PLATE SHEAR Turn machine off Set the stop to the proper length Adjust your guides to the right width and make sure the guide is squared (use speed square for this) Turn on the machine and set the blade to the proper stroke (using the limit switches) Set the guard to where it is 1/16" over the plate Run a test bar; make adjustments if needed; QC inspect
PLEASE FOLLOW ALL SAFETY PROCESSES NAD PROCEDURES WHEN OPERATING THIS MACHINE
“Ability is what you’re capable of doing. Motivation determines what you do. Attitude determines how well you do it.” – Lou Holtz
Controlled By: Quality Assurance Dept.
Revision Date: 9/5/2025