Congratulations and thank you for purchasing Warhorse 1-6x24. This first focal plane LPVO is packed with premium features and high quality glass to provide you with an unparalleled close to mid range experience.
Features include:
34mm tube
First Focal Plane (MOA or MIL) reticle
1-6x magnification range
Push/pull elevation turret
Zero reset elevation
Capped windage turret
Included flip caps and throw lever
Elevation Turret
Objective Lens
Precision Leveling Line
Fast Focus Diopter Ocular LensWhen your Warhorse is mounted, make sure to adjust your rear diopter for optimized reticle clarity. Out of the box, the diopter ring will be tightened all the way down, but this is not the optimal position for everyone. To adjust the diopter, spin the ring counterclockwise until the reticle is in focus.
Fast Focus Diopter
The included throw lever is intended for easy magnification adjustments.
1. To begin the mounting process, unscrew the throw lever set screw with the included 5/64” hex key.
2. Place throw lever over magnification ring in your desired position.
3. Using the hex key, tighten down the set screw.
The throw lever uses a friction mounting style, there are no grooves to fit in so you can place it in any location on the magnification ring.
Warhorse includes 12 illumination settings. Each setting is optimized for certain lighting conditions.
-Settings 1 and 2 are for NV device compatibility.
-Settings 3 to 5 are for low-light applications.
-Settings 6 to 10 are for indoor and overcast lighting applications.
-Settings 11 and 12 are for daylight bright conditions.
To use the illumination adjustment knob, rotate the turret clockwise or counterclockwise until you reach the optimal setting for current lighting conditions. Intermittent off settings are included between every illumination setting helping extend the life of the battery when the scope is not being used.
Warhorse uses a side loaded single CR2032 battery, which is provided with the scope.
To install the battery:
1. Using the side fin of the S-wing tool, unscrew the battery cap by rotating counterclockwise.
2. Place the CR2032 battery with the positive side facing outwards in the battery compartment.
3. Put the battery cover on and rotate clockwise until tight. (DO NOT over torque the battery cap)
In order to preserve battery life, be sure to leave your illumination in an off setting when not in use.
Leaving your illumination on high settings will quickly drain the overall brightness.
Warhorse features a capped windage turret and a push/pull locking elevation turret with zero reset capability. Both windage and elevation turrets use 0.25 MOA or 0.1 MIL adjustments. The elevation turret has a total of 150 MOA or 43.63 MILs max adjustment range while the windage turret has a total of 100 MOA or 29.08 MILs max adjustment range. You will notice a tactile “click” noise and feel it when adjusting.
To adjust elevation, pull up on the turret cap to unlock, then make necessary adjustments. Once complete, push the turret cap down to lock.
To adjust windage, remove the protective cap by rotating counterclockwise. Once removed, rotate the windage turret to make necessary left/right point of impact adjustments. Once the necessary adjustments are made, screw on the cap until hand tight.
This feature is intended to reset the baseline zero point on your elevation turret after you have sighted the scope in for better ease of adjustment.
1. Push turret into locked position.
2. Use the fin on the included S-wing tool to spin the turret locking screw counterclockwise on the elevation
3. With the turret locking screw removed, pull the turret off the optic body without turning it.
4. Find the “0” indicator on the turret cap and place directly aligned with the rotation indicator at the base of the turret on the optic body.
5. Make sure the turret is in the lock position, then place the turret locking screw onto the turret cap.
6. Using the side fin on the S-wing tool, tighten down until hand tight.
Before cleaning your optic, ensure that your firearm is unloaded and always use eye protection.
Begin by blowing off any dust or debris on the lens to prevent scratching. Then use a microfiber cloth to remove any dust, oil, or water that is affecting the performance of the optic.
Your Swampfox product is protected under warranty from any manufacturing or material-based defects.
If the product suffers any damage that compromises the performance, we will repair or replace it. This does not include intentional or cosmetic damage to the optic as well as lost or stolen optics. See
https://www.swampfoxoptics.com for more info.
LENGTH:
MAGNIFICATION
WEIGHT:
TUBE DIAMETER:
OBJECTIVE LENS DIAMETER:
EXIT PUPIL:
EYE RELIEF:
FIELD OF VIEW AT 100 YDS:
CLICK VALUE:
TOTAL ELEVATION/WINDAGE ADJUSTMENT:
LENS COATING:
ILLUMINATION:
WATERPROOF:
SHOCKPROOF:
10.08” 1-6x 23.37OZ 34MM 24MM
7.7mm(1x) - 3.7mm(6x)
3.43”(1x) - 3.50”(6x)
105.68 ft (1x) - 18.32 ft (6x)
0.25 MOA/ 0.1 MIL per click
150 MOA Elevation | 100 MOA Windage
Anti-scratch, anti-fog, hydrophobic, fully multi-coated
12 illumination settings, 2 daylight bright, 2 NV compatible, 1 CR2032 battery
IPX7 1100GS