SENSORS TO PREVENT COVID-19 SmartXcan | Multisensor-TI
About Kentix. Every business is digital business (mission incritical). Kentix GmbH, based in Idar-Oberstein, Germany, is a manufacturer of professional smart building security products for the physical security of business-critical IT infrastructures. Kentix systems offer network-based solutions for every requirement and are suitable for use in all sectors of the economy. With Kentix you can easily increase your IT availability and avoid system failures before they happen.
One simple measure for many applications
SmartXcan.
An automated, safe and intuitive fever measurement at central, preferably electrically controlled, access points to crowds of people is an important measure that has been tested in many high-risk regions, to: • Provide long-term and sustainable protection against viral diseases. • Re-establish social and economic contacts, while at the same time controlling the risk before epidemics flare up. • Restore public confidence in public security. Safe
Intuitive
Quick
SmartXcan
Simple fever measurement in 2 Steps.
Direct feedback on the device
Additional control via WebGUI possible
SmartXcan
Simple user guidance. Focus measuring point – approach head – measurement. This is done intuitively, the measurement is confirmed optically and acoustically within only 0.6 seconds. The whole process of approaching the SmartXcan, measuring and stepping away takes about 3-5 seconds. 1024 sensors measure the temperature at many points of the eyes and forehead. For commissioning, only a network connection with Power over Ethernet (PoE) is required.
SmartXcan
Optional RFID reader integrated. The version with integrated RFID reader (Mifare DESFire) is used to activate and assign the measurement to persons. The persons are created in the user administration accordingly with an RFID token. Each measurement is then actively started by holding the RFID token in front of them. Measurements can then be reported with assignment to the person. The report can be sent by e-mail, SNMP or WebHook. Temperature measurements can also be viewed in the SmartXcan logbook. User administration can also be carried out via LDAP or Active Directory.
System components RFID. Gerät Type Function Max. Number of doors Max. Number of DoorLocks per AccessManager Configuration Smartphone app Radio networkable Standard mortise lock (DIN18252 and DIN 1303) Offline memory in the device Online storage in AccessManager Suitable for external doors (IP66) Suitable for fire protection doors Anti-panic version for escape doors RFID reader expandable on both sides Battery life (years) Battery level message Door thickness RFID Reader MIFARE® Remote opening Arming/disarming Kentix alarm system Maximum number of networkable AccessManager Radio range Door profiles Time profiles (weekday, time of day) Access log Memory Depth Ethernet Power over Ethernet (PoE) IEEE 802.1X authentication Can be integrated into AlarmManager Video recording IP camera (HTTP/S) Sabotage monitored SNMP (V2/V3) LDAP - Active Directory Memory expansion (SD card) Radio frequency Approvals Batteries/power supply Temperature range Size (L x W x H in mm)
DoorLock-LE KXC-LE-XXXX Door Lever with RFID and radio networking One door AccessManager, Programming card x ✓ x 1.000 user ✓ ✓ ✓ ✓ up to 6 years ✓ up to 110 mm Classic®, DESFire® ✓ ✓ approx. 25 m x x x x x ✓ x x x 868MHz CE CR123A 5 °C to 55 °C 30-110
DoorLock-WA KXC-WA1/ KXC-WA1-OUTDOOR Wall Reader with RFID and radio networking One door AccessManager, Programming card x ✓ x 1.000 user ✓ ✓ x x x Classic®, DESFire® ✓ ✓ approx. 25 m x x x x x ✓ x x x 868MHz CE Versorg.-Spann. 8-40V -20 °C to +65 °C 71 x 71 x 26
DoorLock-RA KXC-RA Rack Cabinet Lock with RFID and radio networking One door AccessManager, Programming card x ✓ x 1.000 user ✓ ✓ x x up to 8 years ✓ Classic®, DESFire® ✓ ✓ approx. 25 m x x x x x ✓ x x x 868MHz CE AA Lithium -20 °C to +65 °C 148.4 x 44.6 x 35.9
Measuring Temperature.
10 Person Temperature Sensor Measurement in 43 Seconds.
All-in-One!
Multisensor-TI. Every person releases tiny floating particles – aerosols – into the room air by simply speaking and breathing. These are distributed throughout the entire room after a very short time. A single infected person can transmit his infectious viruses to other people in the room via breathed out aerosols. In the MultiSensor-TI, several intelligent sensors are networked together by means of clever software. These count the number of persons and at the same time measure the air quality according to the IAQ index “Indoor Air Quality”. If the air quality is too bad, the MultiSensor-TI issues a warning and can recommend window ventilation, for example, via a connected monitor. This can quickly reduce the aerosol load in the room and lower the risk of infection for employees, customers and visitors.
Secure
Discrete
Scalable
Multisensor-TI
High-end thermal sensor with 1024 pixels.
With a resolution of 1024 pixels and the two available viewing angles of 40° or 90°, the MultiSenso-TI covers all requirements for optimum adaptation of the monitoring area.
Multisensor-TI
Power over Ethernet and External Connections (system socket).
The sensor is simply integrated into the network via Ethernet with PoE. The configurations are carried out via HTTPS and the integrated web server. In addition, the MultiSensor has a system port with two inputs / outputs for connecting external peripherals or alarms.
People Counting.
Group Counting.
SmartXcan | Multisensor-TI. Solutions focused on prevent COVID-19!
CALL NOW THE LOWEST PRICE | THE SHORTEST DELIVERY TIME THE BEST SOLUTION | IMMEDIATE ATTENTION BY EXPERTS
CALL US
+52 (55) 1204 0430 www.tdm.com.mx arturo.tdm.com.mx arturo@tdm.com.mx