Trader 143 Fall 2017

trader-mag.com Fall 2017 TRADER MAGAZINE

1

2

3

CYLINDER BORING MILLS & BARS: Rottler #FA24EB, #F24B, #F2B, and #F4VB Air Floats Rottler #6DA4SB Portable Bar NEW Kwik-Way #FL & #FN Portable Bar Kwik-Way #FN-AC/048 Air Float Kwik-Way #FL, #FN, #FW, #FW-VW, & #FWS bars Kwik-Way #FL & #FN Overbore Kits Van Norman #888 Bar Only (No tools) VALVE GUIDE & SEAT EQUIPMENT: Serdi #100 & #60 Sunnen #VGS-20C Winona #PH-7000C Winona #PH-2000 & #PH-2000DA Peterson #TCM-25 Kwik-Way #019 HEAD & BLOCK MILL/SURFACERS/FIXTURES: Sunnen #HBS-1300 Surfacer w/CBN Rottler #SFOOE Surfacer w/mill head Kwik-Way #862 Surfacer w/CBN Van Norman #570A Rotary Broach Peterson #72 Dry Rock Surfacer LINE BORE EQUIPMENT: Berco #BC-4A w/2 bars & tooling(Late model) Berco #BC-4 w/2 bars & tooling Berco #BC-5 (rebuilt & good cond.)

Kwik-Way #LBM port. units (New & Used)

SUNNEN HONING EQUIPMENT & RELATED: #CV-616 & #CK-10 Cylinder Hones #CH-100 Line Hones & Mandrels #LBB-1810 Power-Stroked Rod Hones & Shop #LBB-1699, #LBB-1499 and #MBB-1660 Rod Hones & Shop #CRG-780, #CRG-750, & #CRG-500 Cap Grinders Tobin-Arp #CG-8400 Cap Grinder Large #CR Mandrels from 2.9” to 4.5” Large #Y104-5375 and #Y104-6562 Special Made Aluminum mandrels Large Line Hone Mandrels from 3.5” to 5.5” #CK-4000 honing head #HS-30 valve guide hone CYLINDER HONES & ACCESSORIES: Sunnen #CV-616 & #CK-10 Hones Winona #CH-1002 Manual Hone Sunnen #CK-4000 Hone Head CRANKSHAFT GRINDERS & RELATED: Berco #RTM-425A Grinder (144” cap) Berco #RTM-351A Grinder (in Ohio) Scledum #RG-350 & #RG-270 Grinders RMC #1200 Grinder (50” cap) Van Norman #438 (48”) & #465 (60”) Kwik-Way #259 Magnaflux (90”) Peterson #B-7500 Magnaflux

MISCELLANEOUS: Berco #RAC-1500 Camgrinder; Storm #75-HYD Camshaft Grinder; Storm #744 Camshop; ABS Camshaft Polisher; Ammco #6000 & #4000 Brake Lathes; Stewart/Warner #SW-2000 Balancer; DCM Flywheel Grinder; Polution Controls #DC-4A & #DC-III Ovens; AXE & Charley Cockey Head Pressure Testers; Nice Peterson #BK-17 oven; and other equipment too numerous to mention. OUR INVENTORY CHANGES WEEKLY! Check our website for most current listing.

EQUIPMENT NEEDED: Sunnen #CV-616 & #CH-100 Hones, Rottler & Sunnen Seat/Guide Machines; Berco, Winona, or Scledum head/block surfacers; Storm #85B Surfacers; Berco #AB651 rod bore; AXE head pressure testers; DCM, Van Norman, & Winona Flywheel Grinders; Storm Kotifin Crankshaft Polisher; Sunnen #VR7000 or 8000 Valve Refacers: Automotive size CBN Surfacers; Kwik-Way #855, #856, & #860 surfacers; Sunnen #CHW40 Work Stations; Sunnen #PLB-100 Line Bore; and any other equipment we can make money on. WE WILL PURCHASE 1 PIECE OR ENTIRE SHOPS

4

TRADER MAGAZINE Fall 2017 trader-mag.com

trader-mag.com Fall 2017 TRADER MAGAZINE

5

FALL 2017 Volmue 143

Advertisers Index Abs Products “IT’S IN THERE”

PRI Trade Show 7

Abro Balancing 28-29

Quality Cutter Grinding 15

Access Industries 5

Quincy Procell 58

Aera 26

Revco Precision 22

Air & Power Tools22

Rottler 82-84

American Gasket 41

RT Sales 23

Armex 80

Scholler Shop Equipment 32-33

Baker Equipment Sales 15,24,25,58

T & S Machine 16-20

Business Card Marketplace 22

Tierra Tech 31

Classifieds 52

Trader Magazine 52-53

Coder 57

Turner Technology 14

CWT Industries 2-3

Ultrasonic 73

Dakota Parts 24

Winona Van Norman 66-71

Delta Custom Tools 10 DNJ 11 Farris Equipment 4 Ferrea Valves 24 Inxpress 22 Irontite 47 Jackson Oven Supply 22 Jamison Equipment 13 Jack Scholler Shop Equipment 32-33 K & S Regrinding 24 Kwikway 47 Media Blast & Abrasive 44,46 Newen 1,9 Pioneer Steel 50-51

Trader Magazine is

MAILED

Directly to over

18,000 Shops and Buyers in the US and Over

40 Countries !

WORLD WIDE.

This index is provided as service. The publisher does not assume liability for ommisions or errors.

Reserve your space NOW for the PRI Issue! Call 714.671.0217 for specials!

7

Balancing Slugs, Pins, Plates & Bars

Our heavy metal arrives finished, ready to install, oversized by .003 for a precise press fit. We have the best quality, largest inventory and over 30 years experiences with heavy metal for crankshaft and chassis balancing.

Contact our sales team today!

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

• Hundreds of sizes in stock • Custom sizes available upon request • We can cut weld chamfers on any order

We’ve Made top quality ™ Affordable!

• www.facebook.com/nwntooling

Inquiries:

contact@newen.com +1-760-233-0067 www.newen.com

NWN FORM TOOLS, the very best money can buy!

• Each profile is ground one at a time • Each profile is checked for accuracy • 300+ profiles in stock • Same day shipping • No minimum • Custom profiles on request ...

Complete line of tooling also available, including tungsten carbide pilots, tool holders, tip holders, tool setting fixture, precision run out gauge, fixed-cutters, screws, screw-drivers, drive adapators, ball heads, precision t-level ...

ERT SUMMER 2017 P7.indd 1

trader-mag.com Fall 2017 TRADER MAGAZINE 5/25/17 11:01 9 AM

10

11

The Charger Production Pressure Blast Machine uses a large 1.0 cubic foot capacity ASME Coded pressure pot to pneumatically push the abrasive to the part using the nozzle ID size and blasting pressure to determine the compressed air usage.

Pressure Blasters require less cfm to create the same abrasive velocity during operation.

Direct pressure machines produce faster abrasive particle velocity, higher abrasive grain density and greater abrasive frictional heat for heavy coating removal and cross-drill de-burring.

• Three (3) large cabinet sizes all with 36 inch inside height • All three (3) cabinet sizes offer the Space Saving Side Mounted Dust Collector • Operator Platform Included • Direct Pressure can do something siphon can’t….. creates the fastest abrasives velocity….creates the highest frictional heat….blast into blind holes and pneumatically pushes abrasive through cross drill holes.

• Blast using light plastic abrasives or heavy steel shot, steel grits and all the other standard abrasives like glass beads, aluminum oxide, silicon carbide • LED Lighting • Boron Carbide Nozzle, • Large 24” ClearView Operator Window • Air Velocity Window Sweep for better visibility • Clean, Strip, Peen using all abrasive types • Also includes many more Standard Features not listed

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Shown with optional Turntable

JAMISON: your best source for

Automotive Shop Equipment DCM HMC3000 Head Machining Center

DCM / SCLEDUM RTY Head & Block Resurfacer CBN

Cylinder head milling & seat cutting in one

$26,995

$9,750

Serdi 100 Valve Guide & Seat Machine

Pro Ultrasonic Model 3624 Ultrasonic Cleaner

$22,500

$9995 Ampro 3448 Bake Blast System 48˝ capacity, lots of baskets

Magnaflux Zyglo ZA-28M

Delta Custom Tools

$2,995

$12,000 OBO

We are Authorized Dealers for the following lines of parts & equipment:

Look to AXE

PO Box 276 • 1908-11th Street, Emmetsburg, IA 50536 • Fax: 712-852-3570

800-841-5405

www.jamisonequipment.com trader-mag.com Fall 2017 TRADER MAGAZINE 13

14

Berco AB651VS Rod Boring Machine 

Insert Cutting Bits



Variable Spindle Speed



Variable Boring Feed Rate



Bore Both Big & Small End Of Rods



Optional Digital Center To Center Display



Correct Or Vary Center To Center Lengths



Corrects Twist & Bend To Eliminate End Lock

Bore Bushed Rods Or Bore Press-Fit Rods For Bushings

Failures Optional Digital Readout For Center To Center Length

w w w . j oe b ak e r eq u i p s a l es . c o m

trader-mag.com Fall 2017 TRADER MAGAZINE 15

16

T&S T&S Machines Machines and and Tools, Tools, Inc. Inc. Toll Free Free 800-766-2069 800-766-2069 •• Fax Fax940-668-8006 940-668-8006 www.tnsmachines.com www.tnsmachines.com •• e-mail: e-mail:info@tnsmachines.com info@tnsmachines.com

Get Your CNC Mill

Back Online!

There is an old adage that goes, “If it ain’t broke, don’t fix it!”

The opposite is true as well! Perhaps you have a CNC Mill in your shop and your operating system or your programming interface is dated, erratic or just not as user-friendly as you’d like it to be. We understand that your investment in CNC equipment probably pushed the limits of your budget at the time of purchase, which means if that same machine is not operational or unpredictable now it’s costing you money to sit there. We face the same issues you do from a manufacturer point of view, machines age and require maintenance and when they do you have to call for help.

• • • •

Use existing block fixture or install 10” riser and rotary Integrated probing system Enjoy all the functions of our TS-1000!

Use existing boring heads or upgrade to full industrial tooling available from any industrial tool supplier • Make torque plates, carb flanges or any other part, one-off or production parts!

• Use existing line bore or add The T&S Helical System • Best value in the industry with more features!

Call today and let us help you get your milling machine back online and producing profits for your company!

T&S Technical is a phone call away!

F65 packages available!

Made in U.S.A.

We listen and we respond with solutions!

Upgrade your spindle motor for faster cutting speeds!

17

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Introducing the Latest Innovation in Balancing Software!

When T & S Machines and Tools, Inc acquired the Stewart Warner/Probal project and determined to take balancing to the next level we held an automotive crankshaft in the air and built a balancer around it. The compact design fits in the smallest workspace of any machine in it’s class and accommodates any automotive and light industrial shaft. We designed the machine to have the maximum clearance for the workpiece and to be rigid while drilling on tough aftermarket crankshafts.

In 2014 T & S stepped up with totally redesigned electronics from the sensors all the way to the computer. We now have, exclusive to T & S, the most revolutionary balancing software in the industry. Just look at the new features available now!

• T&S produces our own electronics in-house, we build our own encoders, sensors, and DAQ boards • Solid-filled base • Smallest footprint in the industry!

• Built-in heavy metal stand on our Deluxe Probal 500 • Balance in 5 identifiable planes!

• T&S takes in simultaneous signals from the most advanced chip design anywhere!

• T&S/Probal/Stewart Warner dates back to the 1950’s, that’s 70 years of balancing experience!

• T&S has the best customer service and best support in the industry – Ask a T&S user!

• T&S challenges any competitor to balance more sensitively or accurately or quickly!

• T&S is the best value in the industry!

Made in U.S.A.

18

T&SMachines Machinesand andTools, Tools,Inc. Inc. T&S TollFree Free800-766-2069 800-766-2069• •Fax Fax940-668-8006 940-668-8006 Toll www.tnsmachines.com • e-mail: info@tnsmachines.com www.tnsmachines.com • e-mail: info@tnsmachines.com

Simple Solutions to Complex Concerns!

PROBAL 500 Deluxe Balancer

Introducing the PROBAL 500 Deluxe Balancer. The new Heavy Metal Drilling Cabinet is built onto the machine so that you no longer have to utilize a separate mill when drilling to add weight.

Our rigid drill press assembly is extended to accommodate drilling over the cabinet, making the process easy.

This machine package will include tooling for heavy metal work on top of our normal automotive tooling. At a price of $20,000, we have maintained the value that you can’t find anywhere else.

Turbo 500 Turbocharger Balancing Attachment Turbochargers can now be balanced on an existing balancer without the need for a separate balancing machine. Designed for the automotive performance shop, the Turbo 500 is mounted on your current balancer with its own drive system and unbalance sensors using the T&S balancing software and interface.

There is no faster system to balance turbocharger rotors.

Versatility with Value

There are many add-ons available. Here is a list of just a few of the upgrade options: • Torque Converter Attachment ***NEW*** • Flywheel Mandrel Set • Expansion Mandrel Set

• Spade Drill Kit • Extended Height Columns • Adjustable Height Column

• Driveline Packages • Vertical Balancer for Flywheels/Discs/Drums • And many more!

19

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Save Your Older Balancer from the Scrapyard!

Dana and Tony from Epoch Industries

Archie Frangoudis - Archie’s Racing Service

“I can’t get my balancer processor to come on, do you have a replacement?”

“My left pickup on my balancer won’t read anything, do you have spare parts for this machine?”

“My balancer reads one correction and then on the next spin it reads 300 grams different, what do I do?”

We hear these desperate questions almost every day in our office at T & S Machines and Tools, Inc. Shop owners have built a business that includes crankshaft balancing or they balance industry-specific parts all day long, every day and then suddenly their 35-year-old balancer goes down. We understand the dilemma and we understand the urgency. Time down is money lost.

T & S now offers the PC-5 Electronic Upgrade to meet the cry of those phone calls we get every day. We have been working for the past 5 years on an upgrade system that has been fine-tuned and tested and now includes the same exclusive balancing software sold on our brand new PROBAL 500 Balance System. The PC-5 Electronic Upgrade will update almost any older soft and hard bearing balancers, both automotive and industrial machines.

With the Sensor Mapping feature we can run any machine at any speed within our mapped range. The software is maintained in-house so we can include unique balancing correction analysis for any industrial balance job as well.

20

Automotive Production Dominator Siphon This 100% welded 12 and 14-gauge steel Production Siphon Blaster includes the patented bolt-on internal abrasive separator reclaimer and a long list of included standard features for use with any abrasive 0-150 mesh and gun sizes 25 to 90 cfm.

Three standard cabinet models 3636, 4836 and 4848 all with 36” cabinet heights and side mounted dust collectors for space saving footprint.

• 13”X 24” Large view window • LED Lighting • 10” work ports • Fast Cleaning Siphon Delivery for easy operation and low maintenance • Gun Sizes to 90 cfm for highest frictional heat and fastest cleaning • Quickly remove rust….paint…. carbon….heat discoloration and more using high frictional heat to decrease cleaning time • Space Saving Side Mounted Dust Collector with 700 cfm blower • 220 sq’ Merv Tested Cartage Filter • Many Part Handling Options Available • Optional HEPA After Filtration for Cell Machine Operations available • Pneumatic Dust Collector Cleaning • More Included Standard Features than any other manufacture of abrasive blasting cabinets in today’s market

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 21

BUSINESS CARD MARKETPLACE

New 14mm to 26mm seat chuck for turning the OD valves in motorcycles and cars. $195.00 for any size. Call 714-671-0728

Flat Plate Heavy Metal Chassis Weights2-5/8˝W x 5-3/8˝L x either .140 & .240 thicknesses; Stackable to bolt on for balancing chassis on Indy cars, stock cars, NASCAR, dragster ballasts. .140 = 480 grams; .240 = 980 grams

Round Bar Stock2˝D x 2˝L & 2˝D x 3˝L for making your own slugs or chassis balancing.

Round Bar Stock15˝L x 1-1/8˝D, 1-1/2˝D or 1-3/8˝D cut your own crankshaft slugs. Call 714-671-0728

Subscribe For a free copy of Trader Magazine email your name and mailing address to Submit@Trader-Mag.com or call 714 671-0217

22

To receive our Digital/Online version with Clickable Links email us at Submit@Trader-Mag.com

trader-mag.com Fall 2017 TRADER MAGAZINE 23

24 TRADER MAGAZINE Fall 2017 trader-mag.com

ABS CRANK POLISHERS - 3 SIZES This one is going to Midstream Operations in Colorado. How about yours?

FEATURES:

• Polishes crankshafts up to 55˝ • 2-1/8˝ belt • Aircraft aluminum drive wheel & idlers • Steady rest for doing heavier diesel cranks • 5˝ Chucks • Available to handle up to 32˝, 42˝ & 55˝ center to center See our video at: youtube.com/absproducts

591 W. Apollo Street • Brea, CA 92821 ph (714) 671-0728 fax (714) 671-0836 email: sales@abs-products.com www.abs-products.com

Now Pressure Testing Is Not Just A Service For Your Customer It Also Makes Good Profit For Your Shop!

Precision surfacing that you can rely on to last many generations. Berco has 90 Never miss aof leak in an aluminum head, block plus years manufacturing quality or up to a 53” long diesel head. machines that last a lifetime!

Quick setup and immersion in heated water Join the thousands of shops that have opens up all leaks for a positive test.

experienced the quality of Berco, but nowrotation at an affordable price.

360º of heavy parts lets you see the exact position of leaks.

trader-mag.com Fall 2017 TRADER MAGAZINE 25

26

THE FINISH LINE ABS carries over 100 different styles and sizes of belts to meet all of your finishing needs!

Soft Back•Diamond•Micro Finish•Hard Back•Cork•Scotch Bright

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts trader-mag.com Fall 2017 TRADER MAGAZINE 27

28

29

PowerPeen Direct Pressure Blast Cabinet Optional Mobile Work Cart shown with Polyethylene Turntable, Outside Tracks and Door Modification Optional Rubber Cabinet Liners, Operator Platform with Double Steps.

The ABS Products PowerPeen Direct Pressure Blast Cabinet comes in many different cabinets sizes including 60x60x48H model, choose the one right for your application. If you need a Direct Pressure for Plastic, Glass Beads, Aluminum Oxide, Steel Shot/Grit or any abrasive type between 20 to 120 mesh the Power Peen is the right machine for the job saving dollars on the purchase. It includes a long list of standard features and access to a longer list, almost eighty, of optional features to make blasting the part and machine maintenance easy and simple. Patented Separator Reclaimer sends the spent abrasive and dust into the 220 sq.ft. cartridge dust collector complete with hopper dust storage and pneumatic vibrator cleaning cycle. Advanced LED lighting, window sweep, ASME Coded 1.0 cubic foot pressure pot, MERV tested filter cartridge, operator platform and heavy duty bar work grates and more are all included. Add an optional Mobile Work Cart making quick work of loading hard to handle large parts. Call for added information on the machine and options. 714-671-0728

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Power Peen Direct Pressure Included Standard Features • 13” x 24” window with protector • Window sweep • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • LED advanced lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning vibrator • HD bar work grates • MERV tested cartridge, 220 sq.ft.

• Dust storage hopper, 1-1/2 c.f.

• 1.0 c.f. pot capacity • Operator platform included

www.tierratech.com Tremendous water savings

Faster cleaning

TierraTech U.S.A. Draper Business Park 12227 South Business Park Drive, suite 100. Draper, UT Office 801 302 2015 / Cell. 801 244 7126 sales@tierratech.com / www.tierratech.com

Biodegradable detergents

Quietest equipments of the marketplace

trader-mag.com Fall 2017 TRADER MAGAZINE 31

JACK SCHOLLER EQUIPMENT • 157 Wedgeway Drive • Statesville, NC 28677

e-mail: jackscholler@earthlink.net jackschollerequipment@roadrunner.com Office: 704-924-6803 Jack: 704-906-7980 Sterling: 717-377-1587 Scott: 404-488-4378

USED EQUIPMENT

CRANKSHAFT GRINDERS Berco RTM 300 Crankshaft Grinder - 94”, Arnold Gauge, Dresser, 2 Steady Rest.................................................... $15,000.00 4 Wheels & Hubs (Used as Roller Grinder) Scledum 230 Crankshaft Grinder - Reconditioned, Standard Tooling........................................................................ $15,500.00 Storm Vulcan 15C Crankshaft Grinder with Chucks, Standard Equipment, including............................................... $12,500.00 4-Wheels & Hubs

GUIDE & SEAT MACHINES Peterson TCM25V Guide & Seat Machine, Belt Drive,Air Lock Table........................................................................... $7,500.00 Peterson TCM25 Guide & Seat Machine with 360 Degree Fixture............................................................................... $5,500.00 Peterson TCM25 Guide & Seat Machine with 180 Degree Fixture.............................................................................. $4,500.00 DCM HMC2000 Guide & Seat Machine.......................................................................................................................... $6,500.00 Peterson TCM25 Guide & Seat Machine - Air Lock Table, Gearhead........................................................................... $6,500.00 Variable Speed, Standard Tooling Tobin Arp VGS 2000 Guide & Seat Machine with Standard Tooling............................................................................. $4,500.00

PRESSURE TESTERS Master Tool lPT48A Pressure Tester with Power Rollover............................................................................................ $4,500.00 Delta Pressure Tester, 15” Width, Standard Tooling...................................................................................................... $4,500.00 Master Tool Pressure Tester - 38”.................................................................................................................................. $3,500.00 Peterson PT38 Pressure Tester...................................................................................................................................... $3,500.00 Master Tool Head Oven................................................................................................................................................... $1,000.00

VALVE GRINDERS Sunnen VR6500K Valve Grinder...................................................................................................................................... $3,500.00 Kwik-Way SVS Valve Grinder.......................................................................................................................................... $2,500.00 Sioux 2075 Valve Grinder................................................................................................................................................ $2,500.00

SURFACE MACHINES RMC 12 Surfacer with CBN, Standard Tooling............................................................................................................ $14,500.00 Master Tool Belt Surfacer - 14”...................................................................................................................................... $2,500.00 Master Tool BS14 Belt Sander, 14” Belt......................................................................................................................... $2,000.00 Winona Van Norman SE1229 Belt Sander, 12” Belt, 220V, 1 PH, 3 HP......................................................................... $2,000.00 Kansas Instruments RG1203 Belt Sander...................................................................................................................... $2,500.00 RMC 1436 Belt Sander 14”............................................................................................................................................. $2,500.00 Berco STC461 Surface Grinder, Standard Tooling....................................................................................................... $27,500.00 Add: CBN Hub for..................................................................................................................................................... $2,000.00 Comec 1000 Auto - CBN Surfacer................................................................................................................................ $12,500.00

ROD HONES, ROD BORING, CAP GRINDERS, ROD HEATERS Sunnen 1699 Rod Hone.................................................................................................................................................. $2,500.00 Peterson CG87 Cap Grinder........................................................................................................................................... $1,800.00 Sunnen CRG750 Cap Grinder......................................................................................................................................... $1,250.00 Sunnen 1299 Rod Hone..................................................................................................................................................... $950.00 RMC-70 Cap Grinder with Heavy Duty Factory Table................................................................................................... $2,500.00

CYLINDER HONE - LINE HONE RMC LM150 Cylinder Hone, In Line Vertical Hone, Standard Tooling........................................................................ $10,500.00 RMC 100 MH Manual Hone - Standard Tooling............................................................................................................. $1,500.00 Sunnen Line Hone Mandral - 15RY4500........................................................................................................................ $2,000.00

www.jackschollerequipment.com 32 TRADER MAGAZINE Fall 2017 trader-mag.com

JACK SCHOLLER EQUIPMENT • 157 Wedgeway Drive • Statesville, NC 28677

e-mail: jackscholler@earthlink.net jackschollerequipment@roadrunner.com Office: 704-924-6803 Jack: 704-906-7980 Sterling: 717-377-1587 Scott: 404-488-4378 Last updated 8/23/17

FLYWHEEL GRINDERS Peterson FG24 Flywheel Grinder.................................................................................................................................... $4,500.00 Winona FG5000 Flywheel Grinder.................................................................................................................................. $4,000.00 Kansas Instruments FG596 Flywheel Grinder................................................................................................................ $3,250.00 IDL Flywheel Grinder, Standard Tooling......................................................................................................................... $4,000.00

BORING BARS RMC-100 Boring Table, Air Float, Block Length 32” Max. Bore Diameter -5”............................................................. $3,500.00 Berco ACP151A Cylinder Boring Machine, 90 Degree Block Fixture........................................................................... $8,500.00 60 Degree Block Fixture, Tool Sharpener, Standard Tooling Berco ACP151A/M Cylinder Boring Machine, 45 & 30 Degree Fixtures....................................................................... $8,500.00 Tool Sharpener, Standard Tooling Kwik-Way FN Boring Bar with Boring Stand.................................................................................................................. $5,500.00 Kwik-Way FN Boring Bar with Boring Stand.................................................................................................................. $4,500.00

LINE BORING Scledum Line Boring Machine, 32 MM Bar.................................................................................................................... $7,500.00

CLEANING EQUIPMENT Peterson BK17 Oven....................................................................................................................................................... $3,500.00 Trinco Glass Bead Machine & Filter............................................................................................................................... $1,250.00 RMC OLC3648 Spray Cabinet, Gas................................................................................................................................ $5,500.00 RMC Rinse Booth with Turntable................................................................................................................................... $1,250.00 Axe Rinse Booth - 1 Year Old - With Turntable.............................................................................................................. $1,250.00 Empire Glass Bead Cabinet - 48 x 48............................................................................................................................. $1,800.00 George Olcott Glass Bead Cabinet................................................................................................................................ $1,250.00 RMC SW2HT Spray Cabinet with Soak Tank................................................................................................................. $2,750.00 GPC 30 Tumbler................................................................................................................................................................. $750.00 RMC Aluminum Head Oven............................................................................................................................................ $1,250.00

MISCELLANEOUS Ammco 4000, 4100, 3000, 7000 Drum & Disc Lathes.............................................................................................. Call for Price 6 - Air Compressors.................................................................................................................................................. Call for Price New Dowell Pin Puller Set.................................................................................................................................................. $175.00 New Piston Pin R & R Set.................................................................................................................................................. $175.00 New Sioux Tapered Pilots.................................................................................................................................................... $37.50 Diamond Flywheel Stones................................................................................................................................................. $175.00 New - Portable Crankshaft Polisher.................................................................................................................................. $675.00 Sioux Seat Grinding Stones - 1-1/8” through 1-1/2”............................................................................................................ $8.95 Sioux Seat Grinding Stones - 1-9/16” through 1-15/16”...................................................................................................... $9.50 Sioux Seat Grinding Stones 2” through 2-1/2”................................................................................................................... $10.50 Sioux Seat Grinding Stones 2-3/4” through 3-1/4”............................................................................................................ $17.50 Kwik-Way Seat Grinding Stones - (Same Sizes and Prices as Sioux) Sunnen Rod Hone Mandrals - CR, PL, KL, LJ, 4UL Series..................................................................................... Call for Price 5 - 4-Wheel Engine Stands.......................................................................................................................................... $100.00 EA

www.jackschollerequipment.com trader-mag.com Fall 2017 TRADER MAGAZINE 33

NEW! Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing.

Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments.

Works great will all degree wheels through 16” or larger depending on the mounting hole.

3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ----------- $495

18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings.

Part #ST-DegreeWheel-18 -------------------- $225.00 Pointer ------------------------------------------$60.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

34 TRADER MAGAZINE Fall 2017 trader-mag.com

ABS 20 Ton Power Hydraulic Floor Shop Press • Load capacity: 20 ton • Overall height: 61.5" • Table height is adjustable in 5" increments • Working Height 1” to 44.5” • Slide in Press Plate Included • Various accessories are included for a variety of projects • Convenient foot operated air/hydraulic motor • Sliding head allows for offset pressing • Heavy-duty H-frame constructed of highgrade steel

Special ABS Accessories Included

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 35

$750.00 HT-6300

Hollow Rams $550.00 HT-6000

Press Ram $200.00 HT-4000 Hollow rams with bolts are used for dampener installation, rocker arm pulling.

1.625” Travel

1.625” Travel

3.000” Travel

$250.00 ea.

2.250 14 pitch

2.750 16 pitch

Puller Plates HT-275016

HT-125014

1/2”

5/16” & 3/8” T-wrenches for rocker arm pulling; LS7 16mm, 1-1/2 pitch threads; Big Block 16mm, 200 pitch thread; Chinese Eagle Crank 5/8” Coarse thread; Ford 3/4”

7/16” Dampener Wrenches for installation $79

ST-LS7 $250.00

Rocker Arm T-Wrench - 4340 chrome moly heat-treated steel w/ rolled threads $200.00 ea.

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

36 TRADER MAGAZINE Fall 2017 trader-mag.com

HT 4000 Dampener Puller Kit: 1 ea. HT 4000 RAM .................$200.00 1 ea. HT-125014 Puller Plate ....$250.00 3 ea. 7/8” Plungers .................$150.00 1 ea. Bolt Kit .........................$200.00 Total .....................................$800.00 Pump & Hose .........................$350.00 Complete ........................... $1,150.00

HT 6000 LS7 Dampener Puller Kit: 1 ea. HT-6000 RAM ............... $550.00 1 ea. HT-275916 Puller Plate ... $250.00 3 ea. 3/4” Plungers ............... $150.00 1 ea. Bolt Kit ........................ $200.00 ST-LS7 ................................. $200.00 Total ................................. $1,350.00 Pump & Hose ........................ $350.00 Complete .......................... $1,700.00

Heat treated 4340 chrome only preheat treated. T-wrenches are $200.00, available in either 5/16” or 3/8”.

Hydraulic Stud Puller Kit:

For 1/4” hose quick disconnect!

HT-6000 RAM ............$550.00 3/8” T-Wrench ...........$200.00 5/16” T-Wrench .........$200.00 Total........................$950.00 Pump & Hose ............$350.00 Complete .............. $1,300.00

For 3/8” hydraulic hose quick disconnect! ph 714-671-0728 fax 714-671-0836 abs-products.com sales@abs-products.com youtube.com/absproducts

Custom Tools for Performance & Rebuilder Shops trader-mag.com Fall 2017 TRADER MAGAZINE 37

$7,900

.00 Pollution Control Workstations PC-4736-E

enclosed top that swings up out of the way for loading, swings down to keep particle out of shop, single motor on the back, 3/4 HP @ 750 cfm. Move up to 2 HP motor and get 1250 cfm.

Upgrade from ABS-4228, this is the latest pollution control workstation from ABS Products.

This machine is a must in today’s market where you are working with that you have to keep out of your lungs.

See More Pollution Control Workstations and many other products: www.youtube.com/absproducts 38 TRADER MAGAZINE Fall 2017 trader-mag.com

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com

Downdraft Tables with Turntables We are delivering 3 new Downdraft Tables with Turntables are going to LKQ/Amada of Texas for blowing off blocks and deburring parts.

Downdraft 36’ turntable, 2 HP, 2,000 CFM for blowing off parts, 440 square feet of fire retardant air filters, non-scratch plexiglass, new-style metal frame.

714-671-0728

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com Fall 2017 TRADER MAGAZINE 39

Multi-Abrasive 2-station Blasting Cabinets for Production Engine Rebuilders!

We built this super-flexible two-station blasting system for Gary Kehrer at Platinum Performance Group in Sunnyvale, TX. Gary works on aircraft engines such as the Lycoming prop engine cases pictured above.

There is also a photo of the welded steel tubing that works as an engine mount to hold those engines in. They are stripped down to remove paint and magnafluxed, Gary’s shop does it all.

He also works on Continental flat 6’s, race boats, aluminum magnesium heads from different manufacturers.

Shot peening, plastic media, glass bead, all runs through this versatile production quality machine.

If you run a large production shop like Gary’s we have the custom blasting machines you need.

This makes an EXCELLENT shop peening cabinet for diesel cranks or anything!!!

714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

Tools for Performance Racing Engine Builders 40 TRADER MAGAZINE Fall 2017 trader-mag.com

Excellent maching for shot peening cranks!

In fact that’s what we designed it for!

The welded steel tubing that works as an engine mount Lycoming prop engine.

Lycoming prop engine cases on turntable and dolly system, entering the blaster.

Domestic, Japanese and European Nozzles for shot peening, blasting and plastic media!

• A2 tool steel • Heat treated to 80 Rockwell • 6” x 1/2” OD 90 degree nozzle • 5” x 1/2” OD straight nozzle • 3” x 1/2” OD straight nozzle • 4-1/2” x 3/8” OD 90 degree nozzle • 3” x 3/8” OD straight nozzle

Each nozzle: $250.00 Full set: $1250.00

www.americangasket.biz trader-mag.com Fall 2017 TRADER MAGAZINE 41

THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized & your stock safely stored!

CH-1 Crank Rack

CH-1 Crank Rack with optional top, V-blocks and one cam hanger.

CH-2 Double Crank Rack

CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level.

Each level holds between 20-24 cranks depending upon the model.

ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)................................... $149.00

Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory.

This is a rack for every crank.

SAVE MONEY AND FLOOR SPACE!

2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack

591 West Apollo Street • Brea, CA 92821 phone 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts 42 TRADER MAGAZINE Fall 2017 trader-mag.com

System on Best Storage the market!

Can Be Arbors perately!

Se Bought

Mill Mounted Drilling Platform

ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks.

Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect) - $149.00 Call 714-671-0728 • ABS-Products.com

ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments

Drilling Platforms for Hines & Winona Balancers

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert.

Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.)

CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack.

CR-ES-3 ............................................................................. $95.00 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.

Tools, Equipment, Machines for Engine Builders & Rebuilders trader-mag.com Fall 2017 TRADER MAGAZINE 43

3030 PowerPeen Industrial Direct Pressure Each abrasive delivery method (siphon and direct pressure) has its own “best applications” just like engines open to atmosphere and engines using boost to overcome one atmosphere. Each model also has its best application for the cabinet size; one size does not fit all! The PowerPeen 3030 is the smallest cabinet size in a seven cabinet lineup. The 3030 is a compact size with all the features included making it an Industrial Direct Pressure Cabinet in a smaller package.

Use for shot peening quick replacement parts or use for glass bead, plastic and all the other media types.

Standard Features • 13” x 24” window with protector • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • Advanced LED lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning • Bar work grates • MERV tested cartridge, 220 sq.ft.

• Dust storage hopper, 1-1/2 c.f.

• 1.0 c.f. pot capacity, Charger model • Operator platform Included

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 44 TRADER MAGAZINE Fall 2017 trader-mag.com

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com Fall 2017 TRADER MAGAZINE 45

The Hurricane Wet Blast Machine, For A Finer Finish Media Blast manufactures more than 170 standard models and sizes of blasting cabinets with over 80 optional features for increased productivity, durability, and operator safety. Our extensive line of Wet, Dry, Siphon and Direct Pressure blast cabinet models includes specialty machines for automotive, aerospace, military, precision focused micro blasting, plastic stripping, soda blasting, tumble part processing and shot peening. Cartridge dust collectors, HEPA after filters and separate standing timed reverse pulse cleaning dust collectors are included as standard sandblasting equipment or available option upgrades. The Hurricane Wet Blaster has many applications in the automotive field to include 3-D printing, processing wheels, chemically clean part surface, zero abrasive embedment and the elimination of frictional heat capable of damage and part distortion.

Standard Features • Stainless Steel Cabinet • Seal-less Slurry Pump • 25 to 28 % Abrasive Suspension for faster processing • Negative Pressure Cabinet with Mist Collector Blower and Filter • LED Cabinet Lighting • Positive Locking Window Seal

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 46 TRADER MAGAZINE Fall 2017 trader-mag.com

trader-mag.com Fall 2017 TRADER MAGAZINE 47

ALL NEW, Pro G/S The Pro G/S is a more compact cabinet using smaller amounts of compressed air designed for shops with limited floor space and smaller part volumes. The Pro G/S was designed specifically for use with Grit and Shotor combinations of the two. Applications Finishes and Camouflage Repairs. The included casters allow the machine to be rolled into position,used, and then moved to a stored location.

Attached Dust Collector

FEATURES & BENEFITS • Duplicates Original Factory Finishes • Camouflage Surface Repairs • Reaches Down Into Deep Cylinder Ports • Compact Footprint with Casters • Negative Pressure 100% Welded Dust Collector • 90 sq. ft cartridge filtration • Semi-Automatic Dust Collector Vibrator Cleaning Cycle • Advanced LED Lighting • ASME Coded Pressure Pot with Access Port • LG. 13X24” view window

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Update your Piston Ring Grinder to an ABS Ring Grinder!

START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs.

We have what you need for any type of ring!

Complete with Micron Disk Micron Disk, 1 - 4” Turntable - $1,455.00 Micron Disk, 1 - 5” Turntable - $1,555.00 Micron Disk, 1 - 6” Turntable - $1,655.00 Diamond or Borzon Disk - $325.00

---- $10.50 ea.

--$14.75 ea.

New Stick-On Disks RG-5956 ---------------- 10 for $50.00 12 pack of Micron Disks --------------------------------- $19.25 50 pack of Micron Disks ------------------------------- $65.00

ABS Products • 714-671-0728 ABS-Products.com • youtube.com/absproducts trader-mag.com Fall 2017 TRADER MAGAZINE 49

GARAGE AND SHOP ORGANIZERS The Pioneer Steel line of high quality garage and shop organizers meet the high standards you demand for your shop or garage. These new products are a great way to store and organize those loose items and will give your garage, shop or enclosed trailer a cleaner look. Pioneer Steel now has exactly what you need at an affordable price. Over 30 sizes and styles to choose from; made of high quality steel and available in white, red or black durable powder-coat finish. MOUNTING HARDWARE INCLUDED!

2 ROW AEROSOL CAN HOLDER Capacty: 8 cans

2000W 2000R 2000B

SMALL OIL BOTTLE SHELF Capacty: (6) 1 QUART BOTTLES

2010W 2010R 2010B

SMALL AEROSOL CAN RACK Capacty: 6 cans

2002W 2002R 2002B

LARGE OIL BOTTLE SHELF Capacty: (12) 1 QUART BOTTLES

2014W 2014R 2014B

LARGE AEROSOL CAN RACK Capacty: 12 cans

2006W 2006R 2006B

COMBINATION STORAGE SHELVES

2016W 2016R 2016B

PHONE: (714)255-0526 • FAX: (714) 257-0184 50

LARGE OIL BOTTLE HOLDER Capacty: (8) 1 QUART BOTTLES

2008W 2008R 2008B

LOCKABLE ORGANIZER WITH STORAGE SHELF

2022W 2022R 2022B

TOOL BOX

R103

TOOL BOX

HR19

TOOL BOX

R1182-02 R1182-03

PIONEER STEEL CO.

sales@pioneersteelusa.com

trader-mag.com Fall 2017 TRADER MAGAZINE 51

CLASSIFIEDS Boring bar- Kwik-Way FL w/ adjustable stand fully tooled with original tool box & manual 120v. $3500 Cylinder hone- Serv-Equip. wet hone with friction feed head, uses AN stones includes long Sunnen dial bore gauge a nice selection of new and used stones 120v. $4000 Rod hone- Sunnen 1810 auto stroker with gauge fully tooled very nice machine from 1 man shop! $3500

Full Time Position for a Crankshaft Grinder Operator All custom work Must have 3 year’s experience on a crankshaft grinder. Must have experience on rough grinding and finish grinding crank shafts Must speak English Compensation: DOE

EDM- UNI-TEK 300SG $2000 Vac test bench- 18˝ x 36˝ $500 Steel Shot abrader- $1000 Dial bore gauge- Sunnen (long .001) in nice condition, calibrated and in original case $500 Setting fixture- for Dial bore gauge (sunnen) nice condition in the original box. $500 each Spring tester- Rimac 250lb $150 Tumbler- Sioux small parts tumbler $1000 Parts tumbler older ugly unknown brand but works well $500 60 ton Manley hydraulic-press. 6’ wide! very large press with large arbor press on 1 end $2000 10 HP compressor- Ingersoll Rand $1500 Sioux 2075 valve grinder with base cabinet $750 Valve grinder- Sioux 645 $350 Am-pro PT-100 pressure tester with lots of plates, little rusty but works good $500 2 Kansas Instruments jet wash cabinets with roll out basket both work great 3ph. $1500 each 2 small hot tanks aprox. 40 gallon both work good 120v. $500 each Nick Redenbaugh Modesto, CA 209-595-0767 nick@209toyota1.com

Face Mill Grinding: Storm Volcan Cutter Plates Re-Sharpened Cam generated face radius for smoother finish.

Gene Ohly 626-280-0633 / 626-623-0940 email: aeo3219@yahoo.com Ammco Rotor Machine $800.00 408-842-5950 email: paulrrossi@gmail.com

We manufacture, repair and modify high performance racing crankshafts. Fast pace growing company.

Duties: Must be able to operate a “Crankshaft” Grinder Must have knowledge of crankshafts Must be able to work with minimal supervision Meet production schedules Must be detailed and organized Must be able to lift 75lbs.

We offer Benefits: Benefits include, vacation, sick, health and dental This is a very challenging and rewarding job for the right person. We offer a clean, safe and pleasant working environment Please call Marine Crankshaft at 714-549-2388 Regards, David Eden Marine Crankshaft Inc. (P) 714-549-2388(F) 714-549-1382 Email- cacranks@yahoo.com 2155 So. Grand Ave Santa Ana, CA 92705

“New” 8˝ Self-Centering Lathe Chuck • 8-Inch 3-Jaw Scroll • 2.55-Inch Bore • Plain back • 2 sets of jaws • Wrench and mounting screws included $199.00

ABS Products 714 671-0728 Custom 10’ Crank Polisher “Brand New” Extra-large, production crank polisher for those big diesel cranks.

Designed and built to handle the extra weight and length of large heavy cranks, 10’ 7” between centers. Uses 5-7/8” x 77” belts.

Contact us for additional details and price.

ABS Products 714 671-0728 52 TRADER MAGAZINE Fall 2017 trader-mag.com

trader-mag.com Fall 2017 TRADER MAGAZINE 53

54 TRADER MAGAZINE Fall 2017 trader-mag.com

• • • •

60” x 60” Steel shot blaster with very fine .007 shot 10 ft. track and dolly with a 48” turntable Double doors For SRC/Kamatsu Diesel, an ABS Products customer for over 20 years; Mike Ryan - Energy Dynamics; Rex Crumpton - Memorial Machine

CALL THE FACTORY DIRECT!!!

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

Chanel

55

N-200 Stage II Soda Blaster Using GhostFlow™ Technology

STANDARD MACHINE FEATURES • Three (3) Cabinet Sizes • 36x36, 48x36 & 48x48 (w x d) • 13” x 24” ClearView™ Window • Easy Clean MERV Tested Cartridge Filter • Pneumatic Vibrator Dust Collector Cleaning Cycle • Reverse Pulse Dust Collector Cleaning Cycle • 700 CFM Blower w/ Silencer • Easy to use Soda Pressure Generator with Control Panel • ASME Code 0.8 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 9 to 22 CFM Soda Nozzle • Large Side Access Door • Pneumatic Soda Feed System

The N-200 Stage II Soda Blasting Cabinet is one of the most popular of the NEW Soda Models using larger cabinets and larger dust collector sizes.

This allows the user to operate longer hours and access other part handling options important to soda blasting applications.

This is a great choice for cleaning many automotive parts like automotive heads when you want the original finish and a soluble abrasive to eliminate any abrasive residuals.

The Patented Separator Reclaimer prevents 95% of the used soda from transferring into the dust collector. This unique design allows longer daily machine operation and more daily part production.

Downdraft Cabinet Airflow using GhostFlow™ Soda Delivery Technology and Used Soda Dropout are what make ABS Products the leaders in soda cabinet technology.

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head!

1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 5. Easy 714-671-0728 6. Profitable abs-products.com

VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00

VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 VT-2500-4500-F 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting ............$21.80 VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting ......................$21.80 VT-3000-4000 3”x 3” pad without fitting ......................$21.80 VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 VT-3000-4000 3”x 4” pad without fitting ......................$22.80 VT-6000-6000 6”x 6” pad without fitting ......................$24.95 VT-3-TP 11”x 35” table pad for VT-3 ...................$62.95 VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 VT-SP-14 14 mm spark plug adapter ....................$39.00 VT-SP-18 18 mm spark plug adapter ....................$49.00 VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 GA-LG Liquid filled gauge .................................$80.00 VT-3-H 1/4” vacuum hose ..................................$39.00 VT-RV Release valve ..........................................$42.00 VT-TA Table adapter .........................................$10.00 VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 VT-3-P 3 CFM pump .........................................................$328.98 VT-5-P 5 CFM pump ........................................$475.00 trader-mag.com Fall 2017 TRADER MAGAZINE 57

FOR SALE Superflow 902 Pro Engine Dyno 2500 HP complete w/pumps & tank $ 28,500.00 Superflow 600 flow bench with flow com. digital motor controller w/toolings $7500.00 Berco 151Bore Machine V/8 & V/6 setup & all tooling $7500.00 BHJ O Ring fixture B B Chevy BHJ Block True BHJ Lifter True Base Kit BHJ Lifter True B B Chevy BHJ .800 to .960 core drill & .842, .903 1” reamers 400 cfm Air Com. Dresser w/ 25 HP motor & 200 gallon air tank Storm Vulcan 15 Special crank grinder 5 wheels CALL QUINCY PROCELL: 409-886-0545 Email: neprocell@gmail.com

The Best Surfacer The Best On The Planet!

Surfacer On The Planet!

Precision surfacing that you can rely on to last many generations. Berco has 90 Precision that youquality can rely on plus yearssurfacing of manufacturing to last many generations.

Berco has 90 machines that last a lifetime! plus years of manufacturing quality machines that last aoflifetime!

Join the thousands shops that have experienced the quality of Berco, but Now at an an affordable affordable price. price you can join now at the thousands of shops that have experienced the quality of Berco.

58 TRADER MAGAZINE Fall 2017 trader-mag.com

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com Fall 2017 TRADER MAGAZINE 59

Get Abrasive!

ABS Blasting Media Abrasives for all Applications.

Cleaning parts, removing paint, powder coating, surface blending or surface preparation, ABS has the right type of blasting media for all your needs. We keep a wide variety of types and sizes in stock.

Give us a call to discuss which abrasive will work best with your application and machine.

BAKING SODA PLASTIC MEDIA

STEEL GRIT

ALUMINUM OXIDE

STEEL SHOT

(714)671-0728 ABS-Products.com sales info@@abs-products.com abs-products.com youtube.com/absproducts

GLASS BEADS

36˝ x 36˝ Special Shot Peening System w/ track

ABS Products Dual Shot Peener - N440 • • • • • • • •

36” x 36” shot peener with track and turntable designed to be moved by forklift, run on 110V, be portable 10” arm holes large window rubber lined interior lighting top of the line!

Small step available!

We make these up to 60” x 60” and larger! Call us for your custom shop needs!

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts trader-mag.com Fall 2017 TRADER MAGAZINE 61

NEW! Stainless Steel Piston Ring Grinder Stainless Steel Ring Grinder: Our New ultimate ring grinder is made of 303 Stainless Steel. Offering features such as: • Dead Nuts (automatic indicator zero reference return) • The adjustable ring mounting plate has a special 1 inch T-nut allowing complete usage of the abrasive wheel and has ring reference Indicator grooves, for faster and easier initial set up.

• Additional adjustable stops for grinding oil rings.

• New improved billet stainless ring clamp screws • It offers a high performance variable speed motor • 0-2750 rpms

CWT

Turntables are available in 3 sizes. 4”, 5” and 6”

New! 1” slot and adjustment system!

Add a Borzon or Diamond Grinding Disk to any unit for an additional $325.00 RG-9000-D – Ultimate Stainless Steel Ring package contains all 3 turntables and a Diamond or Borzon wheel – $2495.00

• The 4” table accommodates bore sizes from 2.300” to 4.000” • The 5” table accommodates bore sizes from 3.500” to 5.000” • The 6” table accommodates bore sizes from 4.500” to 6.000

Choice of Grinding Disks • PSA Micron Disks • Borzon Grinding Disks are available in 180, 220, 320 grit • Diamond Grinding Disks are available in 180, 220, 320 grit • Deburring wheels are available in Cratex or Scotch Brite Micron

Diamond or Borzon

RG-9000-4 - Disk, 4” Turntable ..................................$1,455.00 ...... $1,755.00 RG-9000-5 - Disk, 5” Turntable ..................................$1,555.00 ......$1,855.00 RG-9000-6 - Disk, 6” Turntable ..................................$1,655.00 ......$1,955.00

Piston Ring Squaring Tool

• Fast, easy and repeatable fixture for squaring • Rings in the bore prior to setting end gaps.

Covers bores from 2.000” to 5.000” and will clear head studs.

• Places rings 1.000” below the deck to get past head bolt distortion.

• No wrenches required.

• Change bore sizes in RG-9000-T-6 6” Turntable RG-9000-T-5 5” Turntable RG-9000-T-4 4” Turntable seconds! from 3” to 6” rings - $450 from 3” to 5” rings - $400 from 2” to 4” rings - $350 • NEW! Goes from 5.0” - 8.0” all the same features. Red Anodized.

ST-RST - 2.0” - 5.0” - $90.00 ABS Products • 714-671-0728 ST-RST-D - 5.0” - 8.0” - $120.00 ST-RST-3 - New 3” depth - $50.00* ABS-Products.com • youtube.com/absproducts *for use with Torque Plates

Wingnuts machined from billet stock just for us!

62 TRADER MAGAZINE Fall 2017 trader-mag.com

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts trader-mag.com Fall 2017 TRADER MAGAZINE 63

Wisdom from Gary

As Gary always said...

“It’s my way, or the wrong way”

Gary Thompson Founder of ABS Products

Gary’s legacy will continue by sharing with you his helpful tips in each issue.

64 TRADER MAGAZINE Fall 2017 trader-mag.com

Bobweights for virtually any engine. Whether you need a single cylinder bobweight for a Briggs and Stratton or a set of bobweights for a V10 Lamborghini, ABS Products has them in stock.

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 65

66 TRADER MAGAZINE Fall 2017 trader-mag.com

trader-mag.com Fall 2017 TRADER MAGAZINE 67

68 TRADER MAGAZINE Fall 2017 trader-mag.com

trader-mag.com Fall 2017 TRADER MAGAZINE 69

70 TRADER MAGAZINE Fall 2017 trader-mag.com

trader-mag.com Fall 2017 TRADER MAGAZINE 71

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

72 TRADER MAGAZINE Fall 2017 trader-mag.com

trader-mag.com Fall 2017 TRADER MAGAZINE 73

ABS Products • 714-671-0728 • www.abs-products.com Item

Description

1 thru 9

10 thru 24

25 thru 49

50 thru 99

100 Plus

HM-437-875

Heavy Metal 7/16" x 7/8" Dowel Pins

$23.18

$20.97

$19.53

$18.14

$16.80

HM-437-1100

Heavy Metal 7/16" x 1.100" Dowel Pins

$25.84

$23.40

$21.97

$20.58

$19.17

HM-500-500

Heavy Metal 1/2" x .500"

$10.05

$9.02

$8.30

$7.73

$7.27

HM-500-750

Heavy Metal 1/2" x .750"

$16.49

$14.54

$13.61

$12.45

$11.32

HM-500-830

Heavy Metal 1/2" x .830"

$18.14

$15.84

$14.83

$13.56

$12.32

HM-500-850

Heavy Metal 1/2" x .850"

$18.45

$16.63

$15.56

$14.25

$12.94

HM-500-900

Heavy Metal 1/2" x .900"

$19.07

$17.24

$16.17

$14.95

$13.59

HM-500-950

Heavy Metal 1/2" x .950"

$19.68

$17.63

$16.56

$15.34

$13.97

HM-500-1000

Heavy Metal 1/2" x 1.000"

$20.10

$18.05

$16.61

$15.47

$14.53

HM-500-1100

Heavy Metal 1/2" x 1.100"

$22.33

$20.11

$18.69

$17.00

$15.67

HM-500-1200

Heavy Metal 1/2" x 1.200"

$24.13

$21.81

$20.36

$18.27

$16.57

HM-500-1250

Heavy Metal 1/2" x 1.250"

$25.44

$22.82

$21.13

$19.52

$18.33

HM-625-750

Heavy Metal 5/8" x .750

$21.95

$19.02

$17.10

$15.30

$13.94

HM-625-1000

Heavy Metal 5/8" x 1.000"

$28.93

$25.96

$24.04

$22.23

$20.88

HM-625-1100

Heavy Metal 5/8" x 1.100"

$33.10

$28.96

$26.91

$24.88

$23.19

HM-625-1200

Heavy Metal 5/8" x 1.200"

$35.25

$31.66

$29.31

$27.16

$25.12

HM-625-1250

Heavy Metal 5/8" x 1.250"

$36.16

$32.46

$30.03

$27.74

$26.09

HM-750-750

Heavy Metal 3/4" x .750"

$28.90

$27.42

$25.92

$24.46

$22.96

HM-750-800

Heavy Metal 3/4" x .800

$29.97

$28.49

$26.99

$25.53

$24.03

HM-750-1000

Heavy Metal 3/4" x 1.000"

$31.39

$30.37

$29.58

$25.08

$25.97

HM-750-1100

Heavy Metal 3/4" x 1.100"

$33.85

$30.73

$32.06

$31.06

$28.38

HM-750-1200

Heavy Metal 3/4" x 1.200"

$36.09

$34.96

$33.85

$32.72

$30.32

HM-750-1250

Heavy Metal 3/4" x 1.250"

$38.80

$37.33

$35.83

$34.36

$32.87

HM-875-500

Heavy Metal 7/8" x .500"

$19.62

$18.84

$18.27

$17.15

$16.13

HM-875-700

Heavy Metal 7/8" x .700"

$26.80

$26.15

$25.25

$23.89

$22.79

HM-875-750

Heavy Metal 7/8" x .750"

$27.95

$26.87

$26.07

$25.17

$24.33

HM-875-800

Heavy Metal 7/8" x .800"

$33.70

$30.32

$29.52

$28.62

$27.77

HM-875-1000

Heavy Metal 7/8" x 1.000"

$35.75

$32.23

$29.99

$28.69

$27.79

HM-875-1100

Heavy Metal 7/8" x 1.100"

$38.83

$35.25

$33.03

$31.15

$30.25

HM-875-1200

Heavy Metal 7/8" x 1.200"

$41.25

$37.66

$34.22

$33.52

$31.72

HM-875-1250

Heavy Metal 7/8" x 1.250"

$45.52

$40.85

$37.81

$34.96

$33.61

HM-1000-500

Heavy Metal 1" x .500"

$20.00

$19.59

$18.84

$18.19

$17.64

HM-1000-700

Heavy Metal 1" x .700"

$28.23

$27.42

$26.63

$25.57

$24.71

HM-1000-750

Heavy Metal 1" x .750"

$30.02

$29.81

$28.23

$27.37

$26.49

HM-1000-800

Heavy Metal 1" x .800

$32.61

$31.99

$30.42

$29.54

$28.67

HM-1000-825

Heavy Metal 1" x .825"

$33.08

$32.61

$31.30

$30.43

$29.55

HM-1000-880

Heavy Metal 1" x .880"

$35.18

$34.45

$33.12

$32.14

$31.07

HM-1000-1000

Heavy Metal 1" x 1.000"

$40.01

$39.15

$37.66

$37.55

$35.32

HM-1000-1100

Heavy Metal 1" x 1.100"

$42.26

$41.60

$40.43

$38.40

$36.60

HM-1000-1200

Heavy Metal 1" x 1.200"

$43.64

$42.59

$41.07

$39.80

$38.52

HM-1000-1250

Heavy Metal 1" x 1.250"

$46.72

$44.92

$43.13

$41.40

$40.66

74 TRADER MAGAZINE Fall 2017 trader-mag.com

ABS Products • 714-671-0728 • www.abs-products.com

We stay stocked up!

is ad for Mention th nt! ce discou ri p n m lu o next c

We will cut weld chamfers upon request.

Item

Description

1 thru 9

10 thru 24

25 thru 49

50 thru 99

100 Plus

HM-1000-1260

Heavy Metal 1" x 1.260"

$47.32

$45.53

$43.42

$41.69

$40.94

HM-1125-760

Heavy Metal 1 1/8" x .760"

$56.84

$55.75

$54.66

$53.56

$52.47

HM-1125-800

Heavy Metal 1 1/8" x .800"

$57.90

$56.81

$55.72

$54.62

$53.51

HM-1125-1000

Heavy Metal 1 1/8" x 1.000"

$58.92

$57.83

$56.75

$55.64

$54.53

HM-1125-1100

Heavy Metal 1 1/8" x 1.100"

$60.66

$59.50

$58.35

$57.25

$56.08

HM-1125-1200

Heavy Metal 1 1/8" x 1.200"

$62.39

$61.22

$60.08

$58.92

$57.75

HM-1125-1250

Heavy Metal 1 1/8" x 1.250"

$64.71

$63.99

$62.32

$61.11

$59.96

HM-1125-1260

Heavy Metal 1 1/8" x 1.260"

$65.56

$64.86

$63.18

$61.98

$60.77

HM-1125-1850

Heavy Metal 1 1/8" x 1.850

$75.68

$72.97

$71.29

$70.08

$68.88

HM-1250-1000

Heavy Metal 1 1/4" x 1.000"

$67.53

$66.32

$64.97

$63.83

$62.57

HM-1250-1100

Heavy Metal 1 1/4" x 1.100"

$69.89

$68.67

$67.32

$66.18

$64.91

HM-1250-1200

Heavy Metal 1 1/4" x 1.200"

$72.24

$70.89

$69.36

$68.20

$66.88

HM-1250-1250

Heavy Metal 1 1/4" x 1.250"

$74.55

$73.18

$71.77

$70.40

$69.04

HM-1375-500

Heavy Metal 1 3/8" x .500"

$67.37

$66.01

$64.60

$63.23

$61.89

HM-1375-750

Heavy Metal 1 3/8" x .750"

$77.18

$75.76

$74.34

$72.92

$71.67

HM-1375-1000

Heavy Metal 1 3/8" x 1.000"

$81.56

$80.00

$78.55

$77.00

$75.28

HM-1375-1200

Heavy Metal 1 3/8" x 1.200"

$83.86

$82.34

$80.73

$79.22

$77.67

HM-1375-1250

Heavy Metal 1 3/8" x 1.250"

$86.18

$84.72

$83.58

$81.42

$80.06

HM-1500-1000

Heavy Metal 1 1/2" x 1"

$118.48

$116.91

$115.47

$113.92

$112.20

HM-1500-1250

Heavy Metal 1 1/2" x 1250"

$122.30

$120.73

$119.28

$117.73

$115.89

HEAVY METAL BARS are sold by the inch in length Item

Description

Price/Inch 1”W x 12”L

HM-312-4500

Heavy Metal Bars 5/16”H x 4-1/2"L

$25.00/Inch

$112.50

HM-375-6000

Heavy Metal Bars 3/8”H x 6"L

$25.00/Inch

$150.00

HM-437-4000

Heavy Metal Bars 7/16”H x 4"L

$25.00/Inch

$100.00

Item HM-500-12000

Description Heavy Metal Bars 1/2" H x 12" L

Price/Inch 1”W x 12”L $20.10/Inch $241.20

HM-625-12000 HM-750-12000

Heavy Metal Bars 5/8" H x 12" L

$28.93/Inch

$347.16

Heavy Metal Bars 3/4" H x 12" L

$31.39/Inch

$376.68

HM-875-12000

Heavy Metal Bars 7/8" H x 12" L

$35.75/Inch

$411.12

HM-1000-12000

Heavy Metal Bars 1" H x 12" L

$40.01/Inch

$480.12

HM-1125-12000

Heavy Metal Bars 1-1/8" H x 12” L

$58.92/Inch

$621.46

HM-1250-12000

Heavy Metal Bars 1-1/4" H x 17” L

$67.53/Inch

$810.36

HM-1375-12000

Heavy Metal Bars 1-3/8" H x 12" L

$81.56/Inch

$978.72

HM-1500-8000

Heavy Metal Bars 1-1/2" H x 12" L

$118.48/Inch $1,421.76 trader-mag.com Fall 2017 TRADER MAGAZINE 75

The Ultimate Piston Fixtures Jaws can be sold seperately for any ring width: 3/16˝ down to .5 mm!

10” Tilting Rotary Table with 8” Chuck & special Piston Jaws

Standard ABS Piston Fixture

See the video: YouTube.com/absproducts Special Diesel Jaws for 6”& 8” Chuck

Special Chuck for Machining Sleeves

IMPORT TUNERS & MOTORCYCLE BUILDERS: we have many new jaws for small bore motors!!!

Jaws available for 6” & 8” chucks.

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

7-1/2” Blank Piston Fixture Jaw: we machine this to fit YOUR ring groove! Or you can purchase blanks and machine yourself. Available for 6” and 8” chucks as well. www.performancetradermagazine.com

76 TRADER MAGAZINE Fall 2017 trader-mag.com

ABS Products

The Worlds Largest Inventory of Heavy Metal for Balancing Crankshafts

Finished Pieces

Bar Stock

Flat Plate Heavy Metal Chassis Weights 2-5/8”W x 5-3/8”L x either .140 and .240 Thicknesses; Stackable to bolt on for balancing chassis on Indy cars, stock cars, NASCAR, dragsters ballasts. .140 = 480 grams; .240 = 980 grams Round Bar Stock - 2”D x 2”L & 2”D x 3”L for making your own slugs or chassis balancing.

Round Bar Stock 15”L x 1-1/8”D, 1-1/2”D or 1-3/8”D cut your own crankshaft slugs. Call 714-671-0728

“You Can Be The Best if You Buy From ABS” 591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com Fall 2017 TRADER MAGAZINE 77

Heavy Metal Checking Weights lf you’re tired of the guess work involved when balancing with heavy metal you need Heavy Metal Tungsten Checking weights! Quickly and accurately establish the exact location and amount of heavy metal needed prior to drilling. Our check ing weights fit securely between crankshaft counterweights al lowing the exact simulation of heavy metal. Get it right the first time everytime! Available in 1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4” and 1-3/8” diameters in simulated lengths of 1.200” *made from steel

Part Number Item Description Price CW-100 Checking Weights - 1” Heavy Metal gms ................................................................................................................... 50.00 CW-1125 Checking Weights - 1-1/8” Heavy Metal....................................................................................................................... 60.00 CW-1250 Checking Weights - 1-1/4” Heavy Metal....................................................................................................................... 70.00 CW-1375-1250 Checking Weights - 1-3/8” Heavy Metal for 1.250” long pieces................................................................................... 80.00 CW-1375-750 Checking Weights - 1-3/8” Heavy Metal for .750” long pieces .................................................................................. 80.00 CW-500 Checking Weights - 1/2” Heavy Metal .......................................................................................................................... 30.00 CW-625 Checking Weights - 5/8” Heavy Metal .......................................................................................................................... 35.00 CW-750 Checking Weight - 3/4” Heavy Metal ............................................................................................................................ 40.00 CW-875 Checking Weights - 7/8” Heavy Metal .......................................................................................................................... 45.00 CW-PB Poor Boy Checking Weights - Coupler with bolt - Add Balancing Clay to make any size Chking Wt.................... 7.00

R8 Collet required for straight shanks: 7/16”, 9/16”, 5/8”, 3/4”, 7/8” $125.00 Morse Taper version available for same price

Heavy Metal Start-Up Kit “Get Started Installing and Balancing with Heavy Metal” Getting starled on anything is usually the hardest part, but with the Heavy Metal Start Up Kit you’ll be installing and balancing with heavy metal in no time. We’ve included all the necessary drills and reamers needed for the installation plus enough Heavy Metal for several balance jobs. And just so we could assist you in those balance jobs, we went ahead and included 20 Heavy Metal Checking Weights. These checking weights will enable you to accurately determine the precise amount and location (prior to drilling) where Heavy Metal is needed.

Heavy Metal Start-Up Kit comes with: (10) 1” x 1.200” pieces of heavy metal and (8) checking weights (10) 7/8” x 1.200” pieces of heavy metal and (8) checking weights (10) 3/4” x 1.200” pieces of heavy metal and (2) checking weights (5) 5/8” x 1.200” pieces of heavy metal and (2) checking weights (10) 1/2” x 1.200” pieces of heavy metal and (2) checking weights (2) 7/16” x 7/8” heavy metal dowel pins for Chevrolet (1) Drill bit in each of the following sizes: 31/32”, 27/32”, 23/32”, 19/32”, 15/32” (1) Reamer in each of the following sizes: 1”, 7/8”, 3/4”, 5/8”, 1/2” *specify straight shank or Morse taper when ordering Optional 3/4” straight shank to #3 Morse taper and adapter add $59.00 78 TRADER MAGAZINE Fall 2017 trader-mag.com

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

Call for availability 714-671-0728

Heavy Metal Available Sizes

Dia. x Length Tungsten

7/16” x .875” 1/2” x .750” 1/2” x 1.000” 1/2” x 1.200” 1/2” x 1.250” 5/8” x 1.000” 5/8” x 1.200” 5/8” x 1.250” 3/4” x 1.000” 3/4” x 1.200” 3/4” x 1.250” 7/8” x .500” 7/8” x . 700” 7/8” x .750” 7/8” x 1.000” 7/8” x 1.100” 7/8” x 1.200” 7/8” x 1.250” 1” x .500” 1” x . 700” 1” x .750” 1” x .850” 1” x 1.000” 1” x 1.100” 1” x 1.200” 1” x 1.250” 1-1/8” x 1.000 1-1/8” x 1.200 1-1/8” x 1.250 1-1/4” x 1.000 1-1/4” x 1.200 1-1/4” x 1.250 1-3/8” x .750 1-3/8” x 1.250 1-1/2” x .600 1-1/2” x 1.000 1-1/2” x 1.250

38 43 57 65 72 91 109 114 122 147 162 87 117 127 169 186 198 210 111 153 164 190 227 243 265 275 282 325 350 346 418 445 328 543 304 504 635

Steel

17 19 25 30 31 39 47 49 56 67 70 38 54 58 77 85 92 96 50 70 75 85 100 110 120 125 127 153 160 157 189 196 142 237 135 226 283

Net Gain

21 24 32 35 41 52 62 65 66 80 92 48 63 70 92 101 105 114 61 83 89 102 127 133 145 150 155 172 190 189 229 249 186 306 169 278 352

BARSTOCK:Available in 1/2”, 5/8”, 3/4”, 7/8” 1”, 1-1/8”, 1-1/4” & 1-3/8” Diameters TRADER INT’L MAGAZINE/FALL 2015

www.performancetradermagazine.com

39

trader-mag.com Fall 2017 TRADER MAGAZINE 79

Is Non-Destructive Cleaning Critical?

ARMEX Is The Only Choice When cleaning parts that cannot have the specifications or surface tolerances change, the only blasting abrasive to use is ARMEX. Other hard blasting abrasives can remove surface materials, damage threads and change the specifications along with surface tolerances rendering the parts unusable.

The gentle physical propriety of baking soda but yet aggressive cleaning ability is what makes ARMEX the only choice. ARMEX is environmentallyfriendly and soluble. It can dissolve in water, oil, antifreeze and transmission fluid. Because ARMEX is soluble it will never leave blasting particles behind in critical or hidden passageways like other hard blasting abrasives which can increases the risk of parts failure when placed back into service.

Use ARMEX to clean, de-grease, remove burnt on carbon and paint on a wide variety of materials including steel, aluminum, lead, alloys, plastics, rubber and composites.

Before

After

Before

After

ARMEX for When Non-Destructive Cleaning is Critical.

Learn more at www.armex.com

Before & After

ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc. Pantone 2758 C

80 TRADER MAGAZINE Fall 2017 trader-mag.com

Blizzard Stage III Soda Blaster Using GhostFlow™ Technology

Production applications are what the Blizzard Stage III was designed for, if you have multiple daily shifts we offer dust collector upgrades to 880 sq.ft. with automatic timed reverse pulse cleaning that includes manual over-ride controls.

Clean any part down to the original finish and do it with a water soluble abrasive to eliminate any abrasive residuals and know the part has been unchanged.

95% of the used soda is collected outside the cabinet preventing it from entering the advanced easy clean dust collector with Automatic Timed Reverse Pulse Cleaning Cycle. The Blizzard also includes manual pulse over-ride controls for added cleaning. The Pneumatic Vibratory Cleaning Cycle is also standard allowing the user up to four ways to clean the dust collector to make sure it’s always clean..

STANDARD MACHINE FEATURES • Four (4) Standard Cabinet Sizes 36x36, 48x36, 48x48 & 6060 (w x d) • 13” x 24” ClearView™ Window with Window Sweep • Easy Clean MERV Tested Cartridge Filters • Auto/Timed Reverse Pulse Dust Collector Cleaning Cycle with manual over-ride controls • Pneumatic Vibrator Dust Collector Cleaning Cycle • Magnahelic Monitor Gauge • 1100 CFM Blower w/ Silencer • Pneumatic Conveyor with 95% Used Soda Collection before the dust collector • Easy to use Soda Pressure Generator • ASME Code 1.0 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 10 to 22 CFM Soda Nozzles • Ergo Flexible Abrasive Hose • Pneumatic Vibrator Soda

Come See Us at PRI Booth 5211

Feed System

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts trader-mag.com Fall 2017 TRADER MAGAZINE 81

The Rottler F79A Specifically Designed for Both the Performance Engine Builder and the Diesel Engine Remanufacturer Performance Racing Engine Builder requires a versatile machining center that can handle a wide variety of engine machine work. The Diesel Engine Remanufacturer requires an automatic machine that is easy to learn and fast to operate so any block can be machined quickly and accurately. The F79A offers both! The F79A performs multiple jobs such as boring/sleeving, surfacing (heads and blocks), main and camshaft line boring, industrial CNC machining, and can handle a wide variety of engine machine work.

82

THE CUTTING EDGE

THE CUTTING EDGE

• Extra Long T Slot Table for Dual Workstation and Large Diesel Blocks • Optional 4th axis automatic roll over fixture for increased productivity • Optional Automatic Tool Changer for Production Machining • Optional Full Enclosure for Safety and Chip Containment

8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 www.rottlermfg.com www.youtube.com/rottlermfg www.facebook.com/rottlermfg contact@rottlermfg.com

The NEXT GENERATION

SURFACER has landed!

The All New Rottler Surfacing machines have been completely redesigned with the latest CNC technology and proven designs found in Rottler CNC machining centers!

Handles the smallest parts to large diesel cylinder heads ■ Simple Touch Screen Control saves time and resources ■ Traveling Column design and Full Enclosure with Folding Door save floor space and keeps work area clean ■ Special design castings and enclosure directs chips down into roll out chip tray keeping machine clean and allows for easy and fast chip disposal ■ 19”/480mm Power Vertical Travel on linear slideways allow set up for different height jobs without parallels/risers ■ Remove large amounts of material in one set up with Programmable Multi Pass Downfield ■

THE CUTTING EDGE 8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050 www.youtube.com/rottlermfg www.facebook.com/rottlermfg contact@rottlermfg.com

1-800-452-0534 www.rottlermfg.com

83

3 YEAR WARRANTY GUARANTEED PRODUCTIVITY

CNC AUTOMATIC HONING

• Completely Unattended Automatic Hole-to-Hole Operation • Crash Protection prevents damage to tooling (Patent Pending) • Ease of programming – only 2 screens for a new block • Accuracy of size and surface finish including Rk parameters • Ease of Maintenance – roll out coolant tank with 3 stage filtering • Dual Stage and Multi Stone Hone Heads • Hone Head Quick Change plus Zero Setting System • Reverse Rotation allows improvement of Surface Finish Rottler encourages you to compare features with the competition.

Don’t take our word for it, ask a H85X owner or better yet, ask us for a demo today!

Today’s high performance piston rings require precise surface finishes, for reduced friction and a perfect seal.

Rk, Rpk & Rvk parameters are the latest in measuring technology to achieve the results necessary for today’s high performance rings. The Rottler CNC Honing Machines utilize advanced CNC control and super abrasives to give the cylinder bore surface finish results that we require – every time! Rottler Honing Expertise is up to date with the latest technology, and they are always there to help with questions – fast!!

– Keith Jones Total Seal Piston Rings

Used by Professionals such as RoushYates and BES Racing to save time and improve bore finish.

Phoenix, Arizona

THE CUTTING EDGE 8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050 www.youtube.com/rottlermfg www.facebook.com/rottlermfg contact@rottlermfg.com 84 TRADER MAGAZINE Fall 2017 trader-mag.com

1-800-452-0534 www.rottlermfg.com