Page 1

Rev 2:1

173E

FLANGE NECK

Powder Coated Finish

Components Code

Quantity

F

1

Bolt Kit

Description

Flange Neck

Code

Quantity

A G

2 2

w493

Description

12x100 Bolts, Nuts & Grip Washers 16x50 Set Screws, Nuts & Grip Washers

1. Loosely attach flange neck F using bolts A. 2. Loosely attach type approved towball (not supplied) using set screws G. 3. Tighten all fixings using a calibrated torque tool to the torque settings specified on the towbar drawing.

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com


Rev 2:3

173E 173ED 173ES

Powder Coated Finish

CITROEN Berlingo (SWB) & Multispace (SWB) 2008PEUGEOT Partner L1 (SWB) & Tepee 2008(Exc First Model) E11 55R-019971 w639

Components Code Mainframe

Quantity

Bolt Kit

Description

Code

Quantity

Description

CB

1

Crossbar

WA

2

12mm Large Round Washers

STL

1

Strap Left

WB

6

12mm Small Round Washers

STR

1

Strap Right

WC

4

10mm Small Round Washers

ANG

2

Angle

B

2

12x50 Set Screws & Grip Washers

C

6

12x35 Set Screws, Nuts & Grip Washers

NT

4

10mm Nuts & Grip Washers

(Neck Type) Detachable 'D'

Please See Detachable Neck Box Contents List

Please See Detachable Neck Box Contents List

Swan Neck 'S'

Please See Swan Neck Box Contents List

Please See Swan Neck Box Contents List

Flange Neck 'F'

Please See Flange Neck Box Contents List

Please See Flange Neck Box Contents List

1. Remove and retain fixings from lower corners of bumper for easier access. 2. Remove the lowest fixing bolt from the impact beam on either side. 3. Insert crossbar CB up inside the bumper & loosely attach to the lowest points of the impact beam using set screws B with washers WA. 4. Loosely attach angles ANG to the threaded studs on the chassis rails using nuts NT with washers WC. 5. Loosely attach straps STL & STR on short wheelbase models (L1) or straps STL & STR (PT612S supplied separately) on long wheelbase models (L2) to angles ANG and to crossbar CB using set screws C with washers WB. Detachable Neck: Attach to crossbar CB using set screws Z. Swan Neck: Attach to crossbar CB with CPE10 plates (standard orientation) using set screws Y & bolts W. Flange Neck: Attach to crossbar CB using set screws A. Attach type approved towball using set screws G. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing. 7. Refit fixings from lower corners of bumper.

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com


Rev 2:1

173E 173ED 173ES

Powder Coated Finish

CITROEN Berlingo (SWB) & Multispace (SWB) 2008PEUGEOT Partner L1 (SWB) & Tepee 2008(Exc First Model)

VOLKSWAGEN PASSAT SALOON/ ESTATE 2014-

Bolt Torque Settings Bolt Size (mm)

Pitch Torque Setting (mm) (Nm) 8.8 Tensile

5

0.80

6.09

6

1.00

10.50

8

1.25

25.30

10

1.25

46.00

10

1.50

50.90

12

1.25

83.00

12

1.50

87.81

12

1.75

87.27

14

2.00

139.00

16

2.00

213.00

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.

Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com

www.towsure.com

173E  
173E