ICE Pubishing AIs Oct 12 to Sept 13 Part 1

www.icevirtuallibrary.com

ICE Publishing New Titles October 2012 – September 2013 Part 1

www.icevirtuallibrary.com

A Guide to the Reservoirs Act 1975, 2nd edition Defra, ICE Description: A Guide to the Reservoirs Act 1975 provides expert guidance on the application of the Reservoirs Act 1975, reflecting the current views and practices of the dam engineering profession.

This fully updated second edition incorporates the latest amendments to the Flood and Water Management Act, reflecting a more risk-based approach to reservoir regulation.

These approaches include reducing the capacity at which a reservoir will be regulated from 25,000m3 to 10,000m3, and ensuring that only these reservoirs assessed as a higher risk are subject to regulation.

Contents: Part A: Introduction to the Reservoirs Act 1975 • Historical perspective on reservoir safety in the United Kingdom • Administration of the Reservoirs Act 1975 • Guidance previously issued • User guide Part B: Reservoirs Act 1975, and the Flood and Water Management Act • Operation of Act, and administration • Latest amendments to the Flood and Water Management Act • New, enlarged and restored reservoirs • Inspections • Monitoring and supervision • Discontinuance or abandonment • Additional powers of enforcement authority • Supplementary • Transitional and temporary provisions

Readership: A Guide to the Reservoirs Act 1975 is an invaluable source of expert guidance for all those involved in reservoir management including the owners or operators of the reservoir; enforcement authorities; civil engineers; panel engineers.

Geographical market: UK

Related titles: Water Distribution Systems | 978 07277 4112 7 | £70.00 | Jan 2011 Ensuring Reservoir Safety into the Future | 978 07277 3522 5 | £120.00 | Sept 2008 Flood Risk | 978 07277 4156 1 | £75.00 | June 2012 New

Details: Price: £60.00 ISBN: 978 07277 5769 2 Format: Paperbound Publish Date: September 2012 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210 mm Number of Pages: 256pp Illustrations: 30 tables Subject area: Water and Coastal > Reservoirs

Part C: Statutory Instruments Part D: Guidance on Issues Relating to Reservoir Safety • General responsibilities • Health and safety • Interfaces with other organisations • Engineering guides Part E: Appendices • Abbreviations • Guidance for applicants to panels set up under the Reservoirs Act 1975 • Guidance from DEFRA and ICE • Check list index for inspection report • Check list index for annual statement

by Supervising Engineer

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Basic Water Treatment, 5th edition Christopher Binnie and Martin Kimber Description: Basic Water Treatment is an essential reference on all aspects of water quality and treatment principles and processes.

This accessible introduction and practical guide to water treatment focuses on the issues of most interest to practising engineers, summarising the key issues and criteria in short and accessible sections, with additional theory to explain and support the treatment processes considered. Basic Water Treatment is an essential resource for water engineers at all levels – a textbook for students, a handbook for young engineers or chemists, and an indispensable guide full of practical information for the established practitioner.

Fully revised and extensively updated by two of the world’s leading experts in the field, taking into account current UK, EU, and USA water-quality standards and treatment technologies. This fifth edition of a best-selling text provides comprehensive contemporary practical guidance and remains the definitive reference for all those involved in watertreatment systems.

Contents: 1: Introduction 2: Quality of water 3: Overview of water treatment 4: Preliminary treatment 5: Coagulation and flocculation 6: Coagulants and coagulant aids 7: Theory and principles of clarification 8: Types of clarifiers 9: Filtration 10: Membrane processes 11: Other processes 12: Disinfection 13: Waterworks wastes and sludge 14: Private water supplies 15: Water safety plans 16: Water demand and use Appendices: 1: Sample calculations 2: Comparison of different drinking waterquality standards 3: Glossary 4: SI units and basic conversion factors

Readership: Trainee engineers, engineering students, inexperienced water engineers, environmental scientists.

Geographical market: UK, Europe and North America Related titles: Water Distribution Systems | 978 07277 4112 7 | £70.00 | Jan 2011

Details: Price: £40.00 ISBN: 978 07277 5816 3 Format: Paperbound Publish Date: August 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 210 x 148mm Number of Pages: 272pp Illustrations: 60 b/w figures; 35 tables Subject area: Water and Wastewater > Potable Water Treatment

Long-term Hazard to Drinking Water Resources from Landfills | 978 07277 3513 3 | £90.00 | Feb 2009

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Car Park Designers’ Handbook, 2nd edition J.D. Hill, Glynn Rhodes and Steve Vollar Description: The unique book shows practising car park engineers and architects how to design parking buildings that are efficient and user friendly, both above and below ground level.

Featuring more than 75 3D scale drawings and explaining their individual strengths and weaknesses, this book is the only comprehensive reference for car park layout design. The book also covers the practical design of parking elements including ramps, stalls, and traffic aisles, and provides guidance on key issues including security, fire escape requirements, drainage, signage and barrier control.

The new edition includes: - Issues surrounding provision for charging hybrid and electrically powered vehicles – a topic as yet poorly addressed in the literature.

- Optimum entry and exit locations that affect layout.

- 50% more drawings – including scale drawings that can be used as templates in the layout design process.

Contents: Introduction Design brief Design elements Dynamic considerations Static considerations Circulation design Circulation layouts Stairs and lifts Disabled drivers and carers Cycles and motorcycles Security Underground parking Lighting Signage Drainage Fire escapes, safety and fire fighting Fiscal and barrier control Ventilation Structure Appearance Considerations for parking electric powered vehicles

Readership: Practising engineers and architects working on car park design; local authorities; parking consultants; parking operators. Students studying car park design.

Geographical market: Primarily UK Related titles: Recommendations for the Inspection, Maintenance and Management of Car Park Structures | 978 07277 3183 8 | £40.00 | Dec 2002 Bestseller

Details: Price: £85.00 ISBN: 978 07277 5814 9 Format: Hardbound Publish Date: June 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210mm Number of Pages: 184pp Illustrations: ~180 b/w figures; 10 tables Subject area: Municipal, Community, Urban & Rural > Public Services Amenities

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

CESMM4 Carbon & Price Book 2013 Edited by Franklin + Andrews Description: CESMM4 Carbon and Price Book has been compiled using the very latest update of the Civil Engineering Standard Method of Measurement (CESMM4). The Price Book incorporates the newest technologies without the limitations of the form of contract or the National Standards. CESMM4 updates are reflected throughout each section within the Price Book. Additionally the extent, depth and layout of vital information within the publication ensures that you can quickly and confidently achieve rapid responses to estimate requests, accurate replies to tender submissions and efficient contract administration. The continuation of embodied carbon values provides an important understanding of the carbon cost of your projects, allowing you to compile tenders with a genuinely competitive edge and realistically assess the carbon impact of your standard working practices.

CESMM4 Carbon and Price Book remains the most up-to-date source of price information available for the Civil Engineering Industry.

Contents: Introduction SECTION 1 – Unit pricing A: General Items B: Ground Investigation C: Geotechnical and Other Specialist Processes D: Demolition and Site Clearance E: Earthworks F: In Situ Concrete G: Concrete Ancillaries H: Precast Concrete I: Pipework - Pipes J: Pipework - Fittings and Valves K: Pipework - Manholes and Pipework Ancillaries L: Pipework - Supports and Protection, Ancillaries to Laying and Excavation M: Structural Metalwork N: Miscellaneous Metalwork O: Timber P: Piles Q: Piling Ancillaries R: Roads and Pavings S: Rail Track T: Tunnels U: Brickwork, Blockwork and Masonry V: Painting W: Waterproofing X: Miscellaneous Work Y: Sewer and Water Main Renovation and Ancillary Works Z: Simple Building Works Incidental to Civil Engineering Work ZZ: Alterations SECTION 2 – Approximate estimating

SECTION 3 – Plant hire rates and outputs SECTION 4 – Economic forecast SECTION 5 – Working rule agreement SECTION 6 - Professional, Government and trade bodies SECTION 7 – Technical information Index Readership: An invaluable guide for anyone who needs to prepare bills of quantities in civil engineering work and competitive tenders with claims to sustainability based on real and reliable data.

Details: Price: £160.00 ISBN: 978 07277 5812 5 Format: Paperbound Publish Date: October 2012 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210mm Number of Pages: 634pp Illustrations: 0 Subject area: Project Management > Quantity Surveying

Geographical market: Worldwide Related titles: CESMM4 | 978 07277 5751 7 | £65.00 | Apr 2012 Bestseller CESMM4: Examples | 978 07277 5759 3 | £40.00 | Dec 2013 Coming Soon CESMM4: Handbook | 978 07277 5761 6 | £70.00 | Dec 2013 Coming Soon

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

CESMM4: Examples ICE Description: This book provides a comprehensive range of examples of diagrams and bills of quantities based on Section 8, works classification, of CESMM4. The example bill pages illustrate the application of the rules of measurement in all classes of CESMM4, and comparing the different approaches required with specific contracts (e.g. NEC, FIDIC). The diagrams include some helpful short-cuts for engineers and surveyors preparing bills of quantities.

This edition has been published in a larger format to enable the diagrams to be more easily interpreted. CESMM4: Examples will undoubtedly continue the success of previous editions in providing quick easy reference examples of the usage of CESMM4.

Contents: Introduction Diagrams General items Ground investigation Geotechnical and other specialist processes Demolition and site clearance Earthworks In situ concrete Concrete ancillaries Precast concrete Pipework - pipes Pipework - fittings and valves Pipework - manholes and pipework ancillaries Pipework - supports and protection, ancillaries to laying and excavation Structural metalwork Miscellaneous metalwork Timber Piles Piling ancillaries Roads and pavings Rail track Tunnels Brickwork, blockwork and masonry Painting Waterproofing Miscellaneous work Sewer and water main renovation and ancillary works Simple building works incidental to civil engineering works

Readership: CESMM4: Examples is an invaluable guide for anyone who needs to prepare bills of quantities in civil engineering work and competitive tenders with claims to sustainability based on real and reliable data.

Geographical market: Worldwide Related titles: CESMM4 | 978 07277 5751 7 | £65.00 | April 2012 Bestseller

Details: Price: £40.00 ISBN: 978 07277 5759 3 Format: Paperbound Publish Date: December 2012 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210mm Number of Pages: 128pp Illustrations: 0 Subject area: Surveying > Standard Methods of Measurement

CESMM4: Handbook | 978 07277 5761 6 | £70.00 | Dec 2012 Coming Soon

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

CESMM4: Handbook ICE Description: This fourth edition of the handbook has been specifically produced to be used alongside the new Civil Engineering Standard Method of Measurement, fourth edition – CESMM4.

The handbook has been completely updated and includes new text to bring it in line with the changes and new material contained within CESMM4. The handbook explains the amendments which have been made to make CESMM4 contract neutral and inclusive of the latest technologies.

CESMM4: Handbook will remain indisputably the essential reference tool for all users of CESMM4 and students of civil engineering and quantity surveying.

Contents: Preface Foreword Section 1. Definitions Section 2. General principles Section 3. Application of the work classification Section 4. Coding and numbering of items Section 5. Preparation of the Bill of Quantities Section 6. Completion, pricing and use of the Bill of Quantities Section 7. Method-related charges Section 8. Work classification Class A: General items, Class B: Ground investigation, Class C: Geotechnical and other specialist processes, Class D: Demolition and site clearance, Class E: Earthworks, Class F: In situ concrete, Class G: Concrete ancillaries, Class H: Precast concrete, Class I: Pipework – pipes, Class J: Pipework – fittings and valves, Class K: Pipework – manholes and pipework ancillaries, Class L: Pipework – supports and protection, ancillaries to laying and excavation, Class M: Structural metalwork, Class N: Miscellaneous metalwork, Class O: Timber, Class P: Piles,

Class Q: Piling ancillaries, Class R: Roads and pavings, Class S: Rail track, Class T: Tunnels, Class U: Brickwork, blockwork and masonry, Class V: Painting, Class W: Waterproofing, Class X: Miscellaneous work, Class Y: Sewer and water main renovation and ancillary works, Class Z: Simple building works incidental to civil engineering works

Details: Price: £70.00 ISBN: 978 07277 5761 6 Format: Paperbound Publish Date: December 2012 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210mm Number of Pages: 256pp Illustrations: 0 Subject area: Surveying > Standard Methods of Measurement

Readership: CESMM4: Handbook is an invaluable guide for anyone who needs to prepare bills of quantities in civil engineering work and competitive tenders with claims to sustainability based on real and reliable data.

Geographical market: Worldwide Related titles: CESMM4 | 978 07277 5751 7 | £65.00 | April 2012 New CESMM4: Examples | 978 07277 5759 3 | £40.00 | Dec 2012 Coming Soon ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Construction Materials: An Introduction for Engineers An ICE Publishing Textbook Dr M Mulheron Department of Civil Engineering, University of Surrey, Guildford, UK Description: ICE Textbooks provide clear, accurate and relevant information on the major principles of civil and structural engineering at a level suitable for undergraduate students worldwide.

Divided into easily understandable modules, ICE Textbooks feature worked examples, practice questions and learning point summaries throughout.

Construction Materials: An Introduction for Engineers covers each of the key materials used in construction, detailing their properties and application in a civil and structural engineering context. Information is supported by case studies and project examples, developing initial concepts and theory through to practical engineering implications.

Contents: 1. Concrete 2. Steel 3. Composites 4. Glass 5. Aluminium 6. Masonry

Geographical market: Worldwide

Readership: Civil and structural engineering students Civil and structural engineering lecturers and trainers

ICE Manual of Construction Materials: Metals and Alloys | 978 07277 4063 2 | £30.00 | Jan 2010

Related titles: Structural Design: An introduction to the art and science of designing structures | 978 07277 5743 2 | £30.00 | April 2013 Coming soon

Details: Price: £30.00 ISBN: 978 07277 5741 8 Format: Paperbound Publish Date: April 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 234 x 156mm Number of Pages: 152pp Illustrations: ~50 b/w figures; 25 tables Subject area: Structural materials

ICE Manual of Construction Materials: Polymers and Polymer Fibre Composites | 978 07277 4120 2 | £30.00 | Jul 2010

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Dams: Engineering in a Social and Environmental Context Edited by British Dam Society Description: This book contains the proceedings of the 17th Biennial Conference of the British Dam Society, Dams: Engineering in a Social and Environmental Context. It covers practical aspects which are directly relevant to all who work in the design, construction or management of dams and reservoirs, both in the UK and abroad.

Several papers cover the construction of new dams, while many address the issues that arise from the nation’s ageing portfolio of existing dams, where spillway improvements or other works may be needed to comply with current standards or to provide operational improvements. The environmental impacts of all such works must be fully considered, and examples are given where habitat and amenity provision have been integral components of projects.

The UK legislative and policy framework is covered, with comparisons to design standards from abroad. Other papers examine aspects of the risks that dams pose to the public, and how to analyse and minimise such risks.

Contents: • The legislative and policy framework within which dam professionals work • Geotechnical aspects of dam design, construction and maintenance • Risk-related aspects of reservoirs and their operation • Construction of new dams in the UK and overseas • The environmental aspects of dam construction and repair • Incidents and remedial works to existing dams Readership: • Coastal and estuary managers/project manager • Marine/Harbour/Hydraulic engineers • Consulting engineers specialising in coastal management

Geographical market: Primarily UK Related titles: Flood Risk | 978 07277 4156 1 | £75.00 | June 2012 Managing Dams: Challenges in a time of change | 978 07277 4099 1 | £105.00 | June 2010 Ensuring Reservoir Safety into the Future | 978 07277 3522 5 | £120.00 | September 2008

Details: Price: £120.00 ISBN: 978 07277 5799 9 Format: Hardbound Publish Date: September 2012 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 234 x 156mm Number of Pages: 542pp Subject area 1: Environment > Environmental Management Subject area 2: Municipal, Community, Urban & Rural > Sustainable Communities Subject area 3: Water & Wastewater > Dams & Reservoirs / Flood Defence & Control

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Deep Excavations, 3rd edition A practical manual Malcolm Puller – Independent consultant, UK David Puller – Bachy-Soletanche Ltd, UK Description: Deep Excavations: a practical manual assembles the practical rules and details for the efficient and economical execution of deep excavations. The third edition uses international case examples, including the Nicholas Highway, Singapore, the Silken Hotel, Aldwych, alongside the experience of both design and construction from published work and practical experience to do this. Each chapter is fully updated to current practice, including the latest contractor safety measures, construction regulations (including manslaughter) and causes and avoidance of injury and fatality.

New material has been included on:  Basic reasons behind deep excavations  Typical design calculations for basement excavation support and for cofferdams  Underpinning and ground freezing in design of soil support  Risk of deep cofferdams in soft ground  CTRL cut and cover; and Well formulae And further detail included on:  the computer programs available – FLAC, ABACUS, etc.

Contents: 1. Introduction 2. The control of groundwater 3. Open excavation: side slopes and soil retention 4. Vertical soil support: wall construction 5. Design and supervision of vertical soil support 6. Cofferdam construction 7. Cofferdam design 8. Basement construction and design 9. Cut-and-cover construction 10. Caissons: construction and design 11. Soil movement due to deep excavations Appendix: Selection of typical soil parameters and correlations for initial design purposes

Geographical market: Worldwide Related titles: Specification for Tunnelling, 3rd edition | 978 07277 3477 8 | £45.00 | Mar 2010 Rock Engineering | 978 07277 4083 0 | £65.00 | Jul 2010 ICE Manual of Geotechnical Engineering | 978 07277 3652 9 | £200 00 | Feb 2012

Details: Price: £120.00 ISBN: 978 07277 4117 2 Format: Hardbound Publish Date: July 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210mm Number of Pages: 592pp Illustrations: 150 b/w figures; 75 tables Subject areas: - Site Work > Excavation - Ground Engineering > Foundations

Readership: Civil/geotechnical engineers Designers and contractors Architects Surveyors Construction managers

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Designers’ Guide to Eurocode 5: Design of Timber Buildings EN 1995-1-1 Jack Porteous and Peter Ross (series editor Haig Gulvanessian) Consulting Engineer and visiting scholar and lecturer in timber engineering at Napier University, Edinburgh, UK; Consultant, Arup, London, UK Description: This series of Designers’ Guides to the Eurocodes provides comprehensive guidance in the form of design aids, indications for the most convenient design procedures and worked examples. The books also include background information to aid the designer in understanding the reasoning behind and the objectives of the codes. All of the individual guides work in conjunction with the Designers’ Guide to EN 1990 Eurocode: Basis of Structural Design.

The part of Eurocode 5 covered by this guide, EN 1995-1, addresses the common rules and rules for buildings, including structural fire design. This Designers’ Guide looks specifically at timber buildings, including full explanation and commentary on the code with examples, and direction to the National Annex documents.

Contents: Introduction 1. Scope of EC5 Part 1 2. Basic requirements 3. Material properties 4. Durability 5. Basis of structural analysis 6. Ultimate limit states 7. Serviceability limit states 8. Connections with metal fasteners 9. Components and assembles 10 Structural detailing and control 11. Annexes A, B, C 12. Fire Design 13. Multi-storey timber frames 14. Limit state design 15. Research background

Geographical market: UK, Europe, Commonwealth Related titles: Practical Design of Timber Structures to Eurocode 5 | 978 07277 3609 3 | £60.00 | May 2009 Designers’ Guide to Eurocode: Basis of Structural Design, 2nd edition | 978 07277 4171 4 | £60.00 | Mar 2012

Details: Price: £60.00 ISBN: 978 07277 3162 3 Format: Hardbound Publish Date: February 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210mm Number of Pages: 160pp Illustrations: 30 b/w figures; 5 tables Subject area: Eurocode Guide > Timber

ICE Manual of Construction Materials | 978 07277 3597 3 | £245.00 | Jul 2009

Readership: Civil and structural engineers Code-drafting committees Clients Structural design students Public authorities

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Designers’ Guide to Eurocode 8: Design of Bridges for Earthquake Resistance EN 1998-2 Michael Fardis, Basil Kolias and Alain Pecker (series editor Haig Gulvanessian) University of Patras, Greece; DENCO SA, Greece; Géodynamique Et Structure, Greece Description: Designers’ Guide to Eurocode 8: Design of bridges for earthquake resistance covers Part 2 Bridges of EN 1998 Design of structures for earthquake resistance which is the standard for use in the seismic design of bridges in which horizontal seismic actions are mainly resisted through bending of the piers or at the abutments, and the seismic design of cablestayed and arched bridges.

The new addition to the bestselling Designers’ Guides series was written by three world renowned authorities on the subject, who were instrumental in drafting the original code.

Containing worked examples throughout, this book is the only guide which deals specifically with EN 1998-2.

Contents: Introduction and Scope 1. Requirements and criteria 2. Seismic action and geotechnical aspects 3. Conceptual design 4. Durability 5. Analysis 6. Verifications and detailed design 7. Design with isolation and dissipation 8. Design examples

Readership: Civil and structural engineers Code-drafting committees Clients Structural design students Public authorities

Geographical market: UK, Europe, Commonwealth Related titles: Designers' Guide to EN 1998-1 and 1998-5.

Eurocode 8: Design Provisions for Earthquake Resistant Structures | 978 07277 3348 1 | £75.00 | Sept 2005 ICE Manual of Geotechnical Engineering | 978 07277 3652 9 | £200.00 | Feb 2012

Details: Price: £70.00 ISBN: 978 07277 5735 7 Format: Hardbound Publish Date: October 2012 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210mm Number of Pages: 268pp Illustrations: 80 b/w figures; 10 tables Subject area: Eurocode Guide > Earthquake

ICE Manual of Bridge Engineering | 978 07277 3452 5 | £175.00 | Nov 2008

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Earthquake Design Practice for Buildings, 3rd edition Edmund Booth Description: Earthquake Design Practice for Buildings, 3rd edition provides comprehensive, practical and easy to read advice for all engineers, designers and analysts of earthquake resistant structures. This new edition has been completely revised to account for the many developments that had taken place since the publication of the best-selling second edition.

The third edition continues to provide comprehensive practical guidance and now covers: • Threats to human activity from earthquakes and strategies employed to mitigate this • Reference to SHARE, SESAME, synthetic ground motion derivation • Major update of codes – European and USA • A new prestressed concrete • Floor diaphragm design brought closer to US practice • European ideas now incorporated • New US and ISO material on contents • Supplemental damping

Contents: 1 The nature of earthquake risk and its mitigation 2 Ground motion 3 The calculation of structural response 4 Analysis of soils and soil-structure interaction 5 Initial planning considerations 6 Design codes 7 Design of foundations 8 Reinforced concrete design 9 Structural steelwork design 10 Masonry 11 Timber 12 Building contents and cladding 13 Isolation and energy absorbers 14 Assessment and strengthening of existing buildings

Geographical market: Worldwide Related titles: Designers’ Guide to Eurocode 8: Design of bridges for earthquake resistance | 978 07277 5735 7 | £70.00 | Oct 2012 Coming Soon Designers’ Guide to EN 1998-1 and 1998-5.

Eurocode 8: Design Provisions for Earthquake Resistant Structures | 978 07277 3348 1 | £80.00 | Sep 2005

Details: Price: £65.00 ISBN: 978 07277 5794 4 Format: Hardbound Publish Date: May 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 234 x 156mm Number of Pages: 368pp Illustrations: 166 b/w figures; 34 tables Subject area: Earthquake Engineering, Structures

Structural Dynamics for Engineers, 2nd edition | 978 07277 4176 9 | £30.00 | Nov 2011

Readership: Professional structural engineers, including those with little or no knowledge of earthquake resistant design, and advanced engineering students

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Earthworks: A guide, 2nd edition Paul Nowak Atkins, UK Description: Nothing can be built without some excavation and transfer of soil (or rock) from one part of a site to another and this makes earthworks the most common product of civil engineering operations. Although normally seen as major structures, such as earth fill dams or large highways or railway embankments, the majority of earthworks are connected with minor civil works and building construction. Whatever the type of work, the principles are the same. Earthworks: a guide accumulates information on topics that are essential to earthworks engineering.

After a brief historical review, Earthworks: a guide establishes the essential theoretical background to the compaction process and describes some commonly available fills, including industrial materials, both from the construction and the in-service viewpoints. The guide continues with a description of design construction control and monitoring procedures for earth fills, noting that design and control in earthworks are intimately linked.

This second edition is updated for changes to standards, legislation and specifications, as well as technological advances.

Contents: 1. Earthworks: an historical perspective 2. The compaction process 3. Some characteristics of cohesive fill 4. Some characteristics of granular and weak rock fill 5. Some characteristics of other natural deposits 6. Some properties of industrial fill 7. Earthworks specifications 8. Investigations for earthworks 9. Design construction control and monitoring 10. Excavation 11. Placement and compaction of fill 12. Cuts 13. Embankments 14. Site safety considerations

Geographical market: Worldwide Related titles: Rock Engineering | 978 07277 4083 0 | £65.00 | June 2010 ICE Manual of Geotechnical Engineering | 978 07277 3652 9 | £200.00 | Feb 2012

Details: Price: £65.00 ISBN: 978 07277 4116 5 Format: Hardbound Publish Date: September 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 234 x 156mm Number of Pages: 352pp Illustrations: 90 b/w figures; 60 tables Subject area: Ground Engineering

Readership: Earthworks is an essential and authoritative guide for a readership, which will include the chartered, or near chartered civil engineer, and the geotechnical or engineering geologist specialist. The University student will also find this book an indispensable reference source.

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Effective Site Investigation Site Investigation in Construction Series, 2nd edition Site Investigation Steering Group Description: Effective Site Investigation provides an introductory guide to accepted best practice for site investigations, both for construction professionals such as civil and structural engineers, builders and architects, and for their clients. It has been prepared by the Site Investigation Steering Group, a multidisciplinary body representing those professional institutions, learned societies, trade organisations and government agencies involved or affected by site investigations.

The second edition represents a major revision and extension of the series with the aim of bringing together the whole site investigation industry and is intended for general application to all ground investigation work.

Contents: Foreword Executive Summary Contents 1 Introduction 2 Why carry out site investigation 3 Objectives 4 Site investigation processes 5 Enabling factors 6 Tactics 7 Transferring Information References Appendices

Readership: Geotechnical engineers Engineering geologists Environmental scientists Archaeologists Geographical market: Primarily UK Related titles: UK Specification for Ground Investigation, 2nd edition | 978 07277 3506 5 | £45.00 | Nov 2011 Bestseller

Details: Price: £37.50 ISBN: 978 07277 3505 8 Format: Paperbound Publish Date: February 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210mm Number of Pages: 80pp Illustrations: 15 b/w figures; 7 tables Subject area: Ground Engineering

Guidance for Safe Investigation of Potentially Contaminated Land | 978 07277 3507 2 | £30.00 | Apr 2013 Coming Soon ICE Manual of Geotechnical Engineering | 978 07277 3652 9 | £200.00 | Sept 2011

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Environmental Geotechnics, 2nd edition Robert W. Sarsby Head of Department of the Built Environment, Anglia Ruskin University, UK Description: Environmental Geotechnics, 2nd edition provides engineers with an overview of the key aspects of the environmental interface with the construction industry and discusses a variety of geotechnical topics including some basic theoretical background knowledge, investigation methods and common geotechnical problems.

This new edition is fully revised and updated with all standards and regulations. It includes new coverage of geothermal energy and material on the use of natural/renewable materials in construction, e.g. timber, geosynthetics, vegetable fibres.

The author, R W Sarsby, is Professor of Civil Engineering and Director for Research and Scholarship of the Department of Construction and Infrastructure (COIN). He has been researching various aspects of the interaction between construction and the environment for over 30 years and has been the Institution of Civil Engineers representative on BSI committees dealing with noise and ground vibrations.

Contents: Introduction 1. Environmental aspects (assessment, legislation) 2. Definitions 3. Site investigation 4. Compaction and earthworks 5. Shear strength 6. Renewable and geothermal energy 7. Environmental impacts and limitations of open loop systems 8. Cost versus reward (life cycle) 9. Poorly commissioned systems 10. Poorly maintained and operated systems 11. Permeability and groundwater 12. Consolidation and settlement 13. Slope stability 14. Retaining systems 15. Instrumentation and stability 16. Retaining systems 17. Instrumentation and monitoring 18. Landfill waste 19. Contaminated land 20. Derelict land 21. Tips and lagoons 22. Tailing dams 23. Re-use of waste materials, noise and vibration 24. Radioactive wastes sic requirements

Readership: Geotechnical engineers Environmental engineers Clients Geographical market: Worldwide Related titles: ICE Manual of Geotechnical Engineering | 978 07277 3652 9 | £200.00 | Feb 2012

Details: Price: £100.00 ISBN: 978 07277 4187 5 Format: Hardbound Publish Date: April 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 276 x 219mm Number of Pages: 496pp Illustrations: 420 b/w figures; 120 tables Subject area: Ground engineering > Geotechnics

Stiff Sedimentary Clays | 978 07277 4108 0 | £55.00 | Feb 2011 Environmental Impact Assessment Handbook, 2nd edition | 978 07277 3509 6 | £45.00 | May 2009

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com

www.icevirtuallibrary.com

Guidance for Safe Investigation of Potentially Contaminated Land Site Investigation in Construction Series, 2nd edition Site Investigation Steering Group Description: Contaminated land contains particular hazards that require the employment of specialist geoenvironmental services with appropriately trained and experienced office and site personnel, suitable plant and equipment, and high levels of supervision and response. An addition to the Site Investigation in Construction series, this book promotes the use of safe working practices and improves awareness of health & safety.

This new edition is up-to-date with the many advances and regulatory changes affecting ground investigation, particularly in respect of contaminated ground, dealing with waste materials and different investigatory techniques, since the publication of the first edition.

Guidance for Safe Investigation of Potentially Contaminated Land provides guidance for Employers and their agents, Contractors, Engineers, site operatives and other staff.

Contents: 1 INTRODUCTION 2 LEGISLATION 3 COMPETENCE, TRAINING & QUALIFICATIONS 4 MANAGING HEALTH & SAFETY 5 DESK STUDIES 6 RISK ASSESSMENT 7 SITE CATEGORISATION 8 INTRUSIVE & NON INTRUSIVE METHODS & SITE PRACTICES 9 PROJECT SPECIFICATION 10 CONTRACTUAL REQUIREMENTS 11 INSURANCE 12 HEALTH & SAFETY PLANNING 13 PERSONAL PROTECTIVE EQUIPMENT AND SITE SAFETY EQUIPMENT 14 PLANT & EQUIPMENT 15 HEALTH SURVEILLANCE 16 SAFETY INDUCTION 17 SITE MANAGEMENT 18 HANDLING OF CONTAMINATED MATERIAL 19 STORAGE & DISPOSAL OF GEOTECHNICAL & CHEMICAL SAMPLES 20 BACKFILLING 21 DECOMMISSIONING & DEMOBILISING REFERENCES APPENDICES

Readership: Geotechnical engineers Engineering geologists Environmental scientists Archaeologists Geographical market: Primarily UK Related titles: UK Specification for Ground Investigation, 2nd edition | 978 07277 3506 5 | £45.00 | Nov 2011 Bestseller

Details: Price: £30.00 ISBN: 978 07277 3507 2 Format: Paperbound Publish Date: April 2013 Publisher: ICE Publishing Imprint: ICE Publishing Page Size: 297 x 210mm Number of Pages: 64pp Illustrations: 2 b/w figures; 9 tables Subject area: Ground Engineering

Effective Site Investigation | 978 07277 3505 8 | £37.50 | Feb 2013 Coming Soon ICE Manual of Geotechnical Engineering | 978 07277 3652 9 | £200.00 | Sept 2011

ORDERS T: +44 (0)1892 832299 F: +44 (0)1892 837272 E: orders@icepublishing.com W: icevirtuallibrary.com