TESI Ignition Systems catalogue 2006

FLEXIBILITY AND VERSATILITY Our long experience gained by supplying ignition units which are specifically designed for our customers, has allowed us to develop a unique range of igniters, electrodes and ignition terminals for use worldwide.

Our mission is to always be able to supply the most suitable solutions depending on the real world demands of any desired application.

The modular devices in our high energy, next generation power supplies provide the greatest flexibility and versatility for specific applications.

Wide resources have been dedicated to the development of these new ignition components, which can tolerate the highest of thermal stresses. Derived from experience acquired in the field of gas turbines, these components are fabricated with materials often used in the aerospace sector in order to ensure correct operation up to a temperature of 1500 °C.

ASPIRED AIR PILOT

MOBILE, ON TROLLEY

GAS OIL PILOT TERMINAL

ASSURED IGNITION IN ANY CONDITION High energy equipment: The high energy or the capacity discharge ignition systems use the particular characteristics of a power amplifier circuit that can generate sparks (max 10/sec) with a power of several Joules. The regular sparking is not affected by the presence of dirt or humidity on the electrodes.

It is the best suited system to ignite hardly flammable combustibles.

It can often replace traditional pilot torches.

MAIN FEATURES High power Very reliable and long lasting Maintenance free Versatility New generation high energy system, now available from TeSi, replace the gas spark tubes, low reliable and very expensive with “state of the art” power semiconductors.

The innovative and interactive power supply provide the sparks frequency regulation with no loss in the spark power. Excellent for multi fuels burners.

• • • •

ATEX POWER PACK

“HE” POWER PACK

MULTIPLE EXECUTION

Range of high energy power packs Type

Power

Voltage

Sparks/sec.

Power supply

Max absorption

XEC09H

9J

1500 V

2

AC 110/220 V

300 W

XEC18H

18J

3000 V

2

AC 110/220 V

450 W

XEC36H

36J

3000 V

2

AC 110/220 V

600 W

XEC03M

3/18J

1000 V

1=3

AC 110/220 V

100 W

MODULAR HIGH ENERGY POWER UNIT TeSi developed this modular device in order to facilitate the triggering of burners installed on Flares at elevated heights. The ignition unit is in fact increasingly more often installed in a remote position with respect to the ignition electrode.

Thanks to the innovative jump discharge circuit, this device is able to generate a spark up to a distance of 500 m.

Compared to the traditional model, this power pack provides a smoother jump spark power distribution, thereby allowing ignition even with the most difficult combustibles. The particular manufacturing process makes it completely impermeable to external agents.

TeSi therefore suggests its use if installed in difficult conditions (high humidity, deposits, oxidation…).

TECHNICAL FEATURES • • • • • • • •

2 sparks per second (INCREASED ON DEMAND on certain models) Available power: 3 or 18 Joule Standard AC 110/220 V power supply; DC 12/24 V on demand Jutting input and output wires for an easier installation on the control panels (connectors on demand) Completely insulated metal case by means of dielectric resin Power absorption: 100 VA Weight: 2,5 Kg Output voltage: 1000 V

MODULAR POWER PACK

HIGH ENERGY (HE) IGNITERS AND IGNITION BITS TeSi is the owner of the historic trade marks Elter and IRTI. It gives its clients the prospect of a wide range of igniters; in particular, trailing devices to use in highly corrosive areas.

Transformation kits allow a qualitative upgrading of old ignition systems.

RETRACTABLE “HE” IGNITER

GAS OIL PILOT

GAS PILOT WITH DETECTOR

Range of high energy ignition tips for igniters Type

Code

Diameter mm

Temperature °C

Outdoor use

Impermeable

For Gas

For Gasolio

HEM 17

ZZA00100

17 (FINAL 12)

900/1100

•

•

•

•

HERC 17

ZZA00106

17

900/1100

•

•

•

•

HEK 17

ZZA00110

17

600

•

HEM 14

ZZA00130

14 (FINAL 12)

900/1100

HERC 14

ZZA00135

14

900/1100

•

•

•

•

HEM 12

ZZA00160

12

900/1100

•

•

•

•

HERC 12

ZZA00161

12

900/1100

•

•

•

•

•

HIGH TENSION (HT) IGNITION POWER UNITS These simple systems employ the high-voltage power unit (usually 6000/8000 V) in order to generate an electric arc with low power (150/300 W). They are suitable in the presence of highly inflammable combustibles. They do not tolerate high thermal stresses, and they poorly tolerate the presence of humidity and combustion residuals. They represent the inexpensive solution to ignition problems.

The ignition spark is generated by a simple insulated ceramic spark plug.

TeSi fabricates a wide range of spark plugs, even explosion-proof.

HT SPARK PLUG

ATEX HT SPARK PLUG

HT ELECTRODE

HT POWER TRANSFORMER

EXPLOSION-PROOF All power packs, both the HE and the HT, can be realized as ATEX II 2GD explosion-proof, for EExdIIB or EExdIIC areas, for stationary or mobile use. Several versions are provided with the appropriate certification documents.

CASES

HIGH VOLTAGE AND HIGH TEMPERATURE CONNECTION CABLES Each ignition system is equipped with the proper connection devices. Cables are available with the desired length, and set in different configurations, in order to comply with the constraints associated to the clientspecified area and operating temperature.

HIGH ENERGY MOBILE IGNITER Version IP65 - Model XE 18 PB00 TeSi developed this device in order to ease the trigger of igniters not provided with a proper ignition unit (pilot torch or otherwise).

Furthermore, this device is a valuable resource in case of emergency or breakdown of the former systems.

Compared to the previous XE8Pb92 model, this power supply generates a more-than-double spark power (18 J, compared to 8 J), allowing ignition even with the most difficult combustibles, without being affected by the hardest conditions (humidity, deposits, oxidations).

MAIN FEATURES • 2 powerful sparks (18 Joule each) every second • Endurance: approximately 800 ignition cycles with a fully charged and in good condition battery • Power supply connector for the battery recharger • Indicator of battery charge by means of a multi-coloured LED Connection cables and igniters are furnished with the desired length.

TECHNICAL FEATURES Activated by a 12Vcc 7Ah rechargeable accumulator, whit internal battery charger MAIN UNIT

BATTERY CHARGER

CASE

IMPUT VOLTAGE: DC 12 V

IMPUT VOLTAGE: AC 115 o 230 V VERSION

VERSIONE: IP65-SECURE AREA

OUTPUT VOLTAGE: DC 3000 V

OUTPUT VOLTAGE: DC 13,5 V

EXTRUDED ALLUMINIUM : 170x110x325 mm

ENERGY: 18 JOULE CHARGE

CURRENT: 500 mA

WEIGHT: 5,7 Kg

FREQUENCY: 2 Hz

MAINTENANCE: 40 mA

COLOUR: LIGHT GREY

ABSORBANCE: 150 W

The complete recharging process takes at least 24 hours. The unit is protected from any possible overload.

Recharge is simply performed by connecting the provided extension cable with the black wired connector on the superior plate of the device.

The extension cable is 1.5 meters (4.92 feet) long and it has a loose plug of type SHUCO. Always verify the correspondence of the input voltage.

Do not recharge in restricted areas.

TeSi S.r.l. - Head Office Via Piave 20/11 - 20080 Vermezzo (Milano) Italy Tel. +39.02.9440501 - Fax +39.02.9449087 e-mail: andrea@tesigroup.com - www.tesigroup.com

UNI EN ISO 9002

THE INTERNATIONAL CERTIFICATION NETWORK