a product message image
{' '} {' '}
Limited time offer
SAVE % on your upgrade

Page 1

www.newen.com • www.facebook.com/newenfixedturning

2020 NEWEN FIXED-TURNING® VISION SERIES ARE HERE, GO FOR IT!


2

TRADER MAGAZINE Spring 2020 trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

3


FARRIS EQUIPMENT SALES, INC. “Specializing in Late Model and Used Engine Rebuilding Equipment” Lubbock, TX (806) 762-0887 (800) 882-1808 CYLINDER BORING MILLS & BARS: Berco #AC-650M Bore/Surf Mill Rottler #F2B & #F4B Bore Systems NEW Kwik-Way #FL Portable Bar Kwik-Way #FL, #FN, #FW, #FW-VW, & #FWS bars Kwik-Way #FL & #FN Overbore Kits Kwik-Way #054 & #1291 Boring Stands VALVE GUIDE & SEAT EQUIPMENT: Serdi #100 (recently rebuilt) Sunnen #VGS-20C Winona #PH-2000 & #PH-2000L Peterson #TCM-25 Kwik-Way #041 & #019 HEAD & BLOCK MILL/SURFACERS/FIXTURES: Comec #Auto 1330 CBN Head/Block Mill Storm #85B Head/Block Mill Winfield #DSF-2000 Head/Block Fixture Comec #SPN-800 Belt Surfacer w/Stand Peterson #50 Surfacer – Recond.

SUNNEN HONING EQUIPMENT & RELATED: #CV-616 Hones (rebuilt & good cond.) #CH-100 Line Hone (rebuilt & good cond.) #LBB-1810 Power-Stroked, #LBB-1699, #LBB-1499, & #MBB-1660 Rod Hones & Shop #CRG-750 & #CG-8400 Cap Grinders Large #CR Mandrels from 2.9” to 4.5” Large #Y104-6562 Special Aluminum mandrel Large Line Hone Mandrels from 4.0” to 5.0” #8RY-2400 Line Hone Mandrel (8 stone) #CRH-50 Rod Heaters (recond & good cond) #BP-10 Piston Pin Press LINE BORE EQUIPMENT: Tobin-Arp #TA-15 Flat Top Machine Sunnen #PLB-100 Portable Kit (We need some nice line bores) CRANKSHAFT GRINDERS & RELATED: Berco #RTM-351A Grinder –Rebuilt (in Ohio) Scledum #RG-270 Grinder (74” cap) Robbi #RMC -1500 Grinder (60” cap)

MISCELLANEOUS: Winona #XL-2000 computer balancer; ABS Soda Blaster; Kans. Inst. #AB502 shotblaster: Kans. Inst. #ALOV-89 Head Oven; Kans. Inst. #BK-17 Oven; NEW Kwik-Way #016 Valve Refacer; Berco #RAC-1500 Camgrinder; and other equipment too numerous to mention. OUR INVENTORY CHANGES WEEKLY! Check our website for most current listing. EQUIPMENT NEEDED: Later model CBN Surfacers; Sunnen #CK-10 cylinder hones in good condition, Serdi, Rottler & Sunnen Seat/Guide Machines; Nice line bore machines; Berco #AB651 rod bore; AXE head pressure testers; DCM, Van Norman, & Winona Flywheel Grinders; Storm Kotifin Crankshaft Polisher; Sunnen #VR7000 or 8000 Valve Refacers: Sunnen #CHW-40 Work Stations; and any other equipment we can make money on. WE ARE LOOKING FOR LATER MODEL, NICER EQUIPMENT. If I can’t buy it, I will try to broker it for you! Send photos or what you wish to sell to. sam@farrisequipment.com

www.farrisequipment.com E-mail: Sam@farrisequipment.com

SAM FARRIS

Sam is ready to make some deals! 4

TRADER MAGAZINE Spring 2020 trader-mag.com


Prices subject to change. Please call for updated information trader-mag.com Spring 2020 TRADER MAGAZINE

5


ABS Products “IT’S IN THERE”

Quality Cutter Grinding 15

Access Industries 5

Rad Industries 63

AERA 26

Rettig Bros., Inc. 52

Air & Power Tools 22

Revco Precision 22

American Gasket 41

ROBINS SEAT and Guide 22, 77

ArmaKleen 52

Rottler 78-80

Armex 75

RPM Equipment Sales 55

Baker Equipment Sales 24,56

RT Sales 29

Business Card Marketplace 22

SBI 28

Classifieds 50

Serdi 73

Clay Smith 63

Scholler Shop Equipment 32-33

Coder 25

T & S Machine 17-21

CWT Industries 2-3

Turner Technology 14

Dakota Parts 24

Ultrasonic 37

Delta Custom Tools 10

Winona Van Norman 66-71

Energy Suspension 15

EPWI 7 Farris Equipment 4 Ferrea Valves 24 Innovative Machine 35 Irontite 47 Jack Scholler Shop Equipment 32-33 Jamison Equipment 13 Jeff Ginter Racing Engines 36 K & S Regrinding 24 Kwikway 47 Media Blast & Abrasive 44,46 Mickey Thompson 62 Newen 1,9 PRI 39

Ad Rates/Specifications 51


ENGINE & PERFORMANCE WAREHOUSE Inc.

Online and On Your Side!

E V ’ WE OU Y T GO ERED ! COV

EPWI is always striving to help YOU the customer spend more time building and less time looking for parts! That’s why we created our B to B only website. Giving you complete capability, stock check, pricing, quotes, and invoice retrieval.

Need to price out a KIT? Want to upgrade to more Performance? The Kit Wizard is your answer! Our Engine Kit Wizard is the best in the business, allowing you to make substitutions and deletes. We strive to make sure you get the job done fast with no hassels… and also try to give you the best margin we can.

Come check us out at EPWI.net

www.EPWI.net

Memphis (866) 917-4728

Albuquerque {877} 767-0100

Anchorage (800) 288-5573

Denver (800) 888-8970

Tacoma (800) 876-5152

Oklahoma City (800) 937-3652

Portland (800) 876-5152

Anaheim (800) 634-0969

Dallas (800) 284-5348

Houston (800) 288-6548

Oakland (800) 234-1410

Phoenix (888) 272-0191

San Antonio (800) 423-2707

trader-mag.com Spring 2020 TRADER MAGAZINE

7


8

TRADER MAGAZINE Spring 2020 trader-mag.com


We’ve Made Top Quality Affordable!™

at the forefront of technology!

• Order by 2 PM PST, We Ship Same Day! T +1-760-233-0067 E contact@newen.com

• 1-800-639-3693 trader-mag.com Spring 2020 TRADER MAGAZINE

9


10

TRADER MAGAZINE Spring 2020 trader-mag.com


591 West Apollo Street • Brea, CA 92821 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

trader-mag.com Spring 2020 TRADER MAGAZINE

11


The Charger Production Pressure Blast Machine uses a large 1.0 cubic foot capacity ASME Coded pressure pot to pneumatically push the abrasive to the part using the nozzle ID size and blasting pressure to determine the compressed air usage. Pressure Blasters require less cfm to create the same abrasive velocity during operation. Direct pressure machines produce faster abrasive particle velocity, higher abrasive grain density and greater abrasive frictional heat for heavy coating removal and cross-drill de-burring.

• Three (3) large cabinet sizes all with 36 inch inside height • All three (3) cabinet sizes offer the Space Saving Side Mounted Dust Collector • Operator Platform Included • Direct Pressure can do something siphon can’t….. creates the fastest abrasives velocity….creates the highest frictional heat….blast into blind holes and pneumatically pushes abrasive through cross drill holes. • Blast using light plastic abrasives or heavy steel shot, steel grits and all the other standard abrasives like glass beads, aluminum oxide, silicon carbide • LED Lighting • Boron Carbide Nozzle, • Large 24” ClearView Operator Window • Air Velocity Window Sweep for better visibility • Clean, Strip, Peen using all abrasive types • Also includes many more Standard Features not listed

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 12

Shown with optional Turntable


JAMISON: your best source for

Automotive Shop Equipment Storm Vulcan Scledum RT 17y CBN Resurfacer

Rottler F2b Airfloat Boring Bar

$8,495

$12,500

Peterson Comec 900MVA CBN Resurfacer

$13,450

Sunnen CV-616 Powerstoke Hone WITH LINEHONE

Comec RP900MVA CBN Resurfacer

$12,500

Rottler HP-3 Powerstroke Cylinder Hone

Delta Custom Tools

$19,950

$5,995

We are Authorized Dealers for the following lines of parts & equipment:

Look to AXE

PO Box 276 • 1908-11th Street, Emmetsburg, IA 50536 • Fax: 712-852-3570

800-841-5405

www.jamisonequipment.com trader-mag.com Spring 2020 TRADER MAGAZINE 13


14

TRADER MAGAZINE Spring 2020 trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

15


Automotive Production Dominator Siphon This 100% welded 12 and 14-gauge steel Production Siphon Blaster includes the patented bolt-on internal abrasive separator reclaimer and a long list of included standard features for use with any abrasive 0-150 mesh and gun sizes 25 to 90 cfm. Three standard cabinet models 3636, 4836 and 4848 all with 36” cabinet heights and side mounted dust collectors for space saving footprint.

• 13”X 24” Large view window • LED Lighting • 10” work ports • Fast Cleaning Siphon Delivery for easy operation and low maintenance • Gun Sizes to 90 cfm for highest frictional heat and fastest cleaning • Quickly remove rust….paint…. carbon….heat discoloration and more using high frictional heat to decrease cleaning time • Space Saving Side Mounted Dust Collector with 700 cfm blower • 220 sq’ MERV Tested Cartridge Filter • Many Part Handling Options Available • Optional HEPA After Filtration for Cell Machine Operations available • Pneumatic Dust Collector Cleaning • More Included Standard Features than any other manufacture of abrasive blasting cabinets in today’s market

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

16

TRADER MAGAZINE Spring 2020 trader-mag.com


T&S SELLS EFFICIENCY “How can I thrive in this business?”

The answer to this common is, “Take your best employee and make him more efficient.” Many times the most productive operator in your shop is yourself. If you can figure out how to duplicate yourself, your effort, your attention to detail, you will have mastered efficiency. But how do you actually accomplish that? The only way to make more money in the same amount of time is to get the work done faster. Even better is to automate so that while one machine is running other work is being performed. That’s efficiency!

PB500 Deluxe • Most sophisticated and sensitive system available • Finish correcting where you start

I can give a really good, artistic machinist the best Nicholson file (and we all know Nicholson is a great file!) and he MIGHT be able to surface a head flat and true with it and get the necessary surface finish…but he CANNOT make money doing it! Does that sound ridiculous? It should! Yet that is precisely how most shop owners have handicapped themselves. Many machinists feel that they can take the older, inefficient machines, and because they are really good at what they do, they can make them work sufficiently. And in many cases they can put out great work with them…but they can’t make great money with them. T&S sells efficiency. We have chosen to build machines that improve your work flow. We have focused on a few pieces of equipment, that if taken advantage of, should never cost you money (assuming your shop is busy). You get the work in the door and we will help you get it out!

• Deluxe model built specifically for crankshafts

BlockMaster • Probe, Bore & Deck in 20 minutes! • Probe every block, no saved programs • G-Code capable for production parts

940-668-1002 • 12 Whitleys Ridge Lane • Gainesville, TX 76240 • facebook.com/TnSMachinesAndTools 17


BLOCKMASTER CNC BLOCK MACHINING SYSTEM Probe, bore and deck a block in 20 minutes. While you are there clearance the block for stroker cranks. Since you just decked it, go ahead and O-Ring the deck since we have the operation saved. We are just as comfortable boring a V-8 and following it with a six-cylinder inline and then a V-6 60 degree with no saved programs or special setups. We have built and automated job shop block machining! Anyone with engine building knowledge can run the BlockMaster after a couple of days with the included factory training in your shop.

This is a couple of hours work on the BlockMaster 18

TRADER MAGAZINE Spring 2020 trader-mag.com

You can also make these with the BlockMaster!


PROBAL 500 DELUXE CRANKSHAFT BALANCER You might ask, “Maybe there is a ‘better’ system out there?”, we don’t believe so! T&S has invested heavily in building the quickest, most sensitive and accurate balancing software available. We can perform measurements in less than three seconds. We calculate drill depths, and when we tell you to drill in a particular location there is no chasing the angle back and forth. We have built-in reports showing the customer what the actual necessary tolerance for each crankshaft is and the actual balance achieved. A more sophisticated balancing software does not exist, and we can prove it. T&S uses the same system for balancing turbocharger rotors as for 15,000 lb electric motor armatures and GM locomotive crankshafts that are twenty feet long. Even those extremely large parts have only a six second sample time! T&S does not just offer an attachment to drill for heavy metal, we build the heavy metal stand into the base of the machine. We knew we were going to balance crankshafts when we built it so we held a crankshaft up in the air and built the ultimate machine around it. We include all necessary accessories with the machine. And we do this all for less than any of our competitors. As an added bonus our PB500 has the smallest footprint of any machine in the industry, AND the machine is manufactured right here in the Republic of Texas!

All accessories available

Have an older machine? Call us for a quote on an upgrade!! trader-mag.com Spring 2020 TRADER MAGAZINE

19


Call us Now!

BLOCKMASTER 5 AXIS PORTING FIXTURE

T&S Machines and Tools, Inc.

Finally an affordable 5 axis porting solution! Available as an add on for any T&S BlockMaster. Turn your machine into an all-in-one Block and Porting Machine! Take control of cylinder head port design in your own shop.

$155,000 package includes:

Ready to run programs for 2 Cylinder Heads (with fixtures) Lollipop tool w/shrink fit holder Chamfer Tool Engraving Tool (1) 1/2" EM Factory training at T&S Facility

20

TRADER MAGAZINE Spring 2020 trader-mag.com

940-668-1002


We use the latest Reverse-Engineering technology for digitizing your ports. Digitizing and programming can be provided as a service or get your own complete software and hardware package if you choose to bring the entire process in-house. Have your machine arrive in your facility ready to make chips!

T&S Machines and Tools, Inc. www.tnsmachines.com 940-668-1002

trader-mag.com Spring 2020 TRADER MAGAZINE

21


Seat Chuck

#1 (22 a 38mm) #2 (35 a 49mm) #0 (14 a 26mm)

New 14mm to 26mm seat chuck for turning the OD valves in motorcycles and cars. $195.00 for any size. Call 714-671-0728



ZK/E,Z ǀŜÄ?ĹśÄ?ϭώϯΛĹ?žĂĹ?ĹŻÍ˜Ä?Žž ͞ώϴϾͿĎŽĎ°ĎŽÍ˜ĎľĎ´ĎłĎ˛ ͞ϴϭϏͿĎľĎ´Ď˛Í˜ĎŻĎ­Ď°Ďł Đ˝ĎľĎ­Í˜ĎľĎľÍ˜Ď­ĎąĎąÍ˜Ď°Ď°Í˜ĎłĎłĎł Đ˝ĎľĎ­Í˜ĎľĎ´Í˜Ď­ĎąĎ­Í˜Ď˛ĎŹÍ˜Ď˛Ď˛ĎŻ Ç Ç Ç Í˜ZĹ˝Ä?Ĺ?ĹśĆ?Ď­ĎľĎ´ĎŻÍ˜Ä?Žž

Ď­ĎŽ^Ä‚ĹŻÄžĆ?ZĞƉĆ?ΘĎątÄ‚ĆŒÄžĹšĹ˝ĆľĆ?ÄžĹ?Ć?ĆšĆŒĹ?Ä?ĆľĆšĹ˝ĆŒĆ?/Ĺś &DSDFLW\ PPPP

&DSDFLW\ ´;´;´

&DSDFLW\ ´;´;´

&DSDFLW\ ´;´;´

6HHXVDW35,%227+

*See full advertisement on page 77

22

TRADER MAGAZINE Spring 2020 trader-mag.com


ABS 20 Ton Power Hydraulic Floor Shop Press Ideal for heavy metal installation, removing & installing bearings, bushings, balancers and more!

• Load capacity: 20 ton • Overall height: 61.5" • Table height is adjustable in 5" increments • Working Height 1” to 44.5” • Slide in Press Plate Included • Convenient foot operated air/hydraulic motor • Sliding head allows for offset pressing • Heavy-duty H-frame constructed of highgrade steel

Accessories Included

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 23


24

TRADER MAGAZINE Spring 2020 trader-mag.com


Bob Weight Cards - 100 cards per pad, perforated - Part# BW-5099C $30.00

trader-mag.com Spring 2020 TRADER MAGAZINE

25


hosted by SCAT ENTERPRISES Redondo Beach, California

hosted by HASTINgS PISTON RINgS hastings, Michigan

hosted by gOOdSON & SUNNEN Winona, Minnesota

hosted by ENgINE & PERFORMANCE wAREHOUSE Dallas, Texas

www.aera.org/conferences www.aera.org

facebook.com/aeraep

twitter.com/aeraep

THE SOURCE FOR INFORMATION Phone 888-326 - 2 3 7 2 or 815- 526- 7600 Fax 888-329-2372 or 815-526-7601 • EMAIL info@aera.org

26

TRADER MAGAZINE Spring 2020 trader-mag.com

instagram.com/engineprofessionalmag


THE FINISH LINE ABS carries over 100 different styles and sizes of belts to meet all of your finishing needs! Soft Back•Diamond•Micro Finish•Hard Back•Cork•Scotch Bright

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

trader-mag.com Spring 2020 TRADER MAGAZINE

27


28

TRADER MAGAZINE Spring 2020 trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

29


PowerPeen Direct Pressure Blast Cabinet Optional Mobile Work Cart shown with Polyethylene Turntable, Outside Tracks and Door Modification Optional Rubber Cabinet Liners, Operator Platform with Double Steps.

The ABS Products PowerPeen Direct Pressure Blast Cabinet comes in many different cabinets sizes including 60x60x48H model, choose the one right for your application. If you need a Direct Pressure for Plastic, Glass Beads, Aluminum Oxide, Steel Shot/Grit or any abrasive type between 20 to 120 mesh the Power Peen is the right machine for the job saving dollars on the purchase. It includes a long list of standard features and access to a longer list, almost eighty, of optional features to make blasting the part and machine maintenance easy and simple. Patented Separator Reclaimer sends the spent abrasive and dust into the 220 sq.ft. cartridge dust collector complete with hopper dust storage and pneumatic vibrator cleaning cycle. Advanced LED lighting, window sweep, ASME Coded 1.0 cubic foot pressure pot, MERV tested filter cartridge, operator platform and heavy duty bar work grates and more are all included. Add an optional Mobile Work Cart making quick work of loading hard to handle large parts. Call for added information on the machine and options. 714-671-0728

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 30

TRADER MAGAZINE Spring 2020 trader-mag.com

Power Peen Direct Pressure Included Standard Features • 13” x 24” window with protector • Window sweep • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • LED advanced lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning vibrator • HD bar work grates • MERV tested cartridge, 220 sq.ft. • Dust storage hopper, 1-1/2 c.f. • 1.0 c.f. pot capacity • Operator platform included • Boron Carbide Nozzle


Handheld Polisher A Must Have!

This is a must have polisher for machine shops, motor rebuilders, hydraulic rebuilders, motor and engine repair shops. Makes polishing your crank, cam and rack & pinion shafts simple, easy and cost effective. Comes with premium Baldor motor for long life, Reinforced aluminum frame for ease of operation, Long Lasting Ball Bearing rollers which accommodate ¾” to 2” wide belts. Available in 64” or 72” models.

Contact our sales team today! (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

31 31


JACK SCHOLLER EQUIPMENT USED EQUIPMENT CRANKSHAFT GRINDERS Storm Vulcan 15C Crankshaft Grinder with Chucks, Standard Equipment,

including 4-Wheels & Hubs...................................................................................................................................$10,000.00

Berco Hubs for 225 & 270................................................................................................................................................$275.00 AMC K2000U Crankshaft Grinder - 5 Wheels & Hubs - 2 Steady Rest, Dresser

Arnold Gauge - Standard Tooling.........................................................................................................................$25,000.00

GUIDE & SEAT MACHINES Winona PH2000 Guide & Seat Machine.......................................................................................................................$3,000.00 Peterson TCM25 Guide & Seat Machine with 180 Degree Fixture............................................................................$4,000.00 Peterson TCM25 Guide & Seat Machine with 360 Degree Fixture.............................................................................$5,500.00 Peterson TCM25 Guide & Seat Machine - Variable Speed with Air Lock Fixture......................................................$6,500.00 DCM HMC2000 Guide & Seat Machine........................................................................................................................$6,500.00 PRESSURE TESTERS Master Tool Pressure Tester - 38”................................................................................................................................$3,500.00 Peterson PT38 Pressure Tester....................................................................................................................................$3,500.00 Master Tool Head Oven.................................................................................................................................................$1,000.00 VALVE GRINDERS Winona 860900 Valve Grinder.......................................................................................................................................$3,500.00 Kwik-Way SVS Valve Grinder with Collett Chuck........................................................................................................$3,500.00 Sioux 2075 Valve Grinder with Collet Chuck................................................................................................................$3,500.00 Sioux 2001 Valve Grinder with Collet Chuck................................................................................................................$3,000.00 Carmac RV3000 Centerless Valve Grinder..................................................................................................................$4,500.00 K-Line Stem Polisher........................................................................................................................................................$950.00 SURFACE MACHINES Serdi MGM 1000 Surfacer with CBN..........................................................................................................................$10,500.00 Storm Vulcan RT17PA Surfacer with CBN..................................................................................................................$14,500.00 DCM HD 3800 Surfacer with CBN..............................................................................................................................$14,500.00 Van Norman 570 Broach...............................................................................................................................................$2,500.00 Storm Vulcan 85B..........................................................................................................................................................$4,500.00 Storm Vulcan 850 Mill....................................................................................................................................................$2,500.00 Winona Van Norman SN74000D Surfacer - New CBN 14” Hub................................................................................$13,500.00 ROD HONES, ROD BORING, CAP GRINDERS, ROD HEATERS Sunnen 1699 Rod Hone................................................................................................................................................$2,500.00 Sunnen 1499 Rod Hone................................................................................................................................................$2,000.00 Sunnen CRG750 Cap Grinder.......................................................................................................................................$1,000.00 Sunnen 1299 Rod Hone................................................................................................................................................$1,000.00 Sunnen CRH-50 Connecting Rod Heater........................................................................................................................$750.00

Office: 704-871-1951 Jack: 704-906-7980 Sterling: 717-377-1587 Scott: 404-488-4378 32

TRADER MAGAZINE Spring 2020 trader-mag.com


3439 Taylorsville Highway • Statesville, North Carolina 28625 CYLINDER HONE - LINE HONE Sunnen CK-10 Cylinder Hone.....................................................................................................................................$12,500.00 Sunnen Line Hone Mandral - 15RY4500......................................................................................................................$2,000.00 FLYWHEEL GRINDERS Peterson FG24 Flywheel Grinder..................................................................................................................................$5,500.00 Winona FG5000 Flywheel Grinder................................................................................................................................$5,000.00 DCM Flywheel Grinder..................................................................................................................................................$4,500.00 BORING BARS Kwik-Way FWS II Boring Bar with Tool Box.................................................................................................................$3,750.00 Berco ACP 151 A/M Cylinder Boring Machine, 45 & 30 Degree Fixtures

Tool Sharpener, Standard Tooling...........................................................................................................................$8,500.00

Kwik-Way FL Boring Bar with Standard Tooling & Tool Box.......................................................................................$4,500.00 Kwik-Way 1291 Stand...................................................................................................................................................$1,200.00 Kwik-Way FN Boring Bar with Standard Tooling & Tool Box.......................................................................................$5,500.00 Waida 01 Boring Bar with Tool Box..............................................................................................................................$1,800.00 Rottler F2B Boring Bar, 45 & 30 Degree Fixture, Tool Sharpener, Standard Tooling..................................................$7,500.00 Rottler F2B Boring Bar .................................................................................................................................................$7,500.00 CLEANING EQUIPMENT Peterson 48 Glass Bead Machine................................................................................................................................$1,450.00 Bayco Oven BB-12........................................................................................................................................................$3,500.00 Peterson BK17 Oven.....................................................................................................................................................$1,500.00 George Olcott Valve Tumbler...........................................................................................................................................$750.00 Goff Bayco Cleaning System - Oven - Steel Shot - Shaker........................................................................................$7,500.00 Kansas Instruments 502B Steel Shot Machine............................................................................................................$3,500.00 MISCELLANEOUS Sunnen TS100 Tool Sharpener........................................................................................................................................$950.00 Kalamazoo Band Saw...................................................................................................................................................$1,500.00 Ammco 4000, 4100, 3000, 7000 Drum & Disc Lathes............................................................................................ Call for Price 6 - Air Compressors................................................................................................................................................ Call for Price New Dowell Pin Puller Set................................................................................................................................................$175.00 New Piston Pin R & R Set................................................................................................................................................$175.00 New Sioux Tapered Pilots..................................................................................................................................................$37.50 Diamond Flywheel Stones...............................................................................................................................................$175.00 New - Portable Crankshaft Polisher................................................................................................................................$795.00 Sioux Seat Grinding Stones - 1-1/8” through 1-1/2”..........................................................................................................$9.25 Sioux Seat Grinding Stones - 1-9/16” through 1-15/16”..................................................................................................$10.00 Sioux Seat Grinding Stones 2” through 2-1/2”.................................................................................................................$11.00 Sioux Seat Grinding Stones 2-3/4” through 3-1/4”..........................................................................................................$19.50 Kwik-Way Seat Grinding Stones............................................................................................. Same Sizes and Prices as Sioux Sunnen Rod Hone Mandrals - CR, PL, KL, LJ, 4UL Series................................................................................... Call for Price Nugier 100 Ton Press....................................................................................................................................................$7,500.00

email: jackschollerequip@att.net email: jackschollerequipment@roadrunner.com

www.jackschollerequipment.com trader-mag.com Spring 2020 TRADER MAGAZINE

33


Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing. Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments. Works great will all degree wheels through 16” or larger depending on the mounting hole.

3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ----------- $495

18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings. Part #ST-DegreeWheel-18 -------------------- $225.00 Pointer ------------------------------------------$60.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

34

TRADER MAGAZINE Spring 2020 trader-mag.com


Innovative Machine and Supply, Inc. 345 Sun Valley Circle Fenton MO 63026 Local 636-600-1171 • Fax 636-600-1181

www.innomach.com email scottb@innomach.com

trader-mag.com Spring 2020 TRADER MAGAZINE

35


HIGH PERFORMANCE OFF-ROAD ENGINE BUILDER. HOME OF ULTRA-4, SCORE, AND BEST IN THE DESERT NATIONAL CHAMPIONS. VISIT OUR WEBSITE TO START YOUR ENGINE PROGRAM UTILIZING STATE OF THE ART EQUIPMENT FROM MANUFACTURES SUCH AS: ROTTLER, , NEWEN, SERDI, HINES, ABS PRODUCTS, AND MORE. CHECK US OUT ON INSAGRAM @jeffginterracingengines

36

TRADER MAGAZINE Spring 2020 trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

37


Pollution Control Workstations

$7,900

.00

Pollution Control Workstations PCE-4736

47˝ W x 36˝ D, 440 sq. in. filter, removable dust pan, fiberglass grate, plexiglas enclosed top that swings up out of the way for loading, swings down to keep particles out of shop, single motor on the back 3/4 HP @ 750 cfm. Move up to 2HP, 1100 cfm blower.

Upgrade from ABS-4228, this is the latest pollution control workstation from ABS Products. This machine is a must in today’s market where you are working with plastic, fiberglass and carbon fiber that you have to keep out of your lungs.

See More Pollution Control Workstations and many other products: www.youtube.com/absproducts

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com 38

TRADER MAGAZINE Spring 2020 trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

39


Multi-Abrasive 2-station Blasting Cabinets for Production Engine Rebuilders! PowerPeen 6048

We built this super-flexible two-station blasting system for Gary Kehrer at Platinum Performance Group in Sunnyvale, TX. Gary works on aircraft engines such as the Lycoming prop engine cases pictured above. There is also a photo of the welded steel tubing that works as an engine mount to hold those engines in. They are stripped down to remove paint and magnafluxed, Gary’s shop does it all. He also works on Continental flat 6’s, race boats, aluminum magnesium heads from different manufacturers. Shot peening, plastic media, glass bead, all runs through this versatile production quality machine. If you run a large production shop like Gary’s we have the custom blasting machines you need.

This makes an EXCELLENT shot peening cabinet for diesel cranks or anything!!! Tools for Performance Racing Engine Builders 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

40

TRADER MAGAZINE Spring 2020 trader-mag.com


Excellent maching for shot peening cranks! In fact that’s what we designed it for!

The welded steel tubing that works as an engine mount Lycoming prop engine.

Lycoming prop engine cases on turntable and dolly system, entering the blaster.

Nozzles for shot peening, blasting and plastic media! • A2 tool steel • Heat treated to 80 Rockwell • 6” x 1/2” OD 90 degree nozzle • 5” x 1/2” OD straight nozzle • 3” x 1/2” OD straight nozzle • 4-1/2” x 3/8” OD 90 degree nozzle • 3” x 3/8” OD straight nozzle

Each nozzle: $250.00 Full set: $1250.00 trader-mag.com Spring 2020 TRADER MAGAZINE

41


THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized & your stock safely stored!

CH-1 Crank Rack

CH-1 Crank Rack with optional top, V-blocks and one cam hanger.

CH-2 Double Crank Rack

CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level. Each level holds between 20-24 cranks depending upon the model.

ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)................................... $149.00

Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory. This is a rack for every crank.

SAVE MONEY AND FLOOR SPACE!

2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack

591 West Apollo Street • Brea, CA 92821 phone 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

42

TRADER MAGAZINE Spring 2020 trader-mag.com

System on Best Storage the market!


Can Be Arbors perately! e S Bought

Mill Mounted Drilling Platform

ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)

ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments

Drilling Platforms for Hines & Winona Balancers

$149.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

ABS-Products.com Call 714-671-0728

Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert. Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.) CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack. CR-ES-3 ............................................................................. $95.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.

Tools, Equipment, Machines for Engine Builders & Rebuilders trader-mag.com Spring 2020 TRADER MAGAZINE

43


3030 PowerPeen Industrial Direct Pressure Each abrasive delivery method (siphon and direct pressure) has its own “best applications” just like engines open to atmosphere and engines using boost to overcome one atmosphere. Each model also has its best application for the cabinet size; one size does not fit all! The PowerPeen 3030 is the smallest cabinet size in a seven cabinet lineup. The 3030 is a compact size with all the features included making it an Industrial Direct Pressure Cabinet in a smaller package. Use for shot peening quick replacement parts or use for glass bead, plastic and all the other media types.

Standard Features • 13” x 24” window with protector • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • Advanced LED lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning • Bar work grates • MERV tested cartridge, 220 sq.ft. • Dust storage hopper, 1-1/2 c.f. • 1.0 c.f. pot capacity, Charger model • Operator platform Included • Boron Carbide Nozzles

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 44

TRADER MAGAZINE Spring 2020 trader-mag.com


5.0 CRANK&CAM POLISHER

Over 50 years of polisher manufacturing experience and we never stop improving our products. Our new 5.0 versions make cleaning and micro polishing crankshafts, camshafts and rack & pinion shafts fast and easy. With variable speed control, spring loaded polishing belt arm for quick and easy belt changes, heavy duty, long lasting frame and components.

///////////////////////////////////////////// Please contact us for a spec sheet and pricing.

Many types of shafts and cylinders can also be polished on our machines. Standard sizes are 32”, 42” and 48” centers. Custom sizes also available upon request. /////////////////////////////////////////////// Crankshaft Polisher (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Camshaft Polisher 45


The Hurricane Wet Blast Machine, For A Finer Finish Media Blast manufactures more than 170 standard models and sizes of blasting cabinets with over 80 optional features for increased productivity, durability, and operator safety. Our extensive line of Wet, Dry, Siphon and Direct Pressure blast cabinet models includes specialty machines for automotive, aerospace, military, precision focused micro blasting, plastic stripping, soda blasting, tumble part processing and shot peening. Cartridge dust collectors, HEPA after filters and separate standing timed reverse pulse cleaning dust collectors are included as standard sandblasting equipment or available option upgrades. The Hurricane Wet Blaster has many applications in the automotive field to include 3-D printing, processing wheels, chemically clean part surface, zero abrasive embedment and the elimination of frictional heat capable of damage and part distortion.

Standard Features • Stainless Steel Cabinet • Seal-less Slurry Pump • 25 to 28 % Abrasive Suspension for faster processing • Negative Pressure Cabinet with Mist Collector Blower and Filter • LED Cabinet Lighting • Positive Locking Window Seal

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 46

TRADER MAGAZINE Spring 2020 trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

47


ALL NEW, Pro G/S The Pro G/S is a more compact cabinet using smaller amounts of compressed air designed for shops with limited floor space and smaller part volumes. The Pro G/S was designed specifically for use with Grit and Shot or combinations of the two. Applications Finishes and Camouflage Repairs. The included casters allow the machine to be rolled into position,used, and then moved to a stored location.

Attached Dust Collector

FEATURES & BENEFITS • Duplicates Original Factory Finishes • Camouflage Surface Repairs • Reaches Down Into Deep Cylinder Ports • Compact Footprint with Casters • Negative Pressure 100% Welded Dust Collector • 90 sq. ft cartridge filtration • Semi-Automatic Dust Collector Vibrator Cleaning Cycle • Advanced LED Lighting • ASME Coded Pressure Pot with Access Port • LG. 13X24” view window

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 48

TRADER MAGAZINE Spring 2020 trader-mag.com


BY ABS

Built for PERFECTION E n g i n e B u i ld i n g To o l s

Piston Deck Height Bridge

Piston Ring Squaring Tool

Check the piston height easily, adjustable mounts move to fit any size bore, adjustable gauge mount to zero the gauge where you want. A must have tool when calculating piston deck clearance. Includes gauge and can also be used to measure flywheel step height.

Fast, easy and repeatable fixture for squaring rings in the bore prior to setting end gaps. Two sizes, RG-RST covers bores from 2.000” to 5.000” and RG-RST-D covers bores 5.000” to 8.000”. Places rings 1.000” below the deck to get past head bolt distortion. Longer (3”) legs available if desired. • No wrenches required • Change bore sizes in seconds!

Precision V-Blocks 714.671.0728 abs-products.com sales@abs-products.com youtube.com/absproducts

For precision keyway milling and cross drilling cranks. Consists of V-Blocks, hold down bars, nuts, T-nuts and locators. Fits most milling machines.

trader-mag.com Spring 2020 TRADER MAGAZINE 49


Shop Equipment for Sale:

Custom Steel Boxes

2: CRG-500 cap grinders/ 3: Sunnen rod hones RTM Berco 225 crankshaft grinder reconditioned & aligned................................................ $8000

We make standard and custom Hand Held Tool Boxes, Metal Cases, Totes, Courier Boxes, Lock Boxes, Cantilever Boxes, Garage and Shop Organizers. Contact us to see how we can help you with your steel box needs. Don’t forget to ask about our inventory of seconds and overstock. All made right here in America.

Storm Vulcan Crankshaft Welder.................................. $3500 Crankshaft Straightener............................................... $1200 KwikWayFN cylinder boring-bar................................... $3000 Ampro thermal cleaning system. The smaller system will do a 350 chevy block.......................................... $3000 Van Norman boring stand............................................. $1000

PioneerSteelUSA.com 714 255-0526 _______________________________________________

Van Norman 400 crankshaft grinder............................ $4800 Sunnen CRG 750 cap grinder....................................... $1050 Kwik-Way Spray Washer Model 214 NatG.................... $2500 Ferndale, Michigan Adney Brown 586-549-7557

Kwikway Boring Bars: Norum Equipment Refurbished Kwikway Boring Bars models FWSII, FWII, FN, and FL’s outright or exchange. 40 years with Kwikway.

_______________________________________________

Shop for Sale: Auto dynamic balancing and engine rebuilding. Doing business in Baldwin Park, California since 1959. Work year-round. Selling the business w/ all machines, equipment and customer list.......................................... $90K Rod Philips Auto Dynamic Balancing 626-962-9135

Call Dick Norum 715-689-2882 or dick@norumequipment.com

_______________________________________________

Marketing Materials: Need an ad or logo? Catalog or marketing materials? Call 714-447-0167 or email: dan@DGVC.net www.DGVC.net

Advertise now in the Trader Classifieds Call: 714/ 671-0217 50

TRADER MAGAZINE Spring 2020 trader-mag.com

www.trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

51


03TT_20ArmaKleen50.qxp 2/13/20 2:35 PM Page 1

LEADER

The

...in aqueous parts cleaning

Professional Racers Turn to ArmaKleen

ARMAKLEEN™ supplies only the highest quality environmentally sensible aqueous parts cleaning formulas and paint removing chemicals. Our innovative, patented cleaners are rigorously tested and designed for use in almost all commercial and industrial parts cleaning applications

™

ArmaKleen.com

52

& ArmaKleen.com/Ask-Andy

TRADER MAGAZINE Spring 2020 trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

53


N-200 Stage II Soda Blaster Using GhostFlow™ Technology

STANDARD MACHINE FEATURES • Three (3) Cabinet Sizes • 36x36, 48x36 & 48x48 (w x d) • 13” x 24” ClearView™ Window • Easy Clean MERV Tested Cartridge Filter • Pneumatic Vibrator Dust Collector Cleaning Cycle • Reverse Pulse Dust Collector Cleaning Cycle • 700 CFM Blower w/ Silencer • Easy to use Soda Pressure Generator with Control Panel • ASME Code 0.8 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 9 to 22 CFM Soda Nozzle • Large Side Access Door • Pneumatic Soda Feed System

The N-200 Stage II Soda Blasting Cabinet is one of the most popular of the NEW Soda Models using larger cabinets and larger dust collector sizes. This allows the user to operate longer hours and access other part handling options important to soda blasting applications. This is a great choice for cleaning many automotive parts like automotive heads when you want the original finish and a soluble abrasive to eliminate any abrasive residuals. The Patented Separator Reclaimer prevents 95% of the used soda from transferring into the dust collector. This unique design allows longer daily machine operation and more daily part production. Downdraft Cabinet Airflow using GhostFlow™ Soda Delivery Technology and Used Soda Dropout are what make ABS Products the leaders in soda cabinet technology. (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

54

TRADER MAGAZINE Spring 2020 trader-mag.com


Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head! 1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 5. Easy 6. Profitable

714-671-0728 abs-products.com

RPM

Equipment Sales Jupiter Florida

Provider of High quality new & used engine rebuilding equipment. We Export!

VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00

VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 VT-2500-4500-F 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting ............$21.80 VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting ......................$21.80 VT-3000-4000 3”x 3” pad without fitting ......................$21.80 VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 VT-3000-4000 3”x 4” pad without fitting ......................$22.80 VT-6000-6000 6”x 6” pad without fitting ......................$24.95 VT-3-TP 11”x 35” table pad for VT-3 ...................$62.95 VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 VT-SP-14 14 mm spark plug adapter ....................$39.00 VT-SP-18 18 mm spark plug adapter ....................$49.00 VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 GA-LG Liquid filled gauge .................................$80.00 VT-3-H 1/4” vacuum hose ..................................$39.00 VT-RV Release valve ..........................................$42.00 VT-TA Table adapter .........................................$10.00 VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 VT-3-P 3 CFM pump .........................................................$328.98 VT-5-P 5 CFM pump ........................................$475.00

Ralph Nettles

ralphnettles@msn.com

561-906-2827

Warehouse Location 380 NW 144th Drive Okeechobee Fl. 34972

rpmequipmentsales.com trader-mag.com Spring 2020 TRADER MAGAZINE

55


ENGINE REBUILDING

EQUIPMENT SALES • SERVICE • NEW & REBUILT

• Servo Motor Quill • Direct Travel Wheel • Digital Leveling Device • Cutter Blade Sharpener • Travel Stop • Dead Pilot System • Vacuum Tester • High Power Lead Illumination

56

TRADER MAGAZINE Spring 2020 trader-mag.com

joebakerequipsales.com


COBRA STAGE I SODA BLAST CABINET

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com Spring 2020 TRADER MAGAZINE

57


EASY REFERENCE BALANCING CHARTS HEAVY METAL BALANCING WEIGHT GAIN CHART DIA. X LENGTH

58

CONVERSION CHART OUNCES TO GRAMS

TUNGSTEN

STEEL

NET GAIN

7/16" x .875" 1/2" x .750"

38 43

17 19

1/2" x 1.000" 1/2" x 1.200"

57 65

1/2" x 1.250" 5/8" x 1.000"

OZ

GRAMS

21 24

1/16

=

1.77

1/8

=

3.54

25 30

32 35

3/16 1/4

= =

5.31 7.08

72 91

31 39

41 52

5/16 3/8

= =

8.85 10.62

5/8" x 1.200"

109

47

62

5/8" x 1.250"

114

49

65

3/4" x 1.000"

122

56

66

3/4" x 1.200" 3/4" x 1.250" 7/8" x 0.500" 7/8" x 0.700" 7/8" x 0.750"

147 162 87 117 127

67 70 38 54 58

80 92 49 63 69

7/16 1/2 9/16 5/8 11/16

= = = = =

12.39 14.16 15.63 17.70 19.47

7/8" x 1.000" 7/8" x 1.100"

169 186

77 85

92 101

7/8" x 1.200"

198

92

106

7/8" x 1.250"

210

96

114

1" x 0.500"

111

50

1" x 0.700"

153

70

1" x 0.750" 1" x 0.850"

164 190

1" x 1.000"

3/4

=

21.24

13/16

=

23.04

7/8

=

24.78

61

15/16 1 2 3 4

= = = = =

26.55 28.35 56.70 85.05 113.40

83

5

=

141.75

75 85

89 105

6

=

170.10

227

100

127

1" x 1.100"

243

110

133

1" x 1.200"

265

120

145

1" x 1.250"

275

125

150

1-1/8" x 1.000"

282

127

155

1-1/8" x 1.200"

325

153

172

1-1/8" x 1.250"

350

160

190

1-1/4" x 1.000"

346

157

189

7 8 9 10 11 12 13 14 15

= = = = = = = = =

198.45 226.80 255.15 283.50 311.85 340.20 368.55 396.90 425.25

1-1/4" x 1.200"

418

189

229

16

=

453.60

1-1/4" x 1.250"

445

196

249

1-3/8" x 0.750"

328

142

186

1-3/8" x 1.250"

543

237

306

1-1/2" x .600"

304

135

169

1-1/2" x 1.000"

504

226

278

1-1/2" x 1.250"

635

283

352

TRADER MAGAZINE Spring 2020 trader-mag.com

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts


Mention This Ad For A Special Discount

Balancing Slugs, Pins, Plates & Bars

Our heavy metal arrives finished, ready to install, oversized by .002-.003 for a precise press fit. We have the best quality, largest inventory and over 30 years experiences with heavy metal for crankshaft and chassis balancing.

Contact our sales team today! (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

• Hundreds of sizes in stock • Custom sizes available upon request • We can cut weld chamfers on any order trader-mag.com Spring 2020 TRADER MAGAZINE

59


Heavy Metal Checking Weights lf you’re tired of the guess work involved when balancing with heavy metal you need heavy Metal Tungsten Checking weights! Quickly and accurately establish the exact location and amount of heavy metal needed prior to drilling. our check ing weights fit securely between crankshaft counterweights al lowing the exact simulation of heavy metal. Get it right the first time everytime! available in 1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4” and 1-3/8” diameters in simulated lengths of 1.200” *made from steel

Part Number Item Description Price CW-100 Checking Weights - 1” Heavy Metal gms ................................................................................................................... 50.00 CW-1125 Checking Weights - 1-1/8” Heavy Metal....................................................................................................................... 60.00 CW-1250 Checking Weights - 1-1/4” Heavy Metal....................................................................................................................... 70.00 CW-1375-1250 Checking Weights - 1-3/8” Heavy Metal for 1.250” long pieces................................................................................... 80.00 CW-1375-750 Checking Weights - 1-3/8” Heavy Metal for .750” long pieces .................................................................................. 80.00 CW-500 Checking Weights - 1/2” Heavy Metal .......................................................................................................................... 30.00 CW-625 Checking Weights - 5/8” Heavy Metal .......................................................................................................................... 35.00 CW-750 Checking Weight - 3/4” Heavy Metal ............................................................................................................................ 40.00 CW-875 Checking Weights - 7/8” Heavy Metal .......................................................................................................................... 45.00 CW-PB Poor Boy Checking Weights - Coupler with bolt - Add Balancing Clay to make any size Chking Wt.................... 7.00

R8 Collet required for straight shanks: 7/16”, 9/16”, 5/8”, 3/4”, 7/8” $125.00 Morse Taper version available for same price

Heavy Metal Start-Up Kit “Get Started Installing and Balancing with Heavy Metal” Getting starled on anything is usually the hardest part, but with the Heavy Metal Start Up Kit you’ll be installing and balancing with heavy metal in no time. We’ve included all the necessary drills and reamers needed for the installation plus enough Heavy Metal for several balance jobs. And just so we could assist you in those balance jobs, we went ahead and included 20 Heavy Metal Checking Weights. These checking weights will enable you to accurately determine the precise amount and location (prior to drilling) where Heavy Metal is needed. Heavy Metal Start-Up Kit comes with: (10) 1” x 1.200” pieces of heavy metal and (8) checking weights (10) 7/8” x 1.200” pieces of heavy metal and (8) checking weights (10) 3/4” x 1.200” pieces of heavy metal and (2) checking weights (5) 5/8” x 1.200” pieces of heavy metal and (2) checking weights (10) 1/2” x 1.200” pieces of heavy metal and (2) checking weights (2) 7/16” x 7/8” heavy metal dowel pins for Chevrolet (1) Drill bit in each of the following sizes: 31/32”, 27/32”, 23/32”, 19/32”, 15/32” (1) Reamer in each of the following sizes: 1”, 7/8”, 3/4”, 5/8”, 1/2” *specify straight shank or Morse taper when ordering Optional 3/4” straight shank to #3 Morse taper and adapter add $59.00

60

TRADER MAGAZINE Spring 2020 trader-mag.com

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts


trader-mag.com Spring 2020 TRADER MAGAZINE

61


STANDING ON THE GAS SINCE 1963. Mickey Thompson was unstoppable. He was the first American to 400+MPH at Bonneville & the manager of Lions Drag Strip. At heart, Mickey was a drag racer, now his DNA lives on in the innovative winning products we build today while we continue to break records in professional drag categories. UNCOMPROMISED CONSTRUCTION / UNDISPUTED PERFORMANCE. #MICKEYTHOMPSONTIRES M/T PROUDLY MAKES TIRES IN THE USA. 62

MICKEYTHOMPSONTIRES.COM

TRADER MAGAZINE Spring 2020 trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

63


$190.00

We sell these to work with a 5˝ or 6˝ Starret Indicator. You buy your own indicator and we provide the mounting bracket! 591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

64

TRADER MAGAZINE Spring 2020 trader-mag.com


Get Abrasive! ABS Blasting Media Abrasives for all Applications.

Cleaning parts, removing paint, powder coating, surface blending or surface preparation, ABS has the right type of blasting media for all your needs. We keep a wide variety of types and sizes in stock. Give us a call to discuss which abrasive will work best with your application and machine. BAKING SODA PLASTIC MEDIA

STEEL GRIT

ALUMINUM OXIDE

STEEL SHOT

(714)671-0728 ABS-Products.com info@ abs-products.com youtube.com/absproducts sales@abs-products.com

GLASS BEADS

trader-mag.com Spring 2020 TRADER MAGAZINE

65


'$-*4!-%*/4+%,#%*!%+,5$%612%!-%7!8"%"$9),:$'$-*

!    

 



9),*$-%;"4-#$" +,)$%9"4:$<%=>?@@& V2-&%A/2*#W%XY4IIZ%%% FGJ9%[J"R%M%Q2$1,#%(/%G%0"+-#%

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

+$$%8+%,*%(!!*/%A&B6C

!"#$"%&%!"%'!"$%($)*+%,-#%*,.$%,-!*/$"%012%!33% :8+="#'(B#@#$?C(>&"D#E%

.8+="#'(B#@#$?C(>&"D#E%

L#,&%Q2R# Belt Size

A+/&%S Part # 2*344+4 2*348+4 2*3:9+4 2*:88+4 2*:8*+4 2;<.*3386

!"#$% Price 566788

!&"'()# Part

564788 561788

2;<.*33:9 2*34*+4 *:/(0(**6+*-3/ *4/(0(*3,+*-3/ 2*343+:

**+,-./(0(,1/ **+,-./(0(,9/ **+,-./(0(.9/ **+,-./(0(9*/

*:/(0(.1/ *:/(0(*86/ *:/(0(*8,/(

:8+="#'(G@AH#CAH(L0#E%

F?"(G@ AH#CAH

F?"(G@AH#CAH(K(>&I'(J"?C

F?"(>&I '(J"?C

!"#$% Price 561788

!&"'() Part #

2*348+1

561788

2*348+.

2*3:9+1

5:6788

2*3:9+.

2*344+6

2*344+.

2*3:9+*

5,1788 5,.788 5..788

5.3788

2;<.*33*8

54*788

2;<.*3314

5**.788

2*34*+.

596788 599788 5**1788

2;<.*3318

54.788 511788

2*34*+*

5*38788 5*:1788

2*34*+6 2*343+6

2*348+*

2*343+3

2*:8*+*

2*343+*

| | @     |       Intl: 001-316-219-3500 | 800-533-8008 | winonavannorman.com | sales@wininavannorman.com 66

TRADER MAGAZINE Spring 2020 trader-mag.com

!"#$% Price 5,8788 5,6788

2;<.*33*3

2;<.*33:.

5:.788 54.788 516788

544788 544788

2*344+*

2*:88+*

2;<.*338,

5:.788

2*:8*+6

!&"'()( Part #

54.788 518788

2*:88+.

2*:88+6

!"#$% Price 546788

2*:8*+.

5:1788 5:.788 5:.788

56.788 5:6788

:8+="#'(>??@(>A' .(/%T+- &%O/($%U%Q&##,

5**.788


trader-mag.com Spring 2020 TRADER MAGAZINE

67


  

   

567!8!59:;<

"#$!%!&'!(&')!*+&,)*! -,.!+-/)!-,&+0)'!

123!&44!

!

     

      Â Â?Â?Â?Â? Â Â? Â 

­Â&#x20AC;

Â&#x201A;  Â

  Â&#x192;Â&#x201E;­Â&#x2026;!Â&#x2020;Â? ­



 

 â&#x20AC;?

Â?Â?Â?

 

/3!&""





 Â?Â?

 â&#x20AC;?

Â?Â?Â?

 

/:0&""



 ­Â&#x20AC;Â&#x201A; 

 

Â&#x192;â&#x20AC;?

Â&#x201E;Â&#x20AC;Â&#x2026;­



/."&""



 ­Â&#x20AC;Â&#x201A; 



 â&#x20AC;?

Â?Â?Â?

Â&#x2020; 

/:3&""



­��



  



     -'#./*,0,12"$,#*"3



!"#$%&'(

)*+,

67&%)*8,5

!"##$"%

$&""'

()*+,-

 





!"##$!%

.&""'

()*+,-

 

/#01&""



!2...$%

3&""'

()*+,-

 

/#00&""



!"##."%

2&""'

()*+,-

 

/$$"&""



!"##."%4

2&""'

()*+,-



/$$"&""



!"##."-

2&""'

-5*678-9 ()*+,-

Hard spray coated flywheels

/$$"&""



!"##":%

$&""'9

;<+*5=><

=?@?ABC9DEADFG?H9IFA9JBGK9LAF@9M9N?OLEN9GK??C

/#$!&""



!"##"2%

$&$:'

;<+*5=><

=?@?ABC9DEADFG?H9IFA9JBGK9LAF@9M9N?OLEN9GK??C

/#.!&""



!"##"1%

$&:"'

;<+*5=><

=?@?ABC9DEADFG?H9IFA9JBGK9LAF@9M9N?OLEN9GK??C

/#:3&""



!"##"!%

.&""'

;<+*5=><

=?@?ABC9DEADFG?H9IFA9JBGK9LAF@9M9N?OLEN9GK??C

/#01&""



!"##."%=

2&""'

()*+,-

>?BPQ9RABDSLK?9T9U?GK9IFA9VLCC?K9GK??C

/$$"&""



!"##$.%

:&""'

()*+,-

=?@?ABC9DEADFG?H9IFA9JBGK9LAF@9M9N?OLEN9GK??C

/$#"&""



!"##$.%=

:&""'

()*+,-

>?BPQ9RABDSLK?9T9U?GK9IFA9VLCC?K9GK??C

/$#"&""



4*5$

"##$%"$&'$())'*$+,-./



| @Â Â?Â?Â?| Â Â?Â?Â? 

   

Intl: 001-316-219-3500 | 800-533-8008 | |winonavannorman.com | sales@wininavannorman.com 68

TRADER MAGAZINE Spring 2020 trader-mag.com


Rotary Table Washers Rotary Table Washers have a powerful pump to completely clean grime, oil, dirt, or other impurities. Often used for cleaning large engine parts but can be useful for a variety of different items. The heated solution is pumped throughout the oscillating manifolds and cleaning nozzles for effective and quick cleaning.

Model

Work Evenlope

Overall Dimensions

Pump

Table Weight Capacity

36 RWB

36” DIA x 42” H

91” x 111” x 121”

30 HP

1500 lbs

55 RWB

44” DIA x 55” H

98” x 136”

20 HP

5000 lbs

72 RWB

72” DIA x 80” H

11’ x 18’ x 11’

15 HP

1500 lbs

Starting at

$29,000

Intl: 001-316-219-3500 | 800-533-8008 | winonavannorman.com | sales@wininavannorman.com

trader-mag.com Spring 2020 TRADER MAGAZINE 69


STAINLESS STEEL TABLE WASHERS Don’t waste time on dirty jobs, let us clean the parts while you make money.

Perectly equipped for cleaning dirty engine parts like heads, blocks, and cranshafts.Set the timer for up to 60 minutes and go on with other projects. The electric heating elements guarantee quick-solution heat up and maintain steady temperatures throughout use with no wait time. The double-lipped door seal prevents leaks and requires no gasket to maintain. Save clean-out time with the side drains and full tank access at the from of the machine. The stainless steel construction is built for a long life requiring low maintenance. The Large diameter nozzles flood parts with solution without getting clogged.

$6,995.00 List Price: $8,995.00

SSW3517 | Basket 33” dia x 17” h

$9,995.00 List Price: $11,995.00

SSW4525 | Basket 45” dia x 25” h

Table Size

Tank Capacity

Pump Pressure

Heater

Table Capacity

Cycle Time

SSW3113

28.3 dia x 13.7” h

20 gal

36 PSI

4.5 KW

265 lbs

0-30 Minutes

SSW3517

33.4 dia x 17.7” h

26 gal

36 PSI

9 KW

660 lbs

0-30 Minutes

SSW4525

43.3 dia x 25.5” h

46 gal

46 PSI

13 KW

970 lbs

0-30 Minutes

SSW5325

53.1 dia x 31.4” h

79 gal

87 PSI

15 KW

1430 lbs

0-30 Minutes

Intl: 001-316-219-3500 | 800-533-8008 | winonavannorman.com | sales@wininavannorman.com 70

TRADER MAGAZINE Spring 2020 trader-mag.com


WVN-5000

$16,495

LIST: $17,995

- 10 gallon steel cabinet - Oscillating jets - Insulated tank - lower energy cost - High heat for fast thorough cleaning - Great for cleaning all types of parts: Starters, Alternators, Blocks, Transmissons - Sealless pump - less maintenance

WVN-2044

$15,495

LIST: $16,996

- Automated rotary table washer - 55 gallon tank - Removeable table - 44â&#x20AC;? tall wash space - 20â&#x20AC;? diameter table - Easy access loading table Intl: 001-316-219-3500 | 800-533-8008 | winonavannorman.com | sales@wininavannorman.com trader-mag.com Spring 2020 TRADER MAGAZINE

71


Update your Piston Ring Grinder to an ABS Ring Grinder!

START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs. We have what you need for any type of ring! Complete with Micron Disk Micron Disk, 1 - 4” Turntable ---$1,455.00 Micron Disk, 1 - 5” Turntable ---$1,555.00 Micron Disk, 1 - 6” Turntable ---$1,655.00 Diamond or Borzon Disk ----------$325.00

New Scotch Brite Buffing Wheel RG-5953 -----$10.50 ea. New Felt Buffing/Deburring Wheel RG-5952 ---$14.75 ea. New Stick-On Disks RG-5956 --------------10 for $50.00 12 pack of Micron Disks --------------------------$19.25 50 pack of Micron Disks --------------------------$65.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

72

TRADER MAGAZINE Spring 2020 trader-mag.com


trader-mag.com Spring 2020 TRADER MAGAZINE

73


Blizzard Stage III Soda Blaster Using GhostFlow™ Technology

Production applications are what the Blizzard Stage III was designed for, if you have multiple daily shifts we offer dust collector upgrades to 880 sq.ft. with automatic timed reverse pulse cleaning that includes manual over-ride controls. Clean any part down to the original finish and do it with a water soluble abrasive to eliminate any abrasive residuals and know the part has been unchanged. 95% of the used soda is collected outside the cabinet preventing it from entering the advanced easy clean dust collector with Automatic Timed Reverse Pulse Cleaning Cycle. The Blizzard also includes manual pulse over-ride controls for added cleaning. The Pneumatic Vibratory Cleaning Cycle is also standard allowing the user up to four ways to clean the dust collector to make sure it’s always clean.

STANDARD MACHINE FEATURES

• Four (4) Standard Cabinet Sizes 36x36, 48x36, 48x48 & 6060 (w x d) • 13” x 24” ClearView™ Window with Window Sweep • Easy Clean MERV Tested Cartridge Filters • Auto/Timed Reverse Pulse Dust Collector Cleaning Cycle with manual over-ride controls • Pneumatic Vibrator Dust Collector Cleaning Cycle • Magnahelic Monitor Gauge • 1100 CFM Blower w/ Silencer • Pneumatic Conveyor with 95% Used Soda Collection before the dust collector • Easy to use Soda Pressure Generator • ASME Code 1.0 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 10 to 22 CFM Soda Nozzles • Ergo Flexible Abrasive Hose • Pneumatic Vibrator Soda Feed System

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

74

TRADER MAGAZINE Spring 2020 trader-mag.com


30 Is Non-Destructive Cleaning Critical?

Remanufacturing Starts with ARMEX The first step in remanufacturing and rebuilding of engines, transmissions and other components is cleaning. ARMEX has answered the problem of ineffective and time-consuming cleaning processes by launching Re-Man XL, the first abrasive blasting media specifically formulated for the transportation remanufacturing and rebuilding industry. Hard to clean contaminants are no match for Re-Man XL. With its extraordinary ability to quickly eliminate grease and oils plus the power to remove burnt-on carbon, light rust, gasket materials, coatings and grime all in one-step. Furthermore, Re-Man XL will never damage what you are cleaning, reducing rejected cores and components. If you want to improve your cleaning processes all while saving time and resources Re-Man XL is the only choice.

Before

After

Before

After

ARMEX, the Original Baking Soda Abrasive

Learn more at www.armex

ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc. Pantone 2758 C

trader-mag.com Spring 2020 TRADER MAGAZINE

75


(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 76


trader-mag.com Spring 2020 TRADER MAGAZINE

77


Don’t Wait. Sale Ends Soon! SAV E

2500

$

SG8MTS

for orders placed while stock is available MANUALMATIC VERSATILITY The SG8MTS has TWO modes of Operation: MANUALMATIC – Increased productivity by 30-50% while cutting all valve seats to equal depth. During seat cutting, simply turn the spindle feed steering wheel and the control takes care of all the functions like workhead float/clamp, centering in the valve guide and spindle speed on/off – no buttons! MANUAL – Touch Screen buttons function just like physical buttons. The spindle vertical position is displayed on the touch screen. Simply fed the spindle down until the cutting insert touches the valve seat, touch “set zero” button and then the digital display will show exactly where the spindle is at all times.

THE CUTTING EDGE

8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc


Simple. Fast. Competitive. Rottlerâ&#x20AC;&#x2122;s Cylinder Head Machining Equipment is so advanced that even the most complex operations can be programmed and executed quickly, accurately and reliably. For surfacing, seat and guide installation and cutting and valve refacing procedures, only Rottler has the cutting edge you need to maximize performance and profitability.

Rottlerâ&#x20AC;&#x2122;s surfacing machines are the fastest machine for surfacing heads, blocks and manifolds. Designed with the latest CNC technology and proven designs found in Rottler CNC machining centers! Handles the smallest parts to large diesel cylinder heads.

Rottler MANUALMATIC control has revolutionized valve seat cutting! During seat cutting, the operator does not have to operate any buttons, switches or pedals, simply turn the spindle feed handwheel up and down and the MANUALMATIC control takes care of all the functions

THE CUTTING EDGE

Rottler's centerless grinding valve refacing machine is designed to grind a set of valves to equal length from stem/butt end to valve seat. The Rottler Centerless System allows a wide range of valve stem diameters to be ground without changing any collets or chucks.

8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc trader-mag.com Spring 2020 TRADER MAGAZINE

79


3 YEAR WARRANTY GUARANTEED PRODUCTIVITY

CNC AUTOMATIC HONING

Special optional software packages allow: VARIABLE SURFACE FINISH from top ring area and lower bore area. Precision honing of “THIN WALL” cylinders such as CGI Engine Blocks and Motorcycle Cylinders. • Completely Unattended Automatic Hole-to-Hole Operation • Crash Protection prevents damage to tooling • Ease of programming – only 3 screens for a new block • Accuracy of size and surface finish including Rk parameters • Ease of Maintenance – roll out coolant tank with 3 stage magnetic filtering • Dual Stage and Multi Stone Holder Hone Heads available • Quick Change Hone Head System • Quick Size Calibration System • Reverse Rotation allows perfection of Surface Finish Today’s high performance piston rings require precise surface finishes, for reduced friction and a perfect seal. Rk, Rpk & Rvk parameters are the latest in measuring technology to achieve the results necessary for today’s high performance rings. The Rottler CNC Honing Machines utilize advanced CNC control and super abrasives to give the cylinder bore surface finish results that we require – every time! Rottler Honing Expertise is up to date with the latest technology, and they are always there to help with questions – fast!!

Used by Professionals such as RoushYates NASCAR and BES Racing to save time and improve bore finish.

– Keith Jones Total Seal Piston Rings Phoenix, Arizona

THE CUTTING EDGE 8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 rottlermfg.com 80

youtube.com/rottlermfg facebook.com/rottlermfg instagram.com/rottlercnc

TRADER MAGAZINE Spring 2020 trader-mag.com

1-800-452-0534 www.rottlermfg.com

Profile for Trader Magazine

Trader 153 Spring 2020  

Trader 153 Spring 2020  

Profile for tradermag
Advertisement