Tekform Slimline Drawer

Titus Group Product brochure

Tekform Slimline Drawer

2018

Important Information

Technical information While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confirm the up to date specification before ordering. Due to constant improvement of products presented in the catalogue, we can make changes at any time and without notice.

Responsibility It is the responsibility of the user to ensure the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives.

Intellectual property Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual, copyright, designs, illustrations, drawings and the ‘know how’ contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law. *Non preferred articles All Item numbers in the catalogue marked with * are for non preferred items available on extended delivery times.

Trademarks Titus and Titusonic are registered trademarks of Titus International Ltd. Lama is a registered trademark of Titus d.o.o. Dekani, WoodWelding is a registered trademark of WW SA.

logo_tekform_last.pdf

1

10. 12. 15

07.50

3

Tekform Slimline Drawer

14 mm

Sleek look · 14mm side thickness · Efficient utilisation of drawer space

4

‘EasyFix’ front panel connector · Hand insertion · Quarter turn lock · Repeatable assembly and disassembly possible

Flexibility in use · Same panel cutting dimensions and drilling specification as 1st generation Tekform drawer

Tekform Slimline Drawer

Rear connector

Decorative cover Front connector

Drawer side Drawer runner

B ICW - 87 +/-0.5

L

A

bottom panel width tolerance +/- 1mm

Expanded tolerances

Titus damper inside

· Precise drawer alignment · Smooth and silent operating · Improved drawer stability in open position · +/-1mm tolerance on bottom panel width size

· Life-long consistent soft closing at various closing speeds · 'ConfidentClose' - fast closing, late start of damping, quiet landing · Low pull-out force

15.5 10.5 logo_tekform_last.pdf

32 min. min.

47.5 49

32

1

10. 12. 15

07.50

32 10+/-0.1

20

5

Tekform Slimline Drawer Product Guide

Page

Tekform Slimline Drawer Tekform Slimline drawer DW70

Tekform Slimline drawer DW100

14

16

Tekform Slimline drawer DW145

18

Tekform Slimline drawer DW182

20

Inner Slimline Drawer Fronts Inner drawer front for Tekform Slimline drawer DW70

22

Inner drawer front for Tekform Slimline drawer DW70 with glass

24

logo_tekform_last.pdf

6 6

1

10. 12. 15

07.50

Inner drawer front for Tekform Slimline Drawer DW145 with bar

26

Inner drawer front for Tekform Slimline drawer DW145 with low glass

28

Inner drawer front for Tekform Slimline drawerr DW145 with high glass

30

Inner drawer front for Tekform Slimline drawer DW182 with bar

32

Inner drawer front for Tekform Slimline drawer DW182 with low glass

34

Inner drawer front for Tekform Slimline drawer DW182 with high glass

36

logo_tekform_last.pdf

1

10. 12. 15

07.50

7

7

Tekform Slimline Drawer

Page

Tekform Slimline Drawer Information

Technical Guide How to choose the appropriate drawer dimension?

Select the drawer size based on available cabinet space. Please refer to the chart below with indicated minimum space

required in cabinet to choose appropriate drawer system.

Tekform drawer nominal length (NL) in mm NL

270

300

350

400

450

500

550

Min. height H required

Cabinet depth D

Tekform drawer with inner front Min. height H Cabinet required depth D

Tekform Slimline drawer DW70

115mm

NL + min 3mm

115mm

NL + min 12mm

Tekform Slimline drawer DW100

147mm

NL + min 3mm

/

/

Tekform Slimline drawer DW145

198mm

NL + min 3mm

198mm

NL + min 12mm

Tekform Slimline drawer DW182

230mm

NL + min 3mm

230mm

NL + min 12mm

Tekform drawer

H

37

D

How to fix drawer sides to the front panel?

The Tekform drawer is available with ‘EasyFix’ or screw-in front connectors Front connector

ø8 +/-0.1x11

'EasyFix' front connector

32

32

min.

48

min.

48

· hand insertion · quarter turn locking system · expandable plastic dowel · easy assembly and disassembly of front panel 9

90º

20 110

32 min. min. 49 33

Front connector

Screw-in front connector

· reliable connection · fixing with Ø 3.5x15mm screw (screws are not included) 32 min.

48

logo_tekform_last.pdf

1

10. 12. 15

07.50

15.5

8

5 3

Bottom panel and back panel cutting dimensions

Dimensions of bottom and back panel depends on:

1

· cabinet width · nominal drawer length · drawer height

2

Tekform drawer nominal length (NL) in mm NL

270

300

350

400

450

500

Decorative cover

Front connector

B Back panel

A Bottom panel

Cabinet width

550

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

Decorative cover Front connector ICW ECW

Back panel cutting dimensions

Back panel height depends on the B selected drawer height

A Bottom panel

Bottom panel cutting dimensions

B

Back panel

A Bottom panel

68

SDW100

100

SDW145

151

H

ICW - 87 +/-0.5

H back panel SDW70

A

L

A B

B SDW182 183 Back panel

70

L ICW - 87

+/-0.5

ICW - 87 +/-0.5

ICW+/-0.5 - 75 +/-0.5

ICW - 75

ICW ECW L

A

ICW - 75

ICW ECW

Tekform Slimline Drawer

4

+/-0.5

NL

270

300

350

400

450

500

550

L

260

290

340

390

440

490

540

NL= Tekform drawer nominal length (in mm)

logo_tekform_last.pdf

1

10. 12. 15

07.50

15.5

9

Tekform Slimline Drawer Information

Technical Guide How to choose the appropriate drawer runner fixing positions?

Drawer fixing positions depend on the chosen drawer front type.

Tekform Slimline drawer with standard front

When a standard drawer front is applied, use the third hole on the drawer runner for fixing.

Tekform Slimline drawer with inner front

When an inner drawer front is applied, use the second hole on the drawer runner for fixing.

front side

front side

Decorative cover 192

192

Load capacity

Drawer load capacity is 40 kg.

192

192

40kg

B Back panel

A Bottom panel

Expanded tolerances

Tekform drawers provide expanded tolerances in cabinet construction and assures: 路 precise drawer alignment 路 smooth and silent operating 路 Improved drawer stability in open position 路 Tekform drawer provides tolerance of +/-1mm on bottom panel width size ICW ECW

logo_tekform_last.pdf

10

1

10. 12. 15

07.50

B

192

ICW - 87 +/-0.5

224

L

A

224 ICW - 75

+/-0.5

bottom panel width tolerance +/- 1mm

Front connector

Tekform Slimline Drawer

Adjustment needs to be done on both sides of the drawer

Adjustments Side adjustment

Side adjustment is done through the adjustment screw on the drawer side.

+/- 1mm

Height adjustment

Release first the locking screw and tighten it back after the front is adjusted.

+/- 2mm

Release

Adjust

Tighten logo_tekform_last.pdf

1

10. 12. 15

07.50

11

Tekform Slimline Drawer Information

Key Design Choices 'ConfidentClose'

Fast closing

Late start of damping

Quiet landing

CAF Consumer Assembly Friendliness

‘EasyFix’ front panel connector with expandable plastic dowel provides: - Quick, tool-free insertion · Quarter turn lock · Repeatable assembly and disassembly

Front connector

90º

Titus hydraulic damper

Designed and produced in-house · Reliable and consistent life-long damping · Smooth closing · Dampers' consistency over high volume production runs assured · 100% automated quality check

Damping action

logo_tekform_last.pdf

12

1

10. 12. 15

07.50

Even and smooth soft closing action · Soft and reliable closing

Damping force

Stroke Flat damping curve shows the uniform action produced during damper closing at a defined speed.

Tekform Slimline Drawer logo_tekform_last.pdf

1

10. 12. 15

07.50

13

with Screw-in front connector

Item number for a set

Item number for a set

Antracite grey

270

655-8T27

>

655-8E27

>

150

185

300

655-8T30

>

655-8E30

>

150

185

350

655-8T35

>

655-8E35

>

150

185

400

655-8T40

>

655-8E40

>

150

185

450

655-8T45

>

655-8E45

>

150

185

500

655-8T50

>

655-8E50

>

150

185

550

655-8T55

>

655-8E55

>

150

185

Nominal length

with EasyFix front connector

White

Tekform Slimline Drawer DW70

(mm)

Rear connector

Decorative cover Front connector

Drawer side Drawer runner

Cutting dimensions details

One set consists of

B Back panel

A Bottom panel

ICW ECW

Drawer sides

2 pcs

Drawer runners

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer A B A

68

L ICW - 87 +/-0.5

B

68

L ICW - 87

+/-0.5

2 pcs Mounting instructions

ICW - 75 +/-0.5

L=NL-10 ICW - 75 +/-0.5

For further explanation > see page 9

4 sets Screws are not included

14

1 pc

· · · · ·

Drawer runner type Load capacity Minimum height space required Wooden back panel thickness Wooden bottom panel thickness

full extension 40 kg 115mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Tekform Slimline Drawer

For further explanation > see page 11

Installation dimensions

Drawer runner fixing positions

37

Minimum space required for the cabinet

min. 115

min. 115

37

Chipboard screw Ø3.5 x 15 Euroscrew Ø6.3 x 13

37

NL+3

NL+3

min. 115

NL+3

192 192

Drilling dimensions for the front panel NL+3

NL=270 mm

Screw-in attachment

EasyFix attachment

ø8 +/-0.1x11

32

32

min.

48

min.

48

ø8 +/-0.1x11

32

min.

48

32 ø8 +/-0.1x11

min.

48

32

ø8 +/-0.1x11

32

32

min.

NL=300 mm

min.

48

32

192 192

48

min.

48

min.

48

192 192

9

NL=350 mm

20dimensions for the back panel Mounting 110

32 9

9

min. min. 49 33

20 110

9

min. min. 49 33

192 192

20

32

110

32

NL=400 mm

min. min. 49 33

min. min. 49 33

192 192

NL=450 mm

Installation dimensions for the front panel 32

224 224

min.

48 32 15.5

NL=500 mm

min.

48

224 224 15.5

32

32

min.

48

min.

48

15.5

A trial mounting is always recommended.

For further information please contact your Titus Group representative.

NL=550 mm

15.5 logo_tekform_last.pdf

1

10. 12. 15

07.50

15

with Screw-in front connector

Item number for a set

Item number for a set

Antracite grey

270

655-8U27

>

655-8F27

>

150

185

300

655-8U30

>

655-8F30

>

150

185

350

655-8U35

>

655-8F35

>

150

185

400

655-8U40

>

655-8F40

>

150

185

450

655-8U45

>

655-8F45

>

150

185

500

655-8U50

>

655-8F50

>

150

185

550

655-8U55

>

655-8F55

>

150

185

Nominal length

with EasyFix front connector

White

Tekform Slimline Drawer DW100

(mm)

Decorative cover Rear connector

Front connector

Drawer side Drawer runner

Cutting dimensions details

B Back panel

A Bottom panel

One set consists of

Drawer sides

2 pcs

Drawer runners

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

ICW ECW

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

A B

A L

ICW - 87B+/-0.5

100 100

L ICW - 87 +/-0.5 ICW - 75 +/-0.5 ICW - 75 +/-0.5

L=NL-10

2 pcs Mounting instructions

For further explanation > see page 9

3 sets Screws are not included

16

1 pc

· · · · ·

Drawer runner type Load capacity Minimum height per drawer required Wooden back panel thickness Wooden bottom panel thickness

full extension 40 kg 147mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Tekform Slimline Drawer

For further explanation > see page 11

Installation dimensions

Drawer runner fixing positions

37

min. 147

Minimum space required for the cabinet

min. 147

37

Chipboard screw Ø3.5 x 15

37 37

Euroscrew Ø6.3 x 13

NL+3

min. 147 min. 147

NL+3

NL+3 192 192

NL+3

Drilling dimensions for the front panel

NL=270 mm

NL+3

EasyFix attachment ø8

Screw-in attachment

x11 32

32

min.

48

ø8 +/-0.1x11 32

min.

48

32 32 min. 32 48 min.

48

32

ø8 +/-0.1x11

32

min.

48

32

32

32

32

32

ø8 +/-0.1x11

ø8 +/-0.1x11

+/-0.1

min.

48

32 32

32

192 192

32

NL=300 mm 32

32 min.

48

min.

48

min. 32 48 min.

48

192 192

NL=350 mm

9 17 dimensions for the back panel Mounting 32

9

9

17 32 142 32 17 142

9

9 min. min. 49 33

32 32

142

192 192

32 min. min. 49 33 min. min. 49 33

142

min. min. 49 33

NL=400 mm

17 32

192 192

32 min. min. 49 33

NL=450 mm 224 224

Installation dimensions for the front panel

32

NL=500 mm

32 32

224 224

min.

48

32 32

32 15.5 min.

48 min.

48

32

NL=550 mm

15.5

32

15.5

32

32

A trial mounting is always recommended. min.

For further 48 information please contact your Titus Group representative.

15.5

min.

48

15.5

logo_tekform_last.pdf

1

10. 12. 15

07.50

17

with Screw-in front connector

Item number for a set

Item number for a set

Antracite grey

270

655-8V27

>

655-8G27

>

150

185

300

655-8V30

>

655-8G30

>

150

185

350

655-8V35

>

655-8G35

>

150

185

400

655-8V40

>

655-8G40

>

150

185

450

655-8V45

>

655-8G45

>

150

185

500

655-8V50

>

655-8G50

>

150

185

550

655-8V55

>

655-8G55

>

150

185

Nominal length

with EasyFix front connector

White

Tekform Slimline Drawer DW145

(mm)

Decorative cover Front connector

Rear connector

Drawer side

Drawer runner

One set consists of Cutting dimensions details

A Bottom panel

Drawer sides

2 pcs

Drawer runners

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

B Back panel

ICW ECW ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

A A

B

151

B

L L

ICW - 87

151

+/-0.5

ICW - 87 +/-0.5

2 pcs ICW - 75 +/-0.5 ICW - 75 +/-0.5

L=NL-10

Mounting instructions

For further explanation > see page 9

3 sets Screws are not included

18

1 pc

· · · · ·

Drawer runner type Load capacity Minimum height per drawer required Wooden back panel thickness Wooden bottom panel thickness

full extension 40 kg 198mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Tekform Slimline Drawer

For further explanation > see page 11

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 37

Chipboard screw Ø3.5 x 15

37

Euroscrew Ø6.3 x 13

min. 198

min. 198

37

37 37

NL+3

min. min.198 198

192 192

NL+3

NL+3dimensions for the front panel Drilling Screw-in attachment 32

32

NL+3 NL+3

64

64

ø8 +/-0.1x11

32

min.

48

64

64

32 32 64 64

32 min.

48

32 32 64 64

32

32 32

32 32

min.

48

min. min.

48 48

min. min.

48 48

9

32 NL=300 mm

32

min.

48

ø8 +/-0.1 x11 ø8 +/-0.1x11

192 192

ø8 +/-0.1x11

32

32

32

NL=270 mm

ø8 +/-0.1x11

EasyFix attachment

64

64

32

32

min.

48

min.

48

192 192

NL=350 mm

32

Mounting dimensions for the back panel

192 192

32

193

9 32 32

32 39

32

9 9

9

32

32 32

32

min. min.49 33

32 32 193 193 32 32

NL=400 mm

192 192

32 min.

49 min.min. min.

33 49 33

32

193

32 32

32 Installation dimensions for the front panel min. min.49 33

32

NL=450 mm 224 224

min. min.49 33

NL=500 mm 32 32 64 64 32 32

64

min.

48

min. min.

48 48 15.5

32

224 224

32

15.5 15.5

A trial mounting 64 is always recommended.

For further information please contact your Titus Group representative.

NL=550 mm 32

64

32

32

min.

min.

logo_tekform_last.pdf

1

10. 12. 15

07.50

19

with Screw-in front connector

Item number for a set

Item number for a set

Antracite grey

270

655-8Z27

>

655-8H27

>

150

185

300

655-8Z30

>

655-8H30

>

150

185

350

655-8Z35

>

655-8H35

>

150

185

400

655-8Z40

>

655-8H40

>

150

185

450

655-8Z45

>

655-8H45

>

150

185

500

655-8Z50

>

655-8H50

>

150

185

550

655-8Z55

>

655-8H55

>

150

185

Nominal length

with EasyFix front connector

White

Tekform Slimline Drawer DW182

(mm)

Decorative cover Front connector

Rear connector

Drawer side

Drawer runner

One set consists of

Cutting dimensions details

A Bottom panel

B Back panel

ICW ECW

Drawer sides

2 pcs

Drawer runners

2 pcs

*Front connectors

2 pcs

Rear connectors

2 pcs

Covers

2 pcs

ECW: External cabinet width ICW:Internal cabinet width NL: Nominal length of drawer

A A

B L

183

B

183

L ICW - 87 +/-0.5 ICW - 87 ICW - 75

L=NL-10

+/-0.5

ICW - 75 +/-0.5

2 pcs

+/-0.5

Mounting instructions

For further explanation > see page 9

3 sets logo_tekform_last.pdf

20

1

10. 12. 15

07.50

Screws are not included

1 pc

· · · · ·

Drawer runner type Load capacity Minimum height per drawer required Wooden back panel thickness Wooden bottom panel thickness

full extension 40kg 230mm 16mm 16mm

Side adjustment +1/-1mm

Height adjustment +2/-2mm

Tekform Slimline Drawer

For further explanation > see page 11

37

Installation dimensions

Drawer runner fixing positions

37

Minimum space required for the cabinet

min. 230

min. 230

37

min. 230

37 37

Chipboard screw Ø3.5 x 15

min. 230 min. 230

Euroscrew Ø6.3 x 13

NL+3

NL+3

NL+3 192 192

NL+3

Drilling dimensions for theNL+3 front panel EasyFix attachment ø8 +/-0.1x11

ø8 +/-0.1x11

32

64 32

64

64

64

32 64

32

32

32 min. min.

4848

32 min.

48

min.

48

64

64

min.

32 min.

4848 min.

48

32

min.

48

NL=300 mm

64 32 64 32

192 192

32

32

ø8 +/-0.1x1132

32

32

64

ø8 +/-0.1x11

ø8 +/-0.1x11

32

32

NL=270 mm Screw-in attachment

32

32

min.

48

min.

48

192 192

NL=350 mm

Mounting dimensions for the back panel 9

9

8

832 32 8

192 192

9

32

64

8 32 64

9 64

64

8 32

225 32

225 225 3232 32

NL=400 mm

192 192

32 32

min. min. 49 33 min. min.

49 min. min.

3349

33

32 32

9

64 225 32

Installation dimensions for the front panel

NL=450 mm 224 224

32 min. min. 49 NL=500 33

min. min. 49 33

mm

32

224 224

32 64

32 64

32

64

32 min.

48 min.

3248 15.5

NL=550 mm

min.

15.5 48

A trial mounting is always recommended.

15.5contact your For further information please 32 Titus Group representative.

64

logo_tekform_last.pdf

1

10. 12. 15

07.50

32

64

21

Inner Drawer Front for Tekform Slimline Drawer DW70 Front bracket Front panel

Cabinet side thickness=16mm

Cabinet side Front bracket thickness=18mm

Made of aluminium and plastic

10 pcs Front panel

110

Cutting dimension L = ICW-100

Antracite grey

400

655-8177

>

511

515

450

655-8178

>

511

515

500

655-8179

>

600

655-8180

>

800

655-8181

900

16

18

Item number

511

515

655-8020

>

511

515

>

655-8021

>

511

515

655-8182

>

655-8022

>

511

515

1000

655-8183

>

655-8023

>

511

515

1200

655-8184

>

655-8024

>

511

515

600

655-8185

>

655-8060

>

511

515

800

655-8186

>

655-8061

>

511

515

900

655-8187

>

655-8062

>

511

515

1000

655-8188

>

655-8063

>

511

515

1200

655-8189

>

655-8064

>

511

515

150

185

110

L

L

Item number

White

Inner drawer front, assembly set

External cabinet width

Front panel

ICW > see page 23

Made of aluminium

20 pcs

655-8065 >

Front bracket

Made of aluminium and plastic

40 sets logo_tekform_last.pdf

22

1

10. 12. 15

07.50

Bottom panel support 650-8908-350 white 650-8908-385 grey

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 11-12

Tekform Slimline Drawer

Front bracket Front panel

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 46

min. 115

Chipboard screw Ă˜3.5 x 15 Euroscrew Ă˜6.3 x 13 Use the second hole for runner fixing.

NL+12

Cutting dimensions details

NL=270 mm

46

10

min. 198

NL=300 mm

NL+12

NL=350 mm

46

min. 230

NL=400 mm

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=450 mm NL+12

NL=500 mm

NL=550 mm

logo_tekform_last.pdf

1

10. 12. 15

07.50

23

Inner Drawer Front for Tekform Slimline Drawer DW70 with Glass Front panel Front bracket Low glass panel Cabinet side

16

18

515

Transparent glass

511

Frosted glas

Front panel

400

655-8306

450

655-8307

>

511

515

500

655-8308

>

511

515

600

655-8285

>

655-8290

>

511

515

800

655-8286

>

655-8291

>

511

515

900

655-8287

>

655-8292

>

511

515

1000

655-8288

>

655-8293

>

511

515

1200

655-8289

>

655-8294

>

511

515

56 600

655-8205

>

655-8081

>

511

515

800

655-8206

>

655-8082

>

511

515

900

655-8207

>

655-8083

>

511

515

1000

655-8208

>

655-8084

>

511

515

1200

655-8209

>

655-8085

>

511

515

600

655-8295

>

655-8300

>

391

392

800

655-8296

>

655-8301

>

391

392

900

655-8297

>

655-8302

>

391

392

1000

655-8298

>

655-8303

>

391

392

1200

655-8299

>

655-8304

>

391

392

L

56 L

Cutting dimension L = ICW-100 ICW > see page 25

Front panel Item number

Item number

Front bracket

56

50

L

Made of aluminium

20 pcs

50

Low glass

50

10 pcs 20 pcs (655-8295, 655-8300, 655-8296, 655-8301)

Made of glass 655-8305 >

Front bracket

Made of aluminium and plastic

40 sets 1

Antracite grey

Front bracket

Low glass panel

Made of aluminium and glass

10 sets

24

Front panel

>Low glass panel

Inner drawer front, assembly set

logo_tekform_last.pdf

thickness=18mm

White

External cabinet width

Cabinet side thickness=16mm

10. 12. 15

07.50

Bottom panel support 650-8908-350 white 650-8908-385 grey

150

185

Side adjustment +1/-1mm Front panel

For further explanation > see page 11-12

Tekform Slimline Drawer

Front bracket Low glass panel

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 46

min. 115

Chipboard screw Ă˜3.5 x 15 Euroscrew Ă˜6.3 x 13 Use the second hole for runner fixing.

6

NL+12

Cutting dimensions details

NL=270 mm

46

min. 198

NL=300 mm

NL+12

NL=350 mm

46

NL=400 mm min. 230

0

Height adjustment +2/-2mm

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=450 mm NL+12

NL=500 mm

NL=550 mm

logo_tekform_last.pdf

1

10. 12. 15

07.50

25

Inner Drawer Front for Tekform Slimline Drawer DW145 with Bar

Front panel Cabinet side thickness=16mm Front bar

Front bracket Cabinet side thickness=18mm

Front bracket Front16bar

Antracite grey

18

White

External cabinet width

Front panel

400

655-8309

>

511

515

450

655-8310

>

511

515

500

655-8311

>

511

515

600

655-8190

>

655-8066

>

511

515

800

655-8191

>

655-8067

>

511

515

900

655-8192

>

655-8068

>

511

515

1000

655-8193

>

655-8069

>

511

515

1200

655-8194

>

655-8070

>

511

515

600

655-8210

>

655-8086

>

511

515

800

655-8211

>

655-8087

>

511

515

900

655-8212

>

655-8088

>

511

515

1000

655-8213

>

655-8089

>

511

515

1200

655-8214

>

655-8090

>

511

515

600

655-8185

>

655-8060

>

511

515

800

655-8186

>

655-8061

>

511

515

900

655-8187

>

655-8062

>

511

515

1000

655-8188

>

655-8063

>

511

515

1200

655-8189

>

655-8064

>

511

515

350

385

Front panel

Inner drawer front, assembly set

Made of aluminium and plastic

10 sets

20

L

Front bar

20 L

Cutting dimension L = ICW-88 ICW > see page 27 L L

Made of aluminium

20 pcs Front panel

110

Item number

Front bar

Front bracket Item number

20

110 L

110 L

Cutting dimension L = ICW-100 ICW > see page 27

Made of aluminium

20 pcs Front bracket

655-8101 >

Made of aluminium and plastic

20 sets logo_tekform_last.pdf

26

1

10. 12. 15

07.50

Bottom panel support 650-8908-350 white 650-8908-385 grey

Side adjustment +1/-1mm

Height adjustment +2/-2mm

For further explanation > see page 11-12

Tekform Slimline Drawer

Front panel Front bracket Front bar

min. 115

46

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 46

Chipboard screw Ă˜3.5 x 15 Euroscrew Ă˜6.3 x 13

min. 198

20

Use the second hole for runner fixing.

NL+12

NL=270 mm 110

Cutting dimensions details 46

min. 230

NL=300 mm

NL=350 mm NL+12

NL=400 mm

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=450 mm

NL=500 mm

NL=550 mm

logo_tekform_last.pdf

1

10. 12. 15

07.50

27

Inner Drawer Front for Tekform Slimline Drawer DW145 with Low Glass

Front panel Front bracket

Cabinet side Cabinet side Low glass panel thickness=16mm thickness=18mm

Front bracket Low glass panel Frosted glass

Transparent glass

18

Antracite grey

16

White

External cabinet width

Front panel

600

655-8195

>

655-8071

>

511

515

800

655-8196

>

655-8072

>

511

515

900

655-8197

>

655-8073

>

511

515

1000

655-8198

>

655-8074

>

511

515

1200

655-8199

>

655-8075

>

511

515

600

655-8205

>

655-8081

>

511

515

800

655-8206

>

655-8082

>

511

515

900

655-8207

>

655-8083

>

511

515

1000

655-8208

>

655-8084

>

511

515

1200

655-8209

>

655-8085

>

511

515

600

655-8215

>

655-8091

>

391

392

800

655-8216

>

655-8092

>

391

392

900

655-8217

>

655-8093

>

391

392

1000

655-8218

>

655-8094

>

391

392

1200

655-8219

>

655-8095

>

391

392

Front panel

Inner drawer front, assembly set

Made of aluminium and glass

10 sets

56

L

Front panel

56 L

Cutting dimension L = ICW-100 ICW > see page 29

Front bracket Item number Item number Low glass panel

70 56

L

Made of aluminium

20 pcs

70

Front glass panel - low

70

10 pcs 20 pcs (655-8215, 655-8091, 655-8216, 655-8092)

Made of glass

Front bracket

655-8102 >

Made of aluminium and plastic

20 sets logo_tekform_last.pdf

28

1

10. 12. 15

07.50

Bottom panel support 650-8908-350 white 650-8908-385 grey

350

385

Side adjustment +1/-1mm Front panel

Height adjustment +2/-2mm

For further explanation > see page 11-12

Tekform Slimline Drawer

Front bracket Low glass panel

min. 115

46

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 46

Chipboard screw Ă˜3.5 x 15 56

min. 198

Euroscrew Ă˜6.3 x 13 Use the second hole for runner fixing.

NL+12

NL=270 mm

70

Cutting dimensions details 46

min. 230

NL=300 mm

NL=350 mm NL+12

NL=400 mm

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=450 mm

NL=500 mm

NL=550 mm

logo_tekform_last.pdf

1

10. 12. 15

07.50

29

Inner Drawer Front for Tekform Slimline Drawer DW145 with High Glass

Front panel Front bracket

Cabinet side Cabinet side thickness=16mm High glassthickness=18mm panel

External cabinet width

Item number

number High glassItem panel

White

Antracite grey

Front panel

400

655-8312

>

511

515

450

655-8313

>

511

515

500

655-8314

>

600

655-8200

>

800

655-8201

900

Front bracket 16 glass panel High

Frosted glass

Transparent glass

18

511

515

655-8076

>

511

515

>

655-8077

>

511

515

655-8202

>

655-8078

>

511

515

1000

655-8203

>

655-8079

>

511

515

1200

655-8204

>

655-8080

>

511

515

600

655-8205

>

655-8081

>

511

515

800

655-8206

>

655-8082

>

511

515

900

655-8207

>

655-8083

>

511

515

1000

655-8208

>

655-8084

>

511

515

1200

655-8209

>

655-8085

>

511

515

600

655-8220

>

655-8096

>

391

392

800

655-8221

>

655-8097

>

391

392

900

655-8222

>

655-8098

>

391

392

1000

655-8223

>

655-8099

>

391

392

1200

655-8224

>

655-8100

>

391

392

Front panel

Inner drawer front, assembly set

Made of aluminium and glass

10 sets

56

L

Front panel

56 L

Cutting dimension L = ICW-100 ICW > see page 31

Front bracket

137 56

L

Made of aluminium

20 pcs

137

Front glass panel - high

137

10 pcs 20 pcs (655-8220, 655-8096, 655-8221, 655-8097)

Made of glass

Front bracket

655-8103 >

Made of aluminium and plastic

20 sets logo_tekform_last.pdf

30

1

10. 12. 15

07.50

Bottom panel support 650-8908-350 white 650-8908-385 grey

350

385

Side adjustment +1/-1mm Front panel

Height adjustment +2/-2mm

For further explanation > see page 11-12

Tekform Slimline Drawer

Front bracket High glass panel

min. 115

46

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 46

Chipboard screw Ă˜3.5 x 15 56

min. 198

Euroscrew Ă˜6.3 x 13 Use the second hole for runner fixing.

NL+12

NL=270 mm

137

Cutting dimensions details 46

min. 230

NL=300 mm

NL=350 mm NL+12

NL=400 mm

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=450 mm

NL=500 mm

NL=550 mm

logo_tekform_last.pdf

1

10. 12. 15

07.50

31

Inner Drawer Front for Tekform Slimline Drawer DW182 with Bar

Front panel

Inner drawer front, assembly set

Made of aluminium and plastic

10 sets

20

L

Front bar

20 L

Cutting dimension L = ICW-88

110

Front panel

Front panel

Item number

18 Front

Front bar

Item number

400

655-8315

>

450

655-8316

500

bracket Antracite grey

16

White

External cabinet width

Cabinet side Cabinet side Front bracket thickness=16mm Frontthickness=18mm bar

Front bracket

511

515

>

511

515

655-8317

>

511

515

600

655-8260

>

655-8110

>

511

515

800

655-8261

>

655-8111

>

511

515

900

655-8262

>

655-8112

>

511

515

1000

655-8263

>

655-8113

>

511

515

1200

655-8264

>

655-8114

>

511

515

600

655-8210

>

655-8086

>

511

515

800

655-8211

>

655-8087

>

511

515

900

655-8212

>

655-8088

>

511

515

1000

655-8213

>

655-8089

>

511

515

1200

655-8214

>

655-8090

>

511

515

600

655-8185

>

655-8060

>

511

515

800

655-8186

>

655-8061

>

511

515

900

655-8187

>

655-8062

>

511

515

1000

655-8188

>

655-8063

>

511

515

1200

655-8189

>

655-8064

>

511

515

350

385

ICW > see page 33

Front bar

L

20 L 110

Made of aluminium

20 pcs

L

Front panel

110 L

Cutting dimension L = ICW-100 ICW > see page 33

Made of aluminium

20 pcs Front bracket

655-8170 >

Made of aluminium and plastic

20 sets logo_tekform_last.pdf

32

1

10. 12. 15

07.50

Bottom panel support 650-8908-350 white 650-8908-385 grey

min. 115

46

Side adjustment +1/-1mm NL+12

For further explanation > see page 11-12

Tekform Slimline Drawer

Front panel

Height adjustment +2/-2mm

Front bracket

Front bar

min. 198

46

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 46

Chipboard screw Ă˜3.5 x 15 20

min. 230

Euroscrew Ă˜6.3 x 13 Use the second hole for runner fixing.

NL+12

110

NL=270 mm

Cutting dimensions details

NL=300 mm

NL=350 mm

NL=400 mm

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=450 mm

NL=500 mm

NL=550 mm

logo_tekform_last.pdf

1

10. 12. 15

07.50

33

Inner Drawer Front for Tekform Slimline Drawer DW182 with Low Glass

Front panel

Cabinet side thickness=16mm

Cabinet side thickness=18mm Front bracket

Low glass panel Front bracket Antracite grey

Frosted glas

Transparent glass

Low glass panel

White

External cabinet width

Front panel

400

Low> glass panel 655-8318

511

515

450

655-8319

>

511

515

500

655-8320

>

511

515

600

655-8265

>

655-8115

>

511

515

800

655-8266

>

655-8116

>

511

515

900

655-8267

>

655-8117

>

511

515

1000

655-8268

>

655-8118

>

511

515

1200

655-8269

>

655-8119

>

511

515

600

655-8205

>

655-8081

>

511

515

800

655-8206

>

655-8082

>

511

515

900

655-8207

>

655-8083

>

511

515

1000

655-8208

>

655-8084

>

511

515

1200

655-8209

>

655-8085

>

511

515

600

655-8275

>

655-8160

>

391

392

800

655-8276

>

655-8161

>

391

392

900

655-8277

>

655-8162

>

391

392

1000

655-8278

>

655-8163

>

391

392

1200

655-8279

>

655-8164

>

391

392

16

18

Front panel Inner drawer front, assembly set

Made of aluminium and glass

10 sets

56

Front panel

L

56 L

Cutting dimension L = ICW-100 ICW > see page 35

Item number

Item number

Front bracket

102 56 L

Made of aluminium

20 pcs

102

Front glass panel - low

102

10 pcs 20 pcs (655-8275, 655-8160, 655-8276, 655-8161)

Made of glass

Front bracket

655-8171 >

Made of aluminium and plastic

20 sets logo_tekform_last.pdf

34

1

10. 12. 15

07.50

Bottom panel support 650-8908-350 white 650-8908-385 grey

350

385

min. 115

46

Side adjustment +1/-1mm NL+12

Height adjustment +2/-2mm

For further explanation > see page 11-12

Tekform Slimline Drawer

Front panel Front bracket Low glass panel

min. 198

46

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 46

Chipboard screw Ă˜3.5 x 15 Euroscrew Ă˜6.3 x 13

min. 230

56

Use the second hole for runner fixing.

NL+12

NL=270 mm

102

Cutting dimensions details

NL=300 mm

NL=350 mm

NL=400 mm

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=450 mm

NL=500 mm

NL=550 mm

logo_tekform_last.pdf

1

10. 12. 15

07.50

35

Inner Drawer Front for Tekform Slimline Drawer DW182 with High Glass

Front panel Cabinet side thickness=18mm Front bracket

Cabinet side thickness=16mm

High glass panel

Front bracket

L

Front panel

56 L

Cutting dimension L = ICW-100 ICW > see page 37

511

515

Transparent glass

Made of aluminium and glass

10 sets

56

515

511

515

655-8120

>

511

515

>

655-8121

>

511

515

655-8272

>

655-8122

>

511

515

1000

655-8273

>

655-8123

>

511

515

1200

655-8274

>

655-8124

>

511

515

600

655-8205

>

655-8081

>

511

515

800

655-8206

>

655-8082

>

511

515

900

655-8207

>

655-8083

>

511

515

1000

655-8208

>

655-8084

>

511

515

1200

655-8209

>

655-8085

>

511

515

600

655-8280

>

655-8165

>

391

392

800

655-8281

>

655-8166

>

391

392

900

655-8282

>

655-8167

>

391

392

1000

655-8283

>

655-8168

>

391

392

1200

655-8284

>

655-8169

>

391

392

Front panel

Inner drawer front, assembly set

511

18

Frosted glas

16

Antracite grey

High glass panel

White

External cabinet width

Front panel

Item number

Item number

High glass panel

400

655-8321

>

450

655-8322

>

500

655-8323

>

600

655-8270

>

800

655-8271

900

Front bracket

170 56

L

Made of aluminium

20 pcs

170

Front glass panel - high

170

5 pcs 10 pcs (655-8280, 655-8165, 655-8281, 655-8166)

Made of glass

Front bracket

655-8172 >

Made of aluminium and plastic

20 sets logo_tekform_last.pdf

36

1

10. 12. 15

07.50

Bottom panel support 650-8908-350 white 650-8908-385 grey

350

385

min. 115

46

Side adjustment +1/-1mm NL+12

For further explanation > see page 11-12

Tekform Slimline Drawer

Front panel

Height adjustment +2/-2mm

Front bracket

High glass panel

min. 198

46

NL+12

Installation dimensions

Drawer runner fixing positions

Minimum space required for the cabinet 46

Chipboard screw Ă˜3.5 x 15

56

min. 230

Euroscrew Ă˜6.3 x 13 Use the second hole for runner fixing.

NL+12 170

NL=270 mm

Cutting dimensions details

NL=300 mm

NL=350 mm

NL=400 mm

ECW: External cabinet width ICW: Internal cabinet width NL: Nominal length of drawer

NL=450 mm

NL=500 mm

NL=550 mm

logo_tekform_last.pdf

1

10. 12. 15

07.50

37

Black

Accessories

Item number

Marking jig for Tekform Slimline drawer DW70

1 set

1

1 set

390

655-8017

>

390

655-8018

>

390

2

1

2

Made of plastic and steel

Marking jig for Tekform Slimline drawer DW145 and DW182

1

1 set

38

>

Made of plastic and steel

Marking jig for Tekform Slimline drawer DW100

logo_tekform_last.pdf

655-8016

Made of plastic and steel 1

10. 12. 15

07.50

2

Assembly Instructions

Tekform Slimline Drawer

Screws are not included

Assembly Sequence Connect the drawer sides to the bottom panel (1) and fix it with screws (2)

1

2

Chipboard screw Ă˜3.5 x 15

192 192

192

Insert the rear connector vertically (3) and push it downwards into recess in the drawer side (4)

192

3

4

192 192

192 192

192 192

224

Insert the back panel (5) and fix it with screws (6)

224

5

6

224 224

Chipboard screw Ă˜3.5 x 15 logo_tekform_last.pdf

1

10. 12. 15

07.50

39

Assembly Instructions

Screws are not included

Insertion of Front Connectors EasyFix Insert the front connectors into holes on the front panel Front connector

Front panel

Turn the screws 90º into locked position

90º turn

90º

Screw-in fixing Use Ø3 x 15mm screws for fixing

Front connector

Chipboard screw Ø3.5 x 15

Front panel

192

192

192

40

192

Tekform Slimline Drawer

Front Panel Mounting / Removal Mounting Attach the front panel to the drawer and press to click

Removal Turn the screw towards the front panel

logo_tekform_last.pdf

1

10. 12. 15

07.50

41

Assembly Instructions

Drawer Insertion / Removal Insertion Place the drawer horizontally on the runners and push towards the cabinet until you hear the drawer is locked

Push to fully close

Removal Press-up the button under the drawer.

Keep pressed to pull the drawer out

Press-up

42

Tekform Slimline Drawer

Accessories Mounting

Assembly of Inner Drawer Front Slimline DW70

Slimline DW145 and DW182 with bar

Slimline DW70, DW145 and DW182 with glass

logo_tekform_last.pdf

1

10. 12. 15

07.50

43

logo_tekform_last.pdf

44

1

10. 12. 15

07.50

logo_tekform_last.pdf

1

10. 12. 15

07.50

45

Tekform Slimline Drawer

The Titus Group Profile

Titus Group

Titus focuses on the design, manufacture and distribution of connectors, concealed hinges drawers and soft closing mechanisms in furniture and household appliances.

1973 Titus established

2005 Titusonic ultrasound fastening technology

2017 Launch of T-type full hinge programme

46

Titus Group is owned and managed from its headquarters in United Kingdom. We are able to provide products and services to every customer around the world based on manufacturing facilities in Europe, North America, China, SE Asia, Australia and New Zealand.

1975 Revolution in particleboard panel processing productivity

2006 Merger with Lama d.d.

Launch of Glissando

1977 Titus launches concealed cabinet connector

2007 Titus becomes Titus+ Specialist in precision components’ engineering

Quickfit technology makes Titus the World leader in connectors for RTA furniture

1980 Titus USA office and manufacturing established

2009 Damper’s development and engineering

1990 Inovative Quickfit technology launched

2014 Acqusition of Tekform, Australia

Vision

Mission

The world’s best engineering for precision components

To provide manufacturers with components’ solutions that improve competitiveness

Titus Business Philosophies and Principles · Gain total knowledge of our customers and their markets · Focus on identifying and creating high volume component niches · Meet our customers’ expectations with global consistency · Build long term associations with customers, suppliers, colleagues and shareholders · Invest in the abilites of individuals at every level · Continuously enhance input efficiency and sustainability

mp on

Connectors

Drawers

Pr

ec

Assembly systems

ies

Dampers

log

Co

Tooling

no

isi

ch

Te

on

en

ts

Die casting

Damped components

Damped hinges

Titusonic FastFit

Furniture Hardware

Furniture Hardware

Components

Technologies

· Cabinet connectors · Concealed hinges · Soft closing systems · Drawers and drawer systems · Kitchen accessories · Furniture locks · Decorative

· Dampers · Precision components

· Automation systems · Precision castings · Die cast technologies · Tooling · Ultrasound fastening technology · FastFit technology

47 47

‘Totally Integrated Engineering’

Product Design Design and engineering of unique components Consistent and repeatable product quality

Manufacturing Technologies

Manufacturing Operations

to improve productivity and product quality

A wide array of technologies and services required for high volume production of precision components available in-house

ies

log

no

Pr

ch

od

Te

uc

ing

tD

es

tur

ign

fac

nu Ma

Precision Components

Die casting

Forging

Combi casting

Conventional casting

Stamping

Moulding

Surface treatment

Heat treatment

Assembly

Packing

Manufacturing Operations

Fittings for purpose Unique product advantages for better value for money and lower ‘total installed cost’

48

Innovations that improve with less parts, less different parts, less preparation actions, faster assembly

Fast time-to-market

Quality

Continuous Improvement The Titus Group Mission, to improve the competitiveness of our customers, encourages us to continuously improve our products, services, processes and competencies of our employees.

Quality

Products

We believe that the Titus Mission is achieved most effectively through the management of our design, manufacturing and service activities in conformance with the ISO 9001 standard for quality management.

Quality has a broad meaning for us: it is our guide to the selection of materials, work, processes, internal relations and cooperation with partners.

Our integrated quality system produces technically optimized products of high quality. They are assessed regularly in our own test labs as well as by internationally renowned institutions, such as LGA from Germany, CTBA from France, FIRA from United Kingdom, CATAS from Italy, AIDIMA from Spain, and others.

49

Global player Worldwide design, manufacturing and distribution capabilities Titus GmbH, Herford

Europe TitusPlus d.o.o.

Dekani 5 SI-6271 Dekani Slovenia +386 566 90 213 +386 566 90 205 Fax info@titusplus.com

CRO LAMA d.o.o.

Rakitska 10a Rakitje HR-10437 Bestovje Croatia +385 1 3323 033 +385 1 3323 233 Fax croatia@titusplus.com

Titus d.o.o. Dekani Dekani 5 SI-6271 Dekani Slovenia +386 566 90 213 +386 566 90 205 Fax info@titusplus.com

Titus Polska Sp. z o.o. ul. Stefańskiego 17 A PL-62-002 Suchy Las/Poznań Poland +4861 811 5402 Phone/Fax +4861 811 5684 Phone/Fax +4861 821 9362 poland@titusplus.com

Titus Technologies Lama Avtomatizacija d.o.o.

Dekani 5 SI-6271 Dekani Slovenia +386 566 90 146 technologies@titusplus.com

TitusPlus Italia S.r.l.

Via Aquileia 9 Frazione Olmi 31048 San Biagio di Callalta (TV) +39 04 221 650 120 +39 04 221 650 136 Fax italia@titusplus.com

Titus Tool Company Ltd. 10 Blackburn Industrial Estate Enterprise Way Sherburn in Elmet LS256NA United Kingdom +44 1977682 582 +44 1977680 481 Fax uk@titusplus.com

TitusPlus Iberia S.L.U. C/ Gran Bretanya 34 08520 Les Franqueses del Valles (Barcelona) +34 938 715 404 +34 938 605 498 Fax iberia@titusplus.com Titus GmbH, Herford Lübberlindenweg 12 D-32049 Herford Germany + 49 5221 102488-0 germany@titusplus.com

America

Asia

Titus Tool Co. Inc. 2800 156th Avenue SE Suite 135 Bellevue, WA 98007, USA 800 762 1616 toll free +1 425 746 2080 +1 425 746 2344 Fax

Titus Tool Co. Pte. Ltd. 5004 Ang Mo Kio Ave 5 Techplace II #04-01 Singapore 569872 +656383 3922 +656383 3178 Fax singapore@titusplus.com

Titus Tool Co. Inc. 11056 W. Addison Street Franklin Park, IL 60131, USA +1 253 872 2829 +1 253 872 2827 Fax usa@titusplus.com

Titus Shenzhen Components Co. Ltd 1st Floor, Building No. 2 Heng Changrong High-tech Industrial Park Shangnan South Road Shangjin Street Baoan District Shenzhen Province China +86 755 8348 0916 +86 8359 2676 Fax china@titusplus.com

Australia Titus Tekform Pty Ltd Unit 1, 41-43 Whyalla Place Prestons NSW 2170 Australia +61 2 9286 0007 +61 2 9826 0074 Fax www.titustekform.com.au info@titustekform.com.au Stefano Orlati Ltd 34 Waipareira Avenue Henderson Auckland, New Zealand +64 9 837 0886 +64 9 837 8003Fax www.titustekform.com.au info@titustekform.com.au

Titus Tekform Indonesia, PT Taman Tekno Blok L2 / 7 BSD Sektor XI - Tangerang 15314 Indonesia T. +62 21 75873578 F. +62 21 75873574 indonesia@titusplus.com Headquarters Titus International Ltd 325 Euston Road London NW1 3AD, United Kingdom info@titusplus.com www.titusplus.com info@titusplus.com

Index

Item number

Page

Item number

Page

Item number

Page

Item number

Page

655-8016 655-8017 655-8018 655-8020 655-8021 655-8022 655-8023 655-8024 655-8025 655-8026 655-8027 655-8028 655-8029 655-8060 655-8061 655-8062 655-8063 655-8064 655-8065 655-8066 655-8067 655-8068 655-8069 655-8070 655-8071 655-8072 655-8073 655-8074 655-8075 655-8076 655-8077 655-8078 655-8079 655-8080 655-8081

38 38 38 22 22 22 22 22 30 30 30 30 30 22, 26, 32 22, 26, 32 22, 26, 32 22, 26, 32 22, 26, 32 22 26 26 26 26 26 28 28 28 28 28 30 30 30 30 30 24, 28, 30, 34, 36 24, 28, 30, 34, 36 24, 28, 30, 34, 36 24, 28, 30, 34, 36 24, 28, 30, 34, 36 26, 30 26, 30 26, 30 26, 30 26, 30 28 28 28 28 28 30 30 30 30 30 26 28 30 32 32 32 32 32

655-8115 655-8116 655-8117 655-8118 655-8119 655-8120 655-8121 655-8122 655-8123 655-8124 655-8160 655-8161 655-8162 655-8163 655-8164 655-8165 655-8166 655-8167 655-8168 655-8169 655-8170 655-8171 655-8172 655-8177 655-8178 655-8179 655-8180 655-8181 655-8182 655-8183 655-8184 655-8185 655-8186 655-8187 655-8188 655-8189 655-8190 655-8191 655-8192 655-8193 655-8194 655-8195 655-8196 655-8197 655-8198 655-8199 655-8200 655-8201 655-8202 655-8203 655-8204 655-8205

34 34 34 34 34 36 36 36 36 36 34 34 34 34 34 36 36 36 36 36 32 34 36 22 22 22 22 22 22 22 22 22, 26, 32 22, 26, 32 22, 26, 32 22, 26, 32 22, 26, 32 26 26 26 26 26 28 28 28 28 28 30 30 30 30 30 24, 28, 30, 34, 36 24, 28, 30, 34, 36 24, 28, 30, 34, 36 24, 28, 30, 34, 36 24, 28, 30, 34, 36 26, 32 26, 32 26, 32 26, 32 26, 32 28

655-8216 655-8217 655-8218 655-8219 655-8220 655-8221 655-8222 655-8223 655-8224 655-8260 655-8261 655-8262 655-8263 655-8264 655-8265 655-8266 655-8267 655-8268 655-8269 655-8270 655-8271 655-8272 655-8273 655-8274 655-8275 655-8276 655-8277 655-8278 655-8279 655-8280 655-8281 655-8282 655-8283 655-8284 655-8285 655-8286 655-8287 655-8288 655-8289 655-8290 655-8291 655-8292 655-8293 655-8294 655-8295 655-8296 655-8297 655-8298 655-8299 655-8300 655-8301 655-8302 655-8303 655-8304 655-8305 655-8306 655-8307 655-8308 655-8309 655-8310 655-8311 655-8312 655-8313 655-8314 655-8315 655-8316 655-8317

28 28 28 28 30 30 30 30 30 32 32 32 32 32 34 34 34 34 34 36 36 36 36 36 34 34 34 34 34 36 36 36 36 36 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 26 26 26 30 30 30 32 32 32

655-8318 655-8319 655-8320 655-8321 655-8322 655-8323 655-8E27 655-8E30 655-8E35 655-8E40 655-8E45 655-8E50 655-8E55 655-8F27 655-8F30 655-8F35 655-8F40 655-8F45 655-8F50 655-8F55 655-8G27 655-8G30 655-8G35 655-8G40 655-8G45 655-8G50 655-8G55 655-8H27 655-8H30 655-8H35 655-8H40 655-8H45 655-8H50 655-8H55 655-8T27 655-8T30 655-8T35 655-8T40 655-8T45 655-8T50 655-8T55 655-8U27 655-8U30 655-8U35 655-8U40 655-8U45 655-8U50 655-8U55 655-8V27 655-8V30 655-8V35 655-8V40 655-8V45 655-8V50 655-8V55 655-8Z27 655-8Z30 655-8Z35 655-8Z40 655-8Z45 655-8Z50 655-8Z55

34 34 34 36 36 36 14 14 14 14 14 14 14 16 16 16 16 16 16 16 18 18 18 18 18 18 18 20 20 20 20 20 20 20 14 14 14 14 14 14 14 16 16 16 16 16 16 16 18 18 18 18 18 18 18 20 20 20 20 20 20 20

655-8082 655-8083 655-8084 655-8085 655-8086 655-8087 655-8088 655-8089 655-8090 655-8091 655-8092 655-8093 655-8094 655-8095 655-8096 655-8097 655-8098 655-8099 655-8100 655-8101 655-8102 655-8103 655-8110 655-8111 655-8112 655-8113 655-8114

655-8206 655-8207 655-8208 655-8209 655-8210 655-8211 655-8212 655-8213 655-8214 655-8215

51

Your authorized dealer Titus Group www.titusplus.com TekformDrawerSlimline 03.1 Eng Jan19