Page 1

Rev 2:1

675E

FLANGE NECK

Powder Coated Finish

Components Code

Quantity

F

1

Bolt Kit

Description

Flange Neck

Code

Quantity

A G

2 2

w493

Description

12x100 Bolts, Nuts & Grip Washers 16x50 Set Screws, Nuts & Grip Washers

1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com


Rev 2:1

675E 675ED 675ES

Powder Coated Finish

BMW 5 SERIES SALOON (E60) 2003-2010 & TOURER ESTATE (E61) 2004-2010 e11*94/20*8264*00 w428

Components

Mainframe

Code

Quantity

CB

1

Description Crossbar

Bolt Kit Code

Quantity

Description

WB

8

10mm Large Round Washers

B

8

10x40 Set Screws & Grip Washers

(Neck Type) Detachable 'D'

Please See Detachable Neck Box Contents List

Please See Detachable Neck Box Contents List

Swan Neck 'S'

Please See Swan Neck Box Contents List

Please See Swan Neck Box Contents List

Flange Neck 'F'

Please See Flange Neck Box Contents List

Please See Flange Neck Box Contents List

1. Remove bumper (2 torx screws behind trim panels in the boot, 5 push clips along wheel arch, plus clips along bottom edge of bumper). Disconnect reversing sensor loom. Remove and discard bumper crush beam. 2. Attach mainframe CB to the existing captive nuts on back panel using set screws B with washers WB. Fully tighten set screws. 3. Refit bumper and reversing sensor loom. Detachable Neck: Atttach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB using CPE10 plates (standard orientation) with set screws Y & bolts W Flange Neck: Attach to crossbar CB using bolts A. Attach type approved towball (not supplied) using fasteners G. 4. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com


Rev 2:1

675E 675ED 675ES

Powder Coated Finish

BMW 5 SERIES SALOON (E60) 2003-2010 & TOURER ESTATE (E61) 2004-2010

VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-

Bolt Torque Settings Bolt Size (mm)

Pitch Torque Setting (mm) (Nm) 8.8 Tensile

5

0.80

6.09

6

1.00

10.50

8

1.25

25.30

10

1.25

46.00

10

1.50

50.90

12

1.25

83.00

12

1.50

87.81

12

1.75

87.27

14

2.00

139.00

16

2.00

213.00

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com

675E  
675E