Raider Product Manual

TABLE OF CONTENTS INTRODUCTION IN THE BOX MEASUREMENTS BATTERY INSTALL POWER ON DIOPTER BRIGHTNESS THE BRC RETICLE WINDAGE & ELEVATION MOUNT OPTIONS CHANGING MOUNTS WARRANTY

1 2 3-4 5 6 7 8 9-10 11-12 13 14 16

RAIDER 1X PRISM Introducing the Swampfox Raider, a versatile 1x Micro prism with expansive eye relief for fast and clear sight acquisition. Our Bullet Rise Compensation (BRC) reticle returns giving you every advantage anywhere from 5 to 200 yards. The Raider comes standard with a T2 footprint capable of mounting to all your favorite risers and mounts. Motion sensing Shake N' Wake auto on/off helps save battery life and is perfect for home defense applications.

Elevation turret Brightness up/down buttons

Honeycomb anti-reflection cover

1

CR2032 battery compartment

IN THE BOX • Lens covers • 1.1” and 1.6” mounts • Honeycomb anti-reflection cover • S-wing wrench • T25 L wrench • Microfiber cloth

2

MEASUREMENT ILLUSTRATION B

A

D

3

C

A

56.4mm

2.22 inches

B

65.68mm

2.59 inches

C

52mm

2.05 inches

D

27.94mm

1.1 inches

MEASUREMENT ILLUSTRATION

B

A

A

68.91mm

2.71inches

B

73.24mm

2.88 inches

C

52mm

2.05 inches

D

40.64mm

1.6 inches

C

D

4

INSERTING & CHANGING THE BATTERY Raider uses a CR2032 3V battery which is included in the box, but not pre-inserted into the optic.

1. Turn the battery cover counter-clockwise to remove it.

2. Insert the battery with the “+” side facing away from the scope body.

4. Turn the battery cover clockwise to close it. Tighten until tight, there is no need to torque down on a battery.

5. Confirm that the optic powers on by pressing the brightness UP button 6. Regardless of how often you are using Raider, we recommend you replace your battery annually.

CR2032 BATTERY BATTERY CAP

5

POWER ON • On / Off • Press the brightness UP button to power on.

• Hold the brightness DOWN button for 3 second to manually power off.

When the sight is powered back on, it will automatically return to the previous brightness level.

RETICLE BRIGHTNESS DOWN

RETICLE BRIGHTNESS UP

6

RETICLE AND DIOPTER In order to precisely tune Raider to your eyes, a diopter ring is set at the rear of the optic for adjustment. To adjust the clarity, rotate the diopter counterclockwise until the reticle and sight picture are in focus.

Raider’s advantages compared to standard red dots: • Raider presents a clear and crisp etched reticle, which makes it perfect for users with a common astigmatism. The etched reticle appears black with illumination off, making it usable with a dead battery or even without a battery.

• Field of view is also superior with Raider, coming in at 70.7’ of visibility at 100 yards

Rear Diopter

7

BRIGHTNESS • Raider is equipped with 10 brightness settings. The two lowest settings are passive aiming compatible with night vision devices. and brightness DOWN buttons to adjust • Use the brightness UP brightness level.

• When using low brightness settings ensure sufficient contrast against the target.

• Medium brightness settings are ideal for indoor shooting ranges.

• The highest two brightness setting are daylight bright and should only be used in very bright conditions to avoid unwanted glare.

Brightness Down Brightness Up

8

THE BULLET RISE COMPENSATION RETICLE Raider’s Bullet Rise Compensation (BRC) reticle is optimized for close quarter engagements while also allowing for mid range precision.

A

RETICLE SUBTENSIONS A

CIRCLE DIAMETER

102 MOA

B

TRIDENT LINE WIDTH

2 MOA

C

HOLDOVER DOT SIZE

6 MOA

D

CIRCLE LINE WIDTH

6 MOA

E

TRIDENT & GAP ANGLE

90°

9

B

C D E

THE BULLET RISE COMPENSATION RETICLE The BRC reticle is broken down into the following holds when mounted on an AR 5.56/.223 platform. The holds may vary when mounted on other platforms due to differences in projectile weight and velocity.

BRC HOLDOVERS

A B C

D

A

ZERO

50/200 YARDS

B

11 MOA

15 YARDS

C

20 MOA

10 YARDS

D

45 MOA

5 YARDS

10

WINDAGE AND ELEVATION ADJUSTMENTS Raider’s windage/elevation turrets are located on the top and right side of the optic, sitting flush with the optic housing. The reticle will be set at a neutral position dead set in the middle, allowing for an easy zeroing experience. The Raider has a total range of 90 MOA for both windage and elevation travel, with a reticle adjustment of 1 MOA per click.

Elevation Turret

Windage Turret

11

WINDAGE AND ELEVATION ADJUSTMENTS Sight in your Raider so that the Point of Impact (POI) matches the center aiming point of the reticle at your chosen distance. Remember, the adjustments below describe the adjustment of your POINT OF IMPACT. Don’t worry about which direction the reticle is moving internally.

ADJUST THE POINT OF IMPACT UP OR DOWN Turn the elevation turret counter-clockwise to move the POI up Turn the elevation turret clockwise to move the POI down

ADJUST THE POINT OF IMPACT LEFT OR RIGHT Turn the windage turret counter-clockwise to move the POI right Turn the windage turret clockwise to move the POI left

12

MOUNTING OPTIONS Raider features a T-2 footprint and multiple mounting options in the box. We wanted to create an incredibly versatile optic fit for all your needs and mounting options. Included in box, you’ll have a 1.1” flush and a 1.6“ standard centerline mount. 1.93” mount is sold separately.

1.1” MOUNT

13

1.6” MOUNT

!

1.9” MOUNT SOLD SEPARATELY

Before Installation: confirm the firearm is unloaded and in a safe operable condition.

Always use eye and ear protection.

CHANGING MOUNTS 1. Use the supplied wrench or a T10 Torx bit to remove the four screws securing the mount to the optic housing 2. Attach the other included mount or any industry standard T1 compatible mount to the bottom of the scope body.

3. Apply blue threadlocker to the screws, and torque to no more than 15 inch-pounds.

14

THE HONEYCOMB ANTI-REFLECTION DEVICE The included “honeycomb” anti-reflection device screws onto the front objective side of the Raider. It will help prevent glare from sunlight or weapon light use and helps prevent the red or green reticle illumination emitter from being seen.

MAINTENANCE Before cleaning your optic lenses, make sure to blow away any dust or grit on the lens to prevent scratching. Always use a microfiber cloth when cleaning your lens.

15

WARRANTY Your Raider 1x Prism is backed by the Swampfox Optics 50,000 Round Guarantee. No, we’re not tracking your round count. We’ll go by the warrior code and your best estimation on whether or not the optic failed prior to using it for at least 50,000 rounds. If something goes wrong and your Swampfox product no longer performs as intended, contract us by email at support@swampfoxoptics.com or visit support.swampfoxoptics.com online. Tell us what happened, and we will determine whether to repair or replace your optic. The 50,000 Round Guarantee cannot cover loss or theft, cosmetic damage, or intentional abuse

16

SWAMPFOX OPTICS INC. support@swampfoxoptics.com swampfoxoptics.com