Signfix Australia Catalogue 2019

Product Catalogue

WA

1020D Frangible Aluminium Pole/Ground Sleeve Assembly, Jurien Bay

WA

1020D Frangible Aluminium Pole/Ground Sleeve Assembly, Jurien Bay

ABOUT SIGNFIX Pioneered in England in 1979, Signfix has become a world leader in developing quality fixing systems to the sign industry.

Established in Australia over 20 years ago, Signfix is a major supplier of sign fixing systems and products approved by State Road Authorities.

We don’t manufacture signs, we specialise in the design and production of all the fixtures sign makers and installers need to complete the job professionally and to the highest standard.

“We don’t manufacture signs, we specialise in the design and production of all the fixtures sign makers and installers need to complete the job professionally and to the highest standard.”

Practicality and innovation are vital to our continuing success, with solutions that are designed to meet our customers’ demands and exceed industry standards. With no compromise on quality, our products are practical, innovative, and cost effective.

QUALITY SYSTEM Signfix provide and maintain a high standard of service guided by sound business ethics and an emphasis on continuous improvement through product innovation and development.

Signfix systems are manufactured using the highest quality alloys with options for standard to anti-theft and vandal proof fixings. These unique high-end solutions alongside our patented frangible pole system provide

customers with optimal range to complement their signage needs.

Accredited to IS0 9001.2015, Signfix aims to maintain innovative, safe and high-quality products for the signage markets.

For further information visit www.signfix.com.au P 1300 1 SIGNFIX (1300 174 463) | F 02 4033 6599 | E: sales@signfix.com.au 63 Bonville Ave, Thornton NSW 2322, Australia

Product Catalogue 19.1

STAINLESS STEEL CHANNEL CLAMPS & BRACKETS Signfix clamps, brackets and clips secure signs to posts of every shape and size. Signs installed using Signfix products offer greater on-site flexibility and can offset with ease.

The stainless steel fittings have been subjected to ASTM B117 salt-spray testing for 500 hours with no significant corrosion thus, highly suitable for coastal regions.

The stainless steel product range is manufactured using an AISI 304 alloy, a highly durable material particularly beneficial where impact resistance and anti-corrosion is important.

With a market presence of over 20 years, our range of superior quality products has proven longevity.

Single Bolt Saddle Brackets

Double Bolt Saddle Brackets

Code

Description

Qty (box)

Code

Description

Qty (box)

ARC060CH

50mm NB Pole

200

HDTB140CH

125mm NB Pole

50

ARC076CH

65mm NB Pole

200

HDTB165CH

150mm NB Pole

50

ARC089CH

80mm NB Pole

100

ARC102CH

90mm NB Pole

100

ARC114CH

100mm NB Pole

100

RSJ M10 Toe Clamp C/W Tee Bolt, Washer & Nyloc Nut Mild Steel Galvanised Stirrup Bracket C/W Nut & Bolt Code

Description

Qty (box)

STRB060G

50mm NB Pole

100

STRB076G

65mm NB Pole

100

Code

Description

Qty (box)

RSJ003

M10 S/S Toe Clamp c/w 50T Bolt & Nut

200

RHS Brackets

Back to Back Clips Code

Description

Qty (box)

BBC060CH

50mm NB Pole

400

BBC076CH

65mm NB Pole

400

BBC089CH

80mm NB Pole

400

BBC102CH

90mm NB Pole

400

Code

Description Qty

Code

Description Qty (box)

LRH5050CH

50 x 50mm

100

LRH1010CH

100 x 100mm

100

LRH7550CH

75 x 50mm

100

LRH12575CH

125 x 75mm

100

LRH7575CH

75 x 75mm

100

HRH1510CH

150 x 100mm

50

LRH3876CH

38 x 76mm

100

HRH2010CH

200 x 100mm

50

LRH8989CH

89 x 89mm

100

HRH2515CH

250 x 150mm

50

LRH1005CH

100 x 50mm

100

|

1

FIXINGS FIXINGS FOR STAINLESS STEEL CHANNEL CLAMPS & BRACKETS M10 Channel Bolts & Nuts Mechanically Galvanised Code

Description

Qty (box)

M10–32CHB

M10 x 32mm M/G Cup Head Nut & Bolt

200

M10–40CHB

M10 x 40mm M/G Cup Head Nut & Bolt

200

M10–32T

M10 x 32mm M/G Tee Bolt & Nut

500

M10–50TNYLOC

M10 x 50mm M/G Tee Bolt & Nyloc Nut

100

Code

Description

Qty (box)

M10-HEXCP21

M10 x 21mm, M/G Cone Point Hex

100

M10-HEXCP25

M10 x 25mm, M/G Cone Point Set Screw

100

M10-16HEXSET

M10 x 16mm M/G Hex Set Screw

100

M10-MGWASH

M10 x 2mm M/G Flat Washer

100

M10-SSWASH

M10 x 1.2mm S/S Flat Washer

100

›› Cuphead Bolt & Nut ›› Tee Bolt & Nut

FIXINGS FOR ALUMINIUM BRACKETS M10 Fixing Bolts

Trilob Spanner / Trilob Drill Bit / Trilob Bolt ANTI-THEFT-VANDAL PROOF When additional security is required, our M10 trilob series vandal proof nuts can be supplied to secure signage and protect against theft and vandalism. Vandal proof nuts shear off under torque to a dome-headed tamper proof fixing.

Code

Description

Qty (box)

TRILOBSPAN

M10 Trilobular Spanner

Each

TRILOBKEY

Security Key for Trilobular Screw

Each

M10-TRILOB20SS

M10 x 20mm Trilobular Countersunk Set Screw Z/Y

100

M10-TRILOB21CP

M10 x 21mm Trilobular Cone Point Set Screw Z/Y

100

M10-TRILOB25ZY

M10 x 25mm Trilobular Cone Point Set Screw Z/Y

100

M10-TRILOB25SS

M10 x 25mm Trilobular Cone Point Set Screw S/S

100

M10-TRILOB40

M10 x 40mm Trilobular Cone Point Bolt Z/Y

100

Sheer Nuts ANTI-THEFT-VANDAL PROOF Zinc or Galvanised M8 & M10

2

|

Product Catalogue 19.1

Code

Description

Qty (box)

M10-SHEARNG

M10 Shear Nut Galv

100

ALUMINIUM BRACKETS The aluminium brackets offer a robust fitting for small signs and are highly resistant to damage.

Single Sided Bracket Code

Description

Qty (box)

TD1SGNFX

50mm NB Alum Ring Bracket

200

Manufactured from structural alloy.

Double Sided Bracket Code

Description

Qty (box)

TD2SGNFX

50mm NB D/Sided Alum Ring Bracket

200

Manufactured from structural alloy.

Frisbee Bracket Code

Description

Qty (box)

RZ200

50mm NB Frisbee Half Bracket

100 Sets

Manufactured from structural alloy.

Single Sided Heavy Duty Double Bolt Uni-Clamp Code

Description

Qty (box)

AU0060MCH-02

50mm NB Alum Uni-clamp S/sided

50

AU076MCH-02

65mm NB Alum Uni-clamp S/sided

50

Manufactured from structural alloy.

Double Sided Heavy Duty Double Bolt Uni-Clamp Code

Description

Qty (box)

AU0060BMCH-02

50mm NB Alum Uni-clamp D/sided

50

AU0076BMCH-02

65mm NB Alum Uni-clamp D/sided

50

Manufactured from structural alloy.

Single Bolt Uni-clamp Brackets Code

Description

Qty (box)

TD1UNI060

50mm NB Two Piece TD1 Type Uni-Clamp

100

TD1UNI076

65mm NB Two Piece TD1 Type Uni-Clamp

50

Manufactured from structural alloy.

|

3

HAZARD BOARD HEAVY DUTY BRACKET KIT

Hazard Board Heavy Duty Brackets are designed to mitigate vehicle windscreen spearing from road signs.

Currently signs installed parallel to the roadway, including sign stiffeners, present a spearing risk to vehicles that impact them end on. Fatal incidents have occurred in Australia where errant vehicles have collided with sight boards causing the sign and stiffener rails to spear through the vehicles windscreen.

To prevent a sign end from impacting the windscreen, TMR Queensland has developed and tested a new design and issued Standard Drawing 1452. This mitigates the risk of sight board sign spearing by strengthening the post connections with heavy duty clamps, ensuring the sign is pulled down with the post on impact, rather than sliding off the post.

Hazard Board Heavy Duty Bracket Kit

This project was awarded the 2018 Innovation Award at the Department of Transport and Main Roads Engineering Technology Forum.

4

|

Product Catalogue 19.1

Code

Description

HAZ-BRACKETKIT

Hazard Board Heavy Duty Bracket Kit Qld TMR Specification Drawing SD1452

HAZARD BOARD HEAVY DUTY BRACKET KIT COMPONENTS AND ASSEMBLY SPLICE PLATE ASSEMBLY CONNECTION AT SIGN JOINT

3 2

* 1

4 5 6

COMPONENT LIST Item Description

7 8 SPLICE PLATE ASSEMBLY CONNECTION AT SIGN JOINT

3 11

4

2

* 1

1*

M10 x 55 Hex bold. Grade 4.6 galvanised

2

Flat washer 40 OD x 11 ID x 2mm thick galvanised

3

Aluminium sign face

4

Type 1 Aluminium stiffener rail

5

M10 x 30 coach bolt. Grade 4.6 galvanised

6

Splice plate Aluminium

7

M10 Flat washer galvanised

8

M10 Hex nut. Grade 4.6 galvanised

9

Heavy duty post clamp galvanised

10**

M8 x 20 Tapite hex self-tapping screw

11

Sign post 60 OD

12

7.3mm drill bit

Notes: * Drill 10mm dia. holes through stiffener rail and sign face to fit M10 bolts. ** Drill 7.3 dia. holes in post to accept Taptite screws *** NI = Not Included

** 10

7 8

9

** 10 12

|

5

STAINLESS STEEL BANDING, BUCKLES & BRACKETS

Signfix offers the sign industry the versatility of stainless steel bands and fittings specially designed and packaged for sign makers and installers. The premium quality stainless steel is compatible with other Signfix materials, suiting small to large diameter poles.

201 Grade Band, Buckles and Banding Tool Code

Description

Qty (box)

RB138

10mm S/S Band (Regular)

30m Coil

STR13

13mm S/S Band

30m Coil

STR16

16mm S/S Band

30m Coil

STR19

19mm S/S Band

30m Coil

C001

Banding Tool

Each

BUC13

13mm S/S Buckles (Regular)

100

BUC16

16mm S/S Buckles (Regular)

100

BUC19

19mm S/S Buckles (Regular)

100

RS138

10mm S/S Buckles (Regular)

100

BS192

Bucklestrap 19mm x 660mm

50

BS193

Bucklestrap 19mm x 1120mm

50

Also available: 316 grade

Banding Brackets Code

Description

Qty (box)

UR151

Flared 19mm High Bracket complete with M8 x 12mm Set Screw and Washer maximum band width 13mm

100

UR251

Flared 27mm High Bracket complete with M8 x 20mm Set Screw and Washer maximum band width 19mm

100

UR251CH

Flared 29mm High Bracket complete with M10 x 16mm Set Screw and Washer maximum band width 19mm

200

MR135-9

135mm Long S/S Banding Bracket

100

D007

L Banding Bracket

50

UCC002

M10 Universal Channel Clamp

100

ALUMINIUM CHANNEL Our channel extrusions are manufactured using a high strength alloy which has excellent corrosion resistance.

M10 - Channel

6

|

Product Catalogue 17.1

Code

Description

Qty (box)

M10-CHANNEL/6

M10 Channel 6m Lengths Mill

Per Length

STREET NAME BLADE BRACKETS Street blade brackets available for 50NB & 65NB poles.

SNB 1 Way Code

Description

Qty

SNB-150-50

50mm NB x 150 Street Name Blade Bracket

Each

SNB-200-50

50mm NB x 200 Street Name Blade Bracket

Each

SNB-150-65

65mm NB x 150 Street Name Blade Bracket

Each

SNB-200-65

65mm NB x 200 Street Name Blade Bracket

Each

Code

Description

Qty

SNB2-150-50

50mm NB x 150 2 way Street Name Blade Bracket

Each

SNB2-200-50

50mm NB x 200 2 way Street Name Blade Bracket

Each

Code

Description

Qty

SNB3-150-50

50mm NB x 150 3 way Street Name Blade Bracket

Each

SNB3-200-50

50mm NB x 200 3 way Street Name Blade Bracket

Each

SNB 2 Way

SNB 3 Way

Supplied complete with fixings

Mini Offset Bracket Code

Description

Qty

OSBMSNP-01

Mini Offset Bracket c/w Two M10 Slotted Hole Angle

Each

NSW

SNB 150-50 Street name blade bracket, Thornton |

7

FRANGIBLE POLE SIGN SUPPORT SYSTEM 50mm NB

50NB Poles, Sleeves & Accessories Code

Description

AFP060/3.2M

50mm NB x 3.2m Alum Fluted Pole Mill Finish

AFP060/4M

50mm NB x 4m Alum Fluted Pole Mill Finish

SLV060300

60 x 300mm Alum Ground Sleeve for 50mm NB pole 60 x 300mm Alum Ground Sleeve for 50mm NB pole drilled & tapped w trilob

SLV060300-DT SLV060400 SLV060400-DT SLV060450 SLV060450-DT SLV060600

65mm NB

90mm NB

SLV060600-DT AFPRST060

Restraint Device to suit 50mm NB Pole

POLYCAP060

50 NB Poly Post Cap

SLVWEDGE 060

Ground Sleeve Wedge

DRILL & TAP

Drill and Tap 10mm - 50mm NB only

POLYSEAL 060

50NB Poly Sleeve Seal

65NB Poles, Sleeves & Accessories

Patent Number 2012101052 applies 8

|

Product Catalogue 19.1

Description

AFP076/4.5M

65mm NB x 4.5m Alum Fluted Pole Mill Finish

SLV076600

76 x 600mm Alum Ground Sleeve for 65mm NB pole

SLV076600-DT

76 x 600mm Alum Ground Sleeve for 65mm NB pole drilled & tapped w trilob

AFPRST076

Restraint Device to suit 65mm NB Pole

POLYCAP076

65 NB Poly Post Cap

SLVWEDGE 076

Ground Sleeve Wedge

POLYSEAL 076

65 NB Poly Sleeve Seal

80NB Poles, Sleeves & Accessories Code

Description

AFP089/5.5M

80mm NB x 5.5m Alum Fluted Pole Mill Finish

SLV089750

89 x 750mm Alum Ground Sleeve for 80mm NB pole

AFPRST089

Restraint Device to suit 80mm NB Pole

POLYCAP89

80 NB Poly Post Cap

POLYSEAL 089

80 NB Poly Sleeve Seal

90NB Poles, Sleeves & Accessories Code

100mm NB

60 x 450mm Alum Ground Sleeve for 50mm NB pole 60 x 450mm Alum Ground Sleeve for 50mm NB pole drilled & tapped w trilob 60 x 600mm Alum Ground Sleeve for 50mm NB pole 60 x 600mm Alum Ground Sleeve for 50mm NB pole drilled & tapped w trilob

Code

80mm NB

60 x 400mm Alum Ground Sleeve for 50mm NB pole 60 x 400mm Alum Ground Sleeve for 50mm NB pole drilled & tapped w trilob

Description

AFP102/6M

90mm NB x 6M Alum Fluted Pole Mill Finish

SLV102850

102 x 850mm Alum Ground Sleeve for 90mm NB pole

AFPRST102

Restraint Device to suit 90mm NB Pole

POLYCAP102

90 NB Poly Post Cap

POLYSEAL 102

90 NB Poly Sleeve Seal

100NB Poles, Sleeves & Accessories Code

Description

AFP114/6.5M

100mm NB x 6.5m Alum Fluted Pole Mill Finish

AFP114PCG61

Powder Coating Green G61 100mm NB Poles

SLV1141000

114mm x 1m Alum Ground Sleeve for 100mm NB pole

AFPRST114

Restraint Device to suit 100mm NB Pole

POLYCAP114

100 NB Poly Post Cap

POLYSEAL 114

100 NB Poly Sleeve Seal

GROUND SLEEVE

TO SUIT 50NB AND 65NB GALVANISED STEEL POLES AND ALUMINIUM POLES The high-strength marine grade alloy used in 50NB and 65NB Signfix ground sleeves have excellent resistance to corrosion. Our ground sleeves work well with aluminium or galvanised steel poles.

Standard sleeve lengths: SLV060: 50NB 300, 400, 450 & 600mm lengths.

Custom lengths available on request.

SLV076: 65NB 600mm lengths.

Custom lengths available on request.

Features include: ›› The external shape ensures sleeves will not rotate when set in concrete. ›› Internal dimensions of all sleeves are designed to be a snug fit with the pole. ›› Sleeves are fitted with PVC end caps to prevent concrete entering the sleeve during installation.

Sleeves can be supplied with an M10 tapped hole located 15mm below the sleeve top, to fit either an M10 hex bolt or a trilobular security set screw. This option is ideal for securing PVC poles and in this instance, it’s recommended sleeves are placed 30mm above ground level.

ACCESSORIES SLVWEDGE Standard wedge zinc plated Sleeves are designed to be fitted with a standard wedge, allowing sleeves to be installed flush at ground level.

Poly Post Cap & Ground Sleeve Seal

Ground Sleeve Seal

The Signfix poly post cap fits internally into the pole for a firm fit to reduce water ingress.

Sleeve with standard wedge

Sleeve with 1 trilob fastener

The innovative Signfix ground sleeve seal provides a barrier to prevent dirt and water from entering the ground sleeve, minimising the chance of corrosion,

Standard Wedge

Poly Post Cap

Patent Number 2012101052 applies |

9

GROUND SLEEVE

TO SUIT 80NB, 90NB & 100NB ALUMINIUM POLES Designed to suit 80NB, 90NB and 100NB aluminium frangible poles, Signfix ground sleeves are made from high strength marine grade alloy. The alloy has excellent resistance to corrosion and over the years has proven performance with our aluminium poles.

Standard sleeve lengths: SLV089: 80NB 750mm lengths.

SLV0102: 90NB 850mm lengths.

SLV0114: 100NB 1000mm lengths.

Features include: ›› The external shape ensures sleeves will not rotate when set in concrete. ›› Internal dimensions of all sleeves are designed to be a snug fit with the pole. ›› Sleeves are fitted with PVC end caps to prevent concrete entering the sleeve during installation.

Sleeves can be supplied with two M10 tapped holes located 15mm below the sleeve top, to fit two trilobular security set screws.

ACCESSORIES TRANSITION WEAR SHOE Sleeves are designed to be fit with a transition shoe & two trilobular fasteners.

All 80NB, 90NB and 100NB sleeves come with a transition shoe.

Sleeve with trilob fastener and transition shoe

Patent Number 2012101052 applies 10

|

Product Catalogue 19.1

To prevent the M10 triobular locking bolts from wearing into the aluminium poles and causing fracture points, the patented stainless steel transition shoe was developed. The stainless steel transition shoe fits between the aluminium pole wall and M10 triobular locking bolts, to prevent wear and eliminate any electrolysis action between the M10 triobular locking bolts and aluminium pole.

The innovative stainless steel transition shoe MUST be placed between the pole and locking bolts and tightened evenly between 10 and 12 Nm.

POLE RESTRAINT DEVICE

POLE RESTRAINT DEVICE TO SUIT FRANGIBLE ALUMINIUM POLES On impact, the Signfix frangible pole is designed to tear and break away at the sleeve top and in some instances, could deflect into the carriageway. The pole restraint device will secure the base of the pole close to the sleeve top after the pole has separated from the sleeve, rather like an ankle tap.

The restraint device is made from a heavy-duty bracket, clamped to the pole 100mm above the sleeve top. Heavy duty galvanised chain is attached to the bracket and connects the lower locking bolt located at the sleeve top. The chain length can vary depending on the pole diameter.

To ensure the breakaway process remains consistent a 10mm hole must be drilled on site through the pole 15mm above the sleeve top, with the locking bolts facing oncoming traffic. The hole needs the provided plug to be used to reduce water ingress.

The restraint device fits within the pole bracket attached to the pole before securing the pole in the sleeve.

Trilobular locking bolts must be tightened from 10 – 12 Nm. To further reduce damage or injury, Signfix recommends the device is fitted to all Signfix frangible poles, particularly in high pedestrian and traffic areas.

Pole restraint device on Byfield National Park sign, Queensland.

Patent Number 2012101052 applies

|

11

TECHNICAL SPECIFICATIONS

ALUMINIUM FRANGIBLE SIGN SUPPORT SYSTEM The Signfix Aluminium frangible sign support system is approved and used extensively by Transit New Zealand, VicRoads, Transport SA, RMS, Main Roads WA, Queensland’s Department of Transport and Main Roads, Tasmanian Department of State Growth, and NT Department of Infrastructure.

Signfix commissioned the Roads and Traffic Authority of NSW to carry out a series of crash tests at the RTA’s Crash-Lab in Sydney.

“The test results successfully proved that pole sizes 50, 65, 80, 90 & 100mm NB fell within the frangibility guidelines of the NCHRP-350 standard for open road conditions.”

The test results successfully proved that pole sizes 50, 65, 80, 90 & 100mm NB fell within the frangibility guidelines of the NCHRP-350 standard for open road conditions.

The patented system works in conjunction with a purpose made ground sleeve designed to be a snug fit between pole and socket.

Depending on the pole diameter, sleeves can be supplied from 300mm to 1m lengths. Sleeves are set in concrete foundations designed to meet local engineering requirements.

The sleeve top acts as the shear point and combined with the molecular structure of the alloy will, under sudden impact, bend the pole at the point of impact and will ultimately shear and breakaway at the socket top.

The pole flutes are designed to further assist in the breakaway process by reducing the external surface area of the pole.

Both pole and sleeve are manufactured from high strength marine grade alloy with a typical yield strength of 240 MPa. This alloy has good age hardening qualities and will continue to strengthen over time.

For further technical information consult the crash test report, structural information and installation guide available from Signfix.

Patent Number 2012101052 applies 12

|

Product Catalogue 19.1

WA

1020D Frangible Aluminium Pole/Ground Sleeve Assembly, Perth

POLE & SLEEVE INSTALLATION

RECOMMENDED INSTALLATION FOR ALUMINIUM FRANGIBLE POLES Foundations should be excavated to the required depth retaining a minimum diameter of 400mm. Remove all loose debris before pouring concrete.

When setting out and pouring concrete on multi pole sites, install kerb side socket first.

The sleeve must be centralised in the hole and set on a concrete base ensuring the sleeve top is between 50 – 90mm above ground level. Place sleeve with the locking bolts facing the oncoming traffic.

Using only wet concrete, carefully pour around the sleeve up to ground level. It is important to ensure that during the final pour the sleeve remains perpendicular by using a spirit level across the sleeve top with sleeve remaining in the centre of the foundation.

When the kerbside sleeve is in place and the site is level, repeat the process with the remaining sleeves. Be careful to ensure that the top of each remaining sleeve is level and perpendicular with the kerbside sleeve.

When the concrete is hardened, generally 24 hours, the poles are placed in the sleeves and firmly secured using the security bolts and transition wear shoe provided. When all sleeves are installed correctly, and the poles are equal length, the pole top should be level ready to install the sign.

For sloping sites, install sleeves 50 – 90mm above ground. The difference in the sleeve levels should be compensated for when calculating the pole lengths to ensure pole tops are level.

ADDITIONAL INFORMATION › For adequate foundation strength use concrete of not less than 28mpa. › To ensure that frangibility works within the requirements of NCHRP-350, all pole sizes 50NB and above must be installed using a matching sleeve. All sleeves must be fully encased using wet premixed concrete. › Check the correct pole size and number of poles required for each installation by referring to the Signfix wind loading charts on pages 15 – 17. Charts are also available online at www.signfix.com.au. › Obtain all foundation details from a local engineer before the commencement of any installation. › To prevent difficulty in removing the security bolt from a damaged or bent pole, position sleeves with the locking device facing oncoming traffic. › The stainless steel transition shoe must be placed between the pole and locking bolts and tightened evenly between 10 & 12 Nm. › Recommended use of Signfix Poly Caps to prevent water ingress. › Restraint device can be fit to poles to improve safety in high volume vehicle/pedestrian areas.

Patent Number 2012101052 applies |

13

GROUND SLEEVE AND FOUNDATION LAYOUT TO SUIT 80, 90 & 100MM NB POLES

Drawing not to scale Issue Date: 31/07/2019

It is strongly recommended that foundation details are obtained from a local registered engineer prior to any installation.

Aluminium fluted pole

The post cap must be fitted into the pole to reduce water ingress.

The ground sleeve seal must be fitted to prevent dirt and water from entering the ground sleeve.

Stainless steel transition shoe must be fitted and placed between the pole and locking bolts with the locking evenly tightened between 10-- 12 Nm Maximum 90mm

2 x M10 trilobular stainless steel set screws

Concrete foundation to local engineers specification

Varies

Varies

Aluminium ground sleeve

Sleeve end cap

Minimum 400mm

Patent Number 2012101052 applies 14

|

Product Catalogue 19.1

SIGNFIX FRANGIBLE SIGN SUPPORT SYSTEM

Frangible #1

The patented Signfix fluted pole and socket system is fully frangible meeting the requirements of NCHRP-350 for open road conditions.

Easy to install

Simple to install with no specialist equipment required. No props are needed for ground sleeves and larger poles during the foundation hardening process.

Light & easy to handle

Strength comparable to steel equivalents

Lightweight, making the poles easy to handle and convenient to transport.

Signfix aluminium frangible poles are similar in strength to steel equivalents.

Innovative system

Maintenance free

A breakaway restraining device is available for busy traffic and pedestrian areas. Patented stainless-steel transition shoe is supplied to prevent wear and eliminate any electrolysis action between the locking bolts and pole.

Manufactured from marine grade alloy Signfix fluted poles remain maintenance free for the whole of life.

Easily replaced

In the event of damage frangible poles can be easily removed and replaced within existing foundations.

Frangibility is multi directional

No compromise for driver and pedestrian safety.

Standard sizes fitting universal brackets

The standard sizes allowing all bracket types and brands to fit.

As part of the Delnorth Group, Signfix strives to meet the service levels demanded by contractors and installers nationwide.

ISO9001.2015 accredited.

Patent Number 2012101052 applies |

15

AUSTRALIAN WIND REGIONS

This work is licensed under a Creative Commons Attribution 3.0 Australia. http://creativecommons.org/licenses/by/3.0/au/

P

© State of Queensland (Department of Transport and Main Roads) 2015, Traffic and Road Use Management (TRUM), vol. 1, Part 10 [23]. Edited version.

16

|

Product Catalogue 19.1

S

NOTES: 1. FOR SIGNS NOT LOCATED WITHIN THE JURISDICTION OF THE QUEENSLAND GOVERNMENT DEPARTMENT OF TRANSPORT AND MAIN ROADS, WITH THE SIGN AREAS (”A1”x”B1”) GREATER THAN 10m2 AND/OR IN REGIONS OTHER THAN REGION A OR REGION B, THESE DESIGN CHARTS ARE NOT VALID. REFER TO AS1742.2 OR TO RELEVANT STATE AUTHORITY GUIDES FOR SIGN SUPPORTS OUTSIDE THE SCOPE OF THE DESIGN CHARTS. THESE DESIGN CHARTS ARE BASED ON DESIGN WIND SPEEDS ADOPTED IN THE QUEENSLAND DESIGN GUIDE FOR ROAD SIGNS WHICH HAVE HIGHER PROBABILITY OF EXEEDANCE THAN THOSE DERIVED FROM AS1170.

2. ON UNEVEN GROUND ‘H’ = HEIGHT OF THE TALLEST POST. 3. FOR SIGNS IN EXPOSED LOCATIONS PRONE TO HIGH WIND OR WHERE POST COLLAPSE IS MORE HAZARDOUS THAN NORMAL SITUATIONS, SELECT ONE SECTION SIZE UP FROM THAT DERIVED ON THE GRAPH, OR USE AN EXTRA POLE. 7.

6.

5.

4.

REFER TO QUEENSLAND DESIGN GUIDE FOR ROAD SIGNS FOR FOOTING SIZES. USE FOOTING SIZES APPLICABLE TO THE SAME DIAMETER STEEL CHS POST. MULTIPLE POST SIGNS MUST HAVE AT LEAST 1.5m SPACING BETWEEN THE POSTS TO COMPLY WITH THE QUEENSLAND DESIGN GUIDE FOR ROAD SIGNS FRANGIBILITY REQUIREMENTS. SINGLE POST SIGN SUPPORTS MUST ONLY BE USED WHERE THE SIGN ATTACHMENT RESISTS ROTATION AND IS IN ACCORDANCE WITH STATE AUTHORITY GUIDELINES. CHARTS ARE BASED ON POLES WITH ALUMINIUM GRADE 6061-T6.

3.

NOTES: 1.

FOR SIGNS NOT LOCATED WITHIN THE JURISDICTION OF THE QUEENSLAND GOVERNMENT DEPARTMENT OF TRANSPORT AND MAIN ROADS, WITH THE SIGN AREAS (”A1”x”B1”) GREATER THAN 10m2 AND/OR IN REGIONS OTHER THAN REGION A OR REGION B, THESE DESIGN CHARTS ARE NOT VALID. REFER TO AS1742.2 OR TO RELEVANT STATE AUTHORITY GUIDES FOR SIGN SUPPORTS OUTSIDE THE SCOPE OF THE DESIGN CHARTS. THESE DESIGN CHARTS ARE BASED ON DESIGN WIND SPEEDS ADOPTED IN THE QUEENSLAND DESIGN GUIDE FOR ROAD SIGNS WHICH HAVE HIGHER PROBABILITY OF EXEEDANCE THAN THOSE DERIVED FROM AS1170.

2.

ON UNEVEN GROUND ‘H’ = HEIGHT OF THE TALLEST POST.

17

|

Product Catalogue 19.1

4.

5.

6.

7.

FOR SIGNS IN EXPOSED LOCATIONS PRONE TO HIGH WIND OR WHERE POST COLLAPSE IS MORE HAZARDOUS THAN NORMAL SITUATIONS, SELECT ONE SECTION SIZE UP FROM THAT DERIVED ON THE GRAPH, OR USE AN EXTRA POLE. REFER TO QUEENSLAND DESIGN GUIDE FOR ROAD SIGNS FOR FOOTING SIZES. USE FOOTING SIZES APPLICABLE TO THE SAME DIAMETER STEEL CHS POST. MULTIPLE POST SIGNS MUST HAVE AT LEAST 1.5m SPACING BETWEEN THE POSTS TO COMPLY WITH THE QUEENSLAND DESIGN GUIDE FOR ROAD SIGNS FRANGIBILITY REQUIREMENTS. SINGLE POST SIGN SUPPORTS MUST ONLY BE USED WHERE THE SIGN ATTACHMENT RESISTS ROTATION AND IS IN ACCORDANCE WITH STATE AUTHORITY GUIDELINES. CHARTS ARE BASED ON POLES WITH ALUMINIUM GRADE 6061-T6.

3.

NOTES: 1.

FOR SIGNS NOT LOCATED WITHIN THE JURISDICTION OF THE QUEENSLAND GOVERNMENT DEPARTMENT OF TRANSPORT AND MAIN ROADS, WITH THE SIGN AREAS (”A1”x”B1”) GREATER THAN 10m2 AND/OR IN REGIONS OTHER THAN REGION A OR REGION B, THESE DESIGN CHARTS ARE NOT VALID. REFER TO AS1742.2 OR TO RELEVANT STATE AUTHORITY GUIDES FOR SIGN SUPPORTS OUTSIDE THE SCOPE OF THE DESIGN CHARTS. THESE DESIGN CHARTS ARE BASED ON DESIGN WIND SPEEDS ADOPTED IN THE QUEENSLAND DESIGN GUIDE FOR ROAD SIGNS WHICH HAVE HIGHER PROBABILITY OF EXEEDANCE THAN THOSE DERIVED FROM AS1170.

2.

ON UNEVEN GROUND ‘H’ = HEIGHT OF THE TALLEST POST.

4.

5.

6.

7.

FOR SIGNS IN EXPOSED LOCATIONS PRONE TO HIGH WIND OR WHERE POST COLLAPSE IS MORE HAZARDOUS THAN NORMAL SITUATIONS, SELECT ONE SECTION SIZE UP FROM THAT DERIVED ON THE GRAPH, OR USE AN EXTRA POLE. REFER TO QUEENSLAND DESIGN GUIDE FOR ROAD SIGNS FOR FOOTING SIZES. USE FOOTING SIZES APPLICABLE TO THE SAME DIAMETER STEEL CHS POST. MULTIPLE POST SIGNS MUST HAVE AT LEAST 1.5m SPACING BETWEEN THE POSTS TO COMPLY WITH THE QUEENSLAND DESIGN GUIDE FOR ROAD SIGNS FRANGIBILITY REQUIREMENTS. SINGLE POST SIGN SUPPORTS MUST ONLY BE USED WHERE THE SIGN ATTACHMENT RESISTS ROTATION AND IS IN ACCORDANCE WITH STATE AUTHORITY GUIDELINES. CHARTS ARE BASED ON POLES WITH ALUMINIUM GRADE 6061-T6.

IMPACT RECOVERY

Poly-flex significantly reduces your organisation’s sign replacement and installation costs.

High quality polyurethane, master batch (colour) and UV stabilisers are injection moulded at Delnorth manufacturing facilities to provide products with high impact resistance and flexibility.

POLYFLEX POLYMER BASES Code

Description

Qty (carton)

PF1

Round Socket Mount Coupling

16

›› Overall width facing traffic 70mm. ›› Height above ground to bottom of post 120mm ›› Pipe diameter 48mm I/D x 60mm O/D Code

Description

Qty (carton)

PF2S

Surface Mount Coupling

10

›› Overall width facing traffic 70mm. ›› Base flange diameter 185mm. ›› Height above ground to bottom of post 155mm Code

Description

Qty (carton)

PF3

Square Socket Mount Coupling

16

›› Overall width facing traffic 70mm. ›› Height above ground to bottom of post 120mm ›› Pipe diameter 48mm I/D x 60mm O/D ›› Suits V-Lock socket Code

Description

Qty (carton)

SM

Surface Mount Yellow Poly-Flex Base to suit Steel-Flex post products

28

›› Height above the ground to bottom of post 50mm

POLYFLEX POLYMER BASES AND POST SIZES Code

Description

Qty (pallet)

PF10600

PF1 base with 600mm poly post

400

PF10900

PF1 base with 900mm poly post

400

PF11200

PF1 base with 1200mm poly post

400

PF2S0600

PF2S base with 600mm poly post

300

PF2S0900

PF2S base with 900mm poly post

300

PF2S1200

PF2S base with 1200mm poly post

300

PF30600

PF3 base with 600mm poly post

300

PF30900

PF3 base with 900mm poly post

300

PF31200

PF3 base with 1200mm poly post

SM06

SM base with 550mm white Steel-Flex post

250

SM08

SM base with 750mm white Steel-Flex® post

250

300 ®

›› Holes punched into Steel-Flex® post to suit sign placement

POLYFLEX BASE, POSTS AND POLYCARBONATE SIGNS

20

|

Product Catalogue 19.1

Code

Description

Qty (box)

PF1121R2-209A

Socket Mount 1200mm Post 150mm x 1150mm R2209A Sign

50

PF25091R2-3A

Surface Mount 900mm Post 950mm x 600mm R2-3A Sign

50

NSW INSTALLATIONS

NSW

1140D Frangible Aluminium Pole/Ground Sleeve Assembly, Airport Tunnel Sign, Mascot NSW

NSW

890D Frangible Aluminium Pole/Ground Sleeve Assembly, Scone Bypass Project Sign, Scone

NSW

1020D Frangible Aluminium Pole/Ground Sleeve Assembly, Reduce Speed Sign, Cameron Park, Newcastle

|

21

ACT

NSW

1140D Frangible Aluminium Pole/Ground Sleeve Assembly, Newcastle

ACT

890D Frangible Aluminium Pole/ Ground Sleeve Assembly, Isabella Plains

22

|

Product Catalogue 19.1

ACT

1140D Frangible Aluminium Pole/Ground Sleeve Assembly, Variable Message Speed Sign, Phillip

1020D Frangible Aluminium Pole/Ground Sleeve Assembly, Ashley Drive

IMPACT IMAGES

WA

WA

VIC

VIC

1140D Frangible Aluminium Pole (powder coated yellow)/ Ground Sleeve Assembly, impact, Perth

1140D Frangible Aluminium Pole/Ground Sleeve Assembly, impact, Benalla

1140D Frangible Aluminium Pole (powder coated yellow)/ Ground Sleeve Assembly, impact, Perth

1140D Frangible Aluminium Pole/Ground Sleeve Assembly, impact, Benalla

|

23

NSW

VIC

QLD

QLD

1020D Frangible Aluminium Pole/Ground Sleeve Assembly, Golden HIghway Warkworth

600D Frangible Aluminium Pole/Ground Sleeve Assembly, Rockhampton

24

|

Product Catalogue 19.1

1140D Frangible Aluminium Pole/Ground Sleeve Assembly, Geelong

1140D Frangible Aluminium Pole/Ground Sleeve Assembly, Mount Tamborine

NT

TAS

1020D Frangible Aluminium Pole/Ground Sleeve Assembly, Darwin

1140D Frangible Aluminium Pole/Ground Sleeve Assembly, Hobart

WA

1140D Frangible Aluminium Pole (powder coated yellow)/Ground Sleeve Assembly, MRWA School Zone Project, Perth

WA

1140D Ground sleeve in a 500mm pre-cast concrete footing, MRWA School Zone Project, Perth

|

25

Signfix Australia is a division of Delnorth Pty Ltd ABN 26 051 954 977.

The Signfix system was originally pioneered in England in 1979 and has since become a World leader in developing quality fixing systems to the sign industry. Signfix has been established in Australia as a major supplier of sign fixing systems for over 20 years, with many of its products approved by Government Road Transport and Infrastructure Departments Nationwide.

Our aim is to provide and maintain a high standard of service conducted on sound business ethics, with emphasis on continuous improvement of product through innovation and development.

SUPPLIERS TO

For further information visit www.signfix.com.au P 1300 174 463 (1300 1 SIGNFIX) | F 02 4033 6599 | E: sales@signfix.com.au 63 Bonville Ave, Thornton NSW 2322, Australia