XEPS 3.0 SHADOW FORCE
The flex and feeling under your feet has similarities to your traditional PU but with more pop and flare. Built using recycled plastic, so its better for the planet. Built to be mindful without compromising performance.
WING MAN SHADOW FORCE
Looking to improve your surfing game and leave those wipeouts in the past? Aloha Surfboards has got you covered with the WING MAN - Shadow Force.
This board is built for reliability in overhead waves and can also handle the smaller knee-high grovellers with ease. With a smooth and balanced plane shape, you'll be able to accelerate on your front foot and jam in the pocket on your back foot. The distinctive wing trailing the twin fin breaks the rail line, reducing the tail surface area and allowing for tighter turns in smaller waves. The single to double concave helps increase water flow and acceleration while maintaining control at high speeds.
The core is made of 36-gram EPS with a 20mm HD stringer, while the lamination is EPOXY with a 45mm Innegra band at the top and bottom. The deck features 3oz of recycled PET and 1 x 40z Ecloth, and the bottom has 1 x 6 oz Ecloth. The fin system is available in FCS2 or Futures, with a twin + stabilizer fin configuration. The rocker is designed for general performance, while the rail is medium and the tail is a single wing swallow. Say goodbye to those embarrassing wipeouts and hello to the Wing Man.
LENGTH x WIDTH x THICKNESS = VOLUME:
Core: 36gram EPS + 20MM HD Stringer
Lamination: Epoxy w/ 45mm Innegra tape @ top + bottom + 1 x 3oz recycled PET cloth + 1 x 4oz E-cloth deck + 1 x 4oz E - cloth bottom
Fin System: FCSII/Futures
Rocker: Low - Medium
Bottom Contours: Single to Double
Tail Shape: Swallow
Colour: Clear
5’8 x 19 3/4 x 2 3/8” 29.41L 5’10 x 20 x 2 1/2” 32.28L 6’0 x 20 1/4 x 2 5/8” 35.33L
x 20 1/2 x 2 7/8” 40.20L
6’2
SNORK SHADOW FORCE
The SNORK is short, wide and fast. A curvy outline fits perfectly into the smallest of pockets. Flat entry rocker enables instant acceleration, combined with a single to double concave for release in the tail.
Medium to low rails help draw out turns and control the speed. To be ridden 2“ shorter with 2 litres more volume than your regular shortboard.
LENGTH
x WIDTH x THICKNESS = VOLUME:
5’8 X 20 1/4 X 2 1/2”
5’10 X 20 1/2 X 2 9/16”
Core: 36gram EPS + 20MM HD Stringer
Lamination: Epoxy w/ 45mm Innegra tape @ top + bottom + 1 x 3oz recycled PET cloth + 1 x 4oz E-cloth deck + 1 x 4oz E - cloth bottom
Fin System: FCSII/Futures
Rocker: Low - Medium
Bottom Contours: Single to Double
Tail Shape: Square squash
Colour: Clear
31.31L
36.70L
39.24L
42.27L
33.59L 6’0 X 20 3/4 X 2 11/16”
6’2 X 21 X 2 3/4”
6’4 X 21 1/4 X 2 7/8”
SERUM SHADOW FORCE
The SERUM is an every day shortboard designed to perform in waves from waist to over head conditions.
Single concave under the front foot enables this daily shredder to engage the face of the wave with double concave through the fins to redirect water flow through the tail, assisting with control and tight turns in critical sections of the wave.
LENGTH x WIDTH x THICKNESS = VOLUME:
5’8 x 19 5/8 x 2 7/16” 28.48L
5’10 x 19 7/8 x 2 9/16” 31.14L
6’0 x 20 1/4 x 2 5/8” 33.52L
Core: 36gram EPS + 20MM HD Stringer
Lamination: Epoxy w/ 45mm Innegra tape @ top + bottom + 1 x 3oz recycled PET cloth + 1 x 4oz E-cloth deck + 1 x 4oz E - cloth bottom
Fin System: FCSII/Futures
Rocker: Medium
Bottom Contours: Single to Double
Tail Shape: Squash
Colour: Clear
6’2 x 20 1/2 x 2 3/4” 36.43L
LOPEZ H2 SHADOW FORCE
“The H2, like all the designs I’m working with, was created through building surfboards for my friends to have more fun on”.
The H2 is an original concept dreamt up to skate across flat sections with a low rocker and fuller outline upfront to create speed quickly and efficiently. The back end of the H2 pulls in nicely with a moderate tail rocker and a rounded squash.
Similar in design to a small wave shortboard, the squash tail allows for freedom of movement in steep sections with the speed you’ve generated. The H2 is like a classic skateboard with soft wheels that rides smooth and does what you ask when you need it most.
LENGTH
x WIDTH x THICKNESS = VOLUME:
5’6 x 19 1/4 x 2 5/16” 25L
5’8 x 19 3/4 x 2 3/8” 27L
5’10 x 20 1/2 x 2 1/2” 31L
6’0 x 20 3/4 x 2 5/8” 36L
6’2 x 21 1/4 x 2 3/4” 40L
Construction: 36gram EPS + 20MM HD Stringer
Lamination: Epoxy w/ 45mm Innegra tape @ top + bottom + 1 x 3oz recycled PET cloth + 1 x 4oz E-cloth deck + 1 x 4oz E - cloth bottom
Fin System: FCSII/Futures
Rocker: Low - Medium
Bottom Contours: Single to Double
Tail Shape: Round
Colour: Clear
NEW FISH SHADOW FORCE
“I love this design. The new fish helped me solve a major hangup I was having with original fish designs - the swallowtails. I only like a swallow tail if it is built as a quad for fast point breaks or with a tiny swallow on a twin with a trailer for mushy beach breaks. Neither of those is the best suited for today’s surfing or geared towards how I like to ride and shape surfboards. My goal when shaping is to make the experience as fun and easy as possible. Allowing you to surf better and more.“
The NEW FISH has a clean curve through the tail and the pulled in squash is best surfed with your normal thruster setup. If you want to ride fast and free in small surf, go a size smaller with the fins. This board flies. For top speed and quickness, nothing is faster on the water than the New Fish.
Construction: 36gram EPS + 20MM HD Stringer
Lamination: Epoxy w/ 45mm Innegra tape @ top + bottom + 1 x 3oz recycled PET cloth + 1 x 4oz E-cloth deck + 1 x 4oz E - cloth bottom
Fin System: FCSII/Futures
Rocker: Low - Medium
Bottom Contours: Single to Double
Tail Shape: Round
Colour: Clear
5’5 x 19 1/2 x 2 1/4” 26.63L 5’7 x 19 7/8 x 2 5/16” 28.69L 5’9 x 20 3/16 x 2 3/8” 30.40L 5’11 x 20 5/8 x 2 7/16” 33.12L 6’1 x 21 1/8 x 2 9/16” 36.16L
x WIDTH x THICKNESS = VOLUME:
LENGTH
SKIPPER SHADOW FORCE
The SKIPPER is an ultimate all rounder. An easy paddler with slightly lower entry rocker and fuller outline. Wide point is forward with a lower rail that blends smoothly into the foiled round pin tail. Five fin configuration allows for thruster performance in most conditions and a quad option when the waves are a little more critical or tubing.
LENGTH x WIDTH x THICKNESS = VOLUME:
6’2 x 21 x 3” 42.36L
6’4 x 21 1/2 x 3 1/16” 45.53L
6’6 x 21 3/4 x 3 1/6” 47.00L
6’8 x 22 x 3 1/4” 51.53L
6’10 x 22 1/2 x 3 1/4” 54.22L
Lamination: Epoxy w/ 45mm Innegra tape @ top + bottom + 1 x 3oz recycled PET cloth + 1 x 4oz E-cloth deck + 1 x 4oz E - cloth bottom
Fin System: FCSII/Futures
Rocker: Low - Medium
Bottom Contours: Single to double
Tail Shape: Round
Colour: Clear
PU CLEAR
Stable, consistent and ready for anything like a trusty side kick who always has your back!
WING MAN PU CLEAR
Looking to improve your surfing game and leave those wipeouts in the past? Aloha Surfboards has got you covered with the WING MAN - Shadow Force. This board is built for reliability in overhead waves and can also handle the smaller knee-high grovellers with ease. With a smooth and balanced plane shape, you'll be able to accelerate on your front foot and jam in the pocket on your back foot. The distinctive wing trailing the twin fin breaks the rail line, reducing the tail surface area and allowing for tighter turns in smaller waves. The single to double concave helps increase water flow and acceleration while maintaining control at high speeds. The core is made of 36-gram EPS with a 20mm HD stringer, while the lamination is EPOXY with a 45mm Innegra band at the top and bottom. The deck features 3oz of recycled PET and 1 x 40z Ecloth, and the bottom has 1 x 6 oz Ecloth. The fin system is available in FCS2 or Futures, with a twin + stabilizer fin configuration. The rocker is designed for general performance, while the rail is medium and the tail is a single wing swallow. Say goodbye to those embarrassing wipeouts and hello to the WING MAN.
Deck : 2 x 4oz E-Cloth Bottom: 1 x 4 oz
E-Cloth + 4 oz Oval Fin Patches
FCSII/Futures
5’8 x 19 3/4 x 2 3/8” 29.41L 5’10 x 20 x 2 1/2” 32.28L 6’0 x 20 1/4 x 2 5/8” 35.33L 6’2 x 20 1/2 x 2 7/8” 40.20L
PU Sanded Clear LENGTH x WIDTH x THICKNESS = VOLUME:
JALAPENO PU CLEAR
Designed as a versatile all round performance model the Jalapeno has a single to double concave with a slight vee in the tail allowing for speed control and release during rail turns.
The Jalapeño is a great option for the one board surfer looking for a model that can be surfed in just about any conditions from 2 to 3 feet beach breaks to over head hollow waves.
The extra width through the nose and slightly reduced entry rocker makes the Jalapeño easy to paddle and fast from the take off. The versatile 5 fin setup adds to its diversity and allows surfing in hollow, barreling waves. 5’6
LENGTH
Deck : 2 x 4oz E-Cloth
Bottom: 1 x 4 oz E-Cloth + 4 oz Oval Fin Patches
FCSII/Futures
x 19 1/4 x 2 1/2” 28.12L
x 19 1/2 x 2 9/16” 30.10L
x 19 3/4 x 2 5/8” 32.15L
x 20 1/4 x 2 11/16” 34.75L
x 20 1/2 x 2 3/4” 36.98L 6’4 x 20 3/4 x 2 7/8” 40.11L 6’6 x 21 x 3” 43.57L
5’8
5’10
6’0
6’2
WIDTH x THICKNESS
x
= VOLUME:
EZ-MID TRI PU CLEAR
The EZ MID is for surfers focused on the smooth glide of a longer board without the “learner” plan shape. It’s all about high lines and trim. Suited to all levels of surfer from beginner - advanced, the wide point is centred for maximum trim and reduced swing weight in the nose. The EZ MID can be surfed as a single fin or install the side bites for more control in critical conditions.
LENGTH x WIDTH x THICKNESS = VOLUME:
6’6 x 20 3/4 x 2 5/8” 38.94L
7’0 x 21 1/4 x 2 3/4” 44.67L
7’6 x 21 3/4 x 3” 53.64L
Deck : 1 x 4oz E-Cloth + 1 x 6oz E-Cloth
Bottom: 1 x 6 oz E-Cloth + 4 oz Oval Fin Patches
FCSII/Futures
FUN DIVISION LONG PU
The FUN DIVISION Longboard has all the elements of traditional longboards with modern features. Single fin box with side bite configuration for more drive and performance in critical conditions. The general emphasis is on just catching a wave, big or small, and riding it to the beach, turning, walking and nose-riding.
LENGTH x WIDTH x THICKNESS = VOLUME:
8’6 x 22 3/8 x 2 7/8” 63.65L
9’1 x 22 3/4 x 3” 72.89L
9’6 x 23 1/4 x 3 1/4” 84.33L
Glassing: Deck : 2 x 6oz E-Cloth
Bottom: 1 x 6oz E-Cloth + 4 oz Oval Fin Patches
Foam Core: PU
Finish: Sanded
Colour: Clear
PVCP CONSTRUCTION
A modern spin on a classic, T band stringers look great and add loads of strength. PVCP is durable and solid perfect for adding life to a traditional PU core. Surfs smooth and is perfect for Mids and Longboards to increase the glide...
PINTAIL NOSERIDER
The PINTAIL NOSERIDER shares a lot of similarities to the Log but as the name suggest is more setup for nose riding. It has a little more tail rocker to help hold the tail of the board in the wash when up on the nose coupled with a nose concave to provide control and lift. It has a slightly finer ‘egg rail’ to engage into the wave face for a stable, controlled ride and the plan shape is also a little more generous in the nose to allow easy walking and cross-stepping. The pintail is a very forgiving and versatile tail shape that can be turned or jammed easily to match the speed of the wave. This board is available in three sizes, including a ten footer for the bigger surfer and is an asset in the quiver for both beach breaks
LENGTH x WIDTH x THICKNESS = VOLUME:
PU + 10MM PVCP “T” Band stringer
2 x 6oz deck + 1 x 6oz bottom
Medium noserider
Classic rolled vee
x 22 7/8 x 2 7/8” 68.18L 9’4 x 23 x 3” 73.36L 9’6 x 23 1/8 x 3 1/8” 78.06L
9’1
FUN DIVISION PVCP LOG
Longboard – from 8’6 to 9’6 the FUN DIVISION PVCP PU Longboard has all the elements of traditional longboards and modern features with an emphasis on just catching a wave, big or small, and riding it to the beach, turning, walking and nose riding. High volume equals loads of fun all day every day!
LENGTH x WIDTH x THICKNESS = VOLUME:
8’6 x 22 3/8 x 2 7/8” 63.65L
9’1 x 22 3/4 x 3” 72.89L
9’6 x 23 1/4 x 3 1/4” 84.33L
Construction: PU + 10MM PVCP “T” Band stringer
2 x 6oz deck + 1 x 6oz bottom
Single plus sides
Medium
Bottom Contours: Classic Rolled Vee Round
Clear
The CHOPPED LOG has a traditional longboard outline. Designed to glide and flow through dead sections in marginal conditions. This board trims and gains speed easily. Great paddling power and favouring pivot turns, this slide loves to be ridden on the nose. It’s perfect for point trimming or clean beach breaks.
LENGTH x WIDTH x THICKNESS = VOLUME:
PU + 10MM PVCP
Band stringer
2 x 6oz deck + 1 x 6oz bottom
: Classic Rolled Vee
“T”
TWIN PIN TINT PVCP
The TWIN PIN is an easy paddler with slightly lower entry rocker and fuller outline. Wide point forward, flatter deck with a lower rail that blends smoothly into the foiled rounded pin tail. Twin fin speed coupled with smooth rail to rail transition this board works best on open faces with enough volume to whip around on
LENGTH x WIDTH x THICKNESS = VOLUME:
6’6 x 20 1/8 x 2 5/8” 37.00L
7’0 x 20 5/8 x 2 3/4” 42.90L
7’6 x 22 1/4 x 3 1/4” 57.92L
PU + 10MM PVCP “T” Band stringer 2 x 4oz deck + 1 x 4oz bottom
FCSII/Futures
Single to Double
The EZ MID is for surfers focused on the smooth glide of a longer board without the “learner” plan shape. It’s all about high lines and trim. Suited to all levels of surfer from beginner - advanced, the wide point is centred for maximum trim and reduced swing weight in the nose. The EZ MID can be surfed as a single fin or install the side bites for more control in critical conditions.
LENGTH x WIDTH x THICKNESS = VOLUME:
PU + 10MM PVCP “T” Band stringer
2 x 4oz deck + 1 x 4oz bottom FCSII/Futures + single fin box 10“
Single to Double
TINT POLISH
Fine sanded, compounded and polished to a high gloss finish
TWIN PIN TINT POLISH
EZ MID
The EZ MID is for surfers focused on the smooth glide of a longer board without the “learner” plan shape. It’s all about high lines and trim. Suited to all levels of surfer from beginner - advanced, the wide point is centred for maximum trim and reduced swing weight in the nose. The EZ MID can be surfed as a single fin or install the side bites for more control in critical conditions.
LENGTH x WIDTH x THICKNESS = VOLUME:
6’6 x 20 3/4 x 2 5/8” 38.94L
7’0 x 21 1/4 x 2 3/4” 44.67L
7’6 x 21 3/4 x 3” 53.64L
Glassing: 1 X 6oz + 4oz patch Bottom: 1 x 6 oz + 4 oz Fin Patch
Foam Core: PU Timber Stringer
Leash Plug: Slot Box
Finish: Cut Lap Resin Tint/Polish
Colours: Sage, Eggshell
TWIN PIN TINT POLISH
The TWIN PIN is an easy paddler with slightly lower entry rocker and fuller outline. Wide point forward, flatter deck with a lower rail that blends smoothly into the foiled rounded pin tail. Twin fin speed coupled with smooth rail to rail transition this board works best on open faces with enough volume to whip around on smaller days.
LENGTH x WIDTH x THICKNESS = VOLUME:
6’6 x 20 1/8 x 2 5/8” 37.00L
7’0 x 20 5/8 x 2 3/4” 42.90L
7’6 x 22 1/4 x 3 1/4” 57.92L
Glassing: Deck: 1 X 6oz + 4oz patch
Bottom: 1 x 6 oz + 4 oz Fin Patch
Foam Core: PU Timber Stringer
Finish: Cut Lap Resin Tint/Polish
Colours: Mushroom, Sky
PINTAIL NOSERIDER TINT POLISH
The PINTAIL NOSERIDER shares a lot of similarities to the Log but as the name suggest is more setup for nose riding. It has a little more tail rocker to help hold the tail of the board in the wash when up on the nose coupled with a nose concave to provide control and lift. It has a slightly finer ‘egg rail’ to engage into the wave face for a stable, controlled ride and the plan shape is also a little more generous in the nose to allow easy walking and cross-stepping. The pintail is a very forgiving and versatile tail shape that can be turned or jammed easily to match the speed of the wave. This board is available in three sizes, including a ten footer for the bigger surfer and is an asset in the quiver for both beach breaks and point breaks. 9’1
Deck: 2 X 6oz + 4oz knee patch
Bottom: 1 x 6 oz + 4 oz Fin Patch
PU Double Timber Stringer
SURF 10“ Slot Box
Cut Lap Resin Tint/Polish
x 22 7/8 x 2 7/8” 68.18L
x 23 x 3” 73.36L
x 23 1/8 x 3 1/8” 78.06L
9’4
9’6
VOLUME:
LENGTH x WIDTH x THICKNESS =
SUPERCORE
FUN FUN FUN for EVERYONE!!! Super Fun, Super Durable, Super EPS Core. Lightweight and manoeuvrable perfect for maintaining control in and out of the water.
FONZARELLI ALOHA SMILE
Attention all surfers looking for more flotation, more volume, more waves, more paddle power, more small wave performance and more fun!
Fonzarelli is a high volume board that has been design for performance and versatility in small fun waves.
The mid-length sizing (6’6, 6’10 and 7’0) ensures that Fonzarelli increases your wave count. Well suited to a beginner wanting more control than a longboard or a cruiser for an experienced surfer looking for a small wave
38gsm
6’6 x 21 x 2 5/8” 41L 6’10 x 21 3/4 x 2 3/4” 47L 7’0 x 22 1/2 x 3” 54L
x WIDTH x THICKNESS = VOLUME:
LENGTH
x 160gsm Fibreglass
Molded EPS Supercore 3
Single to Double
SKEGG ALOHA SMILE
The skEgg is a rounded nose rounded tail shape like an EGG. The egg shape is designed as a fun addition to the quiver and the Intention is to provide a design that sits between a shortboard and a longboard. The round tail is a compromise in manoeuvrability between a square tail and pin tail. Square tail has multiple pivot points for looseness and pin tail is designed for speed and hold.
Smooth curves in the outline, rail and bottom curves helps this design carry speed in weaker waves.
The fundamental design elements when scrambled and cooked perfectly are a beginner surfers treat looking for access into the steeper sections of the wave face when graduating from a longboard or softboard.
SUNDAE SKEGG ALOHA SMILE
The Sundae skEgg is a true mid-length egg shape! Rounded nose and rounded tail. The wider nose area increases paddle speed, volume under your chest provides a stable platform
The wide round is designed to function like a pin tail while maintaining the manoeuvrability of a square tail. Square tails have multiple pivot points for looseness and the pin tail is designed for speed and hold.
LENGTH x WIDTH x THICKNESS = VOLUME:
7’2 x 21 1/4 x 2 3/4” 47.5L
7’6 x 21 1/2 x 2 7/8” 52.7L
8’0 x 22 1/4 x 3” 60.8L
38gsm Molded EPS Supercore
3 x 160gsm Fibreglass
Thruster
Single to Double
Olive + Spearmint
ECO SKIN CONSTRUCTION
Low VOC Super Light Super Strong Super EPS core, more durability is better for you and the Earth. Surfs smooth and feels solid, perfect for drawing lines on all types of wave faces. All round performance for all types of surfers. Looking for performance and durability adding an Earth friendly board to your quiver?
SKEGG ECO SKIN
The skEgg is a rounded nose rounded tail shape like an EGG. The egg shape is designed as a fun addition to the quiver and the intention is to provide a design that sits between a shortboard and a longboard. The round tail is a compromise in manoeuvrability between a square tail and pin tail. Square tail has multiple pivot points for looseness and pin tail is designed for speed and hold.
Smooth curves in the outline, rail and bottom curves helps this design carry
The fundamental design elements when scrambled and cooked perfectly are a beginner surfers treat looking for access into the steeper sections of the wave face when graduating from a longboard or softboard. The skEgg is also the perfect summer fling for an experienced shredder!
LENGTH x WIDTH x THICKNESS = VOLUME:
5’10 x 21 x 2 5/8” 36.5L
6’2 x 22 1/4 x 2 3/4 “ 24.0L
6’4 x 22 1/2 x 2 13/16” 45.5L
Deck : 1 x 200gram Cloth + Paulonia Skin + 160gram
Cloth Bottom: 1 x 200gram Cloth + Paulonia Skin + 160gram Cloth + 4 oz Oval Fin Patches
FONZARELLI ECO SKIN
Attention all surfers looking for more flotation, more volume, more waves, more paddle power, more small wave performance and more fun!
Fonzarelli is a high volume board that has been design for performance and versatility in small fun waves.
The mid-length sizing (6’6, 6’10 and 7’0) ensures that Fonzarelli increases your wave count. Well suited to a beginner wanting more control than a longboard or a cruiser for an experienced surfer looking for a small wave option to add to
LENGTH x WIDTH x THICKNESS = VOLUME:
6’6 x 21 x 2 5/8” 41L
6’10 x 21 3/4 x 2 3/4“ 47L
7’0 x 22 1/2 x 3” 54L
1 x 200gram Cloth + Paulonia Skin + 160gram
Cloth Bottom: 1 x 200gram Cloth + Paulonia Skin + 160gram
Cloth + 4 oz Oval Fin Patches
Super EPS
MID ECO SKIN
The MID is for surfers focused on the smooth glide of a longer board without the “learner” plan shape. It’s all about high lines and trim. Suited to all levels of surfer from beginner - advanced, the wide point is centred for maximum trim and reduced swing weight in the nose. The MID can be surfed as a single fin or install the side bites for more control in critical conditions.
6’6 x 20 3/4 x 2 5/8” 38.05L
7’0 x 21 1/8 x 2 3/4“ 44.27L
7’6 x 21 3/4 x 2 7/8” 51.13L
Deck: 1 x 200gram Cloth + Paulonia Skin + 160gram Cloth
Bottom: 1 x 200gram Cloth + Paulonia Skin + 160gram
Cloth + 4 oz Oval Fin Patches
Super EPS
LENGTH x WIDTH x THICKNESS = VOLUME:
JALAAN SLABB
Jalaan Slabb is an Aboriginal, 16 year young female Shaper and surfer from the small coastal town of Fingal Head, Australia. Hailing from the Coodjinburra Clan of the Bundjalung nation, Jalaan grew up learning her culture from her family.
Born into a surfing family, she has always surfed and just a couple of years ago was introduced to the art of shaping and she hasn’t stopped. Jalaan’s passion for designing and shaping surfboards comes from her connection to the land and the ocean. It is evident in her shapes that in every touch there is something special.
Jalaan’s name comes from the Bundjalung language,meaning rainbow, showing us who Jalaan is and the boards she’s bringing out of the bay.
ALOHA X JALAAN PEANUT PU
This PEANUT is about one thing - FUN. From beginner to advanced surfers the Peanut delivers a forgiving ride. A wide point slightly rear of the centre allows the board to turn with ease. Combined with a full, softer rail, round nose and easy rocker entry it transitions smoothly through turns. The tail rocker is flatter providing increased planing speed across slower sections.
LENGTH x WIDTH x THICKNESS = VOLUME:
6’0” x 20 5/8” x 2 5/8” 37.38L
6’2” x 20 3/4” x 2 5/8” 39.36L
6’6” x 21 1/4” x 2 7/8” 45.22L
7’0” x 22” x 3” 52.36L
Core: PU + Timber Stringer
Lamination: 4 x 4 x 4 E-glass
Fin System: FCSII or Futures
Fin Configuration: Thruster
Rocker: Medium
Rail: Smooth 50/50
Bottom Contour: Single to Double + rolled vee
Tail: Round
Finish: Sanded
Colours: Berry, Aqua
1/58 Centennial Circuit, Byron Bay Arts & Industry Estate. Byron Bay NSW, 2481 Australia
2024
ALL ROUND NUGGET XF
5’8 x 19 3/4” x 2 5/8” - 35L
6’1 x 20 3/4” x 2 3/4” - 41L
6’3 x 21 x 2 3/4” - 43L
6’6 x 21 1/4 x 2 7/8” - 47L
6’10 x 21 1/2“ x 2 7/8” - 51L
7’0 x 21 1/2” x 3” - 55L
7’6 x 21 3/4” x 3 1/8” - 63L
8’0 x 22“ x 3” 1/8 - 68L
Core: 36gsm EPS +
timber stringer
Construction: Classic XF
Deck Lamination:
1 x 6oz E-Glass + 220g Biax
Bottom Lamination:
1 x 6oz E-Glass + 4oz fin patches
Resin: UV Optical Highlight Epoxy
Rocker: McCoy
Fin System: Thruster
FCSII or Futures
Contours: Loaded Dome
Outline: Wide Round Tail
2024
CLEAR
SUNRISE SUNSET SKY
2024
ALL ROUND MALIBU XF
9’0 x 21 1/2 x 2 7/8” - 78L
9’2 x 21 7/16“ x 3 1/8” - 79L
9’4 x 23” x 3 1/4” - 87L
10’0 x 23” x 3 3/8” - 98L
Core: 36gsm EPS + timber stringer
Construction: Classic XF
Deck Lamination:
1 x 6oz E-Glass + 220g Biax
Bottom Lamination:
1 x 6oz E-Glass + 4oz fin patches
Resin: UV Optical Highlight Epoxy
Rocker: McCoy
Fin System: Single 10 Inch Box
Contours: Rolled Vee
Outline: Pulled in Pin Tail
SUNRISE SUNSET CLEAR
SKY
2024 ALL ROUND NUGGET ALL ROUND MAL
We know getting a surfboard right is about a lot more than shaping. Each board blends elements of timeless design with innovations in materials, production and finishing. We aim for quality, consistency and durability, and insist on value for its riders...
Adam Dalli, Designer & Owner.
SUPER EPS CONSTRUCTION
2024
Superior Flex, Durable, Super EPS Core. Lightweight and Strong Construction.
Satin Clear
Painted Finish Coat
6oz Eglass
4oz Eglass
36 gsm EPS Core
6oz Eglass
Timber Stringer
Painted Finish Coat
Satin Clear
DOUBLE YOLK
The Double Yolk is simply a very easy to surf, smooth and responsive mid length twin fin. This board paddles extremely well, automatically generates speed and requires little effort to turn. This is due to the design of which has more outline curve and a modern combination of bottom contours, matched with twin fin pivot and maneuverability.
Med/Low vee, single/double, vee Futures
Recommended fin setup: Large upright twin EPS core with Stringer, 6+4oz deck, 6oz bottom Sky, Cinnamon
2024
Rocker: Low
Rail shape: Med/high
Bottom Contours: vee, single/double, vee
Fin System: Futures + single box
Recommended fin setup: Single or tri fin
Construction: EPS core with Stringer, 6+4oz deck, 6oz bottom
Colours: Smoke Green , Dune
TORRINO TWIN
The Torrino Twin is not your average mid length… Imagine a board that paddles like a long board but surfs like your short fish! This design has more rocker combined with more double concave and vee throughout. Primarily a twin, but can also be ridden as a tri fin.
vee, single/double, vee Futures
Recommended fin setup: Twin, Twin + stabiliser or tri fin EPS core with Stringer, 6+4oz deck, 6oz bottom Copper, Dune
2024
The Mod Log is a classic longboard with a modern twist. Old school outline shape with a performance hydro hull bottom design of a single to double concave combined with bevelled bottom rail edges. This will allow more control with increased speed and maneuverability.
single/double, bevelled rails
Futures + single box
Recommended fin setup: Single or tri fin EPS core with Stringer, 6+4oz deck, 6oz bottom
2024
1/58 Centennial Circuit, Byron Bay Arts & Industry Estate. Byron Bay NSW, 2481 Australia
1/58 Centennial Circuit, Byron Bay Arts & Industry Estate. Byron Bay NSW, 2481 Australia
