MH – Shipping

MORRIS HILL

SHIPPING “Quality means doing it right when no one is looking.”

– Henry Ford

Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025

PK1

PRODUCT KNOWLEDGE IDENTIFY AND MEASURE

Bolts, Studs, & Rods Hex Head Bolt

Double End Stud

Nut Weld

Domestic/ Non-Domestic

Square Head Bolt

Single End Stud

Rebar

Bent Anchor Bolt

All Thread Rod

Double Arming Bolt

Nuts Finished Hex Nut

Jam Nut

Hex Nut

Heavy Hex Nut

Domestic/Non-Domestic

Washers Flat Washer

Plate Washer

Split Lock

Hardened Round Washer

Square Washer

Square Curved Washer

Domestic/Non-Domestic

Cage Template Plasma Ring Plate

Square Plasma Plate

Chamfered Edge

Identification and Traceablity Bin Locations

Controlled By: Quality Assurance Dept.

Heat Numbers

Lot Numbers

Revision Date: 7/10/2025

PRODUCT KNOWLEDGE

PK1

GRADE IDENTIFICATION

Bolts, Studs, & Rods Grade 55

Grade 105

Grade A449

DH

2H

Grade B7

Nuts Grade A

Washers USS

F436

Coatings/Finish Identification Plain

Hot Dip Galvanized

Wax and Dyed

“Good things come to those who believe; better things come to those who are patient; the best things come to those who DON’T GIVE UP. – Unknown

Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025

ACKNOWLEDGEMENT OF TRAINING PRODUCT KNOWLEDGE 1

Once the trainer is confident the trainee has the basic tools and knowledge to perform their job, the trainer will meet with the manager to discuss the training. Once the manager is confident in the completion of the training, he or she will sign and date each area provided below.

TRAINER:

DATE:

TRAINEE:

DATE:

SUPERVISOR:

DATE:

Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025

MISCELLANEOUS TOOLS Confident in using a tape measure Successfully use a tape gun Confident in using stretch wrap to wrap pallet Understand how and when to use hand wrap Confident in using dolly Understand how to use handheld/floor box stapler Confident in operating manual dock plate Successfully strap material using poly/steel strapping Safe use of a hammer/mallet to close container lids Successfully use zip ties to bundle material Confident in using counting/weighing scale Confident in using pallet scale Properly use a box cutter Understands how to use a bolt gauge Confident using impact drill Understands how to use a keg crimper/opener Understands how to use label printers

“The expert in anything was once a beginner.”

– Helen Hayes Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025

ACKNOWLEDGEMENT OF TRAINING MISCELLANEOUS TOOLS

Once the trainer is confident the trainee has the basic tools and knowledge to perform their job, the trainer will meet with the manager to discuss the training. Once the manager is confident in the completion of the training, he or she will sign and date each area provided below.

TRAINER:

DATE:

TRAINEE:

DATE:

SUPERVISOR:

DATE:

Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025