Specialist Tool Solutions
*SPEEDLINE6200 comes with a trolley
• Designed to charge, maintain and recover all types of lead-acid batteries - flooded, gelled and AGM.
• The intelligent charging process allows the charger to be left permanently and safely connected to a battery to provide continuous maintenance once charged.
• Gigalithium Battery Booster Jump Starter Pack.
• The lithium booster is a powerful and ultra-light booster for professional use. Suited for cars, vans or any other 12/24 volt vehicle.
• Longer life span, no maintenance, extremely safe, lightweight.
• 2 x 4 cells Lithium LiFePO4 batteries.
• Cranking Amps: 2000/1000A.
8961211SP
Charge Capacity:
220-240VAC - 50/60HZ
Maintenance Capacity: 2.2-40Ah (6V/12V) Power: 30W
896122425SP
Charge Capacity: 50-450Ah (12V) / 25-230Ah (24V)
Maintenance Capacity: Up to 500Ah
89912247SP
Charge Capacity: 14-150Ah (12V) / 14-75Ah (24V)
Maintenance Capacity: Up To 225Ah
8961238SP
Charge Capacity:
1.2-14Ah (12V) / 1.2-75Ah (12V)
Maintenance Capacity: Up to 120Ah £64.95
•
Gigalithium Booster 12V
• A powerful and ultra-light booster for professional use, suitable for difficult to start vehicles with a 12V battery.
• 2 x 4 cells Lithium LiFePO4 batteries.
• Cranking Amps: 800A. 341200SP £699.00
• Powered by compressed air. The 4 Vortex tanks have a capacity of 20 litres each.
• 1 tank for exhausted fluid
• 1 coolant tank for EV cars
• 2 tanks for antifreeze/coolant
• Provides an effective solution when pressure testing the cooling system to help locate internal and external leaks.
kits.
• Dual-manual valve design, easy operation.
• The whole work process is visible through the fibre glass tanks.
• Support off/on vehicle exchange.
• Large coverage adaptors (covering more than 90% of vehicles on the market).
• Includes 4 x Cooling System Flush Fluids (FCF).
• DAF/Iveco/MAN/Mercedes/Renault/Scania/Volvo plus wide ranging coverage for Plant/Construction/Military and Agricultural solutions.
• Supplied with both standard and sensitive reaction test fluids (100ml).
• Quick connector for use with 315 / 316 / 317 Series Cap Adaptors.
• XL - Combustion Leakage Tester.
• Quick connector for use with 33140000 and 331400V2 cap adaptors.
• For use with SP Combustion Leakage Testers.
• 6 pack.
• The Vibro-Impact Air Hammer has been designed for use on suspension parts, however there are a number of additional applications where its use may prove to be convenient e.g. Seized or rusted nuts/bolts on any part of the vehicle and seized injectors where there is no need to retain the injector for future use.
Pneumatic Vibro Injector
• A new generation of an air powered tool that uses vibrations of 20-30Nm of torque to aid the removal of especially tight or seized injectors.
• The kit comes with a comprehensive range of adaptors (19) to suit Bosch, Delphi, Denso, Siemens and more.
Metal Skin Wedge Tools
• Metal skin wedge tools are useful for levering and moving the ends of sheet metal casing without causing marks and scratches.
Slide Hammer Injector Puller
Heavy Duty slide hammer for removal of Bosch, Delphi, Denso and Siemens injectors.
• Features a flexible u-joint adaptor for access in restricted areas.
• Includes adaptors and hooks to connect to the outside of the injectors reducing the need to strip down the injectors.
Automatic Smoke Diagnostic Machine
• Generates a thick and highly visible smoke with multiple adaptors to help connect the product to most vehicles.
• Working pressure: 1.3 Bar Delivery (0-18PSI).
•
Dual Tank Injector Max Machine
Fuel Types:
• Petrol / Gasoline
• LPG or CNG
• Diesel
• Most refrigerants
Measures (depending on sensors fitted):
• CO 0-10%
• O2 0-21%
• CO2 0-20%
• HC 0-5000ppm
• ACR pressure & temp option
• NO 0-1500ppm (5 gas only)
• Universal piece of equipment for assembling and disassembling struts and coil springs - suitable for Cars, 4WDs and LCVs.
• Includes: GO338 - Upper Bracket for Spring Compressor.
• Compression Force: 2452kg (24500N).
• Dimensions: 1600 x 520 x 300mm
• The rotatable and fixable mounting plate is provided with universal hole division. In addition, the holder between the arms can easily be tilted. Suitable for use with Sykes-Pickavant Coil Spring Compressors.
• For use with GO338, to maintain contact position of the shock absorber top mount with the body.
• For new Ford Ranger all-wheel drive models.
• Professional brake bleeder fully electronically managed and designed with one goal: reliability and robustness.
• Bleeding with adjustment from vacuum 0.5 bar to pressure 4.5 bar (7 to 65 psi).
• Automatic stop when the new DOT drum/can is empty.
• Automatic stop when the bleeder detects an abnormal pressure.
• Works for brake and clutch bleeding.
• Powered from the 12v battery, or an accessory
can be used.
• 39 piece tool kit to aid in the removal of top suspension.
• The go-through design enables the piston rod to be held whilst allowing the nut to be loosened or tightened.
• Covers most popular European, Asian, vehicles.
• On-car solution, for dismantling and installing the rear wishbone / trailing arm bush as fitted onto the nearside of recent Volvo and Ford cars.
• Applications: Ford: Mondeo 07- / Mondeo Estate 07- / S-Max & Galaxy 06-
• Volvo: XC70 & V70 07- / XC60 08- / S60 & V60 10-
Silver Series Presses
• With a preheating oil function, this machine offers exceptional cleaning and fluid replacement in approximately 20 minutes on all modern transmission systems. The machine is capable of servicing Standard ATF, DCT / DSG and CVT Transmissions.
• Includes 2 x Automatic Transmission Flush Kits (FATFKIT).
Mechanical Headlight Beam Testers - MOT Approved
• Features a rotating column with adjustable mirror visor for accurate alignment to vehicle.
• Luxmeter with graduated analogue scale for accurate light intensity measurement.
• Features built in MOT beam checking panel.
• Suitable for all headlight types including Xenon.
• Portable base on 3 wheels (self install only)
• Column height: 1.66m £679.00 02695000
• MOT Approved
• Features a rotating column with adjustable mirror visor for accurate alignment to vehicle.
• Luxmeter with graduated analogue scale for accurate light intensity measurement.
• Easily adjustable vertical sliding mechanism by self lubricating sliders.
• Features built in MOT beam checking panel.
• Suitable for all headlight types including Xenon.
• 3.7 metre rail kit / column height: 1.66m
• Base mounted on double rail for ease of use (self install only)
Suitable for
Motorq Push-Thru Professional Torque Wrenches
• 2/3 Leg Self-Centering Puller with handle to aid the opening and closing of the legs.
• Hexagonal headed spindle.
• Greater extraction capacity due to the design of the jaws.
• Forged Jaws.
• Reversible jaws - can be used internally or externally.
Hydraulic Puller / Separator / Extractor Kit
Combines 15510500 and 19310500 to make the most comprehensive set of pulling, separating and extracting options available.
19310500
• Includes 7 split collets, slide hammer, bearing extractor and puller options.
• Min – Max External Bearing Size: 10-105mm
• Min – Max Internal Bearing Size: 6.5-38mm
• Max External Reach: 876mm
15510500
• Makes 8 different twin/triple leg pullers
• Min – max spread: 50-250 mm
• Max reach: 250mm
• Hex head makes it possible to increase pre-load capability up to 4 tonnes (with the use of a 30mm wrench).
• Includes a 2” extension
• Diameter: 1.1/2”.
• Thread: 16tpi Whitworth.
Hydraulic Puller & Separator Kit
•
• Provides maximum withdrawal force of 80kN. •
•
• Makes 4 different twin / triple leg pullers plus a bearing separator kit.
• Min-Max Puller Spread: 50-150mm
• Max Puller Reach: 150mm
• Min-Max External Bearing Size: 20-105mm
• Max External Reach: 876mm
• Kit for assembling, disassembling, cleaning and restoring the thread of the NOx sensor / lambda sensor seat.
• Sizes: M20, M22, M24, M26
• Length: 1875mm
• Height: 1898mm
• Tilting Table: (±3°)
• Power Supply: 6/8 bar
Wheel Bearing Tool Set
GO015
• Complete set of mounting and dismounting wheel bearing and for assembling of hubs.
• Use with screw M20 (supplied) or with 17tonne hydraulic cylinder (long spindle required).
• For universal use on vehicles ranging from passenger cars to LCVs.
• 70-90mm Outer Diameter.
£880.30
Heavy Duty Induction Heaters
• Induction heating is a non-contact method that can be used to heat metals. The induction heater creates field that generates induced currents within the material. It is these induced currents that generate heat.
Induction Heater 3.5kw GO1474 £2199.00
Hub Puller & Drive Shaft Kit GO065
• Universal kit for pressing out, pulling in and separating drive shafts as well as disassembling/ assembling wheel hubs.
• Suitable for vehicles such as SUVs and LCVs with an M14 wheel attachment and bolt circle of up to 136mm. £1568.60
• This kit ensures a strong flange connection with the hub and is also suitable for systems with wheel nuts and / or bolts. The user is not bound to the diameter of the hub edge since the hubs flange is placed 80mm or 90mm in front of the hub.
• 1 x spacers kit M14 x 1.25 L = 80 mm.
• For use with GO065.
