Can You Charge Oculus Quest 2 Controllers?

Source: uetechnologies.com

Unfortunately, the Oculus 2 controller does not have any rechargeable lithium-ion batteries that you can use. Therefore, you will need to change the AA batteries each time it runs dead. However, those that use rechargeable AA batteries might be able to remove the batteries and recharge them.

It is advised that you have numerous rechargeable AA batteries for your controller. If one of them does die out, you don’t have to wait as long as it might take for them to recharge and can simply replace it with a different battery whilst the other is recharging.

The last method involves knowing how do you charge Oculus Quest 2 controllers with a charging dock. One of the best charging docks is the Anker charging dock. The dock is fully approved and licensed by Meta. The dock already comes with rechargeable batteries; you can simply place your controller on the dock for charging. It is one of the best Oculus Quest 2 accessories.

How To Change Oculus Quest 2 Controller Batteries?

Since there are no means of charging these batteries, users should be versed in the design of the controller to help them replace the batteries. After finding my Oculus Quest 2 controllers not working, I knew it had to be the batteries. Tinkering around with an Oculus controller and reading some of the instructions helped me understand how to replace the AA battery:

1. Find The Eject Symbol

Source: beebom.com

One thing you would notice is that the controller features a small eject symbol, which is located in the palm grip of the controller. So, you simply need to take the controller and give it an overview, which would reveal the small symbol.

2. Opening The Battery Compartment

Source: beebom.com

To open the battery compartment, you want to put your thumb on the release button, which is marked by the eject symbol. Once you have found it, you can slowly slide your finger up by applying a little bit of pressure. You should be careful, as the unit can break the connector holding the compartment cover together

3. Replacing The Battery

Source: beebom.com

Once you have removed the cover, you can simply remove the old battery. There are no specific tricks or features to keep in mind. Much like any other controller or household item using AA batteries, they will pop out when you apply a little bit of pressure to either of the sides or the middle.