Issuu

THE TROTTIER INSTITUTE FOR SUSTAINABILITY IN ENGINEERING AND DESIGN

Annual Report May 1, 2016 to April 30, 2017

CONTENTS MESSAGE FROM TISED’S DIRECTOR ___________________________________________________________________ 1 MISSION & GOALS __________________________________________________________________________________ 2 GOVERNANCE ______________________________________________________________________________________ 3 STAFF______________________________________________________________________________________________ 3 MEMBERSHIP ______________________________________________________________________________________ 5 PARTNERSHIPS _____________________________________________________________________________________ 7 RESEARCH _________________________________________________________________________________________ 8 Faculty Scholar Awards ...........................................................................................................................................................8 Scholars-in-Residence & Visiting Professors........................................................................................................................9 Endowed Chair in Sustainable Engineering & Design ..................................................................................................... 13 Research Workshop Program.............................................................................................................................................. 13 Policy Highlight: Is There a Role for Microgrids in Quebec? .......................................................................................... 14 Policy Highlight: Open Forum with Senate of Canada Committee ............................................................................... 16 OUTREACH________________________________________________________________________________________ 17 TISED hosted & co -hosted events....................................................................................................................................... 17 Event Highlight: Green roofs for stormwater retention and flowrate attenuation ................................................... 19 Event Highlight: Fourth Annual Trottier Symposium on Sustainable Engineering, Energy and Design ................. 18 STUDENT SUPPORT ________________________________________________________________________________ 20 TISED Matching Funds Program.......................................................................................................................................... 20 TISED Summer Undergraduate Research in Engineering (SURE) awards .................................................................... 21 EDUCATION AND TRAINING _________________________________________________________________________ 23 TISED Course on "Energy Analysis" .................................................................................................................................... 23 TISED Course on "Sustainable Urban Communities" ...................................................................................................... 24 Education Highlight: SEDTALKS! .......................................................................................................................................... 26 EducationHhighlight: Sustainable Innovation Case Competition Promotes Cross-Faculty Collaboration............. 27 FINANCIAL REVIEW ________________________________________________________________________________ 29 A LOOK AHEAD ____________________________________________________________________________________ 31 APPENDIX A: TISED MEMBERS _______________________________________________________________________ 33 APPENDIX B: TISED MEMBERS’ FUNDED RESEARCH PROJECTS ___________________________________________ 35 APPENDIX C: TISED MEMBERS’ PUBLICATIONS _________________________________________________________ 66

MESSAGE FROM TISED’S DIRECTOR Welcome to our 2016-2017 Annual Report outlining the TISED community’s efforts this past year towards advancing sustainability through engineering and design. Talented individuals from the TISED membership as well as our partners have been instrumental in our progress on many initiatives on research, education, policy, and outreach. Our 54 TISED members include distinguished scholars who work in interdisciplinary teams on technological and policy dimensions of critical sustainability issues. We are grateful to be actively engaged with engineering, architecture, and urban planning students in activities related to sustainability research and learning. We are building solid partnerships with other institutes, organizations, and companies year over year. Over the past year, TISED expanded its Research Workshop Program, bringing together experts from academia, industry, and government to advance cutting-edge and emerging technological and policy solutions implementing sustainability. We ran a highly successful workshop, The Role of Microgrids in Quebec and Canada’s Future, in April 2017. TISED’s research and organizational capacity was significantly enhanced by the launch of our Scholarin-Residence program as we brought on two distinguished scholars in this fiscal period: Dr. Chris Marnay, retired staff scientist at the Lawrence Berkeley National Laboratory; and Professor Stefan Grimberg, Clarkson University. Professor Jeffrey Bergthorson, TISED’s Panda Faculty Scholar in Sustainability in Engineering and Design, undertook his third and final year of research excellence using this award. As part of TISED’s mission to advance student engagement and education, we offered two for-credit courses (Energy Analysis and Sustainable Urban Communities) and jointly hosted our fourth annual Sustainable Innovation Green Chemistry case competition. TISED and Institut de l’énergie Trottier (IET) co-hosted the fourth annual Symposium on Sustainable Engineering, Energy and Design on Transportation: What’s fuelling the future? this past Spring. These are but a few of the highlights so please enjoy more details in this report about our achievements and progress over the past year! We look forward to a successful 2017-2018 with you.

Subhasis Ghoshal, Professor and Director, Trottier Institute for Sustainability in Engineering and Design

MISSION & GOALS TISED’S MISSION Our mission at the Trottier Institute for Sustainability in Engineering and Design (TISED) is to produce innovative engineering and design solutions and intellectual capacity that enables us to protect and nurture Earth and its inhabitants to meet the needs of current and future generations.

TISED’S GOALS    

Create and participate in forums for sustainability through inspired critical thinking and action by engaging the university community, decision-makers, and the public Catalyze interdisciplinary and inter-institutional research that provides solutions to local and global sustainability challenges Inform and advance public policy with governments, industry and other organizations, particularly as relating to engineered and designed systems Educate current and future generations of engineers, urban planners and architects to be leaders in sustainability in their professions

GOVERNANCE Over this past year, TISED has created ad hoc committees and working groups established for project and event-specific initiatives to gradually evaluate our own needs for more permanent frameworks for governance. Weâ€™ve benefited from continual input from the Dean of Engineering, our benefactors, and our professoriate across the University on various initiatives and programming. In the year ahead, TISED will be establishing a permanent governance structure including both an Advisory Board and Board of Directors with respective roles to guide the strategic direction of TISED and approve the operations of the institute. We will include representation from key internal and external stakeholders groups, dependent on the formalized terms of reference that represent our vision for each governing group we are in the process of designing.

STAFF SUBHASIS GHOSHAL, DIRECTOR Subhasis Ghoshal is a Professor in Civil Engineering and is a respected authority on water quality, nano- and biotechnologies for soil and groundwater remediation, and on the sustainable use of nanomaterials . Professor Ghoshal joined McGill University after completing his Ph.D. at Carnegie Mellon University and postdoctoral fellowship at the University of Michigan. He served as McGill's Associate Dean for Undergraduate Education in the Faculty of Engineering from 2006 to 2012. Professor Ghoshal has been the Director of TISED since 2013.

JEFFREY BERGTHORSON, ASSOCIATE DIRECTOR Jeffrey Bergthorson is an Associate Professor in Mechanical Engineering at McGill University, where he leads the Alternative Fuels Laboratory. As the Panda Faculty Scholar in Sustainability in Engineering and a William Dawson Scholar, he leads a team conducting research on the combustion and emissions properties of alternative and sustainable fuels and the impact of these properties on their performance in current and future engine technologies. Professor Bergthorson became the Associate Director of TISED in 2016.

LAUREN PENNEY, MANAGER Lauren holds a Masterâ€™s degree in Environmental Public Policy and Public Administration and, for over ten years, she has worked for various community groups, government agencies, and universities. Lauren has been TISEDâ€™s Manager since 2013, coupling her experience in program design and stakeholder consultation with applied strategic communications, marketing, and project management.

IRENE TOFFOLO, ADMINISTRATIVE COORDINATOR Irene is an administrative professional with more than 15 years of experience in general administration, including coordination, logistics, customer services, public relations and finance. Irene holds a BA in Sociology from Concordia University, Certificate in Public Relations Management from McGill University and is presently studying to receive her Certified Associate in Project Management designation (CAPM).

MEMBERSHIP

Our membership base has grown and includes 54 tenure or tenure-track faculty members from the Faculty of Engineering at McGill University. See Appendix A: TISED Members. These members span across all departments and schools in McGill’s Faculty of Engineering and carry out important research projects that are funded through grants from government and industry. We have included in this report our members’ sustainability research projects. See Appendix B: TISED Members’ Funded Research Projects. To gain a more in-depth understanding of our members’ research, visit our members’ publications from this past year in Appendix C: TISED Members’ Publications.

TISED MEMBER’S MEETING TISED held our annual Member’s Meeting in October 2016. Members took the opportunity to share their input regarding TISED activities, audiences, and strategies for the upcoming year. Some of the topics identified as being of immediate interest to members in this meeting included: 1. TISED’s Research Workshop Program (RWP) What the program offers The research-policy interface 2. Scholars-in-Residence Program What the program offers Announcement of TISED 2016-2017 scholars 3. Plan for content and offering of current TISED Courses 4. SEDTalks! What the program offers Announcement of SEDTalks! graduate student ChangeMakers 5. Search for Trottier Chair in Sustainability Engineering and Design 6. Proposal of TISED M.Eng in Sustainability Engineering and Design 7. Consultation on award mechanisms for TISED Graduate Fellowships

Thank you to our TISED members!

PARTNERSHIPS The activities listed below serve as only a few examples of partnerships that TISED fostered this past year and that we consider an integral part of our foundation. We rely on strong partnerships at McGill University among researcher and student groups and provide mechanisms to work together towards achieving our shared vision for sustainability. TISED continued its role in the Advisory Board for student group Sustainability in Engineering at McGill (SEAM), and became members of the Action Team on Research as part of the McGill Office of Sustainability initiative “Vision 2020”. TISED actively participated or advertised in these events organized by our partners: Sustainability Speed Networking co-hosted by SEAM, TISED, and the Engineering Career Centre at McGill McGill Engineering Research Showcase hosted by McGill’s Faculty of Engineering An Urban Experiment, with Claire Weisz of ‘WXY + architecture + urban design’ hosted by the School of Architecture

Dr. Bakshi speaking at the Sustainability Assessment and LCA workshop Photo Credit: Owen Egan

Sustainability Assessment and LCA workshop, with Dr. Bhavik Bakshi of Ohio State University hosted by NSERC CREATE Green Chemistry The 2017 Sustainable Innovation through Green Chemistry Case Competition co-hosted by the Marcel Desautels Institute for Integrated Management (MDIIM), McGill Department of Chemistry (NSERC CREATE), and TISED AEESP Distinguished Lecture Series, by Dr. Menachem Elimelech of Yale University co-hosted by the Association of Environmental Engineering and Science Professors Foundation, Concordia University and TISED

RESEARCH High-calibre researchers and practitioners play vital roles in our institute. The past year especially has seen TISED reach higher academic achievements. We’ve also expanded our expertise and network of researchers with the collaboration of two scholars -in-residence and a visiting scholar. TISED has various offerings to support the advancement of sustainability through engineering and design, specifically related to sustainability and research innovation.

FACULTY SCHOLAR AWARDS The Panda Faculty Scholar Award in Sustainability in Engineering and Design was established through an endowed gift to the Faculty of Engineering from alumnus Ram Panda. In 20162017, the Panda Faculty Scholar in Sustainable Engineering and Design was used to continue to drive research. In this same year, we obtained a new gift which led to the creation of the John M. Bishop and Family Faculty Scholar Award in Sustainability in Engineering and Design intended for research that will reduce society’s dependency on non-renewable resources. The new Award will provide support to faculty members within TISED, specifically to engage one or more doctoral student(s) under their supervision, working in an area of strategic importance to the Faculty. We will be appointing our first recipient, a professor with an outstanding track record in research and scholarly activities, next year. The Faculty Scholar Awards support exploratory and highly innovative research in sustainability and enrich the teaching and research programs launched by TISED; partly by funding the Scholar’s doctoral students research, and partly by providing opportunities for outreach and policy work within the institute.

Visiting professor Dr. Mark O'Malley. Photo Credit: Owen Egan

SCHOLARS-IN-RESIDENCE & VISITING PROFESSORS We reviewed applications from leading scholars around the world to conduct collaborative research on advancing sustainability. Two scholars, Dr. Marney and Dr. Grimberg, were invited to participate in six-month residencies with TISED under our Scholar-in-Residence program. We also plan on hosting more scholars-in-residence next year, including Dr. Pedro Alvarez of Rice University, who researches environmental applications and implications of nanotechnology, water treatment and reuse, and antibiotic resistance control. The Scholar-inResidence program is a flagship initiative to enhance the activity and profile of research, education and public policy in the area of sustainability. In addition, TISED also welcomes visiting professors from universities around the world to enhance the activity and profile of research, education and public policy in the area of sustainability. This year we invited Dr. Mark Oâ€™Malley, a professor from University College Dublin, as the Flaherty Visiting Professor, an award created by the Ireland Canada University Foundation on a competitive basis. Our 2016-2017 scholars-in-residence and visiting professors are profiled in the following pages.

Dr. Chris Marnay, Principal, Microgrid Design of Mendocino In residence at TISED: December 2016 to May 2017

Over the last 15 years, Dr. Chris Marnay’s work and research has focused on microgrids and he has become an influential researcher in this area. Dr. Marnay brought his experience to bear, working with TISED and others on exploring the benefits of microgrids and their role in smart grid deployment and sustainable resilient communities. Dr. Marnay is a retired Staff Scientist currently affiliated with the China Energy Group. He worked at the Lawrence Berkeley National Laboratory for 29 years. He models economicenvironmental problems related to likely future adoption patterns of small-scale distributed energy resources (DER), especially when clustered in microgrids exercising local semiautonomous control and able to island. He was a member of the Consortium of Electric Reliability Solutions (CERTS) team that proposed the CERTS Microgrid concept, and has published a large body of research on microgrid principles, economics, and applications. Microgrids are seen as one of the key building block technologies that can permit communityscale integrated energy systems for small-scale renewables. Dr. Marnay’s work at TISED explores how we might develop multilevel energy systems based on microgrids, including how systems of different scales should be chosen to achieve optimum. His work helps to develop and extend optimization at various scales, and considers economic, technical, and policy factors. In April 2017, Dr. Marnay moderated the discussion at a public seminar during the two-day Research Workshop Program event hosted by TISED. This year’s theme was titled "Is there a role for microgrids in the energy future of Quebec?”.

Dr. Stefan Grimberg, Professor, Clarkson University In residence at TISED: January to June 2017 Anaerobic digestion researcher, Dr. Stefan Grimberg, collaborated with TISED and others to study the environmental, economic and associated policy implications of diverting source-separated organic waste from landfills to wastewater treatment plants. Additionally, Dr. Grimberg worked with TISED to assess and develop policies that minimize impact on the environment while realizing their energy and nutrient recovery potential. Dr. Grimberg is a Professor and former Chair of the Civil and Environmental Engineering Department at Clarkson University. He has published more than 50 journal articles, conference proceedings, and reports and has delivered more than 90 professional talks at academic conferences or universities around the world. Dr. Grimberg has been the investigator on research grants from the National Science Foundation, United States Department of Agriculture, Department of Energy, NYSERDA and other funding agencies. His research most recently has focused on anaerobic digestion of agricultural or other high-strength wastes for the generation of energy. In particular, his research group investigated the anaerobic digestion of sand-laden dairy manure for a midsize dairy farm in Northern New York. Dr. Grimberg also has been actively involved in the New York Water Environment Association as the Chair of the university committee and the Advisor to student chapters. At an upcoming TISED seminar in June 2017, Dr. Grimberg will be speaking about organic solid and municipal waste, including how share resource recovery processes can lead to a more circular resource economy, reducing environmental impact and using resources from waste.

Dr. Mark O’Malley, Professor, University College Dublin James M. Flaherty Visiting Professorship Dr. Mark O’Malley, a recognized world authority in Energy System Integration (ESI) and Grid Integration of Renewable Energy, assumed a James M. Flaherty Visiting Professorship hosted at TISED. The Professorship was made possible with support and an in-kind contribution from TISED, and was awarded to Dr. O’Malley and TISED by the Ireland Canada University Foundation (ICUF). Dr. O’Malley’s expertise, which has already informed ESI programs in Europe, the United States, and China, will help Quebec’s energy sector make a smooth transition to renewable energy. Dr. O’Malley is a Professor of Electrical Engineering at University College Dublin and the founding Director of the Electricity Research Centre, a multidisciplinary, multi-institutional, industry-supported research activity. He is a Member of the Royal Irish Academy and a Fellow of the Institute of Electrical and Electronic Engineers and has received two Fulbright Fellowships. He has active research collaborations in the United States (Department of Energy National Renewable Energy Laboratory) and China (Tsinghua University and State Grid China) and is Director and Co-founder of the International Institute for Energy Systems Integration and Coordinator of the European Energy Research Alliance Joint Programme in Energy Systems Integration. From April to September 2017 Dr. O’Malley is working closely with TISED members Dr. François Bouffard and Dr. Geza Joos and other Canadian experts to research topics around Electricity Systems Integration (ESI). TISED is facilitating the research collaborations, and is hosting a one‐week intensive course with leading energy institutions as well as an ‘ICUF James M. Flaherty Lecture’ called “Energy Systems Integration: a multidisciplinary global imperative for a low carbon society”.

ENDOWED CHAIR IN SUSTAINABLILITY IN ENGINEERING & DESIGN The endowed Trottier Chair in Sustainability in Engineering and Design has a critical role in advancing the goals and objectives of TISED through their leadership in research, teaching and outreach. Chairs are internationally recognized scholars who have excellent track records of collaborative research and policy insights, helping position TISED as a leading institute. The Chairâ€™s research expertise and interests also encourage collaboration with others at our university and beyond. Currently, TISED is interviewing leading scholars to fill the TISED Chair position. The successful candidate will be announced in summer, and it is expected that the candidate will begin their appointment in fall 2017. We expect the Chair will be contributing significantly to teaching and research, and play a critical role in advancing sustainability through their leadership as an internationally recognized expert

RESEARCH WORKSHOP PROGRAM One of TISED's core activities is facilitating seminars and workshops related to sustainability in engineering and design, with the goal of catalyzing interdisciplinary and interinstitutional research and advancing sustainability policy. Our "Research Workshop Program" (RWP) promotes forums for discussing cutting-edge advances in technology and design as well as policy frameworks and interventions required to advance sustainability. To effectively integrate these seminars and workshops with

Photo Credit: Owen Egan

research and education in our Faculty, TISED annually invites proposals from its members to organize and host seminars and workshops aligned with their research areas. TISED Scholars-in-Residence also deliver a research workshop in collaboration with a group of TISED members and external participants. During the research workshop, focussed discussions support development of a timely and topical publication and/or a research funding proposal. Seminar themes and the related publication or proposal will relate to sustainability in engineering and design. The public seminar features external and McGill speakers with distinguished research track-records (one or more from outside the Faculty of Engineering) in order to support interdisciplinary work.

The TISED Research Workshop asked, "Is there a role for microgrids in the energy future of Quebec?” Photo Credit: Owen Egan

POLICY HIGHLIGHT: IS THERE A ROLE FOR MICROGRIDS IN QUEBEC? On April 25th and 26th 2017, TISED hosted a two-day Research Workshop Program convening various stakeholders to on the topic of microgrids. TISED also held a public event on April 25th: "Is there a role for microgrids in the energy future of Quebec?”. The event was moderated by TISED Scholar-in-residence Dr. Chris Marnay. Microgrids are locally controlled power systems, such as university campuses, usually grid connected, but able to operate as electrical islands. They have become an increasingly familiar power sector feature in recent years, representing one of the three legs of the smart grid stool, together with enhanced megagrid operations and grid-customer interaction. Development of microgrids has followed a convoluted path that has led to high interest and significant activity in the U.S. and Japan, but with much less dynamism elsewhere, and with different drivers. Where Québec lies in the microgrid landscape is an open question. Dr. Marnay opened the event by providing an introduction to microgrids, reporting on the research and development that took place during the first decade of the century, and describing alternative future pathways the electricity supply sector may follow.

RWP Speakers’ presentations: 

What is a microgrid? Chris Marnay, Moderator, TISED Scholar-inResidence, McGill University



The Human Dimension Gretchen Bakke, Assistant Professor, Anthropology, McGill University



Grid Issues François Bouffard, Associate Professor, Electrical and Computer Engineering, TISED, McGill University



The Hydro Quebec Perspective Angelo Giumento, Manager Smart Grid & Technology Solutions at Hydro-Québec



Microgrid Activity around the World Peter Lilienthal, Chief Executive Officer (CEO), HOMER Energy



Québec & Canada’s Electricity Situation Pierre-Olivier Pineau, Professor, Department of Decision Sciences, Chair in Energy Sector Management, HEC Montréal



Microgrids in Australia Saad Sayeef, Research Scientist, CSIRO

The links above will take you to our YouTube page where you can watch videos of the presentations. Visit our Research Workshop Program page for more information.

POLICY HIGHLIGHT: OPEN FORUM WITH SENATE OF CANADA COMMITTEE TISED hosted, for the first time, a Senate of Canada Committee on February 8, 2017. During their visit at TISED, the committee learned about our carbon neutral activities, our role in the community, and our research projects relating to the environment and natural resources. The senators welcomed this as an opportunity to interact with students and the community to better understand the challenges, efforts and opportunities involved in transitioning to a low carbon economy. The Standing Committee on Energy, the Environment and Natural Resources has undertaken a sector-by-sector approach to examining Canada’s transition to a lower carbon economy. The committee’s goal is to understand the scope of the issues, identify key questions and considerations, and make recommendations to the federal government on how best to achieve Canada’s emission reduction commitments in a way that is sustainable, affordable, efficient, equitable and achievable.

Presentations to the Committee by TISED Members  Opening Remarks by Jim Nicell, Dean, Faculty of Engineering  Opening Remarks by Subhasis Ghoshal, Director, TISED  "Pathways for Canada’s transition towards electrification and sustainable

Transportation" by Benoit Boulet, Electrical & Computer Engineering  "The Flexibility Challenge" by Francois

Bouffard, Electrical & Computer Engineering  "Low Carbon Concrete Productions" by Yixin Shao, Civil Engineering  "Alternative Materials and Processes for a Low-Carbon Economy" by Jeffrey Bergthorson, Mechanical Engineering TISED welcomes the Senate of Canad. Photo Credit: Owen Egan

OUTREACH TISED actively shares expertise from sustainability leaders with its own academic community as well as academic communities in Montréal, Québec, and Canada. In 2016-2017, TISED hosted, and directly supported events where we focus attention on sustainability in engineering and its impact on and relevance to people’s lives. These events promote discussion with decision-makers, industry, researchers, and the public to increase engagement in science-informed policy.

TISED HOSTED & CO-HOSTED EVENTS Sustainability in Design 

Including nature in human decisions for innovation & sustainability in the Anthropocene – Public seminar with Dr. Bhavik Bakshi (2016)

Public Policy 

Senate of Canada Standing Committee on Energy, the Environment and Natural Resources - a TISED Open Forum! (2017)

Energy 



Is there a role for microgrids in Quebec? - Public lecture and Research Workshop Program (multiple speakers) (2017) Energy Systems Integration: a multidisciplinary global imperative for a low-carbon society - an ICUF James M. Flaherty Lecture by Prof. Mark O’Malley

Urban Sustainability 

An Urban Experiment: WXY Recent Work – Public lecture (part of McGill Architecture Lecture Series) by Claire Weisz, Principal-in-charge WXY (2016)

Water 

Green Roofs for Stormwater Retention and Flowrate Attenuation - Public lecture by Dr. Denis O'Carroll, UNSW (2017)

Other Events 



Sustainable Innovation through Green Chemistry - Public lecture, Howie Honeyman and Adrian Horotan (2017) Fourth Annual Trottier Symposium on Sustainable Engineering, Energy and Design (2017)

EVENT HIGHLIGHT: FOURTH ANNUAL TROTTIER SYMPOSIUM ON SUSTAINABLE ENGINEERING, ENERGY AND DESIGN A large fraction of fossil fuels is consumed – quite inefficiently – in the transportation of goods and people. Consequently, reaching GHG reduction goals will require major transformations in th is sector of activity. The Annual Trottier Symposium series contributed to this mandatory energy transition by dedicating its fourth symposium to the transportation industry and the challenges it faces by exploring a number of possible futures, knowing that many upcoming technologies make the transition to a low-carbon society more likely every day. Technology alone will not be enough, however, and the introduction of new, disruptive technologies is a ripe opportunity to re-evaluate our portfolio of transit tools. And if we take advantage of this opportunity to revisit the goals of transportation, urban design, and the public and private vision, not only can we obtain environmental benefits, but also economic and social ones. SPEAKER | Hervé Levifve: Communities and businesses today are innovating to find solutions to metropolitan passenger mobility: toughening up access regulations, mobilizing property to serve logistics in urban areas, new forms of organization, calls for innovation, pooling of flows, inte lligent solutions to the delivery of parcels to individuals. There is no single solution, but a set of avenues that take into account the diversity of urban fabrics and are tailored to the fifty or so economic sectors that are present in cities. Somewhere between rusticity and innovation, we put forward a panorama of ecological economic solutions for consideration. SPEAKER | Marie-Hélène Massot: Shuttling between the demands of hypermodernity, the evolution of the territory of daily life, the identification of behavioural rationalities and the observation of strategies deployed by actors provides the foundation for our reflections on how tomorrow’s mobility will be thought out and organized. SPEAKER | Peter Norton: Technological innovation gives us new choices and new means to pursue them, but it doesn’t tell us what we should seek. Yet strangely we often find technology itself cast as the answer. The proffered high-tech solutions are “data driven,” as if no one need ask which data matter or what they really tell us. Asking such questions does not make you a Luddite. It means you appreciate the best that technology has to offer: new means to pursue ends of humans’ choosing. It’s to recognize that we have a spectrum of choices —high-tech, low-tech, and no-tech. SPEAKER | Anthony Perl: This presentation assessed the legacy of urban mobility infrastructure development in Montreal, Toronto and Vancouver to identify each city’s point of departure for a

post-carbon mobility transition. Options for expanding electri c mobility infrastructure were considered, along with urban development strategies that encourage accessibility by nonmotorised travel. Lastly, the role of disruptive mobility agents from autonomous vehicle producers to ride sharing organizations was examined.

Photo Credit: Owen Egan

EVENT HIGHLIGHT: GREEN ROOFS FOR STORMWATER RETENTION AND FLOWRATE ATTENUATION This seminar by Denis M. Oâ€™Carroll, Associate Professor in Civil and Environmental Engineering at UNSW Australia, provided an important introduction to green roofs. Green roofs are becoming popular in North America as they are effective tools for managing stormwater runoff in urban areas. However, the implementation of green roofs in North American urban environments remains underused, in part due to a lack of climate appropriate green roof design guidelines. A greater understanding of how green roofs perform with respect to fundamental stormwater management processes, such as stormwater retention and peak flow attenuation, is required. This study investigated the impact that differing climates have on the retention performance of three green roofs in three distinct Canadian climates (i.e., London, Calgary, and Halifax). Data were collected over 2.5 growing seasons. The impact of climate on stormwater retention will be discussed in addition to the extent to which green roofs attenuate stormwater peak flow.

STUDENT SUPPORT TISED MATCHING FUNDS PROGRAM TISED’s generous benefactor, alumnus Lorne Trottier, with support from the McGill Faculty of Engineering, set aside funding as matching funds to encourage other named donors to support initiatives that benefit students, such as:  

Faculty Scholar Awards Graduate Fellowships



Education enhancement initiatives



Undergraduate Internships (SURE)

Donors, both new and existing, have the opportunity to establish named endowments in the area of sustainability in engineering and design. The 2016-2017 graduate fellowships included: Yee Wei Foong, Materials Engineering Electrochemical Modeling of Electron Transfer in Renewable Energy Materials Supervisor: Kirk H. Bevan Mike Zahn Fellowship & Uma and Mahesh Sharma Graduate TISED Fellowship Sanja Bajic, Electrical and Computer Engineering Multiband/Multi-Mission Energy Storage System Management and Design for Microgrids Supervisor: François Bouffard, Co-Supervisor: Geza Joos Ciro Robert Martoni Fellowship in Sustainable Engineering Ilias Zenelis, Electrical and Computer Engineering Developing Efficient Tools for Voltage Stability Analysis of Power Systems with Renewable Energy Sources Supervisor: Xiaozhe Wang John M. Bishop and Family Fellowship for Sustainability in Engineering and Design (TISED)

Vinicius Bueno, Civil Engineering Development of Sustainable, Low Toxicity, Functional Nanomaterials Supervisor: Subhasis Ghoshal Redwood Graduate TISED Fellowship Marzuq Ajani, Electrical and Computer Engineering Cooperative Fast-Charger Constellation Management for the Electrification of Road Transport in Remote Grids Supervisor: François Bouffard Kauser Family Graduate TISED Fellowship Wooseok Do, Civil Engineering Social Welfare Systems Analysis of Road Capacity Expansion Options Supervisor: Rouhani Omid Mohammadzadeh Redwood Graduate TISED Fellowship Agil Azimzada, Chemical Engineering Sustainable Manufacturing: Nanomaterials Released From Building Materials and Coatings Supervisor: Nathalie Tufenkji Mike Zahn Fellowship

In addition to the above Fellowships, we also provide student support through our Education Enhancement initiatives. These include: 

The Ken and Lois Radcliffe Endowment for Educational Enhancements in Sustainability



The Peter and Karen MacKinnon Endowment for Educational Enhancements in Sustainability and Design



The Tom Pavlasek Education Enhancement Fund



The Michael Paidoussis Education Enhancement Fund

Recognition and thanks are extended to the many generous donors participating in the matching funds program who have already enabled the creation of the following endowed graduate fellowships, undergraduate research awards and education enhancement initiatives!

TISED SUMMER UNDERGRADUATE RESEARCH IN ENGINEERING (SURE) AWARDS These awards enabled undergraduate students to learn more about their discipline through paid summer research traineeships, get exposure to research, and learn more about the graduate school experience. The 2016 TISED SURE projects and awards included: Azat Kasimov, Chemical Engineering Porous Plasma Deposited Thin Organic Coatings Containing Metals for Catalysis Supervisor: Pierre-Luc Girard-Lauriault David Selby SURE Awd Sustainable Engineering Mr. & Mrs. Lee Hee Chong and Mr. & Mrs. David Su Toye SURE Award (Sustainability) Philippe Dallemagne, Civil Engineering Analysis of Mixing in Shallow Flows Supervisor: Susan Gaskin John Bishop TISED SURE Award in Sustainable Engineering Harry Marksfield SURE Award Allan & Linda Stephens SURE Award in Sustainability Engineering

Abdelrahman Elzoka, Mining & Materials Engineering Pipeline Wear in Minefill Distribution System Supervisor: Faramarz Hassani Harry Marksfield SURE Award Kimia Tahmasebi, Chemical Engineering Pilot scale testing of Catalytic Ozonation for the removal of Contaminants of Emerging Concerns and Toxicity Supervisor: Viviane Yargeau William Harker SURE Award in Sustainability in Engineering & Design Kerry Lawless, Chemical Engineering Designing Self-Assembled 3D Nanostructures for Water Treatment Supervisor: Nathalie Tufenkji Brian Hirst SURE Award in Sustainable Engineering

Mamdouh Jaber, Civil Engineering Bioremediation of Petroleum-Contaminated Sites Supervisor: Subhasis Ghoshal John Bishop TISED SURE Award in Sustainable Engineering

Vivian Tse, Other (Non-Engineering Mcgill Student) Printing Nanodots on Viscoelastic Substrates for Cell Contractile Work Measurements Supervisor: Allen Ehrlicher Brian Hirst SURE Award in Sustainable Engineering

Afreen Khizer Aliya, Electrical & Computer Engineering Setup of a Simulation Environment for Microgrid Control with Energy Storage Systems and Responsive Demand Supervisor: Franรงois Bouffard Harry Marksfield SURE Award

Huiyuan Yang, Mechanical Engineering Rapid Prototyping of Biological Tissue Constructs Supervisor: Joseph Kinsella Mr. & Mrs. Lee Hee Chong and Mr. & Mrs. David Su Toye SURE Award (Sustainability)

Sarah Mitchell, Other (Non-Engineering Mcgill Student) Development of Ozone Treatment for Anaerobic Digestion to Increase Sustainable Energy Production and Reduce Biosolids Production During Wastewater Treatment Supervisor: Dominic Frigon Boersma SURE Award Heather Mantel, Mining & Materials Engineering Improvement of Quantitative X-Ray Microanalysis of a Diffusion Couple by Measuring Physical Parameters of the X-Ray Detector Supervisor: Raynald Gauvin Claudia Macedo Memorial SURE Award in Sustainable Engineering

Yinfeng Zhang, Civil Engineering Fate of Engineered Nanoparticles in Wastewater Supervisor: Subhasis Ghoshal Boersma SURE Award William Harker SURE Award in Sustainability in Engineering & Design Brian Hirst SURE Award in Sustainable Engineering

EDUCATION AND TRAINING TISED COURSE ON "ENERGY ANALYSIS" Offered by TISED and sponsored by Fondation 3E, “Energy Analysis” (FACC 510: Selected topics in the Faculty of Engineering), was offered in fall 2016 to students from various Faculty of Engineering programs. Professor Jeffrey Bergthorson did a great job teaching the course, or so say his course evaluations and the teaching award he won this year! The course lays out the economic and environmental challenges that our society faces due to our rapid consumption of fossil fuels. Students assess their energy use and environmental footprint and recognized that the challenge ahead is serious. The course provides students with the knowledge and problem-analysis skills to investigate different solutions for primary clean electricity generation, as well for transport or backup power generation. To identify and assess potential clean energy options, the course covers the key aspects of energy literacy, including fundamental thermodynamics, energy concepts, and various energy metrics. Students critical analyze and discuss traditional and alternative energy and power systems and why their proposed clean energy solutions are, or are not, viable commercial options. The analysis of alternative power systems uses a multidiscipli nary and integrated design approach that includes life-cycle and economic analyses. Students developed their ability to think critically, apply rigorous methodology to complex design problems, and to supplement technical design with economic analysis. By the end of the course, students learned:     

Energy: now and in future Energy metrics Alternative Primary Power-Generation Systems Alternative Energy-Storage and Secondary Power-Generation Critical Analysis and Application of Theory

TISED COURSE ON "SUSTAINABLE URBAN COMMUNITIES" Offered by TISED and sponsored by Fondation 3E, “Sustainable Urban Communities” (FACC 511: Selected topics in the Faculty of Engineering) in winter 2017 is for senior undergraduate and graduate students in the Faculty of Engineering as a logical sequel to FACC 510, the “Energy Analysis” course. Professor Stefan Grimberg from Clarkson University (a TISED Scholar-inResidence) taught the course, which examines the application of energy analysis in re-designed and re-developed plans for sustainable urban communities with a distinct focus on energy and materials use and savings. The course includes considerations of emissions reductions from the building and transportation sectors, and commercial off-the-shelf technologies (COTS) for energy management and emissions reductions. The course emphasizes critical thinking through solving complex design problems on real sites, technical and modelling analyses of energy systems, and the physical, economical and societal constraints and effects of design strategies on the sustainability of urban environments. Students applied their newfound tools in sustainable community building to execute the design projects throughout the course in such areas as wastewater, recycling, green buildings, traffic, community development, and energy efficiency. By the end of the course, students learned:  

Links between energy metrics and GHG intensity Trade-off of solid waste management strategies



Basic Life Cycle Analysis metrics



Economic and environmental trade-offs of distributed energy generation in urban settings

MASTERS PROGRAM IN SUSTAINABILITY IN ENGINEERING AND DESIGN Work has started towards the planning of an interdisciplinary Masters Program in Sustainability in Engineering and Design. This non-thesis Master’s program will include over twenty existing (revised) courses from current programs that offer choices of subject area “streams” in which a student can specialize, and eight new courses which form the “core” courses all students will take. The streams will be generally in the areas of Sustainable Infrastructure and Urban Development, Renewable Energy and Energy Efficiency, and Sustainable Industrial Processes and Manufacturing. The work is being funded by the Office of the Provost and by a gift by John M. Bishop and family. The planning work and curriculum proposal development is being led by the TISED Academic Committee members:          

Prof. Prof. Prof. Prof. Prof. Prof. Prof. Prof. Prof. Prof.

Madhav Badami, School of Urban Planning Jeffrey Bergthorson, Mechanical Engineering Vikram Bhatt, School of Architecture François Bouffard, Electrical and Computer Engineering Allen Ehrlicher, Bioengineering Dominic Frigon, Civil Engineering Subhasis Ghoshal, TISED Director (Committee Chair) Jan Kopyscinski, Chemical Engineering Mustafa Kumral, Mining and Materials Engineering Yaoyao (Fiona) Zhao, Mechanical Engineering

Two of our SEDTalks! Changemakers. Photo Credit: Owen Egan

EDUCATION HIGHLIGHT: SEDTALKS! In 2016, we launched ‘SEDTalks!’, a platform for student researchers to share their sustainability science and engineering research, develop professional skills in public-speaking and communication, expand their academic and industrial networks, and work with other researchers to make an impact on sustainability through engineering and design. As an educational and skills-building series, SEDTalks! allow graduate students in McGill's Faculty of Engineering to learn, make connections, and advance sustainability through stateof-the-art McGill research in one of these three areas:  

Sustainable Industrial Processes & Manufacturing Renewable Energy & Energy Efficiency



Sustainable Urban Infrastructure

We received many great applications from interested graduate students and three were selected to participate in the program. These three "SEDTalks! ChangeMakers" received coaching from researchers and trainers to showcase their great work in sustainability at the SEDTalks! networking event. Invited event guests included donors who support SEDTalks!, industry members, faculty members, students, alumni, and others. As part of the program, we also hosted a networking cocktail, giving our ChangeMakers a chance to further their connections with TISED's academic and industrial partners. After many hours of professional coaching and practice sessions, each ChangeMaker gave an engaging 18-minutes talk about their sustainability-related research to a captivated audience at the SEDTalk event. Watch the SEDTalks! videos on our YouTube channel.

Meet our 2016 SEDTalks! ChangeMakers: Saloumeh Ghasemian, Chemical Engineering Cleaning Water with Electricity: The Importance of Electrode Materials for Depollution and Disinfection Supervisor: Sasha Omanovic (TISED Member) Sarayu Rao, Civil Engineering The Fate of Nanomaterials in the Environment: Finding the Missing Link for a Sustainable Nano-Future Supervisor: Subhasis Ghoshal (TISED Member) Zhen Yin, Mechanical Engineering Using Nature and Architecture to Create Superior Materials: Turning Waste into Treasure Supervisor: Franรงois Barthelat (TISED Member)

Presentation by a Changemaker at the SEDTalks! event. Photo Credit: Owen Egan

EDUCATION HIGHLIGHT: SUSTAINABLE INNOVATION CASE COMPETITION PROMOTES CROSS-FACULTY COLLABORATION Green chemistry is a rapidly growing area for industry as companies grapple with increased regulatory requirements, supply constraints, and consumer demands for sustainable products. Challenges associated with the marketability of clean technologies must be considered for effective implementation. Each year, TISED, the Marcel Desautels Institute for Integrated Management (MDIIM), and the NSERC CREATE in Green Chemistry program, partner to offer a “Sustainable Innovation through Green Chemistry” workshop and case competition. This event brings academic and thought leaders together to impart their knowledge on the innovative potential Green Chemistry holds in guiding product design and business decisions through a series of interdisciplinary seminars. A case competition is also held where mixed teams of graduate students from Engineering, Chemistry, and Management build a strong business case for introducing sustainable products and phasing out riskier alternatives.

Two public lectures were featured at this year’s event: Commercializing Green Chemistry: New Ideas with Old Concepts By Howie Honeyman, CEO of Forward Water Technologies Commercializing green chemistry, materials, or engineering processes adds new dimensions to some of the established frameworks for advancing new technologies into the market place, but not without significant hurdles. Investing in Safer Chemistry By Adrian Horotan, Partner at Safer Made As the science on the health effects of harmful chemicals continues to develop, so does public awareness, influencing purchasing decisions, and leading brand manufacturers and retailers are taking notice.

Watch the presentation videos here to learn more.

FINANCIAL REVIEW SUPPORT FOR INTELLECTUAL LEADERSHIP: This year, TISED received a generous gift from the Bishop family to recognize and support interdisciplinary research excellence in the area of sustainability in engineering and design. The gift led to the creation of the John M. Bishop and Family Faculty Scholar Award in Sustainability in Engineering and Design intended for research that will reduce society’s dependency on non-renewable resources. We will be appointing our first recipient, a professor with an outstanding track record in research and scholarly activities, next year. In addition, alumnus Ram Panda continued his generous support to the Faculty of Engineering by financially supporting TISED’s Panda Faculty Scholar in Sustainability in Engineering and Design.

ADVANCING SCHOLARLY RESEARCH EXCELLENCE: TISED extended our commitment to collaborative research efforts through our continued investment in our Scholars-in-Residence program. This program brings renowned researchers and scholars from around the globe to share and enrich TISED’s and the Faculty of Engineering’s research and teaching endeavours. Our scholarscontinue to advance TISED’s goals for sustainability in engineering and design by conducting collaborative research with faculty, teaching courses and presenting guest lectures, and engaging in discussions with graduate and post-grad researchers. We also actively invite our visiting scholars to deliver public seminars, sharing their expertise as part of our research workshop program, with the ultimate goal of drafting a white paper on sustainability policy in collaboration with various experts from academia, industry and government. This year we hosted two scholars -inresidence as well as a visiting scholar, and already have another confirmed for next year.

ENCOURAGING STUDENT RESEARCH: TISED was also active in sponsoring student research events, including conferences and symposiums like the McGill Engineering Research Showcase (MERS), and hosting the poster showcase integrated into our Research Workshop Program and featuring research from many students in the Faculties of Engineering and Science. TISED also provided funding and awards for twelve SURE (Summer Undergraduate Research in Engineering) projects as part of our commitment to fostering sustainability research to students of all levels.

STUDENT TRAINING AND DEVELOPMENT: This year, TISED developed and offered two sustainability-related courses to select students across the Faculty of Engineering, “Energy Analysis” in Fall 2016, and “Sustainable Urban Communities” in Winter 2017, with financial support from Fondation 3E. These classes were designed to lay out and examine existing challenges relating to sustainability and provide the knowledge and problem-solving skills to enable students to engineer comprehensive solutions. Workshops for students were supported through TISED again this past year, allowing many students to receive direct training relating to sustainable engineering and design.

AUGMENTING THE STUDENT MATCHING FUNDS PROGRAM: Donor support of the matching funds program has been very positive and is presented in the student support section of this report.

PROMOTING OUTREACH AND PUBLIC INTERACTION: TISED collaborated with various McGill units, and other groups, on events, workshops and conferences over the past year. In partnership with McGill’s School of Architecture, TISED cohosted a public lecture by Claire Weisz (Principal-in-charge, WXY architecture + urban design) on November 14, 2016. Additionally, TISED partnered with The Marcel Desautels Institute for Integrated Management (MDIIM) and McGill department of Chemistry (NSERC CREATE) for the 5th Annual Public Lecture on Sustainable Innovation through Green Chemistry in February, 2017. In 2016, TISED launched ‘SEDTalks!’, a platform for graduate student researchers to share their sustainability-related research with academia, industrial partners and the public. We created this opportunity to allow these researchers to develop their communication skills with professional coaching, expand their academic and industrial networks, and work with other researchers to make an impact on sustainable engineering and design. As part of the program, we also hosted a networking cocktail, giving our SEDTalks ChangeMakers a chance to connect with TISED’s academic and industrial partners. TISED also supported and collaborated on various events with its partner l’Institut de l'énergie Trottier, particularly, the annual Trottier Symposium on Sustainable Engineering, Energy and Design. Collaborating with these units is beneficial in further developing a culture and community of sustainability experts while also engaging decision-makers and the public.

A LOOK AHEAD PUBLIC EDUCATION AND OUTREACH We look forward to again hosting a number of educational events , many open to the public, including our Fifth Annual Trottier Symposium on Sustainable Engineering, Energy and Design, co-hosted with Institut de l’énergie Trottier. All our events are advertised on social media and our website so keep an eye open for all announcements!

CURRICULUM In fall 2017, we are again offering “Energy Analysis” to engineering, architecture and urban planning students. Listed as “FACC 510: Selected Topics in the Faculty of Engineering”, this course explores and quantifies the centrality of energy flows on welfare and development as well as the impacts of their production and use on environmental services. In 2017-2018, the TISED Academic Committee will continue its work help develop the Master’s Degree in Sustainable Engineering and Design. This program is unique in Canada, and will provide an interdisciplinary learning environment in which students will obtain a robust understanding of core issues of sustainability and develop their abilities to address these considerations in the professional context. The program introduces eight new core courses to McGill and draws from over twenty (revised) courses, currently being offered through the Faculty of Engineering.

POLICY AND RESEARCH Our thematic priorities include Sustainable Infrastructure and Urban Development, Renewable Energy and Energy Efficiency, and Sustainable Industrial Processes and Manufacturing. Our 2017-2018 “Research Workshop Program(s)” will highlight pressing policy questions and mobilize the research and application to answer them. We will likely recruit more TISED Scholars-in-Residence this coming year! They will collaborate with our researchers, as well as partners in public outreach and policy, all while interacting with McGill students and the university community at large. It is anticipated that the Trottier Chair in Sustainability in Engineering and Design will be with joining after August 2017. The Chair will play a critical role in advancing sustainability through

their leadership as an internationally recognized expert whose research expertise and interests also encourage collaboration with others at our university and beyond.

IGEE Summer School

APPENDIX A: TISED MEMBERS Jorge Angeles Madhav Badami Francois Barthelat Jeff Bergthorson Kirk Bevan Vikram Bhatt Lisa Bornstein FranĂ§ois Bouffard Benoit Boulet Andrew Boyd Richard Chromik Luca Cortelezzi Sylvain Coulombe George Demopoulos Allen Ehrlicher Ahmed El-Geneidy RaphaĂŤl Fischler Avi Friedman Dominic Frigon Susan Gaskin Ronald Gehr Subhasis Ghoshal Michael Jemtrud Geza Joos Anne-Marie Kietzig Jan Kopyscinski Mustafa Kumral Fabrice Labeau Tho Le-Ngoc Jinxia Liu Xinyu Liu Nik Luka Aditya Mahajan Mohamed Meguid Brett Meyer Luis Miranda-Moreno Frank Mucciardi Van-Thanh-Van Nguyen Jim Nicell Dan Nicolau

Department of Mechanical Engineering School of Urban Planning Department of Mechanical Engineering Department of Mechanical Engineering Department of Mining and Materials Engineering School of Architecture School of Urban Planning Department of Electrical & Computer Engineering Electrical and Computer Engineering Department of Civil Engineering and Applied Mechanics Department of Mining and Materials Engineering Department of Mechanical Engineering Department of Chemical Engineering Department of Mining and Materials Engineering Department of Bioengineering School of Urban Planning School of Urban Planning School of Architecture Department of Civil Engineering and Applied Mechanics Department of Civil Engineering and Applied Mechanics Department of Civil Engineering and Applied Mechanics Department of Civil Engineering and Applied Mechanics School of Architecture Department of Electrical & Computer Engineering Department of Chemical Engineering Department of Chemical Engineering Department of Mining and Materials Engineering Department of Electrical & Computer Engineering Electrical and Computer Engineering Department of Civil Engineering and Applied Mechanics Department of Mechanical Engineering School of Architecture Department of Electrical & Computer Engineering Department of Civil Engineering and Applied Mechanics Department of Electrical & Computer Engineering Department of Civil Engineeri ng and Applied Mechanics Department of Mining and Materials Engineering Department of Civil Engineering and Applied Mechanics Department of Civil Engineering and Applied Mechanics Department of Bioengineering

Sasha Omanovic David Plant Nathaniel Quitoriano Omid Rouhani Agus Sasmito Patrick Selvadurai Yixin Shao Thomas Szkopek Nathalie Tufenkji David Wachsmuth Xiaozhe Wang Kristian Waters Viviane Yargeau Yaoyao Fiona Zhao

Department of Chemical Engineering Department of Electrical & Computer Engineering Department of Mining and Materials Engineering Department of Civil Engineering and Applied Mechanics Department of Mining and Materials Engineering Department of Civil Engineering and Applied Mechanics Civil Engineering Electrical and Computer Engineering Department of Chemical Engineering School of Urban Planning Department of Electrical & Computer Engineering Department of Mining and Materials Engineering Department of Chemical Engineering Department of Mechanical Engineering

APPENDIX B: TISED MEMBERS’ FUNDED RESEARCH PROJECTS The funding below is self-reported from our TISED members. Members were asked to provide reporting of their funding related to supporting sustainability work. Grants are listed alphabetically according to TISED member’s last name (bold). These grants were all held at some point from May 1, 2016 to April 30, 2017.

Principal and Co-Investigators

Funding Source

Program

F. Hassani (PI), J. Angeles,FRQNT

Projets

Accelor-Mittal Inc.

orientée en partenariat

Project Title

recherche Définir,

développer,

Amount

déployer,

Duration

$300,000

2015-2018

$170,000

2012-2017

$15,000

2015-2016

$379,680

2015-2018

$230,000

2015-2018

tester et valider des technologies et procédés avancée de surveillance,

contrôle

d’automatisation afin permettre l’opération à distance de foreuses rotatives F. Barthelat

Natural Sciences and Discovery Grant

High-performance

Engineering

architecture materials

Research

bio-inspired

Council (NSERC) F. Barthelat

F. Barthelat

Natural Sciences and Engage Grant

Embrittlement Mechanisms

Engineering Research Council (NSERC)

Polymer Lenses for Protective Eyewear.

Natural Sciences and Strategic Engineering Research Grant Council (NSERC)

Barthelat

(principal), C.Fonds de recherche du Team Grant

Partnership New Laser-Engraving Strategies for the Manufacturing Toughened Glass.

Optimization, Fabrication and

36 Barrett (Chemistry, McGill), A.QuĂŠbec - Nature et J. Ehrlicher (Bioengineering,technologies (FQRNT)

Testing of Three-Dimensional Materials Inspired from Nacre.

McGill) F. Barthelat

F. Barthelat

Natural Sciences and Discovery Grant Engineering Research

Architectured and bio-inspired materials to expand property

Council (NSERC)

space

Natural Sciences and DND Discovery Engineering Research Supplement

F. Barthelat

Grant Architectured and bio-inspired materials to expand property

$235,000

2017-2022

$120,000

2017-2020

Council (NSERC)

space

Natural Sciences and Engage Engineering Research

Bioinspired, flexible ceramic protection for industrial gloves

$25,000

2017

Natural Sciences and CHRP Engineering Research

New toughened biocompatible and biodegradable bone graft

$326,445

2017-2020

Council (NSERC), CIHR

substitutes $155,000

2012-2017

$1,650,000

2013-2018

$180,000

2015-2017

Council (NSERC) F. Barthelat and M. Tanzer

Bergthorson

Investigator)

(Principal Natural Sciences and Discovery Grant Engineering Research Council (NSERC)

Advanced

combustion

technologies for clean energy from low-calorific alternative fuels

M. Thomson (Principal Natural Sciences and CREATE Investigator), J. Bergthorson, S.Engineering Research

CREATE program combustion engines

clean

Dworkin, P. Kirchen, J. Wallace,Council (NSERC) M. Zheng J. Bergthorson

Networks of Centres of

Experimental

Excellence

Nitric

(NCE),

Oxide

investigation

production

37 BioFuelNet

Bergthorson

conventional and bio-derived fuels at engine-relevant pressures

(Principal Natural Sciences and Collaborative

Investigator), A. Steinberg

Engineering Council

Research An integrated approach to fuel -

$432,000

2015-2018

$468,000

2015-2018

$180,000

2015-2017

$25,000

2016-2016

$330,000

2017-2021

$212,000

2017-2019

Research and Development Grants flexible injector design (NSERC), (CRD)

Supporting organization: SiemensADGT (formerly RollsRoyce Canada) J. Bergthorson (Principal), A.Natural Sciences and Collaborative

Research An Integrated Approach to Fuel -

Steinberg

Engineering Research and Development Grants Flexible Injector Design Council (NSERC) (CRD)

J. Bergthorson

Siemens-Analog Devices Not specified

Experimental Investigation on NO

General Trias (ADGT), Ltd. (formerly Rolls-

Production in Conventional and Bio-Derived Fuels at Engine-

Royce Canada)

Relevant Pressures

Natural Sciences and Engage Grant Engineering Research

Feasibility analysis of iron-fuel combustors to power mining

Council (NSERC)

operations communities

Natural Sciences and Discovery Grant

Metal Fuels for Zero-Carbon Heat

Engineering Research Council (NSERC)

and Power

J. Bergthorson

and

remote

J.M. Bergthorson (principal) &Fonds de recherche du Project de Recherche en Recherche fondamentale sur la D.L. Frost

QuĂŠbec

Nature et Equipe // Team Grant

combustion des poudres mĂŠtalliques pour une application

38 technologies (FQRNT)

dans le domaine de l'énergie // Fundamental

studies

powder flames applications E. Shafirovich (U Texas El Paso),U.S. National Science International J.M. Bergthorson

Foundation

Bergthorson, J., Gaskin, S.,MITACS Dworkin, S. & Steinberg, A.

for

ofmetal energy

Research IRES: US - Canada Collaborative

$249,965

2017-2019

Next Generation Engine

$160,000

2016-2016

Research The design and mapping of next

$650,000

2014-2018

$40,000

2013-2017

$115,000

2012-2016

$192,000

2013-2016

Experience for Students Research on Combustion of (IRES) Metals as Clean Energy Carriers

Accelerate Grant

K. H. Bevan

Natural Sciences and Collaborative

(Principal Investigator), P.

Engineering Research and Development Grants generation nano Council (NSERC) (CRD) with Hydro-Quebec battery cathodes

lithium-ion

Grutter K. H. Bevan Investigator)

(Principal MITACS Quebec

and

Hydro- N/A

Computational nanoscale design of high capacity lithium battery cathodes

K. H. Bevan Investigator)

(Principal Natural Sciences and Discovery Grant Engineering Research Council (NSERC)

Z. Mi, K. H. Bevan (Principal Fonds de recherche du Québec Equipe Investigator), H. Guo, and M.Québec - Nature et

Computational design of next generation nanoelectronic materials

Solar hydrogen fuels : artificialphotosynthesis on metal -

39 Benoit

technologies (FQRNT)

G. Vachon (Principal), M.The Social Sciences and Partnership Grant Allard, S. Bernier-Lavigne, V.Humanities Research

nitride nanowire arrays Habiter le nord québécois : Mobiliser, comprendre, imaginer

$2,046,176

2015-2020

$200,000

2017-2019

$150,000

2016-2019

$1,149,100

2017-2021

$120,000

2013-2017

Bhatt, M. Blais, P. Côté, G.Council (SSHRC) Duhaime, P. Evans, L. Piccon, D. Piché, M. Riva, T. Rodon, F. Rudolf, M-È. Vaillancourt G. Lizarralde (PI), L. Bornstein, Fonds de recherché du FQRSC soutien aux equips Controverses théorique et D. Labbe, C. Davidson, I Québec – Société et de recherche pratiques liées à la vulnérabilité, Thomas culture (FQRSC) la resilience et la reconstruction durable M. Kummert (PI), D. Pearl, L. L’Institut de l’énergie Bornstein Trottier (IET)

Des réseaux de chaleur de 4e generation au cœur des quartiers durables

G. Lizarralde (PI), L. Bornstein, International D. Labbe + partners in Haiti, Development Research Chile, Colombia, and Cuba Centre (IDRC)

Climate Change Adaptation in Informal Settings in Latin American and the Caribbean: Understanding and Reinforcing Bottom-Up Initiatives

F. Bouffard Investigator)

(Principal Natural Sciences and Discovery Grant Engineering Research Council (NSERC)

Demand-side flexibility in lowcarbon grids

F. Bouffard

MITACS

Optimal Retrofit Energy Storage Asset Selection for Off-Grid

$10,000

2016-2016

$75,000

2016-2021

$650,000

2016-2019

$1,500,000

2015-2020

Communities

F. Bouffard

McGill University

G. Joos (Principal Investigator),InnovÉÉ/ F. Bouffard, B. Boulet

Sciences Engineering

Natural and Research

Council (NSERC)/ Hydro-Québec/OPAL-RT

William Dawson Scholar Not specified

Integrated

Infrastructure

for

Transportation Electrification and Renewable Distributed Generation

Technologies G. Joos (Principal Investigator)Natural Sciences and and F. Bouffard Engineering Research Council (NSERC)

Industrial Research Chair on the Integration of Renewable Energies Generation

and into

Distribution Grid

Distributed the Electric

A.J. Boyd Investigator)

(Principal Natural Sciences and Discovery Grant Engineering Research

$130,000

2013-2018

$250,000

2014-2016

High ionic concentration seawater exposure

$300,000

2014-2016

R.R. Chromik , J. Song and S.Natural Sciences and Strategic Project Grant

Composite

$460,717

2013-2016

Yue

manufactured by cold spray

$1, 451,000

2013-2016

Council (NSERC)

A.J.

Boyd

Evaluating the combined effects of stress and exposure on the

Canada

(Principal Quick Mix Beton

deterioration rate of concrete

Industry Sponsor

Investigator)

A.J. Boyd Investigator)

Durability of Concrete in the Arabian Gulf

(Principal Quick Mix Beton

Industry Support

Engineering Research Council (NSERC)

M. Levesque, M. Brochu, P.Natural Sciences and Collaborative Bocher and R.R. Chromik

Engineering Council

Research Shot peening for fatigue life

Research and Development (CRD) (NSERC)/

Consortium Research

for and

Innovation in Aerospace in QuĂŠbec (CRIAQ)/MITACS

coatings

improvement structures

aerospace

M. Balazinski, P. Bocher , M.Natural Sciences and Collaborative Research Machining effects on part Jahazi, R. Sedaghati, V.Engineering Research and Development (CRD) integrity and life of aircraft Songmene, (Principal

M. BrochuCouncil Investigator),Consortium

R.Chromik(Co-Principal Investigator)

(NSERC)/ for

$540,000

2013-2016

$932,850

2013-2016

$4,628,524

2012-2016

$150,000

2011-2016

materials

Research and Innovation in Aerospace in

QuĂŠbec

(CRIAQ)/MITACS

B. Klein, F. P. Mucciardi,Natural Sciences and Collaborative Research Pipeline wear in Radziszewski, S. Sander, F. F.Engineering Research and Development (CRD) distribution systems Hassani (Principal Council (NSERC) Investigator), R.R. Chromik (CoPrincipal Investigator)

mine

fill

J. Angeles , P. Caines, G. Joos,Natural Sciences and Automotive Partnership Development of optimal electrical D. Lowther, P.Radziszewski, B.Engineering Research Canada (APC) drive trains for on-road vehicles Boulet (Principal Council (NSERC) Investigator), R.R. Chromik (CoPrincipal Investigator)

R.R. Chromik Investigator)

(Principal Natural Sciences and Discovery Grant Engineering Research Council (NSERC)

Multi-scale tribological

mechanical and characterization

techniques for development of robust cold spray coati ngs

L. Cortelezzi

Natural Sciences and Discovery Grant Engineering Research

Modeling and control of shear flows over and within porous

Council

media

$22,000

2015-2019

$30,000

2015-2016

$90,000

2015-2018

$197,147

2014 -2017

$185,000

2017-2022

$120,000

2017-2022

(NSERC) S. Coulombe

MITACS

Development of twin-electrode electric arc furnace for resource recovery

S. Coulombe

Faculty of Engineering Gerald

Hatch

Faculty Not specified

Fellowship S. Omanovic (Principal Fonds de recherche du Équipe de recherche Investigator), S. Coulombe, G.Québec - Nature et

Conversion électrochimique du dioxyde de carbone en

Patience

hydrocarbures développement

technologies (FQRNT)

exploitables: de nouveaux

matériaux électrocatalytiques pour la cathode S. Couloumbe

NSERC

Discovery Grant

Plasma sources and processes for nanomaterial synthesis and reactive species production

S. Couloumbe

NSERC

Discovery

Accelerator Plasma sources and processes for

Supplement Grant

nanomaterial synthesis and reactive species production

G. Demopoulos Investigator)

(Principal Natural Sciences and Discovery Grant Engineering Research Council (NSERC)

G. Demopoulos Investigator),

Demopoulos

(Principal Hydro-QuĂŠbec Gauvin,

(Contract)

$724,150

2014-2016

$1,008,069

2014-2017

$487200

2014-2017

Recovery of Scandium

$90,000

2015-2017

Development of light-chargeable

$564,000

2017-2020

Collaborative Research Fabrication and characterization of and Development Grants Engineering Research Li2(Fe,Mn)SiO4 cathode materials (CRD) Council of Canada for new generation lithium-ion

DemopoulosNatural Sciences and

(PrincipalInvestigator), Brochu, R. Gauvin,

batteries Strategic Project Grant

M.Engineering Research N.Council of Canada

G.P. Demopoulos (Principal), R.NSERC

Solution-thermal processing of nanostructured kesterite absorber materials for

(NSERC)

G.P. DemopoulosMitacs with 5N Plus Inc (PrincipalInvestigator)

Gauvin

Fabrication and characterization of L2(Fe,Mn)SiO4 cathode materials for new-generation lithium-ion batteries

(NSERC)

Quitoriano

2011-2016

(Principal Natural Sciences and

Investigator), R. Gauvin

$205,000

ofCanada

Raynald(Co-Investigator)

Advanced environmental and energy material processing

sustainable cell manufacturing Accelerate Grant

Strategic Partnerships

lithium ion battery devices

A. Ehrlicher Investigator)

(Principal Natural Sciences and Discovery Grant Engineering Research Council (NSERC)

Canada Foundation for Leaders Innovation (CFI) Fund (LOF)

A. Ehrlicher

McGill University

2014-2019

$700,000

2014-2019

$50,000

2013-2016

$72,000

2014-2017

$12,600,000

2015-2020

for

$150,000

2015-2016

Towards a better understanding of trip satisfaction, behavior and

$120,000

2013-2017

Opportunity Active biological mechanics

Department

of N/A

Bioengineering Award

McGill

$150,000

Canada

A. Ehrlicher, A Hendricks

A. Ehrlicher

Regulated dissipation in active mechanobiology

University McGill

Support

Engineering N/A

Faculty of Engineering Doctoral Awards (MEDA) Jackie Vogel, A. Ehrlicher, EhabCanada Foundation for CFI round 8 Abouheif, Gary Brouhard,Innovation (CFI)

Integrated Quantitative Biosciences Initiative (IQBI)

Gonzalo Cosa, Hans Larsson, Paul Lasko, Stephen Michnick, Marlene

Oeffinger,

Rodrigo

Reyes Lamothe A. Ehrlicher, Showan Nazhat,National Science and Research Tools Dan Nicolau, Adam Hendricks,Engineering Research Instruments Luc Mongeau, Francois Council Barthelat, Rodrigo Reyes (NSERC)

and Bioengineering Facility Confocal Rheology

Canada

Lamothe, Christ Barrett, Jackie Vogel, Claire Brown A.

El-Geneidy

(Principal National Science and Discovery Grant Engineering Research

46 Investigator)

A. El-Geneidy

Council (NSERC)

Canada

needs among different groups of population over time.

Ville de Québec

Pour une compréhension des

meilleure différents

$18,480

2015-2016

$24,999

2015-2016

$23,100

2015-2016

$162,860

2013-2016

$105,000

2011-2016

types de cyclistes à Québec

A. El-Geneidy

Ville de Montreal

Portrait de l’accessibilité en transport durable de Montréal

R. Fischler

D. Frigon

Ville de Laval

Natural

Étude du "form-based code"

Science and Collaborative

Research Phylogenetic characterization of

Engineering Research and Development with the nitrifying populations in Council of Canada RégieAssainissement des municipal wastewaters and in (NSERC)

EauxBassinLaPrairie, Axor biological treatment systems for Experts Conseil, modelling &Hydromantis

D. Frigon

Natural

Science and Discovery Grant

Mixed-culture

biotechnologies

Engineering Research Council of Canada

producing storage compounds as biofuels and biomaterials:

(NSERC)

engineering waste communities

treatment

D. Frigon

MITACS

Accelerate with Liqudie Canada

Air Phylogenetic High-rate anaerobic digestion of ozonated waste activated sludge temperature.

D. Frigon (PI)

NSERC + Solutions Inc.

NSERC + Andritz OyD.G. Allen (PI), M. Bussmann, NSERC-Collaborative Enhancing dewatering, drying, Power Generation, H.N. Tran, Y.H.C Chin, E.A.Clyde Research and combustion and utilization of Bergemann Edwards, N. Basiliko, D. Frigon,Power Group, Domtar Development (CRD) pulp and paper mill biosludge Inc., Erco Worldwide, W. Wong Valmet Ltd, WestRock Corporation, AV Group NB Inc. D. Frigon (PI-CRD), J.F. LemayNSERC + Air Liquide NSERC-Combined (PI-ARD)

Canada

Collaborative

2016

$38,000

2017

$1,817,650

2017-2021

$1,033,258

2017-2020

$160,000

2016-2021

$35,000

2017

low

Linking the population structures of phosphateaccumulating organisms in wastewaters and treatment plants to enhance predictive abilities of bio-P removal process models.

InCTRL NSERC-Engage

$45,000

Anaerobic digestion of waste

Research activitated sludge at psychrophilic

and Development & temperatures with ozonation to Applied Research And reduce biosolids production and

D. Frigon

NSERC

Development

enhance energy recovery

Discovery Grant

New technologies for wastewater resource recovery by anoxigenic photoheterotrophic processes

J.F. Lemay (PI), A. Avalos NSERC Ramirez, D. Frigon

Engage Grant

biological

DĂŠveloppement dâ€™un proceed fiable pour le traitement de

48 matières fines de construction, renovation et démolition S. J. Gaskin Investigator)

(Principal Natural Sciences and Discovery Grant Engineering Research Council (NSERC)

Gaskin, S.J. (PI)

Canada

MITACS

Experimental hydraulics:

environmental entrainment and

$97,500

2011-2016

$15,000

2016-2017

$5,000

2016-2017

$17,1842

2015-2018

$180,000

2016-2021

$25,000

2016

mixing in turbulent flows

Accelerate

Aeration of hydraulic turbines for increased dissolved oxygen

Gaskin, S. (PI)

McGill

Internal Social Sciences Community Health Clubs and and Humanities inclusive Development Grant collaboration;

stakeholder widows and

engineering working together for reducing livelihood vulnerability with improved sanitation in the Lake Victoria Basin L.M Mydlarski, B.R. Balinga, S.J.Fonds de recherche du FQRNT Team Grant

La turbulence environmentale:

Gaskin

Applications au melange e naval de confluents fluviaux peu

Québec - Nature et technologies (FQRNT)

profonds,

aux

processus

oceaniquesbiogenes, et transport atmospherique

au et

evolution de brandons S. Gaskin

S. Gaskin

Natural Sciences and Discovery Grant Engineering Research

Experimental hydraulics:

environmental entrainment and

Council (NSERC)

mixing in turbulent flows

Natural Sciences and Engage Grant

Engine improvements to reduce

S. Gaskin

Engineering Research Council (NSERC)

NOx.

Natural Sciences and Engage Grant Engineering Research

Aeration of hydraulic turbines to increase downstream dissolved

Council (NSERC)

oxygen concentration

T Friscic (Principal Investigator),Natural Sciences and J Gostick, S Sun, V Vidal Engineering Research Council (NSERC)

Strategic

Readily scalable and efficient iron-based PEM fuel cell

Canada

$25,000

2016

$560,248

2015-2017

$153,000

2013-2016

$1,350,000

2012-2017

$105,000

2011-2016

electrocatalysts from low cost metal organic framework precursors

Wilkinson

(Principal Fonds de recherche du Team Grant

Detection and quantification of

Investigator), S. Ghoshal, N. QuĂŠbec - Nature et Tufenkji, Y. Comeau technologies (FQRNT)

C.J. Li(Principal Investigator), K.Natural Sciences and CREATE

engineered nanoparticles wastewater treatment plants

Auclair, T. Frisic, S. Ghoshal, S.Engineering Research Chemistry Maguire, A. Moores, P. Jessop,Council of Canada J. Nicell, Dahma. S. Ghoshal

Arndtsen,

Green NSERC

CREATE

Green

Chemistry

M.(NSERC)

Natural Sciences and Discovery Grant

Transport

Engineering Research Council of Canada

engineered iron nanoparticles in natural porous media

(NSERC)

and

reactivity

N. Tufenkji (Principal Fonds de recherche du Team Grant Investigator), S. Ghoshal, E.Québec - Nature et

Effets des conditions hivernales au Québec sur la virulence, la

Déziel, S. Dorner, P. Payment

survie et le transport des microorganismes pathogènes et

technologies (FQRNT)

$180,000

2014 – 2017

$147,587

2015-2016

$150,000

2015-2016

$225,300

2014-2017

$120,000

2016-2019

sur les risques associés aux eaux potables S.

Ghoshal

(Principal Natural Sciences and Research

Tools

Investigator), B. Lennox, J. Liu,Engineering Research Instruments A. Moores, N. Tufenkji, S. Suave Council of Canada

and A

Combustion

Ion

Chromatograph for Characterization of Nanoparticles

(NSERC)

and

Emerging

Halogenated

Pollutants N.

Tufenkji

(Principal Natural Sciences and Research

tools

and NanoTweezer-Raman System for

Investigator), K. J. Wilkinson, S. Engineering Research Instruments Giasson, S. Ghoshal, R. J. Hill, Council of Canada

Direct Single Identification

M. Tabrizian.

Characterization of Interaction

(NSERC)

Particle and

Forces N. Tufenkji Investigator), E.

(Principal Fonds de recherche du Team Grant Deziel, S.Québec - Nature et

Effect of winter temperatures in Quebec on virulence and

Dorner, S. Ghoshal, P. Payment. technologies (FQRNT)

transport of microorganisms

pathogenic and on

associated risks for drinking water. S. Ghoshal

Natural Sciences and Discovery

Accelerator Physical

Engineering Research Supplement Award Council (NSERC)

and

chemical

transformations of engineered nanoparticles: implications for environmental fate in aquatic environments,

S. Ghoshal

Natural Sciences and Discovery Grant Engineering Research

Physical and chemical transformations of engineered

Council (NSERC)

nanoparticles: implications for environmental fate in aquatic

$170,000

2016-2021

$746,366

2015-2018

$615,871

2015-2018

$147,587

2015-2016

$160,000

2015-2018

environments, S. Ghoshal (Principal Natural Sciences and Strategic Partnerships Promoting a Investigator), N. Tufenkji, K.Engineering Research Project Grant nanotechnology Wilkinson, N. Basu

Council (NSERC)

sustainable industry by

evaluating the environmental risks of nanoparticle release from nano-enhanced materials in the Canadian environment

J. Liu (Principal Investigator),Natural Sciences and Strategic S.Ghoshal, S. Suave

Partnerships Fluorochemicals

Engineering Research Project Grant Council (NSERC)

AFFF-

contaminated sites: environmental fate, toxicity and treatment

S. Ghoshal (Principal Natural Sciences and Research Tools Investigator), B. Lennox, J. Liu,Engineering Research Instruments A. Moores, N. Tufenkji, S.Council (NSERC) Suave

and A Combustion Chromatograph

Ion for

Characterization of Nanoparticles and Emerging Halogenated Pollutants

R. Galvez (Principal Natural Sciences and Collaborative Research Lac MĂŠgantic: strategic Investigator), S. Ghoshal, 6 Engineering Research and Development Grant assessment of the environmental others

Council (NSERC)

emergency, integrated cumulative impact assessment tools, transformation and transport of contaminants

T. Tosco, S. Fiore(Co-Prinicpal Politecnico di Torino Investigator), N. Tufenkji (CoPrinicpal Ghoshal N.

Investigator),

Tufenkji

Mobility Grant

Impact of Emerging Contaminants and Engineered Nanoparticles on

2016-2017

$150,000

2015-2016

$125,000

2016-2017

$17,000

2017

$120,000

2016-2019

$220,000

2016-2021

Water Quality

(Principal Natural Sciences and Research

Tools

and NanoTweezer-Raman System for

Investigator), S. Giasson, S.Engineering Research Instruments Ghoshal, R. Hill, M. Tabrizian, K.Council (NSERC)

Direct Single Identification

Wilkinson,

Characterization of Interaction Forces

S. Ghoshal

$75,000 (50,000â‚Ź)

Particle and

Natural Sciences and Idea to Innovation â€“ Phase Scale-up of a Novel Biphasic Engineering Research I Council (NSERC)

Process for the Degradation of Waste Chlorinated Solvents using Reactive Iron Nanoparticles

S. Ghoshal (principal), Bhattacharjya

S.McGill University

William and Rhea Seath Scale-up of a Novel Biphasic Awards in Engineering Process for the Degradation of Innovation

S. Ghoshal

Natural Sciences and Discovery

Waste Chlorinated Solvents using Reactive Iron Nanoparticles Accelerator Physical

Engineering Research Supplement Award Council (NSERC)

and

chemical

transformations of engineered nanoparticles: implications for environmental fate in aquatic environments

S. Ghoshal

Natural Sciences and Discovery Grant

Physical

and

chemical

Engineering Research Council (NSERC)

transformations of engineered nanoparticles: implications for environmental fate in aquatic

53 environments

M. Jemtrud (Principal Social Sciences and Insight (Research-Creation) Arts and ideas in motion Investigator), P. Hansen, S.Humanities Research Sinclair, A. Thain, P. Yachnin

Council (SSHRC)

M. Jemtrud

Natural Canada

M. Jemtrud

Société d’habitation du

Resources

2018 Solar competition

Decathlon

China

2018 Solar Decathlon

$493,000

2013-2016

$50,000

2017

$13,000

2017

$152,000

2015-2018

$130,000

2011-2016

$492,477

2011-2016

Québec

Ragogna

(Principal Natural Sciences and Collaborative

Investigator), A-M. Kietzig

A-M. Kietzig (Principal Natural Sciences and Discovery Grant Investigator) with 3 others Engineering Research Council (NSERC)

A-M.

Kietzig

Generation

anti

icing

Innovation (CFI)

Femtosecond laser micromachining of biomimetic surfaces for tribological and rheological applications

(Principal Canada Foundation for Infrastructure

Investigator) with 3 others

Research Next

Engineering Research and Development Grants technologies – addressing a Council (NSERC) (CRD) quintessential Canadian problem

Fund

Operating Laser laboratory for material processing and micromachining

A.-M. Kietzig

Natural Sciences and Engage Grant Engineering Research

Self-cleaning bathroom surfaces by femtosecond laser machining

$25,000

2015-2016

Natural Sciences and Engage Grant Engineering Research

Laser-micromachining of molds to fabricate easy-flow polymeric

$25,000

2016-2016

Council (NSERC)

surfaces $25,000

2017

$80,000

2016-2018

$190,000

2016-2021

$115,000

2014-2019

$90,000

2016-2018

Council (NSERC) A.-M. Kietzig

A.-M. Kietzig

NSERC

Engage Plus

Injection molding with lasermicromachined molds to fabricate easy-flow polymeric surfaces

A.-M. Kietzig

NSERC

Discovery Accelerator

Laser-assisted fabrication and stability of omniphobic surfaces

A.-M. Kietzig

NSERC

Discover

Laser-assisted fabrication and stability of omniphobic surfaces

Kopyscinski

Investigator)

(Principal Natural Sciences and Discovery Grant Engineering Research Council (NSERC)

Spatially-resolved

gas

concentration, surface species and temperature measurement for

heterogeneous

catalyzed

reactions using an optical accessible channel reactor. J. Kopyscinski

Fonds de recherche du FQRNT New Researcher QuĂŠbec - Nature et

Direct methane aromatization over GaN in a catalyti c membrane

technologies (FQRNT)

reactor.

J. Kopyscinski

MITACS

Accelerate

Evaluation and design of a novel CO 2 methanation reactor integrated into upgrading facility.

Mass Spectrometry for Advanced

Bergthorson, C.J. Li

Gas Analysis

Labeau

Investigator)

(Principal Natural Sciences and Industrial Research Chair Engineering Research Council of Canada (NSERC)/HydroQuĂŠbec

S. Affes (Principal Natural Sciences and CREATE Investigator), F. Labeau, PierreEngineering Research Council of Canada Boucher, Francois Gagnon, (NSERC) Ferhat Khendek, Martin Maier,

Interactive

2016-2017

$119,000

2017

$750,000

2015-2020

$1,366,150

2013-2019

$225,300

2014-2017

Biogas

J. Kopyscinski, S. Coulombe, J.Natural Sciences and RTI Engineering Research Council (NSERC)

$30,000

information

infrastructure for the power grid

Pervasive and smart wireless applications for the digital economy (PERSWADE)

and Ke Wu J. Liu (Principal Investigator),Fonds de recherche du Team Grant QuĂŠbec - Nature et S.Sauve technologies (FQRNT)

Persistent fluorinated chemicals from firefighting foams: environmental monitoring and risk assessment

J. Liu (Principal Investigator), S.Natural Sciences and Strategic Partnership Grant Fluorochemicals in AFFFEngineering Research Ghoshal, S. Sauve Contaminated Sites: Council (NSERC) Environmental Fate, Toxicity and Treatment

$615,871

2015-2018

X. Liu (Principal Investigator), Z.National Sciences and Strategic Grant Engineering Council of Mi, J. Song, and N. Pai Canada (NSERC)

Paper-Based Microfluidic Devi ces

$399,300

2014-2017

X. Liu

Development

$155,000

2012-2017

$147,534

2015-2017

$135,000

2013-2016

National Sciences and Discovery Grant Engineering Council of Canada (NSERC)

for Ultrasensitive Detection of Disease Markers

Paper-Based

Microfluidic Biosensors Medical Diagnostics

for

X. Liu (Principal Investigator), L.National Sciences and Research Tools and A SEM-Based Nanomanipulation Mongeau, F. Barthelat, Z. Mi, J.Engineering Council of Instruments (RTI) Grant System for Manipulation and Canada (NSERC) Song, FalehTamimi, Dongling Multiphysical Characterization of Ma, and Luca Razzari

Semiconductor, Metallic, Biological Nanomaterials

D. Ma (Principal Investigator),Fonds de recherche du Team Grant QuĂŠbec â€“ Nature et X. Liu, F. Vetron technologies (FRQNT)

Multifunctional Nanoparticles for Biomedical Applications: Earlier, Faster, Brighter, Powerful

and

X. Liu (Principal Investigator), L.National Sciences and Research Tools and Engineering Council of Mongeau, R. Mongrain, J. Dent, Instruments (RTI) Grant Canada (NSERC) M. Hendricks, R. Beech, and Y. Rao

A Multispectral Spatial Illumination System for Imaging

X. Liu

National Sciences and Engage Plus Grant Engineering Council of Canada (NSERC)

Optimization of multi-stage filtration processes for treating

Environment Canada

Specialized Water Testing for

X. Liu

N/A

$129,824

2014-2016

$25,000

2015-2016

$22,120

2016-2016

$2,196,557

2015-2016

$220,000

2016-2021

and Manipulation of Small Organisms and Soft Tissues

AFFF-contaminated water

Environment Canadaâ€™s PFC Treatment Technology Feasibility Study

Newson

(Principal Canada Foundation for Round 8- Project # 33263 Enhancing the Resilience and

Investigator), M. Meguid & 8 Innovation (CFI) others

Sustainability of Critical Geotechnical Infrastructures

A. Mahajan

Natural Sciences and Discovery Grant Engineering Research

Decentralized stochastic control: information structures,

Council (NSERC)

communication, and learning

A. Mahajan

Mahajan

Natural Sciences and Discovery Accelerator Engineering Research

Decentralized stochastic control: information structures,

Council (NSERC)

communication, and learning

(Prinicpal MITACS

Accelerate Cluster

Investigator), B.Champagne, I. Psaromiligkos

Ubiquitous

and

Secure

D2D

$12,000

2016-2019

$240,000

2016-2019

$155,000

2016-2021

$110,000.00

2012-2016

$395,558.00

2014-2018

communications for 5G Networks: New Challenges and Physical Layer Solutions

M. Meguid

B. Meyer

Natural Sciences and Discovery Grant

Performance Evaluation of Critical

Engineering Research Council (NSERC)

Geosystems Methods

Natural Sciences and Discovery Engineering Research Individual Council (NSERC)

Meyer

Canada

(Principal Canada Foundation for LOF

Investigator), A. Mahajan, H.Innovation (CFI) Zeng

Grant, Architecture Techniques

Using

Multiscale

and for

Automation Resilient

Computer Systems

Reliable

Embedded

and

Distributed System Optimization and Organization Technology (REBOOT) Lab

L. Miranda-Moreno (Principal Natural Sciences and Discovery Grant Investigator) Engineering Research

A multimodal framework for studying mobility and

Council (NSERC)

transportation safety in an urban network

Musmar

$17,000

2014-2019

and

$ 120,000

2015-2017

Dynamic Nanodevices Using Protein Molecular Motors

$160,000

2016-2021

Natural Sciences and Collaborative Research InP Modulators for Next Engineering Research and Development Grants Generation Coherent Fiber Optic

$288,000

2016-2018

$150,000

2016-2016

$120,000

2016-2021

Canada

(Principal Jordan

Investigator), F. Mucciardi and L. Tlili

D. Nicolau

Jordan Scientific Support Capture, Fund

Concentration

Conversion of Waste Heat

Natural Sciences and Discovery Grant Engineering Research Council (NSERC)

D.V. Plant

Council (NSERC)

(CRD)

D.V. Plant, L. Chen, and J.Natural Sciences and Research Azana Engineering Research Instruments

Omid M. Rouhani

Networks Tools

& Arbitrary Wave Form Generation for the Data

Council (NSERC)

Center Centric Internet

Natural Sciences and Discovery Grant Engineering Research

Design of Advanced Traveler General Information System

Council (NSERC)

Omid M. Rouhani

MITACS

A. P. Sasmito

McGill University (startup grant)

Hassani

Accelerate

(Principal Ultra-Deep

Mining 40%-Energy

Investigator), A.P. Sasmito, M.Network (UDMN) Ghomshei

Social welfare systems analysis of road capacity expansion options

$123,000

2017-2019

Mine Ventilation, Energy and Environment

$50,000

2014-2018

Determination of the acceptable

$786,000 (40%)

2014-2016

$125,000

2015-2019

$120,000

2015-2019

$309,420 (80%)

2015-2017

$65,000

2011-2016

geothermal resource from open loop systems in active and abandoned mines

A.P. Sasmito

Canada Foundation for John. R. Evans Leaders Energy efficient mine ventilation Innovation (CFI) Fund and total air-conditioning in underground mines

A.P. Sasmito

Natural Sciences and Discovery Grant

Development of Multiscale and

Engineering

Multiphysics Mathematical Model

Council (NSERC)

Research Canada

for Energy-Efficient ventilation

mine

A.P. Sasmito (Principal Ultra-Deep Mining 40%-Energy Investigator), F. Hassani, F.Network (UDMN)

Towards "freezing-on-demandâ€™ with closed loop mine-coupled

Mucciardi, A. Mujumdar

geothermal heating systems

A.P. S. Selvadurai (Principal Natural Sciences and Discovery Grant

Coupled

Investigator)

Engineering Research Council of Canada

environmental geomechanics: theoretical, computational and

processes

(NSERC)

experimental modelling

A.P.S. Selvadurai

Nuclear

Waste Research Grant

Management Organization A.P.S. Selvadurai

Nuclear

Selvadurai

Waste Research Grant

(Principal Natural Sciences and Research Tools

Subjected States

(Principal Fonds de recherché du FQRNT Team Grant

Environment Canada

Complex

2014-2017

$145,401

2015-2016

$211,998

2017-2019

$1,472,254

2017

$19,000

2015-2016

$1,645,366

2012 – 2018

Stress

Matériaux bi-dimensionnels postgraphène

John-Evans Fund

Leadership Vector magnet, regigerator and advanced engineering

N. Tufenkji

$480,000

for Characterizing Damage Evolution in Geomaterials

Investigator), G. Gervais, I.Québec – Nature et Garate technologies (FQRNT) T. Szkopek (Principal CFI Investigator), G. Gervais, Z. Mi

Geomechanical Characterization

Acoustic Emission Tomography

(NSERC)

Szkopek

2014-2017

of the Cobourg Limestone

Investigator), S. Ghoshal, G.Engineering Research Grassell Council of Canada

$480,000

properties of sedimentary rocks (Phase II)

Management Organization A.P.S.

Thermo-hydro-mechanical

Research Contract

dilution AFM for materials

A Test Guideline for Nanomaterial Leaching in Soils

N. Tufenkji, A. Athienitis, P. Natural Sciences and CREATE

Research and training via an

Pillay, F. Haghighat, M. Engineering Research Paraschivoiu, A. Chandra, D. Council of Canada

institute in water, energy and sustainability

Walsh, R. Chapuis, M. Gamal El - (NSERC) Din, D. Matthews

Tufenkji

Investigator)

(Principal Natural Sciences and Discovery Engineering Council (NSERC)

Grant

â€“ Multi-scale investigations of the

ResearchIndividual

environmental

Canada

$654,500

2014-2017

$500,000

2011-2016

$1,400,000

2016-2023

$15,000

2016-2017

$25,000

2016-2017

$117,515

2016-2017

fate and inhibitory effects of engineered nanoparticles Assessing the ecological risk of

N. Tufenkji, K. Wilkinson, J. Engineering Research Veinot Council of Canada

emerging developing

(NSERC)

SSHRC

2014â€“ 2019

transformation,

G. Goss (Principal Investigator), Natural Sciences and Strategic Grant

N. Tufenkji

$145,000

nanomaterialsa generalized

understanding based upon their physicochemical properties Canada Research Chairs

Tier II, Biocolloids and Surfaces in Environmental and Biomedical Sciences

N. Tufenkji

SSHRC

Canada Research Chairs

Tier I, Biocolloids and Surfaces in Environmental and Biomedical Sciences

N. Tufenkji (principal)

McGill University

William and Rhea Seath Maple syrup extract to reduce Award

N. Tufenkji (principal)

Natural Sciences andEngagae Grant Engineering Research

antibiotic usage.

Maple derivative antibiotic usage.

reduce

Council (NSERC) N. Tufenkji (principal), B. Natural Sciences and Research Tools Lennox, R. J. Hill, M. Cerruti, C. Engineering ResearchInstruments Hoesli.

Council (NSERC)

and A Langmuir-Blodgett System with Brewster Angle Microscopy and Surface Potential Sensing for Multifunctional and Advanced

63 Materials

K. Wilkinson (principal), N. Natural Sciences and Research Tools Tufenkji, S. Sauve, P. Hayes, P. Engineering ResearchInstruments Chaurand.

Council (NSERC)

and Quantification and mapping of metals in solid phases using laser ablation/laser

$150,000

2016-2017

$150,000

2015-2016

$147,587

2015-2016

$376,460

2015-2017

$19,000

2015-2016

induced

breakdown spectroscopy N. Tufenkji (principal), K. J. Natural Sciences and Research Tools Wilkinson, S. Giasson, S. Engineering ResearchInstruments Ghoshal, R. J. Hill, M. Tabrizian. Council (NSERC)

and NanoTweezer-Raman System for Direct Single Particle Identification and Characterization of Interaction Forces

Ghoshal

(principal),

N. Natural Sciences and Research

Tufenkji, S. SauvĂŠ, B. Lennox, J. Engineering ResearchInstruments Liu, A. Moores. Council (NSERC)

Tools

and A

Combustion

Chromatograph for Characterization of Nanoparticles and Emerging Pollutants

N. Tufenkji

Ocean

Spray

Cranberries

Ion

Investigating

the

Halogenated

Role

Cranberry in Mitigating Antibiotic Resistance of Uropathogenic Bacteria

N. Tufenkji

Environment Canada

A Test Guideline for Nanomaterial Leaching in Soils

C. Hoesli (principal), N. Tufenkji St-Gobain Ceramics and

Xiaozhe Wang (PI)

K. Waters

Effects of Fluoropolymer Surface

Plastics

Properties on Monocyte Cell Fate

Natural Sciences and Discovery Grant Engineering Research

Impacts of Renewable Energy of Transient and Voltage Stability of

Council (NSERC)

Electric Power Systems

Canada

Natural Sciences and Discovery Engineering Research

$261,800

2014-2016

$31,000

2016-2021

The fundamentals of rare earth $100,000 flotation with ionic liquid collectors

2014-2019

Can Cities Save the Planet? The $50,166 Politics of the Sustainable "Smart

2016-2019

Council (NSERC) D. Wachsmuth

Fonds SociĂŠtĂŠ et culture (FRQSC)

City" D. Wachsmuth

SSHRC

Canada Research Chairs Canada Research Chair (Tier II) in $500,000

2017-2022

Urban Governance D. Wachsmuth

McGill University

Internal SSH Emerging The Social Costs of High Housing $10,000 Scholars Accelerator Prices: conflict and Crisis in the

2017

Vancouver Housing Market V.

Yargeau

(Principal Natural Sciences and Collaborative

Investigator), C. Metcalfe

Research Development

novel

Engineering ResearchDevelopment Grant (CRD) ozonation system at pilot scale for Council of Canada wastewater disinfection and (NSERC)

removal of contaminants emerging concern

$624,700

2014-2017

Chris Metcalfe (PI), V. Yargeau NSERC

NSERC Strategic Project

Wastewater

small,

rural

$478,800

2016-2019

$120,000

2013-2017

communities: Integrated sewage lagoon and ozone treatment

Y. Zhao (Principal Investigator) Natural Sciences and Discovery Grant Engineering Research Council of Canada (NSERC)

Research assessment processes

sustainability

manufacturing

APPENDIX C: TISED MEMBERS’ PUBLICATIONS These are the publications relating to sustainability published by our TISED members between May 1, 2016 - April 30, 2017. Sources include: Google Scholar, Web of Science, and members self -reporting. Publications are listed alphabetically by members’ last name. D. M. Chen, B. Tucker, M. G. Badami, N. Ramankutty, and J. M. Rhemtulla, “A multi -dimensional metric for facilitating sustainable food choices in campus cafeterias,” Journal of Cleaner Production, vol. 135, pp. 1351– 1362, 2016. S. E. Harding, M. G. Badami, C. C. Reynolds, and M. Kandlikar, “Auto-rickshaws in Indian cities: Public perceptions and operational realities,” Transport policy, vol. 52, pp. 143–152, 2016. D. Verbich, M. G. Badami, and A. M. El-Geneidy, “Bang for the buck: Toward a rapid assessment of urban public transit from multiple perspectives in North America,” Transport Policy, vol. 55, pp. 51–61, 2017. D. van Lierop, M. G. Badami, and A. El-Geneidy, “Nothing But a Good Ride: The Influences of Satisfaction and Loyalty in Public Transport,” 2017. D. van Lierop, M. G. Badami, and A. M. El-Geneidy, “What influences satisfaction and loyalty in public transport? A review of the literature,” Transport Reviews, vol. 0, no. 0, pp. 1–21, Mar. 2017. D. Verbich, M. G. Badami, and A. M. El-Geneidy, “You Can’t Always Get What You Pay for: Towa rd a Rapid Assessment of Public Transit from Multiple Perspectives in North American Cities,” 2017. M. M. Porter, N. Ravikumar, F. Barthelat, and R. Martini, “3D-printing and mechanics of bio-inspired articulated and multi-material structures,” Journal of the Mechanical Behavior of Biomedical Materials, 2016. R. Martini, Y. Balit, and F. Barthelat, “A comparative study of bio-inspired protective scales using 3D printing and mechanical testing,” Acta Biomaterialia, 2017. M. Mirkhalaf, J. Tanguay, and F. Barthelat, “Carving 3D architectures within glass: Exploring new strategies to transform the mechanics and performance of materials,” Extreme Mechanics Letters, vol. 7, pp. 104–113, 2016. M. Mirkhalaf and F. Barthelat, “Design, 3D printing and testing of archi tectured materials with bistable interlocks,” Extreme Mechanics Letters, vol. 11, pp. 1–7, 2017. M. Mirkhalaf and F. Barthelat, “Extreme Mechanics Letters,” 2016. A. Hart, E. J. Harvey, R. Rabiei, F. Barthelat, and P. A. Martineau, “Fixation strength of four headless compression screws,” Medical Engineering & Physics, vol. 38, no. 10, pp. 1037–1043, 2016. F. Barthelat, “Growing a synthetic mollusk shell,” Science, vol. 354, no. 6308, pp. 32–33, 2016. T. Siegmund, F. Barthelat, R. Cipra, E. Habtour, and J. Riddick, “Manufacture and Mechanics of Topologically Interlocked Material Assemblies,” Applied Mechanics Reviews, vol. 68, no. 4, p. 40803, 2016. L. Szewciw and F. Barthelat, “Mechanical properties of striped bass fish skin: Evidence of an exotendon functio n of the stratum compactum,” Journal of the Mechanical Behavior of Biomedical Materials, 2016.

R. Martini and F. Barthelat, “Stability of hard plates on soft substrates and application to the design of bioinspired segmented armor,” Journal of the Mechanics and Physics of Solids, vol. 92, pp. 195–209, 2016. R. Martini and F. Barthelat, “Stretch-and-release fabrication, testing and optimization of a flexible ceramic armor inspired from fish scales,” Bioinspiration & Biomimetics, vol. 11, no. 6, p. 66001, 2016. I. A. Malik and F. Barthelat, “Toughening of thin ceramic plates using bioinspired surface patterns,” International Journal of Solids and Structures, vol. 97, pp. 389–399, 2016. P. D. G. Maqueo, P. Versailles, G. Bourque, and J. M. Bergthorson, “A Numerical Study on the Reactivity of Biogas/Reformed-Gas/Air and Methane/Reformed-Gas/Air Mixtures at Gas Turbine Relevant Conditions,” in ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition , 2016, p. V003T03A005– V003T03A005. S. E. Jella, J. M. Bergthorson, P. Q. Gauthier, and G. Bourque, “CFD Modeling of Equivalence Ratio Effects on a Pressurized Turbulent Premixed Flame,” in ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, 2016, p. V04BT04A054–V04BT04A054. M. Schiemann, P. Fischer, J. Bergthorson, G. Schmid, and D. Taroata, “Combustion of Lithium Particles in N2 — Reaction Rates,” Combustion Science and Technology, vol. 189, no. 1, pp. 169–186, 2017. J. M. Bergthorson, P. Julien, S. Goroshin, and D. L. Frost, “Comments on:‘Combustion of nano-sized aluminum particles in steam: Numerical modeling’, by VB Storozhev and AN Yermakov,” Combustion and Flame, vol. 171, pp. 262–263, 2016. G. P. Gauthier and J. M. Bergthorson, “Effect of external heat loss on the propagation and quenching of flames in small heat-recirculating tubes,” Combustion and Flame, vol. 173, pp. 27–38, 2016. P. Julien and J. M. Bergthorson, “Enabling the metal fuel economy: green recycling of metal fuels,” Sustainable Energy & Fuels, 2017. C. R. L. Bauwens, J. M. Bergthorson, and S. B. Dorofeev, “Experimental investigation of spherical -flame acceleration in lean hydrogen-air mixtures,” International Journal of Hydrogen Energy, vol. 42, no. 11, pp. 7691– 7697, 2017. M. D. Evans, J. M. Bergthorson, and S. Coulombe, “High-Voltage, High-Frequency Pulse Generator for Nonequilibrium Plasma Generation and Combustion Enhancement,” IEEE Transactions on Plasma Science, vol. 44, no. 10, pp. 2429–2437, 2016. J. M. Bergthorson et al., “Metal-water combustion for clean propulsion and power generation,” Applied Energy, vol. 186, pp. 13–27, 2017. G. M. Watson, P. Versailles, and J. M. Bergthorson, “NO formation in premixed flames of C 1–C 3 alkanes and alcohols,” Combustion and Flame, vol. 169, pp. 242–260, 2016. A. C. Lipardi, J. M. Bergthorson, and G. Bourque, “NOx Emissions Modeling and Uncertainty From Exhaust-GasDiluted Flames,” Journal of Engineering for Gas Turbines and Power, vol. 138, no. 5, p. 51506, 2016.

M. D. G. Evans, J. M. Bergthorson, and S. Coulombe, “Plasma assisted combustion of lean premixed flames: Highspeed imaging of streamer and flame dynamics,” in Plasma Science (ICOPS), 2016 IEEE International Conference on, 2016, pp. 1–1. K. H. Bevan, “Electron transfer from the perspective of electron transmission: Biased non-adiabatic intermolecular reactions in the single-particle picture,” Journal of Chemical Physics, vol. 146, no. 13, 2017. K. H. Bevan, M. S. Hossain, A. Iqbal, and Z. Wang, “Exploring Bridges between Quantum Transport and Electrochemistry. I.,” JOURNAL OF PHYSICAL CHEMISTRY C, vol. 120, no. 1, pp. 179–187, Jan. 2016. M. S. Hossain, A. Iqbal, and K. H. Bevan, “Interfacial Screening in Ultrafast Voltammetry: A Theoretical Study of Redox-Active Monolayers,” Analytical Chemistry, vol. 88, no. 18, pp. 9062–9070, 2016. A. Iqbal, M. S. Hossain, and K. H. Bevan, “The role of relative rate constants in determining surface state phenomena at semiconductor-liquid interfaces,” Phys. Chem. Chem. Phys., vol. 18, no. 42, pp. 29466–29477, Nov. 2016. R. Lazarovic, D. Paton, and L. Bornstein, “Approaches to workforce housing in London and Chicago: from targeted sectors to income-based eligibility,” Housing Studies, vol. 31, no. 6, pp. 651–671, 2016. A. Abiri-Jahromi and F. Bouffard, “Contingency-type reserve leveraged through aggregated thermostaticallycontrolled loads—Part I: Characterization and control,” IEEE Transactions on Power Systems, vol. 31, no. 3, pp. 1972–1980, 2016. A. Abiri-Jahromi and F. Bouffard, “Contingency-type reserve leveraged through aggregated thermostaticallycontrolled loads—Part II: Case studies,” IEEE Transactions on Power Systems, vol. 31, no. 3, pp. 1981–1989, 2016. H. Nosair and F. Bouffard, “Energy-Centric Flexibility Management<? Pub _newline?> in Power Systems,” IEEE Transactions on Power Systems, vol. 31, no. 6, pp. 5071–5081, 2016. M. Ross, C. Abbey, F. Bouffard, and G. Joos, “Microgrid Economic Dispatch with Energy Storage Systems,” IEEE Transactions on Smart Grid, 2016. A. A. Jahromi and F. Bouffard, “On the loadability sets of power systems—Part I: Characterization,” IEEE Transactions on Power Systems, vol. 32, no. 1, pp. 137–145, 2017. A. Abiri-Jahromi and F. Bouffard, “On the Loadability Sets of Power Systems —Part II: Minimal Representations,” IEEE Transactions on Power Systems, vol. 32, no. 1, pp. 146–156, 2017. A. Najmabadi, K. Humphries, B. Boulet, and T. Rahman, “Battery voltage optimization of a variable DC bus voltage control powertrain for medium duty delivery trucks for various drive cycles,” in Transportation Electrification Conference and Expo (ITEC), 2016 IEEE, 2016, pp. 1–6. M. S. R. Mousavi, H. V. Alizadeh, and B. Boulet, “Estimation of Synchromesh Frictional Torque and Output Torque in a Clutchless Automated Manual Transmission of a Parallel Hybrid Electric Vehicle,” IEEE Transactions on Vehicular Technology, 2016.

M. S. R. Mousavi and B. Boulet, “Estimation of the State Variables and Unknown Input of a Two-Speed Electric Vehicle Driveline Using Fading-Memory Kalman Filter,” IEEE Transactions on Transportation Electrification, vol. 2, no. 2, pp. 210–220, 2016. D. Wu, H. Zeng, C. Lu, and B. Boulet, “Two-Stage Energy Management for Office Buildings With Workplace EV Charging and Renewable Energy,” IEEE Transactions on Transportation Electrification, vol. 3, no. 1, pp. 225–237, 2017. N. Alatawneh, T. Rahman, S. Hussain, D. A. Lowther, and R. Chromik, “Accuracy of time domain extension formulae of core losses in non-oriented electrical steel laminations under non-sinusoidal excitation,” IET Electric Power Applications, 2017. S. A. Alidokht, P. Manimunda, P. Vo, S. Yue, and R. R. Chromik, “Cold spray deposition of a Ni -WC composite coating and its dry sliding wear behavior,” Surface and Coatings Technology, vol. 308, pp. 424–434, 2016. P. Stoyanov, J. M. Shockley, M. Dienwiebel , and R. R. Chromik, “Combining in situ and online approaches to monitor interfacial processes in lubricated sliding contacts,” MRS Communications, vol. 6, no. 3, pp. 301–308, 2016. P. Behera, K. R. Sriraman, R. R. Chromik, and S. Yue, “Combining in situ tribometry and triboscopy to understand third body behavior of a Cd coating,” Surface Topography: Metrology and Properties, vol. 5, no. 1, p. 14001, 2017. S. Hamidizadeh, N. Alatawneh, R. R. Chromik, and D. A. Lowther, “Comparison of different demagnetizati on models of permanent magnet in machines for electric vehicle application,” IEEE Transactions on Magnetics, vol. 52, no. 5, pp. 1–4, 2016. A. Saleem, N. Alatawneh, R. R. Chromik, and D. A. Lowther, “Effect of Shear Cutting on Microstructure and Magnetic Properties of Non-Oriented Electrical Steel,” IEEE Transactions on Magnetics, vol. 52, no. 5, pp. 1–4, 2016. L. Lee, P. Behera, K. R. Sriraman, and R. R. Chromik, “Effects of humidity on the sliding wear properties of Zn–Ni alloy coatings,” RSC Advances, vol. 7, no. 37, pp. 22662–22671, 2017. A. Ghosh, J. Arreguin-Zavala, H. Aydin, D. Goldbaum, R. Chromik, and M. Brochu, “Investigating cube-corner indentation hardness and strength relationship under quasi -static and dynamic testing regimes,” Materials Science and Engineering: A, vol. 677, pp. 534–539, 2016. M. Gallaugher, Y. Ding, P. Ghosh, and R. R. Chromik, “Local Scale Microstructural Effects from the Deformation and Recrystallization of Non-Oriented Electrical Steels,” Metallurgical and Materials Transactions E, vol. 3, no. 4, pp. 250–263, 2016. A. A. Samimi, T. W. Krause, L. Clapham, M. Gallaugher, Y. Ding, and R. Chromik, “Manufacturing Inspection of Electrical Steels using Magnetic Barkhausen Noise: Residual Stress Detection,” CINDE Journal, vol. 37, no. 5, 2016. G. Kermouche, G. Jacquet, C. Courbon, J. Rech, Y. Y. Zhang, and R. Chromik, “Microstructure Evolution Induced by Sliding-Based Surface Thermomechanical Treatments -Application to Pure Copper,” in Materials Science Forum, 2017, vol. 879, pp. 915–920.

J. M. Shockley, C. Desrayaud, R. R. Chromik, and S. Descartes, “Significance of Al 2 O 3 particle morphology in the microstructure evolution of cold-sprayed Al-Al 2 O 3 during unconstrained high-pressure torsion,” Materials Science and Engineering: A, vol. 684, pp. 510–516, 2017. H. Mahjoubi. E. Buck, P. Manimuda, R. Farivar, R. R. Chromik, M. Murshed, and M. Ceruti , “Surface phosphonation enhances hydroxyapatite coating adhesion on polyetheretherketone and its osseointegration potential,” Acta Biomaterialia, vol. 47, pp. 149–158, 2017. P. Behera, K. R. Sriraman, R. R. Chromik, and S. Yue, “Surface Topography: Metrology and Properties,” SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, vol. 5, no. 1, 2017. L. Cortelezzi, S. Ferrari, and G. Dubini, “A scalable active micro-mixer for biomedical applications,” Microfluidics and Nanofluidics, vol. 21, no. 3, p. 31, 2017. L. Cortelezzi, S. Ferrari, and A. Dubini, “A scalable micro-mixer for biomedical applications,” in APS Meeting Abstracts, 2016. T. Shoji, A. Besnard, E. Harris, R. M’closkey, A. Karagozian, and L. Cortelezzi, “Structural and mixing characteristics in actively controlled transverse jets,” in APS Meeting Abstracts, 2016. M. A. McArthur, N. Ullah, S. Coulombe, and S. Omanovic, “A binder-free Ir0. 4Ru0. 6-oxide/functionalized multi walled carbon nanotube electrode for possible applications in supercapacitors,” The Canadian Journal of Chemical Engineering, 2017. A. Smolyakov, R. Fedosejevs, and S. Coulombe, “Guest Editorial Special Issue on Invited and Tutorial Papers From ICOPS 2016,” IEEE Transactions on Plasma Science, vol. 45, no. 4, pp. 525–526, 2017. D. Burkat, F. Aristizabal, and S. Coulombe, “High-speed imaging and electrical diagnostics of interacting arcs in dual-cathode electric arc furnace,” i n Plasma Science (ICOPS), 2016 IEEE International Conference on, 2016, pp. 1– 1. M. D. G. Evans, J. M. Berthorson, and S. Coulombe, “High-voltage, high repetition rate nanosecond pulse generator for high-pressure non-thermal plasma generation,” in Plasma Science (ICOPS), 2016 IEEE International Conference on, 2016, pp. 1–1. J. Ivall, J.-S. Renault-Crispo, S. Coulombe, and P. Servio, “Ice-dependent liquid-phase convective cells during the melting of frozen sessile droplets containing water and multiwall carbon nanotubes,” International Journal of Heat and Mass Transfer, vol. 101, pp. 27–37, 2016. L. Jorge, P.-L. Girard-Lauriault, and S. Coulombe, “pH-reversible destabilization-dispersion of MWCNTs coated with functional plasma polymer films in water,” Plasma Processes and Polymers, 2017. C. Bruel, R. Laraque, S. Omanovic, S. Coulombe, and G. S. Patience, “Pt thin film transient mobility over yttria stabilized zirconia,” Thin Solid Films, vol. 626, pp. 17–24, 2017. J. Ivall, G. Langlois-Rahme, S. Coulombe, and P. Servio, “Quantitative stability analyses of multiwall carbon nanotube nanofluids following water/ice phase change cycling,” Nanotechnology, vol. 28, no. 5, p. 55702, 2016.

A. Karthikeyan, S. Coulombe, and A. M. Kietzig, “Wetting behavior of multi -walled carbon nanotube nanofluids,” Nanotechnology, vol. 28, no. 10, p. 105706, 2017. H.-C. Chiu, L. Xia, J. Zhou, L. Gu, J. Reid, R. Gauvin, K. Zaghib, G. P. Demopoulos, “Annealing-regulated elimination of residual strain-induced structural relaxation for stable high-power Li 4 Ti 5 O 12 nanosheet anodes,” Nano Energy, 2017. R. S. Multani, T. Feldmann, and G. P. Demopoulos, “Antimony in the metallurgical industry: A review of its chemistry and environmental stabilization options,” Hydrometallurgy, vol. 164, pp. 141–153, 2016. H.-C. Chiu, L. Xia, J. Zhou, L. Gu, J. Reid, R. Gauvin, K. Zaghib, G. P. Demopoulos, “Capacity fade mechanism of Li4Ti5O12 nanosheet anode,” Advanced Energy Materials, vol. 7, no. 5, 2017. X. Lu, H.-C. Chiu, K. H. Bevan, D.-T. Jiang, K. Zaghib, and G. P. Demopoulos, “Density functional theory insights into the structural stability and Li diffusion properties of monoclinic and orthorhombic Li 2 FeSiO 4 cathodes,” Journal of Power Sources, vol. 318, pp. 136–145, 2016. F. Voisard, H. Demers, M. Trudeau, G. P. Demopoulos, R. Gauvin, and K. Zaghib, “Electron Dose Management for High Angle Annular Dark Field Scanning Transmission Electron Microscope Tomography of Beam Sensitive Materials,” Microscopy and Microanalysis, vol. 22, no. S3, pp. 1294–1295, 2016. A. Paolella, G. P. Demopoulos, and K. Zaghib, “Evolution of Fe-Antisite Defects in Standard Hydrothermal LiFePO4 Synthesis and Their Accelerated Removal with Ca2+,” in Meeting Abstracts, 2016, pp. 1–1. H.-C. Chiu, X. Lu, S. Elouatik, K. Zaghib, and G. P. Demopoulos, “Formation of Lithium Titanate Hydrate Nanosheets: Insight into a Two-Dimension Growth Mechanism by in Situ Raman,” Crystal Growth & Design, vol. 16, no. 7, pp. 3898–3904, 2016. Z. N. Arthur, H.-C. Chiu, X. Lu, N. Chen, V. Emond, G. P. Demopoulos, D.-T. Jiang, “In Operando XANES & XRD Investigation into the Rate-Dependent Transport Properties of Lithium Iron Silicate Cathodes,” MRS Advances, vol. 2, no. 7, pp. 419–424, 2017. Z. N. Arthur, H.-C. Chiu, X. Lu, N. Chen, V. Emond, G. P. Demopoulos, D.-T. Jiang., “In situ XANES & XRD Study of interphasial reaction between uncharged Li2FeSiO4 cathode and LiPF6 -based electrolyte,” in Journal of Physics: Conference Series, 2016, vol. 712, p. 12124. H.-C. Chiu, X. Lu, and G. P. Demopoulos, “Li4Ti5O12 Degradation Kinetics during Galvanostatic Cycling,” in Meeting Abstracts, 2016, pp. 530–530. G. Demopoulos, “Li 4 Ti 5 O 12 Degradation Kinetics during Galvanostatic Cycling,” in 18th International Meeting on Lithium Batteries (June 19-24, 2016), 2016. A. Paolella, C. Faure, G. P. Demopoulos, and K. Zaghib, “Light-Assisted Delithiation of Nano-LiFePO4 for PhotoRechargeable Li-Ion Batteries,” in Meeting Abstracts, 2016, pp. 268–268. X. Lu, H.-C. Chiu, Z. Arthur, J. Zhou, J. Wang, N. Chen, D.-T. Jiang, K. Zaghib, G. P. Demopoulos, “Li-ion storage dynamics in metastable nanostructured Li 2 FeSiO 4 cathode: Antisite-induced phase transition and lattice oxygen participation,” Journal of Power Sources, vol. 329, pp. 355–363, 2016.

R. Gauvin, N. Brodusch, H. Demers, G. P. Demopoulos, and K. Zaghib, “Lithium Detection in the Electron Microscope,” in Meeting Abstracts, 2016, pp. 203–203. Z. Wang and G. P. Demopoulos, “Nanoscale Photo-Absorbing Kesterite Grown on Anatase Mesoscopic Films by Sequential Binary Chalcogenide Solution Deposition-Exchange, Annealing, and Etching,” Crystal Growth & Design, vol. 16, no. 7, pp. 3618–3630, 2016. Z. Wang, R. Gauvin, and G. Demopoulos, “Nanostructural and Photo-electrochemical Properties of Solution Spincoated Cu 2 ZnSnS 4-TiO 2 Nanorod Forest Films with Improved Photovoltaic Performance,” Nanoscale, 2017. G. Demopoulos, “Reporting on the Unusual Electrochemical Performance of the Low Temperature Orthorhombic Phase of Lithium Iron Silicate,” in 18th International Meeting on Lithium Batteries (June 19-24, 2016), 2016. G. Demopoulos, “Solid-Solution Vs. Two-Phase Li-Ion Storage in Nanograined Orthosilicate Cathode Materials,” in PRiME 2016/230th ECS Meeting (October 2-7, 2016), 2016. X. Lu, H.-C. Chiu, Z. Arthur, J. Zhou, J. Wang, N. Chen, D.-T. Jiang, K. Zaghib, G. P. Demopoulos, “Solid-Solution Vs. Two-Phase Li-Ion Storage in Nanograined Orthosilicate Cathode Materials,” in Meeting Abstracts, 2016, pp. 257– 257. J. J. Mahoney, M. T. Bohan, and G. P. Demopoulos, “Solubility product constants for the calcium ferric arsenate mineral, Yukonite: Fitting possible formulas with PhreePlot,” in Arsenic Research and Global Sustainability: Proceedings of the Sixth International Congress on Arsenic in the Environment (As2016), June 19 -23, 2016, Stockholm, Sweden, 2016, p. 137. C. Doerfelt, T. Feldmann, R. Roy, and G. P. Demopoulos, “Stability of arsenate-bearing Fe (III)/Al (III) coprecipitates in the presence of sulfide as reducing agent under anoxic conditions,” Chemosphere, vol. 151, pp. 318–323, 2016. A. Yasin, F. Guo, M. J. Sussman, R. Gauvin, and G. P. Demopoulos, “Steady-State, Scalable Production of Mesoporous Rutile and Brookite Particles and Their Use in Energy Conversion and Storage Cells,” ChemNanoMat, vol. 2, no. 10, pp. 980–988, 2016. G. Demopoulos, “Structural View of Li Ion and Electron Correlation in Li 2 FeSiO 4 Cathode,” in 18th International Meeting on Lithium Batteries (June 19-24, 2016), 2016. X. Lu, H.-C. Chiu, Z. Arthur, H. Wei, J. Zhou, J. Wang, N. Chen, D.-T. Jiang, K. Zaghib, G. P. Demopoulos, “Structural View of Li Ion and Electron Correlation in Li2FeSiO4 Cathode,” in Meeting Abstracts, 2016, pp. 81–81. N. Yissachar, A. Erhlicher et al., “An Intestinal organ culture system uncovers a role for the nervous system in microbe-immune crosstalk,” Cell, vol. 168, no. 6, pp. 1135–1148, 2017. A. Khavari, M. Nydén, D. A. Weitz, and A. J. Ehrlicher, “Composite alginate gels for tunable cellular microenvironment mechanics,” Scientific Reports, vol. 6, 2016. D. van Lierop and A. El-Geneidy, “A New Market Segmentation Approach: Evidence from Two Canadian Cities,” Journal of Public Transportation, vol. 20, no. 1, p. 2, 2017.

D. van Lierop, M. Bebronne, and A. El-Geneidy, “Bicycle Education for Children: Evaluation of a Program in Montreal, Quebec, Canada,” Transportation Research Record: Journal of the Transportation Research Board , no. 2587, pp. 23–33, 2016. A. El-Geneidy, D. van Lierop, and R. Wasfi, “Bike sharing schemes can have a positive impact on nearby house prices.,” USApp–American Politics and Policy Blog, 2016. L. Fordham, D. van Lierop, and A. El-Geneidy, “Can’t Get No Satisfaction: Examining the Relationship between Commuting and Overall Life Satisfaction,” 2017. M. Langlois, R. A. Wasfi, N. A. Ross, and A. M. El-Geneidy, “Can transit-oriented developments help achieve the recommended weekly level of physical activity?,” Journal of Transport & Health, vol. 3, no. 2, pp. 181–190, 2016. A. El-Geneidy, D. van Lierop, and R. Wasfi, “Do people value bicycle sharing? A multilevel lo ngitudinal analysis capturing the impact of bicycle sharing on residential sales in Montreal, Canada,” Transport Policy, vol. 51, pp. 174–181, 2016. D. van Lierop and A. El-Geneidy, “Enjoying loyalty: The relationship between service quality, customer satisfaction, and behavioral intentions in public transit,” Research in Transportation Economics, vol. 59, pp. 50–59, 2016. E. Grisé and A. El-Geneidy, “Evaluating the relationship between socially (dis) advantaged neighbourhoods and customer satisfaction of bus service in London, UK,” Journal of Transport Geography, vol. 58, pp. 166–175, 2017. D. Verbich, E. Diab, and A. El-Geneidy, “Have they bunched yet? An exploratory study of the impacts of bus bunching on dwell and running times,” Public Transport, vol. 8, no. 2, pp. 225–242, 2016. G. Boisjoly and A. M. El-Geneidy, “How to get there? A critical assessment of accessibility objectives and indicators in metropolitan transportation plans,” Transport Policy, vol. 55, pp. 38–50, 2017. E. Grisé and A. El-Geneidy, “Identifying the bias: Evaluating the effectiveness of automatic data collection 2 methods in estimating the details of bus dwell time 3,” 2017. C. Loong and A. El-Geneidy, “It’sa Matter of Time: Assessment of Additional Time Budgeted for Commuting to McGill University Across Modes,” Transportation Research Record: Journal of the Transportation Research Board , no. 2565, pp. 94–102, 2016. M. S. Wexler and A. M. El-Geneidy, “Keep ‘Em Separated: Desire Lines Analysis of Bidirectional Cycle Tracks in Montreal, Canada,” 2017. A. El-Geneidy, R. Buliung, E. Diab, D. van Lierop, M. Langlois, and A. Legrain, “Non-stop equity: Assessing daily intersections between transit accessibility and social disparity across the Greater Toronto and Hamilton Area (GTHA),” Environment and Planning B: Planning and Design, vol. 43, no. 3, pp. 540–560, 2016. C. Loong, D. van Lierop, and A. El-Geneidy, “On time and ready to go: An analysis of commuters’ punctuality and energy levels at work or school,” Transportation research part F: traffic psychology and behaviour, vol. 45, pp. 1– 13, 2017.

D. van Lierop and A. El-Geneidy, “Perceived Reality: Understanding the relationship between customer perceptions and operational characteristics,” 2017. C. Stewart, E. Diab, R. Bertini, and A. El-Geneidy, “Perspectives on transit: Potential benefits of visualizing transit data,” Transportation Research Record: Journal of the Transportation Research Board , no. 2544, pp. 90–101, 2016. D. van Lierop and A. El-Geneidy, “Public Image: Determining the Effects of Users’ Image of Public Transit on Loyalty,” 2017. D. Verbich and A. El-Geneidy, “Public transit fare structure and social vulnerability in Montreal, Canada,” Transportation Research Part A: Policy and Practice, vol. 96, pp. 43–53, 2017. E. Diab, D. van Lierop, and A. El-Geneidy, “Recommending transit: Disentangling users’ willingness to recommend transit and their intended continued use,” Travel Behaviour and Society, vol. 6, pp. 1–9, 2017. E. Flanagan, U. Lachapelle, and A. El-Geneidy, “Riding tandem: Does cycling infrastructure investment mirror gentrification and privilege in Portland, OR and Chicago, IL?,” Research in Transportation Economics, 2016. D. van Lierop, K. Maat, and A. El-Geneidy, “Talking TOD: learning about transit-oriented development in the United States, Canada, and the Netherlands,” Journal of Urbanism: International Research on Placemaking and Urban Sustainability, vol. 10, no. 1, pp. 49–62, 2017. A. El-Geneidy, D. Levinson, E. Diab, G. Boisjoly, D. Verbich, and C. Loong, “The cos t of equity: Assessing transit accessibility and social disparity using total travel cost,” Transportation Research Part A: Policy and Practice, vol. 91, pp. 302–316, 2016. T. Herrmann, G. Boisjoly, N. A. Ross, and A. M. El-Geneidy, “The Missing Middle: Fi lling the Gap Between Walkability and Observed Walking Behavior,” 2017. C. Loong, D. van Lierop, and A. El-Geneidy, “The Path of Least Resistance: Identifying Supporters of Public and Active Transportation Projects,” 2017. A. Legrain, R. Buliung, and A. M. El-Geneidy, “Travelling fair: Targeting equitable transit by understanding job location, sectorial concentration, and transit use among low-wage workers,” Journal of Transport Geography, vol. 53, pp. 1–11, 2016. L. Fordham, E. Grisé, and A. El-Geneidy, “When I’m 64: Assessing generational differences in public transit use among seniors in Montreal, Canada 2,” 2017. [1] M. S. Aslam, M. Adil, M. S. Mirza, and D. Frigon, “Sustainable community-based drinking water systems in developing countries: stakeholder perspectives,” Journal of Water Supply: Research and Technology-Aqua, vol. 65, no. 5, pp. 407–416, 2016. Y. Akutina, S. Gaskin, and L. Mydlarski, “3D-PTV in a shallow embayment,” in River Flow 2016, CRC Press, 2016, pp. 321–327.

H. Blanken, L. B. Tremblay, S. Gaskin, and A. Slavin, “Modelling the long-term evolution of worst-case Arctic oil spills,” Marine pollution bulletin, vol. 116, no. 1, pp. 315–331, 2017. P. D. la C. Bueno, L. Gillerman, R. Gehr, and G. Oron, “Nanotechnology for sustainable wastewater treatment and use for agricultural production: A comparative long-term study,” Water Res., vol. 110, pp. 66–73, Mar. 2017. M. Azodi, Y. Sultan, and S. Ghoshal, “Dissolution Behavior of Silver Nanoparticles and Formation of Secondary Silver Nanoparticles i n Municipal Wastewater by Single-Particle ICP-MS,” Environmental Science & Technology, vol. 50, no. 24, pp. 13318–13327, 2016. A. Akbari, A. A. Rahim, A. J. Ehrlicher, and S. Ghoshal, “Growth and Attachment-Facilitated Entry of Bacteria into Submicrometer Pores Can Enhance Bioremediation and Oil Recovery in Low-Permeability and Microporous Media,” Environmental Science & Technology Letters, vol. 3, no. 11, pp. 399–403, 2016. S. Bhattacharjee and S. Ghoshal, “Phase Transfer of Palladized Nanoscale Zerovalent Iron for Environmental Remediation of Trichloroethene,” Environmental Science & Technology, vol. 50, no. 16, pp. 8631–8639, 2016. J. Li, S. R. C. Rajajayavel, and S. Ghoshal, “Transport of carboxymethyl cellulose-coated zerovalent iron nanoparticles in a sand tank: Effects of sand grain size, nanoparticle concentration and injection velocity,” Chemosphere, vol. 150, pp. 8–16, 2016. D. P. Mishra, S. R. Samantaray, and G. Joos, “A combined wavelet and data-mining based intelligent protection scheme for microgrid,” IEEE Transactions on Smart Grid, vol. 7, no. 5, pp. 2295–2304, 2016. S. Bhattacharya, D. Mascarella, G. Joós, J.-M. Cyr, and J. Xu, “A Dual Three-Level T-NPC Inverter for High-Power Traction Applications,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 4, no. 2, pp. 668– 678, 2016. F. Zhang, W. Li, and G. Joos, “A Voltage-Level-Based Model Predictive Control of Modular Multilevel Converter,” IEEE Transactions on Industrial Electronics, vol. 63, no. 8, pp. 5301–5312, 2016. D. Rimorov, G. Joós, and I. Kamwa, “Design and implementation of combined frequency/oscillation damping controller for type 4 wind turbines,” presented at the 19th Power Systems Computation Conference, PSCC 2016, 2016. M. Chlela, G. Joos, and M. Kassouf, “Impact of cyber- Attacks on islanded microgrid operation,” presented at the Proceedings of the Workshop on Communications, Computation and Control for Resilient Smart Energy Systems, RSES 2016, 2016. M. Quashie and G. Joos, “Optimal planning of urban microgrids with an energy management system,” presented at the Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, 2016, vol. 2016–July. D. Rimorov, I. Kamwa, and G. Joos, “Quasi-Steady-State Approach for Analysis of Frequency Oscillations and Damping Controller Design,” IEEE Transactions on Power Systems, vol. 31, no. 4, pp. 3212–3220, 2016. C. M. Rangel, D. Mascarella, and G. Joos, “Real-time implementation & evaluation of grid-connected microgrid energy management systems,” presented at the 2016 IEEE Electrical Power and Energy Conference, EPEC 2016, 2016.

S. Biswas, A. Karthikeyan, and A.-M. Kietzig, “Effect of Repetition Rate on Femtosecond Laser-Induced Homogenous Microstructures,” Materials, vol. 9, no. 12, p. 1023, 2016. L. Matus and A.-M. Kietzig, “Extension of incubation models to moving surfaces irradiated by ultra -short pulse lasers,” in Proc. of SPIE Vol, 2017, vol. 10092, p. 100921R–1. Y. Assaf and A.-M. Kietzig, “Formation of porous networks on polymeric surfaces by femtosecond laser micromachining,” in Proc. of SPIE Vol, 2017, vol. 10092, p. 100920X–1. K. T. Ahmmed, C. Patience, and A.-M. Kietzig, “Internal and External Flow over Laser-Textured Superhydrophobic Polytetrafluoroethylene (PTFE),” ACS Applied Materials & Interfaces, vol. 8, no. 40, pp. 27411–27419, 2016. O. Raimbault, A.-M. Kietzig et al., “The effects of femtosecond laser-textured Ti-6Al-4V on wettability and cell response,” Materials Science and Engineering: C, vol. 69, pp. 311–320, 2016. R. Fernandes, J. M. Hill, and J. Kopyscinski, “Determination of the synergism/antagonism parameters during cogasification of potassium rich biomass with non-biomass feedstock,” Energy & Fuels, 2017. R. A. Arnold, R. Habibi, J. Kopyscinski, and J. M. Hill, “Interacti on of Potassium and Calcium in the Catalytic Gasification of Biosolids and Switchgrass,” Energy & Fuels, 2017. M. Kumral and Y. A. Sari, “An application of possibilistic programming to production sequencing of mining parcels,” International Journal of Management Science and Engineering Management, vol. 12, no. 2, pp. 79–88, 2017. J. R. Ruiseco and M. Kumral, “A Practical Approach to Mine Equipment Sizing in Relation to Dig-Limit Optimization in Complex Orebodies: Multi -Rock Type, Multi-Process, and Multi-Metal Case,” Natural Resources Research, vol. 26, no. 1, pp. 23–35, 2017. W. de, B. Ozdemir, B. Ragoub, T. Dunbrack, and M. Kumral, “Cost analysis of material handling systems in open pit mining: Case study on an iron ore prefeasibility study,” 2016. L. St-Pierre, Y. A. Sari, and M. Kumral, “Creation of Histograms for Data in Various Mineral Resource and Engineering Problems: A Review of Existing Methods and a Proposed New Method to Define Bin Number,” Natural Resources Research, vol. 26, no. 2, pp. 201–212, 2017. Y. A. Sari and M. Kumral, “Dig-limits optimization through mixed-integer linear programming in open-pit mines,” 2017. M. Sauvageau and M. Kumral, “Kalman Filtering-Based Approach for Project Valuation of an Iron Ore Mining Project Through Spot Price and Long-Term Commitment Contracts,” 2017. J. R. Ruiseco, J. Williams, and M. Kumral, “Optimizing Ore–Waste Dig-Limits as Part of Operational Mine Planning Through Genetic Algorithms,” Natural Resources Research, vol. 25, no. 4, pp. 473–485, 2016. D. Lin, F. Labeau, Y. Yao, A. V. Vasilakos, and Y. Tang, “Admission Control over Internet of Vehicles Attached with Medical Sensors for Ubiquitous Healthcare Applications,” IEEE Journal of Biomedical and Health Informatics, vol. 20, no. 4, pp. 1195–1204, 2016.

X. Wu, X. Han, and F. Labeau, “Cooperative spectrum sharing protocol based on transform domain processing with joint secondary selection and power allocation,” presented at the 2016 International Wireless Communications and Mobile Computing Conference, IWCMC 2016, 2016, pp. 475–480. O. Delgado and F. Labeau, “D2D relay selection and fairness on 5G Wireless networks,” presented at the 2016 IEEE Globecom Workshops, GC Wkshps 2016 - Proceedings, 2017. M. J. Hajikhani and F. Labeau, “Deploying autonomous sensors i n a substation area using energy harvesting and wireless transfer of energy,” presented at the 2016 IEEE International Conference on Communication Systems, ICCS 2016, 2017. M. S. Alam and F. Labeau, “Effect of bursty impulsive noise on the performance of multi-relay DF cooperative relaying scheme,” presented at the IEEE Vehicular Technology Conference, 2016, vol. 2016–July. X. Wu, Y. Pei, F. Labeau, and W. Zhao, “Fairness-aware resource allocation in relay-enhanced TD-LTE-A systems,” presented at the IEEE Vehicular Technology Conference, 2017. E. Xu and F. Labeau, “Impact evaluation of noise uncertainty in spectrum sensing under middleton class a noise,” presented at the 2015 IEEE 12th Malaysia International Conference on Communications, MICC 2015, 2016, pp. 36–40. F. Sacuto, G. Ndo, F. Labeau, and B. L. Agba, “MAP optimum receiver mitigating correlated impulsive noise,” presented at the IEEE Wireless Communications and Networking Conference, WCNC, 2016, vol. 2016–September. H. Mahboubi, M. Vaezi, and F. Labeau, “Mobile Sensors Deployment Subject to Location Estimation Error,” IEEE Transactions on Vehicular Technology, vol. 66, no. 1, pp. 668–678, 2017. M. S. Alam and F. Labeau, “On relay selection in bursty impulsive noise channel,” presented at the IEEE Wireless Communications and Networking Conference, WCNC, 2016, vol. 2016–September. M. S. Alam, F. Labeau, and G. Kaddoum, “Performance analysis of DF cooperative relaying over bursty impulsive noise channel,” IEEE Transactions on Communications, vol. 64, no. 7, pp. 2848–2859, 2016. F. Sacuto, F. Labeau, and B. L. Agba, “RF characterization of substations: Parameters for impulsive noise models based on the equipment voltage,” presented at the 2016 IEEE Electrical Power and Energy Conference, EPEC 2016, 2016. O. Delgado and F. Labeau, “Uplink Energy-Efficient Load Balancing over Multipath Wireless Networks,” IEEE Wireless Communications Letters, vol. 5, no. 4, pp. 424–427, 2016. R. Dawadi, S. Parsaeefard, M. Derakhshani, and T. Le-Ngoc, “Adaptive pilot-duration and resource allocation in virtualized wireless networks with massive MIMO,” presented at the IEEE Wireless Communications and Networking Conference, WCNC, 2016, vol. 2016–September. A. Masmoudi and T. Le-Ngoc, “A Maximum-Likelihood Channel Estimator for Self-Interference Cancelation in Full Duplex Systems,” IEEE Transactions on Vehicular Technology, vol. 65, no. 7, pp. 5122–5132, 2016. D.-A. Le, H. V. Vu, N. H. Tran, M. C. Gursoy, and T. Le-Ngoc, “Approximation of Achievable Rates in Additive Gaussian Mixture Noise Channels,” IEEE Transactions on Communications, vol. 64, no. 12, pp. 5011–5024, 2016.

A. Masmoudi and T. Le-Ngoc, “Channel Estimation and Self-Interference Cancelation in Full -Duplex Communication Systems,” IEEE Transactions on Vehicular Technology, vol. 66, no. 1, pp. 321–334, 2017. A. D. Shoaei, M. Derakhshani, S. Parsaeefard, and T. Le-Ngoc, “Efficient and fair hybrid TDMA-CSMA for virtualized green wireless networks,” presented at the IEEE Vehicular Technology Conference, 2017. T. D. Hoang, L. B. Le, and T. Le-Ngoc, “Energy-efficient resource allocation for D2D communications in cellular networks,” IEEE Transactions on Vehicular Technology, vol. 65, no. 9, pp. 6972–6986, 2016. S. H. Kim, T. V. K. Chaitanya, and T. Le-Ngoc, “HARQ with chase-combining (HARQ-CC) for uplink transmission in large-antenna-array multicell systems,” presented at the IEEE Vehicular Technology Conference, 2016, vol. 2016– July. S. H. Kim, T. V. K. Chaitanya, and T. Le-Ngoc, “Hybrid ARQ in Multicell MU-SIMO with Large-Scale Antenna Arrays,” IEEE Transactions on Wireless Communications, vol. 15, no. 9, pp. 5861–5874, 2016. D. H. N. Nguyen, L. B. Le, and T. Le-Ngoc, “Hybrid MMSE precoding for mmWave multiuser MIMO systems,” presented at the 2016 IEEE International Conference on Communications, ICC 2016, 2016. T. D. Hoang, L. B. Le, and T. Le-Ngoc, “Joint Mode Selection and Resource Allocation for Relay-Based D2D Communications,” IEEE Communications Letters, vol. 21, no. 2, pp. 398–401, 2017. R. Mai, D. H. N. Nguyen, and T. Le-Ngoc, “Joint MSE-based hybrid precoder and equalizer design for full -duplex massive MIMO systems,” presented at the 2016 IEEE International Conference on Communications, ICC 2016, 2016. T. D. Hoang, L. B. Le, and T. Le-Ngoc, “Joint prioritized link scheduling and resource allocation for OFDMA-based wireless networks,” presented at the 2016 IEEE International Conference on Communications, ICC 2016, 2016. A. D. Shoaei, M. Derakhshani, S. Parsaeifard, and T. Le-Ngoc, “MDP-based MAC design with deterministic backoffs in virtualized 802.11WLANs,” IEEE Transactions on Vehicular Technology, vol. 65, no. 9, pp. 7754–7759, 2016. R. Mai, D. H. N. Nguyen, and T. Le-Ngoc, “MMSE hybrid precoder design for millimeter-wave massive MIMO systems,” presented at the IEEE Wireles s Communications and Networking Conference, WCNC, 2016, vol. 2016– September. S. P. Herath, D. H. N. Nguyen, N. H. Tran, and T. Le-Ngoc, “On the sum rate of BICM-ID transmission over vectorperturbation precoding in multiuser downlink,” IEEE Transactions on Vehicular Technology, vol. 65, no. 9, pp. 7769–7773, 2016. D. H. N. Nguyen, L. B. Le, and T. Le-Ngoc, “Optimal dynamic point selection for power minimization in multiuser downlink CoMP,” IEEE Transactions on Wireless Communications, vol. 16, no. 1, pp. 619–633, 2017. R. Jimenez, N. H. Tran, and T. Le-Ngoc, “Optimal Power Allocation Schemes for the Single AF Relay and Jammer Wiretap Channels,” IEEE Transactions on Vehicular Technology, vol. 65, no. 5, pp. 3042–3056, 2016. I. Ahmed, K. T. Phan, and T. Le-Ngoc, “Optimal Stochastic Power Control for Energy Harvesting Systems with Delay Constraints,” IEEE Journal on Selected Areas in Communications, vol. 34, no. 12, pp. 3512–3527, 2016.

R. Dawadi, S. Parsaeefard, M. Derakhshani, and T. Le-Ngoc, “Power-efficient resource allocation in NOMA virtualized wireless networks,” presented at the 2016 IEEE Global Communications Conference, GLOBECOM 2016 - Proceedings, 2017. T. D. Hoang, L. B. Le, and T. Le-Ngoc, “Resource Allocation for D2D Communication Underlaid Cellular Networks Using Graph-Based Approach,” IEEE Transactions on Wireless Communications, vol. 15, no. 10, pp. 7099–7113, 2016. A. Masmoudi and T. Le-Ngoc, “Self-interference cancellation limits in full -duplex communication systems,” presented at the 2016 IEEE Global Communications Conference, GLOBECOM 2016 - Proceedings, 2017. A. Masmoudi and T. Le-Ngoc, “Self-interference mitigation using active signal injection for full -duplex MIMOOFDM systems,” presented at the IEEE Vehicular Technology Conference, 2017. C. Liu and J. Liu, “Aerobic biotransformation of polyfluoroalkyl phosphate esters (PAPs) in soil,” Environmental Pollution, vol. 212, pp. 230–237, 2016. S. Mejia-Avendaño, G. Munoz, S. Sauvé, and J. Liu, “Assessment of the Influence of Soil Characteristics a nd Hydrocarbon Fuel Cocontamination on the Solvent Extraction of Perfluoroalkyl and Polyfluoroalkyl Substances,” Analytical Chemistry, vol. 89, no. 4, pp. 2539–2546, 2017. S. Mejia-Avendaño, S. V. Duy, S. Sauvé, and J. Liu, “Generation of Perfluoroalkyl Acids from Aerobic Biotransformation of Quaternary Ammonium Polyfluoroalkyl Surfactants,” Environmental Science and Technology, vol. 50, no. 18, pp. 9923–9932, 2016. C. Zhao, Q. Wu, T. Clancy, and X. Liu, “A 3D-printed portable microindenter for mechanical characterization of soft materials,” in Automation Science and Engineering (CASE), 2016 IEEE International Conference on , 2016, pp. 201– 206. X. Li and X. Liu, “A Microfluidic Paper-Based Origami Nanobiosensor for Label -Free, Ultrasensitive Immunoassays,” Advanced healthcare materials, vol. 5, no. 11, pp. 1326–1335, 2016. W. Zhang, J. Qu, and X. Liu, “A model compensation-prediction scheme for control of micromanipulation systems with a single feedback loop,” in Robotics and Automation (ICRA), 2016 IEEE International Conference on, 2016, pp. 1154–1159. [4] X. Li, Y.-H. Wang, A. Lu, and X. Liu, “Corrections to ‘Controllable Hydrothermal Growth of ZnO Nanowires on Cellulose Paper for Flexible Sensors and Electronics’[Nov 15 6100 -6107],” IEEE Sensors Journal, vol. 16, no. 15, pp. 6142–6142, 2016. J. Qu, Q. Wu, T. Clancy, and X. Liu, “Design and calibration of 3D-printed micro force sensors,” in Manipulation, Automation and Robotics at Small Scales (MARSS), International Conference on , 2016, pp. 1–4. Z. Zhang, Y. Yu, X. Liu, and X. Zhang, “Dynamic electro-thermal modeling of V-and Z-shaped electrothermal microactuator,” in Mechatronics and Automation (ICMA), 2016 IEEE International Conference on , 2016, pp. 890– 895.

X. Li and X. Liu, “Group III nitride nanomaterials for biosensing,” Nanoscale, 2017. J. Qu, W. Zhang, A. Jung, S. Silva-Da Cruz, and X. Liu, “Microscale Compression and Shear Testing of Soft Materials Using an MEMS Microgripper With Two-Axis Actuators and Force Sensors,” IEEE Transactions on Automation Science and Engineering, vol. 14, no. 2, pp. 834–843, 2017. W. Zhang, X. Dong, and X. Liu, “Switched Fuzzy-PD Control of Contact Forces in Robotic MicroBiomanipulation,” IEEE Transactions on Biomedical Engineering, 2016. N. Luka, “Contested periurban amenity landscapes: changing waterfront ‘countryside ideals’ in central Canada,” Landscape Research, vol. 42, no. 3, pp. 256–276, 2017. S. Li, A. Khisti, and A. Mahajan, “Information-Theoretic Privacy for Smart Metering Systems with a Rechargeable Battery,” arXiv preprint arXiv:1510.07170, 2016. C. Ma, A. Mahajan, and B. H. Meyer, “Multi-Armed Bandits for Efficient Lifetime Estimation in MPSoC design,” 2017. J. Chakravorty and A. Mahajan, “Structural results for two-user interactive communication,” in IEEE International Symposium on Information Theory, 2016. J. Chakravorty and A. Mahajan, “Structure of optimal strategies for remote estimation over Gilbert-Elliott channel with feedback,” arXiv preprint arXiv:1701.05943, 2017. J. Chakravorty and A. Mahajan, “Sufficient conditions for the value function and optimal strategy to be even and quasi-convex,” arXiv preprint arXiv:1703.10746, 2017. J. Arabneydi and A. Mahajan, “Team Optimal Decentralized Control of System with Partially Exchangeable Agents–Part 1: Linear Quadratic Mean-Field Teams,” arXiv preprint arXiv:1609.00056, 2016. M. A. Meguid and M. G. Hussein, “A Numerical Procedure for the Assessment of Contact Pressures on Buried Structures Overlain by EPS Geofoam Inclusion,” International Journal of Geosynthetics and Ground Engineering, vol. 3, no. 1, p. 2, 2017. M. G. Hussein and M. A. Meguid, “A three-dimensional finite element approach for modeling biaxial geogrid with application to geogrid-reinforced soils,” Geotextiles and Geomembranes, vol. 44, no. 3, pp. 295–307, 2016. M. Meidani, M. A. Meguid, and L. E. Chouinard, “Evaluation of Soil –Pipe Interaction under Relative Axial Ground Movement,” Journal of Pipeline Systems Engineering and Practice, p. 4017009, 2017. M. Meidani, M. A. Meguid, and L. E. Chouinard, “Finite-Discrete Element Analysis of Interface Shear Damage to HDPE Geomembrane in Contact with Gravel Drainage Layer,” in Proceedings of the 7th International Conference on Discrete Element Methods, 2017, pp. 351–359. M. A. Meguid, M. G. Hussein, M. R. Ahmed, Z. Omeman, and J. Whalen, “Investigation of soil -geosyntheticstructure interaction associated with induced trench installation,” Geotextiles and Geomembranes, 2017. M. A. Meguid, G. Gao, M. M. Abouelkair, and M. Z. Abdelrahman, “Modelling the impact of particle flow on rigid structures: Experimental and numerical investigations,” in 3rd International Symposium on Mine Safety Science and Engineering, 2016, pp. 140–144.

M. Liu and B. H. Meyer, “Bounding error detection latency in safety critical systems with enhanced Execution Fingerprinting,” presented at the 2016 IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems, DFT 2016, 2016, pp. 47–52. Z. Al-Bayati, B. H. Meyer, and H. Zeng, “Fault-tolerant scheduling of multicore mixed-criticality systems under permanent failures,” presented at the 2016 IEEE International Symposium on Defect and Fault Tolerance in VLSI and Nanotechnology Systems, DFT 2016, 2016, pp. 57–62. S. C. Smithson, G. Yang, W. J. Gross, and B. H. Meyer, “Neural networks designing neural networks: Multi objective hyper-parameter optimization,” presented at the IEEE/ACM International Conference on Computer Aided Design, Digest of Technical Papers, ICCAD, 2016, vol. 7-10-NaN-2016. M. T. Kassis, Y. R. Akaveeti, B. H. Meyer, and R. Khazaka, “Parallel transient simulation of power delivery networks using model order reduction,” presented at the 2016 IEEE 25th Conference on Electrical Performance of Electronic Packaging and Systems, EPEPS 2016, 2017, pp. 211 –213. S. D. Dagondon, W. J. Gross, and B. H. Meyer, “Sparse-clustered network with selective decoding for internet traffic classification,” presented at the IEEE Workshop on Signal Processing Systems, SiPS: Design and Implementation, 2016, pp. 177–182. S. C. Smithson, K. Boga, A. Ardakani, B. H. Meyer, and W. J. Gross, “Stochastic computing can improve upon digital spiking neural networks,” presented at the IEEE Workshop on Signal Processing Systems, SiPS: Design and Implementation, 2016, pp. 309–314. R. Zhang, B. H. Meyer, K. Wang, M. R. Stan, and K. Skadron, “Tolerating the Consequences of Multiple EMInduced C4 Bump Failures,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 24, no. 6, pp. 2335–2344, 2016. M. S. N. Niaki, N. Saunier, and L. F. Miranda-Moreno, “Analysis of Cyclist Behaviour At Cycling Network Discontinuities Using Computer Vision,” 2017. S. Anowar, N. Eluru, and L. F. Miranda-Moreno, “Analysis of vehicle ownership evolution in Montreal, Canada using pseudo panel analysi s,” Transportation, vol. 43, no. 3, pp. 531–548, 2016. H. Ghomi, M. Bagheri, L. Fu, and L. F. Miranda-Moreno, “Analyzing injury severity factors at highway railway grade crossing accidents involving vulnerable road users: A comparative study,” Traffic injury prevention, vol. 17, no. 8, pp. 833–841, 2016. T. Fu, L. Miranda-Moreno, and N. Saunier, “A Novel Framework to Evaluate Pedestrian Safety at Non-Signalized Locations Using Video-Based Trajectory Data,” 2017. T. Fu, J. Stipancic, S. Zangenehpour, L. Miranda-Moreno, and N. Saunier, “Automatic Traffic Data Collection under Varying Lighting and Temperature Conditions in Multimodal Environments: Thermal versus Visible Spectrum Video-Based Systems,” Journal of Advanced Transportation, vol. 2017, 2017. S. Heydari, L. Fu, L. Joseph, and L. F. Miranda-Moreno, “Bayesian nonparametric modeling in transportation safety studies: Applications in univariate and multivariate settings,” Analytic Methods in Accident Research, vol. 12, pp. 18–34, 2016.

J. Strauss, S. Zangenehpour, L. F. Miranda-Moreno, and N. Saunier, “Cyclist deceleration rate as surrogate safety measure in Montreal using smartphone GPS data,” Accident Analysis & Prevention, vol. 99, pp. 287–296, 2017. P. Barla, M. Gilbert-Gonthier, M. A. L. Castro, and L. Miranda-Moreno, “Eco-driving training and fuel consumption: Impact, heterogeneity and sustainability,” Energy Economics, 2017. T. Romancyshyn, S. A. H. Zahabi, and L. F. Miranda-Moreno, “Evaluating Neighborhoood Travel Time Patterns, Fuel Consumption, and Greenhouse Gas Emissions Using Smartphone GPS Data,” 2017. D. Beitel, J. Stipancic, K. Manaugh, and L. Miranda-Moreno, “Exploring Cyclist-Pedestrian Interactions in Shared Space Using Automated Video Conflict Analysis,” 2017. S. A. H. Zahabi, A. Chang, L. F. Miranda-Moreno, and Z. Patterson, “Exploring the link between the neighborhood typologies, bicycle infrastructure and commuting cycling over time and the potential impact on commuter GHG emissions,” Transportation research part D: transport and environment, vol. 47, pp. 89–103, 2016. J. Stipancic, S. Zangenehpour, L. Miranda-Moreno, N. Saunier, and M.-A. Granie, “Investigating the gender differences on bicycle-vehicle conflicts at urban intersections using an ordered logit methodology,” Accident Analysis & Prevention, vol. 97, pp. 19–27, 2016. T. Romancyshyn, A. Lesani, and L. F. Miranda-Moreno, “Monitoring Signalized Intersection Performance with Bluetooth and Wifi Duration Data,” 2017. T. Fu, L. Miranda-Moreno, and N. Saunier, “Pedestrian Crosswalk Safety at Nonsignalized Crossings During Nighttime: Use of Thermal Video Data and Surrogate Safety Measures,” Transportation Research Record: Journal of the Transportation Research Board, no. 2586, pp. 90–99, 2016. D. Beitel, S. McNee, and L. F. Miranda-Moreno, “Quality Measure of Short-Duration Bicycle Counts,” 2017. M. S. Nabavi Niaki, T. Fu, N. Saunier, L. F. Miranda-Moreno, L. Amador, and J.-F. Bruneau, “Road Lighting Effects on Bicycle and Pedestrian Accident Frequency: Case Study in Montreal, Quebec, Cana da,” Transportation Research Record: Journal of the Transportation Research Board, no. 2555, pp. 86–94, 2016. J. Stipancic, L. Miranda-Moreno, and N. Saunier, “THE IMPACT OF CONGESTION AND TRAFFIC FLOW ON CRASH FREQUENCY AND 1 SEVERITY: AN APPLICATION OF SMARTPHONE-COLLECTED GPS TRAVEL DATA 2,” 2017. S. Heydari, L. Fu, L. F. Miranda-Moreno, and L. Joseph, “Using a flexible multivariate latent class approach to model correlated outcomes: A joint analysis of pedestrian and cyclist injuries,” Analytic Methods in Accident Research, vol. 13, pp. 16–27, 2017. M. Khalili and N. van, “An efficient statistical approach to multi -site downscaling of daily precipitation series in the context of climate change,” 2016. S. M. Herath, P. R. Sarukkalige, and V. T. V. Nguyen, “A spatial temporal downscaling approach to development of IDF relations for Perth airport region in the context of climate change,” Hydrological Sciences Journal, vol. 61, no. 11, pp. 2061–2070, 2016. S. M. Herath, R. Sarukkalige, and V. T. V. Nguyen, “Evaluation of empirical relationships between extreme rainfall and daily maximum temperature in Australia,” 2017.

T. A. Gado and V.-T.-V. Nguyen, “Regional estimation of floods for ungauged sites using partial duration series and scaling approach,” Journal of Hydrologic Engineering, vol. 21, no. 12, 2016. E. Asenova, H.-Y. Lin, E. Fu, D. V. Nicolau Jr., and D. V. Nicolau, “Optimal fungal space searching algorithms,” IEEE Transactions on Nanobioscience, vol. 15, no. 7, pp. 613–618, 2016. M. Lard, D. V. Nicolau et al., “The computational power of parallel network exploration with many bioagents,” Proceedings of the National Academy of Sciences of the United States of America , vol. 113, no. 23, p. E3188, 2016. S. Ghasemian and S. Omanovic, “Fabrication and characterization of photoelectrochemically-active Sb-doped Sn x-W (100-x)%-oxide anodes: Towards the removal of organic pollutants from wastewater,” Applied Surface Science, 2017. R. Li, A. Samani, E. El-Fiky, D. Patel, Q. Zhong, and D. V. Plant, “56-Gbps OOK transmission using silicon microring assisted Mach-Zehnder interferometer,” in CLEO: Science and Innovations, 2016, p. STu4G–4. M. Y. Sowailem, D. V. Plant et al., “100G and 200G single carrier transmission over 2880 and 320 km using an InP IQ modulator and Stokes vector receiver,” Optics Express, vol. 24, no. 26, pp. 30485–30493, 2016. E. El-Fiky, M. Chagnon, M. Sowailem, A. Samani, M. Morsy-Osman, and D. V. Plant, “168 Gb/s Single Carrier PAM4 Transmission for Intra Data Center Optical Interconnects,” IEEE Photonics Technology Letters, 2017. T. M. Hoang, D. V. Plant et al., “280-Gb/s 320-km Transmission of Polarization-Division Multiplexed QAM-PAM with Stokes Vector Receiver,” in Optical Fiber Communication Conference, 2017, p. W3B–4. M. Chagnon, S. Lessard, and D. V. Plant, “336 Gb/s in direct detection below KP4 FEC threshold for intra data center applications,” IEEE Photonics Technology Letters, vol. 28, no. 20, pp. 2233–2236, 2016. M. Y. Sowailem, D. V. Plant et al., “400-G Single Carrier 500-km Transmission With an InP Dual Polarization IQ Modulator,” IEEE Photonics Technology Letters, vol. 28, no. 11, p. 1213, 2016. M. Chagnon and D. Plant, “504 and 462 Gb/s Direct Detect Transceiver for Single Carrier Short-Reach Data Center Applications,” in Optical Fiber Communication Conference, 2017, p. W3B–2. M. Y. Sowailem, D. V. Plant et al., “770-Gb/s PDM-32QAM Coherent Transmission Using InP Dual Polarization IQ Modulator,” IEEE Photonics Technology Letters, vol. 29, no. 5, pp. 442–445, 2017. M. Malekiha and D. V. Plant, “Adaptive Optimization of Quantized Perturbation Coefficients for Fiber Nonlinearity Compensation,” IEEE Photonics Journal, vol. 8, no. 3, pp. 1–7, 2016. M. Malekiha and D. V. Plant, “Adaptive quantization of perturbation coefficients for nonlinearity mitigation,” in Photonics North (PN), 2016, 2016, pp. 1–2. M. Chagnon and D. Plant, “Advanced modulation formats for direct detection single carrier fiber optic shortreach systems,” in Photonics North (PN), 2016, 2016, pp. 1–1. M. Y. Sowailem, M. Morsy-Osman, O. Liboiron-Ladouceur, and D. V. Plant, “A self-coherent system for short reach applications,” in Photonics North (PN), 2016, 2016, pp. 1–1.

F. Zhang, Q. Zhuge, M. Qiu, M. Chagnon, and D. V. Plant, “Blind Adaptive XPM Model Based Digital Backpropagation for Subcarrier-Multiplexing Systems,” in ECOC 2016; 42nd European Conference on Optical Communication; Proceedings of, 2016, pp. 1–3. X. Zhou, D. V. Plant et al., “Capacity Improvement Using Bandwidth-Variable Transceiver in Meshed Optical Networks with Cascaded ROADMs,” in ECOC 2016; 42nd European Conference on Optical Communication; Proceedings of, 2016, pp. 1–3. M. Malekiha and D. V. Plant, “Complexity reduction of dispersion mitigation based on sub-band partitioning,” in Photonics North (PN), 2016, 2016, pp. 1–2. M. Xiang, D. V. Plant et al., “Digital Subcarrier Multiplexing 4-D Set-Partitioning QAM Signals,” in ECOC 2016; 42nd European Conference on Optical Communication; Proceedings of, 2016, pp. 1–3. E. Elfiky, D. Plant et al., “Dual Polarization O-Band Silicon Photonic Intensity Modulator for Stokes Vector Direct Detection Systems,” in Optical Fiber Communication Conference, 2017, p. Tu2H–5. M. Qiu, D. V. Plant et al., “Equalization-enhanced phase noise in Stokes -vector direct detection systems,” IEEE Photonics Journal, vol. 8, no. 6, pp. 1–7, 2016. F. Zhang, Q. Zhuge, and D. V. Plant, “Fast analytical evaluation of fiber nonlinear noise variance in mesh optical networks,” Journal of Optical Communications and Networking, vol. 9, no. 4, pp. C88–C97, 2017. F. Zhang, Q. Zhuge, M. Qiu, W. Wang, and D. V. Plant, “Fast Evaluation of Nonlinear Noise Variance in Dynamic Mesh Optical Networks,” in Photonic Networks and Devices, 2016, p. NeM4B–4. X. Meng, D. V. Plant et al., “Filtering Tolerant Digital Subcarrier Multiplexing System with Flexible Bit and Power Loading,” in Optical Fiber Communication Conference, 2017, p. W4A–7. M. Mirshafiei, J.-P. Bérubé, S. Lessard, R. Vallée, and D. V. Plant, “Glass interposer for short reach optical connectivity,” Optics express, vol. 24, no. 11, pp. 12375–12384, 2016. M. Chagnon, M. Osman, and D. V. Plant, “High order modulation formats for short reach optical interconnects,” in Electrical and Computer Engineering (CCECE), 2016 IEEE Canadian Conference on , 2016, pp. 1–4. M. Qiu, Q. Zhuge, M. Chagnon, F. Zhang, and D. V. Plant, “Laser Phase Noise Effects and Joint Carrier Phase Recovery in Coherent Optical Transmissions With Digital Subcarrier Multiplexing,” IEEE Photonics Journal, vol. 9, no. 1, pp. 1–13, 2017. F. Zhang, Q. Zhuge, M. Qiu, and D. V. Plant, “Low complexity digital backpropagation for high baud subcarrier multiplexing systems,” Optics Express, vol. 24, no. 15, pp. 17027–17040, 2016. F. Soltani, D. Patel, M. Menard, D. V. Plant, and A. G. Kirk, “Low-power DPSK modulation at 10 Gbps using a silicon photonic loop mirror modulator,” in Photonics Conference (IPC), 2016 IEEE, 2016, pp. 619–620. M. Xiang, D. V. Plant et al., “Modulation format identification aided hitless flexible coherent transceiver,” Optics express, vol. 24, no. 14, pp. 15642–15655, 2016.

M. Chagnon, M. Morsy-Osman, and D. V. Plant, “Multi-Dimensional Formats and Transceiver Architectures for Direct Detection With Analysis on Inter-Polarization Phase Modulation,” Journal of Lightwave Technology, vol. 35, no. 4, pp. 885–892, 2017. M. Morsy-Osman, D. V. Plant, and others, “Multi-Dimensional Modulation and Self Beating Direct Detection for Next Generation High Speed Short-Reach Optical Interconnects,” in Signal Processing in Photonic Communications, 2016, p. SpM4E–4. X. Zhou, D. V. Plant et al., “On the capacity improvement achieved by bandwidth-variable transceivers in meshed optical networks with cascaded ROADMs,” Optics Express, vol. 25, no. 5, pp. 4773–4782, 2017. D. Plant, “Optical Communicati ons Systems for Data Center Networking,” in Optical Fiber Communication Conference, 2017, p. W3B–1. M. Xiang, D. V. Plant et al., “RF-pilot aided modulation format identification for hitless coherent transceiver,” Optics Express, vol. 25, no. 1, pp. 463–471, 2017. A. D. Simard, B. Filion, D. Patel, D. Plant, and S. LaRochelle, “Segmented silicon MZM for PAM-8 transmissions at 114 Gb/s with binary signaling,” Optics Express, vol. 24, no. 17, pp. 19467–19472, 2016. A. Samani, D. Plant et al., “Silicon Photoni cs Modulator Architectures for Multi -Level Signal Generation and Transmission,” in Optical Fiber Communication Conference, 2017, p. Tu2H–4. K. McGarvey-Lechable, T. Hamidfar, D. Patel, L. Xu, D. V. Plant, and P. Bianucci, “Slow light enhancement of Qfactors in fabricated photonic crystal ring resonators,” in CLEO: Science and Innovations, 2016, p. JTh2A–100. K. McGarvey-Lechable, T. Hamidfar, D. Patel, L. Xu, D. V. Plant, and P. Bianucci, “Slow light in mass -produced, dispersion-engineered photonic crystal ring resonators,” Optics Express, vol. 25, no. 4, pp. 3916–3926, 2017. D. V. Plant, “The Evolution of Digital Signal Processing for Optical Interconnects,” in Photonic Networks and Devices, 2016, p. NeM2B–3. T. M. Hoang, D. Plant et al., “Transmission of 344 Gb/s 16-QAM Using a Simplified Coherent Receiver Based on Single-Ended Detection,” IEEE Photonics Journal, vol. 8, no. 3, pp. 1–8, 2016. A. Beheshtian, K. P. Donaghy, R. R. Geddes, and O. M. Rouhani, “Adaptation Planning for Climate-Resilient Urban Infrastructure,” 2017. O. M. Rouhani, D. Niemeier, H. O. Gao, and G. Bel, “Cost-benefit analysis of various California renewable portfolio standard targets: Is a 33% RPS optimal?,” Renewable and Sustainable Energy Reviews, vol. 62, pp. 1122–1132, 2016. O. M. Rouhani and H. O. Gao, “Evaluating various road ownership structures and potential competition on an urban road network,” Networks and Spatial Economics, vol. 16, no. 4, pp. 1019–1042, 2016. A. Beheshtian, K. P. Donaghy, and O. M. Rouhani, “Flood-Resilient Deployment of Fueling Stations: Extension of Facility Location Problem,” Transportation Research Record: Journal of the Transportation Research Board , no. 2599, pp. 81–90, 2016.

O. M. Rouhani, R. R. Geddes, H. O. Gao, and G. Bel, “Social welfare analysis of investment public–private partnership approaches for transportation projects,” Transportation Research Part A: Policy and Practice, vol. 88, pp. 86–103, 2016. P. Xu, C. Li, S. Qiu, and A. P. Sasmito, “A fractal network model for fractured porous media,” Fractals, vol. 24, no. 2, p. 1650018, 2016. J. C. Kurnia, P. Xu, and A. P. Sasmito, “A novel concept of enhanced gas recovery strategy from ventilation air methane in underground coal mines –A computational investigation,” Journal of Natural Gas Science and Engineering, vol. 35, pp. 661–672, 2016. N. Gharib, B. Bharathan, L. Amiri, M. McGuinness, F. P. Hassani, and A. P. Sasmito, “Flow characteristic and wear prediction of Herschel -Bulkley non-Newtonian paste backfill in pipe elbows,” The Canadian Journal of Chemical Engineering, 2017. P. Xu, A. P. Sasmito, C. Li, and S. Qiu, “Global and local transport properties of steady and unsteady flow in a symmetrical bronchial tree,” International Journal of Heat and Mass Transfer, vol. 97, pp. 696–704, 2016. J. C. Kurnia and A. P. Sasmito, “Heat transfer performance of non-circular coiled tubes-Research summary, challenges and directions.,” International Journal of Automotive & Mechanical Engineering, vol. 13, no. 3, 2016. J. C. Kurnia, A. P. Sasmito, T. Shamim, and A. S. Mujumdar, “Numerical investigation of heat transfer and entropy generation of laminar flow in helical tubes with various cross sections,” Applied Thermal Engineering, vol. 102, pp. 849–860, 2016. Y. Lu, S. Akhtar, A. Sasmito, and J. C. Kurnia, “Numerical study of simultaneous methane and coal dust dispersion in a room and pillar mining face,” in 3rd International Symposium on Mine Safety Science and Engineering, 2016, pp. 605–610. A. P. Sasmito, J. C. Kurnia, T. Shamim, and A. S. Mujumdar, “Optimizati on of an open-cathode polymer electrolyte fuel cells stack utilizing Taguchi method,” Applied Energy, vol. 185, pp. 1225–1232, 2017. J. C. Kurnia, A. P. Sasmito, P. Xu, and A. S. Mujumdar, “Performance and potential energy saving of thermal dryer with intermittent impinging jet,” Applied Thermal Engineering, vol. 113, pp. 246–258, 2017. S. A. Ghoreishi-Madiseh, A. P. Sasmito, F. P. Hassani, and L. Amiri, “Performance evaluation of large scale rock-pit seasonal thermal energy storage for application in under ground mine ventilation,” Applied Energy, vol. 185, pp. 1940–1947, 2017. J. C. Kurnia, A. P. Sasmito, and A. S. Mujumdar, “Potential catalyst savings in heterogeneous gaseous spiral coiled reactor utilizing selective wall coating–A computational study,” Computers & Chemical Engineering, vol. 88, pp. 59–72, 2016. S. Peralta, A. P. Sasmito, and M. Kumral, “Reliability effect on energy consumption and greenhouse gas emissions of mining hauling fleet towards sustainable mining,” Journal of Sustainable Mining, vol. 15, no. 3, pp. 85–94, 2016.

J. C. Kurnia, A. P. Sasmito, and A. S. Mujumdar, “Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application,” Heat Transfer Engineering, vol. 37, no. 16, pp. 1341– 1356, 2016. M. A. Alzoubi and A. P. Sasmito, “Thermal performance optimization of a bayonet tube heat exchanger,” Applied Thermal Engineering, vol. 111, pp. 232–247, 2017. P. Xu, A. P. Sasmito, B. Yu, and A. S. Mujumdar, “Transport Phenomena and Properties in Treelike Networks,” Applied Mechanics Reviews, vol. 68, no. 4, p. 40802, 2016. L. Shi and A. P. S. Selvadurai, “Dynamic response of an infinite beam supported by a saturated poroelastic halfspace and subjected to a concentrated load moving at a constant velocity,” International Journal of Solids and Structures, vol. 88–89, pp. 35–55, 2016. A. P. Suvorov and A. P. S. Selvadurai, “On poro-hyperelastic shear,” Journal of the Mechanics and Physics of Solids, vol. 96, pp. 445–459, 2016. A. P. S. Selvadurai and A. Głowacki, “Stress-Induced Permeability Alterations in an Argillaceous Limestone,” 2017. A. Głowacki and A. P. S. Selvadurai, “Stress-induced permeability changes in Indiana limestone,” Engineering Geology, vol. 215, pp. 122–130, 2016. A. P. S. Selvadurai and A. Katebi, “The Boussinesq–Mindlin problem for a non-homogeneous elastic halfspace,” Zeitschrift fur Angewandte Mathematik und Physik, vol. 67, no. 3, 2016. A. P. S. Selvadurai and A. P. Suvorov, “Coupled hydro-mechanical effects in a poro-hyperelastic material,” Journal of the Mechanics and Physics of Solids, vol. 91, pp. 311–333, 2016. D. Zhang and Y. Shao, “Early age carbonation curing for precast reinforced concretes,” Construction and Building Materials, vol. 113, pp. 134–143, 2016. D. Zhang and Y. Shao, “Effect of early carbonation curing on chloride penetration and weathering carbonation in concrete,” Construction and Building Materials, vol. 123, pp. 516–526, 2016. Z. He, Y. Li, and Y. Shao, “Low-temperature synthesis of C4AF by self-propagating combustion reaction,” Advances in Cement Research, vol. 29, no. 1, pp. 33–43, 2016. M. Mahoutian and Y. Shao, “Low temperature synthesis of cement from ladle slag and fly ash,” Journal of Sustainable Cement-Based Materials, vol. 5, no. 4, pp. 247–258, 2016. X. Cai, Z. He, Y. Shao, and H. Sun, “Macro-and micro-characteristics of cement binders containing high volume fly ash subject to electrochemical accelerated leaching,” Construction and Building Materials, vol. 116, pp. 25–35, 2016. Z. Ghouleh, R. I. Guthri e, and Y. Shao, “Production of carbonate aggregates using steel slag and carbon dioxide for carbon-negative concrete,” Journal of CO2 Utilization, vol. 18, pp. 125–138, 2017. M. Mahoutian and Y. Shao, “Production of cement-free construction blocks from industry wastes,” Journal of Cleaner Production, vol. 137, pp. 1339–1346, 2016.

Y. Wang, Y. Shao, M. D. Matovic, and J. K. Whalen, “Recycling combustion ash for sustainable cement production: A critical review with data-mining and time-series predictive model s,” Construction and Building Materials, vol. 123, pp. 673–689, 2016. M. Mahoutian, Z. Ghouleh, and Y. Shao, “Synthesis of waste-based carbonation cement,” Materials and Structures, vol. 49, no. 11, pp. 4679–4690, 2016. F. Mahvash, S. Eissa, T. Bordjiba, A. C. Tavares, T. Szkopek, and M. Siaj, “Corrosion resistance of monolayer hexagonal boron nitride on copper,” Scientific Reports, vol. 7, 2017. N. Hemsworth, T. Szkopek et al., “Dephasing in strongly anisotropic black phosphorus,” Physical Review B, vol. 94, no. 24, p. 245404, 2016. V. Tayari, N. Hemsworth, O. Cyr-Choinière, W. Dickerson, G. Gervais, and T. Szkopek, “Dual-Gate VelocityModulated Transistor Based on Black Phosphorus,” Physical Review Applied, vol. 5, no. 6, p. 64004, 2016. G. Gervais, T. Szkopek, and J. Guillemette, Method and system for magnetic semiconductor solid state cooling. 2016. T. Szkopek, “Physics and Photophyics II,” in 229th ECS Meeting (May 29-June 2, 2016), 2016. M. AbdelGhany, T. Szkopek et al., “Suspended graphene variable capacitor,” 2D Materials, vol. 3, no. 4, p. 41005, 2016. L. Vinches, M. Zemzem, S. Hallé, C. Peyrot, K. J. Wilkinson, and N. Tufenkji, “An improved experimental methodology to evaluate the effectiveness of protective gloves against nanoparticles in suspension ,” Journal of Occupational and Environmental Hygiene, no. just-accepted, 2017. A. R. Petosa, F. Rajput, O. Selvam, C. Öhl, and N. Tufenkji, “Assessing the transport potential of polymeric nanocapsules developed for crop protection,” Water Research, vol. 111, pp. 10–17, 2017. M. Mitzel, N. Lin, J. Whalen, and N. Tufenkji, “Chlamydomonas reinhardtii displays aversive swimming response to silver nanoparticles,” Environmental Science: Nano, 2017. L. Vinches, M. Zemzem, S. Hallé, C. Peyrot, K. J. Wilkinson, and N. Tufenkji, “Effectiveness of Protective Gloves against Engineered Nanoparticles: Difficulties in Evaluation,” Journal ISSN, vol. 1929, p. 1248, 2016. B. Asadishad, S. Chahal, V. Cianciarelli, K. Zhou, and N. Tufenkji, “Effect of gold nanoparticles on extracellular nutrient-cycling enzyme activity and bacterial community in soil slurries: role of nanoparticle size and surface coating,” Environmental Science: Nano, vol. 4, no. 4, pp. 907–918, 2017. A. L. Olsson, A. Wargenau, and N. Tufenkji, “Optimizing Bacteriophage Surface Densities for Bacterial Capture and Sensing in Quartz Crystal Microbalance with Dissipation Monitoring,” ACS applied materials & interfaces, vol. 8, no. 22, pp. 13698–13706, 2016. K. K. Wong, A. L. Olsson, B. Asadishad, B. van der Bruggen, and N. Tufenkji, “Role of cell appendages in initial attachment and stability of E. coli on silica monitored by non-destructive TIRF microscopy,” Langmuir, 2017. W. Ma, N. Tufenkji et al., “Spray-and spin-assisted layer-by-layer assembly of copper nanoparticles on thin-film composite reverse osmosis membrane for biofouling mitigation,” Water research, vol. 99, pp. 188–199, 2016.

N. Tufenkji and V. Maisuria, Synergistic combination of a phenolic-rich maple syrup extract and an antibiotic. 2016. N. Yousefi, A. Wargenau, and N. Tufenkji, “Toward More Free-Floating Model Cell Membranes: Method Development and Application to Their Interaction with Nanoparticles,” ACS applied materials & interfaces, vol. 8, no. 23, pp. 14339–14348, 2016. A. Azimzada, N. Tufenkji, and K. J. Wilkinson, “Transformations of silver nanoparticles in wastewater effluents: links to Ag bioavailability,” Environmental Science: Nano, 2017. D. Wachsmuth, “Competitive multi-city regionalism: growth politics beyond the growth machine,” Regional Studies, vol. 51, no. 4, pp. 643–653, 2017. D. Wachsmuth, “Infrastructure alliances: Supply-chain expansion and multi -city growth coalitions,” Economic Geography, vol. 93, no. 1, pp. 44–65, 2017. X. Wang, “Towards detection and control of Hopf bifurcati on in electric power system,” presented at the Proceedings - IEEE International Symposium on Circuits and Systems, 2016, vol. 2016–July, pp. 634–637. M. Alvarez-Silva, L. Vinnett, R. Langlois, and K. E. Waters, “A comparison of the predictability of batch flotation kinetic models,” Minerals Engineering, vol. 99, pp. 142–150, 2016. C. Marion, A. Jordens, R. Li, M. Rudolph, and K. E. Waters, “An Evaluation of Hydroxamate Collectors for Malachite Flotation,” Separation and Purification Technology, 2017. A. Molaei, O. Kökkılıç, and K. E. Waters, “An investigation into predispersed solvent extraction of nickel (II) ions from dilute aqueous solutions,” Separation and Purification Technology, vol. 174, pp. 396–407, 2017. A. Navarra, A. A. Rafiei, and K. Waters, “A systems approach to mineral processing based on mathematical programming,” Canadian Metallurgical Quarterly, vol. 56, no. 1, pp. 35–44, 2017. A. Jordens, C. Marion, T. Grammatikopoulos, B. Hart, and K. E. Waters, “Beneficiation of the Nechalacho rare earth deposit: Flotation response using benzohydroxamic acid,” Minerals Engineering, vol. 99, pp. 158–169, 2016. A. Jordens, C. Marion, R. Langlois, T. Grammatikopoulos, N. A. Rowson, and K. E. Waters, “Beneficiation of the Nechalacho rare earth deposit. Part 1: Gravity and magnetic separation,” Minerals Engineering, vol. 99, pp. 111– 122, 2016. A. Jordens, K. Waters et al., “Beneficiation of the Nechalacho rare earth deposit. Part 2: Characterisation of products from gravity and magnetic separation,” Minerals Engineering, vol. 99, pp. 96–110, 2016. P. Chu, K. E. Waters, and J. A. Finch, “Break-up in formation of small bubbles: an energy consideration,” Canadian Metallurgical Quarterly, vol. 56, no. 1, pp. 30–34, 2017. P. Chu, K. E. Waters, and J. A. Finch, “Break-up in formation of small bubbles: Break-up in a confined volume,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 503, pp. 88–93, 2016. P. Chu, K. E. Waters, and J. A. Finch, “Break-up in formation of small bubbles: Comparison between low and high frother concentrations,” Minerals Engineering, vol. 96, pp. 15–19, 2016.

A. Navarra and K. Waters, “Concentrator utilisation under geological uncertainty,” Canadian Metallurgical Quarterly, vol. 55, no. 4, pp. 470–478, 2016. D. Boucher, K. E. Waters et al., “Direct mineral tracer activation in positron emission particle tracking of a flotation cell,” Minerals Engineering, vol. 100, pp. 155–165, 2017. J. M. Sovechles, M. R. Lepage, B. Johnson, and K. E. Waters, “Effect of gas rate and impeller speed on bubble size in frother-electrolyte solutions,” Minerals Engineering, vol. 99, pp. 133–141, 2016. E. R. L. Espiritu and K. E. Waters, “Flotation studies of monazite and dolomite,” Minerals Engineering, 2017. X. Zhou, A. Jordens, F. Cappuccitti, J. A. Finch, and K. E. Waters, “Gas dispersion properties of collector/frother blends,” Minerals Engineering, vol. 96, pp. 20–25, 2016. L. Vinnett, T. Ledezma, M. Alvarez-Silva, and K. Waters, “Gas holdup estimation in flotation machines using image techniques and superficial gas velocity,” Minerals Engineering, vol. 96, pp. 26–32, 2016. S. Mohammadi-Jam and K. E. Waters, “Inverse gas chromatography analysis of minerals: Pyrite wettability,” Minerals Engineering, vol. 96, pp. 130–134, 2016. A. Jordens, C. Marion, T. Grammatikopoulos, and K. E. Waters, “Understanding the effect of mineralogy on muscovite flotation using QEMSCAN,” International Journal of Mineral Processing, vol. 155, pp. 6–12, 2016. C. Teng, H. Demers, N. Brodusch, K. Waters, and R. Gauvin, “X-ray Microanalysis Phase Map on Rare Earth Minerals with a Conventional and an Annular Silicon Drift Detector,” Microscopy and Microanalysis, vol. 22, no. S3, pp. 96–97, 2016. L. Shen, V. Yargeau et al., “Carbon Nanotube Integrative Sampler (CNIS) for pass ive sampling of nanosilver in the aquatic environment,” Science of The Total Environment, vol. 569, pp. 223–233, 2016. Y. Ryu, V. Yargeau et al., “Comparative measurement and quantitative risk assessment of alcohol consumption through wastewater-based epidemiology: An international study in 20 cities,” Science of the Total Environment, vol. 565, pp. 977–983, 2016. D. Nasuhoglu, P. Westlund, S. Isazadeh, S. Neamatallah, and V. Yargeau, “Development of a Facile and HighThroughput Bioluminescence Assay Using Vibrio fischeri to Determine the Chronic Toxicity of Contaminated Samples,” Bulletin of Environmental Contamination and Toxicology, pp. 1–8, 2016. Z. Baalbaki, E. Torfs, T. Maere, V. Yargeau, and P. A. Vanrolleghem, “Dynamic modelling of solids in a full -scale activated sludge plant preceded by CEPT as a preliminary step for micropollutant removal modelling,” Bioprocess and Biosystems Engineering, pp. 1–12, 2016. Z. Baalbaki, T. Sultana, T. Maere, P. A. Vanrolleghem, C. D. Metcalfe, and V. Yargeau, “Fate and mass balance of contaminants of emerging concern during wastewater treatment determined using the fractionated approach,” Science of The Total Environment, vol. 573, pp. 1147–1158, 2016. V. Yargeau and C. D. Metcalfe, “Photocatalytic Degradation of Conta minants with Titanium Dioxide: A 40-Year Retrospective on the Paper by John Carey and Colleagues Published in BECT,” Bulletin of environmental contamination and toxicology, vol. 98, no. 2, pp. 147–148, 2017.

D. Roy, A. Gherrou, P. Pierre, D. Landry, and V. Yargeau, “Reverse osmosis applied to soil remediation wastewater: Comparison between bench-scale and pilot-scale results,” Journal of Water Process Engineering, vol. 16, pp. 115– 122, 2017. M. Zhou, O. Kökkılıç, R. Langlois, and K. E. Waters, “Size-by-size analysis of dry gravity separation using a 3-in. Knelson Concentrator,” Minerals Engineering, vol. 91, pp. 42–54, 2016. D. Boucher, Z. Deng, T. W. Leadbeater, R. Langlois, and K. E. Waters, “Speed analysis of quartz and hematite particles in a spiral concentrator by PEPT,” Minerals Engineering, vol. 91, pp. 86–91, 2016. Y. Tang, K. Mak, and Y. F. Zhao, “A framework to reduce product environmental impact through design optimization for additive manufacturing,” Journal of Cleaner Production, vol. 137, pp. 1560–1572, 2016. Y. Tang, Y. Zhou, T. Hoff, M. Garon, and Y. F. Zhao, “Elastic modulus of 316 stainless steel lattice structure fabricated via binder jetting process,” Materials Science and Technology (United Kingdom), vol. 32, no. 7, pp. 648– 656, 2016. G. Singh, L. Mougel, Y. Beauregard, and Y. F. Zhao, “Towards optimal engineering multitasking level through stochastic modelling,” International Journal of Operational Research, vol. 28, no. 2, pp. 263–278, 2017.

T: (514) 398-6867 F: (514) 398-4470

Subhasis.Ghoshal@mcgill.ca

Jeffrey Bergthorson Associate Director

T: (514) 398-2003 F: (514) 398-7365

Jeff.Bergthorson@mcgill.ca

Lauren Penney Manager

Irene Toffolo Admin. Coordinator

T: (514) 398-3953 F: (514) 398-4470

T: (514) 398-6975 F: (514) 398-4470

Lauren.Penney@mcgill.ca

TISED@mcgill.ca

Mailing address: Trottier Institute for Sustainability in Engineering and Design (TISED) McGill University Macdonald Engineering Bldg., Room 378 817 Sherbrooke Street West Montreal, QuĂŠbec, H3A 0C3

CONNECT WITH US!