HIGH PRESSURE
COMPRESSOR TJEP 9/20 HP
Do you have enough air ?
Is the compressor limiting your efficiency ?
The wrong choice of compressor often causes unstable performance of your nailers and, consequently, great annoyance during the workday. Good specifications do not always equal stable and ample air supply. Price and quality often go hand in hand – and that also applies to compressors.
The TJEP brand is your guarantee for high quality compressors. TJEP compressors are robust and reliable machines that have been designed to give you an efficient workday – every day!
Check out the wide range of TJEP compressors and accessories on our website, where you will also find a guide for selecting the right compressor. Please visit www.tjep.eu
COMPRESSOR
TJEP 9/20 HP
SPECIFICATIONS
The compressor has been tested and approved by demanding craftsmen worldwide. With its low weight and high performance, the compressor is suitable for both small and large tasks. Item no. 123074
With
Item no. 123090
PRESSURE
High Pressure facts
Generally, High Pressure distinguishes itself by the combination of high impact and lightweight compact tools.
High Pressure allows the nail guns to be smaller, making them considerably lighter than conventional compressed air guns. This reduces the load on your body and thereby improves your daily work.
– LIGHT AND HANDY TOOLS !
COMPACT COIL NAILER
TJEP PC 90 HP
High Pressure coil nailer with high power for nailing shuttering, plywood, etc.
Nail length 45-90 mm. For CN and PC nails.
Item no 100174
FOR PLASTIC AND WIRE COLLATED NAILS
USED FOR: Fascia boards - wood, Outside siding, Shuttering.
The high constant air pressure, allows you to use a long hose without any pressure loss!
For mounting shuttering, chipboard, wooden fascia boards, pallets, plates, outside siding etc.
High Pressure coil nailer for mounting facing, wooden frames, eaves board etc. Nail length 25-50 mm. For MX nails.
Item no 100193
High Pressure concrete nailer is perfect for nailing in concrete and drywall steel rails. Pin length 15-25 mm. For CPPW pins. Item no 100195
BRAD NAILER
MAKITA AF550H HP
High Pressure brad nailer for panelling, architraves etc. Brad length 15-55 mm. For TF-18 brads.
Item no 100191
MAKITA AN635H HP
High Pressure coil nailer for mounting hard gypsum, panels, boards, eaves, chipboards, etc. Nail length 26-65 mm. For FB, CN and PC nails.
Item no 100184
HIGH PERFORMANCE WITH HIGH PRESSURE!
With the TJEP High Pressure range of nail guns, hoses and compressors, you never run out of air – not even when the last nail is shot.
TJEP High Pressure are, above all, effective tools making the job easier due to their compact size, while contributing to a better working environment
TJEP High Pressure nailers are characterized by the well-known high TJEP quality, ensuring the craftsman hassle-free operation.
The TJEP High Pressure compressor is made from sturdy components for high reliability.
Read more about the TJEP High Pressure products on www.tjep.eu or visit your local dealer and learn more.
NEW
COIL NAILER
MAKITA AN935H HP
High Pressure coil nailer for mounting outside siding, pallets, plates, boards, eaves boards, Fascia boards etc.
Nail length 45-90 mm. For CN and PC nails.
Item no 100185
FASTENERS FOR HIGH PRESSURE WOOD, CONCRETE AND STEEL
WILL FIT
MAKITA AN250HC HP
CPPW CONCRETE-/STEELPIN
Dimension Item no. Pcs./box Box/pal.
CPPW 30/15 839278 1,000 240
CPPW 30/19 839280 1,000 240
CPPW 30/22 839282 1,000 240
CPPW 30/25 839284 1,000 240
TJEP CPPW CONCRETE PINS
WILL FIT
MAX HN120
CPPW CONCRETE-/STEELPIN, STEPPOINT Dimension
CPPW 34/30 839504 1,000 96
CPPW 34/35 839507 1,000 96
CPPW 34/50 839510 1,000 96
CPPW TWISTED CONCRETE-/STEELPIN
CPPW 34/38 839522
34/50 839524
34/65 839526
Besides the wide range of nails for wood, TJEP offers a variety of concrete and steel nails, as well as High Pressure screws. visit your local TJEP dealer or learn more at www.tjep.eu.
TJEP FB NAILS, 15°
WILL FIT
MAKITA AN610H HP, AN636H HP MAX HN65
FB STEEL NAIL, FULL HEAD
Dimension Item no. Pcs./box Box/pal.
FB 23/30* 839538 6,000 40
FB 29/38* 839540 6,000 40
*With CE approval EN 14566
FB STEEL NAIL, FULL HEAD
Dimension Item no. Pcs./box Box/pal.
FB 25/27 839548 3,600 100
TJEP CPAW CONCRETE PINS
WILL FIT
MAX HN120
CPAW CONCRETE-/STEELPIN, FULL HEAD
Dimension Item
CPAW 34/19 839248 1,000 96
MAKITA AR411HR HP, AR412HR HP HP SCREWS FINE THREAD, HARD DRYWALL
TJEP HP SCREWS, 0 0
WILL FIT
MAKITA AR411HR HP, AR412HR HP
HP SCREWS COMBI, DRYWALL/STEEL/WOOD
*With CE approval EN 14566
