MH – Inventory

MORRIS HILL

INVENTORY “If you are not willing to learn, NO ONE CAN HELP YOU. If you are determined to learn, NO ONE CAN STOP YOU.” – Zig Ziglar

Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025

PRODUCT KNOWLEDGE

PK2

IDENTIFY AND MEASURE

Bolts, Studs, & Rods Swedge Bolt

Wedge Anchor Bolt

Eye Bolt

U-Bolt

Nuts Wing Nut

GRADE IDENTIFICATION

Coatings/Finish Identification Stainless Steel

Zinc

“Good things come to those who believe; better things come to those who are patient; the best things come to those who DON’T GIVE UP. – Unknown

Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025

ACKNOWLEDGEMENT OF TRAINING PRODUCT KNOWLEDGE 2

Once the trainer is confident the trainee has the basic tools and knowledge to perform their job, the trainer will meet with the manager to discuss the training. Once the manager is confident in the completion of the training, he or she will sign and date each area provided below.

TRAINER:

DATE:

TRAINEE:

DATE:

SUPERVISOR:

DATE:

Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025

MISCELLANEOUS TOOLS Confident in using a tape measure Successfully use a tape gun Confident in using stretch wrap to wrap pallet Understand how and when to use hand wrap Confident in using dolly Understand how to use handheld/floor box stapler Confident in operating manual dock plate Successfully strap material using poly/steel strapping Safe use of a hammer/mallet to close container lids Successfully use zip ties to bundle material Confident in using counting/weighing scale Confident in using pallet scale Properly use a box cutter Understands how to use a bolt gauge Confident using impact drill Understands how to use a keg crimper/opener Understands how to use label printers

“The expert in anything was once a beginner.”

– Helen Hayes Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025

ACKNOWLEDGEMENT OF TRAINING MISCELLANEOUS TOOLS

Once the trainer is confident the trainee has the basic tools and knowledge to perform their job, the trainer will meet with the manager to discuss the training. Once the manager is confident in the completion of the training, he or she will sign and date each area provided below.

TRAINER:

DATE:

TRAINEE:

DATE:

SUPERVISOR:

DATE:

Controlled By: Quality Assurance Dept.

Revision Date: 7/10/2025