Fitting Instructions
TOWBAR J17U For Jaguar XF 2015Jaguar XE 2016-
MATERIALS A 1 Cross Bar B 2 M12 x 35 x 1.75p Bolts SCP 1 Safety Chain Plate X 8 Existing Bumper Beam Fasteners ZE 1 Retractable Electrical Plate ZN 1 Neck Kit (Series 3002 for XF, Series 3022 for XE) FITTING 1. Remove Bumper (wheel arch screws, screw behind wheel arch liner, screws/clips along bottom edge, screw under small square plastic cover adjacent to each light cluster) 2. Remove Steel Bumper Beam 3. Fit Cross Bar (A) to the same fixing points as the Steel Bumper Beam by re-using existing Bumper Beam fasteners 4. Assemble the chosen Neck Option (ZN), safety Chain Plate (SCP) and Retractable Electrical Plate (ZE) to Cross Bar (A) using separate Fitting Instructions from Neck Kit. Note: If fitting a detachable neck, use 2-off fasteners supplied with the neck and longer fasteners (B) on Safety Chain Plate side. 5. Cut under-tray section of bumper using the diagram below as a guide and refit to vehicle. Recommended torque settings: Grade 8.8 bolts: M8 - 24Nm, M10 - 52 Nm, M12 - 80 Nm, M14 - 130 Nm, M16 - 200 Nm Grade 10.9: M12 – 120Nm, M10 – 70Nm M8- 35Nm
#NAME? W 0 0 0 1 J 1 7 U - F IT $ 0 1 1 6 0 2 0 1 0 0 0 0