Titanium Alloy Gr 1 Sheets and Plates
Titanium Gr 1 Sheets & Plates is one of the commonly used among all available titanium alloy and is also called as the titanium alloys workhorse. Ti Gr 1 plate is one of the most comply utilized alloy worldwide wherein the alpha-beta alloy is termed as the titanium industry workhorse alloy. The annealing temperature of the Ti Gr 1 sheet is ranging from 700-785 deg C. Ti Gr 1 plate is having very good tensile attributes at the ambient temp and that is advantageous for creep resistance to 300 deg C.
Gr 1 sheets are also considered as the usually used Ti sheets and it accounts for over half of the titanium sponge used into the wide-reaching where the product confirms by the means of chemical and mechanical property. Ti Gr 1 plate is having very good strength, good corrosion resistance. Also, it is heat treatable and is used to a temperature ranging to 400 deg C.
Titanium Gr 1 Sheets & Plates are used in many industrial applications. It is like petrochemicals, pharmaceuticals, constructions, buildings, specialty chemicals, oil & gas processing, food processing, automobile industry, pulp & paper industry, marine applications, etc.
Titanium Alloy Gr 1 Sheets and Plates Manufacturers, Titanium Alloy Gr 1 Sheets and Plates Suppliers, Titanium Alloy Gr 1 Sheets and Plates Stockists, Titanium Alloy Gr 1 Sheets and Plates Exporters
Titanium Gr 1 Sheets and Plates Equivalent Grades
Specification of Titanium Gr 1 Sheets and Plates
Titanium Sheets and Plates Specification : ASTM B265 / ASME SB265
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.