Filtration leadership in filtration iso 16890 the new standard for classifying air filters. the new iso standard tests a filter’ s ability to capture particulate from across the range. part 1: technical specifications, requirements and classification system based upon particulate matter efficiency ( epm)? iso 16890 is valid from the beginning of, so now is iso 16890 pdf the time to act. iso 16890 new standard for classiying air filters for over 20 years en779 has been the most used standard for classifying air fi lters for coarse and fi ne dust particles. iso 16890 tests filter efficiency for clean and conditioned efficiency, for pressure drop and for test dust capacity. isoall parts) refers to particulate air filter elements for general ventilation having an epm1 efficiency less than or equal to 99 % when tested according to the procedures defined within iso 16890■ 1, iso 16890■ 2, pdf iso 16890■ 3 and iso 16890■ 4.
under en779, the efi ciency of an air fi lter was assessed as an average value calculated by means of loading steps with a synthetic laboratory dust. iso 16890 consists of the following parts, under the general title air filters for general ventilation:? isoair filters technical and 1: for general ventilation — specifications, requirements classification system based upon particulate matter efficiency ( epm). iso 16890 is the relatively new international standard for testing filters for particle removal. part 2: measurement of fractional efficiency and air flow resistance? this test method is very similar, but not identical, to ansi/ ashrae standard 52. particulate comes in all diferent sizes— much of it invisible to the eye.