TRADER 148 PRI Winter 2018

NEXT POWER GENERATION

NEWEN FIXED-TURNING®, CNC Valve Seat Machining

by Interpolation of Axes.

THAT’S GENIUS! SEE YOU AT PRI BOOTH 5443

FT ®

SERIES

www.newen.com • www.facebook.com/newenfixedturning

THE

2

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

3

FARRIS EQUIPMENT SALES, INC. “Specializing in Used/Rebuilt Engine Rebuilding Equipment”

3001 Interstate 27 • Lubbock, TX 79404 (806) 762-0887 (800) 882-1808 CYLINDER BORING MILLS & BARS: Winona #VB-320 Boring Mill Berco #AC-650M Bore/Surf Mill (in AR) Rottler #F2VB and #F4VB Air Floats NEW Kwik-Way #FL & #FN Portable Bars Kwik-Way #FN-AC/048 Air Float & #FL-AC/EBF Air Float Kwik-Way #FL, #FN, #FW, #FW-VW, & #FWS bars Kwik-Way #FL & #FN Overbore Kits Van Norman #777S & #944S Bars VALVE GUIDE & SEAT EQUIPMENT: Sunnen #VGS-20C Winona #PH-2000 & #PH-2000L Peterson #TCM-25 Kwik-Way #036 & #019 HEAD & BLOCK MILL/SURFACERS/FIXTURES: Berco #RG300/900 Surfacer w/stone Scledum #RT-7S3 Surfacer Storm #85B Mill (with & without variable speed) Peterson #72 Dry Rock Surfacer LINE BORE EQUIPMENT: Scledum #BO-2500 (in Nevada) Berco #BT-6V (in California) Tobin-Arp #CB-24000

SUNNEN HONING EQUIPMENT & RELATED: #CV-616 & #CK-10 Cylinder Hones #CH-100 Line Hone & Mandrels #LBB-1810 Power-Stroked Rod Hones & Shop #LBB-1699, #LBB-1499 & #MBB-1660 Rod Hones & Shop #CRG-750& #CRG-500 Cap Grinders Tobin-Arp #CG-8400 Cap Grinder Large #CR Mandrels from 2.9” to 4.5” Large #Y104-6562 Special Aluminum mandrels Large Line Hone Mandrels from 3.0” to 5.0” #CK-4000 & #CK-2000 honing heads #HS-30 valve guide hone CYLINDER HONES & ACCESSORIES: Sunnen #CV-616 & CK-10 Hones Kwik-Way #088 manual hone w/friction feed Sunnen #CK-4000 Hone Head CRANKSHAFT GRINDERS & RELATED: Berco #RTM-351A Grinder -Rebuilt (in Ohio) Scledum #RG-350 & #RG-270 Grinders RMC #1500 Grinder (60” cap)(In AR) RMC #1200 Grinder (50” cap) Van Norman #477TA (74” cap) Storm #150B Crankshaft Welder

MISCELLANEOUS: Berco #RAC-1500 Camgrinder; Ammco #6000 Brake Lathe; Winona Flywheel Grinder; Pollution Controls #DC-III Oven; AXE & Charley Cockey Head Pressure Testers; Sioux #956 Valve Refacer; Nice Peterson #BK-17 oven; and other equipment too numerous to mention. OUR INVENTORY CHANGES WEEKLY! Check our website for most current listing.

EQUIPMENT NEEDED: SERDI #100 & #60 SEAT/GUIDE MACHINES: Sunnen #CV-616 & #CH-100 Hones, Rottler & Sunnen Seat/Guide Machines; Berco, Winona, or Scledum head/block surfacers; Berco #AB651 rod bore; AXE head pressure testers; DCM, Van Norman, & Winona Flywheel Grinders; Storm Kotifin Crankshaft Polisher; Sunnen #VR7000 or 8000 Valve Refacers: Automotive size CBN Surfacers; Kwik-Way #855, #856, & #860 surfacers; Sunnen #CHW-40 Work Stations; Sunnen #PLB-100 Line Bore; and any other equipment we can make money on. WE ARE LOOKING FOR LATE MODEL NICER EQUIPMENT. If I can’t buy it, I will try to broker it for you!

Come visit us at Booth #5615 at PRI Show in Indianapolis, Dec. 6-8, 2018!!!

www.farrisequipment.com E-mail: Sam@farrisequipment.com

SAM FARRIS

Sam is ready to make some deals!

4

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

5

A & A Manufacturing 22

PRI 7

ABS Products “IT’S IN THERE”

Quality Cutter Grinding 15

Access Industries 5

Rad Industries 58

AERA 26,78

Revco Precision 22

ABRO 66-67

RMC 29

Air & Power Tools 22

Rock n Roll Coffee Co. 35

American Gasket 41

Rottler 82-84

ArmaKleen 79

RT Sales 8

Armex 81

SBI 28

Baker Equipment Sales 15,24,25,58

Scholler Shop Equipment 32-33

Business Card Marketplace 22

T & S Machine 17-21

Classifieds 52

Turner Technology 14

Coder 57

Ultrasonic 36-37

CWT Industries 2-3

Winona Van Norman 68-71

Dakota Parts 24

Ad Rates/Specifications 53

Delta Custom Tools 10

Wisdom from Gary 64

Farris Equipment 4

“On the Road Again” 76-77

Ferrea Valves 24 Irontite 47 Jack Scholler Shop Equipment 32-33 Jackson Oven Supply 22 Jamison Equipment 13 KB Cores 58 K & S Regrinding 24 Kwikway 47 Media Blast & Abrasive 44,46 MPR Racing Engines 22 Natrium 22 Newen 1,9 Ohio Crankshaft 55 Pioneer Steel 50-51

6

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

DISCOVER NEW

T E C H N O L O G Y. IDEA S. BUSINESS. DECEMBER 6–8, 2018 INDIANAPOLIS, INDIANA USA The PRI Trade Show provides direct access to the latest in motorsports products, technology and business opportunities from around the world. If you’re in the business of racing you can’t afford to miss this event.

LEARN MORE AT PRI2018.COM

• ALL FORMS OF AUTO RACING • OVER 1100 EXHIBITING COMPANIES • THIS IS A TRADE-ONLY EVENT

T H E B U S I N E S S O F R A C I N G S TA R T S H E R E !

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

7

8

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

UNLEASH YOUR POWER WITH NEWEN FIXED-TURNING®

Always stay one step ahead of the competition. Our latest VISION™ Series allows you to reach a new level of performance.

COUNTLESS OPPORTUNITIES

FIXED-TURNING FIXED TURNING Unmistakably the best!

SERIES

ONE Machine, ONE Single Tool,

www.newen.com • www.facebook.com/newenfixedturning

...a technology concentrate!

®

TM

ERT SPRING 2018 P7.indd 1

9 trader-mag.com PRI/Winter 2018 TRADER MAGAZINE 5/29/18 1:21 PM

10

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

591 West Apollo Street • Brea, CA 92821 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

11

The Charger Production Pressure Blast Machine uses a large 1.0 cubic foot capacity ASME Coded pressure pot to pneumatically push the abrasive to the part using the nozzle ID size and blasting pressure to determine the compressed air usage.

Pressure Blasters require less cfm to create the same abrasive velocity during operation.

Direct pressure machines produce faster abrasive particle velocity, higher abrasive grain density and greater abrasive frictional heat for heavy coating removal and cross-drill de-burring.

• Three (3) large cabinet sizes all with 36 inch inside height • All three (3) cabinet sizes offer the Space Saving Side Mounted Dust Collector • Operator Platform Included • Direct Pressure can do something siphon can’t….. creates the fastest abrasives velocity….creates the highest frictional heat….blast into blind holes and pneumatically pushes abrasive through cross drill holes.

• Blast using light plastic abrasives or heavy steel shot, steel grits and all the other standard abrasives like glass beads, aluminum oxide, silicon carbide • LED Lighting • Boron Carbide Nozzle, • Large 24” ClearView Operator Window • Air Velocity Window Sweep for better visibility • Clean, Strip, Peen using all abrasive types • Also includes many more Standard Features not listed

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 12

Shown with optional Turntable

JAMISON: your best source for

Automotive Shop Equipment Rottler DA-5B Heavy Duty Boring Bar

Sunnen CH-100 LineHone with 3 mandrels

$13,500

$9,500

Sunnen Oven *Never Used*

Comec RP 900 MVA CBN Head & Block Resurfacer

$13,995

Serdi 60 Guide & Seat Machine

$6,995 Winona Van Norman XL2000A Balancer

Delta Custom Tools

$23,500

$9,950

We are Authorized Dealers for the following lines of parts & equipment:

Look to AXE

PO Box 276 • 1908-11th Street, Emmetsburg, IA 50536 • Fax: 712-852-3570

800-841-5405

www.jamisonequipment.com trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

13

14

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

Comec ACF200 Cylinder Boring/Milling Machine Call us at:

(888) 440-9429 or (800) 522-9429 bakerequip@joebakerequipsales.com www.joebakerequipsales.com SEE US AT BOOTH # 5621

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

15

Automotive Production Dominator Siphon This 100% welded 12 and 14-gauge steel Production Siphon Blaster includes the patented bolt-on internal abrasive separator reclaimer and a long list of included standard features for use with any abrasive 0-150 mesh and gun sizes 25 to 90 cfm.

Three standard cabinet models 3636, 4836 and 4848 all with 36” cabinet heights and side mounted dust collectors for space saving footprint.

• 13”X 24” Large view window • LED Lighting • 10” work ports • Fast Cleaning Siphon Delivery for easy operation and low maintenance • Gun Sizes to 90 cfm for highest frictional heat and fastest cleaning • Quickly remove rust….paint…. carbon….heat discoloration and more using high frictional heat to decrease cleaning time • Space Saving Side Mounted Dust Collector with 700 cfm blower • 220 sq’ MERV Tested Cartridge Filter • Many Part Handling Options Available • Optional HEPA After Filtration for Cell Machine Operations available • Pneumatic Dust Collector Cleaning • More Included Standard Features than any other manufacture of abrasive blasting cabinets in today’s market

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 16

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

T&S SELLS EFFICIENCY

PRI Booth 5141

“How can I thrive in this business?”

The answer to this common is, “Take your best employee and make him more efficient.” Many times the most productive operator in your shop is yourself. If you can figure out how to duplicate yourself, your effort, your attention to detail, you will have mastered efficiency. But how do you actually accomplish that?

The only way to make more money in the same amount of time is to get the work done faster. Even better is to automate so that while one machine is running other work is being performed.

That’s efficiency!

I can give a really good, artistic machinist the best Nicholson file (and we all know Nicholson is a great file!) and he MIGHT be able to surface a head flat and true with it and get the necessary surface finish…but he CANNOT make money doing

PB500 Deluxe • Most sophisticated and sensitive system available

it! Does that sound ridiculous? It should! Yet that is precisely how most shop owners have handicapped themselves. Many machinists feel that they can take the older, inefficient machines, and because they are really good at what they do, they can make them work sufficiently. And in many cases they can put out great work with them…but they can’t make great money with them.

T&S sells efficiency. We have chosen to build machines that improve your work flow. We have focused on a few pieces of equipment, that if taken advantage of, should never cost you money (assuming your shop is busy). You get the work in the door and we will help you get it out! Our Top 3 producers will be showcased at the PRI Show in Indy Dec 6-8, come see us! Booth #5141

BlockMaster

BlockMate XL

• Probe, Bore & Deck in 20 minutes!

• Small footprint, Large capacity

• Finish correcting where you start

• Probe every block, no saved programs

• Switch from heads to blocks in 45 seconds

• Deluxe model built specifically for crankshafts

• G-Code capable for production parts

• Rapid Setup with Sliding Indicator Bracket

940-668-1002 • 12 Whitleys Ridge Lane • Gainesville, TX 76240 • facebook.com/TnSMachinesAndTools 17

BLOCKMASTER CNC BLOCK MACHINING SYSTEM Probe, bore and deck a block in 20 minutes. While you are there clearance the block for stroker cranks.

Since you just decked it, go ahead and O-Ring the deck since we have the operation saved.

We are just as comfortable boring a V-8 and following it with a six-cylinder inline and then a V-6 60 degree with no saved programs or special setups. We have built and automated job shop block machining!

Anyone with engine building knowledge can run the BlockMaster after a couple of days with the included factory training in your shop.

This is a couple of hours work on the BlockMaster

18

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

PRI Booth 5141

You can also make these with the BlockMaster!

Precision Line Boring with Exclusive Servo Driven Right Angle Drive Fully Integrated Digital Runout Indicator makes block alignment extremely fast.

Let the machine do the work! Bore through the mains with our helical boring tool or precision adjustable cutter head.

Operator can easily program lifter bore centerlines from blueprint or probing. Wide range of tooling available to make the job fast and easy. After cutting let the machine index and press in keyed bushings!

This machine is just as comfortable running production parts on our full featured CNC side of the system.

Using a program like Fusion 360, or our built-in conversational programming Software, you can machine your own custom creations with our G-code capable software!

CNC Retrofits Available: Have an older CNC block machine? New T&S electronics can provide you with a virtually new machine!

Call today for a quote!

PRI Booth 5141

940-668-1002 12 Whitleys Ridge Lane Gainesville, TX 76240 facebook.com/TnSMachinesAndTools trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

19

PRI Booth 5141

PROBAL 500 DELUXE CRANKSHAFT BALANCER You might ask, “Maybe there is a ‘better’ system out there?”, we don’t believe so! T&S has invested heavily in building the quickest, most sensitive and accurate balancing software available. We can perform measurements in less than three seconds. We calculate drill depths, and when we tell you to drill in a particular location there is no chasing the angle back and forth. We have built-in reports showing the customer what the actual necessary tolerance for each crankshaft is and the actual balance achieved. A more sophisticated balancing software does not exist, and we can prove it.

T&S uses the same system for balancing turbocharger rotors as for 15,000 lb electric motor armatures and GM locomotive crankshafts that are twenty feet long. Even those extremely large parts have only a six second sample time!

T&S does not just offer an attachment to drill for heavy metal, we build the heavy metal stand into the base of the machine. We knew we were going to balance crankshafts when we built it so we held a crankshaft up in the air and built the ultimate machine around it. We include all necessary accessories with the machine. And we do this all for less than any of our competitors. As an added bonus our PB500 has the smallest footprint of any machine in the industry, AND the machine is manufactured right here in the Republic of Texas!

All accessories available 20 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

Have an older machine? Call us for a quote on an upgrade!!

BLOCKMATE XL HIGH SPEED MILLING SYSTEM The new and improved BlockMate XL for heads and blocks can kick out a head in under eight minutes and it doesn’t matter what model head it is. And we do that with our standard Rapid Set Up Fixture, no extra bolts or jigs. T&S has the exclusive Sliding Indicator Fixture to qualify the workpiece straight in the machine and at the same time show how much it will take to clean it up.

This is a half hour’s worth of heads to surface

Plus 20 minutes for this

This machine, if you keep it busy, will pay for all the other machines you want to invest in!

The BlockMate XL has a travel of 60” and 26” clearance between the table and the cutter plate. This is a lot of machine and will surface anything from a C15 Cat head or block down to the smallest motorcycle head, as well as intake manifolds and most any odd piece that needs to be resurfaced. And it does all this within a 6 ft by 4 ft footprint!

The BlockMate XL is a compact, full-featured money-maker!

Setups are easy and fast!

PRI Booth 5141

940-668-1002 • 12 Whitleys Ridge Lane • Gainesville, TX 76240 • facebook.com/TnSMachinesAndTools trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

21

22

ABS 20 Ton Power Hydraulic Floor Shop Press Ideal for heavy metal installation, removing & installing bearings, bushings, balancers and more!

• Load capacity: 20 ton • Overall height: 61.5" • Table height is adjustable in 5" increments • Working Height 1” to 44.5” • Slide in Press Plate Included • Convenient foot operated air/hydraulic motor • Sliding head allows for offset pressing • Heavy-duty H-frame constructed of highgrade steel

Accessories Included

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 23

SEE US AT BOOTH # 5621 24 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

ABS CRANK POLISHERS - 3 SIZES This one is going to Midstream Operations in Colorado. How about yours?

FEATURES:

• Polishes crankshafts up to 55˝ • 2-1/8˝ belt • Aircraft aluminum drive wheel & idlers • Steady rest for doing heavier diesel cranks • 5˝ Chucks • Available to handle up to 32˝, 42˝ & 55˝ center to center See our video at: youtube.com/absproducts

591 W. Apollo Street • Brea, CA 92821 ph (714) 671-0728 fax (714) 671-0836 email: absproducts@sbcglobal.net www.abs-products.com

Now Pressure Testing Is Not Just A Service For Your Customer It Also Makes Good Profit For Your Shop!

SEE US AT BOOTH # 5621 Precision surfacing that you can rely on to last many generations. Berco has 90 Never miss aof leak in an aluminum head, block plus years manufacturing quality or up to a 53” long diesel head. machines that last a lifetime!

Quick setup and immersion in heated water Join the thousands of shops that have opens up all leaks for a positive test.

experienced the quality of Berco, but nowrotation at an affordable price.

360º of heavy parts lets you see the exact position of leaks.

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

25

EnginE ProfEssionals, join us for cocktails and aPPEtizErs at thE Pri show!

Friday, December 7, 2018 5-8 p.m.

Pri trade show, indiana convention center, room 231-234 open bar and appetizers. rsVP online:

www.aera.org/party PlEasE notE: You must rsVP by December 1, 2018. (there is no cost to attend.) rsVP online or contact karen tendering @ aEra: call toll-free 888-326-2372 (or 815-526-7600, ext. 202) or e-mail karen@aera.org. Please pickup your credentials at the Pri show, aEra Booth #5514.

875 fE inB Er g cour t, suitE 106, carY , il 60013 • 888-326-2372 or 815-526-7600

26 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

THE FINISH LINE ABS carries over 100 different styles and sizes of belts to meet all of your finishing needs!

Soft Back•Diamond•Micro Finish•Hard Back•Cork•Scotch Bright

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

27

28 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

5775 Bridgeview Center Saginaw, MI 48604 ENGINE REBUILDING EQUIPMENT

USED EQUIPMENT AVAILABLE

RMC R2000 Line Boring Machine

RMC V30 CNC

RMC 1500 Crank Grinder Also Available...

• RMC 1000 Boring Mill • Kansas Instrument HC1 Hone • Sunnen MBB-1660 Rod Hone

Winona Balancer

• Several Jet Washers • Several Amco Brake Lathes • Sioux 2001 Valve Grinder ...and more

Call our Sales Team for Pricing 800-248-5062 or visit our website www.rmcengine.com trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

29

PowerPeen Direct Pressure Blast Cabinet Optional Mobile Work Cart shown with Polyethylene Turntable, Outside Tracks and Door Modification Optional Rubber Cabinet Liners, Operator Platform with Double Steps.

The ABS Products PowerPeen Direct Pressure Blast Cabinet comes in many different cabinets sizes including 60x60x48H model, choose the one right for your application. If you need a Direct Pressure for Plastic, Glass Beads, Aluminum Oxide, Steel Shot/Grit or any abrasive type between 20 to 120 mesh the Power Peen is the right machine for the job saving dollars on the purchase. It includes a long list of standard features and access to a longer list, almost eighty, of optional features to make blasting the part and machine maintenance easy and simple. Patented Separator Reclaimer sends the spent abrasive and dust into the 220 sq.ft. cartridge dust collector complete with hopper dust storage and pneumatic vibrator cleaning cycle. Advanced LED lighting, window sweep, ASME Coded 1.0 cubic foot pressure pot, MERV tested filter cartridge, operator platform and heavy duty bar work grates and more are all included. Add an optional Mobile Work Cart making quick work of loading hard to handle large parts. Call for added information on the machine and options. 714-671-0728

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 30 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

Power Peen Direct Pressure Included Standard Features • 13” x 24” window with protector • Window sweep • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • LED advanced lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning vibrator • HD bar work grates • MERV tested cartridge, 220 sq.ft.

• Dust storage hopper, 1-1/2 c.f.

• 1.0 c.f. pot capacity • Operator platform included • Boron Carbide Nozzle

Handheld Polisher A Must Have!

This is a must have polisher for machine shops, motor rebuilders, hydraulic rebuilders, motor and engine repair shops. Makes polishing your crank, cam and rack & pinion shafts simple, easy and cost effective. Comes with premium Baldor motor for long life, Reinforced aluminum frame for ease of operation, Long Lasting Ball Bearing rollers which accommodate ¾” to 2” wide belts. Available in 64” or 72” models.

Contact our sales team today!

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

31

JACK SCHOLLER EQUIPMENT

USED EQUIPMENT

CRANKSHAFT GRINDERS Berco RTM 300 Crankshaft Grinder - 94”, Arnold Gauge, Dresser, 2 Steady Rest.................................................... $25,000.00 4 Wheels & Hubs (Used as Roller Grinder) Reconditioned Storm Vulcan 15C Crankshaft Grinder with Chucks, Standard Equipment,............................................................... $12,500.00 including 4-Wheels & Hubs Berco Hubs for 225 & 270.................................................................................................................................................. $275.00

GUIDE & SEAT MACHINES Winona PH2000 Guide & Seat Machine......................................................................................................................... $2,500.00 Peterson TCM25 Guide & Seat Machine with 180 Degree Fixture.............................................................................. $4,500.00 Peterson TCM25 Guide & Seat Machine with 360 Degree Fixture............................................................................... $5,500.00 Peterson TCM25 Guide & Seat Machine - Variable Speed with Air Lock Fixture........................................................ $6,500.00 DCM HMC2000 Guide & Seat Machine.......................................................................................................................... $6,500.00

PRESSURE TESTERS Master Tool PT48 Pressure Tester with Power Rollover................................................................................................ $4,500.00 Delta Pressure Tester, 15” Width, Standard Tooling...................................................................................................... $4,500.00 Master Tool Pressure Tester - 38”.................................................................................................................................. $3,500.00 Peterson PT38 Pressure Tester...................................................................................................................................... $3,500.00 Master Tool Head Oven................................................................................................................................................... $1,000.00

VALVE GRINDERS Kwik-Way SVS Valve Grinder.......................................................................................................................................... $2,500.00 Sioux 2075 Valve Grinder................................................................................................................................................ $2,500.00

SURFACE MACHINES Van Norman 570 Broach, 2 Speed with Flywheel Grinder Attachment........................................................................ $2,000.00 RMC 11 Surfacer with CBN.......................................................................................................................................... $11,000.00 Kwik-Way Master Head & Belt Sander - 14”.................................................................................................................. $3,000.00

ROD HONES, ROD BORING, CAP GRINDERS, ROD HEATERS Sunnen 1699 Rod Hone.................................................................................................................................................. $2,500.00 Peterson CG87 Cap Grinder.......................................................................................................................................... $1,800.00 Sunnen CRG750 Cap Grinder......................................................................................................................................... $1,250.00 Sunnen 1299 Rod Hone..................................................................................................................................................... $950.00 RMC-70 Cap Grinder with Heavy Duty Factory Table................................................................................................... $2,500.00

CYLINDER HONE - LINE HONE Sunnen CK10 Cylinder Hone.......................................................................................................................................... $9,500.00 Sunnen Line Hone Mandral - 15RY4500........................................................................................................................ $2,000.00 Sunnen Rod Hone Cabinet................................................................................................................................................ $500.00 Sunnen CRH-50 Connecting Rod Heater.......................................................................................................................... $750.00 Sunnen CRG-770 Cap Grinder....................................................................................................................................... $1,350.00 Winona SE2300 Power Stroke Hone.............................................................................................................................. $4,500.00 Hone Master Cylinder Hone - Manual............................................................................................................................ $1,200.00

FLYWHEEL GRINDERS Peterson FG24 Flywheel Grinder.................................................................................................................................... $4,500.00 Winona FG5000 Flywheel Grinder.................................................................................................................................. $4,000.00 DCM Flywheel Grinder.................................................................................................................................................... $3,500.00

Office: 704-924-6803 Jack: 704-906-7980 Sterling: 717-377-1587 Scott: 404-488-4378 32

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

157 Wedgeway Drive • Statesville, NC 28677 FLOW BENCHES Super Flow SF-300 Flow Bench..................................................................................................................................... $3,000.00

BORING BARS Berco BT6 Line Boring Machine - Does Heads & Blocks............................................................................................. $9,500.00 Berco ACP151A/M Cylinder Boring Machine, 45 & 30 Degree Fixtures....................................................................... $8,500.00 Tool Sharpener, Standard Tooling Waida 02 Boring Bar - No Tooling.................................................................................................................................. $1,500.00 Kwik-Way FL Boring Bar with Standard Tooling & Tool Box......................................................................................... $4,500.00 Rottler FA1 Boring Bar.................................................................................................................................................... $4,500.00 Kwik-Way FN Boring Bar with Standard Tooling & Tool Box......................................................................................... $3,500.00 Kwik-Way FN Boring Bar with Air Float Table, Standard Tooling & Tool Box............................................................... $5,500.00

CLEANING EQUIPMENT Trinco Glass Bead Machine & Filter............................................................................................................................... $1,250.00 RMC Rinse Booth with Turntable................................................................................................................................... $1,250.00 Empire Glass Bead Cabinet - 48 “ x 48”........................................................................................................................ $1,800.00 Peterson AB502 Steel Shot Blaster................................................................................................................................ $2,500.00 Bayco Oven BB-12.......................................................................................................................................................... $1,800.00 Us Metals Oven............................................................................................................................................................... $1,500.00 Peterson BK17 Oven....................................................................................................................................................... $1,500.00 Peterson SC2233 Spray Washer, Gas............................................................................................................................ $2,750.00 Kwik-Way 209 Spray Washer - Reconditioned, Electric Heat, 26” Turntable 40” Working Height, 7-1/2 HP......................................................................................................................................... $4,000.00 RMC Glass Bead Machine.............................................................................................................................................. $1,200.00 Winona Glass Bead Machine.......................................................................................................................................... $2,500.00 RMC Head Oven.............................................................................................................................................................. $1,000.00 Peterson 54” Spray Washer - Gas.................................................................................................................................. $4,500.00 US Metals Tumbler.......................................................................................................................................................... $1,000.00 Gray Mills Parts Washer..................................................................................................................................................... $250.00

MISCELLANEOUS Ammco 4000, 4100, 3000, 7000 Drum & Disc Lathes...............................................................................................Call for Price 6 - Air Compressors...................................................................................................................................................Call for Price New Dowell Pin Puller Set.................................................................................................................................................. $175.00 New Piston Pin R & R Set.................................................................................................................................................. $175.00 New Sioux Tapered Pilots.................................................................................................................................................... $37.50 Diamond Flywheel Stones................................................................................................................................................. $175.00 New - Portable Crankshaft Polisher.................................................................................................................................. $795.00 Sioux Seat Grinding Stones - 1-1/8” through 1-1/2”............................................................................................................ $8.95 Sioux Seat Grinding Stones - 1-9/16” through 1-15/16”...................................................................................................... $9.50 Sioux Seat Grinding Stones 2” through 2-1/2”................................................................................................................... $10.50 Sioux Seat Grinding Stones 2-3/4” through 3-1/4”............................................................................................................ $17.50 Kwik-Way Seat Grinding Stones - Same Sizes and Prices as Sioux Sunnen Rod Hone Mandrals - CR, PL, KL, LJ, 4UL Series......................................................................................Call for Price Nugier 40 Ton Press........................................................................................................................................................ $2,500.00 Nugier 100 Ton Press...................................................................................................................................................... $7,500.00 Sioux Work Bench with Sioux Seat Driver & Sioux Stone Dresser............................................................................... $1,250.00

email: jackschollerequipment@roadrunner.com

www.jackschollerequipment.com trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

33

Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing.

Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments.

Works great will all degree wheels through 16” or larger depending on the mounting hole.

3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ----------- $495

18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings.

Part #ST-DegreeWheel-18 -------------------- $225.00 Pointer ------------------------------------------$60.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

34 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

PERFECTLY ROASTED with a hint of

VANILLA “Discover A carefully smooth blend of

Arabica organic beans”

www.rocknrollcoffeeco.com trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

35

GET CLEAN PARTS

The UltraSonic LLC Way!

The Block & Head Cleaners PRI Sh Speciaow start t ls Call N oday. ow!

New Dual Program Selection!

Ultra 3800FLT Lift Table with Agitation 115 gallon (435 liter) Capacity 38.5” Tank Length

Visit us at Booth 5643, 2018 PRI Show.

STANDARD FEATURES • Digital Touch Controls • Dual Filtration System with Weir Tank • Opposing Horizontal Transducer Cleaning • UltraSonic clean from TWO directions • 7 Day Heat Timer • Insulated Tank and Lid • Stainless Steel Construction • Movable Basket • Automatic Cycles

Ultra 3200FA Agitation with Oscillation 65 gallon (246 liter) Capacity 32.75” Tank Length

ultrasonicllc.com 513-502-9746

CINCINNATI, OHIO youtube.com/ultrasonicllc 36 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

info@ultrasonicllc.com

GET CLEAN PARTS

The UltraSonic LLC Way!

Small Parts Cleaners Ultra 2100M

STANDARD FEATURES

Economy Head Cleaner

• Manual Controls • Stainless Steel Construction • Movable Basket

13 gallon (50 liter) Capacity

Visit us at Booth 5643, 2018 PRI Show for the unveiling!

Ultra 1300M

NEW!

Carb/Injector Cleaner 4 gallon (15 liter) Capacity

THE SHOWCASE MACHINE!

NEW!

Ultra 1000M Lifter Cleaner 1.1 gallon (4.5 liter) Capacity

SAV

20%

E

PRI Di on ONscount OrdeLrsINE

Visit our Store to receive the PRI Discount

ultrasonicllc.com 513-502-9746

CINCINNATI, OHIO youtube.com/ultrasonicllc

info@ultrasonicllc.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

37

Pollution Control Workstations

$7,900

.00

Pollution Control Workstations PCE-4736

47˝ W x 36˝ D, 440 sq. in. filter, removable dust pan, fiberglass grate, plexiglas enclosed top that swings up out of the way for loading, swings down to keep particles out of shop, single motor on the back 3/4 HP @ 750 cfm.

Move up to 2HP, 1100 cfm blower.

Upgrade from ABS-4228, this is the latest pollution control workstation from ABS Products.

This machine is a must in today’s market where you are working with plastic, fiberglass and carbon fiber that you have to keep out of your lungs.

See More Pollution Control Workstations and many other products: www.youtube.com/absproducts 591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com 38 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

Downdraft Tables with Turntables We are delivering 3 new Downdraft Tables with Turntables to LKQ/Amada of Texas for blowing off blocks and deburring parts.

Downdraft 36’ turntable, 2 HP, 1150 CFM for blowing off parts, 440 square feet of fire retardant air filters, non-scratch plexiglass, new-style metal frame.

CALL TO ORDER YOUR CUSTOM SOLUTION TODAY!

714-671-0728

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

39

Multi-Abrasive 2-station Blasting Cabinets for Production Engine Rebuilders!

PowerPeen 6048

We built this super-flexible two-station blasting system for Gary Kehrer at Platinum Performance Group in Sunnyvale, TX. Gary works on aircraft engines such as the Lycoming prop engine cases pictured above. There is also a photo of the welded steel tubing that works as an engine mount to hold those engines in.

They are stripped down to remove paint and magnafluxed, Gary’s shop does it all.

He also works on Continental flat 6’s, race boats, aluminum magnesium heads from different manufacturers.

Shot peening, plastic media, glass bead, all runs through this versatile production quality machine.

If you run a large production shop like Gary’s we have the custom blasting machines you need.

This makes an EXCELLENT shot peening cabinet for diesel cranks or anything!!!

Tools for Performance Racing Engine Builders 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

40 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

Excellent maching for shot peening cranks!

In fact that’s what we designed it for!

The welded steel tubing that works as an engine mount Lycoming prop engine.

Lycoming prop engine cases on turntable and dolly system, entering the blaster.

Nozzles for shot peening, blasting and plastic media!

• A2 tool steel • Heat treated to 80 Rockwell • 6” x 1/2” OD 90 degree nozzle • 5” x 1/2” OD straight nozzle • 3” x 1/2” OD straight nozzle • 4-1/2” x 3/8” OD 90 degree nozzle • 3” x 3/8” OD straight nozzle

Each nozzle: $250.00 Full set: $1250.00 trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

41

THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized & your stock safely stored!

CH-1 Crank Rack

CH-1 Crank Rack with optional top, V-blocks and one cam hanger.

CH-2 Double Crank Rack

CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level.

Each level holds between 20-24 cranks depending upon the model.

ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)................................... $149.00

Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory.

This is a rack for every crank.

SAVE MONEY AND FLOOR SPACE!

2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack

591 West Apollo Street • Brea, CA 92821 phone 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

42 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

System on Best Storage the market!

Can Be Arbors perately!

Se Bought

Mill Mounted Drilling Platform

ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks.

Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)

ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments

$149.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

ABS-Products.com Call 714-671-0728

Drilling Platforms for Hines & Winona Balancers

Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert.

Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.)

CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack.

CR-ES-3 ............................................................................. $95.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.

Tools, Equipment, Machines for Engine Builders & Rebuilders trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

43

3030 PowerPeen Industrial Direct Pressure Each abrasive delivery method (siphon and direct pressure) has its own “best applications” just like engines open to atmosphere and engines using boost to overcome one atmosphere. Each model also has its best application for the cabinet size; one size does not fit all! The PowerPeen 3030 is the smallest cabinet size in a seven cabinet lineup. The 3030 is a compact size with all the features included making it an Industrial Direct Pressure Cabinet in a smaller package.

Use for shot peening quick replacement parts or use for glass bead, plastic and all the other media types.

Standard Features • 13” x 24” window with protector • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • Advanced LED lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning • Bar work grates • MERV tested cartridge, 220 sq.ft.

• Dust storage hopper, 1-1/2 c.f.

• 1.0 c.f. pot capacity, Charger model • Operator platform Included • Boron Carbide Nozzles

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 44 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

5.0 CRANK&CAM POLISHER

Over 50 years of polisher manufacturing experience and we never stop improving our products. Our new 5.0 versions make cleaning and micro polishing crankshafts, camshafts and rack & pinion shafts fast and easy. With variable speed control, spring loaded polishing belt arm for quick and easy belt changes, heavy duty, long lasting frame and components.

///////////////////////////////////////////// Please contact us for a spec sheet and pricing.

Many types of shafts and cylinders can also be polished on our machines. Standard sizes are 32”, 42” and 48” centers. Custom sizes also available upon request. /////////////////////////////////////////////// Crankshaft Polisher (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Camshaft Polisher 45

The Hurricane Wet Blast Machine, For A Finer Finish Media Blast manufactures more than 170 standard models and sizes of blasting cabinets with over 80 optional features for increased productivity, durability, and operator safety. Our extensive line of Wet, Dry, Siphon and Direct Pressure blast cabinet models includes specialty machines for automotive, aerospace, military, precision focused micro blasting, plastic stripping, soda blasting, tumble part processing and shot peening. Cartridge dust collectors, HEPA after filters and separate standing timed reverse pulse cleaning dust collectors are included as standard sandblasting equipment or available option upgrades. The Hurricane Wet Blaster has many applications in the automotive field to include 3-D printing, processing wheels, chemically clean part surface, zero abrasive embedment and the elimination of frictional heat capable of damage and part distortion.

Standard Features • Stainless Steel Cabinet • Seal-less Slurry Pump • 25 to 28 % Abrasive Suspension for faster processing • Negative Pressure Cabinet with Mist Collector Blower and Filter • LED Cabinet Lighting • Positive Locking Window Seal

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com

46 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

47

ALL NEW, Pro G/S The Pro G/S is a more compact cabinet using smaller amounts of compressed air designed for shops with limited floor space and smaller part volumes. The Pro G/S was designed specifically for use with Grit and Shot or combinations of the two. Applications Finishes and Camouflage Repairs. The included casters allow the machine to be rolled into position,used, and then moved to a stored location.

Attached Dust Collector

FEATURES & BENEFITS • Duplicates Original Factory Finishes • Camouflage Surface Repairs • Reaches Down Into Deep Cylinder Ports • Compact Footprint with Casters • Negative Pressure 100% Welded Dust Collector • 90 sq. ft cartridge filtration • Semi-Automatic Dust Collector Vibrator Cleaning Cycle • Advanced LED Lighting • ASME Coded Pressure Pot with Access Port • LG. 13X24” view window

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 48 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

BY ABS

Built for PERFECTION E n g i n e B u i ld i n g To o l s

Piston Deck Height Bridge

Piston Ring Squaring Tool

Check the piston height easily, adjustable mounts move to fit any size bore, adjustable gauge mount to zero the gauge where you want. A must have tool when calculating piston deck clearance. Includes gauge and can also be used to measure flywheel step height.

Fast, easy and repeatable fixture for squaring rings in the bore prior to setting end gaps.

Two sizes, RG-RST covers bores from 2.000” to 5.000” and RG-RST-D covers bores 5.000” to 8.000”. Places rings 1.000” below the deck to get pasthead bolt distortion.

• No wrenches required • Change bore sizes in seconds!

Precision V-Blocks 714.671.0728 abs-products.com sales@abs-products.com youtube.com/absproducts

For precision keyway milling and cross drilling cranks. Consists of V-Blocks, hold down bars, nuts, T-nuts and locators.

Fits most milling machines.

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE 49

GARAGE AND SHOP ORGANIZERS The Pioneer Steel line of high quality garage and shop organizers meet the high standards you demand for your shop or garage. These new products are a great way to store and organize those loose items and will give your garage, shop or enclosed trailer a cleaner look. Pioneer Steel now has exactly what you need at an affordable price. Over 30 sizes and styles to choose from; made of high quality steel and available in white, red or black durable powder-coat finish. MOUNTING HARDWARE INCLUDED!

2 ROW AEROSOL CAN HOLDER Capacty: 8 cans

2000W 2000R 2000B

SMALL OIL BOTTLE SHELF Capacty: (6) 1 QUART BOTTLES

2010W 2010R 2010B

SMALL AEROSOL CAN RACK Capacty: 6 cans

2002W 2002R 2002B

LARGE OIL BOTTLE SHELF Capacty: (12) 1 QUART BOTTLES

2014W 2014R 2014B

LARGE AEROSOL CAN RACK Capacty: 12 cans

2006W 2006R 2006B

COMBINATION STORAGE SHELVES

2016W 2016R 2016B

PHONE: (714)255-0526 • FAX: (714) 257-0184 50

LARGE OIL BOTTLE HOLDER Capacty: (8) 1 QUART BOTTLES

2008W 2008R 2008B

LOCKABLE ORGANIZER WITH STORAGE SHELF

2022W 2022R 2022B

TOOL BOX

R103

TOOL BOX

HR19

TOOL BOX

R1182-02 R1182-03

PIONEER STEEL CO.

sales@pioneersteelusa.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

51

SHOPS FOR SALE Complete Machine Shop with Service Bays

Shop Equipment For Sale:

On a Main Street in Springfield Oregon. In business for 35 years Please contact Jeff for more info:

One 15 & one 15A Storm Vulcan crank grinders with lots of extra

Jeffccaldwell@aol.com phone: 541-914-6490

Washer $800 Gulfport, MS Call 228-323-0607

High Performance Machine Shop & Auto Parts

Shop Equipment for Sale in CA

Strategically located in north-central Virginia with no competition within 40 miles in all directions. This full service business provides the new owner exceptional growth potential.

Currently building and selling top quality high performance engines, trans and rear-ends for retail and wholesale markets for over 40 years.

Axe Pressure Tester & 2 Wahers, Berco Crank Grinder, Balance Technology Balancer, Magnaflux IV 60 Wet Mag, Sunnen CK10, CH100, LRG 750, LBB1810, VR6500, Head Station, NEWEN G II Valve Seat Machine, Rottler F2B, RMC10 CBN/PCD, Winona Flywheel Grinder, Viking Oven, Zero Pulse Air Blaster, specialty tools, inventory.

Interested buyers inquire by phone: 540-840-0069

$95,000 OBO

or e-mail: bcauto69@bcauto69.net

805-965-8541, Tobysengineparts@cox.net

Bob’s Machine Shop The best automotive machine shop for sale in Southern California.

Cylinder head rebuilding and engine rebuilding as well as auto parts. 50 years in business, owner wants to retire age 76. Caters to automotive dealer programs.

If interested, text: 818-391-3453 I’ll call you back.

tooling and grinding wheels. $4,000 each. Storm Vulcan 150 Jet

Custom 10’ Crank Polisher Extra-large, production crank polisher for those big diesel cranks.

Designed and built to handle the extra weight & length of large heavy cranks, 10’ 7” between centers. Uses 5-7/8” x 77” belts.

Contact us for additional details & price.

“New” 8˝ Self-Centering Lathe Chuck Shop Equipment For Sale: Ferndale, MI 586-549-7557 Complete Sunnen LBA1299 rod hone setup includes 4 mandrels and AG300 gage and CRG-500 capgrinder $3K. 901 Superflow dyno $10K, QT-300 SimTest machine $3K, KwikWayFN cylinder boring-bar $3K, Stewart Warner 2000 Balancer $2K, DCM Tech Flywheel Grinder $2K, KwikWay HeadShop seat/guide machine $4K, BTM 225 Berco Crankshaft grinder $7K, 054KW boring stand $1K.

• 8-Inch 3-Jaw Scroll • 2.55-Inch Bore • Plain back • 1 set of jaws • Wrench & mounting screws included $199.00 ABS Products: 714-671-0728

Currently looking for skilled crankshaft grinding employees Performance Crankshaft 586-549-7557

Advertise now in the Trader Classifieds, Call: 714/ 671-0217 www.trader-mag.com 52

TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

53

The Ultimate Piston Fixtures Jaws can be sold separately for any ring width: 3/16˝ down to .5 mm!

10” Tilting Rotary Table with 8” Chuck & special Piston Jaws

Standard ABS Piston Fixture

See the video: YouTube.com/absproducts Special Diesel Jaws for 6”& 8” Chuck

Special Chuck for Machining Sleeves

Jaws available for 6” & 8” chucks.

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

IMPORT TUNERS & MOTORCYCLE BUILDERS: We have many new jaws for small bore motors!!!

7-1/2” Blank Piston Fixture Jaw: We machine this to fit YOUR ring groove! Or you can purchase blanks and machine yourself.

Available for 6” and 8” chucks as well. www.performancetradermagazine.com

54 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

55

N-200 Stage II Soda Blaster Using GhostFlow™ Technology

STANDARD MACHINE FEATURES • Three (3) Cabinet Sizes • 36x36, 48x36 & 48x48 (w x d) • 13” x 24” ClearView™ Window • Easy Clean MERV Tested Cartridge Filter • Pneumatic Vibrator Dust Collector Cleaning Cycle • Reverse Pulse Dust Collector Cleaning Cycle • 700 CFM Blower w/ Silencer • Easy to use Soda Pressure Generator with Control Panel • ASME Code 0.8 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 9 to 22 CFM Soda Nozzle • Large Side Access Door • Pneumatic Soda Feed System

The N-200 Stage II Soda Blasting Cabinet is one of the most popular of the NEW Soda Models using larger cabinets and larger dust collector sizes.

This allows the user to operate longer hours and access other part handling options important to soda blasting applications.

This is a great choice for cleaning many automotive parts like automotive heads when you want the original finish and a soluble abrasive to eliminate any abrasive residuals.

The Patented Separator Reclaimer prevents 95% of the used soda from transferring into the dust collector. This unique design allows longer daily machine operation and more daily part production.

Downdraft Cabinet Airflow using GhostFlow™ Soda Delivery Technology and Used Soda Dropout are what make ABS Products the leaders in soda cabinet technology.

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

56

Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head!

1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 5. Easy 6. Profitable

714-671-0728 abs-products.com

VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00

VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 VT-2500-4500-F 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting ............$21.80 VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting ......................$21.80 VT-3000-4000 3”x 3” pad without fitting ......................$21.80 VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 VT-3000-4000 3”x 4” pad without fitting ......................$22.80 VT-6000-6000 6”x 6” pad without fitting ......................$24.95 VT-3-TP 11”x 35” table pad for VT-3 ...................$62.95 VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 VT-SP-14 14 mm spark plug adapter ....................$39.00 VT-SP-18 18 mm spark plug adapter ....................$49.00 VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 GA-LG Liquid filled gauge .................................$80.00 VT-3-H 1/4” vacuum hose ..................................$39.00 VT-RV Release valve ..........................................$42.00 VT-TA Table adapter .........................................$10.00 VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 VT-3-P 3 CFM pump .........................................................$328.98 VT-5-P 5 CFM pump ........................................$475.00 trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

57

SEE US AT BOOTH # 5621

CORES

Full Line Core Supplier

KB Cores is a worldwide distributor of cores and parts We have a huge inventory of ...

• Engine core • Camshafts • Transmission core • Crankshafts • Connecting rods • Hard parts • Cylinder heads • Engine Components • and more !

(800) 822-2673

www.kbcores.com Transmission Parts Sales Engine Parts Sales

Chris Snow x225

Lisa Romano x239

We Ship Anywhere

58 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

COBRA STAGE I SODA BLAST CABINET

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

59

Get Abrasive!

ABS Blasting Media Abrasives for all Applications.

Cleaning parts, removing paint, powder coating, surface blending or surface preparation, ABS has the right type of blasting media for all your needs. We keep a wide variety of types and sizes in stock.

Give us a call to discuss which abrasive will work best with your application and machine.

BAKING SODA PLASTIC MEDIA

STEEL GRIT

ALUMINUM OXIDE

STEEL SHOT

(714)671-0728 ABS-Products.com sales@abs-products.com info@ abs-products.com youtube.com/absproducts 60

GLASS BEADS

36˝ x 36˝ Special Shot Peening System w/ track

ABS Products Dual Shot Peener - N440 • • • • • • • •

36” x 36” shot peener with track and turntable designed to be moved by forklift, run on 110V, be portable 10” arm holes large window rubber lined interior lighting top of the line!

Small step available!

We make these up to 60” x 60” and larger! Call us for your custom shop needs!

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

61

Update your Piston Ring Grinder to an ABS Ring Grinder!

START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs.

We have what you need for any type of ring!

Complete with Micron Disk Micron Disk, 1 - 4” Turntable ---$1,455.00 Micron Disk, 1 - 5” Turntable ---$1,555.00 Micron Disk, 1 - 6” Turntable ---$1,655.00 Diamond or Borzon Disk ----------$325.00

New Scotch Brite Buffing Wheel RG-5953 -----$10.50 ea.

New Felt Buffing/Deburring Wheel RG-5952 ---$14.75 ea.

New Stick-On Disks RG-5956 --------------10 for $50.00 12 pack of Micron Disks --------------------------$19.25 50 pack of Micron Disks --------------------------$65.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts 62 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

$190.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

63

Wisdom from Gary

“There’s my way... or the wrong way”

Tips & Tricks Track & Dolly with Turntable In Gary’s YouTube video from 2011 he shows how our Track and Dolly system can be added to any machine and that is especially useful “if you are going to put a block on it... it makes it very, very easy and we do this for all the cabinets” Gary spent a lot of time inventing ways to make your job easier, faster and more reliable.

For more of his wisdom, check out our YouTube channel: @ABSProducts

Gary Thompson Founder of ABS Products

Gary’s legacy will continue by sharing with you his helpful tips in each issue.

64 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

65

66 66 TTRADER RADERM MAGAZINE AGAZINE PRI/Winter PRI/Winter 2017 2018 trader-mag.com trader-mag.com

• METALEX BANGKOK (THAILAND) NOVEMBER 21ST -24TH • POWER-GEN International DECEMBER 4-6, 2018 | ORLANDO, FL • PRI SHOW INDIANAPOLIS (USA) DECEMBER 6TH -8TH 2018 BOOTH NO 5736 • IMTEX FORMING BANGALORE (INDIA) JANUARY 24TH -30TH 2019

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

67 67

68 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

69

 �

Â?Â?

�� �

Â? ­€Â? ‚ /ƒ  Â? Â

�

Â

$48.00

Â?

�

Â

$59.00

�� � �

­

€ �

‚ �ƒ�

$30.00

�� � �

­

�

„ Â

$54.00

Â? Â

Â

MIX & MATCH

Buy 5 or more stones and take another

20% off

„ …† …

Â

Part No.

Size

CBN Sides

801120C

2.00�

FLARED

Â

… ­

801128C

3.00�

FLARED

Â

$197.00

863332C

4.00�

FLARED

Â

$199.00

801130C

6.00�

FLARED

Â

$220.00

801130CX

6.00�

FLARED

†

$220.00

801130D

6.00�

DIAMOND FLARED

$220.00

801105C

2.00�

STRAIGHT

General purpose, for cast iron & medium steel

$128.00

801106C

2.25�

STRAIGHT

General purpose, for cast iron & medium steel

$138.00

801107C

2.50�

STRAIGHT

General purpose, for cast iron & medium steel

$154.00

801108C

3.00�

STRAIGHT

General purpose, for cast iron & medium steel

$197.00

801130CG

6.00�

FLARED

Heavy graphite – Best for billet steel

$220.00

801123C

5.00�

FLARED

General purpose, for cast iron & medium steel

$210.00

801123CG

5.00�

FLARED

Heavy graphite – Best for billet steel

$210.00

Workpiece/Material

List

|

| @ Â Â? Â? Â? | Â Â? Â? Â?

70 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

STAINLESS STEEL WASHERS

It’s a dirty job, but somebody gets to do it.

Larger and smaller models also available

SSW4325 $9,995.00

SSW3317 $7,495.00

List Price $11,995 Basket 45� dia x 25� h Parts Washer

List Price $8,995 Basket 33� dia x 17� h Parts Washer

Specifically designed for washing heads, blocks and other engine components. Set the timer for up to 60 minutes and go on with other projects. The electric heating elements guarantee quick-solution heat up and maintain steady temperatures throughout use with no wait time.

The double-lipped door seal prevents leaks and requires no gasket to maintain. Save clean-out time with the side drains and full tank access at the front of the machine. The stainless steel construction is built for a long life requiring low maintenance. The large diameter nozzles flood parts with solution without getting cloggged.

@

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

71

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 72

Mention This Ad For A Special Discount

Balancing Slugs, Pins, Plates & Bars

Our heavy metal arrives finished, ready to install, oversized by .002-.003 for a precise press fit. We have the best quality, largest inventory and over 30 years experiences with heavy metal for crankshaft and chassis balancing.

Contact our sales team today!

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

• Hundreds of sizes in stock • Custom sizes available upon request • We can cut weld chamfers on any order trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

73

EASY REFERENCE BALANCING CHARTS HEAVY METAL BALANCING WEIGHT GAIN CHART DIA. X LENGTH

CONVERSION CHART OUNCES TO GRAMS

TUNGSTEN

STEEL

NET GAIN

7/16" x .875" 1/2" x .750"

38 43

17 19

21 24

1/2" x 1.000" 1/2" x 1.200" 1/2" x 1.250" 5/8" x 1.000"

57 65 72 91

25 30 31 39

32 35 41 52

5/8" x 1.200"

109

47

62

5/8" x 1.250"

114

49

65

3/4" x 1.000"

122

56

66

3/4" x 1.200" 3/4" x 1.250" 7/8" x 0.500" 7/8" x 0.700"

147 162 87 117

67 70 38 54

80 92 49 63

7/8" x 0.750"

127

58

7/8" x 1.000" 7/8" x 1.100" 7/8" x 1.200"

169 186 198

7/8" x 1.250"

OZ

GRAMS

1/16

=

1.77

1/8 3/16

= =

3.54 5.31

1/4 5/16 3/8 7/16

= = = =

7.08 8.85 10.62 12.39

1/2

=

14.16

9/16 5/8 11/16

= = =

15.63 17.70 19.47

3/4

=

21.24

13/16

=

23.04

69

7/8

=

24.78

77 85 92

92 101 106

15/16 1

= =

26.55 28.35

210

96

114

2 3

= =

56.70 85.05

1" x 0.500"

111

50

61

4

=

113.40

1" x 0.700"

153

70

83

5

=

141.75

1" x 0.750" 1" x 0.850"

164 190

75 85

89 105

6

=

170.10

7 8 9 10

= = = =

198.45 226.80 255.15 283.50

11 12

= =

311.85 340.20

= = =

368.55 396.90 425.25

=

453.60

1" x 1.000"

227

100

127

1" x 1.100"

243

110

133

1" x 1.200"

265

120

145

1" x 1.250"

275

125

150

1-1/8" x 1.000"

282

127

155

1-1/8" x 1.200"

325

153

172

1-1/8" x 1.250"

350

160

190

1-1/4" x 1.000"

346

157

189

13 14 15

1-1/4" x 1.200"

418

189

229

16

1-1/4" x 1.250"

445

196

249

1-3/8" x 0.750"

328

142

186

1-3/8" x 1.250"

543

237

306

1-1/2" x .600"

304

135

169

1-1/2" x 1.000"

504

226

278

1-1/2" x 1.250"

635

283

352

74 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

Heavy Metal Checking Weights lf you’re tired of the guess work involved when balancing with heavy metal you need heavy Metal tungsten checking weights! Quickly and accurately establish the exact location and amount of heavy metal needed prior to drilling. our check ing weights fit securely between crankshaft counterweights al lowing the exact simulation of heavy metal. get it right the first time everytime! available in 1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4” and 1-3/8” diameters in simulated lengths of 1.200” *made from steel

Part Number Item Description Price CW-100 Checking Weights - 1” Heavy Metal gms ................................................................................................................... 50.00 CW-1125 Checking Weights - 1-1/8” Heavy Metal....................................................................................................................... 60.00 CW-1250 Checking Weights - 1-1/4” Heavy Metal....................................................................................................................... 70.00 CW-1375-1250 Checking Weights - 1-3/8” Heavy Metal for 1.250” long pieces................................................................................... 80.00 CW-1375-750 Checking Weights - 1-3/8” Heavy Metal for .750” long pieces .................................................................................. 80.00 CW-500 Checking Weights - 1/2” Heavy Metal .......................................................................................................................... 30.00 CW-625 Checking Weights - 5/8” Heavy Metal .......................................................................................................................... 35.00 CW-750 Checking Weight - 3/4” Heavy Metal ............................................................................................................................ 40.00 CW-875 Checking Weights - 7/8” Heavy Metal .......................................................................................................................... 45.00 CW-PB Poor Boy Checking Weights - Coupler with bolt - Add Balancing Clay to make any size Chking Wt.................... 7.00

R8 Collet required for straight shanks: 7/16”, 9/16”, 5/8”, 3/4”, 7/8” $125.00 Morse Taper version available for same price

Heavy Metal Start-Up Kit “Get Started Installing and Balancing with Heavy Metal” Getting starled on anything is usually the hardest part, but with the Heavy Metal Start Up Kit you’ll be installing and balancing with heavy metal in no time. We’ve included all the necessary drills and reamers needed for the installation plus enough Heavy Metal for several balance jobs. And just so we could assist you in those balance jobs, we went ahead and included 20 Heavy Metal Checking Weights. These checking weights will enable you to accurately determine the precise amount and location (prior to drilling) where Heavy Metal is needed.

Heavy Metal Start-Up Kit comes with: (10) 1” x 1.200” pieces of heavy metal and (8) checking weights (10) 7/8” x 1.200” pieces of heavy metal and (8) checking weights (10) 3/4” x 1.200” pieces of heavy metal and (2) checking weights (5) 5/8” x 1.200” pieces of heavy metal and (2) checking weights (10) 1/2” x 1.200” pieces of heavy metal and (2) checking weights (2) 7/16” x 7/8” heavy metal dowel pins for Chevrolet (1) Drill bit in each of the following sizes: 31/32”, 27/32”, 23/32”, 19/32”, 15/32” (1) Reamer in each of the following sizes: 1”, 7/8”, 3/4”, 5/8”, 1/2” *specify straight shank or Morse taper when ordering Optional 3/4” straight shank to #3 Morse taper and adapter add $59.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

75

On the ROAD

Rally in SoCal Parts Cleaning Roadshow by Safety-Kleen We had the privilege of attending the parts cleaning roadshow show at the California Speedway last month.

We learned a lot about the different types of cleaning equipment and how they work. Everyone there provided a wealth of information on the best cleaning options. A few of us even had the chance to ride along in one of the NASCAR Racing Experience cars. Thanks to everyone at Safety-Kleen for such a great show!

76 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

77

Quarterly

Giveaways

Beginning 4th quarter 2018 and throughout 2019, all members who join aeRa or renew their membership will be placed in quarterly drawings for special prizes from our Associate Members. our first drawing for all members who join or renew between oct. 1 – Dec. 31, 2018, will have a chance to win a Lincoln Power Mig 140C welder donated by Lincoln Electric and Contingency Connection. This 20-amp 120V mig welder (pictured) features diamond core technology, industrial cast aluminum drive, no-hassle tool-less design, spool gun ready and the toughest PC board protection in the industry.

If you’re not a member, what are you waiting for? There is strength in numbers — and we want you to be part of our team! We are a non-profit organization and that helps keep our membership dues very reasonable. Visit our website to learn more about how we can help you in this great industry.

www.aera.org/giveaways www.aera.org

facebook.com/aeraep

twitter.com/aeraep

THE SOURCE FOR INFORMATION P hone 888-326-2 3 7 2 or 815- 526- 7600 Fax 888-329-2372 or 815-526-7601 • EMAIL info@aera.org

78 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

instagram.com/engineprofessionalmag

Armakleen_PRI_Ad.qxp 9/24/18 3:07 PM Page 1

INTRODUCING THE ROTOSONIC CLEANING SYSTEM Blackstone-NEY Ultrasonics, a division of Cleaning Technologies Group, LLC, is proud to introduce an innovation in a spray and ultrasonic combination aqueous parts cleaning system. The new Rotosonic* will clean heavily soiled parts in a single machine, rather than having to purchase a spray cabinet and an ultrasonic machine separately.

The Onehat T Washeirt All! Does See OSONIC the ROT at the ely Exclusiv ooth S-K B #5349 *The design of this machine is Patent Pending.

www.ArmaKleen.com

From all of us at

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

79

Blizzard Stage III Soda Blaster Using GhostFlow™ Technology

Production applications are what the Blizzard Stage III was designed for, if you have multiple daily shifts we offer dust collector upgrades to 880 sq.ft. with automatic timed reverse pulse cleaning that includes manual over-ride controls.

Clean any part down to the original finish and do it with a water soluble abrasive to eliminate any abrasive residuals and know the part has been unchanged.

95% of the used soda is collected outside the cabinet preventing it from entering the advanced easy clean dust collector with Automatic Timed Reverse Pulse Cleaning Cycle. The Blizzard also includes manual pulse over-ride controls for added cleaning. The Pneumatic Vibratory Cleaning Cycle is also standard allowing the user up to four ways to clean the dust collector to make sure it’s always clean.

STANDARD MACHINE FEATURES

• Four (4) Standard Cabinet Sizes 36x36, 48x36, 48x48 & 6060 (w x d) • 13” x 24” ClearView™ Window with Window Sweep • Easy Clean MERV Tested Cartridge Filters • Auto/Timed Reverse Pulse Dust Collector Cleaning Cycle with manual over-ride controls • Pneumatic Vibrator Dust Collector Cleaning Cycle • Magnahelic Monitor Gauge • 1100 CFM Blower w/ Silencer • Pneumatic Conveyor with 95% Used Soda Collection before the dust collector • Easy to use Soda Pressure Generator • ASME Code 1.0 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 10 to 22 CFM Soda Nozzles • Ergo Flexible Abrasive Hose • Pneumatic Vibrator Soda Feed System

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

80 TRADER MAGAZINE PRI/Winter 2018 trader-mag.com

Is Non-Destructive Cleaning Critical?

Remanufacturing Starts with ARMEX The first step in remanufacturing and rebuilding of engines, transmissions and other components is cleaning. ARMEX has answered the problem of ineffective and time-consuming cleaning processes by launching Re-Man XL, the first abrasive blasting media specifically formulated for the transportation remanufacturing and rebuilding industry.

Hard to clean contaminants are no match for Re-Man XL. With its extraordinary ability to quickly eliminate grease and oils plus the power to remove burnt-on carbon, light rust, gasket materials, coatings and grime all in one-step. Furthermore, Re-Man XL will never damage what you are cleaning, reducing rejected cores and components. If you want to improve your cleaning processes all while saving time and resources Re-Man XL is the only choice.

Before

After

Before

After

ARMEX, the Original Baking Soda Abrasive

Learn more at www.armex

ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc. Pantone 2758 C

trader-mag.com PRI/Winter 2018 TRADER MAGAZINE

81

The Rottler EM79

Specifically Designed for Both the Performance Engine Builder and the Diesel Engine Remanufacturer Performance Racing Engine Builders require a versatile machining center that can handle a wide variety of engine machine work.

Diesel Engine Remanufacturers require an automatic machine that is easy to learn and fast to operate so any block can be machined quickly and accurately. The EM79 offers both!

The EM79 performs multiple jobs such as boring/sleeving, surfacing (heads and blocks), main and camshaft line boring, industrial CNC machining, and can handle a wide variety of engine machine work.

• Manage a variety of work on Dual Workstations and even large diesel blocks with the extra long T-slot Table • Increase productivity with the optional 4th axis roll over fixture • Accommodate production machining with the optional Automatic Tool Changer • For increased safety and chip containment, utilize the optional full enclosure

1-800-452-0534

8029 South 200th Street Kent, WA 98032 USA +1 253 872 7050

THE CUTTING EDGE 82

ROT TLER MFG.COM

youtube.com/rottlermfg facebook.com/rottlermfg

GEAR UP WITH WITH THE THE ROTTLER ROTTLER CYLINDER CYLINDER HEAD HEAD PACKAGE PACKAGE

The SGMTS MANUALMATIC TECHNOLOGY SYSTEM utilizes The SGMTS MANUALMATIC TECHNOLOGY SYSTEM utilizes Rottlers proven UNIPILIOT system giving the fastest results Rottlers proven UNIPILIOT system giving the fastest results and best CONCEN. During seat cutting, simply turn the spindle and best CONCEN. During seat cutting, simply turn the spindle feed steering wheel up and down and the control takes care feed steering wheel up and down and the control takes care of all functions like workhead float/clamp, pilot centering in of all functions like workhead float/clamp, pilot centering in the valve guide and spindle on/off – no buttons! Automatically the valve guide and spindle on/off – no buttons! Automatically changes to finish speed and cuts valve seats to equal depth! changes to finish speed and cuts valve seats to equal depth!

SG7MTS SG7MTS

SG9MTS SG9MTS

The VR10 sets new standards in speed The VR10 sets new standards in speed and accuracy for Performance Racing and and accuracy for Performance Racing and Remanufacturing cylinder head work. The Remanufacturing cylinder head work. The air operated 2 x 3 Ball Precision Chuck air operated 2 x 3 Ball Precision Chuck System eliminates collets. Valve face is System eliminates collets. Valve face is machined concentric to the valve stem for machined concentric to the valve stem for improved sealing, better heat transfer and improved sealing, better heat transfer and reduces mechanical stresses on valves. reduces mechanical stresses on valves.

8029 South 200th Street 8029 200th Street Kent,South WA 98032 USA Kent, WA 98032 +1 253 872 7050USA +1 253 872 7050

VR10 VR10

Call now Call now for special for special discount when discount when purchasing a VR10 purchasing a VR10 together with a SG together with a SG machine machine 8029 South 200th Street 8029 200th Street Kent,South WA 98032 USA Kent, WA 98032 +1 253 872 7050USA +1 253 872 7050

THE CUTTING EDGE THE CUTTING EDGE

ROT TLER MFG.COM ROT TLER MFG.COM

1-800-452-0534 1-800-452-0534 83

THE HONE THAT GROWS WITH YOU Last hone you will ever have to buy!

The Rottler H85A is the only ground level hone that can be upgraded for increased speed and productivity. Start with the Rottler H85A model and as your customer demand increases simply call Rottler to automate your hone. No need to replace the machine with a higher production model.

3 YEAR WARRANTY. Built to last & upgrade.

Guaranteed!

In addition to being fully upgradeable, Rottler hones are proven to last decades in the field. Their rugged base, linear slideways and ball screw with auto lubrication work together to increase life expectancy.

Diamonds reduce abrasive costs by 96% over conventional abrasives!

Rottler Hones pay for themselves in under 5 years.

Call Rottler for details.

Visit us at PRI Booth# 5129 THE CUTTING EDGE

8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050

1-800-452-0534 rottlermfg.com youtube.com/rottlermfg facebook.com/rottlermfg