DIMENSIONS
Pre-Finished Tongue & Groove Panels
Ready Pine is the fast and convenient way to install your pre-finished tongue and groove pine for ceilings and walls.
Pre-Finished Panels No More Messes Easy Installation
Our Superior fit end-matched panels cine pre-finished and sealed on the back to prevent warping
Choose from variety of factory applied stains and say goodbye to drips, runs and odors.
Profiles Choices
Just install and you’re done. It’s fast and easy with less waste for faster project completion time
While both profiles use a tongue & groove system, our V-Match profile features a "V" shaped slot between each panel. Our Shiplap profile features a channel between each panel. The depth of the channel is 1/8” and the width is 1/8” for 6” wide panels and 1/4” for 8” wide panels.
Pickled Pine
Early American
Shiplap (Nickel Gap)
Natural Beauty
Ready Pine is available in 12 beautiful stain colors that are translucent, allowing the natural wood grain and knots to show through. Whether you choose a stain or the clear finish that preserves the natural wood tone, every board is top-coated with the same clear finish for a clean look
COLOR STAINS IN STOCK: PICKLED PINE & EARLY AMERICAN
All other colors available by special order.
Pickled Pine
Early American
Bennington Grey
Beige
Autumn Pine
Golden Pecan
Wescott Navy
Red Oak
Nightfall
Ipswich Pine
MDF Cloud White Opaque
Mocha
Puritan Pine
Seagull Grey
TYPAR Residential BuildingWrap
As rugged as the day is long, TYPAR Building Wrap is built to take the rigors any jobsite.
TYPAR BuildingWrap excels in all the ways that matter most to true construction pros. For starters, it’s rugged—with tear strength that’s five times greater than the competition. And while it blocks air and water from getting in, it’s smart enough to let moisture out of the wall cavity. That means it stands up to the elements with toughness and intelligence other building wraps can’t touch. Plus it delivers incredible durability, efficiency, and safety long after the cladding is up.
• Superior water holdout defends the wall cavity.
• Exceptional air blockage increases energy-efficiency.
• Optimal breathability decreases risk of mold growth.
• Extraordinary tear strength prevents worksite damage.
• Surfactant resistance reduces hazards of oils, soaps, and powerwashing.
• UV protection stops rays and provides six months exposure time
• Works with most cladding
• Lifetime limited warranty
DURABLE SIDING AND TRIM THAT DOESN’T HARM THE PLANET
IN STOCK AND AVAILABLE FROM
White
Pelican
Greystone
Rushmore
Dark Slate
Foot Hill Pewter
Iron Ore
Dusty Green
Spanish Moss
Oyster Shell
Cape Cod Gray
Bark Seal Black
Cinnabar
Khaki Brown Eiffel Tower
New Pilgrim Red
NEW Synthetic fiber-based Technology
Wood fiber-based materials have a unique look and feel that have appealed to architects, building professionals, and homeowners for centuries. However, the durability of these materials are negatively impacted by nearly all climates, whether humid or dry, or cold or hot.
RISE Siding and RISE Trim are also manufactured using a fibrous-based technology – RISE® Technology – however, the synthetic fiber-based technology we use makes our wood replacement products look and feel just like real wood. They're also:
Stronger than products made from non-fibrous materials, including wood flour, silica dust and extruded plastics.
More capable of holding up under all weather conditions, including high moisture and severe freeze/thaw conditions, because, like plastic, they will outperform wood, wood flour and silicabased products.
Made in the U.S.A.
2X4 AND
2X6X16’
For more information, contact your Sprenger Midwest Sales Representative at 1-800-843-3797.
AND 20’ TOLKO ZINC BORATE TREATED LSL SILL PLATE FROM SPRENGER MIDWEST
These ZB (Zinc Borate) treated products are approved for use as defined in AWPA U1, Use Category UC2. ZB treatment protects the product from termites and fungal decay without compromising structural integrity or consistency of the product. Each piece of Zinc Borate treated 1.35e T-TEC LSL is individually edge sealed in red for easy identification after installation.
Although they may have many uses, a primary application for these items will be for bottom-plate material due to their superior compression strength and dimensional stability –compared to solid wood options.
AVAILABLE FROM SPRENGER MIDWEST
Pictured:
Doug
Fir Boards and Patter
1. 1x6 and 1x8 T&G (Pattern 116 side up)
2. 1x6 and 1x8 T&G (Pattern WP4 side up)
3. 2x6 WC-200 V2E Single T&G
4. 1x4 S1S2E (rough-sawn side up)
5. 1x4-1x6-1x8-1x12 S1S2E (smooth side up)
6. 1x8 DF Circle Sawn Nickel Gap
7. 1x8 DF Circle Sawn Nickel Gap (end-view face side up)
8. 1x4-1x6-1x8-1x12 S1S2e (rough-sawn side up)
9. 1x12 S1S2E (smooth side up)
10. 1x4 C&Btr DF Flooring (face side up)
11. 5/8x4 C&Btr DF Beaded Ceiling (face side up)
12. 1x12 S1S2E (rough-sawn side up)
NEW&IMPROVED
AC FIR PLYWOOD
FROM SPRENGER MIDWEST
Sprenger Midwest is proud to stock AC Fir Plywood from Roseburg and PotlatchDeltic.
Sprenger Midwest is currently stocking sizes:
4x8 1/4 AC FIR PLYWOOD
4x8 3/8 AC FIR PLYWOOD
4x8 1/2 AC FIR PLYWOOD
4x10 1/2 AC FIR PLYWOOD 10'
4x8 5/8 AC FIR PLYWOOD
4x8 3/4 AC FIR PLYWOOD
4x10 3/4 AC FIR PLYWOOD 10'
ROUGH CEDAR
Sprenger Midwest is currently stocking sizes:
2X4 ROUGH WRC 8'-20'
2X6 ROUGH WRC 8'-20'
2X8 ROUGH WRC 8'-20'
2X10 ROUGH WRC 8'-20'
2X12 ROUGH WRC 8'-20'
4X4 ROUGH WRC 8'-20'
6X6 ROUGH CEDAR 8'-20'
6X6 ROUGH CEDAR 24’
4X8 WRC ROUGH APPEARANCE 12' - 16' - 20'
4X12 WRC ROUGH APPEARANCE 12' - 16' - 20' - 24'
6X8 WRC ROUGH APPEARANCE 12' - 16' - 20'
6X12 WRC ROUGH APPEARANCE 12' - 16' - 20' - 24'
8X8 WRC ROUGH APPEARANCE 10' - 12' - 16' - 20' - 24'
Rough Cedar
PATRIOT PLYWOODS
FROM SPRENGER MIDWEST
Sprenger Midwest is currently stocking sizes:
4x8 1/4" IRON PLY
4x8 1/4"(5.2mm) REVOLUTION PLY
4x8 1/4" Reversible Beadboard
4x4 1/4"(nominal) SURE PLY PREM U/L
4x8 1/4"(nominal) SURE PLY PREM U/L
4x8 1/2"(12mm) DRAWER SIDE PANEL
4x8 1/2"(12mm) REVOLUTION PLY
4x8 3/4"(18mm) REVOLUTION PLY
Revolution Ply
HARDELPLY SIDING
FROM SPRENGER MIDWEST
4x8 3/8” RGH DOUG FIR S/E
4x8 3/8 x 8' RGH SAWN S/E CLR HARDELPLY
4x9 3/8 x 9' RGH SAWN S/E CLR HARDELPLY
4x10 3/8 x 10' RGH SAWN S/E CLR HARDELPLY
4x8 1/2 x 8' RGH SAWN S/E CLR HARDELPLY
4x8 5/8 x 8' T1-11 4" OC DOUG FIR
4x9 5/8 (9') T1-11 4" OC DOUG FIR
4x8 5/8 x 8' T1-11 8" OC DOUG FIR
4x9 5/8 (9') T1-11 8" OC DOUG FIR
4x8 5/8 x 8' RB&B 12" OC DOUG FIR
4x9 5/8 (9') RB&B 12" OC DOUG FIR
4x8 5/8 x 8' RGH SAWN S/E CLR HARDELPLY
4x8 5/8 x 8' RGH SAWN 4"OC CLR HARDELPLY
4x9 5/8 x 9' RGH SAWN 4"OC CLR HARDELPLY
4x8 5/8 x 8' RGH SAWN 8"OC CLR HARDELPLY
4x9 5/8 x 9' RGH SAWN 8"OC CLR HARDELPLY
4x8 5/8 x 8' RB&B 12"OC RGH CLR HARDELPLY
4x9 5/8 x 9' RB&B 12"OC RGH CLR HARDELPLY
DOUG FIR TIMBERS
FROM SPRENGER MIDWEST
Sprenger Midwest is currently stocking sizes:
10x10 #1 DF Rough GRN FOHC 12' - 16' - 20'
2x6 DF STK T & G V-Joint / SQ Back KD 12' - 16' - 20'
3x12 #2/BTR KD DOUG FIR S4S 16' - 20'
4x4 #2/BTR DOUG FIR S4S KD 8' - 20'
4x6 #2/BTR DOUG FIR S4S KD 8' - 20'
6x6 #1 GRN DOUG FIR S4S 12' - 16' - 20'
6x6 #1 ROUGH GRN DF FOHC 12' - 16' - 20'
6x12 #1 DF GRN Rough FOHC 12' - 16' - 20'
8x8 #1 KD S4S DOUG FIR FOHC 12' - 16' - 20'
8x8 #1 DF Rough GRN FOHC 10' - 12' - 16' - 20'
8x12 #1 DF Rough GRN FOHC 12' - 16' - 20'
Doug Fir
LOG SIDING
FROM SPRENGER MIDWEST
White Fir (Smooth)
Sprenger Midwest is currently stocking sizes:
2X6 SPF PREM T & G 8' - 20'
2x8 SPF MTN HEWN LOG SIDING 8' - 20'
2x8 WF SMOOTH Sierra Prem LOG CABIN 8' - 20'
8" X 10' V-NOTCH CORNER - HAND HEWN PINE
3 X 4 X 16' TRIM - HAND HEWN PINE
Forover50years,Shakertownhasbeen beautifyingandprotectinghomesacross NorthAmerica.That'saclaimfewother sidingmaterialscanmake.Withatrack recordthatextendsahalfacentury,our historyspeaksforitself.
Madewith100%clearverticalgrain heartwoodcedar,nothingelsecompares totherichappearanceandoutstanding performanceofourcedarshinglepanels.
Asthebusinessexpanded,theirfocus wasoneaseofinstallation Thisgoalled totheinventionoftheshinglepanel system.Today,theirCraftsmanShingle Panelcanbeinstalled10xfasterthan individualshinglesandstilluse100% verticalgraincedarfullylaminatedto exteriorgradebackerinplywood presses.
Inadditiontotheshinglepanelsystem, ShakertownintroducedtheDollyVarden T&Gproductin2015 Thisengineered cedarT&Ghasaclear,100%vertical graincedarfacethatis1/8"thick.The tongueistwiceasstrongassolidcedar, sothereisnosplittingwhenpneumatically nailing.Asinnovationcontinues,Shakertown continuestobeontheforefront.
Intheearly1950'sthecompanymoved toWinlock,WAtobeclosertothe cedarresources. Fastforwardto1992,Shakertown waspurchasedbyTheClarkeGroupof MissionBC.
Benderboard
by Stimson Lumber
0.230” x 49” x 192” 50 pc. Units
0.230” x 12” x 192” 200 pc. Units
0.230” x 6” x 192” 400 pc. Units
*Custom width cutting upon request.
NEW! Finger-Jointed Laminated Columns
By Diamond K Posts
Glued with Waterproof Glue Engineered by Timber Tech
Made with #1 KD Southern Yellow Pine .60 CCAKDAT on lower end with a 50-yr warranty on treatment.
Only the best raw materials are used in Diamond K Posts and we start with #1 Southern Pine lumber for both treated and untreated portions of the column. The bottom treated part of the column is protected against rot, decay and insect damage (.60 CCA).
SPECIALTY STRUCTURAL FRAMING COLUMNS
Individual plys have more complete treating than larger solids.
Straighter, stronger and lighter columns greatly reduce labor cost in field as well as eliminate call backs
Posts won't crack or split and are of uniform dimensions with lumber planned to specific sizes.
Untreated portion on upper end eliminate the need for hot-dipped, galvanized nails.
Longer lengths available in a minimal amount of time from placement of order.
Individual plys can be notched for a superior truss bearing connection.
Adhesive between plys greatly cut down on interior layer slip resulting in better
PRODUCTS
SPF, HF, DF and SYP
Hiline/Prem #2, Select
Structural and MSR Lumber
2x4 and 2x6 8’-9’-10’ PET #2/Studs
Cedar Knotty and Clear Patterns and Bevel Sidings
MCA and CCA Treated Lumber and Plywood
1x2, 1x3 and 2x2x8 Furring Strips
4x8, 4x9 and 4x10 OSB
Sheathing and Flooring
Prefinishing Services with PPG Coatings
5.25” to 24” Deep 2.0E LVL
3 5”, 5 5”, 7 25” and 11-7/8”
RL and PET 1.35E LSL
Particle Board Panels, Shelving and Stepping
4x8 and 4x9 SYP, Fir and Cedar T1-11 Plywood Sidings
Log Cabin Siding and Accessories
Finex Foundation Panels
Stimson Benderboard Concrete Form
Doug Fir Smooth and Rough Timbers
Primed Poplar 1x6 and 1x8 Pattern Boards
LP Weather Logic Sheathing
2x6 – 2x12 22’-28’ Doug Fir
Fir and SYP Plywood Sheathing, Sanded and Underlayment
Cedar S4S and Rough Lumber and Timbers
Century Aluminum Rail Systems
Fire Treated Lumber and Plywood
Cedar Shakes and Shingles
Gorman Pine Boards and Pattern Stock
Rise Composite Siding and Trim
9 5”, 11-7/8” and 14” IJoists
OSB Rimboard and Stepping Armadillo Composite Decking
Tom’s Hardwood Lumber –Oak, Maple, Poplar, Hickory and Alder
Shakertown Products
Laminated Columns
Hoft Privacy Fence Systems Hardwood Plywood
Clear Coated 1x6 WP4 Pine, Alder and Hickory
LP FlameBlock OSB
DuraColor Cedar-Tone MCA Treated Decking Materials
Iron Ply, RevBead, Sureply and Revolution Ply
WoodPro Screws
