Tomahawk II Product Manual

SWAMPFOXOPTICS.COM

TOMAHAWK II Congratulations and thank you for purchasing Swampfox’s second generation Tomahawk. The Tomahawk II is a complete overhaul in every way from the new second focal plane BDC reticle to the upgraded windage and elevation turrets.

New features include: Push/pull elevation turret with zero reset Capped windage Optimized rear diopter Shorter and slimmer profile housing 12 illumination settings Expansive field of view

3

TOMAHAWK II Elevation Turret Objective Lens Illumination Turret

Battery Cap Fast Focus Diopter

Precision Leveling Line

Capped Windage Turret

Magnification Adjustment Ring Ocular Lens

4

FAST FOCUS DIOPTER

When your Tomahawk II is mounted, make sure to adjust your rear diopter for optimized reticle clarity. Out of the box, the diopter ring will be tightened all the way down, but this is not the optimal position for everyone. To adjust the diopter, spin the ring counterclockwise until the reticle is in focus.

Fast Focus Diopter

5

THROW LEVER

The included throw lever is intended for easy magnification adjustments.

1. To begin the mounting process, unscrew the throw lever set screw with the included 5/64” hex key.

2. Place throw lever over magnification ring in your desired position.

3. Using the hex key tighten down the set screw.

The Throw lever uses a friction mounting style, there are no grooves to fit in so you can place it in any location on the magnification ring.

6

RETICLE ILLUMINATION Tomahawk II includes 12 illumination settings. Each setting is optimized for certain lighting conditions.

-Settings 1 and 2 are for NV device compatibility.

-Settings 3 to 5 are for low-light applications.

-Settings 6 to 9 are for indoor and overcast lighting applications.

-Setting 10 to 12 are for daylight bright conditions.

To use the illumination adjustment knob, rotate the turret clockwise or counterclockwise until you reach the optimal setting for current lighting conditions. Intermittent off settings are included between every illumination setting helping extend the life of the battery when the scope is not being used.

7

POWER Tomahawk II uses a side loaded single CR2032 battery, which is provided with the scope.

To install the battery: 1. Using the side fin located on the S-wing tool, unscrew the battery cap by rotating counterclockwise.

2. Place the CR2032 battery with the positive side facing outwards in the battery compartment.

3. Put the battery cover on and rotate clockwise until tight. (DO NOT over torque the battery cap) In order to preserve battery life, be sure to leave your illumination in an off setting when not in use.

Leaving your illumination on high settings will quickly drain the overall brightness.

2

8

3

TURRET ADJUSTMENT

Tomahawk II features a capped windage turret and a push/pull locking elevation turret with zero reset capability. Both windage and elevation turrets use 0.5 MOA adjustments. The elevation turret has a total of 160 MOA max adjustment range while the windage turret has a total of 120 MOA max adjustment range. You will notice a tactile “click” noise and feel it when adjusting.

To adjust elevation, pull up on the turret cap to unlock then make necessary up/down point of impact adjustments. Once complete, push the turret cap down to lock.

9

WINDAGE ADJUSTMENT

To adjust windage, remove the protective cap by rotating counterclockwise. Once removed, rotate the windage turret to make necessary left/right point of impact adjustments. Once the necessary adjustments are made, screw on the cap until hand tight.

10

ZERO - RESET

This feature is intended to reset the baseline zero point on your elevation turret after you have sighted the scope in for better ease of adjustment.

1. Push turret into locked position 2. Use the fin on the included S-wing tool to spin the turret locking screw counterclockwise on the elevation turret.

3. With the turret locking screw removed, pull the turret off the optic body without turning it.

1

2

3

11

ZERO - RESET

4. Find the “0” indicator on the turret cap and place directly aligned with the rotation indicator at the base of the turret on the optic body.

5. Make sure the turret is in the lock position, then place the turret locking screw onto the turret cap.

6. Using the side fin on the S-wing tool, tighten down until hand tight.

4

12

5

6

CLEANING

Before cleaning your optic, ensure that your firearm is unloaded and always use eye protection.

Begin by blowing off any dust or debris on the lens to prevent scratching. Then use a microfiber cloth to remove any dust, oil, or water that is affecting the performance of the optic.

DEFECT WARRANTY

Your Swampfox product is protected under warranty from any manufacturing or material-based defects.

If the product suffers any damage that compromises the performance, we will repair or replace it. This does not include intentional or cosmetic damage to the optic as well as lost or stolen optics. See https://www.swampfoxoptics.com for more info.

13

1-4X24 VARIANT SPECIFICATIONS

LENGTH: 9.57” WEIGHT: 20.59 oz TUBE DIAMETER: 30mm OBJECTIVE LENS DIAMETER: 24mm EXIT PUPIL: 10.4mm(1x) - 6.0mm(4x) EYE RELIEF: 3.23”(1x) - 3.10”(4x) FIELD OF VIEW AT 100 YDS: 134.2 ft (1x) - 34.03 ft (4x) CLICK VALUE: 0.5 MOA per click TOTAL ELEVATION/WINDAGE ADJUSTMENT: Windage: 120MOA | Elevation 160MOA LENS COATING: FMC/ Anti-fog/Hydrophobic ILLUMINATION: 12 Position Illumination turret with intermittent Off settings RETICLE: Red or Green BDC | Glass Etched Illuminated WATERPROOF: IPX7 SHOCKPROOF: 1100 G Force 14

SWAMPFOX OPTICS INC. support@swampfoxoptics.com