Protector Images Manual

PROTECTOR IMAGES STEP-BY-STEP MANUAL

©2022 THE CONCRETE PROTECTOR, 1601 McKINLEY RD.,ST. MARYS, OH 45885 • 877-743-9732 • THECONCRETEPROTECTOR.COM

PROTECTOR IMAGES PERSONAL PROTECTION It’s always recommended to wear the appropriate Personal Protective Equipment (PPE) for the task at hand and follow your employer’s safety policy. Commonly known PPE such as safety glasses, gloves, earplugs, respirators, etc, are recommended as needed.

For further information on OSHA requirements, visit https://www.osha.gov/Publications/osha3151.pdf

STARTING OUT: DECISIONS

(For in-depth instructions, see Prep Manual) 1 Where will the logo be placed?

2 What shape and size will the logo be?

3 What will the color/design of the logo be?

4 Will the logo be placed over a solid colored or broadcast media background?

5 Will the logo be installed before or after the rest of the floor coating is applied?

LOGO INSTALLATION 1 Lay the logo on the floor in the desired location.

2 Using tape, tape around the edges of the logo creating the exact outline of where the logo will be installed.

3 When logo installation is being done after the rest of the floor coating has been applied, sand the taped off area.

4 Clean the sanded area and let dry.

5 Using protective paper and tape, cover the area immediately surrounding the space where the logo is to be installed.

6 When applying over a solid colored background, apply solid color now and let dry.

7 Center and lay the logo in the designated area.

8 Using small pieces of tape, tack down the logo on the top and bottom approximately half the length of the logo, creating two halves which can be lifted.

9 Lift one half of the logo, apply a thin layer of desired sealer on the floor surface under that half of the logo.

10 Lay logo using a roller with sealer working from the inside out while smoothing out wrinkles & air bubbles leaving a thin coat of sealer under & on top of the logo.

11 Repeat with the second half, remove the small tape pieces which were used for tacking.

12 Allow sealer to dry.

13 Multiple coats of sealer can be applied until desired texture is reached.

14 Remove all protective specialty tape, paper, plastic, etc.

15 Make sure project area is clean, presentable, and free from debris.

To learn advanced repair products, techniques, and in-depth methods on this system, go to decorativeconcreteu.com or scan our QR code.

©2022 THE CONCRETE PROTECTOR, 1601 McKINLEY RD.,ST. MARYS, OH 45885 • 877-743-9732 • THECONCRETEPROTECTOR.COM

PROTECTOR IMAGES PRODUCTS Desired Sealer * Coverages and dry times vary depending on application techniques and temperature.

Estimations are based on 70 degrees, 30 percent relative humidity.

For more information, refer to TDS sheets.

SEALER OPTIONS SKU:

PRODUCT:

DRY TIME:

1 EN-6303

Epoxy Neat Coat

*Dry Time 8-16 hours

2 UT-4515

Perfect Poly 90

*Dry Time 1-2 hours

3 UT-4451

Protector-Thane

*Dry Time 6-8 hours

TOOLS SKU:

PRODUCT:

1 TL-7235 2 RL-4323, RL-4341, RL-4313 3 RL-4325, RL-4335, RL-4319 4 TCR-1001 5 RL-4317 6 TP-7507 7 RL-4309 8 TL-7393, TL-7395 9 RL-4343

Mixing Tarps 4”, 9”, or 18” 3/8” Nap Roller Covers 4”, 9”, or 18”Roller Frames WTF Top Coat Roller Roller End Caps 2” Green Specialty Tape 18” Paint Tray Threaded and Tapered Roller Poles 2” Chip Brushes Gloves Mixing Containers Stir Sticks

10 ET-7323 11 12

COST & PRICING 1 54” wide and smaller= $14.00 per. sq.ft.

3 $35 setup fee

2 Larger than 54” wide= $15.00 per sq. ft.

4 TYPICAL PRICING= $40.00- $80.00 per sq. ft.

Additional costs: *Standard turnaround time is approximately 7-10 business days from proof approval. **If needed WITHIN 5 business days, an additional $100 Rush Fee will be incurred. Let your Rep know date needed delivered. ***$65 hr for design, if design time is needed to rebuild a low resolution logo/image.

Acceptable logo format: Vector, .eps, or editable press quality pdf. Most jpgs or png’s are not large enough to enlarge for quality printing.

To learn advanced repair products, techniques, and in-depth methods on this system, go to decorativeconcreteu.com or scan our QR code. ©2022 THE CONCRETE PROTECTOR, 1601 McKINLEY RD.,ST. MARYS, OH 45885 • 877-743-9732 • THECONCRETEPROTECTOR.COM

PROTECTOR IMAGES

BENEFITS & FEATURES The Concrete Protector offers high quality images to give your concrete floor a quality logo you’re sure to love. Unlike thin vinyl stickers, Concrete Protector images are made of perforated cloth-like material allowing for 100% encapsulation, and placed into your floor, which makes them an integral part of your floor. Get a great looking logo for your decorative concrete floor with The Concrete Protector. Our images and logos add a whole new dimension of customization to your decorative concrete floor.

- Excellent durability - Long lasting/ vibrant colors - In-house design - 100% material penetration into logo - Unlimited design options

TIPS & TRICKS Installing a floor logo can be done before or after the rest of the floor area is coated, it is based on job necessity.

- It’s best practice to sand the previous coating where the logo will be applied.

- Remember to remove the white backing from the logo before installation.

- Unless installing a large logo, little material will be needed. Mix small batches.

- Be aware of the recoat windows of products being used.

- The first coat of material used to lay the logo in should be applied thin.

- If installing the logo prior to application of floor coating, protect the logo from application issues like: bleed, spiking, etc…

- When taping designated area and shape of logo, leaving an 1/8” variance is handy.

- If necessary, using an iron, iron out the bends in the logo.

- If a more vibrant logo color is desired, it’s best to install the logo over a solid-colored background.

- Using a plastic putty knife may help in getting rid of air bubbles.

- If using fast drying material, watch the edges of the logo for pop-ups and press them down as the material cures out.

- YouTube video: https://www.youtube.com/watch?v=zLjkhC36v1w

To learn advanced repair products, techniques, and in-depth methods on this system, go to decorativeconcreteu.com or scan our QR code. ©2022 THE CONCRETE PROTECTOR, 1601 McKINLEY RD.,ST. MARYS, OH 45885 • 877-743-9732 • THECONCRETEPROTECTOR.COM