MK-15 IDC –E

SWORD IDC-E SPECIFICATIONS

5.56 X 45 nato

The Individual Duty Carbine-Enhanced (IDC-E) is based on the SWORD Defense Systems Mk-15 IDC in 5.56×45. The IDC-E comes equipped with the full implementation of upgrades developed during our PURG-E project. The IDC-E boasts SWORD’s proprietary shortstroke gas piston system and is one of the most accurate and softest shooting piston guns found on the market today. With the addition of the M855A1 to the DoD inventory, program officers and weapons maintenance personnel have noted higher rates of malfunction and critical failures of components on existing program-of-record weapons. SWORD Defense Systems has addressed this problem by reinforcing critical components and adjusting the gas system to address the higher pressures generated by the U.S. Military’s new round. SWORD Defense Systems is proud to offer the IDC-E model, which is a nearly indestructible rifle that reliably functions with both legacy and new ammunition, providing a degree of accuracy not found on the market today.

The Sword Defense Systems IDC-E is offered in 5.56×45.

SWORD IDC-E | MK15 SPECIFICATIONS

Caliber Operating Principle

5.56 x 45 NATO (Optimized for M855, M855A1)

Short-stroke gas piston and push rod system Rated action spring (Included)

Bolt system Enhanced rotating bolt featuring reinforced material as well as radius applied in critical areas. The bolt also features a driving band ride surface and lubrication groove which provides far less flex than a standard ring style bolt configuration. Our new ultra-light bolt carrier is incredibly durable despite its weight savings, boasting reduced unlocking and perceptible recoil impulse. All bolt and carrier components are compatible with select fire systems Coatings: Bolt/Extractor - DLC, MPI tested Carrier - DLC

DIMENSIONS

Length Stock Extended: 32.25″ (81.91cm) at 12.5″ Barrel Length Stock Retracted: 29″ (73.66cm) at 12.5″ Barrel Length

Barrel Length

Barrel Length 12.5” (31.75cm) & 14.5” (36.83cm) Cold Hammer Forged All barrels come standard with pin over the extractor

Weight 6.8 lbs | 3.08 kg– at 12.5″ Barrel Length

OTHER

Upper Receiver Flat-Top with M4 feed ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized

Muzzle Thread ½” X 28

Muzzle Device Flash hider Or Customer Requested Suppressor Adaptor

OPTIONS

• Back up iron sights • Scopes and mounts • Suppressors (User Preference - CGS, OSS, SureFire, KAC)

Note: Mil-Spec bolt, firing pin, extractor, ejectors, and cam pin are all compatible in the PURG-E system as a back-up solution in case of loss or damage during deployment, or for use in-extremis.