Sienna COVID-19 Rapid Test Instruction & Usage

Usually, a medical general handles the Sienna COVID-19 rapid antigen test in a testing facility. However, under the supervision of a trained healthcare professional, an individual can apply the procedure following the instructions given in the handbook.

Similarly, the usage of Sienna COVID-19 rapid antigen test is rather simple to perform. You must read the handbook thoroughly and carry out the process carefully to avoid mistakes.

So, here is the Sienna COVID-19 rapid test instruction that you must carry out to perform a successful rapid antigen test.

STEP 1: First of all, sanitize your hands with a potent sanitizer or wash your hands with a bar of soap for at least 1 minute. And remove the swab from the package without touching the head of the swab.

STEP 2: Then tilt the patient’s head back 70 degrees and gently insert the soft end into your nostril with a flexible shaft (wire or plastic) until resistance is encountered or the distance equivalent to that from the ear to the nostril of the patient, indicating contact with the nasopharynx.

STEP 3: Tenderly rub and rotate the swab pressing gently against the insides of your nostril. Now, leave the swab in place for several seconds and get as much nasal discharge as possible.

STEP 4: Slowly remove the swab while rotating it and repeat the previous process in your other nostril without replacing the swab. But collection from both nostrils is unnecessary if the swab is saturated enough.

Note: If a deviated septum or difficulty in collecting a specimen occurs, use the same swab to obtain a specimen from the other nostril

STEP 5: Tear off the seal on top of the collection tube, and place the accumulated swab directly into the extraction buffer tube immediately.

STEP 6: Before removing the swab, rotate it at least 5 times or for at least 10 seconds while pressing the head against the inside of the tube. Then leave the swab in the extraction buffer tube for 1 minute.

STEP 7: Remove the swab from the tube while squeezing it against the inside of the tube to expel as much liquid as possible from the swab.

STEP 8: After that, tighten the cap of the extraction buffer tube and remove the test cassette from the sealed pouch and place it on a level surface. STEP 8: Now, invert the extraction buffer tube with the sample holding the tube vertically above the Sample Well (S). Squeeze and add 3 drops to the sample well (On the side where ‘S’ is marked) of the test cassette.

STEP 9: Immediately after adding the solution to the sample well, set the timer for 10 minutes and wait for the result. But do not move the cassette.

Note: Do not move the cassette. Also, it is important to read your results within 10-20 minutes. Do not read after 20 minutes.

How to determine the result?

• When Positive, two colored lines appear. One colored Control Line (C) should appear along with another apparent colored line appearing in the Test Line region (T).

• If the result is Negative, one colored line will be seen in the Colored Line region (C) without any colored line appearing in the Test Line region (T).

• Likewise, if the result is Void or Invalid, no line appears in the Control Line region (C) and the Test Line region (T). Also, the test is Void, if one colored line is seen in the Test Line region (T) with no line appearing in the Control Line region (C).

Conclusion

To finalize, the Sienna COVID-19 rapid antigen test is a reliable and swift method for detecting the presence of the COVID-19 virus at any moment you feel suspicious. It is operated by a trained healthcare assistant, is highly effective, and provides rapid results, making it useful in situations where a fast diagnosis is essential.

What’s more, it can be conducted to a lot of people in a given amount of time handing them their results in under a few minutes.

Overall, the Sienna COVID-19 rapid antigen test is a valuable and potential tool for determining the SARS-Cov-2 pathogens in a small space or a large facility.

Finally, the article has presented overall details about the Sienna COVID test price, accessibility, accuracy, and instructions. Thus, we suggest you and your family members take a quick Sienna COVID rapid antigen test if you seem to show flu symptoms.

The contact details and product lists, both are provided on the website. For more info like this, you can look up our blog section too.

Frequently Asked Questions

What is the Sienna COVID-19 Rapid Antigen Test?

The Sienna COVID-19 Rapid Antigen Test is a diagnostic test used to detect the presence of the SARS-CoV-2 virus that causes COVID-19. The test is a lateral flow assay, which means it uses a small sample of nasal or throat swab and produces results in 15-20 minutes.