Trader 146 Summer 2018

WITH NEWEN FIXED-TURNING®®

Always stay one step ahead of the competition. Our latest VISION™ Series allows you to reach new levels of performance.

1

2

FT

FT

®

ONE Machine, ONE Single Tool, COUNTLESS OPPORTUNITIES!

3

®

4

FT ®

SERIES

www.newen.com • www.facebook.com/newenfixedturning

UNLEASH YOUR POWER

FIXED-TURNING FIXED TURNING Unmistakably the best!

®

TM

2

TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE

3

FARRIS EQUIPMENT SALES, INC. “Specializing in Used/Rebuilt Engine Rebuilding Equipment”

3001 Interstate 27 • Lubbock, TX 79404 (806) 762-0887 (800) 882-1808 CYLINDER BORING MILLS & BARS: Winona #VB-320 Boring Mill Rottler #F24B, #F2VB, and #F4VB Air Floats NEW Kwik-Way #FN Portable Bar Kwik-Way #FN-AC/048 Air Float & #FL-AC/EBF Air Float Kwik-Way #FL, #FN, #FW, #FW-VW & #FWS bars Kwik-Way #FL & #FN Overbore Kits Van Norman #999-30 (nice) VALVE GUIDE & SEAT EQUIPMENT: Serdi #100 Sunnen #VGS-20C Winona #PH-2000 & #PH-2000DA Peterson #TCM-25 Kwik-Way #036 & #019

SUNNEN HONING EQUIPMENT & RELATED: #CV-616 Cylinder Hone #CH-100 Line Hone & Mandrels #LBB-1810 Power-Stroked Rod Hones & Shop #LBB-1699, #LBB-1499 & #MBB-1660 Rod Hones & Shop #CRG-750 & #CRG-500 Cap Grinders Tobin-Arp #CG-8400 Cap Grinder Large #CR Mandrels from 2.9” to 4.5” Large #Y104-6562 Special Aluminum mandrels Large Line Hone Mandrels from 3.5” to 5.0” #CK-4000 honing head #HS-30 valve guide hone CYLINDER HONES & ACCESSORIES: Sunnen #CV-616 Hone Rottler #HP-3A Power –Stroked Hone Kwik-Way #088 manual hone w/friction feed Sunnen #CK-4000 Hone Head

HEAD & BLOCK MILL/SURFACERS/FIXTURES: DCM #HB-3800 with adjustable head cradle Berco #RSC-1200 Surfacer w/stone Van Norman #570A Rotary Broach Peterson #72 Dry Rock Surfacer LINE BORE EQUIPMENT: Berco #BC-5 (rebuilt & good cond.)

Kwik-Way #LBM port. units (New & Used)

CRANKSHAFT GRINDERS & RELATED: Berco #RTM-425A Grinder (144” cap) Berco #RTM-351A Grinder (in Ohio) Scledum #RG-350 & #RG-270 Grinders RMC #1200 Grinder (50” cap) GLEASON #M2 WELDER Kwik-Way #259 Magnaflux (90”) Peterson #B-7500 Magnaflux Peterson #CRP-6 straightning press

MISCELLANEOUS: Berco #RAC-1500 Camgrinder; Ammco #6000 & #4000 Brake Lathes; Stewart/Warner #SW-2000 Balancer; Winona & DCM Flywheel Grinder; Pollution Controls #DC-III Oven; AXE & Charley Cockey Head Pressure Testers; Sioux #956 Valve Refacer; Nice Peterson #BK-17 oven; and other equipment too numerous to mention. OUR INVENTORY CHANGES WEEKLY! Check our website for most current listing.

EQUIPMENT NEEDED: SERDI #100 & #60 SEAT/GUIDE MACHINES: Sunnen #CV-616 & #CH-100 Hones, Rottler & Sunnen Seat/Guide Machines; Berco, Winona, or Scledum head/block surfacers; Berco #AB651 rod bore; AXE head pressure testers; DCM, Van Norman, & Winona Flywheel Grinders; Storm Kotifin Crankshaft Polisher; Sunnen #VR7000 or 8000 Valve Refacers: Automotive size CBN Surfacers; Kwik-Way #855, #856, & #860 surfacers; Sunnen #CHW-40 Work Stations; Sunnen #PLB-100 Line Bore; and any other equipment we can make money on. WE WILL PURCHASE 1 PIECE OR ENTIRE SHOPS!

www.farrisequipment.com E-mail: Sam@farrisequipment.com

SAM FARRIS

Sam is ready to make some deals!

4

TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE

5

6

TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

DISCOVER NEW

T E C H N O L O G Y. IDEA S. BUSINESS. DECEMBER 6–8, 2018 INDIANAPOLIS, INDIANA USA The PRI Trade Show provides direct access to the latest in motorsports products, technology and business opportunities from around the world. If you’re in the business of racing you can’t afford to miss this event.

LEARN MORE AT PRI2018.COM

• ALL FORMS OF AUTO RACING • OVER 1100 EXHIBITING COMPANIES • THIS IS A TRADE-ONLY EVENT

T H E B U S I N E S S O F R A C I N G S TA R T S H E R E !

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE

7

ABS Products

The Worlds Largest Inventory of Heavy Metal for Balancing Crankshafts

Finished Pieces

Bar Stock

Flat Plate Heavy Metal Chassis Weights 2-5/8”W x 5-3/8”L x either .140 and .240 Thicknesses; Stackable to bolt on for balancing chassis on Indy cars, stock cars, NASCAR, dragsters ballasts. .140 = 480 grams; .240 = 980 grams Round Bar Stock - 2”D x 2”L & 2”D x 3”L for making your own slugs or chassis balancing.

Round Bar Stock 15”L x 1-1/8”D, 1-1/2”D or 1-3/8”D cut your own crankshaft slugs. Call 714-671-0728

“You Can Be The Best if You Buy From ABS” 591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts 8

TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

UNLEASH YOUR POWER WITH NEWEN FIXED-TURNING®

Always stay one step ahead of the competition. Our latest VISION™ Series allows you to reach a new level of performance.

COUNTLESS OPPORTUNITIES

FIXED-TURNING FIXED TURNING Unmistakably the best!

SERIES

ONE Machine, ONE Single Tool,

www.newen.com • www.facebook.com/newenfixedturning

...a technology concentrate!

®

TM

ERT SPRING 2018 P7.indd 1

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 9

5/29/18 1:21 PM

10 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 11

The Charger Production Pressure Blast Machine uses a large 1.0 cubic foot capacity ASME Coded pressure pot to pneumatically push the abrasive to the part using the nozzle ID size and blasting pressure to determine the compressed air usage.

Pressure Blasters require less cfm to create the same abrasive velocity during operation.

Direct pressure machines produce faster abrasive particle velocity, higher abrasive grain density and greater abrasive frictional heat for heavy coating removal and cross-drill de-burring.

• Three (3) large cabinet sizes all with 36 inch inside height • All three (3) cabinet sizes offer the Space Saving Side Mounted Dust Collector • Operator Platform Included • Direct Pressure can do something siphon can’t….. creates the fastest abrasives velocity….creates the highest frictional heat….blast into blind holes and pneumatically pushes abrasive through cross drill holes.

• Blast using light plastic abrasives or heavy steel shot, steel grits and all the other standard abrasives like glass beads, aluminum oxide, silicon carbide • LED Lighting • Boron Carbide Nozzle, • Large 24” ClearView Operator Window • Air Velocity Window Sweep for better visibility • Clean, Strip, Peen using all abrasive types • Also includes many more Standard Features not listed

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 12

Shown with optional Turntable

JAMISON: your best source for

Automotive Shop Equipment Sunnen CK-10 Powerstroke Cylinder Hone

Sunnen CH-100 Linhone with 2 Mandrels

$11,500

$13,000

Kwik Way FN Boring Bar

Comec RP-1200 CBN Head & Block Resurfacer

$3,250

$13,500

Kansas Instruments BK-17A Bake Oven

PMW 112 Spray Wash Cabinet

Delta Custom Tools

$3,450

$3,500

We are Authorized Dealers for the following lines of parts & equipment:

Look to AXE

PO Box 276 • 1908-11th Street, Emmetsburg, IA 50536 • Fax: 712-852-3570

800-841-5405

www.jamisonequipment.com trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 13

14 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

Comec ACF200– CNC CNC Cylinder Boring/Milling Machine Call us at (888)440-9429 or (800)522-9429 bakerequip@joebakerequipsales.com www.joebakerequipsales.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 15

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Customer Satisfaction is our #1 Priority “T&S Works for You” has been our long-standing mantra and we prove it daily. You call, we’ll answer the phone.

You purchase a balancer from us and we’ll make certain you are fully trained to use it. When you call in for support your concern is considered the most important matter of the day until you’re happy. And your feedback is important to us, it often determines the next new feature or the next new product in our line.

When you talk, we listen. Many of the features and benefits listed below are the direct result of conversations with our valued customers, veteran machinists who’ve become part of the T&S family. There is no substitute for experience in the field, so your opinions matter. Here are just a few…

Made in U.S.A.

The Overhead Drive System is back!

• No more changing belts for various diameters • Extremely versatile - can run on any surface • Quick to change parts out - fast and simple!

Most sophisticated software available!

• Auto-measure at selected calibration RPM • Sensor mapping; no more playing ‘Guess the Angle’ • Mandrel runout compensation for single plane parts

T&S challenges any competitor to balance more sensitively, accurately or faster!

• 3-Second spins with repeatable results • Not just for crankshafts - balance anything that spins!

• Ask about our Tape Test!

T&S is the best value in the industry!

• Don’t pay more for necessary tooling - it’s included!

• Our pricing has your bottom line in mind!

16 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Simple Solutions to Complex Concerns!

PROBAL 500 Deluxe Balancer

Introducing the PROBAL 500 Deluxe Balancer! The new Heavy Metal Drilling Cabinet is built onto the machine so that you no longer have to utilize a separate mill when drilling to add weight. Our rigid drill press assembly is extended to accommodate drilling over the cabinet, and our newly added air lock keeps it in place as you drill. This balance center addresses all your balancing needs!

This machine package will include tooling for heavy metal work on top of our normal automotive tooling.

You won’t find this kind of value anywhere else! Contact us for current pricing!

Versatility with Value In addition to the standard tooling that is included with every balancer we sell, T&S Machines has developed a comprehensive list of products that not only make your balance jobs easier, but also more efficient.

Here are a few of our field-tested and approved add-ons and options!

Made in U.S.A.

• • • • • • •

Universal Flywheel Arbor Expansion Mandrel Set Spade Drill Kit Extended Height Columns Adjustable Height Column Driveline Packages Vertical Balancer for Flywheels/Discs/Drums • And many more!

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 17

17

18 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Get Your CNC Mill

Back Online!

There is an old adage that goes, “If it ain’t broke, don’t fix it!”

The opposite is true as well! Perhaps you have a CNC Mill in your shop and your operating system or your programming interface is dated, erratic or just not as user-friendly as you’d like it to be. We understand that your investment in CNC equipment probably pushed the limits of your budget at the time of purchase, which means if that same machine is not operational or unpredictable now it’s costing you money to sit there. We face the same issues you do from a manufacturer point of view, machines age and require maintenance and when they do you have to call for help.

• • • •

Use existing block fixture or install 10” riser and rotary Integrated probing system Enjoy all the functions of our TS-1000!

Use existing boring heads or upgrade to full industrial tooling available from any industrial tool supplier • Make torque plates, carb flanges or any other part, one-off or production parts!

• Use existing line bore or add The T&S Helical System • Best value in the industry with more features!

Call today and let us help you get your milling machine back online and producing profits for your company!

T&S Technical is a phone call away!

F65 packages available!

Made in U.S.A.

We listen and we respond with solutions!

Upgrade your spindle motor for faster cutting speeds!

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 1919

T&S Machines and Tools, Inc. Toll Free 800-766-2069 • Fax 940-668-8006 www.tnsmachines.com • e-mail: info@tnsmachines.com

Save Your Older Balancer from the Scrapyard!

Dana and Tony from Epoch Industries

Archie Frangoudis - Archie’s Racing Service

“I can’t get my balancer processor to come on, do you have a replacement?”

“My left pickup on my balancer won’t read anything, do you have spare parts for this machine?”

“My balancer reads one correction and then on the next spin it reads 300 grams different, what do I do?”

We hear these desperate questions almost every day in our office at T & S Machines and Tools, Inc. Shop owners have built a business that includes crankshaft balancing or they balance industry-specific parts all day long, every day and then suddenly their 35-year-old balancer goes down. We understand the dilemma and we understand the urgency. Time down is money lost.

T & S now offers the PC-5 Electronic Upgrade to meet the cry of those phone calls we get every day. We have been working for the past 5 years on an upgrade system that has been fine-tuned and tested and now includes the same exclusive balancing software sold on our brand new PROBAL 500 Balance System. The PC-5 Electronic Upgrade will update almost any older soft and hard bearing balancers, both automotive and industrial machines.

With the Sensor Mapping feature we can run any machine at any speed within our mapped range. The software is maintained in-house so we can include unique balancing correction analysis for any industrial balance job as well.

20 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

Automotive Production Dominator Siphon This 100% welded 12 and 14-gauge steel Production Siphon Blaster includes the patented bolt-on internal abrasive separator reclaimer and a long list of included standard features for use with any abrasive 0-150 mesh and gun sizes 25 to 90 cfm.

Three standard cabinet models 3636, 4836 and 4848 all with 36” cabinet heights and side mounted dust collectors for space saving footprint.

• 13”X 24” Large view window • LED Lighting • 10” work ports • Fast Cleaning Siphon Delivery for easy operation and low maintenance • Gun Sizes to 90 cfm for highest frictional heat and fastest cleaning • Quickly remove rust….paint…. carbon….heat discoloration and more using high frictional heat to decrease cleaning time • Space Saving Side Mounted Dust Collector with 700 cfm blower • 220 sq’ MERV Tested Cartridge Filter • Many Part Handling Options Available • Optional HEPA After Filtration for Cell Machine Operations available • Pneumatic Dust Collector Cleaning • More Included Standard Features than any other manufacture of abrasive blasting cabinets in today’s market

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 21

BUSINESS CARD MARKETPLACE

Seat Chuck

#1 (22 a 38mm) #2 (35 a 49mm) #0 (14 a 26mm)

New 14mm to 26mm seat chuck for turning the OD valves in motorcycles and cars. $195.00 for any size. Call 714-671-0728

Subscribe For a free copy of Trader Magazine email your name and mailing address to Submit@Trader-Mag.com or call 714 671-0217

22

To receive our Digital/Online version with Clickable Links email us at Submit@Trader-Mag.com TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

ABS 20 Ton Power Hydraulic Floor Shop Press Ideal for heavy metal installation, removing & installing bearings, bushings, balancers and more!

• Load capacity: 20 ton • Overall height: 61.5" • Table height is adjustable in 5" increments • Working Height 1” to 44.5” • Slide in Press Plate Included • Convenient foot operated air/hydraulic motor • Sliding head allows for offset pressing • Heavy-duty H-frame constructed of highgrade steel

Accessories Included

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 23

24 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

ABS CRANK POLISHERS - 3 SIZES This one is going to Midstream Operations in Colorado. How about yours?

FEATURES:

• Polishes crankshafts up to 55˝ • 2-1/8˝ belt • Aircraft aluminum drive wheel & idlers • Steady rest for doing heavier diesel cranks • 5˝ Chucks • Available to handle up to 32˝, 42˝ & 55˝ center to center See our video at: youtube.com/absproducts

591 W. Apollo Street • Brea, CA 92821 ph (714) 671-0728 fax (714) 671-0836 email: sales@abs-products.com www.abs-products.com

Now Pressure Testing Is Not Just A Service For Your Customer It Also Makes Good Profit For Your Shop!

Precision surfacing that you can rely on to last many generations. Berco has 90 Never miss aof leak in an aluminum head, block plus years manufacturing quality or up to a 53” long diesel head. machines that last a lifetime!

Quick setup and immersion in heated water Join the thousands of shops that have opens up all leaks for a positive test.

experienced the quality of Berco, but nowrotation at an affordable price.

360º of heavy parts lets you see the exact position of leaks.

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 25

“One call to AERA and my problem was solved.”

Whether you’re a one-man shop or a production engine remanufacturer, to maintain an edge in the engine building industry, you need resources you can depend on. AERA is a specialized network of professional engine builders with the expertise and connections to get you the information you need, when you need it.

With an AERA membership, here are just a few of the benefits you’ll receive: • Toll-free technical support from Master Engine Machinists • PROSIS PRO engine spec software to help make your work easier • Automotive Machining Online Training • Custom Training Programs • Six Specification Manuals and Failure Analysis Manual • Engine Professional magazine filled with highly-technical, application-driven articles • Regional conferences that provide technical presentations and unique shop skill instruction to all who attend Even if just one AERA tech bulletin helps prevent an engine comeback, your membership is well worth its dues.

We’re here to help you make your business the best it can be. Join today! www.aera.org/join

THE SOURCE FOR INFORMATION 875 fein berg c o u rt, sui te 106, car y i L 60013 Phone 888-326-2372 or 815-526-7600 fax 888-329-2372 o r 815-526-7601 26 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

THE FINISH LINE ABS carries over 100 different styles and sizes of belts to meet all of your finishing needs!

Soft Back•Diamond•Micro Finish•Hard Back•Cork•Scotch Bright

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 27

28 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

! e r e H s t r a t S n

MENT

G EQUIP

o i t a v Inno BUILDIN GINE RE

EN

Test your engine assemblies for costly return or warranty issues BEFORE you send them out the door

RMC-ETS100 Engine Testing System Key Features: • Heated and filtered oiling system • 15in touch screen operator interface • Engine Specific testing programs w/Admin adjustable variables • Fully customizable controls • Oversized constance torque drive motor • USB or network-able for test results data

RMC V Series CNC machining centers The RMC V series has just gotten better than ever. With the new 9000 series Windows-based touch screen control, our redesigned V series machines give you the tools to stay ahead of your competition.

Call our Sales Team Today!

800-248-5062 or visit our website

www.rmcengine.com trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 29

PowerPeen Direct Pressure Blast Cabinet Optional Mobile Work Cart shown with Polyethylene Turntable, Outside Tracks and Door Modification Optional Rubber Cabinet Liners, Operator Platform with Double Steps.

The ABS Products PowerPeen Direct Pressure Blast Cabinet comes in many different cabinets sizes including 60x60x48H model, choose the one right for your application. If you need a Direct Pressure for Plastic, Glass Beads, Aluminum Oxide, Steel Shot/Grit or any abrasive type between 20 to 120 mesh the Power Peen is the right machine for the job saving dollars on the purchase. It includes a long list of standard features and access to a longer list, almost eighty, of optional features to make blasting the part and machine maintenance easy and simple. Patented Separator Reclaimer sends the spent abrasive and dust into the 220 sq.ft. cartridge dust collector complete with hopper dust storage and pneumatic vibrator cleaning cycle. Advanced LED lighting, window sweep, ASME Coded 1.0 cubic foot pressure pot, MERV tested filter cartridge, operator platform and heavy duty bar work grates and more are all included. Add an optional Mobile Work Cart making quick work of loading hard to handle large parts. Call for added information on the machine and options. 714-671-0728

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 30 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

Power Peen Direct Pressure Included Standard Features • 13” x 24” window with protector • Window sweep • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • LED advanced lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning vibrator • HD bar work grates • MERV tested cartridge, 220 sq.ft.

• Dust storage hopper, 1-1/2 c.f.

• 1.0 c.f. pot capacity • Operator platform included • Boron Carbide Nozzle

Handheld Polisher A Must Have!

This is a must have polisher for machine shops, motor rebuilders, hydraulic rebuilders, motor and engine repair shops. Makes polishing your crank, cam and rack & pinion shafts simple, easy and cost effective. Comes with premium Baldor motor for long life, Reinforced aluminum frame for ease of operation, Long Lasting Ball Bearing rollers which accommodate ¾” to 2” wide belts. Available in 64” or 72” models.

Contact our sales team today!

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 31

JACK SCHOLLER EQUIPMENT

USED EQUIPMENT

CRANKSHAFT GRINDERS Berco RTM 300 Crankshaft Grinder - 94”, Arnold Gauge, Dresser, 2 Steady Rest.................................................... $25,000.00 4 Wheels & Hubs (Used as Roller Grinder) Reconditioned Storm Vulcan 15C Crankshaft Grinder with Chucks, Standard Equipment................................................................ $12,500.00 including 4-Wheels & Hubs Berco Hubs for 225 & 270.................................................................................................................................................. $275.00

GUIDE & SEAT MACHINES Serdi 3.1 Diesel Valve Guide & Seat Machine.............................................................................................................. $27,500.00 Serdi 1.1 Guide & Seat Machine with Tooling.............................................................................................................. $19,500.00 Peterson TCM25 Guide & Seat Machine with 180 Degree Fixture.............................................................................. $4,500.00 Peterson TCM25 Guide & Seat Machine with 360 Degree Fixture............................................................................... $5,500.00 Peterson TCM25 Guide & Seat Machine - Variable Speed with Air Lock Fixture........................................................ $6,500.00 DCM HMC2000 Guide & Seat Machine.......................................................................................................................... $6,500.00 Newen Gen II Guide & Seat Machine with Tooling...................................................................................................... $13,500.00

PRESSURE TESTERS Master Tool lPT48A Pressure Tester with Power Rollover............................................................................................ $4,500.00 Delta Pressure Tester, 15” Width, Standard Tooling...................................................................................................... $4,500.00 Master Tool Pressure Tester - 38”.................................................................................................................................. $3,500.00 Peterson PT38 Pressure Tester...................................................................................................................................... $3,500.00 Master Tool Head Oven................................................................................................................................................... $1,000.00

VALVE GRINDERS Kwik-Way SVS Valve Grinder.......................................................................................................................................... $2,500.00 Sioux 2075 Valve Grinder................................................................................................................................................ $2,500.00

SURFACE MACHINES Berco ST461 Surface Grinder - Standard Tooling....................................................................................................... $22,500.00 Add: CBN Hub for..................................................................................................................................................... $2,000.00 Kwik-Way Master Head & Belt Surfacer......................................................................................................................... $2,500.00

ROD HONES, ROD BORING, CAP GRINDERS, ROD HEATERS Sunnen 1699 Rod Hone.................................................................................................................................................. $2,500.00 Peterson CG87 Cap Grinder.......................................................................................................................................... $1,800.00 Sunnen CRG750 Cap Grinder......................................................................................................................................... $1,250.00 Sunnen 1299 Rod Hone..................................................................................................................................................... $950.00 RMC-70 Cap Grinder with Heavy Duty Factory Table................................................................................................... $2,500.00

CYLINDER HONE - LINE HONE Sunnen Line Hone Mandral - 15RY4500........................................................................................................................ $2,000.00 Sunnen Rod Hone Cabinet................................................................................................................................................ $500.00 Sunnen CRH-50 Connecting Rod Heater.......................................................................................................................... $750.00 Sunnen CRG-770 Cap Grinder....................................................................................................................................... $1,350.00

Office: 704-924-6803 Jack: 704-906-7980 Sterling: 717-377-1587 Scott: 404-488-4378 32 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

157 Wedgeway Drive • Statesville, NC 28677

FLYWHEEL GRINDERS Peterson FG24 Flywheel Grinder.................................................................................................................................... $4,500.00 Winona FG5000 Flywheel Grinder.................................................................................................................................. $4,000.00

FLOW BENCHES Super Flow SF-300 Flow Bench..................................................................................................................................... $3,000.00

BORING BARS Berco ACP151A/M Cylinder Boring Machine, 45 & 30 Degree Fixtures....................................................................... $8,500.00 Tool Sharpener, Standard Tooling RMC100 Boring Stand with Waida 01 Boring Bar......................................................................................................... $6,000.00 Waida 02 Boring Bar - No Tooling.................................................................................................................................. $1,500.00 Kwik-Way FL Boring Bar with Standard Tooling & Tool Box......................................................................................... $4,500.00

CLEANING EQUIPMENT Trinco Glass Bead Machine & Filter............................................................................................................................... $1,250.00 RMC Rinse Booth with Turntable................................................................................................................................... $1,250.00 Empire Glass Bead Cabinet - 48 “ x 48”........................................................................................................................ $1,800.00 Peterson AB502 Steel Shot Blaster................................................................................................................................ $2,500.00 Peterson 2845 Steel Shot Blaster................................................................................................................................... $4,500.00 Peterson Parts Tumbler...................................................................................................................................................... $950.00 Peterson SC2233 Spray Washer, Electric, 3-Phase, 5 HP............................................................................................. $3,500.00 Kwik-Way 209 Spray Washer - Reconditioned, Electric Heat, 26” Turntable 40” Working Height, 7-1/2 HP......................................................................................................................................... $4,000.00

MISCELLANEOUS Ammco 4000, 4100, 3000, 7000 Drum & Disc Lathes...............................................................................................Call for Price 6 - Air Compressors...................................................................................................................................................Call for Price New Dowell Pin Puller Set.................................................................................................................................................. $175.00 New Piston Pin R & R Set.................................................................................................................................................. $175.00 New Sioux Tapered Pilots.................................................................................................................................................... $37.50 Diamond Flywheel Stones................................................................................................................................................. $175.00 New - Portable Crankshaft Polisher.................................................................................................................................. $700.00 Sioux Seat Grinding Stones - 1-1/8” through 1-1/2”............................................................................................................ $8.95 Sioux Seat Grinding Stones - 1-9/16” through 1-15/16”...................................................................................................... $9.50 Sioux Seat Grinding Stones 2” through 2-1/2”................................................................................................................... $10.50 Sioux Seat Grinding Stones 2-3/4” through 3-1/4”............................................................................................................ $17.50 Kwik-Way Seat Grinding Stones - Same Sizes and Prices as Sioux Sunnen Rod Hone Mandrals - CR, PL, KL, LJ, 4UL Series......................................................................................Call for Price Acer Mill........................................................................................................................................................................... $3,500.00 Nugier 100 Ton Press...................................................................................................................................................... $7,500.00

SEE WEBSITE FOR CURRENT LIST

email: jackschollerequipment@roadrunner.com

www.jackschollerequipment.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 33

Pro Degree Wheel Pointers - $60.00 Rigid and adjustable with a window sight for accurate cam degreeing.

Fits all blocks with a threaded hole on the front, including engines with extra long crank snouts such as a Mopar HEMI and Ford FE. Window can also be located behind the wheel. This will allow you to remove the degree wheel easily for timing adjustments.

Works great will all degree wheels through 16” or larger depending on the mounting hole.

3-jaw Jeweler’s Chuck ------------- $325.00 Both chuck & degree wheel ----------- $495

18” Degree Wheel is made from 6061 Billet Aluminum and has a sturdy design with easy to read markings.

Part #ST-DegreeWheel-18 -------------------- $225.00 Pointer ------------------------------------------$60.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts

34 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

PERFECTLY ROASTED with a hint of

VANILLA “Discover A carefully smooth blend of

Arabica organic beans”

www.rocknrollcoffeeco.com trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 35

$750.00 HT-6300

Hollow Rams $550.00 HT-6000

Press Ram $200.00 HT-4000 Hollow rams with bolts are used for dampener installation, rocker arm pulling.

1.625” Travel

1.625” Travel

3.000” Travel

$250.00 ea.

2.250 14 pitch

2.750 16 pitch

Puller Plates HT-275016

HT-125014

1/2”

5/16” & 3/8” T-wrenches for rocker arm pulling; LS7 16mm, 1-1/2 pitch threads; Big Block 16mm, 200 pitch thread; Chinese Eagle Crank 5/8” Coarse thread; Ford 3/4”

7/16” Dampener Wrenches for installation $79

ST-LS7 $250.00

Rocker Arm T-Wrench - 4340 chrome moly heat-treated steel w/ rolled threads $200.00 ea.

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

36 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

HT 4000 Dampener Puller Kit: 1 ea. HT 4000 RAM .................$200.00 1 ea. HT-125014 Puller Plate ....$250.00 3 ea. 7/8” Plungers .................$150.00 1 ea. Bolt Kit .........................$200.00 Total .....................................$800.00 Pump & Hose .........................$350.00 Complete ........................... $1,150.00

HT 6000 LS7 Dampener Puller Kit: 1 ea. HT-6000 RAM ............... $550.00 1 ea. HT-275916 Puller Plate ... $250.00 3 ea. 3/4” Plungers ............... $150.00 1 ea. Bolt Kit ........................ $200.00 ST-LS7 ................................. $200.00 Total ................................. $1,350.00 Pump & Hose ........................ $350.00 Complete .......................... $1,700.00

Heat treated 4340 chrome only preheat treated. T-wrenches are $200.00, available in either 5/16” or 3/8”.

Hydraulic Stud Puller Kit:

For 1/4” hose quick disconnect!

HT-6000 RAM ............$550.00 3/8” T-Wrench ...........$200.00 5/16” T-Wrench .........$200.00 Total........................$950.00 Pump & Hose ............$350.00 Complete .............. $1,300.00

For 3/8” hydraulic hose quick disconnect!

ph 714-671-0728 fax 714-671-0836 abs-products.com sales@abs-products.com youtube.com/absproducts

Custom Tools for Performance & Rebuilder Shops trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 37

Pollution Control Workstations

$7,900

.00

Pollution Control Workstations PCE-4736

47˝ W x 36˝ D, 440 sq. in. filter, removable dust pan, fiberglass grate, plexiglas enclosed top that swings up out of the way for loading, swings down to keep particles out of shop, single motor on the back 3/4 HP @ 750 cfm.

Move up to 2HP, 1100 cfm blower.

Upgrade from ABS-4228, this is the latest pollution control workstation from ABS Products.

This machine is a must in today’s market where you are working with plastic, fiberglass and carbon fiber that you have to keep out of your lungs.

See More Pollution Control Workstations and many other products: www.youtube.com/absproducts 591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com 38 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

Downdraft Tables with Turntables We are delivering 3 new Downdraft Tables with Turntables to LKQ/Amada of Texas for blowing off blocks and deburring parts.

Downdraft 36’ turntable, 2 HP, 1150 CFM for blowing off parts, 440 square feet of fire retardant air filters, non-scratch plexiglass, new-style metal frame.

CALL TO ORDER YOUR CUSTOM SOLUTION TODAY!

714-671-0728

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 39

Multi-Abrasive 2-station Blasting Cabinets for Production Engine Rebuilders!

PowerPeen 6048

We built this super-flexible two-station blasting system for Gary Kehrer at Platinum Performance Group in Sunnyvale, TX. Gary works on aircraft engines such as the Lycoming prop engine cases pictured above. There is also a photo of the welded steel tubing that works as an engine mount to hold those engines in.

They are stripped down to remove paint and magnafluxed, Gary’s shop does it all.

He also works on Continental flat 6’s, race boats, aluminum magnesium heads from different manufacturers.

Shot peening, plastic media, glass bead, all runs through this versatile production quality machine.

If you run a large production shop like Gary’s we have the custom blasting machines you need.

This makes an EXCELLENT shot peening cabinet for diesel cranks or anything!!!

Tools for Performance Racing Engine Builders 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts 40 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

Excellent maching for shot peening cranks!

In fact that’s what we designed it for!

The welded steel tubing that works as an engine mount Lycoming prop engine.

Lycoming prop engine cases on turntable and dolly system, entering the blaster.

Domestic, Japanese and European

Nozzles for shot peening, blasting and plastic media!

• A2 tool steel • Heat treated to 80 Rockwell • 6” x 1/2” OD 90 degree nozzle • 5” x 1/2” OD straight nozzle • 3” x 1/2” OD straight nozzle • 4-1/2” x 3/8” OD 90 degree nozzle • 3” x 3/8” OD straight nozzle

Each nozzle: $250.00 Full set: $1250.00

www.americangasket.biz trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 41

THE SAFEST WAY TO STORE CRANK SHAFTS! ABS Products has the Crank Racks to get your shop organized & your stock safely stored!

CH-1 Crank Rack

CH-1 Crank Rack with optional top, V-blocks and one cam hanger.

CH-2 Double Crank Rack

CH-2 Double Crank Rack shown with 32” tubes on the bottom and 26” tubes on the upper level.

Each level holds between 20-24 cranks depending upon the model.

ST-VB- Plastic V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks. Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)................................... $149.00

Cranks hang on adjustable flanges Each crank rack contains flanges that can be adjusted to suit your specific crank inventory.

This is a rack for every crank.

SAVE MONEY AND FLOOR SPACE!

2 Crank Racks can be connected together with two connecting sections (ES2) to create a 3 space rack

591 West Apollo Street • Brea, CA 92821 phone 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts 42 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

System on Best Storage the market!

Can Be Arbors perately!

Se Bought

Mill Mounted Drilling Platform

ST-VB- V-Blocks High Density Plastic V Block for Measuring and Inspection of Cams and Cranks.

Designed to work with a 1/2” Electrical Conduit. 24” will work with a LS Crank Shaft (an affordable alternative to our Precision VB if you only need to measure & inspect)

$149.00

ABS-Products.com Call 714-671-0728

ROD WEIGHING FIXTURES & ROD CENTER Digital Scales also available with 4000 gram capacity by either gram or 1/10 gram increments

Drilling Platforms for Hines & Winona Balancers

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

Crank & camshaft storage rack shown with 4 rows of crank hangers and 2 rows of cam hangers. Comes with a set of plastic v-blocks and table-top insert.

Crank Rank - Single (as pictured) (42” x 37” x 48”High, 300 lbs.)

CR-CH-1 .......................................................................... $995.00 Crank Rack - Double (42” x 42” x 14” 230 lbs. shipped flat) CR-CH-2........................................................................ $1,245.00 Crank Rack - Triple CR-CH-3 ....................................................................... $1,745.00 Crank Rack - Inserts (pair) Optional Table Top for the rack.

CR-ES-3 ............................................................................. $95.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

For $40.00 you can change 2 rows to Cam Hanger they will hold 4 Big Block or 5 Small Block Cams. You will still have 3 rows to hold Cranks.

Tools, Equipment, Machines for Engine Builders & Rebuilders trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 43

3030 PowerPeen Industrial Direct Pressure Each abrasive delivery method (siphon and direct pressure) has its own “best applications” just like engines open to atmosphere and engines using boost to overcome one atmosphere. Each model also has its best application for the cabinet size; one size does not fit all! The PowerPeen 3030 is the smallest cabinet size in a seven cabinet lineup. The 3030 is a compact size with all the features included making it an Industrial Direct Pressure Cabinet in a smaller package.

Use for shot peening quick replacement parts or use for glass bead, plastic and all the other media types.

Standard Features • 13” x 24” window with protector • 10” work ports • Control panel with all air controls • Safety door switch • Large access door, lockable • 700 cfm blower with silencer • Treadle pedal, full front • Advanced LED lighting • Patented separator reclaimer • Abrasive mixing flow control valve • Pneumatic dust collector cleaning • Bar work grates • MERV tested cartridge, 220 sq.ft.

• Dust storage hopper, 1-1/2 c.f.

• 1.0 c.f. pot capacity, Charger model • Operator platform Included • Boron Carbide Nozzles

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 44 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

5.0 CRANK&CAM POLISHER

Over 50 years of polisher manufacturing experience and we never stop improving our products. Our new 5.0 versions make cleaning and micro polishing crankshafts, camshafts and rack & pinion shafts fast and easy. With variable speed control, spring loaded polishing belt arm for quick and easy belt changes, heavy duty, long lasting frame and components.

///////////////////////////////////////////// Please contact us for a spec sheet and pricing.

Many types of shafts and cylinders can also be polished on our machines. Standard sizes are 32”, 42” and 48” centers. Custom sizes also available upon request. /////////////////////////////////////////////// Crankshaft Polisher (714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

Camshaft Polisher 45

The Hurricane Wet Blast Machine, For A Finer Finish Media Blast manufactures more than 170 standard models and sizes of blasting cabinets with over 80 optional features for increased productivity, durability, and operator safety. Our extensive line of Wet, Dry, Siphon and Direct Pressure blast cabinet models includes specialty machines for automotive, aerospace, military, precision focused micro blasting, plastic stripping, soda blasting, tumble part processing and shot peening. Cartridge dust collectors, HEPA after filters and separate standing timed reverse pulse cleaning dust collectors are included as standard sandblasting equipment or available option upgrades. The Hurricane Wet Blaster has many applications in the automotive field to include 3-D printing, processing wheels, chemically clean part surface, zero abrasive embedment and the elimination of frictional heat capable of damage and part distortion.

Standard Features • Stainless Steel Cabinet • Seal-less Slurry Pump • 25 to 28 % Abrasive Suspension for faster processing • Negative Pressure Cabinet with Mist Collector Blower and Filter • LED Cabinet Lighting • Positive Locking Window Seal

591 West Apollo Street Brea, CA 92821 Phone (714)257-0484 mediablast.com 46 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 47

ALL NEW, Pro G/S The Pro G/S is a more compact cabinet using smaller amounts of compressed air designed for shops with limited floor space and smaller part volumes. The Pro G/S was designed specifically for use with Grit and Shot or combinations of the two. Applications Finishes and Camouflage Repairs. The included casters allow the machine to be rolled into position,used, and then moved to a stored location.

Attached Dust Collector

FEATURES & BENEFITS • Duplicates Original Factory Finishes • Camouflage Surface Repairs • Reaches Down Into Deep Cylinder Ports • Compact Footprint with Casters • Negative Pressure 100% Welded Dust Collector • 90 sq. ft cartridge filtration • Semi-Automatic Dust Collector Vibrator Cleaning Cycle • Advanced LED Lighting • ASME Coded Pressure Pot with Access Port • LG. 13X24” view window

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 48

STANDING ON THE GAS SINCE 1963.

Mickey Thompson was unstoppable. He was the first American to 400+MPH at Bonneville & the manager of Lions Drag Strip. At heart, Mickey was a drag racer, now his DNA lives on in the innovative winning products we build today while we continue to break records in professional drag categories.

UNCOMPROMISED CONSTRUCTION / UNDISPUTED PERFORMANCE. #MICKEYTHOMPSONTIRES M/T PROUDLY MAKES TIRES IN THE USA.

MICKEYTHOMPSONTIRES.COM

49

GARAGE AND SHOP ORGANIZERS The Pioneer Steel line of high quality garage and shop organizers meet the high standards you demand for your shop or garage. These new products are a great way to store and organize those loose items and will give your garage, shop or enclosed trailer a cleaner look. Pioneer Steel now has exactly what you need at an affordable price. Over 30 sizes and styles to choose from; made of high quality steel and available in white, red or black durable powder-coat finish. MOUNTING HARDWARE INCLUDED!

2 ROW AEROSOL CAN HOLDER Capacty: 8 cans

2000W 2000R 2000B

SMALL OIL BOTTLE SHELF Capacty: (6) 1 QUART BOTTLES

2010W 2010R 2010B

SMALL AEROSOL CAN RACK Capacty: 6 cans

2002W 2002R 2002B

LARGE OIL BOTTLE SHELF Capacty: (12) 1 QUART BOTTLES

2014W 2014R 2014B

LARGE AEROSOL CAN RACK Capacty: 12 cans

2006W 2006R 2006B

COMBINATION STORAGE SHELVES

2016W 2016R 2016B

PHONE: (714)255-0526 • FAX: (714) 257-0184 50

LARGE OIL BOTTLE HOLDER Capacty: (8) 1 QUART BOTTLES

2008W 2008R 2008B

LOCKABLE ORGANIZER WITH STORAGE SHELF

2022W 2022R 2022B

TOOL BOX

R103

TOOL BOX

HR19

TOOL BOX

R1182-02 R1182-03

PIONEER STEEL CO.

sales@pioneersteelusa.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 51

CLASSIFIEDS SHOPS FOR SALE Complete Machine Shop with Service Bays On a Main Street in Springfield Oregon.

In business for 35 years Please contact Jeff for more info: Jeffccaldwell@aol.com phone: 541-914-6490 Bob’s Machine Shop The best automotive machine shop for sale in Southern California. Gross $350,000 to $500,000 in labor alone, asking $350,000 or best offer. 50 years in business, owner wants to retire age 76. Caters to automotive dealer programs.

If interested, text: 818/ 391-3453 I’ll call you back.

Custom 10’ Crank Polisher Extra-large, production crank polisher for those big diesel cranks.

Designed and built to handle the extra weight and length of large heavy cranks, 10’ 7” between centers. Uses 5-7/8” x 77” belts.

Contact us for additional details and price.

ABS Products 714-671-0728

High Performance Auto Parts & Machine Shop Currently building and selling top quality high performance engines, trans and rear-ends for retail and wholesale markets for over 40 years. Strategically located in northcentral Virginia with no competition within 40 miles in all directions. This full service business provides the new owner exceptional growth potential.

Interested buyers inquire by phone: 540-840-0060 or e-mail: bcauto69@bcauto69.net

“New” 8˝ Self-Centering Lathe Chuck

Shop Equipment For Sale: Bed Mill 32z 40x with block & surfacing fixtures, Align bore, Align hone 4 bars, SV10, Colchester lathe, Bridgeport with Turner balancer, Chevalier 10x50, Sharp long column 10x50 with cylinder head fixtures & tooling, ABS Pressure Blaster, Blast it all glass bead, 12 in wide belt sander, Rottler boring bar w/stand, Rod hone, Tobin-arp cap grinder, rinse booths, Gorbel shop crane, Valve grinding booth w/tooling, Neway seat cutters, Flow bench, Tear down carts, BHJ & duramax tooling. North Carolina. 910-523-2110

Bertco RTM 260A Crank Grinder

• 8-Inch 3-Jaw Scroll • 2.55-Inch Bore • Plain back • 1 set of jaws • Wrench & mounting screws included $199.00 ABS Products: 714 671-0728

• Overhead and radius dresser • 9 Wheel/hubs-chucks/live centers • 2 Steady rests $18,000

Magnaflux 4160 Wet Mag $4000 Toby’s Engine Parts Randy: 805-965-8541 tobysengineparts@cox.net

Advertise now in the Trader Classifieds, Call: 714/ 671-0217 www.trader-mag.com 52 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

AD RATES, SPECIFICATIONS & DEADLINES

www.trader-mag.com

The Trader Magazine, your most affordable advertising Call 714.671.0217 for M specials! trader-mag.com outlet!

35 Year Anniversary SUMMER 2018 TRADER AGAZINE 53

The Ultimate Piston Fixtures Jaws can be sold separately for any ring width: 3/16˝ down to .5 mm!

10” Tilting Rotary Table with 8” Chuck & special Piston Jaws

Standard ABS Piston Fixture

See the video: YouTube.com/absproducts Special Diesel Jaws for 6”& 8” Chuck

Special Chuck for Machining Sleeves

Jaws available for 6” & 8” chucks.

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

IMPORT TUNERS & MOTORCYCLE BUILDERS: We have many new jaws for small bore motors!!!

7-1/2” Blank Piston Fixture Jaw: We machine this to fit YOUR ring groove! Or you can purchase blanks and machine yourself.

Available for 6” and 8” chucks as well. www.performancetradermagazine.com

54 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

Update your Piston Ring Grinder to an ABS Ring Grinder!

START SAVING TIME with our Ring Grinders available with Micron Disk, HD Disk or Diamond Plated Hubs.

We have what you need for any type of ring!

Complete with Micron Disk Micron Disk, 1 - 4” Turntable ---$1,455.00 Micron Disk, 1 - 5” Turntable ---$1,555.00 Micron Disk, 1 - 6” Turntable ---$1,655.00 Diamond or Borzon Disk ----------$325.00

New Scotch Brite Buffing Wheel RG-5953 -----$10.50 ea.

New Felt Buffing/Deburring Wheel RG-5952 ---$14.75 ea.

New Stick-On Disks RG-5956 --------------10 for $50.00 12 pack of Micron Disks --------------------------$19.25 50 pack of Micron Disks --------------------------$65.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 fax 714-671-0836 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 55

N-200 Stage II Soda Blaster Using GhostFlow™ Technology

STANDARD MACHINE FEATURES • Three (3) Cabinet Sizes • 36x36, 48x36 & 48x48 (w x d) • 13” x 24” ClearView™ Window • Easy Clean MERV Tested Cartridge Filter • Pneumatic Vibrator Dust Collector Cleaning Cycle • Reverse Pulse Dust Collector Cleaning Cycle • 700 CFM Blower w/ Silencer • Easy to use Soda Pressure Generator with Control Panel • ASME Code 0.8 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 9 to 22 CFM Soda Nozzle • Large Side Access Door • Pneumatic Soda Feed System

The N-200 Stage II Soda Blasting Cabinet is one of the most popular of the NEW Soda Models using larger cabinets and larger dust collector sizes.

This allows the user to operate longer hours and access other part handling options important to soda blasting applications.

This is a great choice for cleaning many automotive parts like automotive heads when you want the original finish and a soluble abrasive to eliminate any abrasive residuals.

The Patented Separator Reclaimer prevents 95% of the used soda from transferring into the dust collector. This unique design allows longer daily machine operation and more daily part production.

Downdraft Cabinet Airflow using GhostFlow™ Soda Delivery Technology and Used Soda Dropout are what make ABS Products the leaders in soda cabinet technology.

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts 56

Check the water jackets, individual combustion chambers, bolt hole and valve jobs without the hassle of bolting on plates or submerging the cylinder head!

1. Floor to Floor in 3 minutes 2. Set up time less than one minute 3. Cast Iron and Aluminum Heads 4. Separate Work Station 5. Easy 6. Profitable

714-671-0728 abs-products.com

VT-3 Vacuum Tester (incl. pump, all parts listed below) $1,750.00 VT-5 Vacuum Tester (incl. pump, all parts listed below) $2,395.00

VT-1250-R-F 1-1/4” round pad with fitting .................$35.75 VT-216-R-F 2-1/16” round pad with fitting ...............$32.95 VT-2000-3000-F 2”x 3” pad with fitting ...........................$32.95 VT-3000-3000-F 3”x 3” pad with fitting ...........................$34.95 VT-2500-4500-F 2-1/2” x 4-1/2” pad with fitting .............$35.75 VT-1250-R 1-1/4” round pad without fitting ............$21.80 VT-2750-R 2-3/4” round pad without fitting ............$21.80 VT-2000-3000 2”x 3” pad without fitting ......................$21.80 VT-3000-4000 3”x 3” pad without fitting ......................$21.80 VT-2500-4500 2-1/2” x 4 1/2” pad without fitting .......$24.80 VT-3000-4000 3”x 4” pad without fitting ......................$22.80 VT-6000-6000 6”x 6” pad without fitting ......................$24.95 VT-3-TP 11”x 35” table pad for VT-3 ...................$62.95 VT-5-TP 17”x 45” table pad for VT-5 ...................$73.70 VT-SP-14 14 mm spark plug adapter ....................$39.00 VT-SP-18 18 mm spark plug adapter ....................$49.00 VT-BHA Bolt hole adapter ...................................$35.20 GA-M Manifold with liquid filled gauge .........$495.00 GA-LG Liquid filled gauge .................................$80.00 VT-3-H 1/4” vacuum hose ..................................$39.00 VT-RV Release valve ..........................................$42.00 VT-TA Table adapter .........................................$10.00 VT-FP Foot pedal ..............................................$62.95 VT-T3 VT-3 table only .....................................$275.00 VT-3-P 3 CFM pump .........................................................$328.98 VT-5-P 5 CFM pump ........................................$475.00 trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 57

The Best Surfacer The Best On The Planet!

Surfacer On The Planet!

Precision surfacing that you can rely on to last many generations. Berco has 90 Precision that youquality can rely on plus yearssurfacing of manufacturing to last many generations.

Berco has 90 machines that last a lifetime! plus years of manufacturing quality machines that last aoflifetime!

Join the thousands shops that have experienced the quality of Berco, but Now at an an affordable affordable price. price you can join now at the thousands of shops that have experienced the quality of Berco.

58 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

COBRA STAGE I SODA BLAST CABINET

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 59

Get Abrasive!

ABS Blasting Media Abrasives for all Applications.

Cleaning parts, removing paint, powder coating, surface blending or surface preparation, ABS has the right type of blasting media for all your needs. We keep a wide variety of types and sizes in stock.

Give us a call to discuss which abrasive will work best with your application and machine.

BAKING SODA PLASTIC MEDIA

STEEL GRIT

ALUMINUM OXIDE

STEEL SHOT

(714)671-0728 ABS-Products.com sales @abs-products.com info@ abs-products.com youtube.com/absproducts 60

GLASS BEADS

36˝ x 36˝ Special Shot Peening System w/ track

ABS Products Dual Feed PowerPeen • • • • • • • •

36” x 36” shot peener with track and turntable designed to be moved by forklift, run on 110V, be portable 10” arm holes large window rubber lined interior lighting top of the line!

Small step available!

We make these up to 60” x 60” and larger! Call us for your custom shop needs!

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 61

NEW! Stainless Steel Piston Ring Grinder Stainless Steel Ring Grinder: Our New ultimate ring grinder is made of 303 Stainless Steel. Offering features such as: • Dead Nuts (automatic indicator zero reference return) • The adjustable ring mounting plate has a special 1 inch T-nut allowing complete usage of the abrasive wheel and has ring reference Indicator grooves, for faster and easier initial set up.

• Additional adjustable stops for grinding oil rings.

• New improved billet stainless ring clamp screws • It offers a high performance variable speed motor • 0-2750 rpms

CWT

Turntables are available in 3 sizes. 4”, 5” and 6” • The 4” table accommodates bore sizes from 2.300” to 4.000” • The 5” table accommodates bore sizes from 3.500” to 5.000” • The 6” table accommodates bore sizes from 4.500” to 6.000

New! 1” slot and adjustment system!

Add a Borzon or Diamond Grinding Disk to any unit for an additional $325.00

Choice of Grinding Disks • PSA Micron Disks • Borzon Grinding Disks are available in 180, 220, 320 grit • Diamond Grinding Disks are available in 180, 220, 320 grit • Deburring wheels are available in Cratex or Scotch Brite

RG-9000-D – Ultimate Stainless Steel Ring package contains all 3 turntables and a Diamond or Borzon wheel – $2495.00

Micron

Diamond or Borzon

RG-9000-4 - Disk, 4” Turntable ..................................$1,455.00 ...... $1,755.00 RG-9000-5 - Disk, 5” Turntable ..................................$1,555.00 ......$1,855.00 RG-9000-6 - Disk, 6” Turntable ..................................$1,655.00 ......$1,955.00

Piston Ring Squaring Tool

• Fast, easy and repeatable fixture for squaring • Rings in the bore prior to setting end gaps.

Covers bores from 2.000” to 5.000” and will clear head studs.

• Places rings 1.000” below the deck to get past head bolt distortion.

• No wrenches required.

• Change bore sizes in RG-9000-T-6 6” Turntable RG-9000-T-5 5” Turntable RG-9000-T-4 4” Turntable seconds! from 3” to 6” rings - $450 from 3” to 5” rings - $400 from 2” to 4” rings - $350 • NEW! Goes from 5.0” - 8.0” all the same features. Red Anodized.

ST-RST - 2.0” - 5.0” - $90.00 ABS Products • 714-671-0728 ST-RST-D - 5.0” - 8.0” - $120.00 ST-RST-3 - New 3” depth - $50.00* ABS-Products.com • youtube.com/absproducts *for use with Torque Plates

Wingnuts machined from billet stock just for us!

62 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

$190.00

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 abs-products.com sales@abs-products.com youtube.com/absproducts trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 63

64 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 65

591 West Apollo Street • Brea, CA 92821 ph 714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

66 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 67

68 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

69

70 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

71

72 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

Mention This Ad For A Special Discount

Balancing Slugs, Pins, Plates & Bars

Our heavy metal arrives finished, ready to install, oversized by .002-.003 for a precise press fit. We have the best quality, largest inventory and over 30 years experiences with heavy metal for crankshaft and chassis balancing.

Contact our sales team today!

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

• Hundreds of sizes in stock • Custom sizes available upon request • We can cut weld chamfers on any order trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 73

EASY REFERENCE BALANCING CHARTS HEAVY METAL BALANCING WEIGHT GAIN CHART DIA. X LENGTH

CONVERSION CHART OUNCES TO GRAMS

TUNGSTEN

STEEL

NET GAIN

7/16" x .875" 1/2" x .750" 1/2" x 1.000"

38 43 57

17 19 25

21 24 32

1/2" x 1.200" 1/2" x 1.250"

65 72

30 31

35 41

5/8" x 1.000"

91

39

52

5/8" x 1.200"

109

47

62

5/8" x 1.250"

114

49

65

3/4" x 1.000"

122

56

66

3/4" x 1.200" 3/4" x 1.250"

147 162

67 70

7/8" x 0.500" 7/8" x 0.700" 7/8" x 0.750"

87 117 127

7/8" x 1.000" 7/8" x 1.100" 7/8" x 1.200"

OZ

GRAMS

1/16

=

1.77

1/8

=

3.54

3/16 1/4

= =

5.31 7.08

5/16 3/8 7/16 1/2 9/16

= = = = =

8.85 10.62 12.39 14.16 15.63

80 92

5/8 11/16

= =

17.70 19.47

38 54 58

49 63 69

3/4

=

21.24

13/16

=

23.04

7/8

=

24.78

169 186 198

77 85 92

92 101 106

7/8" x 1.250"

210

96

114

1" x 0.500"

111

50

61

15/16 1 2 3 4

= = = = =

26.55 28.35 56.70 85.05 113.40

1" x 0.700"

153

70

83

5

=

141.75

1" x 0.750" 1" x 0.850"

164 190

75 85

89 105

6

=

170.10

1" x 1.000"

227

100

127

1" x 1.100"

243

110

133

7 8 9

= = =

198.45 226.80 255.15

1" x 1.200"

265

120

145

10

=

283.50

1" x 1.250"

275

125

150

1-1/8" x 1.000"

282

127

155

1-1/8" x 1.200"

325

153

172

1-1/8" x 1.250"

350

160

190

11 12 13 14

= = = =

311.85 340.20 368.55 396.90

1-1/4" x 1.000"

346

157

189

15

=

425.25

1-1/4" x 1.200"

418

189

229

16

=

453.60

1-1/4" x 1.250"

445

196

249

1-3/8" x 0.750"

328

142

186

1-3/8" x 1.250"

543

237

306

1-1/2" x .600"

304

135

169

1-1/2" x 1.000"

504

226

278

1-1/2" x 1.250"

635

283

352

74 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

Heavy Metal Checking Weights lf you’re tired of the guess work involved when balancing with heavy metal you need heavy Metal tungsten checking weights! Quickly and accurately establish the exact location and amount of heavy metal needed prior to drilling. our check ing weights fit securely between crankshaft counterweights al lowing the exact simulation of heavy metal. get it right the first time everytime! available in 1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4” and 1-3/8” diameters in simulated lengths of 1.200” *made from steel

Part Number Item Description Price CW-100 Checking Weights - 1” Heavy Metal gms ................................................................................................................... 50.00 CW-1125 Checking Weights - 1-1/8” Heavy Metal....................................................................................................................... 60.00 CW-1250 Checking Weights - 1-1/4” Heavy Metal....................................................................................................................... 70.00 CW-1375-1250 Checking Weights - 1-3/8” Heavy Metal for 1.250” long pieces................................................................................... 80.00 CW-1375-750 Checking Weights - 1-3/8” Heavy Metal for .750” long pieces .................................................................................. 80.00 CW-500 Checking Weights - 1/2” Heavy Metal .......................................................................................................................... 30.00 CW-625 Checking Weights - 5/8” Heavy Metal .......................................................................................................................... 35.00 CW-750 Checking Weight - 3/4” Heavy Metal ............................................................................................................................ 40.00 CW-875 Checking Weights - 7/8” Heavy Metal .......................................................................................................................... 45.00 CW-PB Poor Boy Checking Weights - Coupler with bolt - Add Balancing Clay to make any size Chking Wt.................... 7.00

R8 Collet required for straight shanks: 7/16”, 9/16”, 5/8”, 3/4”, 7/8” $125.00 Morse Taper version available for same price

Heavy Metal Start-Up Kit “Get Started Installing and Balancing with Heavy Metal” Getting starled on anything is usually the hardest part, but with the Heavy Metal Start Up Kit you’ll be installing and balancing with heavy metal in no time. We’ve included all the necessary drills and reamers needed for the installation plus enough Heavy Metal for several balance jobs. And just so we could assist you in those balance jobs, we went ahead and included 20 Heavy Metal Checking Weights. These checking weights will enable you to accurately determine the precise amount and location (prior to drilling) where Heavy Metal is needed.

Heavy Metal Start-Up Kit comes with: (10) 1” x 1.200” pieces of heavy metal and (8) checking weights (10) 7/8” x 1.200” pieces of heavy metal and (8) checking weights (10) 3/4” x 1.200” pieces of heavy metal and (2) checking weights (5) 5/8” x 1.200” pieces of heavy metal and (2) checking weights (10) 1/2” x 1.200” pieces of heavy metal and (2) checking weights (2) 7/16” x 7/8” heavy metal dowel pins for Chevrolet (1) Drill bit in each of the following sizes: 31/32”, 27/32”, 23/32”, 19/32”, 15/32” (1) Reamer in each of the following sizes: 1”, 7/8”, 3/4”, 5/8”, 1/2” *specify straight shank or Morse taper when ordering Optional 3/4” straight shank to #3 Morse taper and adapter add $59.00

714-671-0728 sales@abs-products.com abs-products.com youtube.com/absproducts

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 75

ABS Products • 714-671-0728 • www.abs-products.com Item

Description

1 thru 9

10 thru 24

25 thru 49

50 thru 99

100 Plus

HM-437-875

Heavy Metal 7/16" x 7/8" Dowel Pins

$23.18

$20.97

$19.53

$18.14

$16.80

HM-437-1100

Heavy Metal 7/16" x 1.100" Dowel Pins

$25.84

$23.40

$21.97

$20.58

$19.17

HM-500-500

Heavy Metal 1/2" x .500"

$10.05

$9.02

$8.30

$7.73

$7.27

HM-500-750

Heavy Metal 1/2" x .750"

$16.49

$14.54

$13.61

$12.45

$11.32

HM-500-830

Heavy Metal 1/2" x .830"

$18.14

$15.84

$14.83

$13.56

$12.32

HM-500-850

Heavy Metal 1/2" x .850"

$18.45

$16.63

$15.56

$14.25

$12.94

HM-500-900

Heavy Metal 1/2" x .900"

$19.07

$17.24

$16.17

$14.95

$13.59

HM-500-950

Heavy Metal 1/2" x .950"

$19.68

$17.63

$16.56

$15.34

$13.97

HM-500-1000

Heavy Metal 1/2" x 1.000"

$20.10

$18.05

$16.61

$15.47

$14.53

HM-500-1100

Heavy Metal 1/2" x 1.100"

$22.33

$20.11

$18.69

$17.00

$15.67

HM-500-1200

Heavy Metal 1/2" x 1.200"

$24.13

$21.81

$20.36

$18.27

$16.57

HM-500-1250

Heavy Metal 1/2" x 1.250"

$25.44

$22.82

$21.13

$19.52

$18.33

HM-625-750

Heavy Metal 5/8" x .750

$21.95

$19.02

$17.10

$15.30

$13.94

HM-625-1000

Heavy Metal 5/8" x 1.000"

$28.93

$25.96

$24.04

$22.23

$20.88

HM-625-1100

Heavy Metal 5/8" x 1.100"

$33.10

$28.96

$26.91

$24.88

$23.19

HM-625-1200

Heavy Metal 5/8" x 1.200"

$35.25

$31.66

$29.31

$27.16

$25.12

HM-625-1250

Heavy Metal 5/8" x 1.250"

$36.16

$32.46

$30.03

$27.74

$26.09

HM-750-750

Heavy Metal 3/4" x .750"

$28.90

$27.42

$25.92

$24.46

$22.96

HM-750-800

Heavy Metal 3/4" x .800

$29.97

$28.49

$26.99

$25.53

$24.03

HM-750-1000

Heavy Metal 3/4" x 1.000"

$31.39

$30.37

$29.58

$25.08

$25.97

HM-750-1100

Heavy Metal 3/4" x 1.100"

$33.85

$30.73

$32.06

$31.06

$28.38

HM-750-1200

Heavy Metal 3/4" x 1.200"

$36.09

$34.96

$33.85

$32.72

$30.32

HM-750-1250

Heavy Metal 3/4" x 1.250"

$38.80

$37.33

$35.83

$34.36

$32.87

HM-875-500

Heavy Metal 7/8" x .500"

$19.62

$18.84

$18.27

$17.15

$16.13

HM-875-700

Heavy Metal 7/8" x .700"

$26.80

$26.15

$25.25

$23.89

$22.79

HM-875-750

Heavy Metal 7/8" x .750"

$27.95

$26.87

$26.07

$25.17

$24.33

HM-875-800

Heavy Metal 7/8" x .800"

$33.70

$30.32

$29.52

$28.62

$27.77

HM-875-1000

Heavy Metal 7/8" x 1.000"

$35.75

$32.23

$29.99

$28.69

$27.79

HM-875-1100

Heavy Metal 7/8" x 1.100"

$38.83

$35.25

$33.03

$31.15

$30.25

HM-875-1200

Heavy Metal 7/8" x 1.200"

$41.25

$37.66

$34.22

$33.52

$31.72

HM-875-1250

Heavy Metal 7/8" x 1.250"

$45.52

$40.85

$37.81

$34.96

$33.61

HM-1000-500

Heavy Metal 1" x .500"

$20.00

$19.59

$18.84

$18.19

$17.64

HM-1000-700

Heavy Metal 1" x .700"

$28.23

$27.42

$26.63

$25.57

$24.71

HM-1000-750

Heavy Metal 1" x .750"

$30.02

$29.81

$28.23

$27.37

$26.49

HM-1000-800

Heavy Metal 1" x .800

$32.61

$31.99

$30.42

$29.54

$28.67

HM-1000-825

Heavy Metal 1" x .825"

$33.08

$32.61

$31.30

$30.43

$29.55

HM-1000-880

Heavy Metal 1" x .880"

$35.18

$34.45

$33.12

$32.14

$31.07

HM-1000-1000

Heavy Metal 1" x 1.000"

$40.01

$39.15

$37.66

$37.55

$35.32

HM-1000-1100

Heavy Metal 1" x 1.100"

$42.26

$41.60

$40.43

$38.40

$36.60

HM-1000-1200

Heavy Metal 1" x 1.200"

$43.64

$42.59

$41.07

$39.80

$38.52

HM-1000-1250

Heavy Metal 1" x 1.250"

$46.72

$44.92

$43.13

$41.40

$40.66

76 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

ABS Products • 714-671-0728 • www.abs-products.com

We stay stocked up!

is ad for Mention th unt! rice disco p n m lu o c next

We will cut weld chamfers upon request.

Item

Description

1 thru 9

10 thru 24

25 thru 49

50 thru 99

100 Plus

HM-1000-1260

Heavy Metal 1" x 1.260"

$47.32

$45.53

$43.42

$41.69

$40.94

HM-1125-760

Heavy Metal 1 1/8" x .760"

$56.84

$55.75

$54.66

$53.56

$52.47

HM-1125-800

Heavy Metal 1 1/8" x .800"

$57.90

$56.81

$55.72

$54.62

$53.51

HM-1125-1000

Heavy Metal 1 1/8" x 1.000"

$58.92

$57.83

$56.75

$55.64

$54.53

HM-1125-1100

Heavy Metal 1 1/8" x 1.100"

$60.66

$59.50

$58.35

$57.25

$56.08

HM-1125-1200

Heavy Metal 1 1/8" x 1.200"

$62.39

$61.22

$60.08

$58.92

$57.75

HM-1125-1250

Heavy Metal 1 1/8" x 1.250"

$64.71

$63.99

$62.32

$61.11

$59.96

HM-1125-1260

Heavy Metal 1 1/8" x 1.260"

$65.56

$64.86

$63.18

$61.98

$60.77

HM-1125-1850

Heavy Metal 1 1/8" x 1.850

$75.68

$72.97

$71.29

$70.08

$68.88

HM-1250-1000

Heavy Metal 1 1/4" x 1.000"

$67.53

$66.32

$64.97

$63.83

$62.57

HM-1250-1100

Heavy Metal 1 1/4" x 1.100"

$69.89

$68.67

$67.32

$66.18

$64.91

HM-1250-1200

Heavy Metal 1 1/4" x 1.200"

$72.24

$70.89

$69.36

$68.20

$66.88

HM-1250-1250

Heavy Metal 1 1/4" x 1.250"

$74.55

$73.18

$71.77

$70.40

$69.04

HM-1375-500

Heavy Metal 1 3/8" x .500"

$67.37

$66.01

$64.60

$63.23

$61.89

HM-1375-750

Heavy Metal 1 3/8" x .750"

$77.18

$75.76

$74.34

$72.92

$71.67

HM-1375-1000

Heavy Metal 1 3/8" x 1.000"

$81.56

$80.00

$78.55

$77.00

$75.28

HM-1375-1200

Heavy Metal 1 3/8" x 1.200"

$83.86

$82.34

$80.73

$79.22

$77.67

HM-1375-1250

Heavy Metal 1 3/8" x 1.250"

$86.18

$84.72

$83.58

$81.42

$80.06

HM-1500-1000

Heavy Metal 1 1/2" x 1"

$118.48

$116.91

$115.47

$113.92

$112.20

HM-1500-1250

Heavy Metal 1 1/2" x 1250"

$122.30

$120.73

$119.28

$117.73

$115.89

HEAVY METAL BARS are sold by the inch in length Item

Description

Price/Inch 1”W x 12”L

HM-312-4500

Heavy Metal Bars 5/16”H x 4-1/2"L

$25.00/Inch

$112.50

HM-375-6000

Heavy Metal Bars 3/8”H x 6"L

$25.00/Inch

$150.00

HM-437-4000

Heavy Metal Bars 7/16”H x 4"L

$25.00/Inch

$100.00

Item HM-500-12000

Description Heavy Metal Bars 1/2" H x 12" L

Price/Inch 1”W x 12”L $20.10/Inch $241.20

HM-625-12000 HM-750-12000

Heavy Metal Bars 5/8" H x 12" L

$28.93/Inch

$347.16

Heavy Metal Bars 3/4" H x 12" L

$31.39/Inch

$376.68

HM-875-12000

Heavy Metal Bars 7/8" H x 12" L

$35.75/Inch

$411.12

HM-1000-12000

Heavy Metal Bars 1" H x 12" L

$40.01/Inch

$480.12

HM-1125-12000

Heavy Metal Bars 1-1/8" H x 12” L

$58.92/Inch

$621.46

HM-1250-12000

Heavy Metal Bars 1-1/4" H x 17” L

$67.53/Inch

$810.36

HM-1375-12000

Heavy Metal Bars 1-3/8" H x 12" L

$81.56/Inch

$978.72

HM-1500-8000

Heavy Metal Bars 1-1/2" H x 12" L

$118.48/Inch $1,421.76 trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 77

78 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 79

Blizzard Stage III Soda Blaster Using GhostFlow™ Technology

Production applications are what the Blizzard Stage III was designed for, if you have multiple daily shifts we offer dust collector upgrades to 880 sq.ft. with automatic timed reverse pulse cleaning that includes manual over-ride controls.

Clean any part down to the original finish and do it with a water soluble abrasive to eliminate any abrasive residuals and know the part has been unchanged.

95% of the used soda is collected outside the cabinet preventing it from entering the advanced easy clean dust collector with Automatic Timed Reverse Pulse Cleaning Cycle. The Blizzard also includes manual pulse over-ride controls for added cleaning. The Pneumatic Vibratory Cleaning Cycle is also standard allowing the user up to four ways to clean the dust collector to make sure it’s always clean.

STANDARD MACHINE FEATURES

• Four (4) Standard Cabinet Sizes 36x36, 48x36, 48x48 & 6060 (w x d) • 13” x 24” ClearView™ Window with Window Sweep • Easy Clean MERV Tested Cartridge Filters • Auto/Timed Reverse Pulse Dust Collector Cleaning Cycle with manual over-ride controls • Pneumatic Vibrator Dust Collector Cleaning Cycle • Magnahelic Monitor Gauge • 1100 CFM Blower w/ Silencer • Pneumatic Conveyor with 95% Used Soda Collection before the dust collector • Easy to use Soda Pressure Generator • ASME Code 1.0 C.F. Pressure Pot • Pot Access Port • Easy Soda Loading Hopper • 10 to 22 CFM Soda Nozzles • Ergo Flexible Abrasive Hose • Pneumatic Vibrator Soda Feed System

(714)671-0728 ABS-Products.com sales@abs-products.com youtube.com/absproducts

80 TRADER MAGAZINE SUMMER 2018 35 Year Anniversary trader-mag.com

Is Non-Destructive Cleaning Critical?

ARMEX Is The Only Choice When cleaning parts that cannot have the specifications or surface tolerances change, the only blasting abrasive to use is ARMEX. Other hard blasting abrasives can remove surface materials, damage threads and change the specifications along with surface tolerances rendering the parts unusable.

The gentle physical propriety of baking soda but yet aggressive cleaning ability is what makes ARMEX the only choice. ARMEX is environmentallyfriendly and soluble. It can dissolve in water, oil, antifreeze and transmission fluid. Because ARMEX is soluble it will never leave blasting particles behind in critical or hidden passageways like other hard blasting abrasives which can increases the risk of parts failure when placed back into service.

Use ARMEX to clean, de-grease, remove burnt on carbon and paint on a wide variety of materials including steel, aluminum, lead, alloys, plastics, rubber and composites.

Before

After

Before

After

ARMEX for When Non-Destructive Cleaning is Critical.

Learn more at www.armex.com

Before & After

ARMEX and ARM & HAMMER are trademarks of Church & Dwight Co., Inc. Pantone 2758 C

trader-mag.com 35 Year Anniversary SUMMER 2018 TRADER MAGAZINE 81

THE PERFORMANCE ADVANTAGE Simple. Economical.

Forward Thinking.

Surface finish is critical and it’s imperative to replicate block after block with consistency.

The Rottler H5A accomplishes this with accuracy and features you can rely on.

• Count on a true, constant and accurate crosshatch angle the entire length of the bore with machine feeding stones to specified load during honing process and withdrawing stones before stopping.

• Rottler Plateau Mode loads to proper stone pressure before starting rotation and counts down number of strokes.

• Have confidence using Diamonds and CBN stones saving money with built-in Crash Protection that prevents tearing up hone heads, stone holders and diamond/CBN abrasives.

• Be ready for the future and utilize Modern CNC Windows based software with online capabilities for training and trouble shooting.

• Save your operator time maintaining coolant with superior filtration and roll out coolant tank.

CNC

• 3 year warranty guarantees quality and reliability

at a price you can afford THE CUTTING CUTTING EDGE EDGE THE 82

8029 South 200th Street, Kent, WA 98032 USA+1 253 872 7050 www.youtube.com/rottlermfg www.facebook.com/rottlermfg contact@rottlermfg.com

1-800-452-0534 www.rottlermfg.com

VR10

LIMITED TIME DISCOUNT* Call your Local Rep for Details!

The most accurate Valve Refacer available today!

The Rottler VR10 sets new standards in speed and accuracy for Performance Racing and Remanufacturing cylinder head work. The air operated 2 x 3 Ball Precision Chuck System eliminates collets. Valve face is machined concentric to the valve stem for improved sealing, better heat transfer and reduces mechanical stresses on valves.

• Reduce operator fatigue and improve surface finish on the valve seat face for superior sealing and cooling with Turcite Slideways

• Grind a wide range of valve stem diameters without changing parts (no collets or wrenches required) with our pneumatic operated quick action 2 X 3 ball precision chuck driven by a heavy duty variable speed gear motor.

• Extremely accurate run-out for improved sealing, better heat transfer and reduced mechanical stress on valves due to the 2 X 3 ball chuck.

• Months of maintenance-free grinding with our large, filtered coolant tank built right in to the optional cabinet!

* For a limited time, a special discount is being offered on purchases of a VR10 with a Rottler Seat & Guide machine (SG7MTS, SG8MTS or SG9MTS). Call your Rottler Representative or Distributor today for details!

8029 South 200th Street Kent, WA 98032 USA +1 253 872 7050

THE CUTTING EDGE

ROT TLER MFG.COM

1-800-452-0534

83

your machining time, productivity & profits!

AUTOMATION MADE EASY! • Designed for both the one man job shop and production shops, providing improved accuracy and productivity • Set the job, start the program and walk away letting the machine work guide-to-guide automatically • Labor savings over manual machines • Triple Air Float Centering System for best CONCENtricity • Machine a complete set of valve seats and valve guides unattended with Guide-to-Guide Automatic Operation • Maximize productivity and save time with the Pneumatic Clamping Fixture

Visit www.rottlermfg.com for full feature details

customers

8029 South 200th Street Kent, WA 98032 USA+1 253 872 7050 1-800-452-0534

THE CUTTING EDGE

www.youtube.com/rottlermfg www.facebook.com/rottlermfg contact@rottlermfg.com