__MAIN_TEXT__
feature-image

Page 1

FT ®

TRUSTED BRAND, MARKET ADOPTED

www.newen.com • www.facebook.com/newenfixedturning

SERIES

CNC valve seat machining by interpolation of axes

They machined, they outclassed... and then they reviewed. See why professionals like you are loving it.

FT ®

ONE SINGLE TOOL FOR ANY VALVE SEAT MATERIALS (HARD, SOFT, ABRASIVE...), NO MORE CHATTER, NO LAPPING EVER, PERFECTION ALWAYS!


2

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

3


FARRIS EQUIPMENT SALES, INC. “Specializing in Late Model and Used Engine Rebuilding Equipment” Lubbock, TX (806) 762-0887 (800) 882-1808 CYLINDER BORING MILLS & BARS: Kwik-Way #FL, #FN, #FW, & #FWS bars Kwik-Way #FL & #FN Overbore Kits Kwik-Way #EBF Boring Stand Kwik-Way Triangle Boring Stands

SUNNEN HONING EQUIPMENT & RELATED:

VALVE GUIDE & SEAT EQUIPMENT: Serdi #60 Peterson #TCM-25 Kwik-Way #020

#CRG-750 & #CG-8400 Cap Grinders

#CV-616 & #CK-10 Cylinder Hones #LBB-1699 Rod Hone – Very clean #LBB-1810 Power-Stroked, #LBB-1699, #LBB-1499, & #MBB-1660 Rod Hones & Shop Large #CR Mandrels from 2.9” to 4.5” Large #Y104-6562 Special Aluminum mandrel #HS-30 Valve Guide Hone

HEAD & BLOCK MILL/SURFACERS/FIXTURES: Peterson/Berco #RSC-1550 Surfacer Winfield #DSF-2000 Head/Block Fixture DCM Quick-Level Head Table Peterson #50 Surfacer

#TN-111 Rod Aligners #BP-10 Piston Pin Press CRANKSHAFT GRINDERS & RELATED: Berco #RTM-351A Grinder –Rebuilt (in Ohio) Gleason #M-2 Crank Welder

LINE BORE EQUIPMENT: Tobin-Arp #TA-15 & #TA-14 Flat Top Machines (We need some nice line bores)

Storm #CSP-78 Crank Press Peterson #CRP-6 Crank Press

MISCELLANEOUS: Sunnen #DCB-750 Computer Balancer; AXE #UP-1437 Head Pressure Tester; Kans. Inst. #ALOV-89 Head Oven; NEW Kwik-Way #016 Valve Refacer; Berco #RAC-1500 Camgrinder; Winona Flywheel Grinder; ABS Downdraft Cabinet; and other equipment too numerous to mention. OUR INVENTORY CHANGES WEEKLY! Check our website for most current listing. EQUIPMENT NEEDED: Sunnen CH-100 Line Hones; Sunnen #CV616 Cylinder Hones; Late model CBN Surfacers; Sunnen #CK-10 cylinder hones in good condition, Serdi, Rottler & Sunnen Seat/Guide Machines; Nice line bore machines; Boring/Surfacing Mills(all sizes); Sunnen #PLB-100 Line Bore Kit; DCM, Van Norman, & Winona Flywheel Grinders; Storm Kotifin Crankshaft Polisher; Sunnen #VR7000 or 8000 Valve Refacers: Sunnen #CHW-40 Work Stations; and any other equipment we can make money on. WE ARE LOOKING FOR LATER MODEL, NICER EQUIPMENT. If I can’t buy it, I will try to broker it for you! Send photos of what you wish to sell to sam@farrisequipment.com

www.farrisequipment.com E-mail: Sam@farrisequipment.com

SAM FARRIS

Sam is ready to make some deals! 4

TRADER MAGAZINE Summer 2021 trader-mag.com


Proud member of

CUT AND SAvE TO fILE

and supplier of KMSG Buying Group ORDER LINE:

NEW!

1-416-321-6966 1-866-210-9251

Cummins ISB 5.9 (24 valves)

Cummins ISC 8.3 (24 valves)

Cylinder Head (Bare) .......................... Call for price Cylinder Head (Complete) ................ Call for price Crankshaft (Steel forged) ................ Call for price Gasket Kit (Upper) .............................. Call for price Gasket Kit (Lower) .............................. Call for price Connecting Rod .................................... Call for price

Cylinder Head (Bare) .......................... Call for price Cylinder Head (Complete) ................ Call for price Crankshaft (Steel forged) ................ Call for price Gasket Kit (Upper) .............................. Call for price Gasket Kit (Lower) .............................. Call for price Connecting Rod .................................... Call for price

Cummins 8.3L (6C, 6CT, 6CTA)

Cummins 5.9L (6B, 6BT, 6BTA, 6BTAA)

Cummins 3.9L (4B, 4BT, 4BTA)

Complete Head: Call for price Bare Head: Call for price

Complete Head: Call for price Bare Head: Call for price

Complete Head: Call for price Bare Head: Call for price

Cylinder Blocks

Crankshafts

Camshafts

• GM 6.5 (truck & van) • Cummins 8.3 6CT • Cummins 3.9 4BT • Caterpillar 3306(DI) • Cummins 5.9 6BT

• Cummins 4BT 3.9 • Cummins 6CT 8.3

• Cummins 6BT 5.9 • Caterpillar 3306

• Cummins 3.9 • Cummins 5.9

• Cummins 8.3

CALL fOR pRICE QUOTE CyLINDER HEAD • GM 6.5 (Truck & Van) • Chevy 350 (Vortec) • Chrysler 318/360 • Chrysler 3.9 • Caterpillar 3306(PC) 8N1187 • Caterpillar 3306(DI) 8N6796 • Caterpillar 3304(PC/DI) • Caterpillar C15

• Jeep 4.0 (#331) • Ford 4.0 (Early, Late) • Ford 6.0 • Detriot 4-71 • Detriot 6-71 • Cummins 6.7

ACCESS INDUSTRIES CO. LTD

LONG BLOCK

CONNECTING ROD

OIL COOLER

GASKET KIT

• Cummins 5.9 • Cummins 3.9 4BT • Cummins 8.3 6CT

• Cummins 5.9/3.9(6BT/4BT) • Cummins 8.3 (6CT) • GM 6.5 NEW

• Cummins 3.9 • Cummins 5.9 • Cummins 8.3

• Cummins 3.9 Upper Kit • Cummins 3.9 Lower Kit • Cummins 5.9 Upper Kit • Cummins 5.9 Lower Kit • Cummins 8.3 Upper Kit • Cummins 8.3 Lower Kit

ORDER LINE: “Prices subject to change - please call for pricing”

1-416-321-6966 1-866-210-9251

E-MAIL:

access.industries@hotmail.com

trader-mag.com Summer 2021 TRADER MAGAZINE

5


ABS Products “IT’S IN THERE”

Revco Precision 18

Access Industries 5

Robins 11, 18, 31, 49, 73

AERA 22

Rottler 74-76

Air & Power Tools 18

RPM Equipment Sales 51

American Gasket 21

RT Sales 48

Armex 59

Serdi 35

Baker Equipment Sales 20, 37

T & S Machine 26-27

Blackstone-Ney Ultrasonics 52

Turner Technology 14

Business Card Marketplace 18

Ultrasonic 33

Classifieds 46

Winona Van Norman 60-69

Coder 21

Comec 8, 10, 17 CWT Industries 2-3 Dakota Parts 20 Energy Suspension 15 Farris Equipment 4 Ferrea Valves 20 Goodson 53 Irontite 43 Jamison Equipment 13 Jeff Ginter Racing Engines 71 K & S Regrinding 20 Kwikway 43 Media Blast & Abrasive 40, 42 Newen 1, 7 Quality Cutter Grinding 15

Ad Rates/Specifications 47


UNLEASH YOUR POWER WITH NEWEN FIXED-TURNING

®

Always stay one step ahead of the competition

Reach a new level of performance with our 2021 VISION™Series!

www.newen.com • www.facebook.com/newenfixedturning

Request your no obligation quote today at contact@newen.com

• ONE Machine • ONE Single Tool COUNTLESS OPPORTUNITIES

FIXED-TURNING FIXED TURNING Unmistakably the best!

SERIES

...a technology concentrate!

®

TM

trader-mag.com Summer 2021 TRADER MAGAZINE ERT FALL2019 P7.indd 1

8/20/2019 11:42:49 AM

7


8

TRADER MAGAZINE Summer 2021 trader-mag.com


CRANKSHAFT STROKE GAUGES Mountain Motors Large stroke V-8s

$190.00

New Stroke checker goes up to 12˝ stroke and the V’s open up to 12˝ apart for the mains.

*plus veneers

This crank rests on ABS Adjustable V-blocks Knowing the exact stroke is very important when ordering pistons and setting deck heights. Can also be used for checking unknown cranks. Just tighten your favorite digital caliper (not included) onto the bridge, sweep the journal at the top, zero your gauge and repeat at the bottom of the stroke for a direct stroke reading. No math involved! Adjustable V blocks for spacing. Will measure up to a 6.000˝ stroke (w/ 8-12˝ customer supplied digital caliper) BBC with STD journals. Very Fast!

Big Diesel, 3 main bearing 6 cyl, flathead Ford NO.

DESCRIPTION

PRICE

ST-5010

Specialty Tools - Stroke Gauge (Standard Red Gauge only)

$190.00

ST-5251-3 ST-4100-3436

Diesel Stroke Checker (12˝ Veneers sold separately) 6˝/150 mm Yellow LCD Digital Electronic Caliper

$300.00 $80.00

ST-4100-3438

8˝/200 mm Yellow LCD Digital Electronic Caliper

$100.00

ST-4100-3440

12˝/300 mm Yellow LCD Digital Electronic Caliper

$125.00

12˝ legs

$100.00

We sell these to work with a 5˝ or 6˝ Starret Indicator. Buy your own indicator and we provide the mounting bracket! 591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts trader-mag.com Summer 2021 TRADER MAGAZINE

9


ACF200.CNC CNC Boring Mill

RP1400

CNC Head & Block Surfacer

BEST VALUE IN THE INDUSTRY! VPT160

RP1000

Pressure Tester

Head & Block Surfacer

BGV260

Seat & Guide Press

Includes Valve Spring Assemby Tools

RV516

Valve Refacer

800-887-6076 info@comecus.com 10

TRADER MAGAZINE Summer 2021 trader-mag.com

www.comecus.com


trader-mag.com Summer 2021 TRADER MAGAZINE

11


The Charger Production Pressure Blast Machine uses a large 1.0 cubic foot capacity ASME Coded pressure pot to pneumatically push the abrasive to the part using the nozzle ID size and blasting pressure to determine the compressed air usage. Pressure Blasters require less cfm to create the same abrasive velocity during operation. Direct pressure machines produce faster abrasive particle velocity, higher abrasive grain density and greater abrasive frictional heat for heavy coating removal and cross-drill de-burring.

• Three (3) large cabinet sizes all with 36 inch inside height • All three (3) cabinet sizes offer the Space Saving Side Mounted Dust Collector • Operator Platform Included • Direct Pressure can do something siphon can’t….. creates the fastest abrasives velocity….creates the highest frictional heat….blast into blind holes and pneumatically pushes abrasive through cross drill holes. • Blast using light plastic abrasives or heavy steel shot, steel grits and all the other standard abrasives like glass beads, aluminum oxide, silicon carbide • LED Lighting • Boron Carbide Nozzle, • Large 24” ClearView Operator Window • Air Velocity Window Sweep for better visibility • Clean, Strip, Peen using all abrasive types • Also includes many more Standard Features not listed

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 12

Shown with optional Turntable


JAMISON: your best source for

Automotive Shop Equipment DCM Tech HB3800 CBN Resurfacer

Pro Bal Digital Crank Balancer Package

$15,250

$9,500 Sunnen 920 Cap Grinder

Kwik Way FWSII Boring Bar & Model 1291 Boring Stand

$5,995

$2,850

Crankshaft Straightener

RMC-10 CBN Resurfacer Delta Custom Tools

$3,450

$16,250

We are Authorized Dealers for the following lines of parts & equipment:

Look to AXE

PO Box 276 • 1908-11th Street, Emmetsburg, IA 50536 • Fax: 712-852-3570

800-841-5405

www.jamisonequipment.com trader-mag.com Summer 2021 TRADER MAGAZINE 13


14

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

15


Automotive Production Dominator Siphon This 100% welded 12 and 14-gauge steel Production Siphon Blaster includes the patented bolt-on internal abrasive separator reclaimer and a long list of included standard features for use with any abrasive 0-150 mesh and gun sizes 25 to 90 cfm. Three standard cabinet models 3636, 4836 and 4848 all with 36” cabinet heights and side mounted dust collectors for space saving footprint.

• 13”X 24” Large view window • LED Lighting • 10” work ports • Fast Cleaning Siphon Delivery for easy operation and low maintenance • Gun Sizes to 90 cfm for highest frictional heat and fastest cleaning • Quickly remove rust….paint…. carbon….heat discoloration and more using high frictional heat to decrease cleaning time • Space Saving Side Mounted Dust Collector with 700 cfm blower • 220 sq’ MERV Tested Cartridge Filter • Many Part Handling Options Available • Optional HEPA After Filtration for Cell Machine Operations available • Pneumatic Dust Collector Cleaning • More Included Standard Features than any other manufacture of abrasive blasting cabinets in today’s market

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

16

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

17


Seat Chuck

#1 (22 a 38mm) #2 (35 a 49mm) #0 (14 a 26mm)

New 14mm to 26mm seat chuck for turning the OD valves in motorcycles and cars. $195.00 for any size. Call 714-671-0728

*See full advertisements on pages 11, 31, 49 & 73

18

TRADER MAGAZINE Summer 2021 trader-mag.com


ABS 20 Ton Power Hydraulic Floor Shop Press Ideal for heavy metal installation, removing & installing bearings, bushings, balancers and more!

• Load capacity: 20 ton • Overall height: 61.5" • Table height is adjustable in 5" increments • Working Height 1” to 44.5” • Slide in Press Plate Included • Convenient foot operated air/hydraulic motor • Sliding head allows for offset pressing • Heavy-duty H-frame constructed of highgrade steel

Accessories Included

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

19


20

TRADER MAGAZINE Summer 2021 trader-mag.com


214-388-0603

trader-mag.com Summer 2021 TRADER MAGAZINE

21


R

AT

ING

PR

EB

OS

CEL

• Over 11,000 engine specifications from 200+ manufacturers covering a wide variety of engine applications • Quickly identify cylinder blocks, heads, crankshafts, camshafts, connecting rods and flywheels by casting number • Contains over 3,000 AERA Technical Bulletins • Provides a customer database feature allowing you to create estimates, work orders and invoices • Engine Information on Demand – save time by not having to search through multiple resources to obtain engine information • Designed and optimized for use on mobile devices like smartphones and tablets • AERA provides automatic daily updates to keep information completely current and accessible 24/7

IS

Find engine specifications fast and easy with our specialized, web-based software

30 YEARS

OF

AERA members – for a free trial, call Karen (888) 326-2372 ext. 202, email karen@aera.org, or visit the website to learn more:

www.aera.org/prosis

THE SOURCE FOR INFORMATION 875 feinberg cou r t, s ui te 106, ca r y , i L 600 1 3 P ho ne 888-326-23 7 2 or 815- 526- 7600 fax 888-329-2372 or 815-526-7601 • info@aera.org

www.aera.org 22

facebook.com/ aeraep

TRADER MAGAZINE Summer 2021 trader-mag.com

twitter.com/ aeraep

instagram.com/ engineprofessionalmag

youtube.com/ AERAEngineBuildersAssociation


THE FINISH LINE ABS carries over 100 different styles and sizes of belts to meet all of your finishing needs! Soft Back•Diamond•Micro Finish•Hard Back•Cork•Scotch Bright

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

trader-mag.com Summer 2021 TRADER MAGAZINE

23


24

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

25


BLOCKMASTER CNC CNC BLOCK BLOCK BLOCKMASTER MACHINING SYSTEM SYSTEM MACHINING Probe,bore boreand anddeck deckaablock blockinin20 20minutes. minutes.While While Probe, youare arethere thereclearance clearancethe theblock blockfor forstroker strokercranks. cranks. you Sinceyou youjust justdecked deckedit,it,go goahead aheadand andO-Ring O-Ringthe the Since decksince sincewe wehave havethe theoperation operationsaved. saved. deck Weare arejust justas ascomfortable comfortableboring boringaaV-8 V-8and and We followingititwith withaasix-cylinder six-cylinderinline inlineand andthen thenaa following V-660 60degree degreewith withno nosaved savedprograms programsor orspecial special V-6 setups. We have built and automated job shop setups. We have built and automated job shop blockmachining! machining! block Anyonewith withengine enginebuilding buildingknowledge knowledgecan canrun run Anyone the BlockMaster after a couple of days with the the BlockMaster after a couple of days with the includedfactory factorytraining trainingininyour yourshop. shop. included

Thisisisaacouple coupleof ofhours hourswork workon onthe theBlockMaster BlockMaster This 18 26

TRADER RADER M MAGAZINE AGAZINE Summer Winter 2020 T 2021 trader-mag.com trader-mag.com

Youcan canalso alsomake makethese thesewith withthe theBlockMaster! BlockMaster! You


PROBAL 500 500 DELUXE DELUXE PROBAL CRANKSHAFT BALANCER BALANCER CRANKSHAFT Youmight mightask, ask,“Maybe “Maybethere thereisisaa‘better’ ‘better’ You system out there?”, we don’t believe system out there?”, we don’t believe so! T&S T&Shas hasinvested investedheavily heavilyininbuilding building so! thequickest, quickest,most mostsensitive sensitiveand andaccurate accurate the balancing software available. We can balancing software available. We can performmeasurements measurementsininless lessthan thanthree three perform seconds.We Wecalculate calculatedrill drilldepths, depths,and and seconds. whenwe wetell tellyou youto todrill drillininaaparticular particular when locationthere thereisisno nochasing chasingthe theangle angle location backand andforth. forth.We Wehave havebuilt-in built-inreports reports back showing the customer what the actual showing the customer what the actual necessarytolerance tolerancefor foreach eachcrankshaft crankshaftisis necessary andthe theactual actualbalance balanceachieved. achieved. AAmore more and sophisticatedbalancing balancingsoftware softwaredoes doesnot not sophisticated exist,and andwe wecan canprove proveit.it. exist, T&Suses usesthe thesame samesystem systemfor forbalancing balancingturbocharger turbochargerrotors rotorsas asfor for15,000 15,000lblbelectric electric T&S motorarmatures armaturesand andGM GMlocomotive locomotivecrankshafts crankshaftsthat thatare aretwenty twentyfeet feetlong. long. motor Eventhose thoseextremely extremelylarge largeparts partshave haveonly onlyaasix sixsecond secondsample sampletime! time! Even T&Sdoes doesnot notjust justoffer offeran anattachment attachmentto todrill drillfor forheavy heavymetal, metal,we webuild build T&S theheavy heavymetal metalstand standinto intothe thebase baseof ofthe themachine. machine.We Weknew knewwe wewere were the goingto tobalance balancecrankshafts crankshaftswhen whenwe webuilt builtititso sowe weheld heldaacrankshaft crankshaft going upininthe theair airand andbuilt builtthe theultimate ultimatemachine machinearound aroundit.it. We Weinclude include up allnecessary necessaryaccessories accessorieswith withthe themachine. machine. And Andwe wedo dothis thisall all all forless lessthan thanany anyof ofour ourcompetitors. competitors.As Asan anadded addedbonus bonusour our for PB500has hasthe thesmallest smallestfootprint footprintof ofany anymachine machineininthe the PB500 industry,AND ANDthe themachine machineisismanufactured manufacturedright righthere hereinin industry, theRepublic Republicof ofTexas! Texas! the

Allaccessories accessoriesavailable available All

Havean anolder oldermachine? machine?Call Callus usfor foraaquote quoteon onan anupgrade!! upgrade!! Have 27 trader-mag.com trader-mag.com Summer Winter 2020 2021 TTRADER RADERM MAGAZINE AGAZINE 19


591 West Apollo Street • Brea, CA 92821 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

28

TRADER MAGAZINE Summer 2021 trader-mag.com


COBRA STAGE I SODA BLAST CABINET

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com Summer 2021 TRADER MAGAZINE

29


Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing. Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments. Works great will all degree wheels through 16” or larger depending on the mounting hole.

3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ----------- $495

18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings. Part #ST-DegreeWheel-18 -------------------- $225.00 Pointer ------------------------------------------$60.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

30

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

31


PowerPeen Direct Pressure Blast Cabinet Optional Mobile Work Cart shown with Polyethylene Turntable, Outside Tracks and Door Modification Optional Rubber Cabinet Liners, Operator Platform with Double Steps.

The ABS Products PowerPeen Direct Pressure Blast Cabinet comes in many different cabinets sizes including 60x60x48H model, choose the one right for your application. If you need a Direct Pressure for Plastic, Glass Beads, Aluminum Oxide, Steel Shot/Grit or any abrasive type between 20 to 120 mesh the Power Peen is the right machine for the job saving dollars on the purchase. It includes a long list of standard features and access to a longer list, almost eighty, of optional features to make blasting the part and machine maintenance easy and simple. Patented Separator Reclaimer sends the spent abrasive and dust into the 220 sq.ft. cartridge dust collector complete with hopper dust storage and pneumatic vibrator cleaning cycle. Advanced LED lighting, window sweep, ASME Coded 1.0 cubic foot pressure pot, MERV tested filter cartridge, operator platform and heavy duty bar work grates and more are all included. Add an optional Mobile Work Cart making quick work of loading hard to handle large parts. Call for added information on the machine and options. 714-671-0728

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 32

TRADER MAGAZINE Summer 2021 trader-mag.com

Power Peen Direct Pressure Included Standard Features • 13” x 24” window with protector • Window sweep • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • LED advanced lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning vibrator • HD bar work grates • MERV tested cartridge, 220 sq.ft. • Dust storage hopper, 1-1/2 c.f. • 1.0 c.f. pot capacity • Operator platform included • Boron Carbide Nozzle


Get Clean Parts

Fast!

The

*Agitation & Filtration

Block & Head Cleaners

*65 Gallon (246 L) Capacity! *32.75” Tank Length

Ultra 3200FA

*Lift Table with Agitation & Filtration *210 Gallon (795 L) Capacity!

Ultra 6000FLT

*61” Tank Length

STANDARD FEATURES

*Digital Touch Controls *Dual Filtration System with Weir Tank *Opposing Horizontal Transducer Cleaner *Ultrasonic Clean from TWO Directions *7 Day Heat Timer *Insulated Tank and Lid *Stainless steel construction *Movable Basket *Automatic Cycles!

Ultrasonicllc.com 513-502-9746

CINCINNATI, OH youtube.com/ultrasonicllc Info@ultrasonicllc.com trader-mag.com Summer 2021 TRADER MAGAZINE

33


Pollution Control Workstations

$7,900

.00

Pollution Control Workstations PCE-4736

47˝ W x 36˝ D, 440 sq. in. filter, removable dust pan, fiberglass grate, plexiglas enclosed top that swings up out of the way for loading, swings down to keep particles out of shop, single motor on the back 3/4 HP @ 750 cfm. Move up to 2HP, 1100 cfm blower.

Upgrade from ABS-4228, this is the latest pollution control workstation from ABS Products. This machine is a must in today’s market where you are working with plastic, fiberglass and carbon fiber that you have to keep out of your lungs.

See More Pollution Control Workstations and many other products: www.youtube.com/absproducts

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com 34

TRADER MAGAZINE Summer 2021 trader-mag.com


Original Serdi Tooling Largest Selec�on of Cu�er Bits and Blank Sizes Industry’s Best Premium Micro-grain Carbide

New Genera�on Heavy Duty “Flat Top” Style Tooling Larger blanks ¨ More re-sharps ¨ Lower Cu�ng Forces ¨ Longer Life Posi�ve & Nega�ve Geometry ¨

¨

Posi�ve Geometry for Hard Seat Materials

Single Angle Indexable “Tri-Tools”

The Serdi Legacy! Machines & Tooling

trader-mag.com Summer 2021 TRADER MAGAZINE

35


Update your Piston Ring Grinder to an ABS Ring Grinder!

START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs. We have what you need for any type of ring! Complete with Micron Disk Micron Disk, 1 - 4” Turntable ---$1,455.00 Micron Disk, 1 - 5” Turntable ---$1,555.00 Micron Disk, 1 - 6” Turntable ---$1,655.00 Diamond or Borzon Disk ----------$325.00

New Scotch Brite Buffing Wheel RG-5953 -----$10.50 ea. New Felt Buffing/Deburring Wheel RG-5952 ---$14.75 ea. New Stick-On Disks RG-5956 --------------10 for $50.00 12 pack of Micron Disks --------------------------$19.25 50 pack of Micron Disks --------------------------$65.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

36

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

37


THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized & your stock safely stored!

CH-1 Crank Rack

CH-1 Crank Rack with optional top, V-blocks and one cam hanger.

CH-2 Double Crank Rack

CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level. Each level holds between 20-24 cranks depending upon the model.

ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)................................... $149.00

Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory. This is a rack for every crank.

SAVE MONEY AND FLOOR SPACE!

2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack

591 West Apollo Street • Brea, CA 92821 phone 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

38

TRADER MAGAZINE Summer 2021 trader-mag.com

System on Best Storage the market!


Can Be Arbors perately! Se Bought

Mill Mounted Drilling Platform

ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)

ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments

Drilling Platforms for Hines & Winona Balancers

$149.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

ABS-Products.com Call 714-671-0728

Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert. Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.) CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack. CR-ES-3 ............................................................................. $95.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.

Tools, Equipment, Machines for Engine Builders & Rebuilders trader-mag.com Summer 2021 TRADER MAGAZINE

39


3030 PowerPeen Industrial Direct Pressure Each abrasive delivery method (siphon and direct pressure) has its own “best applications” just like engines open to atmosphere and engines using boost to overcome one atmosphere. Each model also has its best application for the cabinet size; one size does not fit all! The PowerPeen 3030 is the smallest cabinet size in a seven cabinet lineup. The 3030 is a compact size with all the features included making it an Industrial Direct Pressure Cabinet in a smaller package. Use for shot peening quick replacement parts or use for glass bead, plastic and all the other media types.

Standard Features • 13” x 24” window with protector • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • Advanced LED lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning • Bar work grates • MERV tested cartridge, 220 sq.ft. • Dust storage hopper, 1-1/2 c.f. • 1.0 c.f. pot capacity, Charger model • Operator platform Included • Boron Carbide Nozzles

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 40

TRADER MAGAZINE Summer 2021 trader-mag.com


5.0 CRANK&CAM POLISHER

Over 50 years of polisher manufacturing experience and we never stop improving our products. Our new 5.0 versions make cleaning and micro polishing crankshafts, camshafts and rack & pinion shafts fast and easy. With variable speed control, spring loaded polishing belt arm for quick and easy belt changes, heavy duty, long lasting frame and components.

////////////////////////////////////////////////////// Please contact us for a spec sheet and pricing.

Many types of shafts and cylinders can also be polished on our machines. Standard sizes are 32”, 42” and 48” centers. Custom sizes also available upon request. /////////////////////////////////////////////// Crankshaft Polisher (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Camshaft Polisher 41


The Hurricane Wet Blast Machine, For A Finer Finish Media Blast manufactures more than 170 standard models and sizes of blasting cabinets with over 80 optional features for increased productivity, durability, and operator safety. Our extensive line of Wet, Dry, Siphon and Direct Pressure blast cabinet models includes specialty machines for automotive, aerospace, military, precision focused micro blasting, plastic stripping, soda blasting, tumble part processing and shot peening. Cartridge dust collectors, HEPA after filters and separate standing timed reverse pulse cleaning dust collectors are included as standard sandblasting equipment or available option upgrades. The Hurricane Wet Blaster has many applications in the automotive field to include 3-D printing, processing wheels, chemically clean part surface, zero abrasive embedment and the elimination of frictional heat capable of damage and part distortion.

Standard Features • Stainless Steel Cabinet • Seal-less Slurry Pump • 25 to 28 % Abrasive Suspension for faster processing • Negative Pressure Cabinet with Mist Collector Blower and Filter • LED Cabinet Lighting • Positive Locking Window Seal

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 42

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

43


ALL NEW, Pro G/S The Pro G/S is a more compact cabinet using smaller amounts of compressed air designed for shops with limited floor space and smaller part volumes. The Pro G/S was designed specifically for use with Grit and Shot or combinations of the two. Applications Finishes and Camouflage Repairs. The included casters allow the machine to be rolled into position,used, and then moved to a stored location.

Attached Dust Collector

FEATURES & BENEFITS • Duplicates Original Factory Finishes • Camouflage Surface Repairs • Reaches Down Into Deep Cylinder Ports • Compact Footprint with Casters • Negative Pressure 100% Welded Dust Collector • 90 sq. ft cartridge filtration • Semi-Automatic Dust Collector Vibrator Cleaning Cycle • Advanced LED Lighting • ASME Coded Pressure Pot with Access Port • LG. 13X24” view window

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 44

TRADER MAGAZINE Summer 2021 trader-mag.com


BY ABS

Built for PERFECTION E n g i n e B u i ld i n g To o l s

Piston Deck Height Bridge

Piston Ring Squaring Tool

Check the piston height easily, adjustable mounts move to fit any size bore, adjustable gauge mount to zero the gauge where you want. A must have tool when calculating piston deck clearance. Includes gauge and can also be used to measure flywheel step height.

Fast, easy and repeatable fixture for squaring rings in the bore prior to setting end gaps. Two sizes, RG-RST covers bores from 2.000” to 5.000” and RG-RST-D covers bores 5.000” to 8.000”. Places rings 1.000” below the deck to get past head bolt distortion. Longer (3”) legs available if desired. • No wrenches required • Change bore sizes in seconds!

Precision V-Blocks 714.671.0728 abs-products.com sales@abs-products.com youtube.com/absproducts

For precision keyway milling and cross drilling cranks. Consists of V-Blocks, hold down bars, nuts, T-nuts and locators. Fits most milling machines.

trader-mag.com Summer 2021 TRADER MAGAZINE

45


Shop Equipment for Sale:

Employment Opportunity

Sunnen VGS20C seat and guide machine.................. $12,000 Van Norman MG3000 surfacer.................................... $9,000 Peterson 50F dryrock surface grinder......................... $1,000 Van Norman 400 crankshaft grinder updated w/ 438 head and tailstock, scraped, aligned.................................... $8,800 KwikWay seat grinder - VS Valve grinder set............... $1000 Quincy 7.5 compressor................................................ $1,700 (2) CRG-500 cap grinders.......................................$500 each Sunnen rod hones with cap cutters

Seeking a highly motivated Sales/Customer service person. Automotive/Engine knowledge is preferred but not required. Salary commensurate with experience. Located in beautiful Southern California. Please send resume or inquiries to:

Ferndale, Michigan Adney Brown 586-549-7557 ______________________________________________

For Sale in Springfield, Oregon: Retiring... Selling all my machine shop equipment, separately or as a package with my building. Contact jeffcaldwell@aol.com

dave@abs-products.com _______________________________________________

Custom Steel Boxes We make standard and custom Hand Held Tool Boxes, Metal Cases, Totes, Courier Boxes, Lock Boxes, Cantilever Boxes, Garage and Shop Organizers. Contact us to see how we can help you with your steel box needs. Don’t forget to ask about our inventory of seconds and overstock. All made right here in America. PioneerSteelUSA.com 714 255-0526

Advertise now in the Trader Classifieds Call: 714/ 671-0217

46

TRADER MAGAZINE Summer 2021 trader-mag.com

www.trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

47


Factory Authorized SERDI Service All Serdi Machines

1625 North Milford Road Highland Michigan Russ at RT Sales | Phone: 248-887-0422 rtsales@rtsalesinc.com

rtsalesinc.com

DON'T MISS OUT, CALL US TODAY FOR OUR 2021, 3 ISSUE SPECIAL.

With the US starting to open up again, there has never been a more crucial time to advertise. Keep your business in front of your customers and potential customers with affordable, affective advertising in the Trader Magazine. We have three more issues available this year Summer, Fall and of course our Winter/PRI issue that is distributed at the PRI Show as well as mailed to over 16,000 businesses.

48

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE 49


N-200 Stage II Soda Blaster Using GhostFlow™ Technology

STANDARD MACHINE FEATURES • Three (3) Cabinet Sizes • 36x36, 48x36 & 48x48 (w x d) • 13” x 24” ClearView™ Window • Easy Clean MERV Tested Cartridge Filter • Pneumatic Vibrator Dust Collector Cleaning Cycle • Reverse Pulse Dust Collector Cleaning Cycle • 700 CFM Blower w/ Silencer • Easy to use Soda Pressure Generator with Control Panel • ASME Code 0.8 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 9 to 22 CFM Soda Nozzle • Large Side Access Door • Pneumatic Soda Feed System

The N-200 Stage II Soda Blasting Cabinet is one of the most popular of the NEW Soda Models using larger cabinets and larger dust collector sizes. This allows the user to operate longer hours and access other part handling options important to soda blasting applications. This is a great choice for cleaning many automotive parts like automotive heads when you want the original finish and a soluble abrasive to eliminate any abrasive residuals. The Patented Separator Reclaimer prevents 95% of the used soda from transferring into the dust collector. This unique design allows longer daily machine operation and more daily part production. Downdraft Cabinet Airflow using GhostFlow™ Soda Delivery Technology and Used Soda Dropout are what make ABS Products the leaders in soda cabinet technology. (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

50

TRADER MAGAZINE Summer 2021 trader-mag.com


Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head! 1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 5. Easy 6. Profitable

714-671-0728 abs-products.com

RPM

Equipment Sales Jupiter Florida

Provider of High quality new & used engine rebuilding equipment and engine parts

VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00

VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 VT-2500-4500-F 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting ............$21.80 VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting ......................$21.80 VT-3000-4000 3”x 3” pad without fitting ......................$21.80 VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 VT-3000-4000 3”x 4” pad without fitting ......................$22.80 VT-6000-6000 6”x 6” pad without fitting ......................$24.95 VT-3-TP 11”x 35” table pad for VT-3 ...................$62.95 VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 VT-SP-14 14 mm spark plug adapter ....................$39.00 VT-SP-18 18 mm spark plug adapter ....................$49.00 VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 GA-LG Liquid filled gauge .................................$80.00 VT-3-H 1/4” vacuum hose ..................................$39.00 VT-RV Release valve ..........................................$42.00 VT-TA Table adapter .........................................$10.00 VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 VT-3-P 3 CFM pump .........................................................$328.98 VT-5-P 5 CFM pump ........................................$475.00

Ralph Nettles

ralphnettles@msn.com

561-906-2827

Warehouse Location 380 NW 144th Drive Okeechobee Fl. 34972

rpmequipmentsales.com trader-mag.com Summer 2021 TRADER MAGAZINE

51


FOR TOUGH PARTS CLEANING JOBS Automotive parts come in all shapes and sizes. Blackstone-NEY Ultrasonics solutions deliver more parts cleaning speed, power and ease of use:

AGI-SONIC™ n

n

n

n

Combines Ultrasonics and agitation for powerful cleaning. For parts up to 39" x 30" x 17" and 500 lbs. 3,000-5,000 watts of ultrasonic power. Self-contained pumps, filter, heat and tank.

GMC n

n

n

n

Self-contained, portable, high density ultrasonics; move where needed for in-place or utility cleaning. For parts up to 35" x 21" x 12" and 125 lbs. User-friendly, digital controls with readout for heat, pump and ultrasonics. Drain one batch while simultaneously cleaning another.

ctgclean.com | 800.766.6606 | info@ctgclean.com 52

TRADER MAGAZINE Summer 2021 trader-mag.com


Metal Polishing • Cylinder Head Resurfacing • Grinding • Deburring • Finishing • Snagging • Sharpening • You Name It

Belts Made to Order Whatever Your Application! Choose from Aluminum-Oxide, Ceramic, Silicon-Carbide & Zirconia-Alumina (with or without Grind-Aid Lube) • Widths up to 15" • Lengths up to 520" • Common sizes available online or by phone

Need something special? Call 800-433-8010 or 507-858-0200 for a quick quote! Quantity Discounts Available Winona, MN - USA

Fast Turnaround! From order to shipping in 3 to 5 working days!

1-800-433-8010 | www.abrasiveindustrialsupplies.com trader-mag.com Summer 2021 TRADER MAGAZINE

53


EASY REFERENCE BALANCING CHARTS HEAVY METAL BALANCING WEIGHT GAIN CHART DIA. X LENGTH

54

CONVERSION CHART OUNCES TO GRAMS

TUNGSTEN

STEEL

NET GAIN

7/16" x .875" 1/2" x .750"

38 43

17 19

1/2" x 1.000" 1/2" x 1.200"

57 65

1/2" x 1.250" 5/8" x 1.000"

OZ

GRAMS

21 24

1/16

=

1.77

1/8

=

3.54

25 30

32 35

3/16 1/4

= =

5.31 7.08

72 91

31 39

41 52

5/16 3/8

= =

8.85 10.62

5/8" x 1.200"

109

47

62

5/8" x 1.250"

114

49

65

3/4" x 1.000"

122

56

66

3/4" x 1.200" 3/4" x 1.250" 7/8" x 0.500" 7/8" x 0.700" 7/8" x 0.750"

147 162 87 117 127

67 70 38 54 58

80 92 49 63 69

7/16 1/2 9/16 5/8 11/16

= = = = =

12.39 14.16 15.63 17.70 19.47

7/8" x 1.000" 7/8" x 1.100"

169 186

77 85

92 101

7/8" x 1.200"

198

92

106

7/8" x 1.250"

210

96

114

1" x 0.500"

111

50

1" x 0.700"

153

70

1" x 0.750" 1" x 0.850"

164 190

1" x 1.000"

3/4

=

21.24

13/16

=

23.04

7/8

=

24.78

61

15/16 1 2 3 4

= = = = =

26.55 28.35 56.70 85.05 113.40

83

5

=

141.75

75 85

89 105

6

=

170.10

227

100

127

1" x 1.100"

243

110

133

1" x 1.200"

265

120

145

1" x 1.250"

275

125

150

1-1/8" x 1.000"

282

127

155

1-1/8" x 1.200"

325

153

172

1-1/8" x 1.250"

350

160

190

1-1/4" x 1.000"

346

157

189

7 8 9 10 11 12 13 14 15

= = = = = = = = =

198.45 226.80 255.15 283.50 311.85 340.20 368.55 396.90 425.25

1-1/4" x 1.200"

418

189

229

16

=

453.60

1-1/4" x 1.250"

445

196

249

1-3/8" x 0.750"

328

142

186

1-3/8" x 1.250"

543

237

306

1-1/2" x .600"

304

135

169

1-1/2" x 1.000"

504

226

278

1-1/2" x 1.250"

635

283

352

TRADER MAGAZINE Summer 2021 trader-mag.com

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts


Mention This Ad For A Special Discount

Balancing Slugs, Pins, Plates & Bars

Our heavy metal arrives finished, ready to install, oversized by .002-.003 for a precise press fit. We have the best quality, largest inventory and over 30 years experiences with heavy metal for crankshaft and chassis balancing.

Contact our sales team today! (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

• Hundreds of sizes in stock • Custom sizes available upon request • We can cut weld chamfers on any order trader-mag.com Summer 2021 TRADER MAGAZINE

55


Heavy Metal Checking Weights lf you’re tired of the guess work involved when balancing with heavy metal you need heavy Metal tungsten checking weights! Quickly and accurately establish the exact location and amount of heavy metal needed prior to drilling. our check ing weights fit securely between crankshaft counterweights al lowing the exact simulation of heavy metal. get it right the first time everytime! available in 1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4” and 1-3/8” diameters in simulated lengths of 1.200” *made from steel

Part Number Item Description Price CW-100 Checking Weights - 1” Heavy Metal gms ................................................................................................................... 50.00 CW-1125 Checking Weights - 1-1/8” Heavy Metal....................................................................................................................... 60.00 CW-1250 Checking Weights - 1-1/4” Heavy Metal....................................................................................................................... 70.00 CW-1375-1250 Checking Weights - 1-3/8” Heavy Metal for 1.250” long pieces................................................................................... 80.00 CW-1375-750 Checking Weights - 1-3/8” Heavy Metal for .750” long pieces .................................................................................. 80.00 CW-500 Checking Weights - 1/2” Heavy Metal .......................................................................................................................... 30.00 CW-625 Checking Weights - 5/8” Heavy Metal .......................................................................................................................... 35.00 CW-750 Checking Weight - 3/4” Heavy Metal ............................................................................................................................ 40.00 CW-875 Checking Weights - 7/8” Heavy Metal .......................................................................................................................... 45.00 CW-PB Poor Boy Checking Weights - Coupler with bolt - Add Balancing Clay to make any size Chking Wt.................... 7.00

R8 Collet required for straight shanks: 7/16”, 9/16”, 5/8”, 3/4”, 7/8” $125.00 Morse Taper version available for same price

Heavy Metal Start-Up Kit “Get Started Installing and Balancing with Heavy Metal” Getting starled on anything is usually the hardest part, but with the Heavy Metal Start Up Kit you’ll be installing and balancing with heavy metal in no time. We’ve included all the necessary drills and reamers needed for the installation plus enough Heavy Metal for several balance jobs. And just so we could assist you in those balance jobs, we went ahead and included 20 Heavy Metal Checking Weights. These checking weights will enable you to accurately determine the precise amount and location (prior to drilling) where Heavy Metal is needed. Heavy Metal Start-Up Kit comes with: (10) 1” x 1.200” pieces of heavy metal and (8) checking weights (10) 7/8” x 1.200” pieces of heavy metal and (8) checking weights (10) 3/4” x 1.200” pieces of heavy metal and (2) checking weights (5) 5/8” x 1.200” pieces of heavy metal and (2) checking weights (10) 1/2” x 1.200” pieces of heavy metal and (2) checking weights (2) 7/16” x 7/8” heavy metal dowel pins for Chevrolet (1) Drill bit in each of the following sizes: 31/32”, 27/32”, 23/32”, 19/32”, 15/32” (1) Reamer in each of the following sizes: 1”, 7/8”, 3/4”, 5/8”, 1/2” *specify straight shank or Morse taper when ordering Optional 3/4” straight shank to #3 Morse taper and adapter add $59.00

56

TRADER MAGAZINE Summer 2021 trader-mag.com

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts


trader-mag.com Summer 2021 TRADER MAGAZINE

57


Blizzard Stage III Soda Blaster Using GhostFlow™ Technology

Production applications are what the Blizzard Stage III was designed for, if you have multiple daily shifts we offer dust collector upgrades to 880 sq.ft. with automatic timed reverse pulse cleaning that includes manual over-ride controls. Clean any part down to the original finish and do it with a water soluble abrasive to eliminate any abrasive residuals and know the part has been unchanged. 95% of the used soda is collected outside the cabinet preventing it from entering the advanced easy clean dust collector with Automatic Timed Reverse Pulse Cleaning Cycle. The Blizzard also includes manual pulse over-ride controls for added cleaning. The Pneumatic Vibratory Cleaning Cycle is also standard allowing the user up to four ways to clean the dust collector to make sure it’s always clean.

STANDARD MACHINE FEATURES

• Four (4) Standard Cabinet Sizes 36x36, 48x36, 48x48 & 6060 (w x d) • 13” x 24” ClearView™ Window with Window Sweep • Easy Clean MERV Tested Cartridge Filters • Auto/Timed Reverse Pulse Dust Collector Cleaning Cycle with manual over-ride controls • Pneumatic Vibrator Dust Collector Cleaning Cycle • Magnahelic Monitor Gauge • 1100 CFM Blower w/ Silencer • Pneumatic Conveyor with 95% Used Soda Collection before the dust collector • Easy to use Soda Pressure Generator • ASME Code 1.0 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 10 to 22 CFM Soda Nozzles • Ergo Flexible Abrasive Hose • Pneumatic Vibrator Soda Feed System

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

58

TRADER MAGAZINE Summer 2021 trader-mag.com


Is Non-Destructive Cleaning Critical?

Remanufacturing Starts with ARMEX The first step in remanufacturing and rebuilding of engines, transmissions and other components is cleaning. ARMEX has answered the problem of ineffective and time-consuming cleaning processes by launching Re-Man XL, the first abrasive blasting media specifically formulated for the transportation remanufacturing and rebuilding industry. Hard to clean contaminants are no match for Re-Man XL. With its extraordinary ability to quickly eliminate grease and oils plus the power to remove burnt-on carbon, light rust, gasket materials, coatings and grime all in one-step. Furthermore, Re-Man XL will never damage what you are cleaning, reducing rejected cores and components. If you want to improve your cleaning processes all while saving time and resources Re-Man XL is the only choice.

Before

After

Before

After

ARMEX, the Original Baking Soda Abrasive

Learn more at www.armex

ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc. Pantone 2758 C

trader-mag.com Summer 2021 TRADER MAGAZINE

59


60

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

61


62

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

63


64

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

65


66

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

67


68

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE 69


Get Abrasive! ABS Blasting Media Abrasives for all Applications.

Cleaning parts, removing paint, powder coating, surface blending or surface preparation, ABS has the right type of blasting media for all your needs. We keep a wide variety of types and sizes in stock. Give us a call to discuss which abrasive will work best with your application and machine. BAKING SODA PLASTIC MEDIA

STEEL GRIT

ALUMINUM OXIDE

STEEL SHOT

70

(714)671-0728 ABS-Products.com info@ abs-products.com youtube.com/absproducts sales@abs-products.com

GLASS BEADS


HIGH PERFORMANCE OFF-ROAD ENGINE BUILDER. HOME OF ULTRA-4, SCORE, AND BEST IN THE DESERT NATIONAL CHAMPIONS. VISIT OUR WEBSITE TO START YOUR ENGINE PROGRAM UTILIZING STATE OF THE ART EQUIPMENT FROM MANUFACTURES SUCH AS: ROTTLER, , NEWEN, SERDI, HINES, ABS PRODUCTS, AND MORE. CHECK US OUT ON INSAGRAM @jeffginterracingengines

trader-mag.com Summer 2021 TRADER MAGAZINE

71


Handheld Polisher A Must Have!

This is a must have polisher for machine shops, motor rebuilders, hydraulic rebuilders, motor and engine repair shops. Makes polishing your crank, cam and rack & pinion shafts simple, easy and cost effective. Comes with premium Baldor motor for long life, Reinforced aluminum frame for ease of operation, Long Lasting Ball Bearing rollers which accommodate ¾” to 2” wide belts. Available in 64” or 72” models.

Contact our sales team today! (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

72

TRADER MAGAZINE Summer 2021 trader-mag.com


trader-mag.com Summer 2021 TRADER MAGAZINE

73


Simple. Fast. Competitive. Rottler’s Cylinder Head Machining Equipment is so advanced that even the most complex operations can be programmed and executed quickly, accurately and reliably. For surfacing, seat and guide installation and cutting and valve refacing procedures, only Rottler has the cutting edge you need to maximize performance and profitability.

Rottler’s surfacing machines are the fastest machine for surfacing heads, blocks and manifolds. Designed with the latest CNC technology and proven designs found in Rottler CNC machining centers! Handles the smallest parts to large diesel cylinder heads.

Rottler MANUALMATIC control has revolutionized valve seat cutting! During seat cutting, the operator does not have to operate any buttons, switches or pedals, simply turn the spindle feed handwheel up and down and the MANUALMATIC control takes care of all the functions

THE CUTTING EDGE 74

TRADER MAGAZINE Summer 2021 trader-mag.com

Rottler's centerless grinding valve refacing machine is designed to grind a set of valves to equal length from stem/butt end to valve seat. The Rottler Centerless System allows a wide range of valve stem diameters to be ground without changing any collets or chucks.

8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc


3 YEAR WARRANTY GUARANTEED PRODUCTIVITY

CNC AUTOMATIC HONING

Special optional software packages allow: VARIABLE SURFACE FINISH from top ring area and lower bore area. Precision honing of “THIN WALL” cylinders such as CGI Engine Blocks and Motorcycle Cylinders. • Completely Unattended Automatic Hole-to-Hole Operation • Crash Protection prevents damage to tooling • Ease of programming – only 3 screens for a new block • Accuracy of size and surface finish including Rk parameters • Ease of Maintenance – roll out coolant tank with 3 stage magnetic filtering • Dual Stage and Multi Stone Holder Hone Heads available • Quick Change Hone Head System • Quick Size Calibration System • Reverse Rotation allows perfection of Surface Finish Today’s high performance piston rings require precise surface finishes, for reduced friction and a perfect seal. Rk, Rpk & Rvk parameters are the latest in measuring technology to achieve the results necessary for today’s high performance rings. The Rottler CNC Honing Machines utilize advanced CNC control and super abrasives to give the cylinder bore surface finish results that we require – every time! Rottler Honing Expertise is up to date with the latest technology, and they are always there to help with questions – fast!!

Used by Professionals such as RoushYates NASCAR and BES Racing to save time and improve bore finish.

– Keith Jones Total Seal Piston Rings Phoenix, Arizona

THE CUTTING EDGE 8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc

1-800-452-0534 www.rottlermfg.com 75


RACE TO WIN WITH ROTTLER FAST. ACCURATE. EASY TO RUN.

LESS TIME PROGRAMMING. MORE TIME WINNING.

EM69P

ROTTLER MFG.COM 76

TRADER MAGAZINE Summer 2021 trader-mag.com

1-800- 452-0534

Profile for Trader Magazine

Trader Magazine Summer Issue #158  

Advertisement
Advertisement

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded