Trader 149 Spring Issue

Top Quality Affordable!™

REQUEST YOUR TOOLING CATALOG TODAY! ̻ Ǥ Ǧ ή͙Ǧ͘͟͞Ǧ͚͛​͛Ǧ͘​͘͟͞

We’ve Made

Ǥ Ǥ Ȉ Ǥ Ǥ Ȁ Ƥ

PRI/WINTER 2018 Volume 148

2

TRADER MAGAZINE Spring 2019 trader-mag.com

3

FARRIS EQUIPMENT SALES, INC. “Specializing in Used/Rebuilt Engine Rebuilding Equipment”

3001 Interstate 27 • Lubbock, TX 79404 (806) 762-0887 (800) 882-1808 CYLINDER BORING MILLS & BARS: Winona #VB-160SF Bore/Surf Mill (in AR) Berco #AC-650M Bore/Surf Mill (in AR) NEW Kwik-Way #FL & #FN Portable Bars Kwik-Way #FN-AC/048 Air Float Kwik-Way #FL, #FN, #FW, #FW-VW, & #FWS bars Kwik-Way #FL & #FN Overbore Kits Van Norman #777S & #944S Bars VALVE GUIDE & SEAT EQUIPMENT: Serdi #101 Sunnen #VGS-20C Winona #PH-2000 & #PH-2000L Peterson #TCM-25 Kwik-Way #036 & #019 LINE BORE EQUIPMENT: Berco #BC-5A (nice, nice, nice..Consignment) Scledum #BO-2500 (in Nevada) Berco #BT-6V (in California)

SUNNEN HONING EQUIPMENT & RELATED: #CV-616 Hones #CH-100 Line Hone & Mandrels #LBB-1810 Power-Stroked Rod Hones & Shop #LBB-1699, #LBB-1499, & #MBB-1660 Rod Hones & Shop #CRG-750 & #CG-8400 Cap Grinders Large #CR Mandrels from 2.9” to 4.5” Large #Y104-6562 Special Aluminum mandrel Large Line Hone Mandrels from 4.0” to 5.0” #HS-30 valve guide hone CRANKSHAFT GRINDERS & RELATED: Berco #RTM-351A Grinder –Rebuilt (in Ohio) Scledum #RG-350 Grinder RMC #1500 Grinder (60” cap)(In AR) RMC #1200 Grinder (50” cap) Van Norman #477TA (74” cap) Storm #150B Crankshaft Welder HEAD & BLOCK MILL/SURFACERS/FIXTURES: We need to purchase some late model surfacers!!!

MISCELLANEOUS: Sunnen #DCB-750 Crankshaft Balancer; Kwik-Way #SVS-D Valve Refacer; Berco #RAC-1500 Camgrinder; Ammco #6000 Brake Lathe; Kansas Instruments Flywheel Grinder; AXE & Charley Cockey Head Pressure Testers; Sioux #956 Valve Refacer; Nice Peterson #BK-17 oven; and other equipment too numerous to mention. OUR INVENTORY CHANGES WEEKLY! Check our website for most current listing.

EQUIPMENT NEEDED: SERDI #100 & #60 SEAT/GUIDE MACHINES: Sunnen #CV-616 & #CH-100 Hones, Rottler & Sunnen Seat/Guide Machines; Berco, Winona, or Scledum head/block surfacers; Berco #AB651 rod bore; AXE head pressure testers; DCM, Van Norman, & Winona Flywheel Grinders; Storm Kotifin Crankshaft Polisher; Sunnen #VR7000 or 8000 Valve Refacers: Automotive size CBN Surfacers; Kwik-Way #855, #856, & #860 surfacers; Sunnen #CHW-40 Work Stations; Sunnen #PLB-100 Line Bore; and any other equipment we can make money on. WE ARE LOOKING FOR LATE MODEL NICER EQUIPMENT. If I can’t buy it, I will try to broker it for you!

www.farrisequipment.com E-mail: Sam@farrisequipment.com

SAM FARRIS

Sam is ready to make some deals!

4

TRADER MAGAZINE Spring 2019 trader-mag.com

trader-mag.com Spring 2019 TRADER MAGAZINE

5

ABS Products “IT’S IN THERE”

Pioneer Steel 50-51

Access Industries 5

Quality Cutter Grinding 15

AERA 26

Quincy Procell 58

Air & Power Tools 22

Rad Industries 74

American Gasket 41

Revco Precision 22

Armex 77

Rock n Roll Coffee Co. 35

Baker Equipment Sales 15,24,25,58

Rottler 78-80

Business Card Marketplace 22

SBI 28

Classifieds 52

Scholler Shop Equipment 32-33

Coder 57

T & S Machine 17-21

CWT Industries 2-3

Turner Technology 14

Dakota Parts 24

Ultrasonic 36-37

Delta Custom Tools 10

Winona Van Norman 66-70

EPWI 7

Ad Rates/Specifications 53

Farris Equipment 4

Wisdom from Gary 64

Ferrea Valves 24 Irontite 47 Jack Scholler Shop Equipment 32-33 Jackson Oven Supply 22 Jamison Equipment 13 K & S Regrinding 24 Kwikway 47 Media Blast & Abrasive 44,46 Mickey Thompson 29 MPR Racing Engines 22 Natrium 22 Newen 1,9

6

TRADER MAGAZINE Spring 2019 trader-mag.com

High Performance Kits…

National Branded Kits…

Or E-Direct Value Kits…

We’ve got you Covered!

ENGINE & PERFORMANCE WAREHOUSE Inc.

www.EPWI.net

Memphis (866) 917-4728

Albuquerque (877) 767-0100

Anchorage (800) 288-5573

Denver (800) 888-8970

Tacoma (800) 876-5152

Oklahoma City (800) 937-3652

Portland (800) 876-5152

Anaheim (800) 634-0969

Dallas (800) 284-5348

Houston (800) 288-6548

Oakland (800) 234-1410

Phoenix (888) 272-0191

San Antonio (800) 423-2707

trader-mag.com Spring 2019 TRADER MAGAZINE

7

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 8

TRADER MAGAZINE Spring 2019 trader-mag.com

ONE Machine, ONE Single Tool,

COUNTLESS OPPORTUNITIES

®

www.newen.com • www.facebook.com/newenfixedturning

with NEWEN FIXED-TURNING®

NEWEN

OWN THE NOW

WORLD LEADER IN VALVE SEAT AND GUIDE EQUIPMENT

THE FUTURE IS NOW,

10

TRADER MAGAZINE Spring 2019 trader-mag.com

591 West Apollo Street • Brea, CA 92821 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

trader-mag.com Spring 2019 TRADER MAGAZINE

11

The Charger Production Pressure Blast Machine uses a large 1.0 cubic foot capacity ASME Coded pressure pot to pneumatically push the abrasive to the part using the nozzle ID size and blasting pressure to determine the compressed air usage.

Pressure Blasters require less cfm to create the same abrasive velocity during operation.

Direct pressure machines produce faster abrasive particle velocity, higher abrasive grain density and greater abrasive frictional heat for heavy coating removal and cross-drill de-burring.

• Three (3) large cabinet sizes all with 36 inch inside height • All three (3) cabinet sizes offer the Space Saving Side Mounted Dust Collector • Operator Platform Included • Direct Pressure can do something siphon can’t….. creates the fastest abrasives velocity….creates the highest frictional heat….blast into blind holes and pneumatically pushes abrasive through cross drill holes.

• Blast using light plastic abrasives or heavy steel shot, steel grits and all the other standard abrasives like glass beads, aluminum oxide, silicon carbide • LED Lighting • Boron Carbide Nozzle, • Large 24” ClearView Operator Window • Air Velocity Window Sweep for better visibility • Clean, Strip, Peen using all abrasive types • Also includes many more Standard Features not listed

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 12

Shown with optional Turntable

JAMISON: your best source for

Automotive Shop Equipment Hines HC-500 Digital Crankshaft Balancer

Peterson Berco 260A Crankshaft Grinder

$17,500

$12,000

CCP Pressure Tester Model 50RL

Kansas Instruments SM7500 Wet Mag Cabinet

$4,250

Van Norman FG5000 Flywheel grinder

$3,500

Kwik Way 041 Valve Guide & Seat Machine

Delta Custom Tools

$6,900

$2,995

We are Authorized Dealers for the following lines of parts & equipment:

Look to AXE

PO Box 276 • 1908-11th Street, Emmetsburg, IA 50536 • Fax: 712-852-3570

800-841-5405

www.jamisonequipment.com 13

14

TRADER MAGAZINE Spring 2019 trader-mag.com

Comec ACF200 Cylinder Boring/Milling Machine Call us at:

(888) 440-9429 or (800) 522-9429 bakerequip@joebakerequipsales.com www.joebakerequipsales.com

trader-mag.com Spring 2019 TRADER MAGAZINE

15

Automotive Production Dominator Siphon This 100% welded 12 and 14-gauge steel Production Siphon Blaster includes the patented bolt-on internal abrasive separator reclaimer and a long list of included standard features for use with any abrasive 0-150 mesh and gun sizes 25 to 90 cfm.

Three standard cabinet models 3636, 4836 and 4848 all with 36” cabinet heights and side mounted dust collectors for space saving footprint.

• 13”X 24” Large view window • LED Lighting • 10” work ports • Fast Cleaning Siphon Delivery for easy operation and low maintenance • Gun Sizes to 90 cfm for highest frictional heat and fastest cleaning • Quickly remove rust….paint…. carbon….heat discoloration and more using high frictional heat to decrease cleaning time • Space Saving Side Mounted Dust Collector with 700 cfm blower • 220 sq’ MERV Tested Cartridge Filter • Many Part Handling Options Available • Optional HEPA After Filtration for Cell Machine Operations available • Pneumatic Dust Collector Cleaning • More Included Standard Features than any other manufacture of abrasive blasting cabinets in today’s market

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 16

TRADER MAGAZINE Spring 2019 trader-mag.com

17

18

TRADER MAGAZINE Spring 2019 trader-mag.com

trader-mag.com Spring 2019 TRADER MAGAZINE

19

20

TRADER MAGAZINE Spring 2019 trader-mag.com

trader-mag.com Spring 2019 TRADER MAGAZINE

21

22

TRADER MAGAZINE Spring 2019 trader-mag.com

ABS 20 Ton Power Hydraulic Floor Shop Press Ideal for heavy metal installation, removing & installing bearings, bushings, balancers and more!

• Load capacity: 20 ton • Overall height: 61.5" • Table height is adjustable in 5" increments • Working Height 1” to 44.5” • Slide in Press Plate Included • Convenient foot operated air/hydraulic motor • Sliding head allows for offset pressing • Heavy-duty H-frame constructed of highgrade steel

Accessories Included

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 23

24

TRADER MAGAZINE Spring 2019 trader-mag.com

ABS CRANK POLISHERS - 3 SIZES This one is going to Midstream Operations in Colorado. How about yours?

FEATURES:

• Polishes crankshafts up to 55˝ • 2-1/8˝ belt • Aircraft aluminum drive wheel & idlers • Steady rest for doing heavier diesel cranks • 5˝ Chucks • Available to handle up to 32˝, 42˝ & 55˝ center to center See our video at: youtube.com/absproducts

591 W. Apollo Street • Brea, CA 92821 ph (714) 671-0728 fax (714) 671-0836 email: absproducts@sbcglobal.net www.abs-products.com

Now Pressure Testing Is Not Just A Service For Your Customer It Also Makes Good Profit For Your Shop!

Precision surfacing that you can rely on to last many generations. Berco has 90 Never miss aof leak in an aluminum head, block plus years manufacturing quality or up to a 53” long diesel head. machines that last a lifetime!

Quick setup and immersion in heated water Join the thousands of shops that have opens up all leaks for a positive test.

experienced the quality of Berco, but nowrotation at an affordable price.

360º of heavy parts lets you see the exact position of leaks.

trader-mag.com Spring 2019 TRADER MAGAZINE

25

PROSIS PRO now offers direct links to select online parts catalogs MAxIforcE and rELIAncE have partnered with ProsIs Pro to offer all ProsIs users direct links to their online catalog within the engine specs page of ProsIs Pro. simply click on the “Parts & suppliers” tab for fast and easy access to the parts for the engine you’re working on!

www.prosispro.com www.aera.org

facebook.com/aeraep

twitter.com/aeraep

THE SOURCE FOR INFORMATION P h one 888-326-2 3 7 2 or 815- 526- 7600 Fax 888-329-2372 or 815-526-7601 • EMAIL info@aera.org

26

TRADER MAGAZINE Spring 2019 trader-mag.com

instagram.com/engineprofessionalmag

THE FINISH LINE ABS carries over 100 different styles and sizes of belts to meet all of your finishing needs!

Soft Back•Diamond•Micro Finish•Hard Back•Cork•Scotch Bright

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts trader-mag.com Spring 2019 TRADER MAGAZINE

27

28

TRADER MAGAZINE Spring 2019 trader-mag.com

STANDING ON THE GAS SINCE 1963.

Mickey Thompson was unstoppable. He was the first American to 400+MPH at Bonneville & the manager of Lions Drag Strip. At heart, Mickey was a drag racer, now his DNA lives on in the innovative winning products we build today while we continue to break records in professional drag categories.

UNCOMPROMISED CONSTRUCTION / UNDISPUTED PERFORMANCE. #MICKEYTHOMPSONTIRES M/T PROUDLY MAKES TIRES IN THE USA.

MICKEYTHOMPSONTIRES.COM trader-mag.com Spring 2019 TRADER MAGAZINE

29

PowerPeen Direct Pressure Blast Cabinet Optional Mobile Work Cart shown with Polyethylene Turntable, Outside Tracks and Door Modification Optional Rubber Cabinet Liners, Operator Platform with Double Steps.

The ABS Products PowerPeen Direct Pressure Blast Cabinet comes in many different cabinets sizes including 60x60x48H model, choose the one right for your application. If you need a Direct Pressure for Plastic, Glass Beads, Aluminum Oxide, Steel Shot/Grit or any abrasive type between 20 to 120 mesh the Power Peen is the right machine for the job saving dollars on the purchase. It includes a long list of standard features and access to a longer list, almost eighty, of optional features to make blasting the part and machine maintenance easy and simple. Patented Separator Reclaimer sends the spent abrasive and dust into the 220 sq.ft. cartridge dust collector complete with hopper dust storage and pneumatic vibrator cleaning cycle. Advanced LED lighting, window sweep, ASME Coded 1.0 cubic foot pressure pot, MERV tested filter cartridge, operator platform and heavy duty bar work grates and more are all included. Add an optional Mobile Work Cart making quick work of loading hard to handle large parts. Call for added information on the machine and options. 714-671-0728

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 30

TRADER MAGAZINE Spring 2019 trader-mag.com

Power Peen Direct Pressure Included Standard Features • 13” x 24” window with protector • Window sweep • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • LED advanced lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning vibrator • HD bar work grates • MERV tested cartridge, 220 sq.ft.

• Dust storage hopper, 1-1/2 c.f.

• 1.0 c.f. pot capacity • Operator platform included • Boron Carbide Nozzle

Handheld Polisher A Must Have!

This is a must have polisher for machine shops, motor rebuilders, hydraulic rebuilders, motor and engine repair shops. Makes polishing your crank, cam and rack & pinion shafts simple, easy and cost effective. Comes with premium Baldor motor for long life, Reinforced aluminum frame for ease of operation, Long Lasting Ball Bearing rollers which accommodate ¾” to 2” wide belts. Available in 64” or 72” models.

Contact our sales team today!

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

31 31

JACK SCHOLLER EQUIPMENT

USED EQUIPMENT

CRANKSHAFT GRINDERS Berco RTM 300 Crankshaft Grinder - 94”, Arnold Gauge, Dresser, 2 Steady Rest,................................................... $25,000.00 4 Wheels & Hubs (Used as Roller Grinder) Reconditioned Storm Vulcan 15C Crankshaft Grinder with Chucks, Standard Equipment, .............................................................. $10,000.00 including 4-Wheels & Hubs Berco Hubs for 225 & 270.................................................................................................................................................. $275.00 Storm Vulcan 150 Crankshaft Welder............................................................................................................................. $6,000.00

GUIDE & SEAT MACHINES Winona PH6000 Guide & Seat Machine......................................................................................................................... $3,750.00 Peterson TCM25 Guide & Seat Machine with 180 Degree Fixture.............................................................................. $4,500.00 Peterson TCM25 Guide & Seat Machine with 360 Degree Fixture............................................................................... $5,500.00 Peterson TCM25 Guide & Seat Machine - Variable Speed with Air Lock Fixture........................................................ $6,500.00 DCM HMC2000 Guide & Seat Machine.......................................................................................................................... $6,500.00 Kwik-Way 019 Head Shop.............................................................................................................................................. $3,500.00

PRESSURE TESTERS Master Tool PT48 Pressure Tester with Power Rollover................................................................................................ $4,500.00 Delta Pressure Tester, 15” Width, Standard Tooling...................................................................................................... $4,500.00 Master Tool Pressure Tester - 38”.................................................................................................................................. $3,500.00 Peterson PT38 Pressure Tester...................................................................................................................................... $3,500.00 Master Tool Head Oven................................................................................................................................................... $1,000.00

VALVE GRINDERS Winona 860900 Valve Grinder......................................................................................................................................... $3,500.00 Kwik-Way SVS Valve Grinder.......................................................................................................................................... $2,500.00 Sioux 2075 Valve Grinder................................................................................................................................................ $2,500.00 Sioux 2001 Valve Grinder................................................................................................................................................ $2,000.00

SURFACE MACHINES Van Norman 570 Broach, 2 Speed with Flywheel Grinder Attachment........................................................................ $2,500.00 Peterson 48A Dry Surfacer with Filter Cabinet.............................................................................................................. $1,200.00 RMC12 Surfacer with CBN........................................................................................................................................... $14,500.00

ROD HONES, ROD BORING, CAP GRINDERS, ROD HEATERS Sunnen 1699 Rod Hone.................................................................................................................................................. $2,500.00 Peterson CG87 Cap Grinder........................................................................................................................................... $1,800.00 Sunnen CRG750 Cap Grinder......................................................................................................................................... $1,000.00 Sunnen 1299 Rod Hone.................................................................................................................................................. $2,500.00 RMC-70 Cap Grinder with Heavy Duty Factory Table................................................................................................... $2,500.00 Sunnen Rod Hone Cabinet................................................................................................................................................ $500.00 Sunnen CRH-50 Connecting Rod Heater.......................................................................................................................... $750.00

CYLINDER HONE - LINE HONE Sunnen Line Hone Mandral - 15RY4500........................................................................................................................ $2,000.00 Hone Master Cylinder Hone - Manual............................................................................................................................ $1,200.00

FLYWHEEL GRINDERS Peterson FG24 Flywheel Grinder.................................................................................................................................... $4,500.00 Winona FG5000 Flywheel Grinder.................................................................................................................................. $4,000.00 DCM Flywheel Grinder.................................................................................................................................................... $3,500.00

Office: 704-924-6803 Jack: 704-906-7980 Sterling: 717-377-1587 Scott: 404-488-4378 32

TRADER MAGAZINE Spring 2019 trader-mag.com

157 Wedgeway Drive • Statesville, NC 28677

BORING BARS Kwik-Way FWS II Boring Bar with Tool Box................................................................................................................... $3,750.00 Kwik-Way FS Boring Bar and Tool Box.......................................................................................................................... $3,500.00 Berco ACP 151 A/M Cylinder Boring Machine, 45 & 30 Degree Fixtures..................................................................... $8,500.00 Tool Sharpener, Standard Tooling Waida 02 Boring Bar - No Tooling.................................................................................................................................. $1,500.00 Kwik-Way FL Boring Bar with Standard Tooling & Tool Box......................................................................................... $4,500.00 Kwik-Way 1291 Stand..................................................................................................................................................... $1,200.00 Kwik-Way FN Boring Bar with Standard Tooling & Tool Box......................................................................................... $3,500.00 Kwik-Way FN Boring Bar with Air Float Table, Standard Tooling & Tool Box............................................................... $5,500.00 Waida 01 Boring Bar with Tool Box................................................................................................................................ $1,800.00

CLEANING EQUIPMENT Trinco Glass Bead Machine & Filter - 48 x 24............................................................................................................... $1,250.00 RMC Rinse Booth with Turntable................................................................................................................................... $1,600.00 Empire Glass Bead Cabinet - 48 “ x 48”........................................................................................................................ $1,800.00 RMC Steel Shot Machine................................................................................................................................................ $3,500.00 Bayco Oven BB-12.......................................................................................................................................................... $3,500.00 Us Metals Oven............................................................................................................................................................... $1,500.00 Peterson BK17 Oven....................................................................................................................................................... $1,500.00 Peterson SC2233 Spray Washer, Gas............................................................................................................................ $2,750.00 RMC Glass Bead Machine - 48 x 24............................................................................................................................... $1,200.00 RMC Head Oven.............................................................................................................................................................. $1,000.00 US Metals Tumbler.......................................................................................................................................................... $1,000.00 Gray Mills Parts Washer..................................................................................................................................................... $250.00 KI Parts Tumbler

MISCELLANEOUS Ammco 4000, 4100, 3000, 7000 Drum & Disc Lathes...............................................................................................Call for Price 6 - Air Compressors...................................................................................................................................................Call for Price New Dowell Pin Puller Set.................................................................................................................................................. $175.00 New Piston Pin R & R Set.................................................................................................................................................. $175.00 New Sioux Tapered Pilots.................................................................................................................................................... $37.50 Diamond Flywheel Stones................................................................................................................................................. $175.00 New - Portable Crankshaft Polisher.................................................................................................................................. $795.00 Sioux Seat Grinding Stones - 1-1/8” through 1-1/2”............................................................................................................ $8.95 Sioux Seat Grinding Stones - 1-9/16” through 1-15/16”...................................................................................................... $9.50 Sioux Seat Grinding Stones 2” through 2-1/2”................................................................................................................... $10.50 Sioux Seat Grinding Stones 2-3/4” through 3-1/4”............................................................................................................ $17.50 Kwik-Way Seat Grinding Stones - Same Sizes and Prices as Sioux Sunnen Rod Hone Mandrals - CR, PL, KL, LJ, 4UL Series......................................................................................Call for Price Nugier 40 Ton Press........................................................................................................................................................ $2,500.00 Nugier 100 Ton Press...................................................................................................................................................... $7,500.00 Sioux Work Bench with Sioux Seat Driver & Sioux Stone Dresser............................................................................... $1,250.00 Jib Crane - 84” - NEW..................................................................................................................................................... $2,000.00 Electric Hoist - NEW........................................................................................................................................................ $1,400.00

email: jackschollerequipment@roadrunner.com

www.jackschollerequipment.com trader-mag.com Spring 2019 TRADER MAGAZINE

33

Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing.

Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments.

Works great will all degree wheels through 16” or larger depending on the mounting hole.

3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ----------- $495

18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings.

Part #ST-DegreeWheel-18 -------------------- $225.00 Pointer ------------------------------------------$60.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

34

TRADER MAGAZINE Spring 2019 trader-mag.com

PERFECTLY ROASTED with a hint of

VANILLA “Discover A carefully smooth blend of

Arabica organic beans”

www.rocknrollcoffeeco.com 35

GET CLEAN PARTS

The UltraSonic LLC Way!

The Block & Head Cleaners

New Dual Program Selection!

Ultra 3800FLT Lift Table with Agitation 115 gallon (435 liter) Capacity 38.5” Tank Length

STANDARD FEATURES • Digital Touch Controls • Dual Filtration System with Weir Tank • Opposing Horizontal Transducer Cleaning • UltraSonic clean from TWO directions • 7 Day Heat Timer • Insulated Tank and Lid • Stainless Steel Construction • Movable Basket • Automatic Cycles

Ultra 3200FA Agitation with Oscillation 65 gallon (246 liter) Capacity 32.75” Tank Length

ultrasonicllc.com 513-502-9746

CINCINNATI, OHIO youtube.com/ultrasonicllc 36

TRADER MAGAZINE Spring 2019 trader-mag.com

info@ultrasonicllc.com

GET CLEAN PARTS

The UltraSonic LLC Way!

Small Parts Cleaners Ultra 2100M Economy Head Cleaner 13 gallon (50 liter) Capacity

Lifter Cleaner 1.1 gallon (4.5 liter) Capacity

• Stainless Steel Construction • Movable Basket

Carb/Injector Cleaner

THE SHOWCASE MACHINE!

NEW!

• Manual Controls

Ultra 1300M

NEW!

Ultra 1000M

STANDARD FEATURES

4 gallon (15 liter) Capacity

SAV

E 2 0 on ON % LI Orders NE

Visit our Store to receive the Discount

ultrasonicllc.com 513-502-9746

CINCINNATI, OHIO youtube.com/ultrasonicllc

info@ultrasonicllc.com trader-mag.com Spring 2019 TRADER MAGAZINE

37

Pollution Control Workstations

$7,900

.00

Pollution Control Workstations PCE-4736

47˝ W x 36˝ D, 440 sq. in. filter, removable dust pan, fiberglass grate, plexiglas enclosed top that swings up out of the way for loading, swings down to keep particles out of shop, single motor on the back 3/4 HP @ 750 cfm.

Move up to 2HP, 1100 cfm blower.

Upgrade from ABS-4228, this is the latest pollution control workstation from ABS Products.

This machine is a must in today’s market where you are working with plastic, fiberglass and carbon fiber that you have to keep out of your lungs.

See More Pollution Control Workstations and many other products: www.youtube.com/absproducts 591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com 38

TRADER MAGAZINE Spring 2019 trader-mag.com

Downdraft Tables with Turntables We are delivering 3 new Downdraft Tables with Turntables to LKQ/Amada of Texas for blowing off blocks and deburring parts.

Downdraft 36’ turntable, 2 HP, 1150 CFM for blowing off parts, 440 square feet of fire retardant air filters, non-scratch plexiglass, new-style metal frame.

CALL TO ORDER YOUR CUSTOM SOLUTION TODAY!

714-671-0728

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

trader-mag.com Spring 2019 TRADER MAGAZINE

39

Multi-Abrasive 2-station Blasting Cabinets for Production Engine Rebuilders!

PowerPeen 6048

We built this super-flexible two-station blasting system for Gary Kehrer at Platinum Performance Group in Sunnyvale, TX. Gary works on aircraft engines such as the Lycoming prop engine cases pictured above. There is also a photo of the welded steel tubing that works as an engine mount to hold those engines in.

They are stripped down to remove paint and magnafluxed, Gary’s shop does it all.

He also works on Continental flat 6’s, race boats, aluminum magnesium heads from different manufacturers.

Shot peening, plastic media, glass bead, all runs through this versatile production quality machine.

If you run a large production shop like Gary’s we have the custom blasting machines you need.

This makes an EXCELLENT shot peening cabinet for diesel cranks or anything!!!

Tools for Performance Racing Engine Builders 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

40

TRADER MAGAZINE Spring 2019 trader-mag.com

Excellent maching for shot peening cranks!

In fact that’s what we designed it for!

The welded steel tubing that works as an engine mount Lycoming prop engine.

Lycoming prop engine cases on turntable and dolly system, entering the blaster.

Nozzles for shot peening, blasting and plastic media!

• A2 tool steel • Heat treated to 80 Rockwell • 6” x 1/2” OD 90 degree nozzle • 5” x 1/2” OD straight nozzle • 3” x 1/2” OD straight nozzle • 4-1/2” x 3/8” OD 90 degree nozzle • 3” x 3/8” OD straight nozzle

Each nozzle: $250.00 Full set: $1250.00 trader-mag.com Spring 2019 TRADER MAGAZINE

41

THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized & your stock safely stored!

CH-1 Crank Rack

CH-1 Crank Rack with optional top, V-blocks and one cam hanger.

CH-2 Double Crank Rack

CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level.

Each level holds between 20-24 cranks depending upon the model.

ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)................................... $149.00

Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory.

This is a rack for every crank.

SAVE MONEY AND FLOOR SPACE!

2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack

591 West Apollo Street • Brea, CA 92821 phone 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

42

TRADER MAGAZINE Spring 2019 trader-mag.com

System on Best Storage the market!

Can Be Arbors perately!

Se Bought

Mill Mounted Drilling Platform

ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks.

Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)

ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments

$149.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

ABS-Products.com Call 714-671-0728

Drilling Platforms for Hines & Winona Balancers

Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert.

Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.)

CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack.

CR-ES-3 ............................................................................. $95.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.

Tools, Equipment, Machines for Engine Builders & Rebuilders trader-mag.com Spring 2019 TRADER MAGAZINE

43

3030 PowerPeen Industrial Direct Pressure Each abrasive delivery method (siphon and direct pressure) has its own “best applications” just like engines open to atmosphere and engines using boost to overcome one atmosphere. Each model also has its best application for the cabinet size; one size does not fit all! The PowerPeen 3030 is the smallest cabinet size in a seven cabinet lineup. The 3030 is a compact size with all the features included making it an Industrial Direct Pressure Cabinet in a smaller package.

Use for shot peening quick replacement parts or use for glass bead, plastic and all the other media types.

Standard Features • 13” x 24” window with protector • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • Advanced LED lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning • Bar work grates • MERV tested cartridge, 220 sq.ft.

• Dust storage hopper, 1-1/2 c.f.

• 1.0 c.f. pot capacity, Charger model • Operator platform Included • Boron Carbide Nozzles

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 44

TRADER MAGAZINE Spring 2019 trader-mag.com

5.0 CRANK&CAM POLISHER

Over 50 years of polisher manufacturing experience and we never stop improving our products. Our new 5.0 versions make cleaning and micro polishing crankshafts, camshafts and rack & pinion shafts fast and easy. With variable speed control, spring loaded polishing belt arm for quick and easy belt changes, heavy duty, long lasting frame and components.

///////////////////////////////////////////// Please contact us for a spec sheet and pricing.

Many types of shafts and cylinders can also be polished on our machines. Standard sizes are 32”, 42” and 48” centers. Custom sizes also available upon request. /////////////////////////////////////////////// Crankshaft Polisher (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Camshaft Polisher 45

The Hurricane Wet Blast Machine, For A Finer Finish Media Blast manufactures more than 170 standard models and sizes of blasting cabinets with over 80 optional features for increased productivity, durability, and operator safety. Our extensive line of Wet, Dry, Siphon and Direct Pressure blast cabinet models includes specialty machines for automotive, aerospace, military, precision focused micro blasting, plastic stripping, soda blasting, tumble part processing and shot peening. Cartridge dust collectors, HEPA after filters and separate standing timed reverse pulse cleaning dust collectors are included as standard sandblasting equipment or available option upgrades. The Hurricane Wet Blaster has many applications in the automotive field to include 3-D printing, processing wheels, chemically clean part surface, zero abrasive embedment and the elimination of frictional heat capable of damage and part distortion.

Standard Features • Stainless Steel Cabinet • Seal-less Slurry Pump • 25 to 28 % Abrasive Suspension for faster processing • Negative Pressure Cabinet with Mist Collector Blower and Filter • LED Cabinet Lighting • Positive Locking Window Seal

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com

46

TRADER MAGAZINE Spring 2019 trader-mag.com

trader-mag.com Spring 2019 TRADER MAGAZINE

47

ALL NEW, Pro G/S The Pro G/S is a more compact cabinet using smaller amounts of compressed air designed for shops with limited floor space and smaller part volumes. The Pro G/S was designed specifically for use with Grit and Shot or combinations of the two. Applications Finishes and Camouflage Repairs. The included casters allow the machine to be rolled into position,used, and then moved to a stored location.

Attached Dust Collector

FEATURES & BENEFITS • Duplicates Original Factory Finishes • Camouflage Surface Repairs • Reaches Down Into Deep Cylinder Ports • Compact Footprint with Casters • Negative Pressure 100% Welded Dust Collector • 90 sq. ft cartridge filtration • Semi-Automatic Dust Collector Vibrator Cleaning Cycle • Advanced LED Lighting • ASME Coded Pressure Pot with Access Port • LG. 13X24” view window

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 48

TRADER MAGAZINE Spring 2019 trader-mag.com

BY ABS

Built for PERFECTION E n g i n e B u i ld i n g To o l s

Piston Deck Height Bridge

Piston Ring Squaring Tool

Check the piston height easily, adjustable mounts move to fit any size bore, adjustable gauge mount to zero the gauge where you want. A must have tool when calculating piston deck clearance. Includes gauge and can also be used to measure flywheel step height.

Fast, easy and repeatable fixture for squaring rings in the bore prior to setting end gaps.

Two sizes, RG-RST covers bores from 2.000” to 5.000” and RG-RST-D covers bores 5.000” to 8.000”. Places rings 1.000” below the deck to get pasthead bolt distortion.

• No wrenches required • Change bore sizes in seconds!

Precision V-Blocks 714.671.0728 abs-products.com sales@abs-products.com youtube.com/absproducts

For precision keyway milling and cross drilling cranks. Consists of V-Blocks, hold down bars, nuts, T-nuts and locators.

Fits most milling machines.

trader-mag.com Spring 2019 TRADER MAGAZINE 49

GARAGE AND SHOP ORGANIZERS The Pioneer Steel line of high quality garage and shop organizers meet the high standards you demand for your shop or garage. These new products are a great way to store and organize those loose items and will give your garage, shop or enclosed trailer a cleaner look. Pioneer Steel now has exactly what you need at an affordable price. Over 30 sizes and styles to choose from; made of high quality steel and available in white, red or black durable powder-coat finish. MOUNTING HARDWARE INCLUDED!

2 ROW AEROSOL CAN HOLDER Capacty: 8 cans

2000W 2000R 2000B

SMALL OIL BOTTLE SHELF Capacty: (6) 1 QUART BOTTLES

2010W 2010R 2010B

SMALL AEROSOL CAN RACK Capacty: 6 cans

2002W 2002R 2002B

LARGE OIL BOTTLE SHELF Capacty: (12) 1 QUART BOTTLES

2014W 2014R 2014B

LARGE AEROSOL CAN RACK Capacty: 12 cans

2006W 2006R 2006B

COMBINATION STORAGE SHELVES

2016W 2016R 2016B

PHONE: (714)255-0526 • FAX: (714) 257-0184 50

LARGE OIL BOTTLE HOLDER Capacty: (8) 1 QUART BOTTLES

2008W 2008R 2008B

LOCKABLE ORGANIZER WITH STORAGE SHELF

2022W 2022R 2022B

TOOL BOX

R103

TOOL BOX

HR19

TOOL BOX

R1182-02 R1182-03

PIONEER STEEL CO.

sales@pioneersteelusa.com

trader-mag.com Spring 2019 TRADER MAGAZINE

51

Selling Machine Shop Piece by Piece Located in Oregon

Lubrite Processing Unit, ‘Duralube’

On a Main Street in Springfield Oregon. In business for 35 years Please contact Jeff for more info: Jeffccaldwell@aol.com phone: 541-914-6490 ___________________________________________________

Storm Vulcan Model D-9 Factory Rebuilt to as new condition. Never used. Serial #D9-275 Power: 220V 1Ph 54.5A $7199.00 Email for photo’s: danton@aptfast.com Riverside, California 800-278-3278 _____________________________________________________

High Performance Machine Shop & Auto Parts Strategically located in north-central Virginia with no competition within 40 miles in all directions. This full service business provides the new owner exceptional growth potential. Currently building and selling top quality high performance engines, trans and rear-ends for retail and wholesale markets for over 40 years.

Interested buyers inquire by phone: 540-840-0069 or e-mail: bcauto69@bcauto69.net ___________________________________________________

Bob’s Machine Shop The best automotive machine shop for sale in Southern California.

Cylinder head rebuilding and engine rebuilding as well as auto parts. 50 years in business, owner wants to retire age 76. Caters to automotive dealer programs.

If interested, text: 818-391-3453 I’ll call you back. ___________________________________________________

Shop Equipment for Sale: 2: CRG-500 capgrinders/ 3: Sunnen rod hones SF7100 SuperFlow dyno absorber/cart w/misc $13K RTM Berco 225 crankshaft grinder reconditioned & aligned $8K QT-300 SimTest machine $3K KwikWayFN cylinder boring-bar $3K Stewart Warner 2000 balancer w/V8 bobweights $2K VanNorman boring stand $1K Ferndale, Michigan Adney Brown 586-549-7557 Currently accepting resumes for skilled crankshaft grinding staff.

Email resume to sales@performancecrankshaft.com ___________________________________________________ Shop Equipment for Sale in CA Axe Pressure Tester & 2 Wahers, Balance Technology Balancer, Magnaflux IV 60 Wet Mag, Sunnen CK10, LRG 750, LBB1810, VR6500, HS40 Head Station, NEWEN G II Valve Seat Machine, Rottler F2B, RMC10 CBN/PCD, Winona Flywheel Grinder, Viking Oven, Zero Pulse Air Blaster, specialty tools, inventory. $95,000 OBO 805-965-8541, Tobysengineparts@cox.net

NEWEN TRAINING 101 This is a 2-3 day class taught at your facility. Training is for programming and operating a NEWEN BB or EPOC machine.

My name is Charlie Lawlor I have over 12 years’ experience, 20,000 hours and have taught 150 people all over the world on how to operate these machines. I worked with NASCAR, NHRA, FORMULA ONE race teams, worked with industrial machines, engine rebuilders and motorcycle race teams.

NEWEN 101 Classes include: • Setting up machine • Updating software • Basic programming • Designing both standard valve seat profiles and performance valve seat profiles • Valve seat removal • Offset seat programming and design Note: I am a private contractor, not affiliated with NEWEN USA Contact: 480-282-3472 or charlie@motorcyclemachine.com _______________________________________________________

Shop Equipment for Sale: DCM Tech HB 3800, Surfacer with stair step clamping fixture, block fixtures and cutters................................................................18,995 NEWEN G11. W/ Rollover fixture, vacuum tester and complete tooling.......................................................................22,999 AXE TB-10, Parts tumbler w/spare basket and media.......................1,299 Peterson, RG-1203, Belt sander/platen grinder.................................2,995 DELTA Pressure tester, #6000 w/7 plates and cart w/accessories...................................................................................2,499 ABS, PC425-1. Downdraft cabinet....................................................2,995 ULTRASONICS Parts cleaner, 35 x 22................................................2,400 SUNNEN, TS-100, Tool sharpener.........................................................630 SUNNEN, HS-60. Guide sizing and seat repair bench........................3,300 SUNNEN, P310, Valve guide dial bore gauge........................................795 ABS, Camshaft/valve stem polisher...................................................2,995 Tig welder, L-Tech, 300 AMP, 60% duty cycle w/ liquid cooler............ 1,800 baltheadworks@verizon.net 410-781-7272 Cell 410-876-5050

Advertise now in the Trader Classifieds, Call: 714/ 671-0217 www.trader-mag.com 52

TRADER MAGAZINE Spring 2019 trader-mag.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

53

The Ultimate Piston Fixtures Jaws can be sold separately for any ring width: 3/16˝ down to .5 mm!

10” Tilting Rotary Table with 8” Chuck & special Piston Jaws

Standard ABS Piston Fixture

See the video: YouTube.com/absproducts Special Diesel Jaws for 6”& 8” Chuck

Special Chuck for Machining Sleeves

Jaws available for 6” & 8” chucks.

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

IMPORT TUNERS & MOTORCYCLE BUILDERS: We have many new jaws for small bore motors!!!

7-1/2” Blank Piston Fixture Jaw: We machine this to fit YOUR ring groove! Or you can purchase blanks and machine yourself.

Available for 6” and 8” chucks as well. www.performancetradermagazine.com

54

TRADER MAGAZINE Spring 2019 trader-mag.com

trader-mag.com Spring 2019 TRADER MAGAZINE

55

N-200 Stage II Soda Blaster Using GhostFlow™ Technology

STANDARD MACHINE FEATURES • Three (3) Cabinet Sizes • 36x36, 48x36 & 48x48 (w x d) • 13” x 24” ClearView™ Window • Easy Clean MERV Tested Cartridge Filter • Pneumatic Vibrator Dust Collector Cleaning Cycle • Reverse Pulse Dust Collector Cleaning Cycle • 700 CFM Blower w/ Silencer • Easy to use Soda Pressure Generator with Control Panel • ASME Code 0.8 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 9 to 22 CFM Soda Nozzle • Large Side Access Door • Pneumatic Soda Feed System

The N-200 Stage II Soda Blasting Cabinet is one of the most popular of the NEW Soda Models using larger cabinets and larger dust collector sizes.

This allows the user to operate longer hours and access other part handling options important to soda blasting applications.

This is a great choice for cleaning many automotive parts like automotive heads when you want the original finish and a soluble abrasive to eliminate any abrasive residuals.

The Patented Separator Reclaimer prevents 95% of the used soda from transferring into the dust collector. This unique design allows longer daily machine operation and more daily part production.

Downdraft Cabinet Airflow using GhostFlow™ Soda Delivery Technology and Used Soda Dropout are what make ABS Products the leaders in soda cabinet technology.

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

56

TRADER MAGAZINE Spring 2019 trader-mag.com

Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head!

1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 5. Easy 6. Profitable

714-671-0728 abs-products.com

VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00

VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 VT-2500-4500-F 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting ............$21.80 VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting ......................$21.80 VT-3000-4000 3”x 3” pad without fitting ......................$21.80 VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 VT-3000-4000 3”x 4” pad without fitting ......................$22.80 VT-6000-6000 6”x 6” pad without fitting ......................$24.95 VT-3-TP 11”x 35” table pad for VT-3 ...................$62.95 VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 VT-SP-14 14 mm spark plug adapter ....................$39.00 VT-SP-18 18 mm spark plug adapter ....................$49.00 VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 GA-LG Liquid filled gauge .................................$80.00 VT-3-H 1/4” vacuum hose ..................................$39.00 VT-RV Release valve ..........................................$42.00 VT-TA Table adapter .........................................$10.00 VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 VT-3-P 3 CFM pump .........................................................$328.98 VT-5-P 5 CFM pump ........................................$475.00

Bob Weight Cards - 100 cards per pad, perforated - Part# BW-5099C $30.00

trader-mag.com Spring 2019 TRADER MAGAZINE

57

FOR SALE Superflow 902 Pro Engine Dyno 2500 HP complete w/pumps & tank $ 28,500.00 Superflow 600 flow bench with flow com. digital motor controller w/toolings $7500.00 Berco 151Bore Machine V/8 & V/6 setup & all tooling $7500.00 BHJ O Ring fixture B B Chevy BHJ Block True BHJ Lifter True Base Kit BHJ Lifter True B B Chevy BHJ .800 to .960 core drill & .842, .903 1” reamers 400 cfm Air Com. Dresser w/ 25 HP motor & 200 gallon air tank Storm Vulcan 15 Special crank grinder 5 wheels CALL QUINCY PROCELL: 409-886-0545 Email: neprocell@gmail.com

58

TRADER MAGAZINE Spring 2019 trader-mag.com

COBRA STAGE I SODA BLAST CABINET

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com Spring 2019 TRADER MAGAZINE

59

Get Abrasive!

ABS Blasting Media Abrasives for all Applications.

Cleaning parts, removing paint, powder coating, surface blending or surface preparation, ABS has the right type of blasting media for all your needs. We keep a wide variety of types and sizes in stock.

Give us a call to discuss which abrasive will work best with your application and machine.

BAKING SODA PLASTIC MEDIA

STEEL GRIT

ALUMINUM OXIDE

STEEL SHOT

(714)671-0728 ABS-Products.com sales@abs-products.com info@ abs-products.com youtube.com/absproducts 60

GLASS BEADS

36˝ x 36˝ Special Shot Peening System w/ track

ABS Products Dual Shot Peener - N440 • • • • • • • •

36” x 36” shot peener with track and turntable designed to be moved by forklift, run on 110V, be portable 10” arm holes large window rubber lined interior lighting top of the line!

Small step available!

We make these up to 60” x 60” and larger! Call us for your custom shop needs!

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

trader-mag.com Spring 2019 TRADER MAGAZINE

61

Update your Piston Ring Grinder to an ABS Ring Grinder!

START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs.

We have what you need for any type of ring!

Complete with Micron Disk Micron Disk, 1 - 4” Turntable ---$1,455.00 Micron Disk, 1 - 5” Turntable ---$1,555.00 Micron Disk, 1 - 6” Turntable ---$1,655.00 Diamond or Borzon Disk ----------$325.00

New Scotch Brite Buffing Wheel RG-5953 -----$10.50 ea.

New Felt Buffing/Deburring Wheel RG-5952 ---$14.75 ea.

New Stick-On Disks RG-5956 --------------10 for $50.00 12 pack of Micron Disks --------------------------$19.25 50 pack of Micron Disks --------------------------$65.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts 62

TRADER MAGAZINE Spring 2019 trader-mag.com

$190.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts trader-mag.com Spring 2019 TRADER MAGAZINE

63

64

TRADER MAGAZINE Spring 2019 trader-mag.com

trader-mag.com Spring 2019 TRADER MAGAZINE

65

66

trader-mag.com Spring 2019 TRADER MAGAZINE

67

68

TRADER MAGAZINE Spring 2019 trader-mag.com

 �

Â?Â?

�� �

Â? ­€Â? ‚ /ƒ  Â? Â

�

Â

$48.00

Â?

�

Â

$59.00

�� � �

­

€ �

‚ �ƒ�

$30.00

�� � �

­

�

„ Â

$54.00

Â? Â

Â

MIX & MATCH

Buy 5 or more stones and take another

20% off

„ …† …

Â

Part No.

Size

CBN Sides

801120C

2.00�

FLARED

Â

… ­

801128C

3.00�

FLARED

Â

$197.00

863332C

4.00�

FLARED

Â

$199.00

801130C

6.00�

FLARED

Â

$220.00

801130CX

6.00�

FLARED

†

$220.00

801130D

6.00�

DIAMOND FLARED

$220.00

801105C

2.00�

STRAIGHT

General purpose, for cast iron & medium steel

$128.00

801106C

2.25�

STRAIGHT

General purpose, for cast iron & medium steel

$138.00

801107C

2.50�

STRAIGHT

General purpose, for cast iron & medium steel

$154.00

801108C

3.00�

STRAIGHT

General purpose, for cast iron & medium steel

$197.00

801130CG

6.00�

FLARED

Heavy graphite – Best for billet steel

$220.00

801123C

5.00�

FLARED

General purpose, for cast iron & medium steel

$210.00

801123CG

5.00�

FLARED

Heavy graphite – Best for billet steel

$210.00

Workpiece/Material

List

|

| @ Â Â? Â? Â? | Â Â? Â? Â?

trader-mag.com Spring 2019 TRADER MAGAZINE 69

70

TRADER MAGAZINE Spring 2019 trader-mag.com

Mention This Ad For A Special Discount

Balancing Slugs, Pins, Plates & Bars

Our heavy metal arrives finished, ready to install, oversized by .002-.003 for a precise press fit. We have the best quality, largest inventory and over 30 years experiences with heavy metal for crankshaft and chassis balancing.

Contact our sales team today!

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

• Hundreds of sizes in stock • Custom sizes available upon request • We can cut weld chamfers on any order trader-mag.com Spring 2019 TRADER MAGAZINE

71

EASY REFERENCE BALANCING CHARTS HEAVY METAL BALANCING WEIGHT GAIN CHART DIA. X LENGTH

72

CONVERSION CHART OUNCES TO GRAMS

TUNGSTEN

STEEL

NET GAIN

7/16" x .875" 1/2" x .750"

38 43

17 19

21 24

1/2" x 1.000" 1/2" x 1.200" 1/2" x 1.250" 5/8" x 1.000"

57 65 72 91

25 30 31 39

32 35 41 52

5/8" x 1.200"

109

47

62

5/8" x 1.250"

114

49

65

3/4" x 1.000"

122

56

66

3/4" x 1.200" 3/4" x 1.250" 7/8" x 0.500" 7/8" x 0.700"

147 162 87 117

67 70 38 54

80 92 49 63

7/8" x 0.750"

127

58

7/8" x 1.000" 7/8" x 1.100" 7/8" x 1.200"

169 186 198

7/8" x 1.250"

OZ

GRAMS

1/16

=

1.77

1/8 3/16

= =

3.54 5.31

1/4 5/16 3/8 7/16

= = = =

7.08 8.85 10.62 12.39

1/2

=

14.16

9/16 5/8 11/16

= = =

15.63 17.70 19.47

3/4

=

21.24

13/16

=

23.04

69

7/8

=

24.78

77 85 92

92 101 106

15/16 1

= =

26.55 28.35

210

96

114

2 3

= =

56.70 85.05

1" x 0.500"

111

50

61

4

=

113.40

1" x 0.700"

153

70

83

5

=

141.75

1" x 0.750" 1" x 0.850"

164 190

75 85

89 105

6

=

170.10

7 8 9 10

= = = =

198.45 226.80 255.15 283.50

11 12

= =

311.85 340.20

= = =

368.55 396.90 425.25

=

453.60

1" x 1.000"

227

100

127

1" x 1.100"

243

110

133

1" x 1.200"

265

120

145

1" x 1.250"

275

125

150

1-1/8" x 1.000"

282

127

155

1-1/8" x 1.200"

325

153

172

1-1/8" x 1.250"

350

160

190

1-1/4" x 1.000"

346

157

189

13 14 15

1-1/4" x 1.200"

418

189

229

16

1-1/4" x 1.250"

445

196

249

1-3/8" x 0.750"

328

142

186

1-3/8" x 1.250"

543

237

306

1-1/2" x .600"

304

135

169

1-1/2" x 1.000"

504

226

278

1-1/2" x 1.250"

635

283

352

TRADER MAGAZINE Spring 2019 trader-mag.com

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

Heavy Metal Checking Weights lf you’re tired of the guess work involved when balancing with heavy metal you need heavy Metal Tungsten Checking weights! Quickly and accurately establish the exact location and amount of heavy metal needed prior to drilling. our check ing weights fit securely between crankshaft counterweights al lowing the exact simulation of heavy metal. Get it right the first time everytime! available in 1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4” and 1-3/8” diameters in simulated lengths of 1.200” *made from steel

Part Number Item Description Price CW-100 Checking Weights - 1” Heavy Metal gms ................................................................................................................... 50.00 CW-1125 Checking Weights - 1-1/8” Heavy Metal....................................................................................................................... 60.00 CW-1250 Checking Weights - 1-1/4” Heavy Metal....................................................................................................................... 70.00 CW-1375-1250 Checking Weights - 1-3/8” Heavy Metal for 1.250” long pieces................................................................................... 80.00 CW-1375-750 Checking Weights - 1-3/8” Heavy Metal for .750” long pieces .................................................................................. 80.00 CW-500 Checking Weights - 1/2” Heavy Metal .......................................................................................................................... 30.00 CW-625 Checking Weights - 5/8” Heavy Metal .......................................................................................................................... 35.00 CW-750 Checking Weight - 3/4” Heavy Metal ............................................................................................................................ 40.00 CW-875 Checking Weights - 7/8” Heavy Metal .......................................................................................................................... 45.00 CW-PB Poor Boy Checking Weights - Coupler with bolt - Add Balancing Clay to make any size Chking Wt.................... 7.00

R8 Collet required for straight shanks: 7/16”, 9/16”, 5/8”, 3/4”, 7/8” $125.00 Morse Taper version available for same price

Heavy Metal Start-Up Kit “Get Started Installing and Balancing with Heavy Metal” Getting starled on anything is usually the hardest part, but with the Heavy Metal Start Up Kit you’ll be installing and balancing with heavy metal in no time. We’ve included all the necessary drills and reamers needed for the installation plus enough Heavy Metal for several balance jobs. And just so we could assist you in those balance jobs, we went ahead and included 20 Heavy Metal Checking Weights. These checking weights will enable you to accurately determine the precise amount and location (prior to drilling) where Heavy Metal is needed.

Heavy Metal Start-Up Kit comes with: (10) 1” x 1.200” pieces of heavy metal and (8) checking weights (10) 7/8” x 1.200” pieces of heavy metal and (8) checking weights (10) 3/4” x 1.200” pieces of heavy metal and (2) checking weights (5) 5/8” x 1.200” pieces of heavy metal and (2) checking weights (10) 1/2” x 1.200” pieces of heavy metal and (2) checking weights (2) 7/16” x 7/8” heavy metal dowel pins for Chevrolet (1) Drill bit in each of the following sizes: 31/32”, 27/32”, 23/32”, 19/32”, 15/32” (1) Reamer in each of the following sizes: 1”, 7/8”, 3/4”, 5/8”, 1/2” *specify straight shank or Morse taper when ordering Optional 3/4” straight shank to #3 Morse taper and adapter add $59.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

trader-mag.com Spring 2019 TRADER MAGAZINE

73

74

TRADER MAGAZINE Spring 2019 trader-mag.com

Over 50 Years of American Ingenuity & Craftsmanship

Balancing Supplies & Equipment • Polishing Equipment • Abrasive Blasting Equipment-Soda-Steel Shot-Plastic Beads Etc.• Ring Grinders • Crank Racks • Specialty Tools • Drilling & Milling Platforms • Measuring Tools & Devices 714.671.0728 • ABS-Products.com • sales@abs-products.com • youtube.com/absproducts

trader-mag.com Spring 2019 TRADER MAGAZINE

75

Blizzard Stage III Soda Blaster Using GhostFlow™ Technology

Production applications are what the Blizzard Stage III was designed for, if you have multiple daily shifts we offer dust collector upgrades to 880 sq.ft. with automatic timed reverse pulse cleaning that includes manual over-ride controls.

Clean any part down to the original finish and do it with a water soluble abrasive to eliminate any abrasive residuals and know the part has been unchanged.

95% of the used soda is collected outside the cabinet preventing it from entering the advanced easy clean dust collector with Automatic Timed Reverse Pulse Cleaning Cycle. The Blizzard also includes manual pulse over-ride controls for added cleaning. The Pneumatic Vibratory Cleaning Cycle is also standard allowing the user up to four ways to clean the dust collector to make sure it’s always clean.

STANDARD MACHINE FEATURES

• Four (4) Standard Cabinet Sizes 36x36, 48x36, 48x48 & 6060 (w x d) • 13” x 24” ClearView™ Window with Window Sweep • Easy Clean MERV Tested Cartridge Filters • Auto/Timed Reverse Pulse Dust Collector Cleaning Cycle with manual over-ride controls • Pneumatic Vibrator Dust Collector Cleaning Cycle • Magnahelic Monitor Gauge • 1100 CFM Blower w/ Silencer • Pneumatic Conveyor with 95% Used Soda Collection before the dust collector • Easy to use Soda Pressure Generator • ASME Code 1.0 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 10 to 22 CFM Soda Nozzles • Ergo Flexible Abrasive Hose • Pneumatic Vibrator Soda Feed System

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

76

TRADER MAGAZINE Spring 2019 trader-mag.com

30 Is Non-Destructive Cleaning Critical?

Remanufacturing Starts with ARMEX The first step in remanufacturing and rebuilding of engines, transmissions and other components is cleaning. ARMEX has answered the problem of ineffective and time-consuming cleaning processes by launching Re-Man XL, the first abrasive blasting media specifically formulated for the transportation remanufacturing and rebuilding industry.

Hard to clean contaminants are no match for Re-Man XL. With its extraordinary ability to quickly eliminate grease and oils plus the power to remove burnt-on carbon, light rust, gasket materials, coatings and grime all in one-step. Furthermore, Re-Man XL will never damage what you are cleaning, reducing rejected cores and components. If you want to improve your cleaning processes all while saving time and resources Re-Man XL is the only choice.

Before

After

Before

After

ARMEX, the Original Baking Soda Abrasive

Learn more at www.armex

ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc. Pantone 2758 C

trader-mag.com Spring 2019 TRADER MAGAZINE

77

CUT YOUR WAY TO PROFIT

New Year Special!

$2500*

OFF EACH MACHINE

Rottler Cylinder Head Package

SG8MTS

SG7MTS

The most accurate, reliable and economical Cylinder Head Seat & Guide Machines on the market today

VR10 New Year Special!

Used by World Leading High Performance Engine Rebuilders

$2500* OFF EACH MACHINE

Purchase a SG7MTS or SG8MTS and VR10 together and receive a total of $5,000* off.

While stock lasts.

78

THE CUTTING EDGE

8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg

THE HONE THAT GROWS WITH YOU Last hone you will ever have to buy!

The Rottler H85A is the only ground level hone that can be upgraded for increased speed and productivity.

Start with the Rottler H85A model and as your customer demand increases simply call Rottler to automate your hone. No need to replace the machine with a higher production model.

COMPARE THE COMPETITION • Proven, Trusted, Simple CNC Control • Automatic Load Sensing for Consistent Finish • Upgradable to Unattended Automatic Hole-to-Hole Operation • Over 200 Machines installed Worldwide

In addition to being fully upgradeable, Rottler hones are proven to last decades in the field. Their rugged base, linear slideways and ball screw with auto lubrication work together to increase life expectancy.

Diamonds reduce abrasive costs by 96% over conventional abrasives!

Rottler Hones pay for themselves in under 5 years.

Call Rottler for details.

THE CUTTING EDGE

3 YEAR WARRANTY. Built to last & upgrade.

Guaranteed!

8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg 79

ACCURATE. COMPACT. FAST.

The fastest machine for surfacing heads, blocks and manifolds

• • • • • •

Eliminate parallels & risers with generous vertical travel (19” 483mm) for quick change over time Dependable accuracy with Linear Slideways & Ball Screws that generate consistent surface finish Remove larger amounts of material in one setup utilizing Multi Pass Auto Downfeed Software Familiar controls utilizing Rottler’s Touch Screen Technology - proven in thousands of machines Flexible setup and generous room to handle from small parts to the largest diesel cylinder heads Full Enclosure keeps work area clean and Roll Out Chip Tray allows fast and easy cleaning

THE CUTTING EDGE

8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg