Rev 2:1
117E
Powder Coated Finish
RENAULT MASTER VAN FWD (Without Step) (Exc RWD) 2010VAUXHALL MOVANO VAN FWD (Without Step) (Exc RWD) 2010NISSAN NV400 FWD (Without Step) (Exc RWD) 2010e11*94/20*8445*01
Components Code
Quantity
Description
Bolt Kit Code
Quantity
WA
8
12mm Large Round Washers
2
16x60 Bolts, Nuts & Grip Washers
w1052
Description
CB
1
Crossbar
LSA
1
Left Side Arm
C
RSA
1
Right Side Arm
A
10
12x40 Set Screws & Grip washers
B
2
12x40 Set Screws, Nuts & Grip Washers
1. Remove towing eye from left hand chassis rail and retain with the vehicle. 2. Locate the 4 threaded mounting points on each chassis rail and clean out. 3. Loosely attach side arms LSA and RSA to each chassis rail using set screws A with washers WA. 4. Loosely attach crossbar CB to side arms LSA and RSA using set screws A and B with washers WA. 5. Attach preferred type approved coupling (not supplied) using bolts C. 6. Check and tighten all fasteners using a calibrated torque tool to the specified torque settings recommended on the towbar drawing.
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT This product is finished in a revolutionary industry leading powder coat finish.
Towsure Products Limited, Holme Lane, Hillsborough, Sheffield, S6 4JR T: 0114 250 3000 E: sales@towsure.com
www.towsure.com