Installation guidelines
Please read these instructions carefully before starting installation. Failure to follow these instructions may result in damage to the product or property.
Installation should be carried out by qualified personnel only. If you are not confident with any part of the installation process, please contact a professional installer for assistance.
The manufacturer is not responsible for any damage caused by incorrect installation or misuse of the product.
Please check all parts and tools are included before installation. Ensure the parts and tools are suitable for the product’s weight and size. Ensure the mounting surface is suitable for the product’s weight and size.
Always use appropriate safety equipment and take necessary precautions when working with tools and electricity.
These instructions are provided as a guide only. Actual installation may vary depending on specific circumstances and site conditions.
Required Tools
• Drill With Drill Bit
• Bubble Level
• Screwdriver Drill
• Pencil
• Mounting Glue
• Vacuum Cleaner
E-mail: support@signage-group.com
Phone: +49 (0)30 863280590
Opening hours: Mon. - Fri., 9:00 - 17:00 Uhr
Office address:Bogen 45, Holzmarktstr. 15-18 10179 Berlin Germany
Step 1
Place the raceway on the wall and level it using a bubble level.
Step 4
Place the unscrewed part of the raceway on the marked position on the wall and mark the screw hole positions with a pencil. Repeat this step for the second raceway.
Step 2
Mark the raceway position on the wall with a pencil.
Step 3
Remove the raceway from the wall. Unscrew it using a screwdriver drill – the screws are located on the top and bottom of the raceway.
Step 5
Remove the raceway from the wall. Drill holes in all the marked spots.
Step 6
Screw the raceways back together using the side screws.
Step 7
Screw the metal rods into the raceway.
Step 10
Insert the metal rods into the glued holes, Hold and wait until the glue sets.
Step 8
Clean the holes from dust using a vacuum cleaner.
Step 9
Apply mounting glue into the drilled holes.