Trust nVent Connection Technologies
Connecting and protecting critical infrastructure for over 100 years
nVent ERICO goes beyond Cadweld, offering a comprehensive range of bolted and compression grounding solutions, including fully IEEE 837 compliant options.
MEETING THE HIGHEST INDUSTRY STANDARDS — YOUR ONE-STOP SOLUTION FOR GROUNDING AND BONDING
Reducing Bushfires and Outages
Increasing Safety, Resilience and Reliability
NGCC (New Generation Covered Conductor) delivers underground like reliability at a fraction of the cost, materially reduces vegetation/animal fault risk, improves public and crew safety, and aligns with NZ standards and evolving vegetation regulations making it a pragmatic resilience investment for 11 & 22kV feeders across rural and urban New Zealand. Available in 3 standard sizes: 25 mm² ACSC (SWER, long rural spans), 62 mm² ACSR and 159 mm² AAAC.
RESILIENT
Stronger and safer during vegetation contact
PUBLIC & ANIMAL SAFETY
Low leakage currents reduce shock hazards
(typical leakage currents <1 mA)
RELIABLE
Reduces faults and outages from vegetation
(improves SAIDI / SAIFI)
FIRE RISK REDUCTION
Minimises bush and grass fire ignition risk
EASY RETROFIT
Installs easily into existing infrastructure
COMPLIANT BY DESIGN
Meets NZ standards and vegetation regulations
Passive Fire Protection Done Right!
FyreCAP
The FyreCAP is a fire-stopping cover for electrical junction boxes, fitting directly over existing boxes for fast installation, simple certification, and easy inspection.
Fire tested to AS1530.4:2014
NCC 2022 compliant
-/120/120 rated
Sealant-free, retrofittable install
Supports 1–4 conduit branches with removable tabs
Pyro-Safe Cable Wrap
Suitable for power and communication cables
Pre-formed fixing tabs for easy install
Pre-fitted intumescent for enhanced integrity and insulation
Pyro-Safe Cable Wraps protect grouped electrical cables from external fire and autoignition caused by overheating or short circuits. They fit complex cable layouts and allow for future changes—without requiring pre-cleaning.
No cable cleaning required
Fast, simple installation
Flexible for adds, moves, and changes
FM approved — Class 3971 (2019)
NEW! MV Fuse Pullers
Designed with multiple options to safely install and remove DDO and EDO fuse barrels, the Hedgehog MV Fuse Puller range provides secure, controlled handling during placement and retrieval from ground.
Compatible with both 100A and 200A DDO fuse barrels, the design incorporates Hedgehog bristles to deliver consistent holding force and improved control, while guiding features assist with accurate probe alignment for smooth fuse insertion and removal.
Building on an industry-proven design, the Hedgehog range offers enhanced grip, stability and visibility, making fuse handling easier and safer across a wide range of operating conditions.
Reflective tape for better night visibility
Bright orange colour makes them easy to see in all light conditions
Hedgehog bristles for greater control
Universal head for attachment to any hotstick
Replacement bristles available
Holds fuse securely for safer application
Made of Cast Metal – for a robust & long service life
TUDS Modular Pits –Rated for Heavy Loads
Made from rigid, high-strength SMC material, the Modular System offers a full range of pits tested to exceed AS3996:2019 requirements for both Class C and Class D applications, with lids specific to each class. Class C is ideal for residential roads and carparks, while Class D is a heavyduty option capable of supporting loads up to 8000kg.
Wide range of sizes: 450–1500mm wide, 300–1200mm deep
Custom depths with 100mm & 300mm risers
Reinforced sidewalls for added strength
Anti-tamper bolts for safety and security
Swappable ID pucks for flexible use
Lightweight, tool-free assembly
Up to 90% lighter than concrete
STANDARDS
Class C lids meet AS3996:2019 as standard (Class D also available)
P5 rated slip resistance to AS4596:2013
TransNet IANZ
Compliant. Comfortable. Ready to Work
Struggling to find harnesses for your team that comply? Look no further! The new YTECH-PRO-4D harness has been designed to meet the requirements of AS/NZS 1891.4 2025 while ensuring a comfortable and easy to don fit.
Manufactured in accordance with the recently released AS/NZS 1891.4 2025
Quick release buckles for easy donning and doffing
High strength lightweight aluminium metalware
Breathable Shoulder and Waist Padding
Dual side attachment points
o Large O-Ring for primary work positioning
o Fixed D-Ring for secondary work positioning
Shoulder, chest and leg adjustment points for increased comfort LARGE O-RING FOR PRIMARY WORK POSITIONING FIXED D-RING FOR SECONDARY WORK POSITIONING
SAFER DUAL ATTACHMENT POINTS
Waistbelt Tool Loops
Chest Buckles and Dorsal Fall Arrest
o Webbing Loop for use in High Voltage
Electrical Situations - No exposed metal above the waist
Optional Extra, varying colour Poles Straps for ease of Identification when disconnecting
Purpose-built accessories for composite crossarms
Crossarms are fundamentally the backbone in powerline construction. Historically made of hardwood, there is variation entering the industry by way of galvanised steel and composite options. With the limited supply of tropical and Australian hardwoods putting pressure on availability, it’s time to embrace these alternatives.
Composite crossarms require a specific set of accessories and we’ve got a full range in stock ready to fit. Made from galvanised steel, these accessories are built to last.
TNCCC GALVANISED CLEVIS
The Smarter Choice for NZ Utility Networks
Quick & Easy to install - Saves Time & Frustration for Installers
11kV to 33kV, up to 630A
Plain break Arcing Horns or Load Break Interrupter Heads
Fully Customisable to your Network specifications / build requirements, by the local team right here in NZ
High creepage Polymer or Porcelain insulators
Pole top or underslung, hotstick or ground operation
Manufactured and tested in accordance with IEC 30265-1, IEC 60694, IEC 62271, BS EN 60129 and ENATS 41-36
Spring assisted movement for swift and consistent operation
330mm open contact clearance as per EEA SM-EI Part 3, Section 7.703
ONE unit, TWO voltages, THREE functions! Teros™ can be a Switch, a Sectionaliser or a Recloser for 15kV and 27kV applications.
The superior choice for environmentally responsible networks, no SF6 gas.
SCADA, OMS or DMS via the SEL-651RA relay (or your preferred control relay) offers enhanced network reliability. Higher creepage modules and a sealed mechanism reduce potential for failure and maintenance.
High speed operation. Magnetic Actuator Internal CTs
In-built voltage sensing in both line & load sides
Simple serviceability & easy access via control enclosure
Safe Cuts. Every Time
Depth-limited cutting for safer duct work
DUCTSAFE PRO Depth Limiting Cutting Saw—safer, faster, more precise duct work. Fixed cutting depths prevent cable damage, ensuring controlled cuts that protect workers, cables, and customers. 8 standard depths available (custom sizes available).
