PVC Base [Standing] Rev 3 Eng

PVC Base [Standing] Installation guidelines

©2025 All rights reserved

Eng

Please read these instructions carefully before starting installation. Failure to follow these instructions may result in damage to the product or property.

Installation should be carried out by qualified personnel only. If you are not confident with any part of the installation process, please contact a professional installer for assistance.

The manufacturer is not responsible for any damage caused by incorrect installation or misuse of the product.

Please check all parts and tools are included before installation.

Ensure the parts and tools are suitable for the product’s weight and size.

Ensure the mounting surface is suitable for the product’s weight and size.

Always use appropriate safety equipment and take necessary precautions when working with tools and electricity.

These instructions are provided as a guide only. Actual installation may vary depending on specific circumstances and site conditions.

Required Tools • •

Screwdriver Drill Screws

E-mail: support@signage-group.com Phone: +49 (0)30 863280590 Opening hours: Mon. - Fri., 9:00 - 17:00 Uhr Office address:Bogen 45, Holzmarktstr. 15-18 10179 Berlin Germany

2

Step 1

Step 2

Step 3

Place the letters on an elevated surface for easier installation. Locate the mounted pegs on the bottom of the letter.

Align monted pegs with the holes in the base plate.

Attach the base plate using screws and a screwdriver drill. Make sure the letter is tightly fixed to the base.

Step 4 Place the product on the floor, making sure it stands on a flat surface and in a location protected from the wind.

3

4