Fitting Instructions
TOWBAR CH12A For Jeep Grand Cherokee 2005Jeep Commander 2006-
MATERIALS A 1 Towbar Mainframe with European facing to 94/20/EC A50-1 D 4 M12 x 100 x 1.75mm HT Bolts (Grade 10.9), M12 Washers and Lock Washers E 1 ZEP35 Electrical plate (not shown) CB 2 M16 x 50 x 2.0mm Coupling Bolts, Nuts, Lock Washers CP 1 10mm Coupling Packer FITTING 1. Lower spare wheel. Remove 2 plastic pull clips to give access. Attach towbar Mainframe (A) to rear cross member using Bolts (D). Tighten Bolts. 2. Raise spare wheel. Notes: This towbar must be used with either a Witter Towball (part number Z11) or Class A50-1 or A50-X towball dimensionally Conforming to A50-1 with a ‘D’ and 'S' value greater than or equal to that of the towbar. This towball can also be used in conjunction with a Witter drop-plate giving a ball height reduction of 75mm (Witter part no. Z98) Please refer to the vehicle specification for the trailer weight and nose limits, which must be observed. Recommended torque settings: Grade 8.8: M8 - 27Nm, M10 - 53 Nm, M12 - 95 Nm, M14 - 150 Nm, M16 - 214 Nm / Grade 10.9: M12 – 120Nm, M10 – 70Nm M8- 35Nm
WITTER TOWBARS Deeside Ind. Park, Deeside, CH5 2NY witter-towbars.co.uk
µW0001CH12A-FIT$021103150000ÊÄ W0001CH12A-FIT$021103150000
Issue 2