SUSTAINABILITY REPORT 2018
Production Tellure Rôta S.p.A. Contacts Davide Clò: davide.clo@tellurerota.com
Modena, February 2019
Dear Friends,
The results for 2018 were positive overall, considering not only our commercial growth, but also the addition of new products and a number of organisational improvements. The increase in turnover by 2.4% was influenced by a generalised slowdown in market demand during the fourth quarter. Performance was particularly bright in terms of the qualitative progress made: the acquisition of new customers, the opening of new markets, the design of new products and the consolidation of new production processes, all developed from our technical and commercial ability to listen to and interpret the needs of our customers. The principle that guides our daily activities, “Striving to improve, always�, was the inspiration of our founder, Roberto Lancellotti, who passed away on 8 July 2018: since then, this principle has provided even greater impetus for our company to pursue the improvement of products and services with determination and a will to win, in the knowledge that this will inevitably lead to growth and sustainable success over time. Grateful appreciation for all the expressions of affection and admiration received in the form of visits, prayers, messages, letters, donations and flowers, from friends, employees and former employees, agents, customers and suppliers, which transformed a day of sadness into a celebration of life. In his memory, a brief profile of Roberto Lancellotti is presented below.
Further thanks go to all those who contributed to the results and activities of the company during the year.
We hope you find this report interesting,
2
Roberto Lancellotti: a life spent striving to improve, always.
Born in 1926, he initially lived with his family in Albareto, Modena, on a small farm that raised cows for milk and made cheese on a small scale. The family soon moved to Modena, because his father, Adolfo Lancellotti, a decorated WW1 pilot with a great passion for flying, became the chief instructor at the Modena Aereo Club. Every afternoon, he played with his sister, Carla, and other children in the field next to the runway. Their games were always interrupted by the noise of engines during take-offs, landings and the aerial manoeuvres of his father. One cold, autumnal afternoon when he was 13, the fateful news came that would change his prospects and outlook for the future for ever. A crash close to the Aereo Club on 31 October 1939 had caused the death of Adolfo Lancellotti, instructor, and Bergamini, engineer, who were testing a new plane. The years of sadness began, first at school and then at the Gorizia Military College run by ONFA, for the orphans of civil and military aviation, where he formed and found the companions who would become part of his family for the rest of his
life. A military career followed and he attended, without finishing, the faculty of engineering at the Aeronautical Military Academy in Florence and Rome. This military life proved incompatible with his free and independent spirit, so he left the armed forces in 1950 to pursue his vocation as an entrepreneur. A drive to succeed, great ambition, but reality checks too, with difficulties and insufficient funds. He worked for Maserati for a few months, but then became a sales agent for industrial oils, and later for screws, nuts and bolts, before opening a business selling industrial products that soon became a retailer of car accessories and body parts for cars and trucks. This business together with his sister, known as Accessauto, quickly became one of the largest Fiat Dealers in Body Parts in Italy, with four branches in Modena, ForlĂŹ, Pesaro and Campogalliano. The company remained in the family until 1983, when it was sold to the Cremonini family, which later closed the commercial business but continued to manage the valuable properties held.
Roberto Lancellotti
Alongside this commercial experience at Accessauto, in 1955 he partnered with Enrico Rota in R.O.T.A. Costruzioni Meccaniche, an outsourcing firm that produced dies for the deep drawing and cutting of sheet metal, pressed metal for third parties and Pirelli rubber wheels with full, semiempty and pneumatic rings. In early 1961, Enrico Rota sold his quotas to Roberto Lancellotti and his wife, Carla, who changed the name of the company into Tellure Rota spa. With commitment, courage, passion and foresight, he transformed this artisan business into an industrial firm that is well established in international markets.
Even during the period of union strife in the late 1970s, he managed the company like a family, with a great sense of social responsibility, seeking dialogue, shared solutions and constant improvement. It soon became clear that a successful entrepreneur cannot merely do a good job, but must also work on behalf of the entire category. In 1973, he promoted the start of an Italian group of wheel and castor manufacturers (UCIR, still active today), in order to define standards and regulations that were later adopted at European level. He actively participated in various associations, first Api and then Confindustria, but above all made a decisive contribution to the creation of guarantee consortiums, which are fundamental for business access to funding on assisted terms. In particular, he promoted Cofim, the Modena guarantee consortium, together with other entrepreneurs and was its chairman from inception
3
in 1982 until 1987. This experience led him to form Fidindustria Emilia-Romagna, a mediumterm guarantee consortium that covered all the trade associations in the principal towns of EmiliaRomagna. He chaired this consortium from 1988 to 1996. Subsequently, he participated in the formation in Rome of Federconfidi, the national federation of guarantee consortiums, which he chaired from 1995 to 1997. With a great sense of responsibility, he arranged a gradual generational handover, ensuring the continuity of the company in the hands of his children, while continuing to monitor activities with affection and discretion.
Being born in the countryside, spending his adolescence under the influence of engines and engineering, and receiving lengthy military training all provided solid foundations for his personality and distinctive characteristics: tremendous drive to make progress for ever, trust in and respect for individuals and curiosity. Although work dominated his life, he always maintained strong and concrete ties with his numerous family and excellent relations with his friends, collaborators and many others with whom he greatly loved to enjoy himself, transmitting enthusiasm and cheerfulness. When Roberto Lancellotti died on 8 July 2018 he left a profound emptiness, due to the strong ties that he had managed to establish with persons of every age, position and place.
5
Contents Letter to the Stakeholders
1
Union relations
38
Roberto Lancellotti
2
Customers
40
Summary of 2018
7
Communications
42
Suppliers
44
Community engagement
45
5. Tellure R么ta do Brasil
50
6. Our commitments
52
7. Tellure R么ta and UN 2030 Agenda
53
8. Tellure R么ta and the GRI (Content Index)
54
Methodological note to the 2018 Report
56
1. Company profile
8
Our values
9
Our milestones
10
Who we are
11
Certifications
12
Code of Ethics
13
Sustainability Policy
14
Sustainability Report
15
Sustainability and Innovation networks
15
2. Economic Sustainability
16
Glossary
57
Results for 2018
17
Questionnaire
60
Turnover and sales volume
18
Production and distribution of value added
20
Investment
22
Research and development
23
3. Environmental Sustainability
24
Production process and environmental aspects
25
Consumption of raw materials
26
Management of energy
27
Production, management and re-use of waste
28
Consumption of water and fuel for
30
transportation Greenhouse gas emissions
31
4. Social Sustainability
32
Employees
33
Welfare activities
35
Learning at Tellure R么ta
36
Safety and risk prevention
37
7
Summary of 2018
29,924,000 € 5,682,657 € 10,861,000 € 240 2.4% 400,000 € 169 2,231 6% 1,709 50%
Sales
Number of items
Value added
New customers
Investment on sales
Investment in R&D (1.3%)
Employees
Hours of training
Reduction in raw material consumption
Tonnes of waste sent for recovery
Suppliers within 100 km
8
1. Company profile
Company profile
9
Our values Tellure Rôta is one of the principal European firms active in the design, production and distribution of industrial wheels and brackets, based in Formigine, a town in the Italian province of Modena.
• innovation and orientation towards the future of solutions, materials and commercial services,
• sustainability
and measurement, transparency and awareness,
“Striving to improve, always.” These simple words, which have always characterised the company, embody the keywords of the business: improvement, innovation, sustainability.
• personnel development
Words that have represented the philosophy of Tellure Rôta since 1953:
• respect for the environment
• improvement and development of products, processes, services and solutions,
reporting,
via our cornerstone values:
• customer satisfaction • integrated management of business activities via agile, homogeneous and consistent operations.
10
Company profile
Our milestones 1953 - 1970
From 2010 to date
Foundation of the artisan business in Modena
Qualification and accreditation of the Test & Research laboratory by the High Technology Network of the Emilia-Romagna Region
Trademark registration and transformation into a limited company Equipment of a chemistry-physics laboratory to formulate polyurethane coatings for wheels and to test products 1970 – 1990 Daily production of 2,000 wheels with 100 employees Relocation to the current headquarters in Formigine covering 10,000 sq.m. Internal CRM system with external link to agents and representatives 1990 - 2010 ISO 9001 quality certification Formation of Tellure Rôta do Brasil ISO 14001 environmental certification Expansion of production capacity with purchase of a 3,000 sq.m. factory close to the headquarters Launch of the lean production project OHSAS 18001 occupational safety certification
Expansion of thermoplastic moulding production in a third, 1,500 sq.m. factory located nearby Legality rating obtained Implementation of a new layout for the production of polyurethane wheels in accordance with the latest manufacturing logic, with introduction of the first plant created in accordance with INDUSTRY 4.0 principles Replacement of the information system
integrated
management
Update to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certifications
Company profile
11
Who we are Tellure Rôta is a limited liability company (SpA) with a share capital of 3,640,000, fully paid, that is wholly owned by L.M. Spa, the investment and property holding company of the Lancellotti family.
• wheels and castors coated in TR polyurethane, TRRoll polyurethane and Vulkollan®
Led by Emanuela Lancellotti, Chairman, Elena Lancellotti, Managing Director, and Giorgio Mercalli, General Manager, the company has 169 employees, a broad network of Italian and foreign agents, and grassroots distribution covering more than 70 countries.
• brackets made from steel sheet and stainless steel for medium loads
TR Lab is accredited with the high technology network organised by the Emilia Romagna Region. This internal laboratory is an integral part of the product innovation process and carries out testing activities, even for third parties, on the materials used and their physical, chemical and mechanical performance. TR Lab also offers specialist consultancy on such topics as ergonomics, smooth running, safety in the workplace, reduction of effort and consumption, the durability of products, and total operating costs.
• wheels for furniture
The range of Tellure Rôta wheels and brackets comprises more than 8,000 standard items, with a carrying capacity of up to 3,500 kg for many uses, as well as special products designed to satisfy specific customer needs.
• automated injection moulding of plastics
The product range is organised as follows: • wheels made from standard, elastic, pneumatic and thermoplastic rubber • monolithic wheels made from polyamide, phenolic resin and cast iron
• wheels and castors in thermoplastic polyurethane
• brackets made from electro-welded steel for heavy loads • wheels for the community
Production takes place in 3 factories located in the same industrial zone, with a covered area of 15,000 sq.m. All processes are carried out internally, except for the production of rubberised gaskets, the casting of metal hubs (steel and cast iron), and the surface treatments of metals. Production activities include: • automated pressing of metal sheet and strip
• production of elastomeric polyurethane wheels using automated and manual plant • assembly of wheels, brackets and wheels+brackets using automated and manual plant and the packaging of finished products. Activities are organised in accordance with “Lean Production” principles, in order to respond flexibly to customer requests while maintaining reliability and speed of delivery.
12
Company profile
Certifications In part, the Sustainability policy of Tellure Rôta is demonstrated to stakeholders via the voluntary adoption of management systems for various business activities that are certified to international standards by independent third parties. The implementation and constant maintenance of an Integrated Quality-Environmental-Safety System highlights the attention dedicated to customer satisfaction, the environment and the local community, as well as to employees and everyone who collaborates with the company. This is because it is necessary to go beyond the existing regulations, guaranteeing in-depth knowledge, constant supervision and proactive management of all risks and unexpected situations that might arise
from business activities. Internal audits were carried out during 2018, together with periodic monitoring audits by TUV Italia that resulted in obtaining the new versions of the Quality and Environmental certification: UNI EN ISO 9001:2015, UNI EN ISO 14001:2015 and UNI EN ISO 45001:2018 (obtained at the beginning of Year 2019). Tellure Rôta has also obtained NSF/ANSI 2 international certification for wheels in the food sector and DIN EN840 certification for wheels for waste collection bins. The table below lists the certifications obtained and their expiry dates:
Certification
Issuing body
Beginning date
Expiry date
ISO 9001:1994
Quality management systems
ICIM
25/03/1996
-
ISO 9001:2000
Quality management systems
TÜV
25/01/2002
-
ISO 9001:2008
Quality management systems
TÜV
23/03/2009
-
ISO 9001:2015
Quality management systems
TÜV
22/03/2016
18/01/2020
ISO 14001:2004
Environmental management systems
TÜV
14/05/2005
-
ISO 14001:2015
Environmental management systems
TÜV
26/04/2016
17/02/2020
OHSAS 18001:2007
Occupation Health and Safety Management System
TÜV
31/03/2009
21/03/2021
CERTIFICATO
CERTIFICATO
Nr 50 100 1531 - Rev. 09
Nr. 50 100 14613 - Rev. 001
Si attesta che / This is to certify that
Si attesta che / This is to certify that
IL SISTEMA QUALITÀ DI THE QUALITY SYSTEM OF
IL SISTEMA DI GESTIONE SICUREZZA E SALUTE DEI LAVORATORI DI THE OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM OF
TELLURE RÔTA S.p.A.
TELLURE ROTA S.p.A.
SEDE LEGALE E OPERATIVA: / REGISTERED OFFICE AND OPERATIONAL SITE:
SEDE LEGALE E OPERATIVA: / REGISTERED OFFICE AND OPERATIONAL SITE:
VIA QUATTRO PASSI 15 I-41043 FORMIGINE (MO)
VIA QUATTRO PASSI 15 I-41043 FORMIGINE (MO)
SEDI OPERATIVE:/ OPERATIONAL SITES:
VIA A. MORO 21-25 I-41043 FORMIGINE (MO) VIA A. MORO 29-31 I- 41043 FORMIGINE (MO) VIA A. MORO 14 F/G/H I- 41043 FORMIGINE (MO)
SEDI OPERATIVE: / OPERATIVE SITES:
VIA A. MORO 21-25 I-41043 FORMIGINE (MO) VIA A. MORO 29-31 I-41043 FORMIGINE (MO)
È CONFORME AI REQUISITI DELLA NORMA HAS BEEN FOUND TO COMPLY WITH THE REQUIREMENTS OF
LABORATORIO: / LAB:
VIA A. MORO 14 F/G/H I-41043 FORMIGINE (MO)
OHSAS 18001:2007
È CONFORME AI REQUISITI DELLA NORMA HAS BEEN FOUND TO COMPLY WITH THE REQUIREMENTS OF
QUESTO CERTIFICATO È VALIDO PER IL SEGUENTE CAMPO DI APPLICAZIONE THIS CERTIFICATE IS VALID FOR THE FOLLOWING SCOPE
UNI EN ISO 9001:2015
Progettazione, fabbricazione di ruote e supporti per uso industriale, civile e domestico realizzati mediante stampaggio della lamiera, stampaggio dei materiali termoplastici, rivestimento in poliuretano, verniciatura ad acqua e montaggio dei componenti (IAF 17, 14) Design, manufacture of wheels and castors for industrial, institutional, and home applications made by sheet metal press working, injection moulding, polyurethane coating, water-product painting and assembling (IAF 17, 14) Per l’Organismo di Certificazione For the Certification Body
TÜV Italia S.r.l.
Validità /Validity Dal / From:
2018-04-13
Al / To:
2021-03-21
QUESTO CERTIFICATO È VALIDO PER IL SEGUENTE CAMPO DI APPLICAZIONE THIS CERTIFICATE IS VALID FOR THE FOLLOWING SCOPE
Progettazione e fabbricazione di ruote e supporti ad uso industriale, civile e domestico (IAF 17, 14) Design and manufacture of wheels and castors for industrial, institutional and domestic applications (IAF 17, 14) Per l’Organismo di Certificazione For the Certification Body
TÜV Italia S.r.l.
Validità /Validity Dal / From: Al / To:
Data emissione / Printing Date Andrea Coscia
Direttore Divisione Business Assurance
2018-07-06
PRIMA CERTIFICAZIONE / FIRST CERTIFICATION: 2009-03-31 DATA DI SCADENZA DELL’ULTIMO CICLO DI CERTIFICAZIONE: 2018-03-30 CYCLE: 2018-03-30
/ EXPIRATION DATE OF THE LAST CERTIFICATION
“LA VALIDITÀ DEL PRESENTE CERTIFICATO È SUBORDINATA A SORVEGLIANZA PERIODICA A 12 MESI E AL RIESAME COMPLETO DEL SISTEMA DI GESTIONE AZIENDALE CON PERIODICITÀ TRIENNALE” “THE VALIDITY OF THE PRESENT CERTIFICATE DEPENDS ON THE ANNUAL SURVEILLANCE EVERY 12 MONTHS AND ON THE COMPLETE REVIEW OF COMPANY'S MANAGEMENT SYSTEM AFTER THREE-YEARS”
2017-02-07 2020-01-18
Data emissione / Printing Date Andrea Coscia
Direttore Divisione Management Service
2017-02-07
PRIMA CERTIFICAZIONE / FIRST CERTIFICATION: 2002-01-25 “LA VALIDITÀ DEL PRESENTE CERTIFICATO È SUBORDINATA A SORVEGLIANZA PERIODICA A 12 MESI E AL RIESAME COMPLETO DEL SISTEMA DI GESTIONE AZIENDALE CON PERIODICITÀ TRIENNALE” “THE VALIDITY OF THE PRESENT CERTIFICATE DEPENDS ON THE ANNUAL SURVEILLANCE EVERY 12 MONTHS AND ON THE COMPLETE REVIEW OF COMPANY'S MANAGEMENT SYSTEM AFTER THREE-YEARS”
Once again, the Competition Authority renewed the Legality Rating in September 2018 with a score of “ ”. The rating was granted for the first time in October 2014.
Company profile
13
Code of Ethics The Code of Ethics defines the commitments and ethical-social responsibilities of each person involved in the business, with a view to consolidating the reputation of the company and maximising the confidence of all stakeholders. Just a few sound principles guide the actions of the directors, managers, employees and partners of Tellure Rôta. The concepts are summarised below:
• compliance with the law and current regulations in each area; • honesty, transparency, impartiality; • respect for and appreciation of diversity; • confidentiality of information; • protection of the corporate image; • respect for the environment.
14
Company profile
Sustainability Policy When planning strategies, Tellure Rôta considers the economic, social and environmental implications of its activities and complies with the principles of sustainability development and corporate social responsibility, which have been recognised internationally since 1987 with the report of the World Commission on Environment and Development (WCED) and the Europa 2020 strategy of the European Union. Given this premise, the Sustainability Policy has various objectives: • establish clear and measurable Sustainability objectives at the start of each year • check the results achieved periodically and plan actions that guarantee continuous improvement • identify and prevent risks associated with the economic, environmental and social impact of activities and take the opportunities arising from the context in which the business operates • promote research in order to increase know-how and offer innovative products to customers that are both eco-compatible and increasingly effective • comply with the regulations that govern health and safety in the workplace, environmental protection and products • act in a manner that prevents adverse impacts, in accordance with the principle of precaution • take care of employees, doing everything possible to avoid injuries and professional diseases • increase customer satisfaction by continuous improvement over time of the services provided • reduce waste and the production of scrap and rejects, consistent with the principles of the circular economy
• involve and consult employees in the implementation of business activities, encouraging them to take every initiative designed to enhance quality, protect the environment and safeguard health and safety in the workplace • ensure that the system is supported by the periodic and systematic provision of information, education, training and awareness-building activities to all employees and collaborators and, where appropriate, to suppliers, contractors and visitors • share and communicate company policies at all levels internally and to partners and suppliers, working to improve the satisfaction of end customers and to reduce the impact of the products and services supplied to them on the environment and on health and safety in the workplace • prevent environmental and health and safety risks, guaranteeing a clean and efficient working environment • choose recyclable materials wherever possible for the manufacture of products, taking measures designed to save the consumption of resources.
Company profile
15
Sustainability Report The topics covered in this Sustainability Report derive from an internal analysis of materiality that sought to determine which aspects are important and enable the company to continue the creation of value over the short, medium and long term. This analysis was carried out in prior years, but remains valid. Tellure Rôta confirms its commitment to involve all stakeholders in constant constructive dialogue and in a lasting and responsible partnership. The purpose of the Sustainability Report of Tellure Rôta is to communicate values, results achieved and future objectives, with a view to continuous discussion and improvement. As in the past, this document - which is also printed in Italian - is based
on the GRI-G4 guidelines issued by the Global Reporting Initiative. The report provides qualitative and quantitative information about the activities of the company in recent years, concentrating in particular on the results achieved in 2018. The data provided was collected, managed and processed internally. Tellure Rôta has prepared a CSR Report since 2002, so this is the 17th edition. The actions taken and results achieved in implementation of the 2030 Agenda SDGs are listed on page 53.
Sustainability and Innovation networks Since 2009, Tellure Rôta has been a member of a network of firms in the Modena area committed to Sustainability and Social Responsibility: the Club of Modena Firms for CSR, known since 2014 as the “Associazione aziende modenesi per la Responsabilità Sociale d’impresa”. This Association, of which Tellure Rôta is a founding member, brings together 40 firms active in the province - all different in terms of legal form, size
and business sector - that collaborate to hold events and workshops promoting the culture and practices of Corporate Social Responsibility. The company also participates actively in the Innovators Club organised by Confindustria Emilia, which facilitates discussions among entrepreneurs, product managers and leaders in the scientific and academic worlds, including laboratories and research centres.
16
2. Economic Sustainability
Economic Sustainability
17
Results for 2018 This section of the Sustainability Report is the part most closely linked to the financial statements, discussing significant information about the economic and financial position of the company. As in the past, the positive pre-tax results derive from the constant, serious efforts made by all personnel. The fundamental indicators have improved and grown for the ninth consecutive year. The year was marked by sustained commercial activity that resulted in the acquisition of new customers and development and consolidation of the existing distribution partnerships, not least via participation at major Italian and international trade fairs and the induction of a new area manager. The commercial results benefited from the technical quality of the range, the addition of new products
Financial Statements’ Data 2018 (euro)
(both to the general catalogue and to meet the specific handling needs of individual customers) and the recent enhancements made to the production process, which assures high quality output for both large and small volume orders. The automated production processes for the new line that makes wheels with cast polyurethane treads were further adjusted and improved during the year. The net financial position has also improved, due to proper balancing of the working capital requirement with the self-financing generated from operating activities.
2016
2017
2018
28,531,131
29,221,851
29,924,090
Gross operating profit (EBITDA)
2,323,689
2,355,701
2,612,873
Net operating profit (EBIT)
1,162,585
1,072,874
1,328,663
-37,152
110,285
101,257
Net revenues from sales
Net borrowing costs
-
-
-
1,199,737
962,589
1,227,406
850,454
731,540
892,666
Net financial position
-4,886,798
-4,279,628
-3,707,244
Shareholders’ equity
5,723,313
5,957,488
6,424,229
Non-recurring items Profit before taxation Net profit
Economic Sustainability
18
Profit before taxation (thousands of euro) 1,500
1,200
1,200 900 600
873
2014
2015
963
383 281
300 0
880
1,227
191
-193
-300
2010
2011
2012
2013
2016
2017
2018
Net financial position (thousands of euro) 6,000 4,423
5,000 4,000
4,221
3,799
4,121 3,501
3,429
2013
2014
4,886
4,279 3,707
3,000 2,000
2010
2011
2012
2015
2016
2017
2018
Turnover and sales volume The increase in sales was achieved as a result of major technical and manufacturing efforts and a strong sales drive, despite a significant fall in demand during the final quarter. Overall growth was 2.4%; however, considering that sales of wheels for waste collection bins dropped by more than 21%, the rise net of that segment was 5.8%: +5% abroad and +6% in Italy. Products are distributed in 75 countries. The volume decrease was due to changes in the sales mix.
The improvement in sales was principally due to: • acquiring 240 new customers; • strengthening the partnerships with customerdistributors in Italy and the principal European countries; • offering targeted products and services to companies; • adding 455 new products, including specials.
Economic Sustainability
19
Turnover (thousands of euro) 31,000 29,000
27,940
27,000 25,000
23,238
23,000 21,000
28,531
22,149
23,342
29,222
29,924
2017
2018
26,489
20,765
19,000 17,000 15,000 2010
2011
2012
2013
2014
2015
2016
Number of items sold 5,925,834
6,000,000
5,907,938
5,800,000
5,728,851 5,682,657
5,600,000
5,474,197
5,400,000 5,200,000 5,000,000
5,818,467
5,216,536
5,350,287
5,051,019
4,800,000 2010
Turnover (euro)
2011
2012
2013
2014
2015
2016
2016
2017
2017
2018
2018
Italy
13,134,243
13,610,612
14,442,413
Abroad
15,396,888
15,611,239
15,481,677
Total
28,531,131
29,221,851
29,924,090
20
Economic Sustainability
Production and distribution of value added The economic and financial results of the company, summarised in the income statement, make it possible to quantify their direct impact
on the principal categories of stakeholder by calculating the Value Added created and distributed.
Value added production and distribution (euro) Revenues from sales Change in inventories of work in process, semi-finished and finished products Other revenues and income
2016
2017
2018
28,531,131
29,221,851
29,924,090
34,406
29,658
495,799
784,741
229,910
218,946
-
45,618
78,374
Total value of production
29,350,278
29,527,037
30,717,209
Cost of raw, ancillary and consumable materials and goods
11,633,212
12,354,391
12,389,900
-90,432
-318,863
-104,767
6,387,311
5,964,883
6,236,402
Cost of leases and rentals
843,506
861,051
895,625
Other operating expenses
228,920
180,453
190,999
Net borrowing costs
-37,152
110,285
101,257
Impairment
88,779
90,243
146,951
Sub-total of production costs
19,054,144
19,242,443
19,856,367
Gross value added by operations
10,296,134
10,284,594
10,860,842
-
-
-
10,296,134
10,284,594
10,860,842
Operating grants
Change in inventories of raw, ancillary and consumable materials and goods Cost of services
Non-recurring items Total gross value added
Value added (thousands of euro) 12,000 10,000
8,775
8,000 6,655
7,578
7,199
7,509
2011
2012
2013
9,513
10,296
10,285
2016
2017
10,861
6,000 4,000
2010
2014
2015
2018
Economic Sustainability
21
The following elements were considered for each stakeholder: a) Remuneration of work All payroll costs: wages, salaries, social security, pension and insurance costs, severance pay, leaving indemnities and other minor amounts; b) Remuneration of the Public Administration The economic benefit taken by the Public Administration (direct taxes);
c) Remuneration of the business system The depreciation and amortisation of capital investment; d) Remuneration of risk capital Net profit or loss for the year. Total gross Value Added was higher than in 2017, with a significant increase in the remuneration of work.
Distribution of value added among the stakeholders (euro) a) Remuneration of work b) Remuneration of the P.A. c) Remuneration of the business system d) Remuneration of risk capital Total gross value added
2016
2017
2018
8,024,072
8,129,421
8,496,175
349,283
231,049
334,741
1,072,325
1,192,584
1,137,260
850,454
731,540
892,666
10,296,134
10,284,594
10,860,842
8%
Remuneration of the P.A.
11%
Remuneration of the business system
3%
Remuneration of risk capital
78%
Distribution of value added
Remuneration of work
22
Economic Sustainability
Investment
During 2018, the company essentially completed and fully commissioned the investment in tangible and intangible fixed assets commenced in prior years. The programme of investment envisaged in the three-year plan was also pursued.
Investment in 2018, amounting to 713,285 (2.38% of sales), is analysed below: 569,520 euro for automated plant and specific technological installations; 14,155 euro for electronic office machines; 112,075 euro for moulds and tools for products; 17,485 euro for licences and software relating to the integrated management information system.
23
Economic Sustainability
Research and development
The mission to innovate is not just a means to achieve economic and market objectives, but also a higher value to be pursued constantly. In fact, innovation is a “generator of potential� for our products, processes and organisation as a whole.
Tellure RĂ´ta generates innovation both internally (with high-profile technical staff and certified internal laboratory) and externally, via important types of collaboration with Universities, research centres and suppliers. By contrast with prior years, no external contracts were signed during 2018.
2016
2017
2018
Research contracts
23,474
127,401
-
Raw materials for trials and prototypes
20,955
23,024
6,940
9,783
7,213
5,901
Highly qualified employees dedicated to R&D
339,426
321,972
121,444
Technical employees dedicated to R&D
Investment in R&D (euro)
Analysis and trials
381,598
346,814
263,532
Depreciation of R&D equipment
3,666
3,927
1,133
Patent costs incurred for R&D purposes
8,524
12,793
-
787,427
843,144
398,949
Total
24
3. Environmental Sustainability
Environmental Sustainability
25
Production process and environmental aspects Tellure Rôta believes that sustainable management of the environmental aspects of the business is important for the reduction of risks and the improvement of competitiveness in the marketplace. The company tackles this by taking an integrated approach, having implemented an environmental management system compliant with ISO 14001.
As a medium-sized firm active in the mechanical processing sector, Tellure Rôta has both a direct and an indirect impact on various environmental factors, including:
The company strives for continuous improvement in its environmental performance, assessing systematically the significant aspects by periodically monitoring a series of indicators. The consistency of the management system with ISO 14001 is audited annually by independent external firms.
• energy consumption during production;
• consumption of raw materials and intermediate products included in the production cycle;
• generation of scrap and both hazardous and nonhazardous special waste; • consumption of water resources; • generation of direct and indirect emissions due to production and the transportation of goods and personnel.
26
Environmental Sustainability
Consumption of raw materials Tellure RĂ´ta produces wheels and brackets for industrial use, otherwise defined as mechanical components for the movement of apparatus, trolleys, machines etc. These products principally consist of steel, cast iron, aluminium, chemical materials (polyamides and polypropylene) and elastomers (rubber and polyurethane). In addition to their raw materials, products are assembled using other mechanical components: some are standard (bearings, screws, nuts and balls), while others are made to specification.
Each product is designed to achieve the best ratio of material weight to load capacity. To avoid waste and minimise the consumption of raw materials, efforts have been made in terms of product design, the optimisation of models, the standardisation of components and the implementation of “lean production� techniques. The decline in the consumption of raw materials and finished components was, as in the past, partly due to the change in product mix.
Raw materials used (kg) 6,000,000 5,000,000
5,052,075
5,673,290
5,822,613
5,532,673
4,804,940
4,513,375
2017
2018
120,074,527
119,200,834
2017
2018
4,000,000 3,000,000 2,000,000 1,000,000 0 2013
2014
2015
2016
Finished components used (number) 140,000,000 135,000,000 130,000,000
130,925,481
131,514,990
134,667,565
135,995,007
125,000,000 120,000,000 115,000,000 110,000,000 2013
2014
2015
2016
Environmental Sustainability
27
Management of energy
The direct and indirect consumption of energy is the most significant element of the company’s environmental impact, considering the direct connection between the consumption of energy and the production of carbon dioxide emissions. The heavy dependence on energy sources, typically affected by price volatility and high costs, is also a major source of risk. In the context of production by Tellure Rôta, natural gas (for both heating and production) and electricity are the main energy resources used. In particular, the energy mix comprises 61% natural gas and 39% electricity. There was a slight reduction in consumption during 2018 compared with the prior year.
Consumption of energy
2013
2014
The actions taken at year end included: transition to LED lighting in the production departments, rationalisation of certain production processes and introduction of a system for the monitoring of consumption at the three factories and in each department. These measures will further reduce consumption during 2019. The main difference in the environmental impact of using the two sources is essentially the geographical location of the combustion required to obtain the energy: in the case of gas, combustion on site has a direct impact, while the external generation of electricity “shifts” the direct impact elsewhere. This aspect is important when considering the possible effects of production on climate change.
2015
2016
2017
2018
278,588
268,433
304,558
410,087
478,551
477,259
2,634,522
2,742,823
2,866,650
3,260,142
3,288,905
3,223,876
2013
2014
2015
2016
2017
2018
Natural gas
2,925,174
2,818,547
3,197,859
4,305,914
5,024,786
5,011,220
Electricity
2,634,522
2,742,823
2,866,650
3,260,142
3,288,905
3,223,876
Total consumption of energy
5,559,696
5,561,370
6,064,509
7,566,057
8,313,690
8,235,096
Natural gas (cu.m) Electricity (kWh)
Energy mix used (kWh)
28
Environmental Sustainability
Production, management and re-use of waste The production of industrial waste is one of the most significant environmental concerns for production and engineering firms, as the types of waste produced - albeit not really hazardous - require recourse to professional waste management services. Tellure RĂ´ta has developed significant systems for the re-use of waste, principally via its inclusion in the production cycles of other firms; indeed, more than 96% of all waste produced is recycled.
In total, Tellure RĂ´ta produced 1,793 tonnes of waste in 2018, which was 2% less than in 2017, with a significant reduction in paper, plastic, wood and metal packaging waste. Hazardous waste represents less than 4% of the waste produced.
Production of waste by type and method of disposal / recovery (kg)
2013
2014
2015
2016
2017
2018
Paper, plastic, wood, metal packaging sent for recovery
92,500
103,820
105,525
88,358
74,888
65,660
23,400
49,880
40,580
25,260
7,080
13,920
1,662,523
1,776,754
1,816,115
1,709,714
1,549,147
1,511,051
82,615
93,870
119,580
119,735
131,725
132,869
3,675
77
8,158
1,172
1,296
3,447
1,864,713
2,024,401
2,089,958
1,944,239
1,764,136
1,726,947
Aqueous waste sent for filtration
35,030
46,957
35,450
44,570
34,131
35,254
Non-aqueous waste sent for filtration
15,753
18,736
24,776
25,189
30,191
31,138
Total hazardous waste
50,783
65,693
60,226
69,759
64,322
66,392
1,915,496
2,090,094
2,150,184
2,013,998
1,828,458
1,793,339
Aqueous waste sent for filtration Metallic waste sent for recovery Plastic waste sent for recovery Other Total non-hazardous waste
Total waste produced
Environmental Sustainability
29
Waste sent for recovery (t) 2,400 2,200 2,000 1,915 1,800
2,150
2,090
2,014 2,041
1,974
1,828
1,838
1,600
2013
2014
2015
2016
1,756
1,710
2017
2018
Waste sent for recovery
Waste sent for recovery (kg)
1,793
1,918
Total waste
2013
2014
2015
2016
2017
2018
Quantity of waste sent for recovery 1,837,638
1,974,444
2,041,220
1,917,807
1,755,760
1,709,580
Percentage of total non-hazardous waste recovered
98.6%
97.5%
97.7%
98.6%
99.5%
99.0%
Percentage of total hazardous waste recovered
95.9%
94.4%
94.9%
95.2%
96.0%
95.3%
30
Environmental Sustainability
Consumption of water and fuel for transportation The production of wheels and brackets requires minimal water consumption, mostly to top-up the pollution scrubbers in the polyurethane department and in the washrooms. Accordingly, the impact on the available water resources is relatively immaterial in terms of environmental sustainability. Nevertheless, Tellure RĂ´ta considers it useful to report water consumption and monitor the volume drawn from the public supply network every year. Water consumption was lower than in 2017. At present, there are no plans to invest in the reduction of water consumption, as the cost would be high for the limited environmental benefits achievable. The inwards and outwards transportation of materials generates direct emissions from the
combustion of fuel by road vehicles that, for Tellure RĂ´ta, are the principal form of transport. The use of external transport firms and carriers means that it is not possible to calculate reliable and meaningful consumption indices for the transportation of goods purchased and sold. The vehicles of inbound and outbound carriers contribute to the volume of traffic on roads near to the factories, but do not interfere directly with traffic in the residential area. Accordingly, the consumption recorded relates solely to internal vehicle fleet (one truck, one commercial vehicle and three cars). The consumption of diesel is therefore somewhat contained.
Water consumption over time (cubic metres) 4,000
3,080
3,000 2,000
1,164
2,413
2,278
2015
2016
2,286
1,518
1,000 o
2013
2014
2017
2018
Fuel consumption by the vehicle fleet (litres) 21,000
20,141
19,000 17,167
17,000
17,028
17,862
18,140 17,499
15,000
2013
2014
2015
2016
2017
2018
Environmental Sustainability
31
Greenhouse gas emissions Climate change has become a priority for the principal international institutions, given the significant impact that it may have on companies and, therefore, on production systems. This priority was confirmed by the international objectives agreed at the 21st Conference of the Parties (COP 21) held in Paris during 2015. In this glocal context, Tellure Rôta is an industry whose productive activities may affect the climate, but which - at the same time - is committed to monitoring and seeking effective solutions for the transition to a low-carbon model. In terms of the impact generated, Tellure Rôta contributes to the production of both direct and indirect emissions: specifically, the combustion of natural gas and the use of fuel by the company's fleet of vehicles are the principal sources of direct emissions. These are classified by the international standards as “Scope 1 emissions”.
The indirect emissions prevail in quantitative terms, representing 54.3% of the total with 1,107 tonnes of CO2 equivalent produced in 2018. This was 2% lower than in 2017, principally due to the lower consumption of natural gas and electricity. Direct emissions, amounting to 932 tonnes of CO2 equivalent, were unchanged with respect to the prior year. In addition to climate-altering emissions, Tellure Rôta also emits atmospheric pollutants in the form of isocyanates (MDI), volatile organic compounds (VOC) and dust deriving from sandblasting. The level of these pollutants is analysed periodically. To date, all the samples taken have been compliant and below the legal limits. The company ceased to emit ozone-depleting substances in 2015.
The use of electricity in the production departments and offices creates indirect emissions, which are classified as “Scope 2 emissions”.
Climate-altering emissions (tonnes of CO2 eq.) 2,000 1,500 1,000
920
947
988
544
524
594
500
1,119
1,130
1,107
800
934
932
0 2013
2014
2015
2016
2017
Direct emissions
2018 Indirect emissions
32
4. Social Sustainability
Social Sustainability
33
Employees Employees are the soul that animates Tellure Rôta and sets the company apart. They are our wealth and real strength.
employee in terms of understanding the needs of customers and coordinating with each other in a true display of teamwork.
Tellure Rôta is not just a supplier of innovative and technological products, but rather a solution provider for the specific problems associated with each application. This means that the business processes and the proper functioning of each activity depend on the skill of every Tellure Rôta
There were 169 collaborators at 31/12/2018, which was unchanged in total with respect to 2017, but with a different breakdown following the arrival of an administration, finance and control executive, a reduction in white-collar staffing by two and the addition of one blue-collar worker.
Employees by level Executives
Number
Percentage
2
1%
4
2%
White collar
42
25%
Blue collar
121
72%
Total
169
100%
Number
Percentage
164
97%
Apprenticeships
4
2%
Fixed-term
1
1%
Managers
Employees by type of contract Permanent
Number of employees 200 175 150
142
143
2013
2014
165
165
169
169
2015
2016
2017
2018
125 100
34
Social Sustainability
37%
9%
under 30
over 50
Employees by age
18%
36%
between 31 and 40
65% Men
between 41 and 50
Employees by gender
Of these, 97% have a full-time contract and, in order to increase productive capacity, flexibility and respond to market needs, almost 18,000 hours of temporary contract work were employed during the year. Tellure RĂ´ta also respects the categories with protected status defined in Law 68/99, employing 7 people with disabilities. Again in compliance with the regulations, Tellure RĂ´ta does not use child labour as education is recognised to be fundamental for the mental and physical development of each individual. About 73% of employees are over 41 years of age and 61% have been with the company for more than 11 years, confirming the high level of loyalty.
35% Women
Females represent 35% of total essentially in line with prior years.
personnel,
Absences amounted to 6.6% of total worked hours in 2018, up from 5.8% last year. This was due to losing about 1,000 hours due to strikes, related to the renewal of the supplementary internal employment contract, and to an increase in hours lost due to illness. Illness hours accounted for 80% of total absences.
Social Sustainability
Absences
35
2017
2018
77,6%
80,5%
Reason Illness Compulsory/optional maternity
6,4%
4,6%
Injuries
10,1%
4,8%
Strikes
0,0%
4,5%
Marriage leave
0,8%
0,7%
Blood donation
0,2%
0,3%
Leave, Law 104/92 (family reasons)
3,6%
3,7%
Special leave
1,2%
1,0%
100%
100%
5,8%
6,6%
Total hours Percentage of hours worked in the year
Welfare activities For the personal health of the workers, the company offered employees access to a free flu vaccination in 2018, as in the prior year. Along with the provision of free orthopaedic insoles for safety footwear, this initiative seeks to improve health conditions. Tellure Rôta organises a plenary meeting every year to keep employees up to date on the progress of the company. In 2018, family members, friends and pensioners were also invited to the evening, which was spent at the “La Meridiana” club in Formigine. The 2017 Sustainability Report was presented during this happy and convivial event. Special activities were also organised for children throughout the evening. In 2018 Tellure Rôta continued to arrange favourable contractual conditions for all employees: • agreements with Unicredit Banca and Banca Popolare dell’Emilia Romagna (for bank current accounts and loans );
• with AON Spa, an insurance broker, to offer the employees favourable insurance contracts for the house and the car with Genialloyd; • purchasing discounts with 10% off all purchases made on Tuesdays at the Conad Superstore in Formigine. As always, all employees were invited to the Christmas Party, together with many retired collaborators who gladly agreed to spend a few hours together with their former colleagues and the owners of the company. On this occasion, a gift was presented to Patrizia Barbolini in the Sales Office to mark her 40 years of loyal service.
36
Social Sustainability
Learning at Tellure RĂ´ta The training process at Tellure RĂ´ta is organised to provide all workers, regardless of type of contract, with sufficient knowledge to identify potential risks and prevent accidents, thus ensuring an appropriate degree of autonomy in the performance of their duties. Based on these principles and in order to increase the knowledge, skills and awareness of each person, Tellure RĂ´ta organised several specific courses and information campaigns during 2018. Work continued on the consolidation of procedures and work methodologies during 2018, in order to ensure that all persons are educated and trained to work safely on an autonomous basis.
A total of 2,231 hours were dedicated to training in 2018 (+50% compared with 2017). The increases included technical and specific training in each department, an introductory English course and the teaching of Italian to foreigners, while the training hours allocated to quality, the environment and safety were unchanged. The course for managers on Industry 4.0 matters was also significant, increasing their awareness of the smart factory techniques applicable to the various production processes.
Training hours per person by category and gender
2016
2017
By category
Blue collar
19.25
8.73
6.48
White collar
24.50
9.48
30.64
Managers
32.00
27.50
25.25
Executives
1.50
0.00
29.75
Men
27.00
9.43
15.19
Women
12.00
7.30
9.50
Total training hours by subject area
2016
2017
2018
IT
320.0
112.0
48.5
0
0
32.0
By gender
Financial economics
2018
2,219.5
18.0
419.5
Managerial
0
0
296.5
Foreign languages
0
0
216.0
Technical / operational (specific)
Commercial Quality / Environment Lean (5s) Total excluding Safety Safety Grand total
0
0
48.0
285.5
514.5
554.5
74.0
50.5
0
2,899.0
695.0
1,615.0
647.5
770.3
616.3
3,546.5
1,465.3
2,231.3
Social Sustainability
37
Safety and risk prevention The company has adopted an occupational health and safety management system that is certified to comply with the OHSAS 18001:2007 standard. This system is audited every year by accredited external bodies to ensure continued conformity. Constant attention is dedicated to certain fundamental activities, including: • risk assessment and the monitoring of working environments; • maintenance of the safety management system; • information, education and training;
The costs incurred on safety and risk prevention totalled 412,006 euro in 2018, being about 2,500 euro per person. In addition to equipment for the protection of workers, investment mainly related to: - Vertical warehouse with related automation for managing the casting dies used by the automated polyurethane plant - Vertical warehouse for the assembly department - Press lubrication system designed to eliminate the dispersion of oil into the environment
• health monitoring;
- Safety bars and zoning, to restrict the speed of fork-lift trucks
• environmental analysis;
- Exhaust chimneys with sound alarms
• maintenance of infrastructure, equipment and workstations;
The activities started in prior years to improve the health and safety conditions of workers also continued during the year.
• selection and monitored use of PPE (personal protective equipment).
There were 2 additional, but minor, injuries during 2018 and, in fact, the number of days lost fell considerably.
2016
2017
2018
Injuries at work
6
4
8
Injuries while travelling to work
0
2
0
Total injuries during the year
6
6
8
179
247
133
0.43%
0.59%
0.31%
Employee injuries
Working days lost Lost Day Rate
38
Social Sustainability
Union relations Negotiations to renew the supplementary internal employment contract continued throughout 2018 between management and the local union representatives, supported by Confindustria and the Trade Union Organisations. Agreement was reached in December, covering the four-year period 2019‑2022.
In addition to confirming the fundamental importance of proper union relations and compliance with the measures to safeguard occupational safety and the environment, the renewal of this contract included changes to the bonus system, applying new profitability, productivity and quality parameters, with a view to increasing payments in proportion to the growth in turnover and the generation of business profitability.
39
Social Sustainability
Additional benefits were also introduced, with a reduction in canteen costs and the allowance of most favourable treatment terms for advances against severance indemnities and requests for part-time working, in order to meet the needs of employees more closely. In another innovation, it will be possible to convert the bonus into welfare services following the activation of company web platform.
Once again, all employees were given a fuel or shopping voucher worth 108 ₏ as a 2018 fringe benefit, in addition to the welfare voucher envisaged in the national employment contract for workers in the engineering sector.
40
Social Sustainability
Customers The customers served by Tellure Rôta can be divided into three categories: a) OEM firms that produce machines, equipment and apparatus fitted with wheels and brackets. These include the manufacturers of: trolleys for industrial or institutional use, transpallets, forklift trucks, moveable scaffolding, waste collection bins and many other items on wheels. b) major users, including but not limited to the automobile sector, that use many trolleys for internal handling purposes or for lean production.
c) retailers that resell Tellure Rôta’s products to other companies or direct users, including: industrial equipment retailers, specialists in spare parts of transpallets and forklift trucks, hardware wholesalers, specialist distribution chains and wheel specialists (customers specialised in the resale of wheel-related products). Tellure Rôta serves more than 2,000 customers, 70% of which in Italy and 30% in another 75 countries worldwide. A total of 240 new customers were added in 2018.
Monthly number of service complaints 12 11
10.5
10 9
8.8
9.6
9.3 8.0
8 6.6
7 6
2013
2014
2015
2016
2017
2018
Value of customer credits (%) 1.00
0.89 0.74
0.75 0.50
0.45
0.47 0.39
0.32
0.25 -
2013
2014
2015
2016
2017
2018
Social Sustainability
41
Reliability of delivery (%) 100 90 80
84.0 80.4
80.9
81.0 73.4
71.6
2016
2017
70 60 50
2013
2014
2015
To constantly monitor the requirements of the domestic and foreign markets, the internal staff is assisted by the professionalism of: • 20 sales agents in Italy; • 18 sales agents abroad; • Tellure Rôta do Brasil, active since 2000 in Guarulhos-Sao Paulo, whose objective is to develop the South American market. The company uses the following sales quality indicators: • monthly number of service complaints • % credited on sales • % reliability regarding delivery dates. The number of complaints has improved significantly, reaching the lowest level since 2013 due to the progress made over the years and the constant attention paid by all personnel. The quality parameter, expressed as the percentage of customer credits on sales, takes various types of
2018
issue into account: • product code errors • transport disservice • quality problems • commercial agreements The percentage credited on sales has increased as a consequence of specific commercial agreements, rather than because of product quality or service problems. The reliability of delivery has improved with respect to last year, returning to the levels seen in the period 2013-2015.
42
Social Sustainability
Communications A new English and Italian edition of the general catalogue was issued in 2018, updated with the new products available. In addition, a minicatalogue containing products suitable for the food processing industry has been prepared. Several mini-catalogues, customised with the logo of the distributor-partner concerned, have also been issued. An external collaboration has commenced for the promotion of the website on various search engines and a LinkedIn page has been created to increase brand visibility. Tellure RĂ´ta attended many trade fairs during 2018, presenting the company as an experienced partner for the solution of handling requirements, while also
featuring new products. The company attended 3 international trade fairs during 2018 (including Shanghai for the first time) and 4 in Italy. 2018 Trade Fairs LOGIMAT (Stuttgart - 13/15 March) MECSPE (Parma - 22/24 March) CEMAT (Hannover - 23/27 April) INTRALOGISTICA (Milan - 29 May/1 June) R2B (TR Lab) (Bologna - 7/8 June) FARETE (Bologna - 5/6 September) CEMAT ASIA (Shanghai – 6/9 November)
Social Sustainability
43
44
Social Sustainability
Suppliers The company seeks to establish long-term collaborative relationships with suppliers able to: • guarantee excellent quality products and reliable service,
Every 3 years, Tellure Rôta suppliers are requested to answer a questionnaire covering service, quality, environmental sustainability and safety. About 25% of suppliers were monitored in 2018.
• ensure flexible delivery times and batches, consistent with lean production,
Registered and operating offices of suppliers: 91% in Italy, 8% in the EU and just 1% outside the EU.
• comply with the specifications of Tellure Rôta in terms of the safety and health of workers, environmental protection and the prevention of all forms of pollution, while focusing on the steady reduction of the environmental impact of their activities,
About 50% of suppliers are local, based within 100 km, as it is important to consolidate partnerships with firms located in the territory and with a sustainable supply chain.
• collaborate to improve the supply chain, increase value added and develop new products or services.
Sustainability of the supply chain No. of suppliers Suppliers assessed on at least one environmental/social sustainability criterion No. of suppliers located within 100 km
2014
2015
2016
2017
2018
303
310
292
270
269
71
72
72
68
68
159
155
149
136
131
Social Sustainability
45
Community engagement During 2018, Tellure Rôta continued to support certain voluntary Corporate Social Responsibility projects, especially those involving collaboration with the schools. Contact between schools and the world of work can lead to greater awareness of the opportunities that exist in the local area, providing guidance to students for their professional growth and specialisations, while enabling Tellure Rôta to invest in human capital and in the future work force. The various collaborations with schools are detailed below: School-Work Exchange Project • 1 120-hour internship arranged with Istituto Fermo Corni - Modena (May 2018). • 1 160-hour internship arranged with Istituto Fermo Corni - Modena as part of the “Summer work experience” project (June 2018). • Collaboration with the Foundation of ITS Maker continued in 2018, in order to contribute to the development of the school’s education programme. Orientation Project • 1 company visit by second-year students at the Modena Chemistry University in April 2018.
• 1 company visit by classes from Istituto Fermo Corni - Modena in collaboration with the Municipality of Modena on the “Yep Young Enterprise People” (Business Heroes) project, in May 2018. • Participation in the Emilia Confindustria “WorkStudy” project dedicated to upper schools in Modena, in order to give detailed instructions and tasks to the various actors involved in the organisation of internships: school tutors, company contact personnel and students. • Participation in the “Middle School Guidance” project, together with the Municipality of Formigine, the Business Network and the Modena Chamber of Commerce, dedicated to classes of middle-school students (November 2018). Internships • 1 440-hour internship for one student in the second year at ITS Maker (March 2018). • 1 500-hour internship for one student from IAL Modena (February 2018). • 1 200-hour internship for one student from IAL Modena (June 2018).
46
Social Sustainability
Agreements with Research Centres
Collaboration with public bodies
The three-year agreement signed in 2015 with the InterMech-MO.RE. centre at the University of Modena and Reggio Emilia continued in 2018, with collaboration between students on the degree programmes and TR-Lab Test & Research at Tellure Rôta for the promotion of research activities.
Collaboration by Tellure Rôta and other local firms with the administration of the Municipality of Formigine resulted in the formation during 2018 of the 4HUB association, for the implementation and management of the “Hub - Ca’ Bella” project. This will create a centre, to be inaugurated during 2019, for entrepreneurs and firms to promote youth employment, with a view to social innovation and the attraction of talent to firms in the area.
Collaboration with non-profit bodies In 2018, for the fifth consecutive year, Tellure Rôta supported the local “Swimming and Congeniality” initiative. This national sporting event for the disabled, promoted by the Municipality of Formigine, took place on 4 March 2018. Collaboration with the Porta Aperta association continued in 2018, involving the assessment of new support projects to be implemented during 2019. With a view to discussions with local stakeholders, during 2018 Tellure Rôta participated in various joint planning meetings on various CSR matters. As a result of this collaboration, a six-month internship for a vulnerable person was activated in April 2018, together with the Sassuolo Social Solidarity Consortium (CSS).
The highly specialised training facilities, with advanced robotics and IT labs, may well become a point of reference for upper schools and the training organisations within companies.
Social Sustainability
UN 2030 Agenda and Welfare During 2018, the Emilia Romagna Region created a List of Responsible Innovators, being points of reference for future regional action to promote and implement the 2030 Agenda. Tellure Rôta was included in the business section of this list as a consequence of the many CSR projects carried out over the years. In January 2018, Tellure Rôta participated in the “Contract Renewal Communications Campaign” promoted by Federmeccanica, in order to facilitate the widest possible dissemination of the guiding principles underlying the contractual renewal process: Welfare, Training, Performance Bonuses. The activity consisted in interviewing various employees and taking photographs, which were used by Federmeccanica during its AGM and at a number of training and institutional events.
47
Collaboration with Galleria Civica and Archivio Cesare Leonardi Tellure Rôta provided further support for the activities of the Architect Cesare Leonardi Archives during 2018, following sponsorship in 2017 of its “Architecture of Life” retrospective exhibition dedicated to Cesare Leonardi, a major local architect. This designer has used Tellure Rôta wheels to make his “Solids” since 1980. Sustainable mobility Alongside other initiatives promoted by the members of the Club of Modena Firms for CSR, Tellure Rôta promoted the first edition of “Bike to work” in October 2018, which encouraged use of the bicycle as a means of transport for travelling to work.
Investment in community projects (euro)
2016
2017
2018
Economic development
6,517
4,000
11,000
Education and research
2,625
2,289
1,144
0
5,500
1,000
Art and culture Environment Health Social solidarity Total
4,000
-
-
500
324
321
4,384
6,800
1,500
18,027
18,913
14,966
48
Company holiday
Company holiday
49
50
5. Tellure RĂ´ta do Brasil
Tellure Rôta do Brasil
Tellure Rôta do Brasil was established in 2000 in order to serve the South American market. Net sales in 2018 totalled 4,679,051 R$ (1,141,231 Euro at the Bank of Italy’s average exchange rate of 4.10 R$/€), up by about 17% compared with 2017. This growth reflected the general rise in Brazilian GDP, with a recovery in industrial investment from the second half in particular, as well as the ability of the company to develop custom products for customers. Following the legislative and presidential elections, Brazil is experiencing a climate of general confidence and optimism.
51
Despite an adverse and challenging national environment, the reorganisation of the company in recent years has refocused the portfolio of customers and placed an emphasis on high valueadded products. As a result, Tellure Rôta do Brasil has been able to retain several major customers and develop business with others. The production and sale of high value-added products, especially polyurethane products designed to solve problems of ergonomics, manoeuvrability and efficiency in advanced industrial handling, has enabled the company to serve new customers as well.
52
6. Our commitments Our commitments in 2018 Grow revenues by consolidating market share.
Commitment to economic improvement
Increase operating profit before taxes.
Gradually improve the net financial position.
Improve product quality (target: < 8 complaints/month).
Increase productivity by 5%.
Reduce credits on sales (target: < 0.50%).
Improve lead time reliability (target: punctuality >85%).
Commitment to sustainability
Develop and implement new corporate communication tools.
Continue local CSR activities.
Continue collaboration with the Municipality on community support projects.
Improve environmental performance and safety at work.
2018 Actuals
Revenues rose by 2.4% in 75 countries.
Operating profit improved.
Further improvement in the net financial position by more than 600,000 euro.
Objective achieved (6.6 complaints/ month).
Reduction in hours lost, but improvement not yet achieved.
Objective not achieved (0.89%).
Objective not achieved (80.9%).
New 2018 edition of the Catalogue (in Italian and English), minicatalogue for the food processing industry, LinkedIn and participation at 7 trade fairs. Founding member of the Club of Modena Firms for CSR, taking part in all activities.
“Middle School Orientation” Project Founder member of the 4HUB association for development of the “Ca’ Bella” activities Investment in safety of 412,000 euro, being 1.37% of turnover. Improvements in progress.
What we want to do 2019 Objectives Grow revenues by consolidating market share.
Increase operating profit before taxes.
Gradually improve the net financial position.
Improve product quality (target: < 5 complaints/month).
Increase productivity.
Reduce credits on sales (target: < 0.50%).
Improve lead time reliability (target: punctuality >85%).
Develop and implement new corporate communication tools.
Continue local CSR activities.
Continue collaboration with the Municipality on community support projects.
Improve environmental performance and safety at work.
53
7. Tellure Rôta and UN 2030 Agenda The 2030 Agenda defines the international objectives for Sustainable Development up to 2030, specifying 17 macro-objectives (Sustainable Development Goals - SDGs) and 169 specific targets addressing the various dimensions of sustainability.
Adopting a glocal approach, Tellure Rôta has made reference to these 10 SDGs and, in each case, has identified the principal actions taken and the results achieved for each of them, as described in the following table.
SDGs
Action take
Results achieved
Corporate welfare services to increase the purchasing power of employees.
Purchasing discounts with 10% off the shopping bill.
Investment in health and safety in the workplace.
Management system certified OHSAS 18001 and over 400,000€ invested in health and safety at work, equal to 2,500€ per person.
Provision of training to employees.
Total of 2,231 hours of training delivered, equal to 13.2 hours per person.
Collaboration projects with schools and Universities.
6 internships and 2 company visits involving local school students.
Reduction in water consumed by production.
Water consumption was 5% less than in 2017.
Improvement in energy efficiency.
Introduction of a system to monitor energy consumption.
Increase in the value added generated and distributed.
Total gross value added was 5.6% higher than in 2017.
Investment in innovation, research and development.
Investment of 700,000€ in automated plant and equipment and 400,000€ in R&D.
Creation of jobs and steady increase in the number of employees.
169 permanent employees in 2018, up by 19% compared with 2013 (+27 persons).
Investment in the construction/renovation of buildings and plant.
Completion of new roofs for the laboratory and canteen.
Corporate welfare benefits / services made available to all employees.
Agreements with banks and insurance companies for discounts on products / services.
Investment in activities to develop the local community.
Joint project work with other firms to develop the Formigine area, in collaboration with the Municipal Administration.
Protection and enhancement of the local cultural heritage..
Support for the activities of the “Architect Cesare Leonardi Archives”.
Sustainable management of the supply chain.
About 25% of suppliers assessed on at least one environmental / social criterion and 50% located within 100 km.
Reduction of CO2 on Home-Work journeys.
1st edition of “Bike to work”.
Reduction in the impact of the means of transport used for corporate travel.
Reduction in the fuel consumption of the vehicle fleet by 13% compared with 2013.
Projects in partnership with local stakeholders.
15,000€ invested in projects and collaboration with local organisations, addressing the topics of local development, social solidarity and health.
54
8. Tellure RĂ´ta and the GRI (Content Index) Report section
p.
G4-1 Statement from the most senior decision-maker
Letter to the Stakeholders
1
G4-3 Name of the organisation
Who we are
11
G4-4 Primary brands, products and services
Who we are
11
G4-5 Location of the organisation's headquarters
Who we are
11
G4-6 Countries where the organisation operates
Tellure RĂ´ta do Brasil
50
G4-7 Nature of ownership and legal form
Who we are
11
G4-8 Markets served
Who we are
11
G4-9 Scale of the organisation
Summary of 2018
7
G4-10 Employee data
Employees
33
G4-12 Description of the organisation’s supply chain
Suppliers
44
G4-13 Significant changes
Who we are
11
G4-14 Precautionary principle
Production process and environmental aspects
25
endorsed
Community engagement
45
G4-16 Memberships and partnerships
Sustainability and Innovation networks
15
G4-17 List of companies
Who we are
11
G4-18 Process for defining report content
Sustainability Report
15
G4-19 Material aspects
Sustainability Report
15
G4-20 Aspect boundaries
Methodological note to the 2018 Report
56
Methodological note to the 2018 Report
56
periods
Methodological note to the 2018 Report
56
G4-24 Stakeholder groups engaged
Methodological note to the 2018 Report
56
G4-25 Identification of stakeholders
Methodological note to the 2018 Report
56
G4-26 Approach to stakeholder engagement
Methodological note to the 2018 Report
56
G4-27 Key topics discussed with stakeholders
Methodological note to the 2018 Report
56
G4-28 Reporting period
Methodological note to the 2018 Report
56
G4-29 Previous reports
Methodological note to the 2018 Report
56
G4-34 Governance structure
Who we are
11
G4-36 Function responsible for Sustainability Report
Who we are
11
G4-42 Role of owners in defining Sustainability policies
Methodological note to the 2018 Report
56
GRI G4 indicator
GRI G4 - General Standard Disclosures
G4-15 Externally developed sustainability initiatives
G4-22 Restatements of information provided in prior years G4-23 Significant changes from previous reporting
55
Report section
p.
Sustainability Report
15
Sustainability Report
15
Our values
9
Production and distribution of value added
20
Suppliers
44
Consumption of raw materials
26
production cycle by type
Production, management and re-use of waste
28
G4-EN3 Energy consumption within the organisation
Management of energy
27
G4-EN6 Reduction of energy consumption
Management of energy
27
G4-EN8 Total water withdrawal by source
Consumption of water and fuel for transportation 30
G4-EN10 Percentage of water recycled
Consumption of water and fuel for transportation 30
G4-EN15 Direct greenhouse gas (GHG) emissions (Scope 1)
Greenhouse gas emissions
31
Greenhouse gas emissions
31
Greenhouse gas emissions
31
GRI G4 indicator
G4-45 Role of owners in identifying impacts and consultations with stakeholders on Sustainability matters G4-48 Function responsible for assessing the coverage of materials aspects G4-56 Values, principles, standards and codes of conduct Indicators of Economic Sustainability G4-EC1 Direct economic value generated and distributed G4-EC9 Purchases made from local suppliers Indicators of Environmental Sustainability G4-EN1 Materials used by weight and volume G4-EN2 Percentage of materials re-used in the
G4-EN16 Energy indirect greenhouse gas (GHG) emissions (Scope 2) G4-EN20 Emissions of ozone-depleting substances (ODS) G4-EN30 Significant impacts of transporting goods, products and personnel
Consumption of water and fuel for transportation 30
Indicators of Social Sustainability G4-LA1 Number of new hires and turnover
Employees
33
G4-LA2 Employee benefits
Welfare activities
35
G4-LA6 Types of injury and other indicators
Safety and risk prevention
37
G4-LA9 Average training hours by type of employee
Learning at Tellure RĂ´ta
36
Who we are
11
Community engagement
45
G4-LA12 Composition of governance bodies by gender G4-SO1 Operations implemented with local community involvement
56
Methodological note to the 2018 Report The purpose of this Sustainability Report from Tellure Rôta is to describe 2018 performance in economic, environmental and social terms and to inform key stakeholders about the impact generated by the company, with a view to transparency, awareness and dialogue. This document is the 17th edition of a process of inter-sector reporting that began in 2002, with the preparation of the 1st Social Report, and continued from 2009 with publication of the 1st Sustainability Report. As part of improvements consistent with current international Sustainability Accountability practices, the format of the Sustainability Report has been updated in line with the “Sustainability Reporting Guidelines G4” promoted by the Global Reporting Initiative (GRI). Accordingly, the Report adopts the In accordance Core approach to the GRI.G4 standard. In particular, the Report covers all the “General Standards” and the “Specific Standards” that are most significant (material) for Tellure Rôta. With regard to the latter, the Report makes the required Disclosure on Management Approach – DMA and presents at least one related indicator.
The “Materiality Analysis” has not been updated, as there have not been any changes in the prerequisites for identifying perceptions, cross-functional impacts and improvements to be made (the methodology and results of the Materiality Analysis were published in the 2016 and 2017 Sustainability Reports). The scope of reporting coincides with that adopted for the preparation of the financial statements. Tellure Rôta do Brasil became a foreign affiliate in 2013 and is therefore no longer a subsidiary of the company. A specific section of the Report summarises the link between the actions taken by Tellure Rôta and the various UN SDGs. Together with the annual financial statements, the Sustainability Report was examined and approved by the Board of Directors of Tellure Rôta on 27 March 2019.
57
Glossary UN 2030 Agenda for Sustainable Development Document that defines the international objectives for Sustainable Development up to 2030, specifying 17 macro-objectives (Sustainable Development Goals - SDGs) that are divided into 169 specific targets. Analysis of Materiality The objective of this analysis is to identify topics relevant to the sustainability of business and the related reporting. This involves preparing a matrix that combines the importance scores assigned by the company with those indicated by its stakeholders. Environmental aspect Element of the activities, products or services of an organisation that may interact with the environment. Corrective action An action to eliminate the reason for a non-conformity or an undesired situation. Sustainability report A tool for communication and dialogue with corporate stakeholders that seeks to provide information about the economic, social and environmental profile and performance of the company. Preparation is voluntary and supplements the financial statements. In addition to economic data, the Report covers the social and environmental aspects of the company. Cash Flow (Net Financial Position)) The statement of cash flows presents the sources and applications of funds of the company during the period analysed. Cash flow indicates the ability of the company to finance itself and can be calculated with reference to the income statement. Environment Process Certification ISO 14001 This certification confirms compliance with certain environmental management procedures codified at an international level. Certification under ISO 14001 is voluntary and enables the company to improves its environmental management system. Quality Certification ISO 9001 This certification confirms the compliance of all company processes with an impact on product quality, placing an emphasis on continuous improvement and customer satisfaction. Safety Standard Certification OHSAS 18001 OHSAS 18001 (Occupational Health & Safety Assessment Series) is an internationally recognised standard for certifying occupational health and safety management systems. Code of Ethics Declaration of principles and values that guide the daily activities of a business: everyone who participates in the business at various levels must comply with it. The Code of Ethics specifies what the business understands by social responsibility and how the stated principles and values are put into practice in the various productive, commercial and interpersonal activities.
Corporate Governance Corporate Governance comprises the set of management and administrative procedures adopted by a business, from the ownership structure to the organisation and functioning of the Board of Directors, including the relations between the owners and the Board and the management team. The aspects encompassed comprise the composition of the governing bodies, the criteria for selecting directors, the role of independent directors, the transparent functioning of the governing bodies, the protection of non-controlling owners and the system of internal control (including internal audit). The most recent Italian regulation on this subject is Decree 231/2001. GRI (Global Reporting Initiative) This body develops international guidelines for the application of principles and integrated report methodologies in relation to economic, environmental and social sustainability. Environmental Impact Any beneficial or adverse impact on the environment deriving from the activities of an organisation. Incident Event associated with a working activity that results in injury, professional illness or death. Non-Conformity Any aspect (action/behaviour/process) that does not satisfy the specified requirements. No Profit A body or organisation that works without the primary objective of making a profit. Near miss Event associated with a working activity that might have resulted in injury, professional illness or death. Social and Environment Reporting This implies a duty to explain and justify what the company is doing to implement its declarations of principle and comply with the economic and socio-environmental commitments made to stakeholders (customers, employees, suppliers, State and Public Administrations, environment). There are various methods of reporting: the GRI is the authoritative and complete.
58
Corporate Social Responsibility At an international level, Corporate Social Responsibility (CSR) is defined in general by the European Union as “the voluntary integration by businesses of social and environmental concerns in their commercial operations, decision-making processes and relations with counterparties/stakeholders)�. Environmental Management System That part of the management system of an organisation used to develop and implement its environmental policy and managed the environmental aspects of the business. Occupational Health and Safety Management System That part of the management system of an organisation used to develop and implement its occupational health and safety policy and managed the risks associated with its activities. Stakeholder Literally a party with a stake in the business. A group of parties with a direct or indirect interest in the management of the business, given the possible beneficial or adverse effects of its activities. Stakeholders can be employees, customers, suppliers, local authorities, nonprofit associations, research bodies, schools, universities, business associations, trade unions, local communities, the territory and the environment.
Stakeholder Engagement Tool for listening to, discussing with and involving the principal counterparts of a business, with a view to stimulating quality relationships, activating the related listening and satisfaction processes and opening up opportunities for innovative partnerships. Sustainability Development In 1987 the UN defined this as development capable of meeting the needs of current generations without compromising the rights of future generations. The concept refers to development models that seek greater balance between the social, economic and environmental dimensions by promoting a synergy of technologies, standards, responsible behaviour and economic tools and the pro-active collaboration of businesses, civic society and public institutions. Value added This calculation measures the wealth produced by the business during the year, making reference to the stakeholders that participate in its distribution.
60
Suggestions - Comments 2018 Sustainability Report Your opinion is vital in order to assess our work. For this reason, please send us your impressions by filling out this short questionnaire:
Which category of stakeholder do you belong to? Employees Agents Customers Suppliers Lenders Public Administration Local Community
What do you think of the 2018 Sustainability Report? Graphic layout Clarity of content Completeness of information Ability to increase awareness about Tellure Rôta
What do you think about the results for 2018?
Economic standpoint Social standpoint Employees Agents Customers Suppliers Lenders Public Administration Local Community
What do you think about the objectives of Tellure Rôta? Social standpoint Employees Agents Customers Suppliers Lenders Public Administration Local Community
General suggestions for improvement
Contact details
To make suggestions, for assistance with filling out this form or for any other information or questions about the Sustainability Report, please contact: Human Resources: phone +39.059.410241 – e-mail: davide.clo@tellurerota.com. For additional information about the company, please visit our website www.tellurerota.com
Tellure Rôta
TR Lab
Via Quattro Passi 15 • 41043 Formigine (MO) Tel. 0039 059 410231-253 • Fax 0039 059 572859 comm.estero@tellurerota.com • www.tellurerota.com
Via Aldo Moro, 14/G-H • 41043 Formigine (MO) Tel. 0039 059 410271 • Fax 0039 059 573167 info@trlab.it • www.trlab.it
UNI EN ISO 9001:2015
UNI EN ISO 14001:2015
OHSAS 18001:2007