to a “U” section and the adhesive bonds to the substrate profile. Rayrim's profile offers a clean and rapid means of covering edges. Its robustness allowas Rayrim to give protection under the most testing circumstances.
TECHNICAL DATA • Operating Temperature -55°C to 110°C • Minimum shrink temperature 80°C • Minimum full recovery temperature 110°C • Shrink ratio 3:1 • Black (clear ATUM 40/13 only) • Adhesive lined APPROVALS UL E85381 (Black only) MIL-DTL-23053/4 Class 3 (Black only) 3:1 Shrink ratio only (excludes sizes 9/3,19/6) VG 95343 (clear 3:1 only) VDE 0341/Pt 9012 (clear 3:1 only)
FEATURES • Manufactured from a Raychem radiation crosslinked polyolefin material • Adhesive lining enables excellent adherence to many substrates • Covers metal, wood and glass edges • All round protection • Flexible • Applicable to both internal and external radii, as well as straight edges • ROHS Compliant • Wide Operating Temperature Range -55°C to 80°C Cat No.
Supplied profile Recovered profile
RAYRIM-NR6-0-STK RAYRIM-NR7-0-STK RAYRIM-NR8-0-STK RAYRIM-NR9-0-STK
Plate Thickness Length (mm) SWG mm 30-24 0.31-0.56 1200 23-16 0.61-1.63 1200 15-10 1.83-3.25 1200 9-5 3.66-5.38 1200
TRANSNET MONTHLY GIVEAWAY SUPPORTING KIWI BUSINESSES Who doesn’t love a good old-fashioned cookie? We’re certainly fans here at TransNet, so we’ve jumped at the opportunity to work with a local company that appreciates great baking. Bad Baker is a family business based in Auckland
Ph 0800 442 182 +64 9 274 3340
that is passionate about their cookies and believes that using quality NZ ingredients makes the difference – something we heartily agree on! We’ve selected their buttery shortbread with toasted
www.facebook.com/badbakernz/
sales@transnet.co.nz
macadamias and chunks of creamy white chocolate for our giveaway this month and we’re sure you’ll soon discover why it’s their most popular flavour.
www.transnet.co.nz
RYANFIRE FIRE PAD RANGE
FIRESTOPPING SOLUTIONS Acoustic Fire Pad
RYANFIRE offers specific firestopping products for specific applications and expertise to assist with providing custom solutions for individual installation requirements. All products supplied by RYANFIRE are comprehensively tested at internationally accredited test laboratories and meet the national building code requirements.
FEATURES • Up to 2 hours fire protection installed MADE IN internally, up to 1 hour installed externally THE UK • Simple to install • Suitable for most drywall applications • Acoustic rated with weighted sound reduction index of 65 in accordance with EN/ISO 7171-1 • Tested to AS1530.4-2005 & AS4072.1-2005 • Tested back to back • Sound Transmission Class: 60
APPLICATIONS Acoustic fire pads are non-setting intumescent putty sheets designed to be a cost-effective and efficient method of firestopping electrical sockets in dry wall fire-rated partitions.
Fire Pad
• Putty Pads can be fitted around the outside of a metal TransNet flush box to achieve both an Acoustic and Fire rating. • Intuputty Pads are not a health, spill or environmental hazard. They are rot proof, do not sustain vermin and will not encourage the growth of fungi, mould or bacteria.
CORRECT INSTALLATION METHODS FOR EVERY APPLICATION
FEATURES • Fire resistance class EL-90 according to MADE IN EN 1366/3 NEW ZEALAND • Tested to AS1530.4-2005 AS4072.1-2005 • 20:1 volume expansion • Suitable for electrical flush boxes such as light switches & socket outlets • Tested with single & double layer GIB walls
In the case of heat or fire, the fire pad develops a high volume expansion (20:1) and a high expansion pressure which causes the complete closure of an opening within a short time in order to prevent the transition of smoke and fire. BEFORE
AFTER
VIEW
THE
RANGE Ph 0800 442 182 +64 9 274 3340
sales@transnet.co.nz
www.transnet.co.nz
AIRSTOP CABLE/DUCT ENTRY SEALS To enable vapour retarders and other materials to fulfil their purpose as airtight layers in a building there must also be air-tight joins at cable entry points. Warm air finds its way inside building components through even the smallest of holes in the vapour retarder, where it then condenses. AIRSTOP Cable Sleeves remove the ability of air to move and cause drafts or condensation, guaranteeing that the construction is wind-tight and air-tight.
FEATURES • Extremely flexible • Resistant to ageing • Integrated sealing plaster for airtight adhesion • Rubber heat-resistant up to 160°C (short term) • Can be applied to the inside or outside of the airtight layer • BRANZ appraised
APPLICATIONS • Cable entry points • Openings for conduits
PRODUCT SPECIFICATIONS EPDM RUBBER, SEALING PLASTER WITH AGE-RESISTANT PURE ACRYLATE ADHESIVE
COMPOSITION TEMPERATURE RESISTANCE OF ADHESIVE OPERATING TEMPERATURE AGE RESISTANCE OF ADHESIVE
AIRSTOP812 AIRSTOP812-DUAL AIRSTOP1522 AIRSTOP2532 AIRSTOP4255 AIRSTOP5070 AIRSTOP7590 AIRSTOP100110 AIRSTOP125135 AIRSTOP150165
-5°C TO +40°C 30 YEARS 9 SIZES COVER FROM 8-160MM O.D. SINGLE ENTRY (8-12MM DUAL ENTRY ALSO AVAILABLE)
CABLE ENTRY RANGE
Cat No.
-40°C TO +100°C
Cable Entry Range Ø (mm) 8 - 12 2 X 8 - 12 15 - 22 25 - 32 42 - 55 50 - 70 75 - 90 100 - 110 125 - 135 150 - 165
14%
OF AIR LEAKAGE
FROM ANY BUILDING
IS CAUSED BY POOR SEALING
OF PENETRATIONS Ph 0800 442 182 +64 9 274 3340
Outer Dimensions (mm) 150 150 150 150 228 228 228 320 350 350
PENETRATIONS
ARE ONE OF
SEVEN MAIN AIR LEAKAGE POINTS sales@transnet.co.nz
Appraisal No.931 [2017]
www.transnet.co.nz
TEST & MEASUREMENT COMBO DEAL
mi3100s
multifunction installation tester
The MI3100S EurotestEASI enables online voltage monitoring, phase sequence testing and earth resistance measurement. EurotestEASI is equipped with integrated characteristics of fuses and RCDs for PASS/FAIL evaluation of test results.
KEY FEATURES • Built-in help screens for referencing on site • Built-in NZ fuse tables for automatic PASS/FAIL evaluation of the line / loop impedance result in accordance to AS/ NZS 3000 • Monitoring of all 3 voltages in real-time • Automatic polarity reversal on continuity test • Loop impedance test without tripping the RCD • Built-in charger and rechargeable batteries as standard accessory • Automated RCD testing procedure
MEASURING FUNCTIONS • Continuity of PE conductors with 200 mA test current with polarity change • Continuity of PE conductors with 7 mA test current without RCD tripping • Insulation resistance with DC voltage from 50V to 1000V
MI3100STL78PROMO
mi3100s + martl78 + bentrod kit
Ph 0800 442 182 +64 9 274 3340
• Line impedance with PSC • Earth loop impedance • Earth loop impedance without tripping the RCD • TRMS voltage and frequency • 3-phase rotation • RCD testing (general and selective, type AC, A, F) • Earth resistance (3-wire method)
STANDARDS • Functionality – EN 61557 • Other reference standards for testing: – IEC/EN 60364-4-41 – EN 61008 – EN 61009 – BS 7671 – AS/NZ 3017 • Electromagnetic compatibility (EMC): – EN 61326 • Safety (LVD): – EN 61010-1 – EN 61010-031 – EN 31010-2-030 – EN 31010-2-032
MARTINDALE 50M GREEN R2 CONTINUITY WIRE
This handy carry case reel contains a high quality continuity cable for earth testing. The cable can be easily retracted by winding it up much like a hose reel. • 50m Green continuity cable • Handy Reel • Easy to use
• Quick connectors • Retractable tidy cable
BENT EARTH PEG • 13mm portable earth rod
APPLICATION • Initial and periodic testing of domestic and industrial installations • Testing of single and multiphase systems • Testing of TT and TN supply systems
$1995.00+GST sales@transnet.co.nz
www.transnet.co.nz
BALMORAL CONDUCTOR COVERS
PANTHER TAIL Panther Tail is a flexible conductor cover with a unique two tone design (black outside, yellow inside) for ease of visual inspection. Perfect for LV applications, Panther Tails meet the requirements of AS 4202 Class I, Appendix B. Available by the metre in lengths up to 60m, with a special zip lock style fastening system, Panther Tails are quick and easy to install and can be cut to fit the required area exactly. FEATURES • Low voltage or high voltage applications • Lightweight and easy to install • Excellent weathering, UV, & abrasion resistance Cat No. TPP15 15mm diameter, sold by metre Cat No. TPP20 20mm dia, 3m lengths with interlocking ends Cat No. TPP35 35mm dia, 3m lengths with interlocking ends Cat No. TPP15-TL Panther Tail installation tool
TPP15-TL
TIGER TAIL Also known as line cover, Tiger Tails provide temporary electrical insulation, mechanical protection and visual warning of power lines and conductors. Used by utilities and electrical contractors, these robust units have decades of engineering and development to ensure the highest quality and safety standards. Made from HDPE plastic with a mechanical interlock fastening system. Certified AS4202, Class I and voltage rated 650V.
balmoral engineering
Cat No. DB.35A 2.5m LONG x 35mm ID, BLACK/YELLOW
Ph 0800 442 182 +64 9 274 3340
sales@transnet.co.nz
www.transnet.co.nz
ENSURE SMOOTH SAILING Shore Power Connection System
Auckland 78 Cryers Road East Tamaki Auckland NEW ZEALAND Ph 0800 442 182 PO Box 39 383 Howick, Auckland Wellington 10 Petone Ave Petone Wellington NEW ZEALAND Ph 04 576 2530 PO Box 39 383 Howick, Auckland NEW ZEALAND sales@transnet.co.nz TransNet Tonga Nuku'alofa Lakalakaimonu Multi Utility Complex Taufa'ahau Road Poutaha Nuku'alofa TONGA Ph +67 627 939 PO Box 2932 Nuku'alofa TONGA transnet@kalianet.to
A waterproof, stylish, and approved shore power connection system for your boat Ratio Electric's Shore Power connection system is the marine standard all over Europe. They have designed the MP16 (16A/250V), MP32 (32A/250V) and MP50 (50A/250V) system to offer a waterproof, stylish and approved shore power connection system for your boat. Every marine product is designed to be user-friendly and still able to withstand the rigours of life at sea.
FEATURES • Based on world standard for outdoor connections (IEC 60309) • Boat inlet with mating connector (moulded or assembled) • Complies with AS/NZS 3004.2014 Placeholder, not for Printing Logo use must be approved Min Size 17mm Height
Cxxxxxx
CABLE CONNECTORS • Includes a weatherproof sealing cap to ensure CE compliance 16A IP56 INLET CONNECTOR • LED power indication • Watertight moulded construction 16A IP67 PLUG • Weatherproof marine construction • Easy assembly
STAINLESS STEEL INLET • Solid Cast Marine Grade 316 Stainless Steel • Includes an easy locking waterproof cap • IP56 rated
RSP16AKITSS
$399.00 + GST
16A kit with 316 Stainless Steel IP56 inlet, 10m 1.5mm² IP67 lead, & carry bag Note: The requirements for installation of electrical systems on craft of hull length up to 24m are specified in the ISO 13297 standard. MP16, MP32 and MP50 inlet will not accept standard CEE couplers.
TransNet NZ Ltd has made every reasonable effort to ensure the accuracy of this information and it is to the best of our knowledge correct and reliable. Under no circumstances does this constitute an assurance of any particular quality or performance and users should independently evaluate the suitability of products for their desired application. All information in this publication including pricing, drawings, illustrations, images and graphic designs are reflections of our current understanding. TransNet NZ Ltd reserves the right to make any adjustment to this information at any time. Our liability for the products outlined in this publication is set forth in our standard terms and conditions of trade. In case of any potential ambiguities or questions, please contact us for clarification.