Step 1. Start by unbuckling the straps and locating the blue sticker at the top of the brace.
Step 2. Apply the brace to the leg and align the hinge with the center of the knee.
Step 3. Starting with the strap marked with the #1, wrap it around your leg, securing the strap to the corresponding buckle.
Step 4. Once the strap is secured, lift the rubber tab and pull until the desired level of compression is achieved. Repeat the process with straps #2, #3, and #4.
Step 5. To adjust the valgus/varus use the tool provided if needed to appropriately offload the knee cavity, starting with the upper adjustment point rotate the hex key clockwise or counterclockwise until the knee cavity has been properly offloaded.
Step 6. Repeat this process for the lower adjustment point as shown. Final Proper fit: Walk with the brace now fitted and then make any adjustments needed until pain relief is achieved.