Supply Post West April 2016

EQUIPMENT

TECHNOLOGY

ECONOMY

TRUCKING

New Genie Platform Baskets Offer New Game Lets You Play With JD 5,000 People Attend Site C More Entry Points PAGE 14 G-Series Skid Steers PAGE 20 Job Fairs

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER · SUPPLYPOST.COM

Family Owned Since 1971

PAGE 53

Terex Trucks Unveil New Products And Plans At AED Summit PAGE 75

WESTERN CANADA EDITION · $3.75 · APRIL 2016

WOMEN IN

TRADES CAREERS: BC Government Pledges $1.8 million For The Women In Trades Training (WITT) Initiative Through The Industry Training Authority (ITA).

ISTOCKPHOTO.COM

See Page 52

Advertiser’s Index ........6 Section Two ..............33 Classifieds .................54 Section Three ............65 Truck Photo Ads ........78

APRIL 2016 · VOL. 45 · NO. 4 Publications Mail Agreement #40070144

DO YOU KNOW ABOUT REPAIR FINANCING?

KEEP YOUR CAPITAL IN THE BUSINESS ...

CALL TO FIND OUT HOW! Buy with confidence, apply online at hefcosolutions.com or call (866) 691-4499 for a free professional consult

scan for details

Page 2

Supply Post Western Canada Edition · supplypost.com

April 2016

“Proudly Serving the Lower Mainland Since 1945”

• RENTALS • SALES • CONTRACTING • SALES: Dave 778-855-4190 | dave@unitedearthcontractors.com OFFICE: 604-940-0001 | Fax 604-940-0005 RENTALS: Tony 604-230-4047 | tony@unitedearthcontractors.com

Earth Contractors

LOTS OF NEW INVENTORY! $94,000

$95,000 2008 John Deere 200D LC Clean up bucket, Hyd Q/C, U/C 70%, 10 FT Stick, A/C , 7,900 hrs. New paint and ready to work.

2007 John Deere 225D Man Q/C, GP bucket, Dig bucket, 8400 hrs, U/C 65%, headgasket just repaired with dealer warranty.

Good runner and ready to work.

$89,000

$62,000

$39,000

$61,000

!

D L SO 2004 Caterpillar D6N LGP Crawler Tractor brand new Cat U/C, approx. 11,000 hrs. This Cat feels like new.

D5M LGP Transmission just rebuilt, great tight machine with lots of life, new paint and 75% U/C. 8,000 hrs.

$95,000

Volvo A25 This Volvo is one of our older Volvos, but most reliable! Tires 65%, clean exterior truck with side boards.

$78,900

2010 John Deere 310SJ Like new, TC controls, c/w dig bucket. Hoe pack and 12" bucket available. 3,000 hrs.

25,000 ea

$97,500

!

D L SO JD 350DLC 9100 hours approx, very tight maintained machine, new under carriage and all around look and feel of machine is great.

$165,000

2008 966H 1200 hours, very well maintained! This unit is still very tight & clean all around. Tires all good, c/w load scale, 3rd valve, hyd. Q/C, GP bucket (not shown), also have forks & 18 yd chip bkt avail.

$98,500

1994 Cat 140G Motor Grader 14’ moldboard, tires in excellent condition, cab is very clean. Machine has lots of life and still works daily.

2007 INGERSOLL RND SD160 DX Great running clean unit! 84” smooth drum roller (ready for bolt on pad foot) Heat, AC, Full glass all around for perfect vision.

Tires at 60% This machine is ready to work!

$68,000

2008 JD 225D LC - Amazingly tight unit, new under carriage, very clean machine with only 8000 hrs.

$45,000

Dyna Pac CA25’s very clean great runners, One is smooth, one pad foot. Take your pick at 25,000 ea.

$35,000

2002 CAT IT-38G INTEGRATED TOOL CARRIER c/w Q/C bkt, aux. hyd., cab, 20.5R25, additional accessories upon request. 10,000 hrs.

2012 Bobcat T190 Tracks like new, low hours 1,300, fully loaded, great runner.

$85,000

$105,000

$45,000

Selection of A30D and A35D Rocktrucks Hours ranging from 12,000+. Good rubber on most of the trucks and lots to choose from. All running daily and serviced regularly.

Volvo A25 c/w tailgate - clean truck, strong runner, brand new rubber.

Starting at

!

D L SO

Volvo A25D clean machine, clean cab, 15,000 hrs, Michelins on the fronts.

FIND MORE AT UNITEDEARTHCONTRACTORS.COM

2008 CAT 262C SKIDSTEER LOADER V-Track system, brand new tires that Q/C, near new tracks and new cutting edge on bkt, very clean machine, great shape.

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Enough benefits to make your head spin.

Increase your machine utilization.

“Our Rototilt machines are always out working”.

Transform your excavator into a multi-functional tool carrier.

“Do every job around the work site in less time”.

“We do with one machine what we used to do with 2 or 3 different machines”.

RO

TA TI

ON

40 0

•

Built in quick coupler to change buckets or tools fast and easy.

0

“Work smarter, faster, and safer with less equipment and reduced manpower”.

360

“Each Rototilt saves us at least one labourer”.

TI

LT

•Q UIC K COU PLER

To hear what Rototilt customers say go to . . .

rototilt.ca

youtube.com/RototiltNorthAmerica

Talk to your Dealer or Call us: (519) 754-2195

Page 3

Page 4

Supply Post Western Canada Edition 路 supplypost.com

April 2016

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Hyundai Adds Tool Master Model Hyundai Construction Equipment Americas today introduced the Hyundai HL940TM wheel loader, the newest addition to its HL900 series of Tier 4 Final-compliant wheel loaders. The HL940TM joins a family of five other Hyundai HL900 wheel loader models the company introduced in 2015 to U.S. and Canadian markets.

As the first Tool Master model to join the HL900 series lineup, the HL940TM features Hyundai’s Tool Master boom design, with dual linkage for increased lifting capacity, improved load stability, rapid dumping capability and enhanced visibility. The HL940TM comes equipped with a standard 3.0 yd3 (2.3 m3) bucket, and delivers 23,880 lbf (10 830 kgf) of bucket breakout force. A Cummins QSB6.7 Tier 4 Final engine rated at 156

net hp (116 kW) powers the HL940TM. Accurate onboard weighing system is standard Like other Hyundai HL900 series wheel loader models, this first Tool Master model includes Hyundai’s proprietary onboard weighing system, with is accurate to +/- 1%. The system has automatic and manual settings for monitoring individual and cumulative bucket load weights.

System measurements are displayed on the multifunction screen in the cab, providing reliable load-weight monitoring to support efficient production management. However, there is no onboard printer to facilitate certified load measurements.

Productivity and fuel economy among key upgrades “The HL940TM – and our entire HL900 series

Print_QS331_A5ad_US_dealers.indd 1

– continue the Hyundai wheel loader tradition of power, productivity and ease of operation, while adding new creature comforts, productivity enhancements and additional efficiencies that make these machines quality leaders in the market,” said Corey Rogers, marketing manager, Hyundai Construction Equipment Americas.

The Hyundai HL940TM wheel loader, like other HL900 series models, delivers up to 5-percent greater productivity and 10-percent lower fuel consumption than previous 9A series models. HL900 series loaders achieve greater fuel economy as a result of such features as Hyundai’s Eco Pedal, programmable autoengine shutdown (available with the smart key option) and Eco Gauge.

Improved cab design The large, quiet cab on the HL940TM wheel loader includes a seven-inch (178 mm) interactive touchscreen monitor, enhanced climate control, fully adjustable and heated air-ride seat, centralized control switches and significant incab sound reduction. The cab has been reconfigured for additional floor space

and improved visibility. For added operator comfort, incab sound levels were reduced by 3 dB, making this one of the quietest cabs in the industry. An optional Smart Start ignition system for password- or Bluetooth key-enabled machine start is also available on the HL900 series machines.

Ergonomically positioned operator switches, controls and other features make it easier to quickly access critical functions.

The touchscreen monitor includes a speed-limit control, and an improved rearview camera delivers higher resolution and enhanced nighttime visibility.

Industry-leading warranties The Hyundai HL940TM is protected by Hyundai’s industry-leading threeyear, 3,000-hour standard warranty and five-year, 5,000-hour structural warranty. Hyundai also includes three years of free access to its Hi-Mate remote management system which provides a variety of remote monitoring and diagnostic services.

Learn More about the New HL900 Series. b Source: Hyundai

Page 5

5425 Production Blvd., Surrey, BC, V3S 8P6

Phone 604.530.5758 Fax 604.530.3554

Toll Free 1.888.530.5444 Focused on Parts for John Deere & Hitachi Late Model Excavators · Components · Cylinders · Cabs · Engines · Undercarriage · Booms · Sticks · Linkage NOW WRECKING: ZX450LC

www.langleyexcavator.com parts@langleyexcavator.com

23/02/2016 08:42

Page 6

Supply Post Western Canada Edition · supplypost.com

Riverside Equipment Rentals "LOCALLY OWNED AND OPERATED"

NEW TO THE FLEET

ADVERTISERS INDEX Accurate Fabricating

46 Diamond Industries

53 LiuGong

Aero Auctions

53 Dolphin Mechanical

Alberta Construction

39, 47 Rollins

25

56 LNH Equipment

57 Rototilt

3

25 Doosan

29 Lonetrack

45

Alberta Engines

61 Dressta

27 Magnum Attachments

18

Alquip Diesel

74 E-Quip

57 Misan

59

All Cut Systems

24 Eagle Coast Mining

56 Mormak

Ammann

28 Equip. Sales & Service

30 Morooka Rentals

Aspen Trailers

74 Finning

Axis Forestry

54 Foreman Equipment

33 Nor Mar

35 Sexsmith Used Farm Parts 55

B & G Parts

50 ForesTech

22 Norstone Excavating

44 ShearForce

Banning Equipment

56 Frank’s Repair

59 Northland Chipper

10

Bison Iron

41 Frontline

10 Northview Timber

56

41 On-Track Railway

42

22

55 General Aggregate Equp

18 Oversized Equip

58

Bobcat

26 Great West Equipment

19 P & R Truck Centre

65

16, 17 Groundworx

Brandt Value Parts

54 Handlers

Brown International

60 Harbour International

Brutus Truck Bodies

35 Hefco

Camex

Royquip

60

RWF Bron

51

S. Guy Gauthier

51

Sandvik

5

36 Saratoga Ventures

Bob’s Diesel

Brandt Tractor

FOR OUR FULL LINE-UP & RENTAL RATES!

8

20, 43 National Leasing

5 Gear Centre

Blanche Equipment

VISIT: WWW.RIVERSIDEEQUIPMENT.COM

April 2016

24

26

Skreenquip Sales

34

Specialized Trailer

77

Terra Firma

30

Toro Steel Buildings

40

7 Trak Tech

38 Pacific Rim Equip 8 Pacific Site Constructors 70 Parker Pacific

28 Truck Photo Ads 32

36 78, 79

True North Equipment

59

Truxpo

68

Tundra Equipment

55

1 Peerless

80

69 HKX

42 Penner’s

20

Canadian Western Bank

12 Hope Mechanical

61 PHES

40

Case

23 ILA

75 PM Industries

71

Tyalta

21

CD Industrial

50 Inland Equip Sales

12 Pollard (Chilliwack)

11 Tysea Mfg.

28

CE Heathcote

54 Interior Diesel

45 Powerscreen of Wash.

43 United Earth Contractors

Coastal Pacific Equip

60 International Machinery

67 Premium Truck

ConExpo

63 Iron Planet

64 Prince George Truck

61

Continental Equip

14 Jade Equipment

24 Prolenc

79

Cookson Motors

76 K-Line Trailers

69 Ramsey Co.

46

Crawler Sales

53 Kinshofer

47 Right Trucks

77

Cubex

29 Kubota

9 Ritchie Bros.

37

D & D Logging

56 Langley Excavator

5 Riverside Equipment

Darby

47 Liebherr

71, 72, 73 Van Ed

2 14

Vancouver Trac Parts

38

VI Equipment

11

Wally’s Private Parts

58

Warner HD Parts

55

6 Westerra

31

15 Rocky Mountain Equip. 48, 49 Woodland

NEXT DEADLINE: Friday, April 22, 2016 Produced by:

www.postpublishers.com #105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5

www.supplypost.com ■ www.truckpost.ca PHONE (604) 607-5577 ■ FAX (604) 607-0533 ■ TOLL FREE 1-800-663-4802

2014 CAT D5K LGP & D6K LGP 2D/3D TRIMBLE READY

Call Ernie or Daryl Today!

1-800-566-0557 Email ernie@riversideequipment.com daryl@riversideequipment.com

Cell Ernie: 604-854-0583 Daryl: 604-309-3980

WWW.RIVERSIDEEQUIPMENT.COM 3112 Pratt St., Abbotsford, BC V2S 3C7 Phone 604-556-0557 • Fax 604-556-0559

Managing Partner ...............................Gary Mazur

Sales/IT ..............................................Gary Mazur

Sales Manager ................................... Jeff Watson

Marketing/Circulation Manager ... Christine Mazur

Regional Account Manager .............Jake Peterson Regional Account Manager ...........Shantal Horner

Controller....................................... Debra Watson Editorial/Production Assistant ........... Sheryl Kaye Art Director ......................................... Linda Horn

Regional Account Manager ...............Jethro Horca

Graphic Designer .............................Lisa Schmale

Classified Sales............................Michelle Villiers

Graphic Designer ....................... Carol Van Muyen

CIRCULATION

Direct Mailed copies .............. 14,200 Newsstand copies .................... 2,200 Total distribution .................... 16,400 Please call our office for full details

Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.

The Supply Post is a proud member of the following Trade Associations:

INTERIOR LOGGING ASSOCIATION

RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only) No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5

4

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 7

Phone: 250-493-4545

1698 Dartmouth Rd, Penticton, BC V2A 4B8

Fax: 250-493-8819 AFTER HRS, Joe Hewer: 250-490-6795 AFTER HRS, Dave Garnett: 250-490-7976

RENT OR RENTAL PURCHASE AVAILABLE $36,900

2006 JOHN DEERE 35D EXCAVATOR, RUBBER, CAB, HYD THUMB, 12" BKT, 34" C/U BKT, 2,839 HRS EXCAVATORS

NEW YANMAR SV08-1B MINI EXC, 2,348 LBS, 2’3” WIDE, DIGS 5’4” DEEP .. .............................................................................................................. POR NEW YANMAR VIO17-A EXP TRACKS, DIG BKT DIGS 7’7” DEEP ............ POR 2015 YANMAR VIO25-6 CANOPY, HYD Q/C, HYD THUMB, 196 HRS .. $39,900 NEW YANMAR VIO25-6 RUBBER, CANOPY, HYD Q/C, 3 YR WAR ............. POR 2005 HITACHI ZX35U-2 RUBBER, A/C CAB, 6,526 HRS .................... $22,450 NEW YANMAR VIO35-6 RUBBER, CANOPY, HYD Q/C, 3 YR WARRANTY .. POR NEW YANMAR VIO35-6 RUBBER, CAB AIR, HYD Q/C, 3 YR WARRANTY .. POR NEW YANMAR VIO35-6 CAB AIR, HYD THUMB, DIG BKT, 103 HRS ......... POR NEW YANMAR VIO45-6 RUBBER, CAB AIR, HYD Q/CHANGE, 3 YR WAR .. POR NEW YANMAR VIO55-6 RUBBER, CAB AIR, HYD Q/C, HYD THUMB ......... POR 2006 HITACHI ZX75UR 18” BOR, A/C, OFFSET, BLADE, 4,262 HRS ...... SOON 2011 CAT 308D CR 18” PADS, A/C, BLADE, 1,664 HRS .................... $67,900 2012 KOMATSU PC78US-8 18” PADS, BOR, Q/C, HYD THUMB, BLADE, 620 HRS ..................................................................................................$79,900 2013 CAT 308E CR 18” BOR, BLADE, AIR, PIPING, 807 HRS ..................SOON NEW YANMAR VIO80-1A STEEL PADS, CAB, AIR, HYD THUMB, HYD Q/C.. POR NEW YANMAR SV100-2 STEEL, CAB AIR, HYD Q/C, HYD THUMB, 86 HRS ..POR NEW YANMAR SV100-2A STEEL, CAB AIR, HYD Q/C, 3 YR WARRANTY ... POR 2011 HITACHI ZX120-3 28” PADS, A/C, PIPING, ONLY 2,298 HRS .....$99,900 2013 CAT 312D 20” PADS, A/C, HYD Q/C, HYD THUMB, 1,000 HRS ......... POR 2007 CAT 314C CR 20” PADS, AIR, BLADE, 2,671 HRS ........................ SOON 2014 CAT 312E 20” PADS, AIR COND, RVC, ONLY 14 HRS NEW .............SOON 2015 CAT 314E CR 20” BOR, BLADE, A/C, ONLY 417 HRS .....................SOON 2005 HITACHI ZX135US 20” PADS, AIR, 7,243 HRS ..........................$48,500 2008 HITACHI ZX135US 20” PADS, AIR COND, ONLY 3,803 HRS...........SOON 2012 HITACHI ZX135US-3 24” PADS, AIR COND, ONLY 813 HRS ............ POR 2012 HITACHI ZX135US-3 20” PADS, AIR COND, ONLY 1,246 HRS ......... POR 2013 HITACHI ZX135USBL-3 DOZER BLADE, PIPING, 1,263 HRS............ POR 2013 HITACHI ZX135USBL-5 BLADE, Q/C, 2,199 HRS ....................$139,900 2011 HITACHI ZX160LC-3 AUX HYD PIPING, ONLY 6,300 HRS ..........$97,500 2012 DEERE 160G LC 24” PADS, AIR, DIG BUCKET, 5,833 HRS .........$97,500 2012 CAT 316E L 28” PADS, A/C, RV CAMERA, Q/C, HYD THUMB, DIG BKT, ONLY 1,799 HRS ......................................................................................$167,900 2008 HITACHI ZX200-3 24” PADS, AIR COND, ONLY 4,589 HRS............SOON 2011 HITACHI ZX200LC-3 28” PADS, AIR, ONLY 5,909 HRS .................SOON 2012 HITACHI ZX210LC-3 28” PADS, AIR, HYD THUMB, Q/C, CABGUARD, 3,522 HRS ...............................................................................................FOR RENT 2012 HITACHI ZX210LC-3 28” PADS, AIR, HYD Q/C, HYD THUMB, 1,300 HRS ......................................................................................................FOR RENT 2004 CAT 321C LCR HYD THUMB, Q/C, CABGUARD, 8,717 HRS ........$52,900 2007 HITACHI ZX225US-3 32” PADS, AIR, ONLY 6,603 HRS .................SOON 2008 DEERE 225D LC HYD Q/C, HYD PRO LINK THUMB, 5,137 HRS.. $104,900 2008 KOMATSU PC228US-3EO 24” PADS, AIR, ONLY 3,585 HRS ......$79,900 2012 HITACHI ZX225USRLC-3 Q/C, HYD THUMB, CATWALKS, ONLY 2,171 HRS, CABGUARD, SWIVEL GUARD ...................................................$174,900 2013 HITACHI ZX225USLC-3 AIR, Q/C, HYD THUMB, CABGUARD ...FOR RENT 2013 HITACHI ZX225USLC-3 AIR, Q/C, HYDRAULIC THUMB...........FOR RENT 2015 HITACHI ZX245USLC-5 32” PADS, AIR, Q/C, HYD THUMB .....FOR RENT 2015 HITACHI ZX245USLC-5 32” PADS, AIR, Q/C, HYD THUMB, CABGUARD .. ......................................................................................................FOR RENT 2011 HITACHI ZX250LC-5B Q/C, AUX HYDS, PRO HEAT, ONLY 2,705 HRS ...... .......................................................................................................$159,900 2011 KOMATSU PC270LC-8 Q/C, HTD THUMB, 4,300HRS ............... $129,900 2004 KOMATSU PC300LC-7 32” PADS, AIR COND, 9,902 HRS, Q/CHANGE .... ........................................................................................................ $56,900 2007 CAT 330DL 30” PADS, AIR, Q/C BKT, CAB GUARD, 11,941 HRS ....$71,500 2006 HITACHI ZX350LC-3 AIR COND, HYD THUMB, Q/C, 2 BKTS, CABGUARD ............................................................................................................... POR 2008 HITACHI ZX350LC-3 32” PADS, AIR, ONLY 6,226 HRS ...........$114,900 2012 DEERE 350G LC Q/C, HYD THUMB, CABGUARD, ONLY 4,854 HRS.......... .......................................................................................................$189,900 2011 KOMATSU PC350LC-8 Q/C, CABGUARD, Q/C, HYD THUMB, 2,229 HRS .

Ski Apex Mountain Resort Tel 1-877-777-2379 www.apexresort.com

$149,900

$127,500

2013 HITACHI ZX225USR-3 EXCAVATOR, 32" PADS, A/C, ONLY 3,528 HRS, EXCELLENT CONDITION .......................................................................................................$214,900 2013 KOMATSU PC350LC-8 Q/C, HYDRAULIC THUMB, CABGUARD, 1,527 HRS ...............................................................................................FOR RENT 2011 CAT 336E L 32” PADS, AIR, Q/C, DIG BKT, ONLY 3,784 HRS ....$199,900 2013 CAT 336E L RV CAMERA, CAB GUARDS, CATWALKS, Q/C, 48” DIG, 72” CLEAN UP, HYD THUMB, 2,900 HRS.................................................$274,900 2007 HITACHI ZX450LC-3 Q/C, AUX PIPING, 8,070 HRS, EXC COND . $139,900

DOZERS

2007 CAT D6N XL 6 WAY, A/C CAB, MS RIPPER, 4,375 HRS ........... $185,900 2007 CAT D6R XL SIII S/U TILT DOZER, MS RIPPER, DSTEER, 5,365 HRS ...... .......................................................................................................$124,900 2011 KOMATSU D65EX-16 SIGMA DOZER, A/C, CAB, MS RIPPER, 4,462 HRS .......................................................................................................$189,900

WHEEL LOADERS/SKID STEERS/BACKHOES

2012 YANMAR V4-6 4X4, HYSTAT, CAB AIR, Q/C, ONLY 810 HRS ........... POR 2010 CAT 930H 3YD Q/A BKT/FORKS, ONLY 6,785 HRS ................. $122,500 2009 CAT IT38H HYD Q/C, AUX HYD, R/C, 11,198 HRS ..................... $79,900 2011 CAT 950H 23.5 L-5 TIRES, CAB, AIR, ONLY 2,339 HRS ......... FOR RENT 2014 CAT 950K A/C, R/C, E/S, 4.32YD BKT, 1,304 HRS ................. FOR RENT 2012 BOBCAT T110 48” BKT, CAB, AUX HYD, ONLY 710 HRS ........ FOR RENT 2011 BOBCAT T190 CAB AIR, JOYSTICK CNTRLS, 3,082 HRS ................ POR 2012 CAT 259B3 2 SPEED, CAB AIR, 595 HRS, TRACKED LDR.......... $59,900 2014 CAT 252B3 72” GP BKT, A/C CAB, 2 SPEED, HDQ/C, 295 HRS . $49,900 2014 BOBCAT S590 GP BKT, A/C CAB, 2 SPEED, ONLY 435 HRS ... FOR RENT 2013 BOBCAT S650 2 SPEED, HI FLOW, A/C CAB, ONLY 860 HRS . FOR RENT 2004 BOBCAT A300 GP BKT, HI FLOW, JOYSTICK, 7,816 HRS .......... $19,900 2013 CAT 246C HYD Q/C 74” BKT, 2 SPEED, CAB AIR, 2,000 HRS .... $36,500 2006 CASE 580SM II 4X4, E-STICK, 4IN1, 2 BKTS, 6,632 HRS ......... $36,900 2010 DEERE 310SJ 4X4, E-STICK, Q/C BKT/FORKS, ONLY 2,859 HRS .. $69,900

GRADERS / COMPACTORS

2005 VOLVO G740B CAB, 14’ MB, SNOW WING, FRONT DOZER ....... $39,900 2006 CAT 143H VHP CAB AIR, SNOW WING/ RIPPER, 7,892 HRS.... $134,900 2005 CAT 160H VHP 16’ MB, A/C CAB, SNOW WING, 10,480 HRS.. $113,500 2004 CAT 14H 14’ MB, ACCUM, SNOW WING, RIPPER, 11,586 HRS $169,900 2009 BOMAG BW177D-3 66” DRUM, CANOPY, ONLY 2,136 HRS .. FOR RENT 2012 SAKAI SV505T-1 84” SMOOTH DRUM/PADFOOT SHELL KIT, CAB AIR,

APRIL SPECIAL $49,900

2006 JOHN DEERE 270D LC EXCAVATOR, 32" PADS, AIR, Q/C, AUX HYDS, CATWALKS, 8,760 HRS

2008 CAT 730, 750/65R25 TIRES, AIR, RETARDER, HEATED BOX, EMERG STEER, 10,230 HRS 727 HRS ....................................................................................... FOR RENT

DUMP TRUCKS

2002 KOMATSU CD110R-1 360 DEGREE SWING DUMPER, 7,447 HRS .......... ..................................................................................................... $114,900 2005 CAT 730 23.5 TIRES, TAILGATE, 3,196 HRS .......................... FOR RENT 2008 CAT 730 RETARDER, HEATED BOX, EMERG STEER, 10,479 HRS .. $149,900 2011 VOLVO A30F RV CAMERA, EMERG STEER, 4,403 HRS .......... FOR RENT

LIFTS & LIFT TRUCKS 1999 CAT 938G 25,000LB, SIDE SHIFT, A/C CAB, 16,850 HRS.......... $36,000 1998 TOYOTA 52-6FGU30 6,000LB, 3 STAGE, SIDE SHIFT, PROPANE ... SOON 2008 CAT TL943 9,000LB CAP, A/C CAB, TILT CARRIAGE, 2,105 HRS ..... POR 1999 SKYTRAK 10054 10,000LB CAP, Q/C FORKS, STABILIZERS, 54’ REACH ........................................................................................................ $29,500 2008 GENIE GS-1930 19’ SCISSORLIFT, 500LB CAP, 234 HRS ........... $8,990 2005 GENIE Z45/25J 4X4, DIESEL, ONLY 1,824 HRS, 45’ LIFT ......... $35,900 2012 GENIE Z45/25J 4X4, DIESEL, ONLY 1,344 HRS .................... FOR RENT 1999 GENIE Z60/34 4X4, ART BOOM LIFT, DUAL FUEL, 4,300 HRS .. $22,500 2012 GENIE Z60/34 4X4, ART BOOM LIFT, DEUTZ, ONLY 2,085 HRS FOR RENT 2005 JLG 600AJ 4X4,ART BOOMLIFT, DUAL FUEL, 3,531 HRS ...... FOR RENT 2006 JLG 600AJ 4X4,ART BOOM LIFT, CAT ENG, 4,500 HRS.................. POR 2004 GENIE Z80/60 4X4, DIESEL, 3,807 HRS, 80’ LIFT .................... $39,900

MISCELLANEOUS 2004 PEERLESS LB50 TRIDEM 9’ WIDE, DOUBLE DROP, ALUMINUM WHEELS, C/W 2004 PEERLESS JP30 S/A JEEP, EXC CONDITION ...................... $69,900 2004 FORD F750 XL LEDWELL 2,000 GAL WATER TANK, CAT C7, BERKLEY 4” PUMP FRONT, SIDE, REAR DISCHARGE, HOSE REEL 55,000KMS, 2,600 HRS .. ........................................................................................................ $42,900 NEW WACKER WP1550A 200LB REVERSIBLE PLATE, HONDA ............... POR NEW WACKER BPU3050A 400LB REVERSIBLE PLATE, HONDA, WHEEL KIT.. POR NEW WACKER DPU5545HeH 940LB REVERSIBLE DIESEL PLATE ........... POR NEW WACKER DPU6055He DIESEL REVERSIBLE, 1,000LB PLATE ......... POR NEW WACKER BS50-4 4 STROKE RAMMER, ONLY 145LBS ................... POR

USED BUCKETS, THUMBS, ATTACHMENTS,PARTS NEW ZX350LC-3 21 METER LONG REACH BOOM ARM & BKT........ ARRIVED NEW EXCALIBER X36 MECHANICAL THUMB......................................... $550 NEW YANMAR VIO35-6 XTRA CWT FOR VIO35-6 (478LBS) ................... POR NEW BOBCAT 72” HYD GRAPPLE BUCKET 4 SKID STEER .................. $1,900 NEW ERSKINE BOBCAT 84” LIGHT MATERIAL/SNOW BLADE ................. POR NEW ERSKINE BOBCAT 84” LIGHT MATERIAL/SNOW BLADE, WING KIT . POR NEW ERSKINE BOBCAT 72” SNOW/LIGHT MATERIAL BUCKET, BOE ....... POR NEW ERSKINE BOBCAT 84” SNOW/LIGHT MATERIAL BUCKET, BOE ....... POR NEW TOMAHAWK BOBCAT 66” SMOOTH EDGE SKID STEER BUCKET... $750 1993 CAT 140G CAT MS RIPPER REMOVED FROM CAT 140G ............. $7,990 NEW SEC V BUCKET ......................................................................... $3,650 NEW HLA HD FORKS NEW 48” SKID STEER FORKS .............................. $900 BRANDT 36” BKT 36” BRANDT DIG BUCKET 4 TEETH ....................... $2,990 AMI 36” BKT 36” AMI Q/C, 36” DIG BKT, 5 TEETH.............................. $2,650 BMI 42” BKT 42” CLEAN UP BKT JD410J TC BOE ................................ $450 CWS 72” BKT 72” CLEAN UP BKT, TO FIT JD800C/D, ZX800/850....... $9,900 NPK C-6C HYD PLATE COMPACTOR TO FIT JD225D........................... $4,900 2015 V105E 2,500 FT LB HYD HAMMER, VERY LOW HRS (24HRS) ... $12,500

www.pacificrimequipment.com | sales@prequip.com

Page 8

Supply Post Western Canada Edition · supplypost.com

FTS CHASSIS · MOROOKA DUMPERS & PARTS 604-850-3601 ext. 226 Henry: (604) 850-4654 www.handlersequipment.com

EQUIPMENT FOR SALE

$29,000

$12,500

1993 CASE 580SKT, 7,427 hrs, Cab 4-in-1 bucket, Extenda hoe, 2 buckets, Stanley third valve, 4x4, turbo. Runs and operates great.

$240,000

1992 HITACHI DX45M, 2,681 hrs, ROPS 20” pyramid pads, 6-way blade shuffle, 3 forward, 3 reverse, stick steer, runs very well, sticky left steering brake needs adjustment.

$29,900

2010 KOMATSU WA600-6, 15,496 hrs, very nice running unit. Service records available!

1989 CAT D5H, 6 Way blade, runs very well, idlers, rollers and sprockets are all good, needs rails. We have a set here lets talk!

$44,500

$65,000 2006 KOBELCO SK210 LC, 9,798 hrs, operates very well, good U/C, c/w 2 buckets, Q/C and hydraulic thumb. SN: V008-02903.

1998 MOROOKA MST800V, 5,456 hrs, Reconditioned cab, 90% track life left, 9,000 ton, runs excellent.

COMPETITIVE PRICING!

April 2016

John Deere Worksite Pro’s New Extreme Duty Brush Cutter Site preparation, clearing and maintenance tasks are now easier, safer and more productive for operators with the new John Deere Extreme Duty Brush Cutter attachment.

The Extreme Duty Brush Cutter (RS72) is the latest addition to the ever-expanding lineup of Worksite Pro attachments and is optimized to work with select John Deere E- and D-Series skid steers, compact track loaders (CTLs) and most competitive models.

The Extreme Duty Brush Cutter boasts many key features that help drive additional productivity from a skid steer or CTL Most notable is an exclusive, patent-pending retractable forward shield.

When using the Extreme Duty Brush Cutter on larger trees and brush (bigger than four inches in diameter), the shield will move up and away from the tree to expose the entire cutting edge, protecting

John Deere Brush Cutter Attachment “Like all Worksite Pro attachments, the Extreme Duty Brush Cutter will optimize job site performance and productivity,” said Gregg Zupancic, product marketing manager, John Deere Construction & Forestry. “We designed this attachment with smart features to quickly clear heavy brush and keep the operator safe, so he or she can focus on the task at hand without worry of flying debris.”

With the universal, selfcleaning Quik-Tatch easy attachment system found on all John Deere skid steers and CTLs, the machine can easily add and remove the Extreme Duty Brush Cutter in no time.

The new attachment is also backed by John Deere parts, service and warranty coverage. b

the operator from flying debris. Other features and capabilities of the RS72 include: • Ability to cut heavy brush and trees up to seven inches in diameter • Four double bevelededge blades and optional stump-grinding teeth for easy stump removal and material cutting • A unique mower deck that funnels brush and trees to the corners of the mower for maximum blade performance • A smooth deck without deep pockets, so accumulated debris is easily removed or washed away • A vertical motor that Source: John Deere has a heavy-duty spline shaft for increased performance • A standard pressure gauge indicator that is highly visible to the operator, allowing easy monitoring of blade load to prevent overheating and overloading

"STRONG HERITAGE, STRONG FUTURE" Equipment Designed & Built for the 21st Century SCREEN PLANTS

CONE PLANTS

POWER VANS

CALL US TODAY FOR PRICING! FEEDERS

JAW PLANTS

STACKERS

www.mormak.com VERNON, BC

8140 Becketts Rd. | PH: (250) 542-7350

CALGARY, ALBERTA

8815 44th St. SE | PH: (403) 203-2644

CHILLIWACK, BC

7912 Atchelitz Rd. | PH: (604) 795-7511

April 2016

Supply Post Western Canada Edition 路 Our Readers Are Your Buyers

Page 9

Page 10

Supply Post Western Canada Edition · supplypost.com

ORBITAL ACTION

 Productive  Compact  Economical MODEL 68 - EASILY TOWED WITH A PICKUP

SMA FOOTPRLL INT – BIG PRODUC TION!

For ORBIT SCREEN SALES contact:

(800) 665-CHIP (2447) Phone: (604) 532-6000

mrchips@northlandchippers.com www.northlandchippers.com

April 2016

New John Deere 700K SmartGrade Dozer Offers Contractors A Competitive Edge The John Deere 700K SmartGrade crawler dozer is improving jobsite accuracy and quality of work through its complete integration of the Topcon 3D-MC2 Grade Control System. The system is fully integrated into the machine cabin, structures, and software – delivering precise grading performance while eliminating vulnerable external masts and cables.

“By combining the power of Topcon technology with the John Deere track load sensing system, the SmartGrade dozer offers an easy to setup, highly productive grading machine intended for road building, site development and residential building customers,” said Liz Quinn, product marketing manager, John Deere WorkSight. “The 700K SmartGrade dozer is a purpose-built machine that is ready to work the moment it leaves the dealership, and the complete system is sold and fully supported by the world-class John Deere dealer network.”

dercarriage.

Machine dimensions are preloaded into the grade control monitor, reducing the time required to calibrate the dozer to about 30 minutes. Additionally, the easy-to-use system is beneficial to new operators in that it can get them up and running quickly.

Since the 700K SmartGrade dozer is sold and supported by John Deere, customers can work through their dealer and John Deere Financial to finance their SmartGrade machine and Topcon base stations and rovers, helping to maintain cash flow.

The overall return on investment of the Topcon 3D-MC2 Grade Control System is proven in the after-market industry, and the 700K SmartGrade dozer can pay back its purchase price in one to two jobs.

Customers looking to get the most out of their 700K SmartGrade dozer can rely on their John Deere dealers to provide Ultimate Uptime featuring John Deere WorkSight. With Ultimate Uptime, owners receive pre-delivery and follow-up inspections. b

The SmartGrade technology enables operators to be more productive on the jobsite. Because SmartGrade is integrated into the 130 hp 700K, it removes the need to install equipment daily, reducing setup time. Eliminating external cables to the masts reduces breakage, and the removal of the masts from the blade eliminates vulnerability to damage and theft.

The Auto SmartGrade feature allows the operator to easily adjust the system when moving the machine from one soil type to another, unlike an after-market system, which often requires the GPS manager to make a trip to the machine to recalibrate the system. Especially helpful to new operators, Auto SmartGrade automatically lifts the blade over heavy loads before track slippage occurs, then returns the blade to grade. SmartGrade also limits the number of passes required, reducing the pace of wear on the un- Source: John Deere

We Challenge you to find a better tracked jaw crusher

Patented Non-Stop Crushing system to protect against uncrushable objects

HEAVY DUTY FRAME NO SUPPORT LEGS REQUIRED

SMART SEQUENTIAL AUTO START/STOP FROM REMOTE

SAVE TIME! ABILITY TO TRACK WHILE PRODUCING

Apollo jaw crusher

1-855-305-0152 Rentals New & Used Equipment

frontline-machinery.com

Extensive Parts Inventory

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Case IH Introduces True Tandem 335 Barracuda Producers can aggressively manage heavy crop residue and soils with the new True-Tandem 335 Barracuda vertical tillage tool from Case IH. Built on proven Agronomic Design principles, this rugged addition to the industryleading Case IH vertical tillage line-up quickly cuts, incorporates and evenly distributes the most stubborn crop residue up to 4 inches deep. This creates the potential for a blacker surface finish and an increase in nutrient cycling for the next crop.

“We developed the new True-Tandem 335 Barracuda to help producers more productively manage the record-breaking amounts of residue associated with new, high-yielding crop genetics — especially hybrids developed for standability with tougher stalks,” said Chris Lursen, Case IH tillage marketing manager.

“Thanks to the industryexclusive serrated blades engineered with Earth

Metal and greater concavity than most other vertical tillage blades on the market, the Barracuda easily slices through tough residue, uproots root balls and levels out the soil to create the ideal environment for residue breakdown and seedling development.”

Capable of cutting up to 4 inches deep, the new 22-inch Earth Metal® Barracuda blades help producers reach deeper depths and achieve a smooth field finish, while covering acres quickly. The blades penetrate hard, dry soils and break through surface compaction layers to promote soil movement and uniform density. New chiseltipped serrations allow the blades to retain sharpness and durability, even under tough field conditions.

“As the chisel-tipped teeth wear, the valley between each tip stays sharp, retaining the cutting edge and extending the blade’s lifetime,” said Lursen.

Built with the tough-

ness producers demand, the True-Tandem 335 Barracuda vertical tillage tool works on a wide range of soils to quickly break down even the heaviest stubble and stalks. Additional features that ramp up the aggressiveness of the new True-Tandem 335 Barracuda include: Capability to run at 6 to 9 miles per hour for higher speed, higher productivity soil management. Operating at 8 miles per hour, a producer using a 34-foot machine can cover 28 acres per hour.1 • A rugged, pull-through frame that balances weight distribution over tough, fast-changing conditions.

• The 22-inch, crimp centre Earth Metal Barracuda blades are engineered using a unique process and steel formula to prevent brittleness and elasticity, making blades stronger and more durable.

• An 18-degree gang angle matched to each blade’s shallow concavity that provides thorough soil mixing without causing backside blade compaction Continued on page 12

Page 11

POLLARD EQUIPMENT CHILLIWACK LTD

2006 Cat D6R XM Series III • • • • •

16,093 hours, good shape Recent System 1 U/C Multi shank ripper w/ 1 ripper A/C, heat, stereo, slope meter in cab 2 direction U-blade w/ manual angle

604-793-2287

.

2007 Cat 980H Loader • • • •

Excellent Shape 15,000 hours Good Tires Great Pins and Hitch

$175,000

ASKING $86,000

2002 Tigercat 630B • Grapple skidder • Serial: 6301341 • 2702 hours

• Eco-chains • Lots of recent repairs

2013 Tigercat 880 Log Loader • 4900 hours • Welco powerclam with one outrigger • Good undercarriage

$425,000

$75,000

The ‘ideal partner’ for your parts & repair needs

Affordable, Dependable Parts & Service at our shop or at your job site…you choose.

Serving The Lower Mainland and Vancouver Island For Parts & Service call 604-793-2287

www.pollardequip.com

TOLL FREE 1-855-559-9995 PHONE 250-468-1000

EVENINGS & WEEKENDS CELL 250-951-1944

WWW.VIEQUIPMENTLTD.COM

INFO@VIEQUIPMENTLTD.COM

VI Equipment supplies reman excavator parts for many models of Hitachi, John Deere and Caterpillar excavators. All of our remanufactured excavator components are guaranteed to be of the highest OEM quality, tested and warrantied.

DISMANTLED EXCAVATORS

Hitachi ZX450 LC-3 John Deere 270D Hitachi ZX270 LC-3

Hitachi EX300-3

Hitachi ZX200

John Deere 892E LC

Hitachi EX200-2

Hitachi EX400-1

John Deere 200C LC Hitachi EX220-3 Hitachi ZX330 LC

Hitachi EX330 LC-5

John Deere 200 LC

John Deere 790E

John Deere 120

Hitachi EX200LC-3

Cat 336E

Hitachi 270-5

Cat 330CL

Hitachi ZX330 LC

Cat 330B

John Deere 200 LC

Cat 314C

John Deere 892D

Cat 320BL

John Deere 330 LC

Cat 345BL

John Deere 690E

Cat 325

John Deere 892E

Cat 330L

Hitachi ZX240 LC-3

Hitachi EX400

Hitachi ZX270 LC-3

EXCAVATOR PARTS FOR JD/HITACHI/CAT · NEW/USED/REBUILT

Page 12

Supply Post Western Canada Edition · supplypost.com

than most other vertical tillage tools and highlike competitive despeed disks. signs.

• Front and rear gangs • The hydraulically adjustable TigerPaw Crumbler and blades are properly rolling reel, which helps indexed to one another, produce more uniform providing an even surclod sizing, soil particle face finish and a more stratification and residue even subsurface floor

Continued from page 11

distribution.

• The ability to retrofit the Barracuda blade to Case IH True-Tandem 330 Turbo or 335VT models.

The True-Tandem 335 Barracuda is available in working widths from 22 to 34 feet to match most

tractors. Whether spring or fall, producers can use the unit alone or in combination with other tillage operations to achieve soil conditions for uniform crop emergence. b

April 2016

Yanmar Museum Receives “Sustainable Building Award” Yanmar Museum has received the “Sustainable Building Award” from the Japanese Institute for Building Environment and Energy Conservation (IBEC).

This award is granted to outstanding pieces of architecture, that also contribute significantly to environment preservation by way of energy conservation and reduced environmental impact and low carbon emissions. These environmental contributions were made possible owing to the fruitful collaboration among the three enterprises involved in the design, building and ownership of the Museum.

In addition, the Museum received high evaluation for successfully merging Yanmar’s corporate values into the core concepts of environmental preservation and resource recycling technologies.

The ingenious design of the building provides an interactive, family-friendly environment, where children can learn and community ties can be strengthened.

Further promoting en-

Source: Case IH

Part of your crew.

CWB Equipment Financing gets what you do and what it takes to get things done. And because we’re local, we work when and where you do. Need equipment? Make us your first call.

Call Michael, our crew leader, at 1.855.761.0060.

CWBequipment.com CWB Group

vironmental preservation by reducing emissions and conserving energy, Yanmar will continue to deliver high quality products that substantially contribute to the realization of a sustainable society.

The Yanmar Museum was established in March 2013 in Nagahama, Japan, birthplace of our founder, Magokichi Yamaoka, as part of Yanmar’s undertakings that marked a century of operations.

Focusing on the Yanmar Group’s three business domains of the land, the sea and the city, the Museum showcases Yanmar’s enterprise, working in harmony with nature in the fields of food production and harnessing power. The Museum is based around the concept of imparting a lasting and unique experience to visitors through rich and varied exhibits, workshops and hands-on farming programs. b Source: Yanmar

www.inlandequipment.com • sales@inlandequipment.com • 150 Industrial Place, Penticton, B.C. Call Vic Kampe For Details BACKHOE/LOADERS/ EXCAVATORS/FORKLIFTS 2010 JCB 3CX14 Backhoe .................................... Call.

2007 John Deere 410J Backhoe .......................... Call.

2008 John Deere 410J Backhoe .......................... Call.

2009 John Deere 410J Backhoe .......................... Call.

1998 JCB 930 Rough Terrain Forklift, 28', 3 stage, side shift, 6,000 lb, Perkins diesel ..................... Call.

1996 Skytrak 5028 HiTorque, 5000 lb .......... $24,000.

CRAWLERS/WHEEL LOADERS/SKID STEERS 1985 Cat 966C, 500 hrs on new drop-in engine, 3rd valve, bucket with edge ..................................... Call.

1981 Cat 966D, bucket machine .......................... Call.

1969 Cat 950 Loader, 50% tires .........................Call.

1972 Cat 966C, bkt machine, 3rd valve......... $29,000.

2011 Cat 980K, ride control, joystick, 5600 hrs ... Call.

(2) 2005 Cat 246B Skid Steer, closed cab ..........Call.

2014 Cat 252B, cab, 475 hrs ...............................Call.

2004 Cat 287 Skid Steer, rubber tracks, 1300 hrs ....... Call.

2005 John Deere 544J, bucket machine .............Call.

2007 John Deere 544J, Q/C, bkt, 3rd valve ..$69,000.

1993 John Deere 624G, bucket machine ............ Call.

1983 John Deere 644C, bkt machine ........... $21,000.

GRADERS & DOZERS 2007 John Dere 772D, AWD, 14' MB, A/C, ripper . Call.

2004 John Deere 772CH, Ser. II, AWD, ripper .... Call.

2008 John Deere 872D, AWD, 14' MB, A/C, ripper Call.

2005 John Deere 772CH, Ser. II, AWD, ripper ....Call.

1984 Cat 120G Grader, 14 x 24 tires, scarifier ....Call.

2009 & 2008 Cat 160M AWD, c/w ripper ...$155,000.

Ph: (250) 493-6791 Fax: (250) 492-2762

2008 Cat D8T, angle dozer, ripper, cab, good U/C ................................................................$295,000.

2006 Cat 14H No Ripper, SnowWing and Front Lift Group available .................................................Call.

2007 Cat 14H VHP, ripper, push block, 20.5 x 25 tires @ 60% (wing available) ....................................Call.

2006 Cat 14H, c/w ripper, 20.5 x 25 tires ............Call.

(2) 2006 Cat 140H Graders .................................Call.

(2) 2003 Cat 140H Graders .................................Call.

2001 Cat 140H Graders, 14' MB, Low Pro cab, ripper .... Call.

1995 Cat 160H VHP, c/w ripper ........................... Call.

2003 Cat 160H, 12,500 hrs, eng. done 9,900 hrs, trans done 11,500 hrs, W/Os available, ripper & wing available .................................................... Call.

Used Huber Maintainer/Grader ........................... Call.

2008 Cat 160M, 14' MB, ripper, 8,200 hrs, accum., A/C, 14 x 24 tires @ 75%, wing avail., ripper..... Call.

BELLY DUMPS, LOW BEDS & TILT TRAILERS (3) 2012 7 Ton 24' Trailers, c/w 4' sides & ramps ... Call.

2015 Trailmax 27 Ton Triaxle Tilt Deck, 25' tilt, 5' stationary.................................................... $36,900.

1993 Trailmax T/A 21 Ton, tilt w/paver ramps ............ ................................................................... $16,900.

1989 Beall Tri-Axle Super Single Pup Trailer, alloy wheels, alum. box, 15' tarp ............................... Call.

1998 Loadline 14' Gravel Pup, tarp, 85% rubber ................................................................... $21,900.

1996 Peerless 50 Ton TriAxle, 9'6" x 21' deck, detach and beaver tail ................................................... Call.

1993 Knight 50 Ton TriAxle, 10' x 21' deck, detach and beaver tail ................................................... Call.

• WILL PURCHASE QUALITY USED EQUIPMENT • TRY YOUR OFFER, NO REASONABLE OFFERS REFUSED

1990 Peerless T/A Lowbed, c/w booster, detach, neck ext. 8'6" x 21' deck, new paint ........................... Call.

2007 Felling FL-20PT, 10T, elec. brakes ............. Call.

1995 CZ, 12 ton trailer, Budd wheels ...................Call.

1995 14' Midland gravel pups, good tires ...........Call.

1983 14' Gravel Pup............................................Call.

ROLLERS/PACKERS/CRUSHING & PAVING 2007 Amman Roller ............................................. Call.

(2) 2006 Ingersoll Rand SD25F, 42" padfoot and smooth drum..................................................... Call.

1998 Dynapac CA152D, 66" smooth drum, 2580 hrs, Cummins engine ............................................... Call.

2007 Terex 693T SuperTrak Screen Plant, 5' x 20', 3 deck ...............................................................Call.

2007 Astec 4 x 7, 2 deck screenplant, 1,140 hrs, like new ...................................................................Call.

TRUCKS 2007 Kenworth T300 Service Truck, Brutus service body, 260 hp, 9 speed ...............................$80,000.

(2) 2013 Ford 750 S/A Water Trucks, front, rear, and side spray (NEW) ..............................................Call.

2001 Freightliner FL70, Berkley PTO pump... .........Call.

2003 Cat 735 Rock Truck, heated box, tailgates, A/C, E-steer, diff. lock ...............................................Call.

1999 Sterling S/A 2000 Gal Water Truck ........$29,000.

2005 Kenworth T300 T/A 4000 Gal Water Truck ....Call.

2006 Freightliner M2 4000 Gal Water Truck .........Call.

1988 Ford Bucket Truck, 55' boom, 2 buckets, outriggers, 168,000 km ....................................Call.

MISCELLANEOUS 2000 Ford F450XLT Ambulance, 7.3 Ltr. diesel, auto ................................................................... Call.

1981 P&H 40 Ton R/T Crane ........................$35,900.

1997 Bandit 90XP Woodchipper .........................Call.

96" & 84" Snow Blades for Bobcats ....................Call.

1975 Grove RT755 50 Ton 4 Section Boom ........Call.

2007 Sullivan D375Q8CAT S/A Compressor, 1,160 hrs ..........................................................Call.

Skeleton buckets for skid steers .........................Call.

72" Dozer blade for skid steers ...........................Call.

Rock grapple for skid steers ...............................Call.

Front Lift Groups for 140H-160H-140G Graders ....Call.

1999 Ford E450 Ambulance, 4x4 diesel ..............Call.

1999 Ford E450 Ambulance, 7.3 Ltr. 4x4 ....$12,900.

2001 Ford Cube Body Ambulance ................ Call.

NEW 48" sweeper for Bobcat....................... Call.

1999 Ford E350 Ambulance, auto trans, powerwindow, A/C, cruise ................................Call.

Grove 18 Ton RT518 Crane, 20.5 x 25 tires, Hyd Out Riggers .............................................................. Call.

Buckets for 980 & 966 C, F & G........................... Call.

644H John Deere Bucket ..................................... Call.

Forks for 966C ...................................................... Call.

32" Dig Bucket CWS Q/C for John Deere 200...... Call.

48" Dig Bucket CWS Q/C ...................................... Call.

32" Lynn Pin on Hitachi 200 Size ........................ Call.

Cat & John Deere Snow Wings .............................Call.

Bucket 950K ........................................................Call.

FRONT BLADES FOR CAT 140H - 160H ALSO HAVE UNDERBODY BLADES, GRAPPLES & BUCKETS, FRONT PLOWS, BOBCAT ATTACHMENTS

• MANY MORE PIECES OF EQUIPMENT IN THE YARD FOR SALE • FINANCING & RENTAL PURCHASE AVAILABLE

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Our Readers are Your Buyers

— Everywhere!

The easy-to-use Supply Post Digital Edition is FREE! Read Supply Post Digital Edition from your desktop, laptop, tablet, or smartphone Great, industry-related articles Supply Post Digital Edition is in the hands of your buyers — on the job, at the work site, in the office — wherever they are Global readership means the largest reach possible for your products and services Check it out at supplypost.com/digital

Supply Post Digital Edition is optimized for all platforms

supplypost.com/digital

Page 13

Page 14

Supply Post Western Canada Edition · supplypost.com

New Genie Platform Baskets Offer More Entry Points New dual-entry and trientry baskets allow walkin access to the boom platform.

Genie has simplified the way operators enter and exit its boom platforms.

New platform baskets for Genie boom lifts offer three entry points on an 8-ft basket or two entry points on a 6-ft basket to enhance

operators’ mobility. The side swing gate allows for walk-in access to and from the basket when operators are wearing a tool belt, carrying a tool box or needing to load materials in the platform. Sliding mid-rails, engineered into the front and sides of the platform, offer alternative entry and exit points to accommodate

changing worksite conditions.

All entry points are specifically designed to help an operator easily get in and out of the basket, with tools and jobsite materials, from pressure washers and painting supplies to light fixtures and window glazings, quickly and efficiently. Genie offers the dual-entry basket in a 6-ft platform length for its compact booms and a tri-entry 8-ft platform length for its larger models. Genie also engineered these new baskets with eight lanyard at-

tachment points to give operators the freedom to work anywhere on the platform. And, these baskets’ design meets industry expectations for a spacious, robust workspace.

Utilizing proven design technology, Genie manufactures these new platforms with all-steel materials that cannot break down or become compromised with repeated use. Operators can also easily unbolt and replace the platform floor as needed. All of these improvements were made to the new Genie platform

April 2016 baskets without adding weight to the machine or sacrificing basket capacity.

The new dual-entry and tri-entry baskets can be used on any Genie boom that can be equipped with a 6-ft or 8-ft basket so rental store owners can retrofit their existing fleet to accommodate customers’ demand for these features.

These new multi-entry baskets are compatible with most Genie accessories and options, including pipe cradles, panel cradles and fall arrest bars, so rental store owners can also utilize

existing equipment inventory to increase their rental return on invested capital (rROIC).

The Genie dual-entry and tri-entry platform baskets will be available globally within Q2, 2016. b Source: Genie

Attachments & More

BLOWERS & MONSOONS Available at Van-Ed

MACHINERY SALES & RENTALS • KELOWNA, B.C. PHONE: 250-769-5454 • FAX: 250-769-5005 continentalequipment.ca

IN STOCK:

 Filters  Cutting Edges  Bucket Teeth  Equipment Attachments  OTR Loader & Rock Truck Tires

2001 CAT D6R XW, EROPS w/Air, Winch, PAT Dozer, New U/C, 9,800 Hrs. REDUCED!

$99,900 USEd EqUIPMENT & MACHINERY 2008 Hitachi ZX270LC-3, 6,700 HRS, 2 buckets ........................ $124,900 2005 Hitachi ZX800 Excavator, under 5,000 hrs, Dig & Clean Up Buckets, Excellent Condition ..............................................................$349,900 2007 Hitachi ZX270LC c/w Dig & C/U Bkt, A/C, Long Stick, Exc. U/C, Rebuilt Pump, 8,500 hrs.........................................................$89,900 1998 CAT D8R Crawler Dozer, c/w EROPS w/Air, Semi-U w/Tilt or Angle Dozer, Multi Shank Ripper w/2 Shanks, 70% U/C ......................$179,900 1973 Cat 950 Loader, 31K1206, In Good Operating Condition. ..... $21,500 2013 Hitachi ZX135USBL-3, 725 Hrs, Blade, Thumb, Q/C, 2 Bkts ... ON RENT 2012 Hitachi ZX35U-3, 700 Hrs ................................................ $49,900

S AND MONSOONS

BUFFALO TURBINE BLOWER

Stop, ted Engine Wireless Start/ . ec Inj el fu HP .5 26 th wi clone KB4'S NEW EFI models clone PTO'S, MEGA 37HP, Cy Cy . gs vin sa el fu al ion dit ad

with Van Ed. w o n r e d r o e r P

2006 CAT D6N XL, 30% U/C, EROPS w/Air, Ripper Valve, PAT Dozer, Diff Steer, 8,475 Hrs ...................................................... REDUCED $64,500 1998 Hitachi EX225USRLC-5, c/w Hyd. Thumb, Q/C, Dig & Clean Up. New U/C 600 Hrs ago. ...................................................................$39,900 (2) 2006 Volvo A30D Trucks ..................................................FOR RENT 2002 Cat 980G Loader, 40% 29.5 x 25 Tires, GP Bucket w/BOE ....$79,900 2006 Cat 950H Loader, 50% Tires, GP Bkt, Cab w/Air, 10,500 Hrs. .$89,900 1998 Cat 980G, 31,000 Hrs, 70% Tires ...................................... $69,900

ATTACHMENTS Cat E Series Cab Guards ................................................................POR 200 Chuck Blade w/ CWS Lugging .............................................$7,500 Cat 966D/E/F Skeleton Bucket.................................................. $5,000 Loader Tires 17.5 x 25 - 29.5 x 25 ...................................................POR 12 Ton - 20 Ton Wrist Buckets....................................... Starting at $3,900 CWS Dig Bucket to fit ZX200 size ...............................................$3,500

Customers come for the attachments and stay for the company!

1-877-255-9293

604-888-9020

vanedequipment.com

CWS 66" 30 Ton Clean-Up Bucket ............................................. $3,000 FAS 58" Clean-Up Bucket ......................................................... $3,000 Excavator Q/A Pin Grabber ...........................................................POR New Deere 120D Bottom Rotec Down Complete ........................$24,000

Call us at: 1-800-663-5454

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 15

Never Settle.

Visit us at:

Munich, April 11 – 17

Get More, Do More When you need to move dirt and rock quickly, you need our R 936 crawler excavator.

Advanced electronics let drive components work together efficiently to save fuel. Sensor-guided controls give you speed, precision and power. And robust cast steel components stand up to the toughest environments. It’s all built to last with exclusive Liebherr components. For more information, contact us at 1-800-363-7950 “We haven’t compromised on anything; why should you?”

Liebherr-Canada Ltd. 1015 Sutton Drive, Burlington, Ontario L7L 5Z8, Canada Phone: +1 905 319 9222 E-mail: info.lca@liebherr.com www.facebook.com/LiebherrConstruction www.liebherr.ca

2037-501_009_LFR_121_R936_US-Markt_TheSupplyPost_CAN_GB_MH-Bauma.indd 1

14.03.16 15:38

Page 16

Supply Post Western Canada Edition · supplypost.com

65,000

$

2010 JD 310SJ 4994 HRS 4X4, EXT HOE, RC

118,900

$

2011 JD 450J 378 HRS LGP, PAT, BARE BACK, LIKE NEW

145,900

$

2013 JD 160GLC 2936 HRS HYD EXC, AC

49,900

$

1987 JD 770BH 6230 HRS BAREBACK, AC, 14.00 RB

120,000

$

2009 JD 544K 3948 HRS AC, CLOTH SEAT AIR SUSP, ZBAR LINKAGE

79,900

$

2011 JD 310SJ 3962 HRS 4X4, 4IN1 BKT, 2 BKH BKTS, C4C

125,000

$

2008 JD 450J LGP 2431 HRS WINCH, REAR SCREEN, PAT BLD

95,000

$

2007 JD 200D 7957 HRS 28” TRIPLE GROUSER

94,900

$

2006 JD 770D 13263 HRS 14’MLDBD, 2’EXT

105,000

$

2009 JD 544K 9222 HRS 3YD BKT W/TEETH, 2 FUNC, CAB, AC

April 2016

44,900

48,900

$

2002 JD 410G 10390 HRS AC, RIDE, 4X4, EXT, 2 LVR

$

2007 JD 410J 5952 HRS EXT, 6FN, PILOT, RC, QC, DIG, MP BKT

249,500

184,900

$

2015 JD 700K 47 HRS WINCH, ESPAR, EXT WARRANTY

$

2012 JD 750J 1828 HRS 156”-6 WAY BLADE, 34” TRACK SHOES

139,000

115,000

$

2011 JD 200D 5144 HRS CPLR, DIG, CLN, THMB, POS, ESPAR

$

2008 JD 225D 6735 HRS QA, DIG BKT

110,000

199,000

$

2009 JD 770D 7766 HRS SNOW WING

$

2009 JD 772G 6924 HRS BAREBACK, 2’ EXT, FENDERS

165,000

271,000

$

2012 JD 624K 4800 HRS QA, BKT, 3F

$ 2014 JD 624K 32 HRS LOADER

Call Brandt Finance at 1-855-711-4545 to find out more about our customized, flexible financing options.

Used Equipment Clearance 1-888-227-2638 | sales@brandt.ca | www.brandtused.ca

April 2016

Supply Post Western Canada Edition 路 Our Readers Are Your Buyers

68,000

$

2004 JD 710G 5112 HRS ROPS, CAB, HVAC, RIDE, LDR/DIG BK

65,000

$

2004 JD 710G 8724 HRS QC & 2 BKTS, 4X4

2005 CASE 580SM 4X4, EXT HOE, 4IN1 LDR BUCKET 7450 HRS

$22,000

2004 CAT 420D 4N1, EXT HOE, 2 BKTS

$29,000

2009 CAT 430E PIN GRABBER COUPLER 6334 HRS

$89,000

2010 JCB 3CX14 4X4, EXT HOE, 2 BKTS 5895 HRS

$39,000

2011 JD 310SJ 4X4 EXT HOE 4480 HRS

$65,000

2014 JD 310SK LOADER Q/C, 24" DIG 318 HRS

$115,000

2014 JD 310SK 4X4, 4IN1 LDR BKT, PTH WARRANTY 2262 HRS

$104,900

2007 JD 310TJ TMC, 4X4, EXT, 3FN, 4N1, RC, DIG, CU 5290 HRS

$48,900

2008 JD 410J EXT, 6FN, PILOT, RC, QC, DIG 6887 HRS

$48,900

1992 CAT D8N RIPPER, SEMI-U-BLADE, GRDING 24568 HRS

$135,000

2007 CAT D8T 2 BLDS, 26" TRK, RIPPER, FOPS 11760 HRS

$243,000

2004 JD 550J LONG TRACK, AC, RADIO 9239 HRS 2013 JD 550K 6-WAY BLADE 692 HRS

139,200

$

2008 JD 750J 6275 HRS AC, RADIO, CAB LIGHTS

55,000

$

2003 JD 270CLC 12433 HRS DIG & THUMB, MAN COUPLER

139,000

$

2008 JD 870D 8180 HRS S.WING, FENDERS

239,000

$

2012 JD 844K 8029 HRS 7.25YD BOCE, SCALE

415,000

$

2014 JD 850K 1932 HRS RIPPER, TOPCON VALVE, GUARDING

89,500

$

2008 JD 270D 7871 HRS QC, 2 BUCKETS

209,000

$

2009 JD 872G 7625 HRS RIPPER, 14+2 MLDBRD

175,000

$

2009 JD 844K 15702 HRS 7.25 YD W/TEETH, SCALE

Page 17

2007 JD 700J LGP, PAT BLADE, RIPPER 11475 HRS

$70,000 $139,000 $79,500

2012 JD 750J LGP AC, PAT DOZER, 2 BBL MS RIPPER 2297 HRS

$249,000

2012 JD 750J LGP PAT BLADE, RIPPER, TC READY 2287 HRS

$249,000

2010 JD 850J LGP WITH 30" PADS 5991 HRS

$209,000

2012 JD 850J AC, 168"PAT DOZER, RIPPER, SWEEPS 3173 HRS

$269,000

2012 CASE 160 PLUMBED, DIG, TWIST, CLEAN 2505 HRS

$129,500

2007 CASE CX330 MANUAL QA, 84" TWIST 11061 HRS

$67,500

2001 CAT 303.5 HEAT, 32" DITCHING BKT 3558 HRS

$28,900

1994 CAT 320L AUX HY LINES, TILT BKT 23162 HRS

$48,000

1993 HIT 120-2 PATU THINNING HEAD & BKT 9948 HRS

$45,000

1998 HIT 160LC-5 HEAT, AC, DITCH BKT, COUPLER 9655 HRS

$69,900

2007 HIT 200LC HYD THUMB, MANUAL QA 9451 HRS

$78,700

1999 HIT 270-5 TRAMAC HAMMER 15545 HRS

$55,000

1994 HIT 270LC 2 BUCKETS, THUMB, GUARDED 12400 HRS

$39,500

2000 HIT EX230-5 2 BKTS, THUMB 10748 HRS

$50,000

2006 JD 240 2 BKTS, THUMB, UC 90% REMAINING 10596 HRS

$85,000

2006 JD 160CLC AC, DIG, CU, THUMB, AUX 7900 HRS

$79,000

2002 JD 200CLC CWS QC, CU, THUMB, GUARDED 9594 HRS

$65,000

2005 JD 200CLC HYD QC, WBM 36" DIG, 60" CLEAN 12578 HRS

$55,000

2013 JD 210GLC HYD EXC, AC 1664 HRS

$179,900

2014 JD 245GLC GUARDING, PROHEAT, PLUMBING, POS 1037 HRS

$243,900

2006 JD 330C DIG, CLEAN COUPLER, WALKS 10500 HRS

$59,000

2006 JD 350D IB FOGS WALKS 54" DIG 72" CU 7436 HRS

$125,000

2008 JD 350D PIN GRABBER, QC, 2 BUCKETS 6077 HRS

$120,000

2010 JD 450D HYD PIN GRABBER, CRAIG DIG BKT 7725 HRS

$275,000

2010 CAT 14M RIPPER, SNOW WING, 20.5R25 6800 HRS

$299,000

2005 CAT 160H RIPPER, 2' EXT, FENDERS 8200 HRS

$139,500

2008 CAT 160M BAREBACK, AIR RIDE, DIFF LOCK 7804 HRS

$155,000

2012 CAT 160M BAREBACK, F&R FENDERS, 2'EXT 5520 HRS

$199,000

2008 JD 770D MOTOR GRADER 7779 HRS

$119,900

2010 JD 770G AUTOSHIFT, FENDERS, 14X24 SNWPLS 7900 HRS

$168,000

2012 JD 770G REMAINING WARRANTY, 17.5X25 S 5495 HRS

$165,000

Call Brandt Finance at 1-855-711-4545 to find out more about our customized, flexible financing options.

Page 18

Supply Post Western Canada Edition · supplypost.com

ROT 0˚

±4

0

ION AT

36

T I LT R O TAT O R S

&

˚ T I LT

6 MODELS AVAILABLE FOR ALL EXCAVATORS & BACKHOE LOADERS FROM 1.7 - 32 TONS WEIGHT CLASS. TILT ROTATORS COME WITH VARIABLE LOCK COUPLER

MAGNUM ATTACHMENTS WILL GIVE THE WORKING END OF YOUR MACHINERY SUPERIOR PERFORMANCE AND DURABILITY.

71 STEINWAY BLVD, TORONTO, ON M9W 6H6

416.679.8752 | 1.877.640.2862 | FAX 416.679.8753

April 2016

Tigercat Releases D-Series Shovel Loggers Tigercat S855D and LS855D shovel loggers are released with Tigercat FTP Tier 4 power for North American market.

Tigercat has released the D-series shovel loggers in North America. Operating at 210 kW (282 hp), the Tigercat FPT powered S855D and LS855D meet Tier 4 emission requirements.

Tigercat FPT engines offer improved reliability and lower long-term maintenance costs. Best of all, the engines are fully supported

by Tigercat and the Tigercat dealer network. Tigercat will continue to offer the C-series shovel loggers in South America, Australia and New Zealand.

The S855D series shovel loggers are a uniquely versatile solution for steep slope and sensitive site logging applications. The LS855D is a quick, nimble and powerful carrier — well suited to felling, pre-bunching and shovel logging on steep terrain.

The LS855D is commonly equipped with a feller direc-

The efficient hydraulic system is optimized for shovel logging and felling with a directional felling head.

The LS855D is equipped with Tigercat’s patented levelling system, providing exceptional stability in steep slope applications. It uses two massive hydraulic cylinders and heavy steel sections for a solution that is both simple and robust.

The unique geometry of the levelling system promotes balance, poise and stability on slopes. In addition, the ramped undercarriage allows the machines to easily drive up over rocks and stumps. b

tor boom and the Tigercat 5195 directional felling head for felling and shovel logging.

Alternatively the carriers can be equipped with a live heel boom system and grapple for pure shovel logging. Along with the high flotation undercarriage, this is an excellent configuration for southern US style log mat-based lowland logging applications.

With the patented Tigercat ER boom and energy Source: Tigercat recovery swing system, the S855D series shovel loggers can cost effectively forward wood to roadside in steep or wet soil conditions up to distances of 80-100 m (260330 ft). A shovel logger can be strategically located in challenging parts of the cut block to forward trees to the skidder or fell and bunch for a yarding system.

April 22, Unlike excavator-based shovel loggers with addon forestry packages, the S855D and LS855D are purpose-built for heavy duty forestry applications.

NEXT AD DEADLINE: 2016

5:00 pm

www.genagg.ca

The Complete Source For All Your Aggregate Needs!

Sales  Rental  Parts  Service

204-697-9600 | 841 Oak Point Hwy, Winnipeg, MB 306-757-2400 | 18 McLeod Road, Regina, SK

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 19

Contact your local dealer:

Great West Equipment Vernon, BC (Head Office) 250.549.4232 Contact your local dealer: Campbell River, BC Dealer Name 250.286.0123 City, ST Cranbrook, BC 123.456.7890 250.426.6778 City, ST Fort St. John, BC 123.456.7890 250.785.4223 City, ST Kamloops, BC 123.456.7890 250.372.3996 City, ST Nanaimo, BC 123.456.7890 250.716.8804 City, ST Prince George, BC 123.456.7890 250.612.0255 City, ST Surrey, BC 123.456.7890 604.882.5051 City, ST Terrace, BC 123.456.7890 250.635.9033 City, ST Williams Lake, BC 123.456.7890 250.392.9599 City, ST Whitehorse, YT 123.456.7890 778.870.6955

One paver.

One million A close relationship withtons. your Guaranteed.* dealer means That’s reliability you can good about. downtime won’t keep youfeel up at night.

Smart Works.

Where will a million tons take your business? We think that answer is up to you and your 7000 Series paver. We’re so confident in the performance of our Volvo 7000 Series pavers that we guarantee you’ll get an incredible one million tons of asphalt laid. You get reliable results, ton after ton — and then some.

Talk to us today, or get the details* at volvoce.com/smartroads.

Dealer logo

173-1230 GWE_smartroad_MULTI_9.75x13.125_2.indd 1

1/15/15 11:40 AM

Page 20

Supply Post Western Canada Edition · supplypost.com

HEAVY DUTY PARTS & SERVICE

www.pennersheavyduty.com

CALL US TOLL FREE 24 HOURS A DAY, 7 DAYS A WEEK

1-800-663-8210

WE ARE CONNECTED TO OVER 800 DEALERS WORLDWIDE: LET US FIND THE PARTS YOU NEED! MAKE US YOUR FIRST SOURCE FOR ALL YOUR CATERPILLAR PART NEEDS!

FOR SALE CAT 950

TIMBERKING TK1100

CAT D7H

CALL US TODAY FOR PRICING!

WRECKING • JD 850 EXCAVATOR • CAT D7G W/RIPPER • CAT 140G GRADER • IT12B LOADER • 920 LOADER • 930 LOADER • D7E DOZER • D9G DOZER

FOR SALE

JOHN DEERE 648G 3000 MAGREGOR ROAD, PRINCE GEORGE, BC V2N 6E2

CAT 320L

Toll Free: 1-800-663-8210 | Office: 250-963-6600 |

New Game From John Deere Lets You Play With G-Series Skid Steers Fans and customers can test their operator skills with the Small Machine vs. Big Jobs Challenge. This interactive game from John Deere Construction & Forestry features the new G-Series Skid Steers and Compact Track Loader. Players choose from one of the four skid steer models or the compact track loader to then compete in three applications — construction, landscaping and livestock. Each level involves players swiping the machine into a target. Based on the speed of the swipe, a score will register in mph.

Players can advance through 10 levels, follow along with the fun through the real-time leaderboard and then share their scores via Facebook and Twitter.

“We’re excited to launch our new small-frame GSeries models to the market and wanted to invite customers and fans to get to know these machines in a different way,” said Graham Hinch, division manager, John Deere Com-

GET UP TO

Ken@Penners.cc - Cell: 250-961-0279 Matt@Penners.cc - Cell: 250-640-6834

April 2016

mercial Worksite Products.

“The Small Machine vs.

Big Jobs Challenge will familiarize players with the models in our lineup while having a little fun.”

John Deere previewed the Small Machine vs. Big Jobs Challenge at World of Concrete 2016 in Las Vegas. The game was played more than 260 times over the course of the show.

Players can access the Small Machine vs. Big Jobs Challenge from a personal computer or mobile device at fearthedeere.com. b Source: John Deere

Digital Edition www.supplypost.com

$30,500

IN TRADE REBATES* UP TO $1350 IN DEALER CREDIT APPLIED TO YOUR CAT® FINANCIAL COMMERCIAL ACCOUNT

OR

0.9%

FOR 60 MONTHS* UP TO $1350 IN DEALER CREDIT APPLIED TO YOUR CAT® FINANCIAL COMMERCIAL ACCOUNT

To learn more about the HUGE TRADE REBATES OR LOW RATE FINANCING AVAILABLE WHEN YOU PURCHASE YOUR NEXT CAT® COMPACT MACHINE, contact your Finning sales rep or drop by your local Finning dealer today. Offer available until June 30th.

*Offer valid from February 1, 2016 to June 30, 2016 on select new models, financed by Cat Financial, manufactured by Caterpillar Inc. Building Construction Products Division only at participating Cat dealers. Offer is available to customers in Canada only and cannot be combined with any other offers. Subject to machine availability. Machines sold in Canada by authorized dealers are priced in Canadian dollars and the price may take into account the exchange rate of Canadian dollars to U.S. dollars. Models shown do not necessarily reflect the exact model and configuration to which the promotion applies. Rebates of $1,350 CAD paid as a Cat Financial Commercial Account credit for BCP Core and $650 CAD credit for CCE machines. Trade rebates are based on a predetermined amount and may vary by model and will be in addition to the dealer appraised trade-in value. All financed machines are subject to credit approval and rate may differ based on creditworthiness. The Cat Financial Commercial Account credit applies to all BCP models and is provided through Cat Financial for use at participating Cat dealers. Prices do not include taxes, freight, set-up, delivery, document fees, inspections, additional options, or attachments. Final machine prices are subject to change. Offer may change without prior notice and additional terms and conditions may apply. Contact your Finning sales rep for full details.

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 21

GREAT NEW & USED INVENTORY! SALES & RENTALS • SCREENERS • CONVEYORS • CRUSHERS • AGGREGATE EQUIPMENT

1-800-960-9939 | 403-946-4860 | Fax: 403-946-5191

ALL NEW MCCLOSKEY 130’TELESCOPIC DESEGREGATION 2015 MCCLOSKEY J50 V2 50" x 29" Single Toggle Jaw w/ heavier flywheels & optimization. Class-Leading with the highest stockpile in its category.

STACKING CONVEYOR The only self-contained Deseg. conveyor on the market. Cat diesel powered c/w innovative computer control system. Low feed height, hyd. flip-over 5th wheel to swivel plate.

Quick & easy setup and programming. Leave the generator home!

2015 MCCLOSKEY J40 V2 2440 Jaw, weighs 75,000 lbs, has magnet, dust suppression, Cat diesel and hopper extension wings.

INTRODUCING 400 HP 2014 MCCLOSKE 512 RET Trommel Screener w/ remote radial conveyor and Cat diesel engine. Spiral drum and choice of screens.

621 MCCLOSKEY TROMMEL SCREENER Perfect for Topsoil, Compost, Sand, Removable Drum for Screen Change, Great Condition Used Unit Shown!

621 MCCLOSKEY TROMMEL SCREENER Perfect for topsoil, compost, sand, removable drum for screen change, great condition used unit shown!

18 CUBIC YARD FEEDER 36” to 42” discharge, adjustable Grizzly, hydraulic Grizzly and hydraulic tilt.

THE NEW 52” TYALTA TELSMITH CONE PLANT IOC

For more information CALL: 1-800-960-9939

R155 & R230 MCCLOSKEY SCREENERS great unit for heavy duty applications, use punchplate, fingers or bofar bars, new & used units available.

2014 MCCLOSKEY 36" x 80" Conveyor w/ hyd. axle jacks & ext., hyd. raise & lower, hyd. top fold & landing, road legal w/ air brakes & lights, diesel or electric.

R155 & R230 MCCLOSKEY SCREENERS Great Unit for Heavy Duty Applications, Use Punchplate, Fingers or Bofar Bars, New & Used Units Available.

2015 MCCLOSKEY R70 84 HP Tier III Diesel enging, compact high portability machine. High energy 4' x 9' screen box. Easily tackles a large number of smaller duty applications.

MCCLOSKEY C38R CONE CRUSHER Self contained closed circuit plant w/screendeck. Pairs perfectly with an S series screener. Available for sale or rental.

2015 36 x 100 DIRECT FEED STACKING CONVEYOR With hydraulic folding V-bin, comes standard with hydraulic landing gear and hydraulic top fold, Cat diesel engine.

SUPERIOR 24 X 125 PRSC Radial stacking conveyors complete with hydraulic raise/lower and under carriage. Pit portable!

In House Financing now available! Flexible terms and conditions.

Call Tyalta Finance today at 1-877-550-0016, finance@tyalta.com

www.tyalta.com | info@tyalta.com

Page 22

Supply Post Western Canada Edition · supplypost.com

Now opeN iN CANADA

IROCK Names Patton Southeast Regional Sales Manager

Rentals

“The upper structure rotates 360°!”

6 Models to Choose from: MST 3000 VD Payload: 33,060 lbs.

MST 2200 VDR Payload: 24,250 lbs.

MST 2200 VD Payload: 24,255 lbs.

MST 1500 VD Payload: 15,435 lbs.

MST 800 VD Payload: 10,584 lbs.

MST 600 VD Payload: 8,378 lbs.

60

April 2016

For pricing and availability contact:

J will Stayer

Regional Sales Manager Suite 107, 6704-41 Street Leduc, AB T9E 0Z4 403-391- 6450

I

Don’t Settle for Anything Less | morookacarriers.com Available from our warehouse in Canada!

IROCK Crushers, a leading manufacturer of screening and crushing equipment, hired John Patton as its southeast regional sales manager. Patton manages sales with a focus on setting up a dealer network and identifying rental and sale opportunities for dealers. His territory includes Alabama, Florida, Georgia, Mississippi, North Carolina, South Carolina and Tennessee.

“Patton shares our values of fully supporting dealers by not only providing quality crushing and screening solutions, but

Neuson’s district manager and metro jobsite specialist for more than eight years.

He established relationships with the dealer network and sold a variety of products, including asphalt and concrete equipment as well as climate control mechanisms, compact excavators, large mobile generators and loaders. “I look forward to helping our dealer network grow by providing productivity-enhancing crushing and screening solutions for their customers,” Patton said.

Patton lives in Gulf Breeze, Florida, with his wife, Jessica, and four children. When he isn’t traveling, he enjoys spending time with family, fishing and paddle boarding. b

also helping bring new customers through the doors,” said Sean Donaghy, IROCK’s national sales manager. “His customer service skills are a great asset to the IROCK team.”

Patton has a reputable track record of working with dealer networks and more than 15 years of experience in the equipment industry. Previously, as the regional sales manager for Yanmar America’s equipment division, he spent two years managing and building a dealer network in the Northeast and Midwest. Patton also served as Wacker Source: IROCK

ForesTech equipmenT Your Source for Pre-owned Logging equiPment

Yarders

Wheel loaders

1989 Cypress 6280 Swing Yarder, c/w: lines, 60’ boom, 2004 Caterpillar 966G Series II c/w log grapple, 26.5 rear entry side tilt cab, Cummins eng., 40’ gantry, two x 25 tires, ROPS cab, guarding ........................ $149,500 guy lines, mounted on Cypress hyd. drive D7 carrier w/24” hYdraulic excavators DBP. Recent major repairs, updates and tin work......CALL 1997 Hitachi EX300LC-3CLL, c/w: WBM BNT grapple, Madill 044 Swing Yarder, c/w: 2 grapples, lines, LL front, elevated rear entry cab on 70" riser, forestry rigging, radios, 60’ boom, tag winch set, Series 60 eng., guarding pkg with aux. fuel tank, high walker U/C with mounted on Madill B8 crawler carrier. ............. $97,500 28" double bar pads............................................ $29,500 2012 Volvo FC2924C, c/w: Two bkts, Rotobec grapple and heel rack, Q/C, hyd. thumb, hoe front, elevated rear 1992 Timberjack 450C Grapple Skidder, c/w: Decking entry cab, forestry guarding package, highwalker U/C blade, 30.5-32 tires, sweeps, ROPS cab, Cummins eng., w/28" DBP, 3,XXX hours, new U/C. .................$297,500 dual function arch w/Esco grapple, chains ......... $19,500 skidders

log loaders 2004 Caterpillar 330C, c/w: PMW grapple, heel rack, LL front, rear entry cab on 72” riser, forestry guarding package, highwalker UC w/ 28” DBP................$114,500

2011 John Deere 3754D “Road Builder” c/w: Two bkts, Q/C, hyd. thumb, hoe front, forestry cab on 8" riser, forestry guarding package, highwalker U/C w/ 28” DBP. 7,XXX hours. Recent new undercarriage.......... $219,500

We Keep Equipment Moving!

Call me today, I’ll be glad to help you! ~ Danny

2005 Volvo EC210BF, c/w: Two bkts, Rotobec power 2000 John Deere 330LC, c/w: Pierce grapple, heel rack, clam, Q/C, hyd. thumb, aux. hyd., hoe front, forestry LL front, rear entry cab on 72" riser, forestry guarding guarding pkg, highwalker U/C w/ 28” DBP. Parts machine package, high walker UC w/ 28" SBP. ................ $84,500 included. Call for details ...................................... $97,500 excavator drill

ReplAcemenT UndeRcARRIAge Morooka®, Bobcat®, Gehl®, Mustang®, Takeuchi®, CAT® 279, 289 & 299

» The #1 Selling Rubber Track Brand In America! »

800-365-7260

Order online anytime » depparts.com • Leduc, AB •

1999 Kobelco SK350MkIVLL, c/w: T-Mar grapple, heel rack, LL front, elevated rear entry cab, Cummins eng., forestry guarding package w/aux. fuel tank, high walker UC w/ 30" DBP. 1,180 hrs on rebuild by T-Mar Industries. Financing Available O.A.C. .............$274,500 1996 Caterpillar 322L, c/w: Young grapple, heel rack, LL front, side entry cab on 48” riser, forestry guarding package, high cap fuel tank, high walker UC w/ 28” DBP. ............................................................................ $29,500

1997 Komatsu PC300LC-6 Hoe Drill, c/w: CDC Excavator Drill package w/ Atlas Copco 1238 hammer, 17' slide, Q/C, hoe front, drill steel racks in catwalks, two mags, cab guard, saddle mounted fuel tank, std. UC w/ 24" DBP. ........................................................... $159,500 misc. truck 1999 Bell B-25B Articulated Dump Truck, c/w: 23.5R25 tires, ROPS cab, dump box, 10,437 hrs. . .......... $34,500 1999 Ford F-350XL 4X4 S/A Dump Truck, c/w: 7.3L V8 diesel, 6 speed, 12'L x 8'W dump body. ............ $14,750

4335 bbarge arge T Terminal erminal r rdd.. ccampbell ampbell r riVer iVer,, bc bc 4335 VisiT our websiTe For our Full inVenTory: www ForesTech ca

.

ContaCt: tim LLoyd 250-703-3551

.

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 23

CASE AUTHORIZED DEALERS Alberta

BIG MACHINES. SMALL PAYMENTS. HUGE ADVANTAGE.

ROCKY MOUNTAIN EQUIPMENT Calgary (403) 243-8600 Edmonton (780) 486-2273 Grande Prairie (780) 882-7637 Lethbridge (403) 327-3154 Medicine Hat (403) 528-3838 Red Deer (403) 341-4832 Taber (403) 223-2333

British Columbia THE INLAND GROUP Burnaby Langley Nanaimo Prince George

(604) 291-6021 (604) 607-8555 (250) 758-5288 (250) 562-8171

Manitoba

HITRAC (1974) Winnipeg

(204) 257-3000

New Brunswick MARITIME CASE Hanwell

(506) 455-2380

Newfoundland

MADSEN CONSTRUCTION Mount Pearl (709) 747-7841

Ontario

J.R. BRISSON EQUIPMENT Ottawa (613) 521-1910 Vars (613) 443-3300 KUCERA FARM SUPPLY Alvinston (519) 898-2961 Tecumseh (519) 739-0503 STRONGCO LP Brampton Grimsby Kitchener London Pickering Thunder Bay

(905) 791-3131 (905) 643-4255 (519) 744-3518 (519) 652-3234 (905) 428-3808 (807) 475-3052

TRACKS & WHEELS Sault Ste. Marie Sudbury Timmins

(705) 256-5438 (705) 566-5438 (705) 268-5438

Quebec

LONGUS EQUIPMENT Laval Levis Sherbrooke Varennes

(450) 628-4866 (418) 836-2225 (819) 843-3555 (450) 652-2552

Saskatchewan THE CASE HEAVY METAL LEASE IS BACK Get our top machines equipped with the industry’s leading maintenance coverage at rates that’ll fit any budget. For qualified buyers, there’s never been a better time to satisfy your appetite for heavy construction. See your dealer for leasing details. CaseCE.com/Metal

Dealer participation may vary. ©2016 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates.

REDHEAD EQUIPMENT Estevan Lloydminster Melfort Prince Albert Regina Saskatoon Swift Current

(306) 634-4788 (306) 825-3434 (306) 752-2273 (306) 763-6454 (306) 721-2666 (306) 934-3555 (306) 773-2951

Page 24

Supply Post Western Canada Edition · supplypost.com

April 2016

Coastal Timber Supply Chain Threatened, Communities At Risk

PARTS • SALES • SERVICE • RENTALS

2008 VOLVO G940 STK E001364 .....................$115,000

2005 VOLVO G740B ........................................... $75,500

2007 VOLVO L220E STK E002032 ....................$119,000

2008 VOLVO G970, STK E002132 ...................... $125,200

WARRANTY

D L SO

2006 VOLVO G970, STK C90 ............................$145,000

2008 JOHN DEERE 872D, STK E001366 ........$145,000

D L SO 1999 CHAMPION 740A, STK E001904 ...............$75,000

Toll Free:

1-800-663-0715

A mill shutdown in Port Alberni that resulted in close to 100 workers being laid off is symptomatic of a much larger problem as timber harvesting contractors up and down the BC coast are struggling to be sustainable in the face of consistently low rates.

Western Forest Products (WFP) Alberni Pacific Division mill sent home the workers due to a log shortage caused by the company’s dispute with coastal logging contractors.

“This week our warnings came true,” said David Elstone, RPF, the Executive Director of the Truck Loggers Association. “The TLA has been saying for some time that the large forest companies who control much of coastal BC’s public timber harvest are threatening the timber supply chain and putting rural communities at risk.”

WFP told shareholders that the quarterly earnings were 100 percent higher than a year ago, totalling 29.6 million dollars in a three-month period. Yet the company will allow harvest volumes to be impacted by between 5 and 10 per cent rather than share some of that profit with the independent, lo-

said Elstone. “It will ensure that the coastal forest industry supply chain remains intact and that local workers who rely on the industry to feed their families are not at risk. So we urge the community of Port Alberni to be patient,” Elstone said, “and show support for contractors who are trying to negotiate for the survival of their businesses in the face of a large corporation’s growing profits.” b

cal companies that actually harvest the timber for them.

“This dispute, the layoffs at the Port Alberni mill, the loss of work by the logging contractor involved in the dispute and the risk of further mill closures in the area are evidence of the issues our members are fac- Source: TLA ing,” said Elstone. “This is just the tip of the iceberg as far as rural community stability is concerned.”

“For TLA members, achieving business sustainability for their logging, road building and log hauling work is fundamental,”

The Professional’s Choice for Gouging, Piercing & Cutting

Remove Seized Pins Quickly & Easily Contact Us Today For More Information!

Phone: 403.286.3649 | Cell: 403.804.4360

4304-10 Street N.E., Calgary, AB T2E 6K3

Saratoga VentureS Ltd. 592 Lilac Cres., Campbell River, BC V9W 7G6 Phone: 250-286-3211 • Fax: 250-286-3284 svl@saratogaventures.com | www.saratogaventures.com

2011 JOHN DEERE 772GP, STK E002033 .........$198,500

EMPLOYMENT OPPORTUNITIES

JADE EQUIPMENT is presently looking for Shop & Field Mechanics for our Edmonton Branch. Please forward your resume to: admin@jadeequipment.com

James: 780-220-5524

sales@jadeequipment.com **O.A.C. + TAXES, $0 DOWN

1998 Freightliner FL60 shop Truck, equipped with V-mac underhood compressor, 265,000 km. $45,000.

Madill 123BC remanufactured august 2014.

Please Call for price and more info.

We Buy Salva Grad ge ers!

sales@jadeequipment.com • parts@jadeequipment.com

www.jadeequipment.com

EquipmEnT FOR saLE: • 1998 Freightliner FL60 shop Truck, equipped w/ V-mac underhood compressor, 265,000 km ..............$45,000 • 1987 Madill 122 Grapple Yarder. This machine comes with lines, blocks, and grapple. It has had some recent mechanical work, including mainline pull clutch gear. .............................................................$475,000 • 1,000G Water Tank, w/ valving & hand rails ..... $3,500

dIsManTlInG for ParTs: • 1992 Kobelco sK300 mark 2 Log Loader • (2) Pacific 30 Ton log Trailers • 630a Prentice feller Buncher • Pacific P16 log Truck and Trailer • Excavator Bkts • Madill Parts: 009, 044, 075 (rubber & Trk) • Madill 4800 Undercarriage • Clark axle Components & Parts BD 71,000 & 91,000 • Cat rB325l Excavator • Moxy 6200 rock Truck • Komatsu PC300-6 Excavator

WE SPECIALIZE IN USED PARTS & ATTACHMENTS FOR THE LOGGING INDUSTRY

TOLL FREE 1-888-668-1611

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Three Linden Comansa Cranes At Bauma 2016 Tower crane manufacturer Linden Comansa will show three of its most successful models at the upcoming Bauma trade fair, which will take place in the German city of Munich from April 11th to 17th. A luffing-jib crane and two with flattop design will be exhibited at the stand that Linden Comansa shares with its partner BKL Baukran Logistik GmbH, one of Europe’s largest crane rental, sales and service companies.

The demand of luffingjib tower cranes demand is rising in many parts of the world, and one of Linden Comansa’s goals in Bauma will be to continue promoting its extensive range of luffers, which consists of 12 different models, with maximum load capacities between 8 and 30 tonnes. For this purpose, the brand will expose a LCL280 luffingjib crane with maximum load of 18 tonnes, a mod-

el which also has versions of 12 and 24 tonnes. The LCL280 is one of Linden Comansa’s the most popular luffing-jib models, especially in the United Kingdom, the area of the Persian Gulf, and Southeast Asia. In addition, the LCL series of luffing-jib cranes to which belongs the exhibited model has been recently reviewed by the design team of Linden Comansa and comes with many improvements.

Flat-top crane 21LC750 is probably the model of greater success in the recent history of Linden Comansa, and will be also showcased at Bauma 2016. This crane of large capacity (24, 36, or 48 tonnes of maximum load) is suitable for work in industrial, infrastructure and mining projects.

Launched in 2009, this crane has been recently revised and optimized, and returns to Bauma after being exposed in the 2010 edition. All its fea-

tures (ease of erection, high speed hoist engines, reliability, etc) make this crane a favourite among customers of Linden Comansa from around the world. In fact, the 21LC750 has been sold in all continents and regions: Europe, North America, South America, Africa, Middle East, Asia and Oceania.

Linden Comansa will also be exhibiting at the Bauma show the flat-top model 11LC160, with maximum load of 8 tonnes.

The crane is part to the LC1100 series, which has been reviewed by Linden Comansa’s R&D Department and includes numerous improvements, such as the frequency control on the slewing movement or the space optimization on the slewing part. This crane is designed to offer better performance in the construction of smallsized industrial and commercial projects, and is especially successful in Central Europe countries, such as Germany, Switzerland and Austria.

The three cranes to be exhibited are just the tip of the iceberg of what Linden Comansa wants to

show to the market during the trade fair. Attendees to the Bauma show will also want to learn more about the new 21LC450 flat-top crane, the redesign of the cabins, the improvements in the LC2100 series, the launch of a new luffingjib crane by the end of year... According to Martín Echevarría, Sales Director of Linden Coman-

Page 25

sa, “Bauma is the perfect place to make contacts, find new distributors and show our products and services to the market. In addition, the fair helps us also to invite our clients and friends and further strengthen our relationship with them”.

Bauma 2016 31st international trade fair for construction machinery,

www.rollinsmachinery.ca E-mail: don@rollinsmachinery.ca

Cummins 6.7 Tier 3 engine ZF Automatic 6 speed transmission 22 Ton capacity 11.7 PSI ground pressure fully loaded 800/45x30.5 Floatation tires Hydraulic front suspension

Langley: (604) 533-0048

VAC-CON Combination & Excavator Trucks

Your BC Dealer for Vac-Con Combination and Excavator Trucks New Demo truck is in stock and we invite all Contractors and Cities to arrange a Demo.

OTHER PRODUCTS AVAILABLE CONTACT US TODAY! environmental group

Service Centres: Langley • Chilliwack • Parksville • Vernon

1-800-665-9060 Toll Free: 1-800-665-9060

Hydrema Earth Moving Equipment is developed and built in Denmark.

With 52 years of industry knowledge, Hydrema is one of the world’s leading suppliers of specialized earth moving equipment in the world.

• • • • • •

Source: Linden Comansa

Rollins MACHINERY LIMITED

ARTICULATED DUMP TRUCKS 22T EARTH MOVERS

building material machines, mining machines, construction vehicles and construction equipment April 11th to 17th 2016, New Munich Trade Fair Centre - Munich, Germany, Linden Comansa and BKL Baukran Logistik GmbH: Open air area, booth 1103/1. b

12T DUMP TRUCKS

The Hydrema 912 D has a host of features designed to improve operator safety and output.

• Low net weight • High payload • Optional rail wheels

DISTRIBUTORS WANTED IN B.C. CALL FOR DETAILS!

12T FLAT BED

The Hydrema 912 HM flat bed carrier provides extraordinary off-road accessibility and the lowest ground pressure in the market.

• 8’ x 12’ tilting deck • 80 / 40-30.5 flotation tires • Low ground pressure of 8 psi

DEMOS AND RENTALS AVAILABLE • SERVING WESTERN CANADA

www.hydrema.ca · sales@hydrema.ca · 1-877-318-4581

Page 26

Supply Post Western Canada Edition · supplypost.com

April 2016

RM Presents New Technical Innovations At bauma 2016

GOT A BEAST OF A JOB?

RUBBLE MASTER, the world leader in mobile compact crushing, expand their product range and present the latest RM innovations at bauma 2016.

Continuing the legacy of the past 25 years, high level customer benefits and an understanding of individual customer requirements are the focus of RM’s technical innovations.

RM Compact Crushers, with their innovative concept and premium quality, enable you to recycle C&D waste and natural rock effectively and directly on site. A variety of materials

RM GO! Principle and will be demonstrating an ingenious new tool, among other highlights, at the bauma show. This completely new tool enables even more efficient use of RM mobile crushers.

A total of four RM crushers will be on display at bauma. In addition, the new generation of mesh deck screens and the hydraulic pivoting refeeding belt will also be there. b

ranging from brick production waste and broken asphalt or concrete to construction debris can be efficiently recycled to make high-quality building materials. Even the most stringent specifications in terms of compliance with exhaust regulations in mining and Source: Rubble Master tunnel building are met in full by the electric powered RM TWO GO! Crusher.

The RM GO! Principle has become a proven success in recent years thanks to its straightforward setup and intuitive operation.

The RM Innovation Team continues to develop the

People you Trust

Service you Deserve

S

MMER SHEARFORCE HA

TAKE REFUGE IN THE HEAT OF BATTLE. Bobcat® pressurized cabs provide a best-in-class seal.

Dust and dirt can’t get in, and you get a comfortable victory every time.

Less cost with the same quality as competitive brands

HARD HITTING, DURABLE, AND RELIABLE

EXPERIENCE OUR CAB. Visit Bobcat.com/Comfort1 Bobcat ®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. ©2016 Bobcat Company. All rights reserved. | 49038-8

Authorized Bobcat Dealers

ALBERTA

Williams Machinery, LP

Calgary

250-491-2939 • 877-491-2939

Edmonton

250-563-0181 • 888-763-0181

Red Deer County

604-930-3300 • 800-667-1733

Cervus Equipment 403-243-2011 780-447-4441 403-346-9011

www.cervusequipment.com

BRITISH COLUMBIA Westerra Equipment, LP

Kelowna

Prince George

Vernon

www.williamsmachinery.com

MANITOBA

Abbotsford Kamloops

204-728-2699

www.candcrentals.com

Nanaimo

NORTHWEST TERRITORIES

250-314-3600 • 888-314-3601 250-716-0443 • 877-700-0024

Victoria

250-478-8860 • 877-478-8860 www.westerraequipment.com

ttachm Own Or Rent Your A

250-545-0609 • 877-945-0609

Bobcat of Brandon

604-850-7313 • 800-563-7313

ent Today

Surrey

Brandon

Ron’s Equipment Rental & Industrial Supply

Compactors Xcentric Rippers

The Best Tool for Excavating Rock, Concrete, and Frozen Ground!

Crusher Buckets Rubble Master

REMU Screening Buckets

Compact Crushing Equipment

Yellowknife

867-766-6025

www.ronsauto.ca

SASKATCHEWAN Bobcat of Regina, Ltd. Regina

306-347-7600 • 888-724-3217 www.bobcatofregina.com

Your Attachment Specialists

1.800.255.5211 • shearforce.ca

April 2016

Supply Post Western Canada Edition 路 Our Readers Are Your Buyers

Page 27

PERFORMANCE

WHEN IT MATTERS, TO GET THE JOB DONE

The more things change, the more they stay the same. For over 70 years, DRESSTA redefined what was possible with a bulldozer.

Today, the bar continues to be set with the M Series and R Series bulldozers. Are you looking for the best bulldozer on the market?

Contact your local dealer today to see what a DRESSTA bulldozer can do for you. No dealer in your area? Call 1 (844) DRESSTA for support.

Campbell River | Cranbrook | Fort St. John Kamloops | Nanaimo | Prince George | Terrace Vancouver | Vernon (HQ) | William Lake (250) 549-4232 www.gwequipment.com

333 Holden Street Winnipeg, MB R2J 3W3 204-257-4767 www.k4equipment.com Acheson | Calgary | Fort McMurray | Red Deer | Grande Prairie (877) 948-3515 www.strongco.com

PURE PERFORMANCE

POWERFUL

RELIABLE

www.dresstanorthamerica.com

VERSATILE

Page 28

Supply Post Western Canada Edition · supplypost.com

CLAC Applauds BC Hydro’s Commitment To An “Open” Site C Project completion of the $3 billion Port Mann Bridge Highway 1 Project, CLAC members in the construction industry were excited to learn of BC Hydro’s decision to

CLAC members in British Columbia are ready to apply their skills to another landmark project, the Site C Clean Energy Project. On the heels of the successful

award the contract for the main civil works portion of Site C to a consortium including CLAC signatory Petrowest Corporation.

On Wednesday, November 25, BC Hydro announced that the Peace River Hydro Partners proponent group had been awarded the contract. The partnership consists of Petrowest, local to Fort St.

TRADE-IN YOUR OLD POWER CLAM FOR A NEW ONE! WE STOCK NEW & USED POWER CLAM CYCLINDERS AND RAKES OF ALL SIZES OIL FIELD PRODUCTS • EXCAVATORS • WHEEL LOADERS • SKID STEERS Shale Augers Bins Dryers Gensets Fops Guarding Mat Grapples Pallet Forks Pipe Handlers Pipe Pole Grapples New & Used Power Clams Quick Changes Rippers Spoons Thumbs Snow blades

John, as well as ACCIONA Infrastructure Canada Inc. and Samsung C&T Canada Ltd. “We have already received a large volume of calls from members in the region,” says Josh Pastoor, CLAC regional director in Fort St. John. “We have thousands of members in the construction industry in this province. We anticipate that our BC member centres will be very busy connecting skilled tradespeople with employment opportunities in the upcoming weeks and months.”

CLAC members have completed numerous major projects in the Peace River region, including the Fort St. John Hospital, Saturn 1, and Saturn Sister gas plants. To meet the needs of its growing membership, CLAC established a member centre in Fort St. John in 2006.

“This project will provide long term employ-

April 2016 ment opportunities for our BC members, residents of the Peace River region, First Nations peoples, and skilled tradespeople throughout the province,” says David Prentice, CLAC BC director. “We applaud the government and BC Hydro for their commitment to the open site model. The largest project in the history of the province should remain open to all British Columbians, and that is exactly what this model ensures.”

The CLAC Training and Jobs Teams will be partnering with Petrowest to source and support skilled labour for the project.

CLAC has a strong history of providing key support in communities throughout the province, assisting with recruitment and sourcing programs to ensure that local applicants can capitalize on such career opportunities.

“Our partnerships with trainers, industry, and

communities throughout the province, including those with First Nations, enable us to offer essential skills and safety training as well as financial and practical support to tradespeople, apprentices, and those seeking to enter the trades,” says Larry Richardson, CLAC Training director for BC. CLAC expects to provide such services to hundreds of Site C’s skilled workers throughout the duration of the project.

“Many British Columbians will be able to advance their careers as a result of the decision announced on Wednesday,” says Prentice. “Since the early stages of Site C planning, our goal has been to advocate for access to the project on behalf of thousands of skilled workers in our province, and we are confident that they will seize the opportunity.” b Source: CLAC

NOW ACCEPTING WASTE CONCRETE & ASPHALT IN SURREY, BC

250-573-2748

CALL US T O D AY FOR PIC K UP AN D DELIVER Y R AT E S !

3" Minus & 1" Minus Recycled Concrete or Asphalt Available!

Tel: 778.874.8891 | kyle.dolan@pacificsite.org

ALL AVAILABLE FOR RENT THROUGH RUSH RENTALS LTD.!

TYSEAMFG@HOTMAIL.COM | WWW.TYSEAMFG.COM

Civil Contractors · Aggregate Processors · On Site Concrete Suppliers

Visit us at Booth FS.909

MAXIMIZING YOUR INVESTMENT What do the smallest Ammann plate compactor, the largest asphalt plant and every product in-between have in common?

• Innovation that boosts productivity and efficiency, ultimately improving your bottom line • Parts and components that ensure long life to maximize your investment • The commitment of a family business that has thrived in the construction industry for nearly 150 years by keeping promises today – and knowing what customers will need tomorrow For additional product information and services, please contact your local Ammann dealer.

Alberta – Williamson Equipment Ltd. Tel 780-450-0055, gwill@williamsonequipment.com | British Columbia – Westerra Equipment Tel 800-563-7313, www.westerraequipment.com Manitoba – CUBEX Ltd. Tel 204-336-0008, ammannsales@cubexltd.com | New Brunswick – Maritime Case Ltd. Tel 506-455-2380, chase.mcgrath@maritimecase.ca Newfoundland – Madsen Construction Equipment Tel 709-747-7841, info@madsenconstructionequipment.ca | Ontario – Construction Equipment Solutions Tel 905-420-2243, ceswiles@hotmail.com Ontario – McDowell Equipment Tel 705-566-8190, www.bmcdowell.com | Ontario – Top Lift Enterprises Tel 866.TOP.LIFT, www.toplift.com Quebec – Équipements FDS Inc. Tel 800-361-3346, www.equipementsfds.com | Saskatchewan – Bobcat of Regina Tel 306-347-7600, b.macfarlane@bobcatofregina.com GMP-1340-00-EN | © Ammann Group

MEET THE AMMANN FAMILY OF PRODUCTS

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Western Global Introduces Abbi Mobile Refuellers To North America Western Global, a leading fuel and fluid storage manufacturer, is excited to introduce the Abbi line of fuel transport tanks to North America. Originally released in 2001 in the UK and Europe, the popular Abbi range has been improved and updated to bet-

?

Can’t find what you’re looking for?

We have many more listings on our website!

supplypost.com

introduced to North America along with the standard models. Commended for efficiency by the Plantworx Association in 2014, this double-walled tank features dual compartments to store both fuel and diesel exhaust fluid (DEF). To meet the challenge posed

by DEF’s susceptibility to contamination, the Abbi Blue has a separate poly tank and pump cabinet for DEF, providing a closed environment for the fluid to be stored and eliminating the worry of cross contamination between fluids.

With the introduction of Tier 4 machinery, construction and industrial operators are now faced with the challenge of having to safely transport and handle DEF. Using one mobile unit for both fuel and DEF provides greater efficiency in refuelling equipment and less down time on the job site.

Abbi’s are available for pre-booking now with units available in May. Visit www.western-global. com to learn more about the Abbi range and to contact us for more information. b

ter serve the rental industry, including its recently achieved global approvals.

The Abbi mobile refueller is a trailer mounted fuel storage tank that offers many of the benefits of other Western Global products, such as the TransCube. Available with capacities ranging from 1,000 to 2,900 litres, the Abbi is double-walled and fully certified for the safe storage and transport of fuel under ULC, UL and UN approvals. Key features of the tank include: • Secure, lockable equipment cabinet to enclose pumping and dispensing equipment • Direct access into the inner tank via access manway for cleaning and inspection • Mobile design with internal baffles for safe transportation • Forklift pockets for easy manoeuvring The newest member of the European Abbi range, the Abbi Blue, is also being Source: Western Global

Page 29

604-946-1856

7423 Wilson Avenue, Delta, BC . V4G 1E5

FOR SALE OR RENT 2015 Leeboy 8515,

LOW HOURS

Paves from 8' – 15' wide Option Selections: Engine: Kubota 4i (1009362) Track: Poly Pad Track (1009869) Screed: 8515 Electric (1004915) Endgate: Std. Endgate (1011313) Standard Features: Tier 4i Engine, Electric Hydraulic Controls (Left & Right Sides), Vandalism Protected Control Panel.

$178,000 LOW HOURS

LOW HOURS

$425,000

CALL

Vacall AllExcavate (Hydro Exc. Unit), 1300 gal. alum. water tanks, 12 yd3 galv. debris body, Roots 11x25 DVJ vacuum pump.

2015 Roadtec RP-175, 8'-15' paving width, rubber track paver, CAT C6.6 engine, Carlson EZ-IV Screed.

Smooth & Padfoot Available

NEW

Smooth & Padfoot Available

NEW

$146,700 Dynapac CA2500D (4.5), 84" Drum, Comfort Cab, 10,300kg, 24V, auto vib control, back-up alarm.

$122,400 Dynapac CA1500D, 66” Single Drum, Comfort Cab, 7,200 kg, adj seat, back up alarm, brake release.

WWW.CUBEXLTD.COM Authorized Doosan Dealers

UNMATCHED

5 7500 YEAR

HOUR

POWERTRAIN + HYDRAULICS

FACTORY WARRANTY*

ALBERTA

Brown’s Industrial Lloydminster 780-826-2399

www.brownsequipmentsales.com

Doosan of the Peace Grande Prairie

780-538-0791 • 855-538-0791 www.doosanofthepeace.ca

Lift Boss, Inc. Calgary

403-301-0041 • 877-474-1470

Edmonton

780-474-9900

The numbers don’t lie. The Doosan 5-year/7,500-hour powertrain plus hydraulics factory warranty is the strongest in the industry. Rest assured knowing we’ve got you covered.

Run stronger. Run with confidence.

Unlock the industry’s best offer before it’s gone.

DoosanEquipment.com/Warranty11

www.liftboss.ca

BRITISH COLUMBIA Doosan of the Peace Fort St. John

250-785-1197 • 855-785-1197 www.doosanofthepeace.ca

Westerra Equipment, LP Abbotsford

604-850-7313 • 800-563-7313

Nanaimo

250-716-0443 • 877-700-0024 www.westerraequipment.com

MANITOBA

AgCon Equipment Springfield

204-255-4772 • 855-222-9216 www.agconequipment.ca

NORTHWEST TERRITORIES Ron’s Auto Service, Ltd. Yellowknife

867-766-6025

www.ronsauto.ca

SASKATCHEWAN

*Offers expire 05/31/16. Available at participating and eligible dealers only. Offers available on new Tier 4 compliant equipment in US and Canada only. Some restrictions apply. See dealer for details. Prior purchases not eligible. Administrative fees may apply. Warranty offer not available to national accounts. Doosan reserves the right to extend or discontinue any of these programs at any time without prior notice.

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2016 Doosan Infracore Construction Equipment America. All rights reserved. | 49040-1

Earthworks Equipment Corporation Saskatoon

306-931-7880

doosan.kubotaofsaskatoon.com

Page 30

Supply Post Western Canada Edition · supplypost.com

Governments Support Local Fruit And Vegetable Puree-Processing Company The governments of Canada and Manitoba will invest more than $582,000 in unique, state-of-theart equipment so a local company can transform Manitoba-grown produce into nutritious and flavorful purees, Federal Agriculture Minister Lawrence MacAulay and Manitoba Agriculture, Food and Ru-

ral Development Minister Ron Kostyshyn announced today.

Canadian Prairie Garden Puree Products Inc. have acquired new equipment and modified their existing operation in order to cook more types of fruits, vegetables and pulse crops like chickpeas, navy beans and len-

tils, then rapidly chill and package the pureed products into sterile pouches.

They are the only company in the world with this technology, which is more cost-effective and environmentally-friendly than traditional processing methods. The technology also ensures the purees retain better co-

lour, flavour, texture and nutritional benefits without any preservatives or additives.

Minister Kostyshyn noted this investment also supports the Manitoba government’s goal of creating a $5.5 billion food processing industry by 2022, which is currently at $4.95 billion.

The company’s expansion, allows them to purchase millions of tonnes of culled vegetables that might otherwise be sent to a landfill or sold at a lower price for animal feed. In five years, the company plans to expand from nine employees to nearly 60.

The company, located

AGGREGATE PROCESSING AT ITS FINEST

Equipment You Can Bank On!

Hall B2 - Stand 249

2011 MB BF90.3 Crusher Bucket – 250 WB Adapter, Input (in) 35" x 21", Output (in) 1" - 5". $55,000 CA

2007 CAT 345CL Excavator Bucket, Breaker/Hopac Hydraulics, 400WB Adapter, 7360 Hrs. $160,000 CA

Allied 750CS Breaker - 200 WB Adapter, 4.5 Cross Chisel, Hoses & Couplers $18,000 CA

SALES | RENTALS | PARTS | SERVICE | FINANCING

TERRAFIRMA EQUIPMENT SALES & RENTALS INC. E: terrafirma@telus.net | 888-876-9724 | terrafirmaequipment.com 18104-111 Avenue, Edmonton, AB T5S 2R1

April 2016 at the Food Development Centre in Portage la Prairie, has received several awards in 2015 for their products including for Best New Product at the Manitoba Food Processors Association’s awards and a “NEXTY” award at the Natural Products Expo West in California.

The purees can be sold to other food manufacturers and other food service customers. The company’s unique process allows purees to be stored at room temperature for up to two years. The sterile packaging system also uses 30 per cent less water and energy than other processes currently in use in the industry.

Government funding represents 50 per cent of the cost of the new equipment. The Growing Value program provides financial assistance to help existing agri-businesses adapt to market forces and environmental considerations, increasing their ability to compete in domestic and international markets.

The federal and provincial governments are investing $176 million in cost-shared programming in Manitoba under Growing Forward 2, a five-year, federal-provincial-territorial policy framework to advance the agriculture industry, helping producers and processors become more innovative and competitive in world markets.

Quotes “The Government of Canada is committed to supporting Canada’s producers and food processors. Investments such as

this help promote growth in our Canadian agricultural industry and increasing income opportunities for farmers.” - Federal Agriculture Minister Lawrence MacAulay “Manitoba’s food processing sector continues to grow, driven by new ideas, technology-savvy entrepreneurs and consumer demand for foods and drinks that are nutrient-dense,” said Minister Kostyshyn. “This creates new jobs, strengthens the rural economy and encourages growth throughout the entire agricultural industry.” - Manitoba Agriculture, Food and Rural Development Minister Ron Kostyshyn “I am very proud of the good work our team has done in building this world-class food processing business. This type of value-added agri-business is a very important part of the community. We are creating jobs, building innovation in food processing and creating more opportunity for area farmers to sell their crops not only locally but around the world. This funding is critical to the success of small businesses like ours. My partners, Harvey and Martin Pollock and I are very grateful to receive it and will put it to work, growing and expanding our young business.” - Chief operating officer and owner of Canadian Prairie Garden Puree Products Inc., Kelly Beaulieu. b Source: Gov’t of MB

EQUIPMENT SALES & SERVICE

1-800-661-1157 | (604) 946-ESS1 (3771) BC Interior Ray Gouthro Call 24 Hours - 250-371-1456 BC Lower Mainland Barry Edmondson - 604-764-8843

BERCO SPECIALS

“200” Track Groups c/w 26” & 28” 3-bar Case 850D Track Groups c/w 24" 1-bar PC400 Track Chain

for Call us ty quali u Komatsket ar afterm s! part

USED & NEW SURPLUS

“330” Track Groups c/w 32” 3-bar Cat “330” Track Chain (turned P&B) Berco “400” Forestry Tracks c/w 28” HD 2-bar Berco “400” Excavator Tracks c/w 36" 3-bar

www.essltd.com

8029 River Way, Delta, BC V4G 1L3

April 2016

Supply Post Western Canada Edition 路 Our Readers Are Your Buyers

Page 31

Page 32

Supply Post Western Canada Edition 路 supplypost.com

0 0 0

*

$

April 2016

% Financing

*

Down

*

Payments until July 2016 Over 100 eligible units * Select CASE and LBX machines. OAC

Campbell River 250-287-8878

Cranbrook 250-426-6205

Fort St. John 250-785-6105

Kamloops 250-374-4406

Kelowna 250-769-2933

Langley 604-607-0300

Nanaimo 250-758-5288

Penticton 250-492-3939

Prince George 250-562-8171

Quesnel 250-992-7256

Terrace 250-635-2292

Vernon 250-545-4424

Williams Lake 250-392-7101

Whitehorse, YT 867-668-2127

Visit our website for a complete list of used equipment for sale. www.inland-group.com

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER

SECTION 2

WWW.SUPPLYPOST.COM APRIL 2016 · PAGE 33

Call Toll Free in Western Canada:

1-888-852-9021

1984

ANNIVERSARY

2016

POWERSCREEN PREMIERTRAK 300 JAW CRUSHER 24" X 40" JAW, TRACK MOUNTED, CAT POWER. DIRECT DRIVE JAW = FUEL SAVINGS. AVAILABLE FOR SALE OR RENT.

NEW & USED • SALES • RENTALS • PARTS & SERVICE Washing SYSTEMS Systems WASHING

TELESTACK HF520 TRACK MOUNTED FEEDER

Variable Speed, Extended Hopper. Available for Sale or Rent.

Matec Dealer for BC, AB & SK

2011 POWERSCREEN WARRIOR 800 $145,000

4' x 9' Double Deck, 3 On Board Conveyors, Deutz Air Cooled Diesel, Track Mounted, Excellent Condition.

WWW.FOREMANEQUIPMENT.COM

Page 34

Supply Post Western Canada Edition · supplypost.com

SALES & RENTALS • 1-800-205-6633 • 604-671-1066

April 2016

SCREENS

Call us for your new and used screening & crushing equipment needs

bill@skreenquip.com • www.skreenquip.com TEREX FINLAY C-1545 HIGH CAPACITY CONE CRUSHER

L L I B L L CA -1066

604-671

J-1175 TRACKED MOBILE JAW CRUSHER

1170AS TRACK JAW CRUSHER

Ideal for quarrying, mining, demolition & recycling.

44" x 28" Compact aggressive track jaw crusher.

883/883+ TRACKED MOBILE SCREENER

TEREX FINLAY 693+ 20' X 5' DOUBLE DECK SCREEN BOX

16' X 5' DOUBLE DECK Up to 500 tonnes/hour.

111 HP Cat water cooled engine.

NEW & USED EQUIPMENT AVAILABLE - CALL BILL AT 604-671-1066 SKREENQUIP SALES IS WESTERN CANADA’S AUTHORIZED EZYSTAK DEALER

Piano Wire Screens For All Makes Available

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 35

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

SERVICE TRUCKS IN STOCK AND READY TO WORK PETERBILT 4X2 REGULAR CAB

FORD F-550 REGULAR CAB 4X4

FORD F-550 CREW CAB 4X4

PETERBILT 4X4 REGULAR CAB

w/14' service body, Viking 65, Cobra 11000 (unit 1885)

w/11' service body, VR70, Cobra 5500 (unit 2699)

w/11' service body, Cobra 5500, VR70 (unit 2288)

w/12' service body, Viking 65, Cobra 11000 (unit 2013)

DODGE 5500 REGULAR CAB 4X4

PETERBILT 4 X 2 REG CAB

FORD F-550 CREW CAB 4X4

FREIGHTLINER M2 4X4 EXTENDED CAB

w/11' service body, Fassi F65, VR70 (unit 2526)

w/17' lubrication body, Predatair 60, 9 products (unit 2118)

w/9' service body, VR70, Cobra 3300, Rafna Hi-Rail (unit 2417)

w/14' hybrid service body, Predatair 60, Cobra 12000 (unit 2267)

FREIGHTLINER M2 4X4 EXTENDED CAB

FREIGHTLINER M2 4X4 EXTENDED CAB

INT’L TERRASTAR 4X4 EXTENDED CAB

DODGE 5500 REGULAR CAB 4X4

w/12' service body, Cobra 11000 Tiger 45 (unit 2012)

w/14' hybrid service body, Cobra 12000, Predatair 60 (unit 2266)

w/11' service body, VR70, Cobra 5500 (unit 2413)

w/11' oilfield deck, Fassi F65 (unit 2222)

DODGE 5500 CREW CAB 4X4

KENWORTH REGULAR CAB 4X2

PETERBILT 4X2

FREIGHTLINER M2 4X4 EXTENDED CAB

w/11' service body, Cobra 5500, VR70 (Unit 2141)

w/14' service body, Predatair60, Cobra 11000.3 (unit 2702)

w/11' service body, Predatair 60, Fassi F155A.0.25 (unit 2117)

w/12' service body, Cobra 11000, Predatair 60 (unit 2381)

DODGE 3500 4X4 CREW CAB

FREIGHTLINER TRIDEM REGULAR CAB

FORD F-550 REGULAR CAB 4X4

DODGE 5500 CREW CAB 4X4

w/8' service canopy (unit 2205)

w/Fassi F660RA.2.28 (unit 2182)

w/11' service body, Cobra 4400, VR70 (unit 2525)

w/11' service body, VR70, Cobra 5500 (unit 2287)

FREIGHTLINER 6 X 4 REG. CAB

DODGE 5500 CREW CAB 4X4

DODGE 5500 4X4 CREW CAB

DODGE 5500 4X4

w/21' lubrication body, Predatair 60, 10 products (unit 2126)

w/11' workshop body, RaptairMF (unit 2252)

w/11' service body, VR70 (unit 2176)

w/oilfield deck, Fassi F80A.0.24 (unit 2306)

www.brutusbodies.com

Page 36

Supply Post Western Canada Edition · supplypost.com

Sennebogen Introduces New Timber Handling Solutions The introduction of four key Sennebogen material handling machines at one of the world’s largest pulp and paper facilities has helped cre-

ate a substantially more efficient operation for the Pedersen Group, a mill service provider.

The range of log handling equipment Peder-

sen implemented at its Tasman Mill operation is truly comprehensive; encompassing both the smallest and the largest material handlers, the Sennebogen 818 and the Sennebogen 880 EQ. Pedersen Group provides a vital production link in terms of log yard logistics, mobile plant operations and whole log

SPECIALIZING IN NEW & USED UNDERCARRIAGE PARTS EQUIPMENT RENTALS & REPAIRS TRACK PRESS FACILITY, IDLER REBUILDING 594 Chilcotin Road, Kamloops, BC V2H 1G5

EQUIPMENT FOR RENT OR SALE • • • • • • • • •

2015 Komatsu PC170LC-10, 2 buckets, thumb, cab guard, New Machine!

2012 Komatsu PC200LC-8, 2 bkts, thumb Q/C, exc. cond., 1,700 hrs.

2007 Komatsu PC200LC-8, 2 bkts, thumb, Q/C, cab guard, new cond., 1100 hrs.

2007 Cat 330 DL, Excellent condition, 2 bkts, thumb, catwalks & cabguard.

Komatsu D65EX-12, angle dozer, sweeps/guarding, winch, new U/C. Komatsu PC95R-2, 2 bkts, Q/C, thumb and blade. (New rails & sprockets).

Dynapac CA362D, 84" smooth drum, cab, A/C, 2,000 hrs, like new.

Bomag BW177 DH-3, 66" smooth drum packer, excellent condition.

Dresser TD8E, 6-way blade, sweeps, ripper or winch available.

SOLD

FOR RENT

2012 Hamm 3412, 84” smooth drum/padfoot, cab, A/C, exc. cond.

USED UNDERCARRIAGE • Cat 330 U/C, Bottom Rollers, Rock Guards, Idlers, Track Adj’s & Spring Assemblies • ZX270/330 TGAs, 32" 3 Bar, 70% Rem. • Cat 330 28" 2 Bar Pads (Full Set) INVENTORY • Deere 2154 TGA’s 28” 2 bar 80% Rem. OF USED • Deere 2154 28" 2 Bar Pads (Full Set) UNDERCARRIAGE • EX200LC/PC200LC TGA, 28” 2 Bar Pads CALL NOW! • Cat D7 G, R Bottom Rollers S/F & D/F • T.Cat 870 / Deere, 959 track spring assy rebuilt • ZX200 (Rebuilt) Track Adj. Assembly

HUGE

FOR SALE

Toyota 7FGU25, 5,000 lb. forklift, 3 stage mast with side shift, exc. cond. $13,000.

Fax: (250) 374-5126 Email: traktech@telus.net EVES: Regan Zurowski (250) 371-1444 • Chad Zurowski (250)371-7535

Phone: (250) 374-5054

chipping and debarking services at the Tasman Mill, located on a 500 acre (200 ha) site near the Bay of Plenty town of Kawerau in New Zealand’s North Island. The mill site hosts pulp production operations for both CHH Pulp & Paper and Norske Skog.

“Moving to Sennebogen started a number of changes in our operation. The strength, reliability and innovation of the Sennebogen units allowed us to look at our fixed and mobile plant and to reconfigure our yard for maximum efficiency,” said Pedersen’s Kawerau Site Manager Marty Hine.

Electrically Driven Sennebogen 818 as Comfortable Control Centre At the smaller end of the scale, a pedestal mounted, electric drive Sennebogen 818 acts as the control centre for the debarking drum and conveyor feed into a 3000 hp multi-log chipper.

“The hydraulic elevating cab raises and lowers so the operator has excellent vision of what’s coming from the power infeed, through

April 2016 the debarker and down the conveyor in front of him,” said Hine.

“Essentially the 818 is the nerve centre for the whole plant, with the operator using a touchscreen and joystick controls in the oversized cab to control product flow at variable speeds and deal with jams using the 818’s grapple.”

Sennebogen 880 EQ Provides an Enormous Working Radius The electric drive Sennebogen 880 EQ is one of the world’s largest material handling machines.

Pedersen’s unit weighs in at over 600,000 lb.

(275,000 kg). Sitting on a 16 ft. (5 m) pylon and paired with a 99 ft. (30 m) boom, the operator’s view is at over 36 ft. (11 m).

While offering all the efficiency benefits of electric power, the machine is still mobile as it sits on crawler tracks and goes 110 ft.

(33.5 m) with a tether.

Hine said he is impressed with the precision of the Sennebogen 880 EQ and cited the balance the machine exhibits, regardless of load, as exceptional.

Even at the 880 EQ’s full reach of 99 ft. and with

$

/MO

$

/MO

$

/MO

the total weight in the grab of 26,500 lb. (12,020 kg), the machine is rock steady, he said. This is due to Sennebogen’s equilibrium design, with a moving counterweight to help keep the load cantered. The long reach of the Sennebogen 880 EQ can unload from the trailers straight into the power infeed, or across to the storage area.

Sennebogen 830 Trailer Puller Improves Log Yard Logistics Alongside the supersized handling capacities of the Sennebogen 880 EQ are two Sennebogen 830 M-T log loaders. The 830 M-Ts are the only log handlers that can tow 132,250 lb.

(59,987 kg).

“Before the Sennebogen 830s arrived we were using wheel loaders, which can’t stack as high as the 830s can. Wheel loaders can’t tow either, so we’re moving more logs and stacking them more efficiently with a bookend system. The way we use space within the yard has improved dramatically,” said Bruce Hutchins, project lead.

“This reconfiguration also eliminates our old log deck Continued on page 38

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 37

Unreserved public equipment auctions 60 0+

20 0+

2007 Lee-Boy 685B | Truro

2012 Caterpillar 950H | Truro CR AW LE RT RA CT OR S

47 0+

13 0+

AR TIC UL ATE DD UM PT RU CK S

2015 Hitachi ZX290LC-5N | Truro

WH EE LL OA DE RS

MO TO RG RA DE RS

77 0+

HY DR AU LIC EX CA VA TO RS

Special limited-time financing offer! No payments for 90 days*

2013 Caterpillar 329EL | Grande Prairie

2012 Volvo A40F 6x6 | Edmonton

2012 Caterpillar D8T | Edmonton

2011 Caterpillar D6T LGP | Grande Prairie MO TO RS CR AP ER S

21 0+

2 – 2011 Caterpillar 730 | Grande Prairie

4 – 2007 Caterpillar 621G | Edmonton

55,000+ items in 148+ auctions including Truro, NS Ottawa, ON Grande Prairie, AB Edmonton, AB Prince George, BC Toronto, ON Montreal, QC

Apr 6 Apr 13 Apr 14 Apr 26–28 May 3 May 11–12 May 25–26

Bid in person or online

▸ No minimum bids or reserves ▸ Test and inspect on-site ▸ Open to the public ▸ Free registration

Financing & leasing available

Up to 100% financing, with no money down.

More items added daily

Call about selling: 1.800.221.3983

See full auction and equipment listings at rbauction.com Auction Company License #303043 *Limited-time offer from Ritchie Bros. Financial Services. OAC. Terms & conditions apply. See rbauction.com/financing

Page 38

Supply Post Western Canada Edition · supplypost.com from Australian distributor Pacific Materials Handling (PMH) has been fantastic.

“PMH has really been with us every step of the way on this. Couple this support with reduced operating costs, cheaper con-

Continued from page 36

and waterfall system, which means the wood is handled less, resulting in fewer opportunities for damage and loss of fibre,” said Hutchins.

Hine said Sennebogen parts and technical support

“From the initial phone call onwards, developing this plan alongside the Pedersen Group team has been a truly rewarding working partnership,” he said. b

sumables and parts and less in the way of service costs and we’re ahead across the board.”

Pacific Materials Handling Sennebogen Business Manager Byron Judd echoed these sentiments.

Source: AED

VancouVer TracParTs

vtp

Unit 101 - 155 Glacier St, Coquitlam, BC

Your Excavator Parts Specialists!

VANCOUVER

604-468-7828

Growing Together with our Customers!

ctp CALGARY

vtp

(587) 350-8828

ttp TORONTO

(905) 671-3939

JOHN DEERE CAT CASE KOMATSU KOBELCO HITACHI KUBOTA HYUNDAI SAMSUNG VOLVO LINKBELT DAEWOO TAKEUCHI

Rubber Tracks | Travel Device | Idler Yokes | Track Adjusters | Mufflers Swing Bearings | Final Drive Parts | Ground Engaging Tools | Pump Couplings

1-888-331-6878 | 604-468-7828 www.vancouvertracparts.com

April 2016

E2S Adds Light To Family Of Hazardous Location GRP Warning Signals E2S Warning Signals, the leading independent warning signals manufacturer, has announced the addition of visual signals to the explosion proof and corrosion resistant GNEx family.

Suitable for all Zone 1, 2, 21 & 22 hazardous location signaling applications the GNEx beacons have extended temperature range with IECEx and ATEX Ex d approvals. For high ambient light or long distance signaling the GNExB2 beacon is available in 10, 15 and 21 Joule variants producing up to 902cd - a very high output Xenon strobe.

The smaller sized GNExB1 is available for where a 5 Joule (up to 117cd) unit meets requirements. Three flash patterns and second stage, set by users, are a standard feature with all GNEx beacons, depending on base model and power (DC or AC) supply.

On-site removal and replacement of the lens filter, such as for color changes, is simple. Polycarbonate, UV stable lenses are avail-

able in Amber, Blue, Clear, Green, Magenta, Red and Yellow as separate spare parts. Installation time is minimized by design with the GRP enclosure having a threaded flame path, multiple cable entries and a large termination area.

Complementing the GNEx range is the GNExJ2 Ex d junction box, which, having multiple cable entries and terminal configurations is suitable for a large variety of applications.

Both 15 and 21 Joule versions can be supplied as a plate mounted assembly configured with up to four Xenon strobe beacons with a junction box or five beacons without a junction box.

The new Xenon strobe beacon visual signals broaden the GNEx family which includes alarm horn sounders, PA loudspeakers and manual call points for activation of fire alarms, gas detection and emergency shutdown systems. b Source: E2S

RENT OR PURCHASE - BOOK NOW! 780-463-7077 rENtaL aVaILaBLE

rENtaL aVaILaBLE

NEW TELSMITH 400 HP CONE

2015 MINYU DIESEL CONE

MANUFACTURING CONVEYORS IN LEDUC, AB

2015 - SBS 52, 400 HP CONE - IN-Out CHaSSIS - 36" fEEd 42" dISCHargE - POwEr COrdS

45” MINYu CONE - HYd adJuSt - HYd CLEarINg - Cat C9 (5,000 HrS) - 45 Kw gENEratOr - taNdEM CHaSSIS *SErVICEd - fIELd rEadY - faCtOrY warraNtY*

taKINg OrdErS ON NEw 40-60-80’S aNd StaCK PaCS....

780-463-7077

2014 TELSMITH 620 HORZ. SCREENER

SCREEN MACHINE CST CONT

NEW 2015 - POWER VAN

2014 620 trIPLE dECK HOrZ. SCrEENEr - 1200 HrS OH fEEd CrOSS CONVEYOrS - POwEr COrdS - JaCKINg LEgS. ***fIELd rEadY***

NEw 2014 POwEr VaN - 400 & 150 SOft StartS / 27 StartErS 10” CaB - SIdE dOOr - 1265L dOuBLE waLL taNK COMES wItH Or w/Out NEw CuMMINS 600 Kw gENEratOr

GRANT / SALES MANAGER

IAN / B.C.

WAYNE / ALBERTA

grant@groundw.com

ian@groundw.com

SCrEEN MaCHINE 51" traCK CONE, LargESt traCK CONE IN CLaSS rEMOtE adJuSt - dat C9 POwEr *** rENtaL aVaILaBLE ***

BOB / SASKATCHEWAN

780.887.7123 250.617.7953 780.887.1411 306.717.8450 bob@groundw.com

90 daYS - NO INtrESt - NO PaYMENtS - O.a.C Instant fInancInG (oac)

CRUSHERS

SCREENERS

Visit Our Website tO VieW Our entire equipment selectiOn

CONVEYORS

Groundworx.ca SALES

RENTALS

wE SELL wHat wE KNOw & wE KNOw wHat wE SELL©

April 2016

Supply Post Western Canada Edition 路 Our Readers Are Your Buyers

www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T. We make one of the broadest lines of construction, mining, road building, road clearing and material handling equipment in the world. LiuGong knows what

EVERY JOB. EVERYWHERE.

you need and why you need it, with unmatched value,

Surrey | 17924 56th Ave (Hwy 10), Surrey, BC V3S 1C7 Kamloops | 706 Carrier Road, Kamloops, BC V2H 1G2 Quesnel | 3650 Highway 97 N Quesnel, BC V2J 5Z1

and modern design, all backed by top-notch warranty,

1- 855-355-0109 www.douglaslakeequipment.com

training, parts and service support. Contact your local

Southern Ontario | 48 Ardelt Avenue, Kitchener, ON N2C 2C9

dealer today for more information.

Page 39

1-519-572-9447 www.fieldworksequipment.com Winnipeg | 333 Holden Street Winnipeg, MB R2J 3W3 1-204-257-4767 www.k4equipment.com

North American Headquarters | 22220 Merchants Way Suite 100, Katy, TX 77449 | 281.579.8882

Page 40

Supply Post Western Canada Edition · supplypost.com

April 2016

Larson Electronics Releases A Portable Step Down Spider Box Larson Electronics, a leading manufacturer and supplier of industrial lighting equipment, has announced the release of a weatherproof portable spider box that allows operators to plug in to 240 volt generators to operate 120 volt equipment.

The WALSB-240.50A6X120.20A-WP portable spider box from Larson Electronics is built to provide operators with a reliable source of 120 volt power when only 240 volts is readily available. A ten foot chemical and abrasion resistant cable terminated in an industrial male cord

cap carries the 240 volt current to the box, which is then stepped down to 120 volts to operate equipment. This compact spider box features six duplex 120 volt outlets that provide a sealed and secure connection for up to twelve devices. Each receptacle features a hinged watertight cover protecting the face from rain, water, and moisture when not in use.

The spider box has short circuit and overload protection, causing the unit to automatically shut down to protect it from damage if an overload occurs. The housing for this spider box is constructed from steel Source: Larson

Case IH Announces Free AFS Connect Farm Management System Case IH is pleased to announce the opportunity to experience the benefits of AFS Connect advanced farm management system free of charge. Now through the AFS Connect program, customers who purchase a new Axial-Flow combine, Steiger tractor or Magnum tractor by April 30, 2016, at participating Case IH dealerships will be eligible for a free one-year subscription to AFS Connect, including hardware installation.

“As producers take to the field this spring, we’re excited to give them the opportunity to try free AFS Connect,” said Leo Bose, Case IH Advanced Farm-

and is powder coated with a glossy blue finish for corrosion resistance and aesthetics. A convenient carrying handle is located at the top of the unit, which also doubles for cable management when not in use. This spider box is ideal for powering 120 volt equipment on construction sites, in the entertainment industry, and other job sites where 240 volt generators supply the power.

“This new compact spider box is built for portability and convenience as well as durability,” said Rob Bresnahan, CEO of Larson Electronics. “This power distribution system is constructed with a carrying handle that can be easily used as a cord wrap for storing and transporting.” b

Mobile) networks, producers gain access to 180 carriers across North America. This industryleading coverage ensures a more reliable guidance signal and sub-inch accuracy for the most precise farming practices.

• Two-way file transfer: Producers can easily transport AFS data such as yield maps, prescriptions or guidance lines wirelessly to their home office or trusted advisor.

AFS Connect offers a comprehensive suite of fleet management and machine monitoring that provide long-distance, realtime control.

The free AFS Connect program is eligible with other programs. For complete program details, visit your Case IH AFS dealer orcaseih.com/freeAFS. b

ing Systems (AFS) manager. “AFS Connect gives operators instant access to real-time data, helping them manage their entire fleet from a remote location. With instant access to location, diagnostics, fuel and engine stats, they’ll be armed with valuable decision-making tools to help increase efficiency and turn potential into profit.”

Producers who participate in the free AFS Connect program also can add one of these new features to their subscription: • Cellular Guidance (NTRIP): Tapping into CDMA (Code Division Multiple Access) and GSM (Global System for Source: Case IH

BUILDINGS FOR MINING

Attention Visitors: Save $20.00!

Pre-Register online for FREE using Promo Code: PH1011

Two Companies Joined Forces to Provide the Industry with Rugged Pre-engineered Steel Building Solutions FUTURE BUILDINGS

Arch Style or Straight Wall Serving Canada’s Mining and Energy Industries for Over 30 Years Quote Your Next Building Project

1-800-668-5111

ext www.BuildingsForMining.com 2024 mining@futurebuildings.com

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Tigercat Releases Tier 4f Equipped D-Series Harvesters New for 2016 are the H855D and LH855D harvesters equipped with the fuel-efficient Tigercat FPT N67 Tier 4f engine operating at 210 kW (282 hp) for North America and Europe.

We’re planning the next issue of

DON’T MISS OUT!

AD DEADLINE: April 22, 2016 5:00 pm

draulic system are specifically designed to achieve maximum performance and minimum fuel consumption in harvesting and processing applications. High horsepower allows the carriers to maintain hydraulic flow as the pressure increases, maintaining quick feed speeds and significantly boosting productivity.

The H855D series carriers are an excellent fit with the Tigercat 575 harvesting head.

For steep slope applications, the LH855D features Tigercat’s patented levelling system, providing exceptional stability in steep slope applications. It uses two massive hydraulic cylinders and heavy steel sections for a solution that is both simple and robust.

Due to the unique geometry of the levelling system, the machine is well balanced on slopes. In addition, the ramped undercarriage (both the front idler and the rear gearbox are set higher than the centreline of the undercarriage) allows the machines to easily drive up over rocks and stumps. b

Tigercat FPT engines offer improved reliability, lower long term maintenance costs and full support by Tigercat and the Tigercat dealer network.

Tigercat will continue to offer the H855C and LH855C for markets that do not require Tier 4 emissions compliance.

The H855D series harvesters are available with two-piece or telescopic ER boom systems. Tigercat’s patented ER boom technology allows the machine operator to extend and retract the boom on a horizontal plane smoothly and quickly using a single joystick. The stick boom or ‘reach’ joystick controls both the main and stick booms simultaneously, resulting in the attachment moving either away from or toward the operator. The main boom and tilt functions operate in the traditional manner to adjust the height and angle of the attachment.

The engine and hy- Source: Tigercat

Page 41

FINANCE AVAILABLE 2013 POWERSCREEN XR400 TRACK MOUNTED JAW CRUSHER

• 930 Hours • Independent pre-screen • Scania Tier IV engine • Efficient direct drive system • Magnet • Extended hopper • CALL • • • • • • • • •

2012 POWERSCREEN XH320SR IMPACT CRUSHER

1300 Hours Scania Tier IV Engine Magnet Belt Side Belt • Under Pan Feeder New Blow Bars Hopper Extensions 11' x 5' Double Deck Screen 2 Cross Conveyors Machine Is In Excellent Condition CALL

• Track mounted Cone Crusher • CAT ENGINE • New Cone Liners • New Vulcanized Feed Belt • Metal detection system • Feed Sensor • 5800 hrs, CALL

2008 TEREX PEGSON 1000 MAXTRAK

POWERSCREEN WARRIOR 1800

• (16’ x 5’) double deck tracked screener.

• Tough, heavy duty machine built for screening • 2 or 3 way splitting and stockpiling • 520 hrs, CALL AVAILABLE FOR RENT OR SALE 2015 POWERSCREEN CHIEFTAIN 1400

• 11’ x 5’ double deck • 3 on board stockpiling conveyors • Quick set up • 500 hrs CALL

Gear up for Construction Season!

2006 TEREX PEGSON XA400 JAW

with help from your Off-Highway Parts & Service Specialists

• • • • • •

26" x 44" Jaw Crusher With Hydraulic Adjust Cat Engine Extended Main Product Conveyor Magnet Belt Set Up In Minutes Highly Productive In Rock, Gravel And Recycle Concrete • Located In Calgary.

CALL

• Scania Tier IV

2012 POWERSCREEN 1300 MAXTRAK CONE

• 1500 Hours • Metal Detection • Excellent Condition CALL

FULL SERVICE SHOP NA

FO

TIO

NAL ORGAN

CERTIFIED CER TIFIED

QUALITY

R S TA

NDARDIZA

IZA

T

N

April 14 - 16

ER

IO

Come visit us at Truck World in Mississauga

T

1-888-246-5077

IN

#2, 7337 Pacific Circle, Mississauga

TIO

Spare and Wear Parts in stock – call for pricing!

N

Booth 1054

Delivery and In-House Financing Available

CRUSHERS

•

SCREENERS

Call: 403-988-2922

•

CONVEYORS

•

NEW & USED

Call: 780-819-7433

liam@bisoniron.com emmet@bisoniron.com WWW.GEARCENTRE-OFFHWY.COM

www.bisoniron.com

Page 42

Supply Post Western Canada Edition · supplypost.com

Insider Perspectives From AED’s Washington Office 2015 was one of the most successful years in the history of AED’s government affairs program. Members should be extremely proud of the leading role the association played in achieving several key policy victories: enacting a fully-funded, five-year highway bill, tax legislation to permanently increase Sec. 179 expensing and extend bonus depreciation and lifting the ban on crude oil exports.

AED members helped achieve those victories by hosting dozens of congressional visits to dealerships, traveling to Washington to bring the industry’s mes-

sage directly to the Hill and contributing a record amount to AED PAC. The goal for 2016 is to use that positive momentum to tackle a host of threats and opportunities. Here are some of the areas we will focus on in the year ahead: Obama administration regulatory onslaught. According to one recent media report, there are more than 4,000 new regulations on track to be finalized during the final year of the Obama administration. Many deal with workforce, labour, and environmental issues that could impact construction, mining and other devel-

GL AMOROUS?

not so much

opment activity and AED member costs of doing business. AED will be stepping up efforts at the agency level and on Capitol Hill to fight the regulatory deluge. The association is also considering pursuing regulatory initiatives related to driver hours of service in the U.S. and Canada.

Technician workforce policy. The construction equipment industry is facing a technical workforce crisis that’s undermining efficiency, driving up costs and losing distributors billions of dollars per year in market opportunity. At the 2016 Summit, AED will unveil a major study by researchers at the College of William and Mary that will quantify the problem, explain its causes and propose solutions. AED will be aggressively promoting the new study on Capitol Hill and beyond in the months ahead to build momentum

for career technical education legislation, including Perkins Act reauthorization.

Electing a pro-growth Congress. 2016 is both a presidential and congressional election year. While Republicans are likely to keep the House, the Senate and White House are up for grabs. The volatile political environment creates challenges and opportunities for AED. The association will be actively supporting pro-business candidates from both parties with an emphasis on getting early money to candidates in tough primary races. Individual dealers around the country will be involved in this effort through AED PAC and, in particular, through in-person ImPACt 2016 PAC check delivery meetings between distributors and candidates. AED will be using the elections both to educate lawmakers and further raise the industry’s visibility.

Implementing highway and tax bills. While AED scored important tax and infrastructure victories in 2015, when it comes to the highway bill and investment incentives, the job’s not done. AED will

WESTERN CANADA’S

April 2016 be working with allies and government officials to help ensure that the highway bill (and, in particular, it’s environmental streamlining provisions) are implemented as intended, that states step up to raise the necessary matching funds to take full advantage of their federal money and that Congress keeps working to identify new long-term revenue streams for the federal highway program. On the tax front, we’ll be working to aggressively promote Sec. 179 and bonus depreciation to our members and their customers. Capital investment incentives don’t incentivize activity if no one knows about them and no one understands them.

AED’s revamped depreciationbonus.org website is just the start. In the coming months, we will roll out more member tools.

Keeping momentum going to pass airport and water bills. It took years of effort by AED, our industry allies and infrastructure advocates on Capitol Hill, but lawmakers finally came together late last year to pass a well-funded, long-term highway bill. Unfortunately, other important infra-

ATTACHMENT EXPERT

structure legislation is still in limbo. Airport construction and water infrastructure legislation, in particular, are languishing. AED lobbyists will be working to revive – and hopefully grow – federal investment in these areas.

2015 may have been a productive year, but we’re not resting on our laurels and will be working to make 2016 just as successful. Do you think we’ve got our priorities and strategy right? Email aeddc@ aednet.org and let us know. b Source: AED



Watch Stokkermill Granulator Video

COOL FACTOR? of f the char ts

Working with excavators isn’t all that glamorous, but attach an HKX hydraulic kit to one and their coolness factor goes off the charts!  Standard kits for a wide variety of attachments  Latest in attachment control technology  Kits ship within 1 - 5 days—ground or air Call or Click for More Info! call +1 800.493.5487 or 360.805.8600 www.HKX.com/SPP

sales@otrx.ca | www.otrx.ca | 1-888-973-6003 55024 Range Road 234, Sturgeon County, AB (North of Edmonton)

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Caterpillar Introduces 320F L Excavators With More Efficient Hydraulics The Cat 320F excavator is designed as a “simple, reliable, durable under 50,000-pound machine for contractors looking for a general construction machine,” says Brian Stellbrink, Caterpillar excavator product application specialist.

Powered by a Cat

We’re working on our next issue!

AD DEADLINE: April 22, 22, 2016 2016 April 5:00 pm 5:00 pm

stick valves recirculate oil flow in the cylinders instead of going all the way back to the hydraulic tank, allowing more oil to flow to machine functions.

The machine’s electronic system stores flow and pressure settings for up to 20 different work tools in the cab’s LCD monitor, eliminating the need to recalibrate every time an attachment is changed.

The system can be used with one-way and twoway flow tools, in addition to tools that require a third pump and medium-pressure circuit.

A pre-start system displayed on the monitor allows you to check coolant, hydraulic oil and engine levels inside the cab. The easy-toreplace fresh air filter is located on the side of the cab. An electronic fuel priming pump eliminates the need to manually prime the pump after filter changes. Fluid taps and grease points around the machine can be accessed at ground level. b

C4.4 ACERT Tier 4 Final 161-horsepower engine, the 320F consumes 8.5 percent less fuel in standard mode than the Cat 320E it replaces, while still offering the same lifting and digging capacity.

“We expect this machine to do well in our rental fleets, and also with general contractors who do applications such as land clearing,” Stellbrink says.

The 320F has a negative flow control hydraulic system, which decreases pump flow when oil pressure increases, and vice versa.

Cat says the net result is that the pump and valve operate in harmony with less energy and less wear.

Since all major hydraulic components are positioned together on the machine, there’s less friction loss and pressure drops. In addition, special boom and Source: AED

Page 43

WE BUY

CRUSHERS & SCREENERS

We pay cash for used Powerscreen or Pegson screeners & crushers.

DO YOU HAVE SURPLUS EQUIPMENT THAT YOU ARE NOT USING AND WANT TO SELL? We prefer Powerscreen and Pegson but we will consider all brands. We are looking for equipment in good condition and are willing to pay cash, no consignment necessary. All equipment subject to inspection.

Contact Pat Lowe at

253-236-4153 or 253-209-2900

pat@powerscreen-wa.com | www.powerscreen-wa.com

INTRODUCING

WORRY-FREE MACHINE OWNERSHIP

MACHINE PROTECT

™

3 yr /5000 hr

CATERPILLAR FUEL GUARANTEE 3 YEAR VISIONLINK SUBSCRIPTION

TM

PREVENTATIVE MAINTENANCE AGREEMENT Talk to a Finning sales representative today about Machine Protect.

See your Finning sales rep for full program details and information on “VisionLink”, “Cat EMSolutions” and “Caterpillar Fuel Guarantee”. The Finning Machine Protect Program runs from January 1 to June 31, 2016. Finning Machine Protect is available on a wide selection of new Caterpillar machines only available from your local Finning dealer. Offer not valid in Saskatchewan. Finning Canada reserves the right to change, modify or cancel this program at any time.

Page 44

Supply Post Western Canada Edition · supplypost.com

New Pitbull TM 2300 Propane Screener A CostEffective And Low-Emission Alternative To Diesel Lake Erie Portable Screeners introduces a propane-powered screener as a clean and cost-effective alternative to diesel power.

The new Pitbull 2300 Propane Screening Plant is one of the first of its kind, delivering maximum efficiency and high outputs with a wide range of materials, including topsoil, mulch, gravel, stone and asphalt. The machine’s low-emission propane components provide an alternative to diesel equipment affected by the spike in prices caused by Tier 4 Final emission standards.

“While we want to offer the market a low-emission, green product that performs with power, we recognized that the Tier 4 regulations on diesel engines were driving costs up. Our team looked for another solution,” said Stuart Foradora, Lake Erie Portable Screeners factory representative. “We built the Pitbull 2300 Propane with a cleaner burning engine that comes at very minimal additional cost.

The screener has very low emissions and is still compact, portable and able to handle all the applications the Pitbull 2300 can — plus more.”

The Pitbull 2300P is almost the same machine as the Pitbull 2300, aside from the power source.

Featuring a Zenith 1.6-liter, 4-cylinder, 48-horsepower propane engine that could also be easily converted to natural gas, it can do any job its diesel-powered counterpart can. The propane also results in a cleaner engine that’s easier to maintain, allowing it to run longer with fewer repairs.

That combination makes the machine a valuable and cost-effective tool for landscapers, energy facilities, contractors, municipal

workers or as part of rental fleets. In addition, T4F diesel engines of the same size typically cost at least 30 percent more.

The extremely low emissions make the Pitbull 2300P ideal for operation in confined spaces, such as buildings and mine shafts, and eliminate the need to obtain special permits. The Pitbull 2300P also provides a significant return on investment by making it unnecessary to buy or rent expensive ventilation systems and masks that would be required to run a diesel model in a tight space. The propane engine is also quieter than most diesels.

Lake Erie Portable Screeners constructed the Pitbull 2300P to share the same features that make the Pitbull 2300 simple to use, maintain and transport. These include full hydraulic operation, tubular frame construction, a Torflex axle and a reversible shaker.

With the Pitbull 2300P’s width of 8 feet, 4-1/2 inches and either a standard pintle hitch or an optional gooseneck towing package, the machine is easy to move from site to site.

A 10K Torflex axle with oil bath hubs provides a cushioning effect so the unit tows smoothly, reducing stress to the tow vehicle. Upon arrival, users can quickly and easily lower the unit to operating position with the hydraulic system, eliminating pressure on the axle, tires or wheels during screening.

When the machine is ready to be moved, the operator can return it back to towing position with the flip of a lever. The unit also features heavy-duty suspension, electric brakes and trailer lights for safe and legal travel.

The Pitbull 2300P’s

Surrey, BC

Tel: 604-866-0482

NORSTONE EXCAVATING

20-foot-long stacking conveyor adjusts hydraulically from as low as 7 feet, 6 inches, up to 13 feet to feed material directly into a dump truck or tri-axle trailer. The height of the conveyor also allows operators to create bigger stockpiles, increasing efficiency by reducing the number of times equipment needs to be moved. These attributes, combined with the ability to place the machine at the point of excavation, minimize spillage and dramatically reduce cycle times and haulage costs often associated with loading and

unloading material when using stationary plants.

Lake Erie Portable Screeners builds Pitbull 2300P frames with highquality, structural tube steel. The tubular construction cuts down on noise and vibration, which also minimizes the risk of cracks and structural failures common in machines with C-channel construction. The screening plant is made entirely of heavy-duty materials, all the stress points are fully reinforced, and both attachment points and stress points are 100 percent welded with highstrength steel. The result is a machine with a curb weight of 13,500 pounds.

The screening plant incorporates a loading apron that accepts up to three yards of material at a time

April 2016 depending on the feed rate.

With its low dump height of 8 feet, 4-1/2 inches, operators do not need loading ramps; they can fill the hopper using typical construction equipment, such as skid steers, backhoes, loaders or excavators.

The portable screening plant also has an upper and lower screening deck, each with more than 41 square feet of screening area. The decks are each equipped with two sections of screen media. The company offers optional finger decks for the top deck in addition to a wide range of screen openings for processing all types of materials. Operators can change screens quickly and easily by loosening the tension bolts holding them in place. The screeners also can be equipped with optional

J D Neuhaus At Your Service The specialized highperformance handling products manufactured by the J D Neuhaus company are engineered for extremes, and are suitable for operation within chemical, oil and gas and general industries involving hazardous working areas including those subject to potential explosion risks. Their hoist and overhead crane mechanisms are strong, fast and silent, providing high levels of safety with ease of operation. They combine lube-free, low maintenance operation with 100% duty ratings and unlimited duty cycles.

The products are insensitive to dust, humidity and temperatures ranging from 20°C to +70°C. It is essential that the correct installation, operating and regular inspection servicing procedures are undertaken and maintained for these products to ensure long-term, troublefree operation of all mechanical and power-operated components.

To ensure that users obtain the best value for money from their investment in handling products, the JDN company can provide offsite/onsite services including supervision, instal-

lation, training, inspection, maintenance and repair, together with the supply of spares, service kits and full refurbishment facilities. All work is undertaken under full JDN personnel supervision and is carried out in co-operation with external certification authorities where required.

Appropriate products and services available from the JDN service department include: • Prior inspection for the planning of the building site • Organization of the building site and coordination with all participants • Provision of assemblyman • Commissioning • Approval of the hoists/ cranes on client terms • Approval in cooperation with external certification authority (3rd party) This is then followedup where required with regular maintenance and annual inspections by JDN trained engineers/technicians covering: • Annual maintenance under compliance with the legal requirements and the JDN maintenance plan • Introduction into the JDN maintenance data-

upper and lower discharge chutes to allow for classifying up to three different sizes of screened materials.

In addition to the adjustable stacking conveyor, the Pitbull 2300P features a hydraulically driven transfer conveyor that moves screened material from the hopper to the stacking conveyor. Hydraulic motors on the conveyors provide continuous power flow to achieve production rates up to 100 yards of clean, saleable material per hour.

The Pitbull 2300P conveyors are hydraulic rather than chain- or belt-driven like many competing models, a feature that eliminates the risk of power loss and downtime due to broken chains or belts. b Source: Iron Clad Mktg all hoists are currently required to undergo a general overhaul. For J D Neuhaus hoists, this work can be undertaken within their service centre or by one of the JDN authorized service partners.

If there is a short term demand for hoists of any capacity then a full rental service, including delivery, is available and hoists can be customized to meet specific client requirements.

The J D Neuhaus air operated handling equipment, including hoists and cranes for operations within light, medium and heavy duty engineering, cover individual lift capacities from 550lbs up to 100 metric tons. Even heavier lift requirements can also be achieved using multiple hoists and integrated synchronized lift and traverse controls for units operating in tandem or parallel configurations. Land based or offshore oil/gas platform mounting can be accommodated, including installations on sea-going vessels where ocean swell movements can be minimized by the use of rack & pinion drives incorporated into horizontal overhead beams and the mechanized trolley drives. Specialized hoists for underwater handling operations, or extreme low cryogenic conditions down to 45°C are also available, together with optional hydraulic drive mechanisms where compressed air power supplies are not readily available. b

base to ensure clients are reminded of upcoming planned maintenance • Maintenance contracts that provide precise cost control details This is also then supported with full maintenance/repair/modification facilities including: • Repair and modification in JDN’s own workshops • Repair and modification at client facilities • Conversion in co-operation with JDN R&D requirements • Overload tests A full spare parts provision incorporates support for the choice of spare parts, compilation of spare parts and service kits for retention in client warehouse and the shipping of the spare parts worldwide.

In addition, specific customer personnel training, all tailored to meet client needs is available either onsite, at customer facilities or one of the widely located JDN sales companies. J D Neuhaus are represented in more than 90 countries (including Germany, France, Great Britain, Singapore and USA), together with 70 other branches throughout the world.

After expiration of the theoretical operating life (at the latest after 10 years) Source: JD Neuhaus

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

BC Hydro And Fort St. John Reach AgreementIn-Principle On Community Measures Agreement BC Hydro and the City of Fort St. John have reached an agreement-in-principle on a Community Measures Agreement related to the construction of the Site C Clean Energy Project.

Negotiations between the City and BC Hydro have been ongoing for several years.

Under the terms of the legally binding agreement, BC Hydro commits to specific mitigation measures important to the City of Fort St. John.

Some of the features of the agreement include: • BC Hydro will provide $1 million per year to the City during construction, increased by 3.5-per cent each year.

• BC Hydro will contribute $100,000 per year for eight years to a community fund to assist nonprofit agencies in the Peace Region.

• BC Hydro will contribtrack implementation ute $250,000 to local of the agreement, and non-profits that provide provide a forum to idenemergency and transitify and resolve issues tional housing services, arising during project including the recent construction. BC Hydro $200,000 donation to and the City have also the Salvation Army’s agreed to a dispute Northern Centre of resolution process to Hope. support resolution of • BC Hydro will contribissues, if required. BC ute $75,000 this year to Hydro will provide adsupport local charities ministrative support for identified by the City. the committee.

• BC Hydro will fund one • BC Hydro and the City additional police officer will support the health to be based out of the and wellness of the projFort St. John RCMP deect workforce, through tachment, and will also BC Hydro’s annual preconduct regular trafpurchase of tickets for fic monitoring on local the use of Fort St. John roads near the project. recreation facilities to• BC Hydro and the City talling approximately will work together $423,000 over the conthrough a Site C Comstruction period. munity Agreement • Should the City decide Monitoring Committee, to expand its boundarconsisting of senior repies, BC Hydro will supresentatives from both port the application to BC Hydro and the City. include the 96 hectares The committee will of land at 85th Avenue.

• BC Hydro will maintain a Community Consultation Office as a means of providing information to the public and stakeholders regarding procurement, employment and construction activities.

• BC Hydro and the City will coordinate regular monitoring of the City drinking water source quality and quantity at BC Hydro’s expense.

• The City has confirmed its ability to access its rights to water from the reservoir as a potential future source of domestic water, if needed, and at no charge from BC Hydro.

The City of Fort St. John has begun discussions with citizens to inform them about this agreement-in-principle prior to signing on their behalf.

Quotes: “This agreement is a direct result of our residents taking a pragmatic approach, regardless of their personal feelings, to join in on a conversation about how they felt the community would be impacted. The features of the agreement are based

Page 45

on those discussions, your concerns and your hopes. So now we bring this agreement to you and close the loop.” — Lori Ackerman, Mayor, City of Fort St. John “BC Hydro appreciates the opportunity to work together with the City of Fort St. John to ensure a collaborative approach to mitigating impacts of the project and ensuring meaningful opportunities that benefit the residents of Fort St. John.” — Jessica McDonald, President and CEO, BC Hydro

“I’m pleased with the outcome of the discussions between BC Hydro and the City of Fort St. John. Both parties have worked hard to reach an agreement.” — Pat Pimm, MLA, Peace River North “We look forward to working closely with local and First Nations communities to maximize the economic opportunity for families in the Peace Region and BC.” — Rick Quigley, Peace River Hydro Partners. b Source: BC Hydro

20% OFF LABOUR

INTERIOR DIESEL LTD. HEAVY EQUIPMENT PARTS & REPAIRS FULL REPAIR FACILITY-FIELD SERVICE Labour Special, 20% Off All Shop Labour For Break Up. Give Us A Call For Labour Quotes On All HD Equipment Parts And Repairs.

PM And Field Service Work Also Available!

Call today!

250.374.3443

2045 W Trans Canada Hwy, Kamloops, BC, V1S 1A7

QUALITY NEW & USED EQUIPMENT FOR SALE FOR SALE OR RENT

NEW JCI K300+ Cone In & Out Plant. Kodiak 300+ Cone, 42” rear feed/42” rear discharge, Designed to fit most CC plants. $565,000

Sandvik QS331 Cone Plant. CS430 Cone, C9.9 Cat Powerpack, Excellent reduction capabilities. For Sale or Rent

NEW KPI 33-36150 SuperStacker. Automated telescoping radial stacker, 36” wide belt, 150’ length, up to 1,000 tph. For Sale or Rent.

1998 GOMACO Commander III. 8125 Hours, Fully serviced, c/w 42” Trimmer and C&G mold to 36”, sensors and arms. $65,000

KPI 52S Portable 4X8 Pugmill. For sale or rent, two to choose from. Please contact us for more details!

NEW GOMACO Curb Cadet. New, ready to work. Yanmar 31 HP Diesel, Three Tracks, Great for pin-on curb! $102,880

SALES CONTACTS: Hugh Porter 604-657-7167 hugh@lonetrack.ca

William Thompson 780-474-8082 Willie@chieftainequipment.com

Page 46

Supply Post Western Canada Edition · supplypost.com

‘4Site’ – TWS With You Every Step Of The Way ‘4Site’ is a new project management service introduced by Terex Washing Systems (TWS) to specifically aid customers and distributors with the installation of TWS equipment, providing three tailored packages to choose from, Silver, Gold or Platinum. ‘4Site’ comprehensive management service provides enhanced reliable

and efficient levels of support every step of the TWS installation. Each of the project management packages include 4 key steps and are supported by TWS at an international level through regional partners from its headquarters in Northern Ireland.

The announcement of ‘4Site’ was made during TWS global distributor

forum event which was extremely well received by the network who regards it as an essential additional service to further complement TWS’s product range.

Austin Carey, Managing Director, Blue Machinery (Scotland) Ltd commented “The introduction of this new project management service is a very positive approach by TWS which can only help strengthen the brand’s position in the global marketplace, furthermore we are delighted as a distributor to be able to offer such a

Accurate is

FORESTRY ALL MAKES AND MODELS

Call For Your Forestry Attachments & Guarding Log Grapples

Chip Buckets

Ask Your Dealer for Accurate Attachments

ACCURATE

Fabricating Ltd.

Phone: 604-591-6184

www.accuratefabricating.com

comprehensive management service providing a turnkey solution to our customers.”

Sean Loughran, Director TWS commented “The response to the introduction of ‘4Site’ from our global distributor network has been incredible and distributors are excited about offering the service to their customers. TWS is the premier provider of advanced plant solutions and the introduction of ‘4Site’ project management service greatly enhances our position in the marketplace to better serve our customers. Furthermore our new multimillion pound facility at our dedicated TWS headquarters site puts us in a very strong position moving forward into 2016 and beyond.”

The Complete Project Management Service ‘4Site’ is led by Garry Stewart, Project Manager TWS, whom has 20 years’ experience in the industry. The new project management service ‘4Site’ is responding to business growth and increased customer demand and will aim to serve key markets globally. The project will be led by Project Manager who will work closely with TWS distributors, service providers and internal teams to fulfill TWS commitment to provide expertise, project management and technical and service support globally.

Commenting on the new project management service, Garry Stewart, TWS project Manager, stated “We believe that rapid response, qualified and effective support is crucial in meeting endusers needs, letting distributors deliver on their

Ramsey Company InC. Office: (360) 748-8918 | Jim Ramsey (360) 269-3437 | Jack Ramsey (360) 269-0902

April 2016 promises as well as developing long term customer relationships, which is exactly what ‘4Site’ will offer”.

Gerhard Kronlacher, Field Service/Sales, TWS distributor in Austria added “I certainly will be availing of the project management services offered through ‘4Site’ on and forthcoming installations going forward. This service truly brings together an experienced installation team who are working with this equipment on a daily basis which can only strengthen the already good service offered by TWS and Kuhn, Austria.”

The Right Package to Deliver Your Promise TWS offer 3 tailored service management packages, Silver, Gold and Platinum, with a common theme centered on effective and efficient communication throughout the process. The silver package is complementary with all TWS machines and ensures simplification of the installation and commissioning of TWS washplants globally.

The ‘4Site’ Gold package provides an experienced TWS Site Engineer who will work closely with the distributors/customer’s team to assist and/or su-

pervise the complete installation of TWS plant. In addition this package offers on site plant commissioning and training relative to the TWS equipment being installed.

The Platinum package consists of a complete turnkey service delivered by the TWS team to include total planning and management of all aspects associated with the entire installation and commissioning of the TWS supplied plant and this is undertaken by a dedicated team of TWS engineers.

John Bracken, General Operations Manager, Duo Plc, TWS distributor in England and Wales, UK added “ ‘4Site’ will be something we as a company will certainly be using, we regularly have numerous installations happening simultaneously and the various services packages offered through this new project management service can only enhance our offering and service to our customers.”

Enrico Kallmyer, Sales Manager West-Germany, Christophel, TWS Distributor in Germany echoed these comments and added “ ‘4Site’ project is another display of vision from the dynamic team at TWS. Continued on page 47

Don’t For get!

The Next Ad Deadl ine is April 22, 2016 5:00 pm

The fineST BuckeTS, SySTeMS, TRaininG anD DeSiGn!

Reach out over 1,500' | Dig to 120' or more!

Turnkey systems from 4 - 15 cubic yards!

Sand, Gravel, Mud & Slurry - We can dig it!

vIsIt us onlIne: www.RamseyCoInC.Com

April 2016 Continued from page 46

TWS continue to push boundaries; their enthusiasm is relentless as is their desire to succeed. I look forward to using this new project management service on future installations in Germany.”

Speaking after the announcement Garry Stewart, TWS project Manager, commented “We are very

Supply Post Western Canada Edition · Our Readers Are Your Buyers encouraged by the very positive response from our Distributor network for TWS ‘4Site’ Project Management Packages.

Our distributors are very keen to use this new service and to date we are currently working on a number of installations in the UK, Europe and the USA. The TWS team is dedicated to providing a

cost effective and timely service to our distributor network. The modular concept of our wash plants coupled with the pre-plumbed & pre-wired features have been designed for rapid deployment, which are features we plan to fully capitalize on with TWS ‘4Site’”. b

Page 47

QUALITY SQUEEZED INTO EVERY SEAT!

Source: Terex

call 800-268-9525 | d.martin@kinshofer.com

DARBY MANUFACTURING

YOUR INDUSTRIAL SEATING SPECIALISTS.

www.kinshofer.com

www.liugongna.com T O U G H W O R L D . T O U G H E Q U I P M E N T.

LiuGong wheel loaders aren’t complicated, so every operator, everywhere, can be very productive from the very first day. This means more projects and more profits for you.

Contact your local dealer, Wajax Equipment to learn more about what LiuGong Wheel Loaders can do for you and your business.

3171 KINGSWAY | SUDBURY ON | P3B 2G5 T: 705-560-9421 | F: 705-560-4663 WWW.DARBYMANUFACTURING.COM

ENGINEERED SO YOU’RE IN CONTROL. Blackfalds | Calgary | Clairmont (Grande Prairie) Edmonton (HQ) | Fort MacKay | Fort McMurray 1-877-469-2529 www.wajaxequipment.com

Page 48

Supply Post Western Canada Edition · supplypost.com

April 2016

2012 CASE TR320

2011 DYNAPAC CA262PD

2009 CASE 1650L

2014 CASE 850M

PRICE $45,000 OPTIONS: E/ 1144 HRS, CAB, HEATER, AIR CONDITIONING, STEREO/RADIO, AIR SUSPENSION SEAT, FOOT THROTTLE, MECH/SERVO CONTROLS

PRICE $79,500 OPTIONS: E/ 975 HRS, COMFORT CAB, AIR CONDITIONING

$115,000 $125,900 PRICE OPTIONS: E/ 2497 HRS, CAB, HEATER, AIR CONDITIONING, CLOTH SEAT, AIR SUSPENSION SEAT, REAR CAB SCREEN, REAR WIPER, P.A.T. BLADE

OPTIONS: E/ 497 HRS, CAB, HEATER, AIR CONDITIONING, REAR CAB SCREEN, P.A.T. BLADE, 28” TRACKS, BLOCK HEATER, POSITIVE AIR SHUTOFF

EDMONTON

Stk#099507

G.PRAIRIE

Stk#104730

LETHBRIDGE

Stk#084265

PRICE

$180,000

EDMONTON

Stk#097883

2011 CASE CX135

2006 KOBELCO 135SR

2007 HITACHI ZX350LC

2014 CASE CX145C

PRICE $48,500 OPTIONS: E/ 15871 HRS, 54” CLEANUP BUCKET, 24” TRACKS, BLOCK HEATER, POSITIVE AIR SHUTOFF, CTRL PATT SELECTOR, 9’4” ARM

PRICE $69,900 OPTIONS: E/ 5196 HRS, MINIMUM SWING RADIUS, MANUAL COUPLER, 30” DIG BUCKET, 54” CLEANUP BUCKET

PRICE $99,900 $104,500 OPTIONS: E/ 9610 HRS, MANUAL COUPLER, DIG BUCKET, PLUMBED FOR TWIST, NEW UNDERCARRIAGE

PRICE $157,500 OPTIONS: E/ 1398 HRS, 36” DIG BUCKET, 54” CLEANUP BUCKET, 24” TRACKS, BLOCK HEATER, POSITIVE AIR SHUTOFF, CTRL PATT SELECTOR

EDMONTON

Stk#100197

RED DEER

Stk#089615

Stk#086691

TABER

EDMONTON

Stk#100198

2012 CASE CX350C

2011 CASE SR200

2005 DITCH WITCH JT4020

2010 CASE 721E

PRICE $165,000 OPTIONS: E/ 5492 HRS, DOUBLE ACT AUX HYD, MANUAL COUPLER, CTRL PATT SELECTOR, TWIST BUCKET, 10’ 8” ARM

PRICE $35,000 OPTIONS: E/ 1041 HRS, 2 SPEED MECH CONTROL

PRICE $79,900 OPTIONS: E/ 4500 HRS, MACH 1, CAB W/ HEAT & AC

PRICE $125,000 $130,000 OPTIONS: E/ 3500 HRS, NO ATTACHMENTS

LETHBRIDGE

Stk#098977

LETHBRIDGE

2012 CASE 721F

PRICE $135,000 OPTIONS: E/ 4509 HRS, 3.5 YD BUCKET, FEEDLOT BKT W/ GRAPP

TABER

Stk#096951

Stk#097605

2012 CASE 1221E

PRICE

$169,000

OPTIONS: E/ 5015 HRS, CAB, HEATER, AIR CONDITIONING, STEREO/RADIO, CLOTH SEAT, AIR SUSPENSION SEAT, RH BRAKE PEDAL, STANDARD REACH ARMS EDMONTON

Stk#099720

MORE UNITS, MORE PICTURES, MORE INFO AT

ROCKYMTN.COM

LETHBRIDGE

Stk#066803

2008 CASE 1221E

$130,000 $175,000 PRICE OPTIONS: E/ 4535 HRS, CAB, HEATER, AIR CONDITIONING, AIR SUSPENSION SEAT, TEETH & SEGMENTS, 7.25 YD BUCKET, 29.5R25 RADIAL LETHBRIDGE

RED DEER T 403.341.4832 TABER T 403.223.2333

Stk#063329

EDMONTON T 780.486.2273 GRANDE PRAIRIE T 780.882.7637

TABER

Stk#096950

2012 KAWASAKI 115ZV-2

PRICE

$270,000

OPTIONS: E/ 6385 HRS, CAB, HEATER, AIR CONDITIONING, RIDE CONTROL, HEAVY COUNTERWEIGHT, REAR VIEW CAMERA, 8.3 YD BUCKET W/ TEETH & SEGMENTS EDMONTON

MEDICINE HAT T 403.528.3838 CALGARY T 403.243.8600

Stk#099729

LETHBRIDGE T 403.327.3154 EDMONTON METSO T 780.486.6013

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 49

EDMONTON METSO 17720 -105 12720 149AVE. ST N.W.

1-844-77-METSO

STK# 018459Q NEW FABTEC 30X50 CONVEYOR 350 fpm belt speed, up to 600 tph, work ready, available for rent

STK# 060207 USED MASABA 36X125 RADIAL STACKER switch gear, power travel, hydraulic axle jacks, hydraulic axle extend, work ready, available for rent

$33,000 CALGARY

EDMONTON METSO

STK# 078882 USED MASABA 36X100 RADIAL STACKER self-contained, optional blending bin, hydraulic lift and drive, single fold, Caterpillar C4.4 97hp engine

$145,000 CALGARY

$177,000

LD

SO

STK# 019371Q NEW FABTEC WASH PLANT Metso FS303 6x20 triple deck, Eagle 44x32 double screw, three axle carrier, 14 bar wash system, airlined discharge chute, under-screen hopper

STK# 068415 NEW METSO 6X20 SCREEN PLANT Metso FS303 6x20 three deck screener, feeder screen plant, 8x13 hopper, tandem walking beam, HD suspension 16 wheel, brake & light package

$300,500 CALGARY

CALGARY

$370,000 EDMONTON METSO

STK# 085174 USED METSO HP300 IOC PLANT refurbished 2001 Metso HP300 cone, in and out setup, switch gear included, tri-axle suspension, Fabtec chassis

STK# 083259 NEW METSO HP300 IOC PLANT Metso HP300 cone crusher, in and out configuration, 36” feed and 42” discharge, hydraulic levelling jacks, HD three axle suspension

$440,000 EDMONTON METSO

EDMONTON METSO

D

$370,000

STK# 083886 NEW METSO C106 JAW PLANT Metso C106 28x42 jaw crusher, Metso FS302 6x20 double deck scalper screen, tri-axle 24 wheel suspension, 13’ discharge height, 42” discharge conveyor

$640,000 EDMONTON METSO

$750,000

D

L SO

L SO STK# 083260

NEW METSO HP400 IOC PLANT Metso HP400 cone crusher, in and out configuration, tandem 16 wheel walking beam, 36” feed and 42” discharge, hydraulic lifting jacks

STK# 057040 NEW METSO HP500 IOC PLANT Metso HP500 cone crusher, Tri-trunion axle, 48” discharge, 42” feed conveyor, in & out setup, HD tandem walking beam w/ booster axle suspension

$760,000 CALGARY

EDMONTON METSO

STK# 068416 NEW METSO 7X20 SCREEN PLANT Metso FS353 screener triple deck horizontal screener, overhead feed conveyor, three cross conveyors, tri-axle chassis

MASABA 42X225 PORTABLE CONVEYOR Two 70ft slides, 225 foot continuous belt.

$916,000 EDMONTON METSO

NEW METSO LOKOTRACK LT300HP CONE CRUSHER

EDMONTON METSO

STK#

$CALL

086015

E/ 38 HRS, Metso HP300 track-mounted cone crusher, 10 cu yd feed hopper, standard medium liner, engine pre-heater, interlocking cable, Caterpillar tier 3 C15 engine.

METSOPARTS@ROCKYMTN.COM

CHEE CHIK

METSOSALES@ROCKYMTN.COM

780-222-3590

METSOSERVICE@ROCKYMTN.COM

BRIAN JERRED

403-826-1759

Page 50

Supply Post Western Canada Edition · supplypost.com

Strong Lift Chart Saves Anthony Crane’s Client Money Companies working on new construction projects often have several crane model options when it comes to a lifting project. Spaces tend to be less congested, allowing larger cranes to be easily maneuvered into location and quickly repositioned around the site to pick and place materials. A variety of options – swing-away and luffing jibs, full counterweights and boom inserts – can be added to the crane with relative ease to meet configuration requirements.

It’s during maintenance lifts on existing structures in congested downtown settings in major metropolitan areas when crane options narrow and the expertise and deep equipment fleet of a lifting company pays dividends. Add to the mix the challenge of not being able to lift over areas occupied by recovering patients, and you have the recent project successfully and efficiently completed by the Dravosburg, PA, branch of Anthony Crane USA by using its new Terex® AC 250-1 all

If we can’t get it, you don’t need it!

• We Now Have A Track Machine For Your U/C Swaps • Volvo Parts Now Available • New & Used Parts For All Makes & Models • Rebuilt Components Available

FOR SALE: • PIPER CHEROKEE 6 CALL FOR DETAILS New Engine/Propellor • 12 ft. DA Hydraulic Snow Blade

• 966D-E-F Quick Coupler • Good running Take out Cat 3406 • Package of 29.5R25 Radial Tires • Wrecking CAT 740

EQUIPMENT DISPERSAL: • BOMAG BW210D • BOBCAT 334 MINI HOE • KOMATSU PC300HD5

• INTERNATIONAL SNOW PLOW TRUCK • BOBCAT 864 TRACKED SKIDSTEER

Kamloops, BC., CALL GRAHAM: 250-851-1100 | 250-573-4181 (Office/Fax) | bgparts@telus.net

terrain crane.

Paging Dr. Anthony Anthony Crane was brought in to support Pittsburgh’s power and industrial contractor, McKamish Inc., to remove old HVAC units from the rooftop of the Allegheny General Hospital. “The building was 157-ft (47.9-m) tall, and we had to reach 40 ft (12.2-m) over the rooftop,” mentions Ron Shearer, Account Manager/Crane Specialist at Anthony Crane.

“There were a number of picks to be made, of which the heaviest weighed approximately 15,000 lb (6.8 tonnes).”

Typically Anthony Crane would enlist a high capacity all terrain crane with a luffing jib and full counterweight due to the height of the building and the radius required to perform the lifts. However, this was neither a typical job nor typical circumstances. Work area confinements did not allow the assembly of the luffing jib for the crane, so only the main boom could be used. “The crane had to be set up in a loading zone to eliminate lifting over the occupied portions of the

hospital,” explains Andrew Longacre, GSP, of Anthony Crane. “The work area was extremely small and there was a sky bridge we had to work around that did not allow assembly of inserts or luffing jib.”

The crane was required to work at a radius that would allow the boom to raise straight up and over the building without hitting the skybridge to make the HVAC equipment lifts and load the old pieces onto trucks. “The only way to accomplish the lift was to use a crane that gave us a powerful main boom and capacity with just the main stack of counterweights, so it could fit in an area with minimal swing room,” adds Shearer. In his mind there was only one crane model that would fit the bill.

Terex AC 250-1 the Right Prescription Recently added to Anthony Cane’s fleet, the Terex AC 250-1 all terrain crane gave them the combination of power, main boom length and compact carrier size to efficiently handle the picks at Allegheny General Hospital. “The AC 250-1 crane is one of the most compact six-axle cranes on the market and offers the most compact outrigger base and tail radius work area in its class,” says David Naab, Regional Business Manager for Terex Cranes. “Yet it has a 262-ft (80-m) main boom, which is exactly what An-

Shorten Your Troubleshooting Cycles & Increase Machine Availability

16 years of experience Excellent presentation and equipment. The instructor had excellent communication and preparation. This course is well worth it; I would like to do it again.

FRANK N. - B.C. HYDRO

Hands-On on Your Machines

Hydraulics Troubleshooting Training

Hands-on & Interactive at Your Shop

CD Industrial Group Inc. | www.cdiginc.com | info@cdiginc.com | 1·866·628·3224

April 2016

thony Crane needed for this project.”

Because Shearer had the new 300-US-ton (250-tonne) capacity class crane at his disposal, this eliminated the additional time and expense of supporting equipment for a larger crane. Crew members did not need an assist crane to assemble and disassemble a luffing jib on site or the extra truck loads for jib transport. Additionally the extra manpower requirement for assembly/disassembly of the jib wasn’t needed. “By using the AC 250-1 crane with only the main boom, we easily saved more than $12,000 compared to using a crane with a jib.”

The strength of this Terex crane’s load chart also saved on the counterweight configuration for this project. The height of the building required the AC 250-1 crane’s center pin to be 60 ft (18.3 m) off of the building. The operator used the full 262.5 ft (80 m) of main boom to reach the 40 ft (12.2 m) onto the building’s roof to hoist the HVAC units and components away. This required an operating radius of more than 100 ft (30.5 m).

Knowing the heaviest piece to be lifted weighed 15,000 lb (6,8 tonnes), Shearer prepared the amount of counterweight required for all the lifts.

According to Naab, “The AC 250-1 crane offers a 16,200-lb (7.3-tonne) rated capacity when working at a 120-ft (36.6-m) radius with only 115,300 lb (52.3

tonnes) of counterweight.”

Shearer adds, “This allowed us to use only the main stack and not the winged weights to reduce the required swing room.

Additionally, it saved us 4 loads and approximately $4000 in shipping costs to and from the site.”

Only the Terex AC 2501 crane and 4 truckloads of counterweight and supporting equipment made the short 13-mi (20.2-km) trip from its Dravosburg yard to the hospital’s downtown Pittsburgh location. Once on site, the operator took advantage of the crane’s allwheel steering to maneuver it into the cramped loading zone staging area. “The crane offers several steering options, including off-wall, all-wheel and crab to efficiently maneuver into tight spaces,” offers Naab.

Continued on page 51

We’re planning the next issue of AD DEADLINE: April 22, 2016 5:00 pm

DON’T MISS OUT!

Continued from page 50

In less than two hours the crane was rigged and ready for the lifts. In a matter of a few hours, the HVAC units and supporting components were picked from the roof and placed

Supply Post Western Canada Edition · Our Readers Are Your Buyers onto trucks for transport.

“We had to carefully lift the units over the sky bridge to set the old units on the trucks,” adds Longacre.

While the weight and size of the pieces posed little challenge for Antho-

ny Crane, the location of the lift certainly did. Having the combination of compact size, long boom and strong load chart of the Terex AC 250-1 crane helped the company to safely, efficiently and cost-

Regal “Rocks” At AGG1 With New Modular Pump Drive Patented pump drive adapts to almost any pump or drive with modular components.

Shaker-screen bearings, paver bearings and adaptable high-torque reducers shown in cutaway.

Regal Power Transmission Solutions introduces its new Durst modular hydraulic pump drive in booth 1230 at Agg1, along with exhibits and demonstrations of Rollway shaker screen and Sealmaster® bearings, as well as gritduty gear reducers from Browning, Hub City, and Foote-Jones. The booth will feature an operating gear drive submerged in sand to demonstrate Regal equipment durability, as well as the capabilities of the company’s wireless machinery health-monitoring system.

Visitors can also use an “Interactive Plant” touchscreen to pull up details on Regal product solutions shown in aggregate and paving operations.

Patented pump drive with one to eight pump connections Durst’s new hydraulic pump drive uses a patented modular design featuring pump pads and spline adapters that allow rapid build of units to fit almost any input shaft or SAE pump connection. Clever engineering allows a single gear case to fit different bell housings on the driven side. Engineered with modular internal gears and exceptional parts consolidation, the pump’s design enables rapid assembly and shipment from build centers throughout the U.S. The compact unit begins with a cast iron housing, AGMA Class 10 spur gearing, heavy duty ball bearings and a one-piece gear and shaft design for long, rugged service. The pump’s patented pad design ensures a continuous

flow of oil through the bearing to provide constant wet-spline operation even at startup.

Durst, along with Hub City and Foote-Jones, is also structured for rapid development of “one off” modified-standard units and invites inquiries for non-cataloged drives, as well as full custom units.

Quick-delivery shaftmount and concentric reducers Hub City’s PowerTorque shaft-mount reducers will be displayed in cutaway to highlight the carburized and ground, AGMA-11 gears that provide exceptionally high torque density in a compact package, with up to 98.5 percent efficiency per stage. These versatile units are ideal value-priced dropin replacements for applications such as bucket elevators and bulk conveyors. A wide range of accessories includes conversion kits for screw conveyor applications.

Warranted for 18 months, they feature metal-reinforced double-lip seals riding on precisionground shafts to deliver long service life. Ready for off-the-shelf delivery, PowerTorque reducers are available in 10 sizes up to 200 hp rating, with output speeds to 200 rpm.

48-hour shipment is available on the most popular sizes and ratios of Foote-Jones Line-O-Power helical concentric-shaft reducers. A cutaway display at AGG1 highlights the rugged housings, highcapacity bearings, ground/ skived gears and large diameter shafts. Double-, triple- and quadruple-reduction units are available in ten sizes up to 1550 hp input and 429,300 in-lb output. Surface-hardened helical gearing is rated to AGMA standards, and tapered roller bearings on all

shafts provide anticipated bearing life in excess of AGMA standards. Models available in the Fast-Foote 48-hour delivery program include double and triple reduction units rated for up to 200 hp continuous input.

Browning’s multi-patented TorqTaper Plus helical shaft-mount reducers allow easy installation from front or rear for compact installations with short shaft lengths. A patented threelayer barrier seal is key to the reducer’s industry leading three-year warranty.

Available for up to 500 hp input, the TorqTaper reducer features carburized, ground AGMA-12 gearing and tapered roller bearings on all shafts, providing high torque densities that allow downsizing in many applications. Larger diameter shafts also allow high overhung loads.

Grit-duty bearings for shaker screens, paving equipment and other harsh duty Regal’s Rollway business will display its spherical roller bearing for shaker screen applications at AGG1. These units are specially designed for high performance and long life in screening equipment to compensate for the high temperatures and thermal differentials created by the application’s high speeds, accelerations and eccentric loads. Radial clearances are increased to between C3 and C4, with reduced tolerances for the bore, outside diameter and internal clearance. A high-quality alternative to more costly products, Rollway shaker screen bearings meet industry standards with a robust design that starts with 100-percent forged rings and superfinished races for long life in adverse, marginal-lubrication conditions. The thick-section,

effectively handle the job.

“Where other models would’ve required inserts and/or a swing away jib, we were able to complete this job with only the main boom of the AC 250-1 crane,” mentions Mr. Ray two-piece brass cage is centrifugally cast and machined, guided on the outer race for precision and stability during harsh use.

Sealmaster Paver Bearings will demonstrate why they are industry standard for OEM builders of asphalt equipment.

Engineered with various combinations of front and rear double-lip contact seals that withstand temperatures up to 400°F, Sealmaster Paver bearings can further protect interior components with optional front and rear rotating seals, as well as optional shields. The high-temperature components and three layers of protection enable the bearings to effectively shield the interior components and resist the heat and erosion of asphalt.

Ductile or cast iron housings are available in eight mounting configurations.

The wide inner race pro-

Page 51

G. Anthony, President & CEO. “This was the best option both operationally and economically for us and the customer. We also sincerely appreciated the full support of the Terex sales and maintenance teams, as

they spent countless hours with our operator and technicians to review every part of the crane and were present for the first series of jobs.” b Source: Terex

ROTARY DRILL FOR SALE

2002 Foremost Dual Rotary DR12 Drill c/w 2002 Sterling L9500 Quadra axles.

Located in Montreal Please inquire to: sgg@sguygauthier.com

Continued on page 53

STATIC VIBRATORY UP TO

72” DEPTH

BRON Add-On Utility Plows are the most cost-effective method for installation of fiber optic, copper cable, conduit and pipe. Available as static or vibratory, there is a BRON Add-On Utility Plow that’s right for you.

Call today for a dealer near you!

1.800.263.1060

www.rwfbron.com

BRON is a registered trade mark of RWF Industries a division of Roberts Welding & Fabricating Ltd.

EECI 15017 S04

April 2016

Page 52

Supply Post Western Canada Edition · supplypost.com

April 2016

Women in trades. Programs like the Women in Trades Training initiative provide women with the support and resources they need to be successful if they choose to pursue a career in the trades. http://ow.ly/ZmByd Industry Training Authority WorkBC Women in Trades Training (WITT).

Front Page Story

Women In Trades BC Government announces support for women to start a career in the trades.

T

he Government of British Columbia announced $1.8 million today for the Women in Trades Training (WITT) initiative through the Industry Training Authority (ITA) to help support women to get the skills and training they need to start a career in the trades.

While there are more and more women pursuing trades careers in British Columbia, the percentage of male journeymen is still significantly higher than females. With the addition of nearly one million job openings expected in the province by 2024, women will play an increasingly important role in keeping B.C.’s economy diverse, strong and growing.

“If we want a strong and vibrant economic future, then it is key that strong and vibrant women help drive it,” Premier Christy Clark said. “A great opportunity

for women to help drive the economy is through careers in the skilled trades.

And the Women in Trades Training initiative will help give women the support and training they need to succeed.”

Through the Women in Trades Training Initiative, the Industry Training Authority has contracted Camosun College, Okanagan College, Thompson Rivers University and Tradeworks Training Society to deliver programs specifically designed to help women kick-start their trades career. These programs provide women with introductory trades training, technical training, an overview of various trade occupations, as well as job-placement support.

These four WITT programs are currently open to applications and will benefit up to 234 female par-

ticipants when the training concludes in September 2016.

Funding for the Women in Trades Training Initiative is provided through the Canada-British Columbia Job Fund Agreement under the Employment Services and Supports (ESS) stream.

Through the Canada Job Fund, the Government of Canada provides British Columbia with a total of $65 million per year to deliver targeted training programs. The ESS stream is designed to assist British Columbians who are facing barriers in the labour market to develop essential job-readiness skills.

Quotes: “It’s terrific that B.C. and us can work together to help women in trades get the education, skills and training supports they need. We will continue to work with the B.C. govern-

ment and others to help all Canadians get the skills they need for good quality jobs.” — MaryAnn Mihychuck, federal Minister of Employment, Workforce Development and Labour.

“There has never been a better time for women to consider a career in the trades. We are facing incredible economic opportunities and preparing for unprecedented demand for skilled labour over the next decade. Programs like the Women in Trades Training initiative provide women with the support and resources they need to be successful if they choose to pursue a career in the trades.” — Shirley Bond, Minister of Jobs, Tourism and Skills Training “There is growing interest in trade careers amongst women in B.C. and the Industry Training Authority is focussed on ensuring that the right resources and tools are in place to foster their curiosities into action.

“ITA, in collaboration with the government, supports various aspects of the apprenticeship journey, including trades exploration, technical foundation training, resume building, job search and matching, and potential financial support for daycare, tool purchase, and transportation, through the Women in Trades Training funding model. With more women

registering to become certified electricians, welders, and carpenters than ever before, the Province is on track to building a diverse, strong, and sustainable trade industry.” — Gary Herman, CEO, Industry Training Authority.

Quick Facts: • The ITA’s Women in Trades Training (WITT) initiative connects women with funded training opportunities throughout British Columbia, matching the skills of newly trained women with the increasing needs of B.C.’s labour market.

• Since 2008-09, the WITT program has served more than 3,000 women.

• There are approximately 4,200 registered women apprentices in the province across 72 different trades.

• The percentage of women who are registered

apprentices in B.C. is at 10.4%, up from 8.5% in 2009.

• B.C. will have nearly one million job openings by 2024, due to retirements and economic growth.

• Almost eight out of 10 of these job openings will require post-secondary education or trades training.

Learn More: Industry Training Authority Women in Trades Training Initiative: http:// www.itabc.ca/womentrades/overview WorkBC resources for women: https://www. workbc.ca/Resources-for/ Women/Women.aspx B.C.’s Skills for Jobs Blueprint: https://www. workbc.ca/TrainingEducation/B-C-s-Skillsfor-Jobs-Blueprint/Learnabout-Blueprint.aspx. b Source: BC Gov't

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Continued from page 51

motes stability on the shaft and the wide outer ring provides improved misalignment capability within the housing. A unique land riding brass retainer minimizes wear on both ball and retainer, while maximizing stability. Sealmaster Paver Bearings are factory replacement for the most common brands of asphalt handling machinery.

Sealmaster Mounted Gold ball bearings, USRB mounted spherical roller and RPB mounted tapered

roller bearings are engineered with unique and patented features for superior sealing to retain grease and exclude contaminants in harsh environments. The Gold Line of mounted ball bearings utilize the industry’s widest outer race and a heavy duty labyrinth seal, allowing for the unique land riding ball retainer and space for the dimple and lock pin to stabilize the insert. This maintains a direct line of lubrication into the bearing cavity. The locking pin and

dimple system prevents outer race rotation and allows a full ± 2 degrees misalignment.

Sealmaster USRB performance mounted spherical roller bearings feature black oxide treated bearing steel races with optimized geometry for load capacity, misalignment and speed capabilities. The USRB is available in both setscrew locking and adapter mounting system. The felt seal with flinger provides a good balance between contaminant entry, grease

5,000 People Attend Site C Job Fairs

BC Hydro and its contractors have completed the latest round of Site C job fairs and business networking sessions in northern B.C. More than 5,000 job seekers and over 700 businesses attended the events in Chetwynd, Dawson Creek, Fort Nelson, Fort St. John, Mackenzie, Prince George, Quesnel and Tumbler Ridge.

“The construction of

Site C is providing an important opportunity for British Columbians to find work and business opportunities, particularly during some difficult times in the natural resource sector,” said Bill Bennett, Minister of Energy and Mines.

“Our government believes in Site C; as our population and economy continue to grow, Site C will bring guaranteed long-term clean

HEAVY DUTY STEEL WORKBENCHES Built To Last!

■ ■ ■ ■ ■

2' Storage Professional Grade Unit Roller Bearing Drawer Guides 1 ⁄8” Steel Top, 16 Gauge Drawers Custom Designs, Any Length, Any Colour Bolt Storage, Welding Tables, Roller Benches 10' Stationary Bench

Made in Canada

ORDER TODAY!

www.diamondindustries.ca ■ 1-866-351-2471

energy to meet increasing demands while providing much needed jobs.”

BC Hydro was joined at the job fairs and business sessions by some of the contractors working on the Site C project, including Peace River Hydro Partners (main civil works), ATCO Two Rivers Lodging (construction and operation of Site C worker lodge), along with companies providing site preparation and security services.

“The purpose of the job fairs and business sessions is to facilitate local employment and contract opportunities on Site C construction,” said Jessica McDonald, President and CEO of BC Hydro. “We want to make sure that local and Aboriginal businesses and workers have every opportunity to benefit from this project.”

Although the latest round of the job fairs and business sessions have been completed, people interested in jobs on Site C construction are encouraged to apply directly to the companies working on the project: • Site C jobs are being posted on the websites of WorkBC (www.workbc.ca) and Employment Connections (www.employmentconnections. bc.ca).

• BC Hydro is providing the names and contact information of contractors working on the Site C project at: www. sitecproject.com/jobopportunities/how-toapply.

Page 53

retention and friction.

RPB Series tapered roller bearings feature rugged split cast-iron housings and cartridge inserts. The inserts are field replaceable to simplify maintenance and maximize uptime.

The bearing cartridge is designed to compensate for ± 3 degrees static misalignment. Patented felt lined seals, mounted between the races, act like a filter, and a rotating flinger helps repel contamination buildup on the seals. A positive lubrication system

allows direct grease flow into the bearing.

Life Cycle Engineering Services Regal Power Transmission Solutions Lifecycle Engineering will present its support services that maximize equipment performance and lifespan.

In addition to hardware, Regal engineers provide diagnostics, training/education, design, installation, monitoring and repair. The program aims to increase customers’ OEE (overall equipment effectiveness),

improve energy efficiency, increase product output and customer success with cost-effective solutions from a single provider/ partner who takes “ownership” of critical mechanical power transmission and material handling systems.

As part of the exhibit, a machinery health-monitoring system will display the condition of key operating components in a mechanical drive partially submerged in sand. b

• Find out more about the types of jobs being hired for Site C construction at: www.sitecproject.com/ job-opportunities.

• Businesses interested in working on the Site C project are encouraged to: • Register with the Site C Business Directory at: www.sitecproject.com/ business-and-job-opportunities/site-c-businessdirectory.

• Register with BC Bid (www.bcbid.gov.bc.ca) to receive information about Site C procurements.

• Monitor the Site C website for business opportunities at: www.sitecproject.com.

The construction of Site C will create 10,000 personyears of direct construction employment over the eight years of construction and approximately 33,000 person-years of total employment through all stages of development and construction. Peace River Hydro Partners alone – through its hiring entity Petrowest Corporation in Fort St. John – will require 600 workers by early summer of this year, before peaking at 1,500 workers in 2018.

“We are very pleased with the response from the job fairs,” said Ardith Brule, Human Resources Director for Peace River Hydro Partners. “We received several thousand resumes and are in the process of reviewing them. There are a lot of good candidates that we will interview in the coming weeks to fill various labour and management positions.”

“The construction of Site C is providing an economic boost for northern B.C. and the province,” said Jon Garson, President and CEO, B.C. Cham-

ber of Commerce. We’re pleased to have partnered with BC Hydro to host the job fairs and business networking sessions. This is an important project for B.C. and its construction is creating needed employment and business opportunities.”

Construction of the Site C Clean Energy Project started in July 2015 and will be completed in 2024.

Once built, Site C will provide clean, reliable and cost-effective electricity for more than 100 years. b

BLADES angle, straight, & U for all sizes RIPPERS single or multishank for all sizes WINCHES rebuilt, complete for all sizes

Source: BC Hydro

UPCOMING AUCTIONS • April 21st | Industrial Auction, Edmonton, AB • May 10th | Industrial Auction, Barrie, ON • May 11th | Marine & Rec. Products, ONLINE ONLY

AeroAuctions.com | 866-375-6109

780-962-8586 ATTACHMENTS

Source: Regal Beloit

EMAIL: CRAWLERSALES@TELUS.NET FAX: 780-962-9465 Edmonton, AB

PARTS NEW, USED & REBUILT PARTS & COMPONENTS

KOMATSU 100 units dismantled

EQUIPMENT 1978 D155A-1 1995 D37E-5

CATERPILLAR 15 units dismantled

2005 D31EX-21

CARCO - PACCAR 75 winches dismantled

2004 D31PX-21

ALLIED - HYSTER 75 winches dismantled

2004 242 SS

SUPERPAC 600P SUPERPAC 660P

Page 54

page 54 · april 2016

classifieds Supply Post Western Canada Edition · supplypost.com

to place an ad, call 1-800-663-4802 or visit www.supplypost.com

attachments 2007 CWS Buckets EX-270. Dig, CUP, Quik Coupler, Hyd. Th. Fit EX-270. All good condition. $11,000. Kamloops, BC. afm@nwfortec.com Phone: (877) 682-6337 60” T-MAR Grapple To fit a live heal Log Loader. $17,500. Powell River, BC daren.k.brown@gmail.com Crushers, Pulverizers, phone: (604) 483-8023 Shears! Own or Rent. vanedequipment.com Phone: (604) 888-9020 Phone: (877) 255-9293

EXCAVATOR ATTACHMENTS . S e v e r e d u t y rakes, thumbs, couplers, rippers, grapples, pulverizers & shears. Made in Canada. Fast lead times. www.trkattachments.com PHONE: (905) 641-9981 Brand new Cat 140-H Multi Shank Ripper. $12,000.

Surrey, BC. phone: (604) 834-0492

buckets

Profitable hydro-vac, vac & sewer truck sales business. Needs new location and expansion. Owner retiring. Serious inquiries only. Edmonton, AB. sales@hydrovacsun limited.com

cone crushers

KENT MACHINERY LTD. Generator & Diesel Engines. We do repairs, custom building and/ or rebuilding + sales and service. Established since 1985. Business for sale, owner retiring. $80,000 includes everything!!

Salmon Arm, BC. Gary: (250) 833-1875

Screen/cone plant: 6 x 16 three deck JCI screen, LS1200 Cone. $385,000.

Surrey, BC. Brander: (604) 328-3629

• Aftermarket Parts Source To Fit Your Waratah Processor • Rebuilt Waratah Processors Available • Trade In Or Rebuild Your Waratah • Repairing Waratah Computers • Repairing IQAN Skidder/ Buncher Joysticks • Can Ship Anywhere

www.axisforestry.com 1-888-678-2947

New & used conveyors, from 20' to 120', radial or transfer conveyors, quick delivery. tyalta industries inc. phone: 1-800-960-9939

cranes

2004 Peterbilt 330 Series with 500D National Crane, 68 feet of main boom with a 25 foot jib, capacity alert, 40 rears, 330 hp, 301,420 kms, this unit has been used in the truss industry since new, doing light duty camps 18” and 24” conveyors. crane work. Recent MVI Various lengths from 35’ Winterized and Portable and Crane Certification. to 65’. HD channel design.

30 man Shower/Change Low hours. From $6,000 to $76,500. Pitt Meadows, Room Trailer Rentals.

BC. $10,000 SilverDryMiningSystems. HUGH: (604) 657-7167 blaine@canridge.com phone: (604) 341-2240 com

Cat Hydraulic Q/C and Cat 2012 John Deere 624K. 4 cu. yd Q/C Bucket w/ Quick Change and Bucket. BOE to fit 950G or H load2,400 hours. Like new con- er. Very good condition.

1992 GP bucket as new for dition. Serial #: AT322717. $6,750 OBO. Call or text Volvo L330/320. $7,500. $9,995 OBO. Naniamo, BC. for more info.

Trail, BC. c p a r c h e r @ c o a s t l a n d phone: (250) 371-1498 phone: (306) 609-0072 m m c c o n n a c h i e @ k e s - wood.com burners group.net Phone: (604) 837-1055 phone: (250) 368-7044 Mobile incinerators. www.abcdestructor.com Caterpillar D9H Dozer phone: (604) 240-1111 Blade and Push Beams. $7,500 OBO. Cranbrook, Luxury 52 man Camp! C/w businesses BC GARBAGE DISPOSAL desalination system, A/C, gmtf@shaw.ca firm. Serves the mining incineration, heli-pad, interPhone: (250) 489-9502 industry in our small town net throughout and TVs in of Iskut, BC. We also sell all rooms. For sale or lease propane + are a local with full service catering freight agent. Includes a hooklift truck & 30 bins. available. Located on the 12 to 40 yards. Property is West coast of B.C. Shaw Bros. Attachments optional + other equipment. phone: (604) 269-2002 for excavators, loaders, Suits mechanically inclined TREE-TOW SKIDDING skidsteers, crusher buck- person who wants to move Self-contained 10 man and GRAPPLE to fit 650H ets, screening buckets, away from the big city life 15 man float camps for John Deere Crawler. Good thumbs, breakers, grap- and live upcountry. Owner lease. 50 man float camp condition. Grapple opens ples, snow equipment & wanting to retire. Dease also available. Dry rental or to 6 feet. $7,900 OBO. much more at best prices.

Lake area, BC. Respond catered.

Princeton, BC. www.shawbros.ca by email to: mike: (250) 949-1561 phone: (877) 625-9677 phone: (250) 295-8046 whiskeyjoe@icloud.com

AXIS FORESTRY INC.

April 2016

DEERE CONSTRUCTION Parts & Components

One of the largest inventories of used, rebuilt, and new surplus Deere parts and components in North America.

We also stock parts for Hitachi, Timberjack, Caterpillar, Ditch Witch and can locate those hard to find parts that we may not have in stock.

BRANDT VALUE PARTS

1-877-685-4886

conveyors

2013 Kolberg-Pioneer Inc. Scale, 125 foot conveyor. $120,000. Oliver, BC. Phone: (250) 485-8583 600' of 36" channel conveyor. 40' sections only, no belt, no legs. Call for pricing. steve - aggtech phone: (604) 857-3107 Telsmith 2080' 30" steel conveyor, 20' section, FMC rollers, 2 drive systems, brakes and gravity take-up. $50/foot. steve - aggtech phone: (604) 857-3107

Advertise your machines in the classifieds! Call Michelle for deadline and rates.

PHONE: 1-800-663-4802

crawlers

2014 Case 650L Crawler Tractor. 147 hrs. C/w winch, showroom condition. Lost our work. $128,000. Whitecourt, Alberta.

Phone: (780) 396-1478

FOR SALE

GRANITE ROCK QUARRY AND SAND & GRAVEL • 100 plus acres!

• Approximately 15 million cubic yards of granite rock.

• Gravel 12 million cubic yards.

• All equipment included in price.

• Asking $1,500,000.

Highway #4, Parksville - Qualicum area on Vancouver Island, BC. Call for more information:

Phone: (250) 758-7652 Cell: (250) 756-8532

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Large inventory of used and rebuilt Detroit Diesel, CAT 9H DOZER 90V4641 Cat, Cummins, Perkins, Udozer Orops 4 Brl. Ripper Deutz and Volvo engines.

90% U/C $74,500.

Prince George Truck & D7G 92V10215 DAT, Guarding, Winch/Arch 80% Equipment 1997 Badger 670. phone: 1-800-946-9400 U/C $47,500 Ex-municipal telescopic 2000 Cat D8R For Sale D7 & D9 C frame Clearing or (250) 561-1234 excavator. Low hours. Runs Complete service records B l a d e s $ 6 , 5 0 0 e a .

Can’t find what you are well .64" ditching bucket Gibsons, BC New rollers/Idlers Recent looking for? Thousands of + 36" rock bucket. 13,000 ken: (604) 290 8209 work orders SU Blade or more machines and equipkm.Maintenance records.

D.A.T Blade Call for more Advertise your machines in the classifieds! Call ment for sale on: $19,500. Vernon, BC. details. Kelowna, BC Michelle for deadline and www.supplypost.com Phone: (250) 558-9014 pausch.equip@shawcarates. ble.com excavators PHONE: 1-800-663-4802 1989 Cat 235C-RB phone: (250) 470-8688 Excavator, c/w 2 buckets,

Page 55

dozers

drills

thumb & guarding. $25,500

Crushing Equip.

OBO. Enderby, BC. phone: (250) 558-9644

feeders 2013 Hitachi ZX250LC-5 Excavator. Q/C, aux hyds, 2009 5-16 Thunderbird 2010 Bucyrus R30C Blast 32” pads. 3,400 hours.

Screen Deck Crusher. Hole Drill in excellent conPrice upon request. Jerry 1200 LS Cone. $380,000. dition, 4,000 hrs, ready to Ryan Equipment Sales Ltd. work. $249,000. Located in Oliver, BC. St Albert, AB Langley, BC. Phone: (250) 485-8583 jtceryan@telus.net phone: (604) 897-1396 Phone: (780) 915-5426 For all your crushing equipment requirements.

Sales, service and parts mormak equipment phone: (250) 542-7350 vernon, B.C.

ENGINES

Cat C9 Engine To fit 330c log loader. 1,000 hours. $27,500 Powell River, BC daren.k.brown@gmail.com Phone: (604) 483-8023

Wanted: Hitachi 350 or 450 Excavator, in good running condition. cookisle49@yahoo.ca phone: (867) 993-4450

Bob’s Diesel Repairs Phone: 250-766-3833 Diesel Generator Sets - 30 kW to 150 kW Units

Cummins, Cat, Detroit Diesel Repairs

Sexsmith Used Farm Parts Ltd. Sexsmith, AB www.usedfarmparts.com E-mail: farmpart@telusplanet.net

DiSmAntLing: • LoADErS: Case 621, JD 644C, JD 544B, it14B Cat, W14, W20 Case, mF 33D CrAWLErS: Komatsu D53A, Case 1150B ForKLiFtS: IHC 4500, MF 6500 • GRADERS: Champion 720A SKiDStEErS: gehl 4625, melroe Bobcat 943, 863, 853, 843, 610, Case 1845, 420 nH BACKHoES: JD 610T, JD 310D, Case 580B, Case 780

A LArgE SELECtion oF: tEStED DiESEL EnginES.

Cummins, Cat, Perkins, JD & Case

1-800-340-1192

Buying Equipment For Dismantling

per. 24” belt. 7.5 yard hopper. Very HD design. Low hours. $25,000 HUGH: (604) 657-7167

APRIL SPECIALS

10718 Seaton Rd., Winfield, BC

• 3406 Cat 200 kW, 12 Lead • Cummins 230kW, 12 Lead SOLD • John Deere 175 kW, 12 Lead • Cummins 175kW, 12 Lead • Rebuilt Cat 3304 Diesel Engine • Rebuilt Cummins 8.3 Engine • Rebuilt Cat 3406B SOLD • Used Cummins 6CT 8.3 • Used Detroit 6V92T

Stationary direct feed hop-

ExCAvAtoRS 2002 Caterpillar 320CL, 10,200 hrs., mech thumb, aux hyd, 2 bkts, one owner, well maintained. ................................................................. $65,000 2006 Hitachi ZX200LC, 9,300 hrs., hyd thumb, one owner. . ...... $75,000 2003 Hitachi ZX350H, thumb, 9,000 hrs. . .................................... $65,000 2007 Hitachi ZX50U-2, 1,885 hrs, blade, hydraulic thumb ....... SOLD SKID StEERS 2010 Bobcat S650, A/C cab, Hi-Flow, 2,550 hrs. ........................ SOLD CoMPACtoRS 2010 Dynapac LG500, Hatz diesel, 100 hours, like new................... $7,500 2008 Hamm HD12VV, double 47" drums, 660 hours. .................... $27,500 WHEEL LoADERS 1999 Caterpillar 988FII, 2ZR, 24,150 hrs, stick steer, lube system, oil samples. ........................................................................................... $72,500 tRUCKS 2004 Ford F550 XL Super Duty, dump truck, 64,000 km, diesel, auto, pintle hook, tarp, like new ........................................................... SOLD 1975 Caterpillar 769B, 99F, running unit, good rubber ................. $27,500 APPRAISALS • CONSIGNMENTS LOCATE & PROCURE • 45 YEARS EXPERIENCE

Cell: 604-626-6803 TUNDRA EQUIPMENT CONSULTING Hugh Bruggen-Cate, Abbotsford, BC

Email: hbruggencate@shaw.ca

Now Selling Buncher Teeth CALL For UNDerCArrIAGe, AFTerMArKeT pArTS, AND BreAK-Up SpeCIALS. Equipment For Sale 1993 CAT 950F BUCKET MACH. .............................. $47000 CAT 980B BUCKET MACHINE C/W 3RD VALVE ............ $22900 1-2001 HysTER H80XM FoRKLIFT 8000LB ..................CALL 2006 yALE GLP090LP FoRKLIFT 9000LB .....................CALL 2-2009 ToyoTA 7FGKU40 FoRKLIFT 8000LB ...............CALL

Wheel Loader Attachments IT38G WBM Q/A GP BUCKET ........................................CALL BUCKET WA250 108” LIGHT MATERIAL ......................... por BUCKET 78” CAsE 850 NEW ..................................... $1200 BUCKET 107” sLIP IN ................................................ $2000 BUCKET 950 ............................................................. $1500 CHIP BUCKET 938F/G ..................................................CALL CHIP BUCKET 966F ......................................................CALL CoUPLER 950 G/H ..................................................... $4750 LUMBER FoRKs 930 sIZE ............................................CALL 966C TooTH BUCKET ..................................................CALL 980G WBM LoG GRAPPLE ............................................CALL

Dozer Attachments BLADE D7G UDoZER .................................................. $4500 BLADE D8K UDoZER .................................................. $6000

Excavator Attachments BUCKET JD50D-38” CLEAN-UP .................................. $1500 BUCKET 330 – 46” DIG Q/A........................................ $3500 BUCKET 160 – 30” CWs NEW Q/A ............................. $2300 BUCKET 200 – 60” CLEAN-UP, NEW ........................... $3900 BUCKET 325 - 66” WBM Q/A...................................... $2500 BUCKET 325 – 66” FAs Q/A ....................................... $3500 BUCKET 300 – 42” DAEQUIP Q/A ............................... $3900 BUCKET 330 – 73” ML Q/A ....................................... $3000 BUCKET 330 – 72” ACCURATE Q/A............................. $3000 BUCKET EL300 -48” WBM ......................................... $1500 BUCKET 300 – 42” WBM ........................................... $4800 BUCKET 330 – 72” WBM............................................ $3500 BUCKET 330 – 72” WAJAX ......................................... $3500 RIPPER 250 sIZE........................................................ $3500

Miscellaneous SOLD sET NEW CAT 330 TRACK GRoUPs 28’ DBL BAR .................

950G REAR AXLE CoMPLETE RoLLoUT........................CALL 966F REAR AXLE CoMPLETE RoLLoUT ........................CALL CAT 3304DI ENGINE ................................................. $6500 CAT D7 UsED sF RoLLERs 95% ..................................CALL 936 BooM ................................................................. $2000 950 BooM ................................................................ $1500 JD2154 TRACK TENsIoNERs ..............................................

SOLD JD 2454/2554 BooM & sTICK ................................. $6500 CAT 3306 LoNG BLoCK ...............................................CALL 4 - 23.5X25 NEW TIREs ...............................................CALL 20.5X25 UsED TIRE CHAINs.........................................CALL 23.5X25 UsED TIRE CHAINs.........................................CALL

We SeLL: replacement parts For Caterpillar.

Undercarriage, engines & Transmissions, Grader Wear parts, Boom pins & Bushings, Bucket Teeth & Cutting edges

CORY 250-320-4070

cory@hdpartsltd.com

MERLIN 250-819-4444

merlin@hdpartsltd.com

Page 56

BanninG EquipmEnt ltD

Supply Post Western Canada Edition · supplypost.com

feller bunchers

generators

8901 Penn Road, Prince George, BC Phone: 250-564-7226 Fax: 250-564-7233 Email: scott@banningequipment.com

EquipmEnt For SalE

2008 - 304CCR - 2 Buckets, Thumb .................................. $58,000 2006 - 330D - 2 Buckets, Thumb ..................................... $110,000 1998 - Madill - 3200B Feller Buncher ............................. $55,000 1986 - P&H Omega 100 15 Ton Crane .............................. $29,500 1981 - P&H Omega 100 20 Ton Crane .............................. $37,000 2005 - 950G - Forklift........................................................... $49,500

DoZEr attaCHmEntS

Blade - D6D - Brush Rake WBM ...................................... $3,500 Blade - D6T - Brush Rake Adjustable ............................... $6,500 Blade - D8K - Brush Rake WBM ....................................... $6,500 Blade - D7R - SU C/W Arms ............................................ $15,000 Blade - D8R - DAT Blade & C-Frame .............................. $25,000 Ripper - D6N - Cat M/S ..................................................... $12,000 Ripper - D6R - Cat M/S ..................................................... $14,500 Ripper - D7G - Cat M/S ....................................................... $6,500 Winch - D7R - Cat 1KM Power Shift .............................. $18,500 Winch - D5H - Cat P/S Winch Rebuilt ............................ $17,000

WHEEl loaDEr attaCHmEntS

Bucket - 950F - Q/A WBM GP ............................................ $4,500 Bucket - 966K - Q/A Fusion Lugging.................................. $8,500 Bucket - 966G - 125” GP *New* ....................................... $7,000 Bucket - 980C/F GP BOE *New* ....................................... $8,000 Bucket - 980H - GP Tips .................................................... $12,500 Bucket - 310 - 4 in 1 92” *New* ........................................ $4,750 Coupler - 950G/H - WBM Hydraulic *New* .................... $7,500 Forks - IT28G - Cat Q/A ....................................................... $4,200 Forks - IT38G - Cat Q/A ....................................................... $4,500 Forks - 544K - JRB Q/A ....................................................... $3,500 Forks - 966G - WBM Q/A 48" .............................................. $6,500 Grapple - 928G, IT28G - Pipe ........................................... $12,500 Grapple - 938G, IT38G - Pipe ........................................... $12,500 Grapple - 966G - Weldco Beales Log.............................. $10,500

motor GraDEr attaCHmEntS

Compactor - 140H - Follow Me Wobbly ......................... $12,000 Compactor - 14H - Handi Hitch ....................................... $13,000 Ripper - 140H - Cat M/S .................................................... $12,500 Ripper - 14H - Cat M/S ...................................................... $14,000

ExCavator attaCHmEntS

Brush Rake - 200 - 60” WBM Q/A ..................................... $5,000 Brush Rake - 200 - 60” CWS Q/A ...................................... $5,000 Brush Rake - 200 - 60” Finning Q/A ................................... $6,000 Brush Rake - 250 - 72” New M/L WBM Q/A .................... $8,500 Bucket - 200 - 30” WBM Q/A ............................................. $3,500 Bucket - 200 - 60” Finning Q/A .......................................... $4,500 Bucket - 200 - 60” WBM Q/A ............................................. $4,500 Bucket - 290 - 42” WBM Q/A ............................................. $4,500 Bucket - 290 - 66” Finning QA ........................................... $4,950 Bucket - 290 - 66” WBM Q/A ............................................. $4,950 Bucket - 330 - 36” WBM Q/A ............................................. $5,500 Bucket - 330 - 48" WBM Q/A .............................................. $6,500 Bucket - 330 - 72” Finning QA ........................................... $6,500 Bucket - 330 - 72” WBM Q/A ............................................. $6,500 Bucket - 450 - 42” Finning Q/A .......................................... $5,500 Bucket - 450 - 48” CWS Q/A .............................................. $9,500 Bucket - 450 - 54” WBM Q/A ........................................... $12,000 Bucket - 450 - 84” WBM Q/A ............................................. $9,500 Canopy - 329E - FOPS Canopy *New* .............................. $7,500 Grapple - 450 - WBM Heel Boom .................................... $10,000 Ripper - 200 - WBM Q/A ..................................................... $3,000 Ripper - 250 - WBM Q/A ..................................................... $3,500 Ripper - 330 - Finning Q/A ................................................... $4,000 Thumb - 200 - WBM Hyd C/W Coupler ............................ $4,500

SnoW rEmoval

Blade - 930G - M/L Hyd Angle New................................ $16,500 Blade - 938G - M/L Manual Angle New QA .................. $14,900 Blade - 930G - AMI Hyd Angle *NEW* .......................... $12,000 Blade - 624J - WBM Hyd Angle ..................................... $12,000 Blade - 772D - WBM 104”................................................... $8,500 Blade - 872G - Brandt 133” ................................................ $9,500 Blade - 140M - WBM Hyd Angle ..................................... $15,000 Snow Wing - 140H - Lo-Pro WBM .................................... $8,000 Snow Wing - 14H - WBM Ripper Mount ........................ $9,000 Snow Wing - 140M - WBM Ripper Mount .................... $12,000 Snow Wing - 14M - WBM Ripper Mount ...................... $14,000

2003 Prentice Tilter 730A Feller Buncher. 11,000 hrs.

Comes with 24” saw head machine. It is in good running order. Low hours on engine. Rotec replaced. $33,500. Campbell River, BC. phone: (250) 287-0350

Cummins 125 Kw skid mounted,

enclosed

genset. 120/208V -1ph or 240/480V-3ph. 1550 hours. $28,000 HUGH: (604) 657-7167

forestry 330c Log Loader Stick, main boom, counter weight, heat, fuel and hyd. tanks, hood, car body, main cylinders, track adjusters, grapple. Powell River, BC daren.k.brown@gmail.com Phone: (604) 483-8023

April 2016 Buying & Selling Used Gensets, Diesel and Natural Gas. www.raylewpower.com phone: (800) 295-5960 400 kw generator, 12V71T engine, 300 hrs. $30,000 OBO. Onan 277 kw 347-600 powered by 855 Cummins.

264 hours. $27,500. Port Clements, BC. randy@obrienlogging.com phone: (250) 557-4282 Can’t find what you are looking for? Thousands of more machines and equipment for sale on: www.supplypost.com

graders

forklifts 1993 Hyster 210XL Forklift. 21,000 lbs. Perkins Diesel. New paint. $18,500.

1983 Hyster H180 Forklift.

18,000 lbs. New paint. $10,500. A/C & heater for both. Also: 50 Forklift forks. (singles & pairs). P.O.R. Cache Creek, BC. phone: (250) 457-0099

S R 4 B 2000 Cat 160H Grader.

15,000 hrs, c/w snow wing, Generator. 1500 KW. front dozer, engine prePortable Gen Set, 3512B, heater, transmission rebuilt 480V, 3 phase. Control @ 7,000 hrs, 2 sets tires, panel, switchgear, 1500 painted, owner operated. gal fuel tank. $115,000. Lost our work. $95,000.

Oliver, BC. Whitecourt, Alberta. phone: (780) 396-1478 Phone: (250) 485-8583 1995

Cat

122 Madill Grapple Yarder For Sale 124 custom built Madill boom, 60" riser, N14 select engine and A/C. Includes 3 grapples, butt rigging, drop line carriage, radios, straps & blocks and climbing gear.

Can be sold with or without all extra rigging. $495,000 OBO.

d & d loGGiNG Powell River, BC brothwell@ddlogging.com Office: (604) 485-4401

Cell: (604) 483-8215

Zf Transmissions & DifferenTials

- Rebuilds & RepaiRs Moxy, Terex, Volvo, John Deere, case - specializing in off-highway applications - quality and cost-effective work - on-site testing and troubleshooting - available 7 days a week

Also offering on-site repairs and servicing of all makes of construction and agriculture equipment.

Dolphin Mechanical Services Ltd. Langley, Bc - call Eric 604-314-8032 dolphinmechanicalservices@telus.net

1995 Champion 740A Grader, c/w snow wing, dozer assembly, & 2 sets of tires. 6,992 hrs. Good, strong grader. $50,000.

Whitecourt, Alberta. phone: (780) 396-1478 2007 VOLVO G990 GRADER c/w ripper. 6,700 hours. $110,000. Calgary, AB phone: (403) 291-1010

grinders

2008 Bandit 3680 Tracked Wood Grinder.

2,641 hours. 700 hp , pro heat, remote control. extra screens, new discharge belt. $295,000 OBO. Raven Center Holdings, Fort St John, BC. gary@ravenoilfield.com Phone: 250-787-8474

Cypress 7280 BC Grapple Yarder For Sale Well maintained. Can be seen working.Good condition.

$550,000.

Duncan, BC.

Phone: (250) 510-4215 northviewtimber@shaw.ca

For Sale

300kW Genset, 50 series Detroit ............... $9,500 Gold Wash Plant ............................................. $9,500 80 kW John Deere Genset ........................... $8,500 125 H.P. Fine Ore Crusher .........................$13,000 Booster, Single Axle to Fit Lowbed ........... $2,100 2 LNG Cryogenic SS Tanks ....................$5,500 ea.

Gear Reducers & Electric Motors, all sizes .. Cheap!

Magnets & Electromagnets, all sizes..... ......P.o.r.

Mag Motor Starter, MCC’s, all sizes . .............Cheap!

32ft Ramp Barge, Truckable, Carries EX200.. $95,000 40' x 80 ft Bolt-together Butler Bldg. ......... $4/ft.

5' x 25 ft Rotary Trommel Screener .......... $5,500 Pumps: 4", 6", 8", 10", 12" ..........................Cheap!

Pulverizers & Grinders, Hammer Mills ......Cheap!

Transformers & Switch Gear, all sizes.......Cheap!

Phone: 604-250-5325 email: mike7777@shaw.ca

April 2016 .

Supply Post Western Canada Edition · Our Readers Are Your Buyers

mining Equip.

hammers

miscellaneous

Superior variable speed Grizzly belt feeder. Hopper is 20 ton capacity. 200 hrs use. $40,000. Located in YK. NEW! 2013 Hai-Lin Wheel auremalliance@hotmail. I-Beam for sale, 50’L x 8” x Loaders. 4WD with buck- com 10”. Asking $12/foot Metal ets. Choose from HL912 phone: (509) 951-3156 Plate for sale. 8’ W x 30’ L at $12,995 USD, HL918 Rubber-lined 150 hp 10x10 x 1/4” Thick. $0.16 per lb. at $14,995 USD, HL930 Slurry Pump with controls Wainwright, Alberta.

Turbo at $24,995 USD, and electronic eye and Phone: (780) 842-8622 Hammers to fit your carrier! 14K Gooseneck $9,995 tank. Approx. 200 hrs use.

Own or Rent.

CAN. Abbotsford, BC Supply Post publishes $40,000. t u f f - t r a i l e r - m a r c @ auremalliance@hotmail. nationally with an East and vanedequipment.com hotmail.com Phone: (604) 888-9020 com West edition, need a copy? phone: (604) 607-0060 Phone: (877) 255-9293 phone: (509) 951-3156 PHONE: 1-800-663-4802 2 yd - 6 yd Used Hyundai Can’t find what you are Loaders c/w warranty. looking for? Thousands of Different attachments avail. more machines and equipphone: (800) 661-4634 ment for sale on: EXCAVATORS Cat 980F. Asking $69,000 www.supplypost.com • 2000 John Deere 80, 5,500 original hrs, blade, 3 OBO. bkts, hyd. thumb, brush rake, immaculate cond. .......... loaders (Log) 2004 Cat 980G. Asking ........................................................................$42,500 $129,000 OBO. Langley, Komatsu 2005 PC270 • 1994 John Deere 590D, quick attach, 2 bkts, hyd.

BC. Log Loader. 14,000 hrs. thumb, cab guard, good U/C. .........................$32,500 dave@infinitywest.ca Undercarriage done at • 1999 Hitachi EX150-5, 6,500 hrs, 2 bkts, hyd. thumb, Phone: (604) 240-7977 10,500 hrs. Good condigood U/C, work ready. ....................................$42,500 tion! $70,000 O.B.O. logging • 2008 Cat 330D Excavator, 12,000 hrs, 2 buckets, phone: (250) 694-3459 hyd. thumb....................................................................

SOLD

LNH EQUIPMENT

2004 Kobelco 330 Log Loader. Asking $55,000 OBO. Langley, BC. dave@infinitywest.ca Phone: (604) 240-7977 1995 Hitachi EX300-3, Need log marking hamburnt, parting out; 1999 mers? Overnight delivery, Hitachi 330-5, burnt, part- most cases. Achinback ing out. 2000 Hitachi 370, F o u n d r y , # 1 0 3 - 1 0 1 7 Dunford Ave, Victoria, BC. burnt, parting out. phone: (250) 474-0037 phone: (604) 240-7977 or: (877) 474-0037

loaders (Wheel) 1987 MICHIGAN 190 WHEEL LOADER. 29.5” x 25” tires. 350 Cummins, grapple, low hours. $16,000. Quesnel, BC Phone: (250) 992-3010 2001 Komatsu WA 3803H Wheel Loader, 8.3 litre Cummins. 12,263 hrs. Regularly maintained.

4 new tires. New turbo.

11,600 hrs. No issues.

Great, used machine! $65,000 OBO. Agassiz, BC armix@telus.net phone: 604-793-5099

1999 Caterpillar 950G. 9,400 hrs. Exc cond. $79,000. Victoria, BC. info@tractortime.com phone: (250) 588-2195 2004 Cat IT28G Wheel Loader. 12,000 hours.

Forks and buckets. $56,000.

Cache Creek, BC. phone: (250) 457-0099

lumber 3" & 4" Lowbed decking up to 24' long. 2x8 truck decking 12' to 24' long. Treated timbers & plywoods.

Swamp pad timbers, 8x8 10x10 - 12x12 - to 30' long.

Bridge timbers cut to size.

Poles for pile driving, any size. Metal roofing and wall cladding. We deliver “even to the moon”. can-ambuildingsupply@ shaw.ca can-am lumber mill phone: (604) 580-1415

mills

ATTENTION: FARMERS, L AN D O W NE R S & CONT R ACTO R S !

Bandsaw Mills – Sizes available to cut down large trees at any length that you desire! Canadian made with top quality, strong products, with operator in mind. portablebandsawmills.ca phone: (877) 537-5099

WHEEL LOADERS • 2000 Hyundai HL750, 6,500 orig. hrs, new rubber, 20.5/25, Cummins eng. 3rd valve, Quick Attach w/ GP bkt....................................................................$39,500 • 1975 Cat 966C, good runner, c/w log grapple & slipon bkt, good rubber .........................................$17,500 DOzERS • International TD7 Bulldozer, 4 cyl, diesel, 6 way blade, runs well ...............................................$12,500 • John Deere 450C, 6 way blade, power shift, winch, runs well. ...............................................$12,500 OBO • John Deere 650G Dozer Good U/C Complete for Parts, fire damage winch and arch. .........CALL NOW ATTACHMENTS • Cat 48” Dig Bkt, WBM lugging, good cond. ................ .................................................................$4,500 OBO • Cat 330 Brush Rake, WBM lugging ........$3,500 OBO • Various buckets to fit all sizes of machines, clean up and digs. ....................................................... CALL • Rammer/Allied G110 Hyd. Hammer, recent work orders, lugged for Cat 345.................................. CALL PARTS FOR SALE • Hitachi ZX330, stick c/w cylinder & linkage, Q/C, C/U bkt ......................................................CALL NOW • Cat 936E, complete front and rear differentials • Cat 950A, complete front and rear differentials • Cat 16G, ripper complete ..........................CALL NOW • D8K, multi shank, ripper complete ............CALL NOW ENGINES • Cat 3406A, runner ....................................CALL NOW • 5.9 Cummins parts engine .......................CALL NOW • 4 cyl. John Deere 4039T Turbo, runner ..CALL NOW WRECKING • Cat 330 BL Excavator..............................CALL NOW • Wagner 4100 Log Stacker .......................CALL NOW • Hyundai 210-3 Excavator ........................CALL NOW • Cat 315BL Excavator, fire damage, c/w thumb & bucket ........................................................CALL NOW • Cat 966C complete machine for parts.......CALL NOW Always looking for quality used equipment! Financing Available!

Call Today:

TF: (888) 494-3710

Cell: (250) 938-4257 lnhequipmentltd@gmail.com

Page 57

equipment available Call ed at (250) 318-8870 Kamloops, bC

www.e-quiptrading.com equipsells@shaw.ca EXCAVATORS / BACKHOES / DOZERS 2006 john deere 270c-lc, very clean and straight, 80% undercarriage, 32” pads, catwalks, new hydraulic thumb, 2 buckets and quick change, 7,200 hrs. Also available w/Tysea (demo) Pipe Grapple. Call for more information. ............. Buy Outright or Rent to Own. Offered at $84,500 2006 john deere 225c-lc, 2 buckets and hyd. thumb, 7,400 hrs, nice machine, no leaks, delivery today. .................................... call for Price 1996 hitachi EX270-lc Guarded, 10,000 original hours! Very clean and no leaks, 2 buckets and quick change, foPs, runs great, extra plumbing for hammer (NPK 2 hammer available) ..................................... $54,500 1996 cat 330RB, hydraulic thumb, catwalks, foPs, runs good. ............. .................................................................................... Open for Offers!

SOLD

1990 case 580K 4x4 Backhoe loader, 4-in-1 front bucket, Extenda Hoe, cab, runs great, good rubber. ........................................................

1977 cat d8-K, A/Dozer, w/ Tilts, cab, CARCo J-120 winch, new group 8D batteries. .............................................................................. $36,500 MINI EXCAVATORS 2014 case cX17B c/w 2 buckets and quick change, blade,rubber tracks, under 100 hours. ........................................Rent or Purchase. $38,500 2015 case cX36-B c/w 2 buckets and quick change, blade, cab, air conditioning, under 100 hours. ...................Rent or Purchase. $67,500 2002 cat 307ssR 16,000 lb machine, 6,830 hours, rubber tracks,offset boom, manual thumb, cab, air, great shape, one owner. ........... $24,900 LOGGING EquIpMENT 2005 cat 320c w/ Waratah 622-B only 13,000 hrs, very clean machine, good U/C, works great. Low hour machine! .................... call Ed Today!

1997 cat 330Bl high Rise log loader Butt N Top Grapple, excellent U/C, runs great, looks good. Immediate delivery. ...................... $64,500 2006 link Belt lX210 Processor, c/w Waratah 622-B re-sealed, 19,700 hrs, no leaks, great price. ................................................ call Ed Today!

2003 john deere 748G111 Grapple skidder, 10,000 hrs, 70% 30.5 tires, very clean and ready to go. ...................................... call Ed Now! 2006 Madil 1200 Buncher, nice well maintained machine, Isuze engine, 285 hp, new swing box, tight machine, 22" head w/ 360 rotate, good U/C, 14,400 hrs, 10'6" wide. ..................................................... $69,500 TRuCKS AND TRAILERS 2013 Western star Tridrive sRs60, 560HP, 2 years Detroit Diesel engine warranty avail., 18 spd, 20,000lb front axle, dual strg. boxes, new BC MVI, airliner susp., triple lockers, 22.5 rubber on alum. wheels, 260" W.B. 798,000 km, 498,000 miles, nice truck, delivery today. . .... $79,500 2008 Peterbilt Tri drive c&c 265” wheelbase, Isx560 hp, Cummins, 18 speed. 69,000lb rears on Peterbilt air trac suspension, triple loks, 20,000 lb front axle, double frame, dual steering boxes, 385R22.5 steering tires, all aluminum wheels, 11R24.5 rears all good, new BC MVI, delivery today, clean, only 500,000 km, 310,000 miles. ... $79,500 2000 Freightliner With hi-Rise sleeper, C-15 515hp single turbo Cat s/N 6NZ20824, 18 spd, air ride, decent truck, double lockers, all alum. wheels, good rubber on back end, alum. cab guard. ..............................

SOLD

2001 Frieghtliner With high Rise sleeper, series 60 500hp,18 speed, air liner suspension, 40 rears w/double loks, all aluminum wheels, good rubber. ...................................................................................... $16,500 1990 Blue line Tank Trailer, tandem, 1500 gallon self dump tank, hoses etc. ........................................................................ Asking $4,500 1979 Peerless s/Axle low Bed Booster, fish mouth, 24.5 tires on 6 spoke, ready to go. ..................................................................... $4,995 1995 K-line single Axle Booster, good condition, fish mouth, air ride. . .................................................................................................. $13,500 2013 BWs double drop Machinery Trailer, 40 ton capacity, tridem, air detach neck, 24 ft well, flip over extension for tri drive tractor or s/axle jeep, like new original condition. .............................................. $69,500 2006 superior log B-Trains, 6 bunks, air ride, re-wired at rear, all 22.5 alum. wheels, good rubber, BC MVI, delivery today! Nice trailers. ......... .................................................................................................$57,500 2006 doepker super B Train lead, had previous damage and was written off, good rubber, aluminum wheels, air ride, 3 sets of 8'6" bunks w/ drop in stakes. .......................................................... Make An Offer!

2006 doepker Pup (logger), current BC MVI, good ruber 11R22.5, all aluminum wheels, 8'6" bunks w/ folding stakes. ........... Make An Offer!

MISCELLANEOuS 8 New containers in stock! sales & Rentals. ...........call Ed for Pricing 3 used 20' custom Built Office, First Aid containers let us know what you want, we can do it. ..............................................call Ed for Pricing Rental Property! 2 acres, Hwy #1 frontage! Great visibility, storage yard, equipment, truck or trailer parking. No RV parking. . ...... spots Available Buyers Waiting ...

Call ed now (250) 318-8870 Mining • Trucking • Logging equipsells@shaw.ca

Page 58

Supply Post Western Canada Edition · supplypost.com

April 2016

MITSUBISHI New and Used engines and dozer Slashbuster 480 HD with p a r t s , m a n u a l s , l a r g e long arm, swivel, grapple, inventory.

Handy Hitch gravel bale x t r a b l a d e . $ 2 0 , 0 0 0 . rhineequipment.com phone: (253) 536-0600 last packer/rollers, easy Creston, BC. www.cullbros.ca/surplus Dismantling for Parts: 2007 access, 6,000 lb doubleended spindles, 14 ply Phone: (250) 428-9868 9900I IHC w/ Cab Damage 2016 SLG-68V – DeSite tires. $19,337. Red Deer, Next Advertising Deadline -475 ISX Rebuilt Engine RD40 Read Screenall c/w P o r t a b l e V i b r a t o r y AB. -EGR Delete is: April 22, 2016. phone: (403) 396-1208 -18 Speed Transmission phone: 1-800-663-4802 extra screens. Need trac- S c r e e n i n g M a c h i n e .

-40,000 Rears Screen Topsoil, Compost, sand & gravel PARTS -390 Ratio Parker hose press, dies tor PTO to run screener. Sand, Gravel and more Quality, built in BC to your for 42, 71, 78 series, fit- W R EC K I N G P A R TS -4 Way Locks using a Mini Excavator. tings #4 to #20. Over 400 FOR SALE on a Cat 416 Sexsmith Used Farm Parts specs, Screen Decks 3' x Ready to go to work!

Produces 30 to 60 yards/ 5' to 5' x 10', Conveyors, fittings, jic, orf, flange and Backhoe. All parts avail- Phone: (800) 340-1192 hour. Only $4,200. pipe. Some hose. $6,500 able except for motor. 1995 Hitachi EX300-3 LL, Feeders, Placer. Kelowna, Priced at $19,900.

Abbotsford, BC. OBO. Savona, B.C. Gambier Island, BC burnt, parting out; 1999 BC. PHONE: (250) 320-2778 al: (604) 813-5500 Phone: (604) 776-1129 phone: (604) 886-0707 Hitachi 330-5 LL, burnt, Juniper Equipment Ltd. parting out; 2005 ZX-200 phone: (250) 470-8987 Hitachi excavator, partSuperior variable speed ing out. 1998 Cat 330 excavator, parting out. Grizzly belt feeder. Hopper Miscellaneous Cat 14G is 20 ton capacity. 200 hrs use. $40,000. Located in Grader, parting out.

Phone: (250) 833-8349 Evenings (250) 835-4678 Equipment • Attachments • Used Parts Yukon. phone: (604) 240-7977 auremalliance@hotmail.

2463 Townline Road, Abbotsford, BC, Canada • (604) 855-9977 machines for sale com powervans phone: (509) 951-3156 HD21 Allis-Chalmers Crawler Dirt Blade and Clearing EqUiPmEnT fOR SAlE Cat Power Van 600kw, Blade ................................................................ $22,000 sawmills switch gear, tower and 618 TJ Buncher ................................................ $21,000 CRAWLER TRACTOR: tank.$175,000. Surrey, BC. 520 TJ Line Skidder ......................................... $14,000 Cat D8N (1990) cab, MS ripper, DAT blade, 60% U/C. .... $95,000 Brander: (604) 328-3629 125 International Track Loader, 4-in-1 bucket .... $11,000

mulchers

Oversized equipment services

Wally’s Private Parts Quality Used Parts

350 TJ Line Skidder ......................................... $11,000 668C Line Skidder ............................................ $20,000 220 Komatsu w/ 3500 Demarco ....................... $26,000

EXCAVATOR: Cat 320L (1996) cab, q/c, buckets. ................................. $43,000

ROCK TRUCK: Cat 769D (1999) flat floor box, 80% tires, clean, records on file. .........................................................................................$95,000

ATTAChmEnTS • 290 Button Top Grapple

• 325 Button Top (IMAC)

• Excavator Buckets Of All Sizes

• Short Wood Grapple (12’)

• Buckets - Clean Up / Digging

• Demolition 5 Finger Grapple

• L120 GP Bucket

USED TRACK GROUPS Model Section PC220 52 330BLC 51 345BLC 52 JD600 52 345BLC 52

Pitch 7.5 8.5 8.5 9.0 8.5

Pad Width (Bar) Remaining 28” (2) 85% 36" (3) 90% 36" (3) 80% 36” (3) 50% 32" (3) 80%

hYDRAUliC CYlinDERS

ParTs machines M I L L S – B L A D ES – SHARPENERS 3 models of mills available to suit 20’ sea can, Cutler your milling needs, startHammer MCC, Control ing at $135/month to lease. console, Plug box, Man Perfect for ranchers, wood door, lights & plugs. Very lot owners, or just the back low hours. $27,500 yard enthusiast!

HUGH: (604) 657-7167 portablebandsawmills.ca pumps PHONE: (877) 866-0667 Rubber-lined 150 hp 10x10 Slurry Pump with controls and electronic eye and tank. Approx. 200 hrs use. $40,000. auremalliance@hotmail. com phone: (509) 951-3156

PORTABLE SAWMILLS INDUSTRIAL SAWMILLS BLADES & BLADE MAINTENANCE. PHONE: (877) 866-0667

rollers

screeners

Stick boom and bucket cylinders all models, rebuilt or as is, no core required on most models.

fORESTRY ATTAChmEnTS Button Tops, Heal Racks, Denarko Heads, Pierce Heads, & Risley Heads

COmPOnEnTS in STOCK • Final Drives

• Swing Boxes

• Wheel Planetary

• Engines

• Differentials

• Hose Kits For

• Hydraulic Cylinders • Hydraulic Pumps

90" Contour Packer/ Roller. 12 wheel, 90" width. $21,970. Red Deer, AB. phone: (403) 396-1208

All Machines

Read RD90B Screenall.

Diesel self-contained.

Runs good. $25,000 HUGH: (604) 657-7167

WE hAvE A GOOD SElECTiOn Of EqUiPmEnT ThAT hAS bEEn DiSmAnTlED fOR USED PARTS

running moTors

Currently Wrecking on: 980G, 330BLC, 320BLC, 324CLC, 325B For Your Equipment Needs:

Bob Garden: 604-916-4546 Brian Rowsome: 604-219-3194

8.3 5.9 Cummins; 671, 353, 453, 471, 6V53 Detroit Diesel; 466, 414, 4276, 4045 John Deere

For Your Parts (new/used) Needs:

604-855-9977 1-866-456-9977

We purchase machines – let us know what you have!

www.oversizedequipment.com

JUST CAME IN: • Maddill 2200 Buncher Burnt • 160 Kobelco Excavator 2004 Burnt • 200 LC Hitachi • S10 International Skidder • 748GII Skidder • 2005 330 Linkbelt Excavator • 630B Tigercat • 325 Cat Excavator • Link Belt 2800 Quantum 3000 Dewarco • 2005 Cat 545 Skidder • 2007 753 JD Buncher (Burnt) • 748G111 Burnt • 330 Cat Log Loader with Thunderbird Log Loader • 545 Cat skidder, 748GIII, 748GII, 848 JD Skidders • 686 & 740 Champion Grader • 618 Buncher, 525 Cat Skidder • 1995 Freightliner, Series 60 Detroit, 470 Hp, 40,000 Lb 410 Ratio Rockwell Axles, Dbl Lockers • 125 Clarke Wheel Loader • 210 300 Komatsu • 210, 200 Hyundai W/ Harricana Stroker • Crane Ph 20-1A Omega • 644A Jd Loader • 380, 404, 450, 480, 550, 660 TJ Skidders • 330, 320, 325, 322, 225, 235 Cat • Denharco 3000-3500 Strokers • Cat D6C • 2200 Limit Stroker • 630 Prentice Buncher • Hitachi EX200LC • UH14 • 630 Tigercat Grapple Skidder • 518 Cat Skidder • S8, S9 International Skidder • Terex 8231 Loader • Coring Hotsaw 20-22 Head • Link-Belt 4300-2800 • 2800 Quantum • 2628, 608, 618, 628 TJ Bunchers • 848G • 748GIII • 648GII • 748E, 748G, 740A, 649E, 648D, 640D, 540A, 540B, 440 • Graders Austin Western Champion D600-760 • Hitachi 270 • Tires/Chains: 35.5 x 32, 30.5 x 32, 24.5 x 32, 23.1 x 26 • 18.4 x 34, 26 x 28 • 18.00 x 25 • 14.00 x 24, 16.00 x 24, 20.5 x 25 • Tracks for 618, 628, D6, D7, 200

2007 JCB Vibromax, model VM132PD, 84" padfoot, 2,770 hrs. $65,000 OBO. Smithers, BC. jim: (250) 287-1214

BM&M 3’ x 8’ two deck screen. Very low hours.

Spare screens. $25,000 HUGH: (604) 657-7167

Visit www.SkidderbuncherParts.com For More Info & Photos! * VISA & MASTERCARD ACCEPTED *

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

SILOS

2016 SLG-108FVRB DeSite Portable Vibratory Screening Machine.

Screen Topsoil, Compost, Sand, Gravel, Compost with your Skidsteer, Backhoe, Excavator, Loaders. Produces 30 to 60 yards/hour. Only $14,400. Abbotsford, BC. Phone: (604) 776-1129

2015 Screener SLG-78VFII DeSite Portable Vibratory Screening Machine.

Screen Topsoil, Compost, Sand, Gravel, Sand Designed for Skidsteers, Excavators, Tractors.

Produces 20 to 40 yards/ hour. Only $6,700.

Abbotsford, BC. Phone: (604) 776-1129

Page 59

tanks

1992 Tremcar double walled stainless steel tank.

Suitable for drinking water. $20,000 or best offer.

Edmonton area, AB. phone: (780) 964-4547 New Steering Tires.

McCloskey Trommel Large Trommel Screener 425/65R22.5 $450/ea. tires South Surrey, BC. 40' x 8' drum, feeder, die- screening plant, MCB 7 x al: (604) 813-5500 sel engine over hydraulic 24 RE. Very good condiCan’t find what you are looking for? Thousands of power. Designed for pertion. Includes inventory of more machines and equipmanent Location. $85,000.

4 Brand new silos, 7’ diamment for sale on: 10 screens. eter, painted, 12’ long, 4’ Rod: (604) 856-6500 www.supplypost.com cone. phone: (403) 606-6395 Dan: (604) 313-7424 trailers steve - aggtech phone: (604) 857-3107 1990 3 axle transfer trailer. $10,000. 2000 isan ntErprisEs skidders Transfer Box, $15,000. ltd. kelowna, bc Lease or Financing Available Langley, BC John Deere 440 Skidder 2010 Tires: 2 Bridgestone Phone: (604) 781-6282 devon 250-215-2352 cell w/Backhoe Attachment X 35 65 r 33 Loader tires Mike 250-717-6077 cell and Snowplow Blade. 70 -80 % 3 Michelins at transmissions $6,000 O.B.O. Burns Lake, 40% to fit Cat 988, Volvo Bulldozers 5960 Allison transmis1977 Caterpillar D8K, 60% U/C, Cab, Ripper, Angle Dozer, BC. L330, WA 600, size load- sions. 3 available. $1,000/ Good Old Cat. ...............................................................$44,500 phone: (250) 694-3459 er.No repairs - few scuffs. each. Powell River, BC excavators $3,000 - $4,500. Trail, BC. daren.k.brown@gmail.com 2003 Hitachi Zaxis 200, 6406 Original Hours, 50% U/C, Q/C, John Deere 2002 748GIII m m c c o n n a c h i e @ k e s Phone: (604) 483-8023 28" Pads, Dig & C/U Bucket. ....... Was: $62,500 NOW $58,500 Grapple Skidder. 14,000 group.net 2006 Caterpillar 312CL, 6867 Hours, 80% U/C, 24", 36", 60" hrs. Engine/Transmission Phone: (250) 368-7044 trommels C/U Buckets, Hyd Q/C, A/C, 24" Pads. . .........................$68,500 1979 Caterpillar 235C, Guarding, Catwalks, Thumb, 2 Buckets, redone. New hydraulic Can’t find what you are 32” x 20’ TROMMEL. Feed Hyd. Thumb, Good U/C. ................. Was $52,500 NOW $42,500 pump. New diff. pump. looking for? Thousands of hopper, Grizzly separator, loaders Well maintained. $55,000 more machines and equip- sluices, trailer mounted.

Coming In: Caterpillar 950F, Bucket Machine, Good Solid O.B.O. Burns Lake, BC. ment for sale on: $15,000. Quesnel, BC Loader. ........................................................... Call For Details!

Phone: (250) 992-3010 www.supplypost.com phone: (250) 694-3459 1991 Caterpillar 926E, 75% Rubber, Tight Pins & Bushings, Hyd. Q/A, Bucket & Forks. ............ Was $37,500 NOW $32,500 2002 Bobcat S220, Clam Bucket, High Flow, 80% Rubber ........ ...................................................... Was $19,500 NOW $17,500

equipment for sale dozer: CAT d8K c/w cab, angle dozer, Burrell Ripper ... ........................................................$28,000 forKlifTs:

M

EQUIPMENT FOR SALE 2016 Tigercat 870C Feller Buncher, 28” Shoes, Proheat, 676 Hours......................................$510,000.

CAT 938G side shift, fork p. 20 x 25 tires ........ ........................................................$29,000

2015 Tigercat 630E Skidder, 35.5 Tires with Chains, Proheat, 1200 Hours....................................$320,000.

CAT 928G side shift, fork p. 20.5 x 25 tires..... ........................................................$27,000

2015 Komatsu 210-10 Processor, Waratah 622C, Proheat, 1500 Hours....................................$460,000.

CrANes: Grove rT-620 20 Ton Detroit Power .............. ........................................................$25,000

2012 Deere 903K Feller Buncher, New Undercarriage, 5000 Hour Engine, Total Hrs; 11,000 ...........$162,500.

Grove rT-655 35 Ton Detroit Power............... ........................................................$12,500

New Olofsfors Floatation Tracks for Forwarders .....POR

Grove rT-620 20 Ton Cat Power Dual Winches ........................................................$25,000

2007 Hyundai 290LC, QC, 2 buckets, thumb, 3000 hours ............................................................. $99,000.

Grove rT-760 60 Ton Cummins Power Dual Winches ...........................................$55,000 Grove AT-309 9 Ton Cummins Power Carry Deck ..................................................$9,000 BrodersoN iC-200 8 Ton Carry Deck Propane ..........................................................$9,000 KoBelCo MiNi CrAwler, 2 Ton ......$12,000 TANKs: 10,000 GAl. ProPANe TANK, Skid Mounted .. ........................................................$10,000 wreCKiNG for PArTs: CAT 938G forKlifT no mast................ P.o.r CAT 928G forKlifT no mast................ P.o.r

CAll frANK: 250-997-7455 fawahl@telus.net

2007 Hyundai 320LC, QC, 2 buckets, thumb, catwalks, 3000 hours..................................................$103,500.

2002 Madill 2200B Feller Buncher, High Rotation Sawhead, Ready to work ................................ $86,500.

1999 Cat D6R LGP, cab, A/C, angle blade, tilts, ripper, 80% U/C........................................................ $95,000.

1997 Link Belt 3400 / Limmit 2000B delimber ...................................................................... $35,000.

NEW AMI Quick Coupler c/w blank hooks for Hyundai HL730 ............................................................. $2,715.

TRUE NORTH EQUIPMENT INC.

1-780-722-8129 · www.truenorthequipment.ca

E

screeNers 2006 Thomas Pro Tough 400 Screener, Single Product, 475 Hrs, 8x6 Screen, Diesel Powered, Handle 2 Yard Loader, Extra Screens, Extra Conveyor ................ Was $28,500 NOW $26,500 Graders 2006 Caterpillar 140H, VHP, 5518 Hrs, 70% Rubber, Craig Snow Wing, Low Pro Cab, Chains, Clean, Very Tight. ...... Pending Sale Coming In: Caterpillar 14G, Low Pro Cab, Big Rubber, Very Nice. ................................................................Call For Details!

PacKers 2006 Caterpillar CS-323C, 50" Smooth Drum, 1506 Hrs, Canopy. ......................................... Was $29,550 NOW $27,500 trucKs 1992 Chevrolet Topkick, Cab and Chassis, 3208 Cat, 5 Speed, Long Wheel Base. .............................. Was $3,850 NOW $2,850 2009 Western Star, 4900FA, 32” Sleeper, DD515 530 hp, 18 Speed. 845,000 km, 15824 Hrs, Wet Kit, Lowbed Ramps, 236” Wheelbase, 80% Rear Tires, New Steer Tires, Lockers, 12 frt 46 rears, Alum Headache Rack. .................................. $57,500 2014 Ford F350 4x4, 16,000 Km, Short Box Lariat Crew Cab, Diesel, Loaded, Leather, Sun Roof, Red & Gold, Personal Driver, Not Work Truck. ........................................................... $64,500 1999 Dodge 3/4 4x4, Long Box, Ext Cab, 131 Kms, A/C, Cruise, Tilt, P/W, PDL, Stereo, Good Rubber, Good Looking. .....$75,000 trailers 2000 Goertzen 18' Flatdeck Equipment Trailer, 10,000 lb GVW, Great Decking, Clean and Straight. ..... Was $3,250 NOW $2,750 1981 Eston Tri Axle Lowbed, Good Rubber, 8'x22' Deck, New Certification. ................................. Was $12,500 NOW $10,500 1986 Clemens 24' End Dump, Quarter Frame, Tub Style, Liner, Tarp, 80% Rubber, Certified. Was $22,500 NOW $19,500 attacHMeNts Bradco Trencher 617T Skid Steer Mount. .............................. .......................................................... Was $2,750 NOW $1,750 ALLtech CP20A Pavement Grinder Skid Steer Mount. ........... .......................................................... Was $4,750 NOW $2,750 60", 3 Point Hitch, Broom, $6,600 New. Like New Cond. ........ .......................................................... Was $3,750 NOW $2,750

misan@shaw.ca

Page 60

Supply Post Western Canada Edition · supplypost.com

trucks (Art.)

trucks (Off Hwy)

trucks (Sleeper)

wrecking

April 2016

yarders

Can’t find what you are looking for? Thousands of more machines and equipment for sale on: www.supplypost.com

2008 Caterpillar 740, 3 units available, good rubber, lined heated box, ready to work. 9,000 hours, Serial # B1P02864. $175,000. Surrey, BC. phone: (604) 897-1396

trucks (Dump)

Wrecking L320 in excellent shape - excellent Cummins 1980 Foremost Delta 3, 22' KTA, trans, and diffs, deck, 30 ton winch, good 2004 Aerocab 12 ‘ Sleeper pumps. New, good tires, rubber, ready to work. Truck, Custom made by excellent bucket. Trail, BC. mmcconnachie@kes$110,000. 3 units avail- Kenworth. Includes couch group.net able. Surrey, BC. and double bed. Ready for Phone: (250) 368-7044 phone: (604) 897-1396

1980 Kenworth Dump Truck. Rebuilt tranny, motor & rear end.

Aluminum box transfer. ½” floor. 1980 Pup Trailer.

New brakes, new MVI. Both together for $30,000. 1978 Foremost CommanLangley, BC der, 40' deck, 50 ton winch, Phone: (604) 781-6282 ready to work. $179,000.

you to ride in pride!$30,000 OBO. Kitchener, Ontario.

Sandra2@sympatico.ca phone: (519) 621-9053

wanted

2012 WESTERN STAR TRI-DRIVE TRACTOR. DD16-600 engine, 20918 trans, Meritor diffs.

Houston, BC. Henry: (250) 845-2212

1285 Case Excavator, Wrecking: Cat, JD, Hitachi & Link-Belt equipment. or Drott 45 Excavator, or penner’s heavy duty 1085 Case Excavator (all parts & servicE with rubber tires). Whole, phone: 1-800-663-8210 trucks (Logging) Surrey, BC. Wrecking: Cat, JD, or in parts. Prince George, 1994 WESTERN STAR phone: (604) 897-1396 Kom, Link-Belt.

4964 LOGGING TRUCK. BC Wrecking: Cat, JD, Hitachi N14 Cummins Engine – trucks (Rock) PHONE: (250) 640-4334 & Link-Belt .

18 Speed - 46,000 lb. air lockers C/W 1989 Peerless VOLVO BM-861 ROCK Cat 527 Crawler Skidder Oversized Equipment Parts 2463 Townline Road, Tri-Axle. 762,199.3 km. TRUCK. A-1 condition.

(1997 to 2013) or used Abbotsford, BC $32,000. Campbell River, $14,500. Quesnel, BC D5H-TSK wanted. phone: (866) 456-9977 BC Phone: (250) 992-3010 phone: (208) 343-3621 Phone: (250) 286-3057 or: (604) 855-9977

COASTAL PACIFIC EQUIPMENT copac@cpecanada.com | www.cpecanada.com

1-800-811-6911 • (250) 392-7755 685 South Mackenzie Avenue, Williams Lake, B.C. V2G 1E2

1976 (Trojan) Timberjack 2000 Wheel Loader, w/ grapple, bucket, snow blade ................................ $15,000 1995 Komatsu PC250 Excavator, w/2 bkts, thb . $28,000 1974 Dresser 100E Track Loader, w/4-1 bkt, backhoe attachment................................................................ CALL “NEW” TD25C-E-G Track Group ............................. CALL 1977 Dresser TD7E 70 hp, with 6 way & ripper . $24,000 1978 Dresser TD15C angle blade and root rake . $19,500 1988 Dresser TD20G LT winch or ripper ..........$65,000 1987 Dresser TD20G cab, ripper, angle blade ....$65,000 2001 Dressta TD20H w/angle, full or semi-U blade....CALL 2011 Dressta TD20M w/angle blade & ripper, 1,433 hrs. ................................................................................CALL 1977 Dresser TD25C angle blade, ripper or winch .. $21,000 1983 Dresser TD25E w/angle blade, ripper, encl. cab. .CALL 1980 Terex TS-18A scraper good rubber .........$19,500 1997 & 1999 TJ950 Buncher (1997 parts unit) make an offer for both. .................................................. OFFERS! Allu Grinding Bucket with Q/C, 60 hrs..............$19,500

Miscellaneous For Sale CuRRENT MACHiNES DiSMANTLED

IH • DRESSER • DRESSTA • TD9 • TD15B • TD15C TD15C-20-E-G ClEARInG RAkES • TD15E • TD20B • TD20C TD20E • TD20G • TD25C • TD25E • 175A • 250C HOUGH 515 • 530 • H65 • H80B • H90E • H100 ClARk 666 & 667 • JD540A & B • JD640 • 648D • 648E kOMATSU D65-6 • 950F CAT BUCkET TD20E-G FUll U-BlADE 6 • TD25E-G FUll U-BlADE (2) 20.5 X 25 TIRES l5 6 • (4) 1400R25 TIRES JD 850C11 HAnG On RAkE

New & used IH dresser parts

1987 Cypress 7280B. Recond. Chemainus, BC. kaelyn@islandpacific logging.com Phone: (250) 732-7097

BROWN INTERNATIONAL SERVICES NEW PArts for iHC - Dresser - in stock, including Exchange transmissions, steering Drives & Drop-in Motors, Carco Gearmatic Winch Products FUll trACK PrEss FACilitiEs Complete Excavator & Crawler tractor Undercarriages Berco, trek & intertractor

MACHiNEs For sAlE

• TD15B, Powershift winch, bush guarded ..............$17,500 • Dresser TD8G, 90% U/C, Carco 30 winch ............$35,000 · Cat D7 17A, c/w new U/C, winch & bush blade...$15,000 · IHC H80B, runs well, c/w bucket ............................. P.O.R. · John Deere 544B Loader, grapple and bucket.....$15,000 · Cat D8K Beales brush rake .................................... $6,900 • TD20E Beales brush blade ..................................... $4,800 • TD15C Beales brush blade..................................... $4,000 • TD15C Winch, Carco F50 ....................................... $3,500 • TD20G-20E Grapple .............................. Reduced $12,000 • DT360 Power Plant with Rock Ford PTO ................. $3,800 • Used Carco 30B Winch for Dresser TD8G & TD9H.. $7,500 • 817B Engine .......................................................... $7,500 • JD CWS Grapple 644H, Exc. cond. ......................... $3,200 • Used TD25 Rails & 22" pads ................................. $6,000 • TD7C/8E & G Track Assemblies ............................In Stock · TD9H Rails, new ....................................................... P.O.R. • Assorted ripper shanks............................................. P.O.R. • Cat D46U Engine Core ........................................... $1,000 Wrecking: Komatsu D85E-18, good undercarriage

Large Inventory Of New & Used International & Dresser Parts & All Brands of Undercarriage

“We Service What We Sell” Ph: (250) 546-6518 • Fax: (250) 546-3100 www.brownihc.com |E-Mail: info@brownihc.com 4274, Box 557 Hwy 97A North, Armstrong, B.C. V0E 1B0

Pierce PSY 200 Yarder, Detroit V12 in upper and Detroit V8 in carrier. New insulation and full glass in cab. All noticeable leaks in pump, motors, hoses, and 1993 Madill 171 Yarder Upgraded hyd. system, JD 992 UC Serial # 17128. Service records and pics. available. Very nice, well maintained machine. $700,000. USD. Montesano, WA. Mike: (360) 470-8111

cylinders repaired. New

Can’t find what you are looking for? Thousands of more machines and equipment for sale on: www.supplypost.com

in the classifieds! Call

tires. New batteries. Metal straightened where needed. New paint. S/N 10508. $225,000 US. Eugene, OR. phone: (541) 747-5517 Advertise your machines Michelle for deadline and rates.

PHONE: 1-800-663-4802

MONTHLY SPECIAL 2003 744 John Deere Wheel loaDer, neW trans., neW tires, reaDy to go to Work in the DrylanD sort .........................$98,500

INvENTOrY:

• Set of chains for 14 G grader 1400X24 .............. $1,500 • Pacific P16 fat truck V12 18sp #90000 ............ SOLD • 2006 VOLVO 460 exc 7400 orig hrs ............... $170,000 • 2005 AZTEC screening plant mod FNG 2512K ... $102,500 • 2003 VOLVO L180E 6400 hrs ....................... $159,500 • 2001 F450 Service truck, crane, welder, compressor..POR • 2008 John Deere 772D, 2,600 original hours, snow wing, chains ................................................. $232,500 • #12000 lb RAMMER lb breaker .....................$42,000 • #10000 lb RAMMER lb breaker .....................$32,000 • Champion 760 Grader ................................. $12,500 • Grizzley Behind Cab Loader ...........................$8,500 • 2007 Kenworth T800 Tri Drive 60 Ton Sleeper Boom Truck, removable deck. .....................................$250,000 • 2006 Hitachi 450 LC Roadbuilder w/2 bkts, thumb, 2 available ............................................$119,000 • 1980 Knight Tandem Tippy Trailer .................. SOLD • Moxy MT30 Articulated Truck ....................... $37,000

NEwLY LISTEd: • Traxxon Tank Drill 671 GM VR 140 Hammer 750 CFM .. POR • 1971 Case 450 Crawler Loader ........................ $10,000

*fINANCINg AvAILAbLE*

www.rOYquIP.COM

250-203-0134 fOr MOrE INfO

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Governments Invest In Expansion Of Locally-Owned Poultry Processing Facility The governments of Canada and Manitoba will support the expansion of a producer-owned poultry processing company in Blumenort with $2.5 million in funding, Dr Doug Eyolfson, Member of Parliament on behalf of Federal Agriculture Minister Lawrence MacAulay and Manitoba Agriculture, Food, and Rural, Development Minister Kostyshyn recently announced.

Granny’s Poultry distributes fresh and frozen Manitoba chicken and turkey across the country, and is one of the largest food processors in the province. The company is implementing a $37 million plant expansion and renovation, which will

?

allow them to grow their business and purchase new equipment for processing, chilling, packaging and grading poultry, and improving production efficiency.

Minister Kostyshyn noted this investment also supports the Manitoba government’s goal of creating a $5.5 billion annual food processing industry by 2022, which is currently valued at $4.95 billion.

Granny’s Poultry currently represents 188 producer-member owners who supply the company with hatching eggs, chickens and turkeys. The company is the sole processor of turkeys in the province and employs approxi-

mately 500 Manitobans, supporting the livelihood of poultry producers, breeders and hatcheries.

The expanded facility will provide an opportunity for up to 148 employees to upgrade their skills over the next two years through new training.

Jobs and the Economy will further assist the $37 million plant upgrading through the provision of a secured, repayable Manitoba Industrial Opportunities Program (MIOP) term loan of $2.5 million.

The MIOP program provides term loans to assist expanding businesses in Manitoba.

The federal and provincial governments are investing $176 million of

Can’t find what you’re looking for?

We have many more listings on our website!

www.supplypost.com

FOR SALE MISC. CHAIN BLOCKS, Come-a-longs and turfers from 1 Ton to 3 Ton ..................................................................P.O.R. PORT A POWER RAMS. From 30 T to 125 T, complete with pumps ...................................................P.O.R. 2 - LINCOLN 600 AMP, AC Welders, 240/480, 3 phase ....... ........................................................ $1,500, Or Two For $2,500 LINCOLN WELDER, 400 amp, with Perkins Diesel ... $3,000 VIB PACKERS, 2000 lb. & 1500 lb. (Serviced) ... $3,000 each 2009 ALLMAND LIGHT PLANT, NL8, 8 Kw ............... $ 3,750 1988 GREAT DANE, 53` TANDEM DRY VAN .............. $4,250 1998 GREAT DANE, 53` tridem flat deck, certified .. $4,750 B-TRAIN, 2003 DOEPKER, flat deck, B.C. certified .. $8,500 WHISPER WATT 25 KW, Diesel Generator Set ........ $8,500 WHISPER WATT 70 KW, Diesel Generator Set ..... $10,500 2009 F-350, CREW CAB, 4X4,with flat deck, 351 gas engine, auto transmission, 115,000 kl................................... $11,500 KATO 125 KW GENERATOR SET, with Cat 3306 diesel in container. Complete with switching ........................ $12,500 NEW CUMMINS QSB INDUSTRIAL 6.7 MOTOR. In crate.

Complete with starter & altenator ........................... $13,000 35 FOOT ALUMINUM CREW BOAT, Or Tender Cat 3208, 210 hp. Phone for pictures ................................$19,500 OBO TEREX 72- 31B LOADER. New paint. Work ready .. $27,500 AMERICAN 5765 LOG LOADER. Work ready .......... $37,500 2009 - 966 H, c/w BUCKET / FORKS / Q.C .............. $110,000

~HOPE MECHANICAL SERVICES~ Phone, Text or Email easyhope@yahoo.com

Glen at 604-795-6827, Ray at 604-860-3000

cost-shared programming in Manitoba under Growing Forward 2, a five-year, federal-provincial-territorial policy framework to advance the agriculture industry, helping producers and processors become more innovative and competitive in world markets.

The Growing Value program provides financial assistance to existing agri-businesses that need to make changes to adapt to market forces and environmental considerations, to increase their ability to compete in domestic and international markets.

Quotes “The Government of Canada is pleased to support the growth of Manitoba’s agriculture industry. This investment will create new opportunities for poultry producers and processors to expand their markets and help grow the economy.” — Member of Parliament, Dr Doug Eyolfson on behalf of Federal Agriculture Minister Lawrence MacAulay “This investment will go a long way to grow food processing and the poultry sector here in Manitoba. Strategic in-

PRINCE GEORGE

TRUCK & EQUIPMENT

250-561-1234 - www.pgtruck.com

1-800-946-9400

EQUIPMENT

• 1993 Ford 9030 w/Seppi Forest Mulcher ...................$54,900.

• 2000 Hyundai 210 LC-3 H/W with IMAC power clam .......POR. • 793 John Deere Buncher .............................................$18,500.

• D600 Champion Grader w/ Snow Wing ......................$15,500.

• 3412 Cat GenSet 906KVA ..................................................POR. • 748E John Deere Grapple Skidder.....................................POR. • 219 Cat Buncher .........................................................$11,500.

• TD20G & TD20E Dressers, w/winch and ripper ................POR. • 2000 Timberjack 4x4 20K lb Forklift ........................... $18,000.

• 450A Timberjack Line Skidder ....................................$16,500.

• 1988 Komatsu 220LC Stroker .....................................$16,500.

• 667C Grapple/Line Skidder ...............................................POR. • Onan 18kW GenSet, 1 or 3 ph., w/trailer ...........................$7,500.

• Volvo 125 KVA Genset, 120/208/460V..........................$9,500.

• Model 5000-21 Superlift Str. Boom Crane ...........................$4,950.

• Rotobec Grapple, off Hitachi 200 ......................................POR.

TRUCKS & TRAILERS

• 1995 Tremcar Potable Water Tanker, Tridem ...................por.

• 1989 Decap Tridem Belly Dump.................................. $18,500.

• 2015 Arnes Tridem End Dump ..........................................POR. • 2002 IHC 9900i, S60, 18B, RT145 .................................$24,500 • 2014 BWS Ez-2-Load Hiboy 53' Tridem .............................POR. • 2006 IHC 9200 Crude/Water Tank Truck...........................POR. • 2004 Freightliner Tractor ..................................................POR. • 2012 IHC Prostar Autoshift Tractor ...................................POR. • 2008 Ford F450 Quad Cab, 4x4, loaded............................POR. • 2011 Lode King Stepdeck ............................................$34,900.

• 1997 Tycrop 53 ft. Walking Floor ......................................POR. • 1994 Peterbilt 377, N14, 18, 46 ........................................POR. • 1991 GMC Topkick Serv Fuel Truck, crane .................$12,900.

• 2005 48’ Great Dane Tandem, Dry Van w/tailgate ...........POR. • 2005 Westec Vac Tank ......................................................POR. • 1990 ParPac Tri-Axle .........................................................POR. • 1990 KW T800, Cummins, 5th wheel ..........................$16,500.

• 1985 Mack R688 Tandem, E6350..................................$9,500.

• 1981 Ford, 20’ box, p/tailgate, Allison tr .........................$4,950.

• 1980 Lincoln S/Drop Lowbed, 8’ ...................................$9,500.

• 1988 Totem Tri-Axle ......................................................$7,500.

• 1989 Hino & 1995 Topkick 24’ Van, P/Tail ........................POR. • S/A & Tandem Axle Jeeps .................................................POR.

wRECKING

• 2200 Madill • 748G Skidder • G67 Grapple • TD20E • Cat D5B • Cat 219 Buncher • Timberjack 450A & 520 Grapple Skidder • Hitachi EX200-5 • 230 & 404 Timberjack Line Skidder • Clark 668B Line Skidder • Clark 125B Loader • John Deere 693D • Treefarmer C7 & C8 Line Skidders • 82-40 Terex • TS24 • Warner & Swasey Grad-All 300 Hydro Cruiser • Komatsu 220LC • Good selection of Detroit Diesel, Allison, Clark, Twin Disc, Cat, Cummins and Perkins engine and trans. parts.

Page 61

vestments provide good jobs, and position local companies for long-term success.” — Manitoba Agriculture, Food and Rural Development Minister Ron Kostyshyn “This investment ensures our farmer-owners have a viable processor to buy their production long term. It also demonstrates the commitment that our farmer-owners have to the Manitoba poultry industry and to providing quality poultry products to consumers across Canada.”

— Chairman for Granny’s Poultry, Barclay Uruski “The expansion and upgrading of our processing facilities will keep Granny’s growing and competitive for years to come. Investing in stateof-the-art equipment will improve production efficiencies and help us develop new market opportunities for Manitoba poultry.” — Chief Executive Officer for Granny’s Poultry, Craig Evans b Source: Gov’t of Canada

NEXT AD DEADLINE: April 22, 2016 To book your spot, Call Michelle Today!

1-800-663-4802 Alberta

ENGINE & PARTS LTD.

Ph: 403-720-3494 Mark Cell: 403-519-7254 mark@albertaengine.com

1-800-361-7333 cat • 3116 New Surplus .........................................$10,900 • 3116 Used .......................................................$6,900 • 3126 IT28 Loader ............................................$7,500 • 3126 210 hp ....................................... $4,200-$4,900 • Isuzu 4HK1TC 190 hp .....................................$5,900 cUmminS • QSB6.7 Power Unit New Surplus ..................$14,900 • 6CTA8.3 Rebuilt CPL1262 .............................$12,900 • 4BT3.9 RB Long Block CPL2109, 594.............$5,900 • 4BTA3.9 RB .....................................................$7,995 • 6BTA 5.9 RB CPL 1551 ...................................$9,800 • 6BTA5.9 Ind Complete Rebuilt ......................$12,900 • 6CTA8.3 RB Long Block ..................................$9,700 • 6CTA8.3 Cummins RB CPL 893 ....................$12,900 • ISB 5.9 04-07 Dodge .......................................$6,400 • ISM..................................................................$9,500 detroit • 4-71, 1,200 hrs, Used .....................................$2,500 • 8V92TA Low Hour Rebuilt ...............................$7,900 • 6V92TA........................Prices from $1,500 to $7,500 • 6V92TA DDEC Surplus RB ............................$12,900 • 6V53 ................................................................$1,200 • 6V71TA Industrial ............................................$2,900 • 50 Series Nat Gas ............................................$2,500 engine inFrame KitS • C15 ..................................................................$3,995 • 60 Series .........................................................$2,995 • N14 ..................................................................$2,895 • ISC...................................................................$3,250 • ISX...................................................................$4,300 checK oUt oUr webSite For more detailS

1-800-361-7333 · Mark Cell: 403-519-7254 64166-426 Ave E Aldersyde, AB T0l 0A0

www.albertaengine.com

Page 62

Supply Post Western Canada Edition · supplypost.com

April 2016

DIDN‘T FIND WHAT YOU NEED? SupplyPost.com is optimized for quick load times on tablets and mobile phones!

Find THOUSANDS of listings online at www.supplypost.com

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 63

IMAGINE WHAT’S NEXT. Get the ultimate view of where construction is going.

Go hands-on with the new technologies spread out over 2,400,000 square feet of exhibition space. Learn next-gen techniques, tools and ideas from over 100 education sessions. From earthshaking big iron to groundbreaking innovations, CONEXPO-CON/AGG 2017 is where over 130,000 construction industry professionals from around the world go to stay ahead of their competition.

To see who’s included in our 2,400+ exhibitors, visit conexpoconagg.com

IF IT’S NEW, IT’S HERE.

March 7-11, 2017 | Las Vegas Convention Center | Las Vegas, USA

Co-located with ®

Page 64

Supply Post Western Canada Edition · supplypost.com

April 2016

SAVE THE DATE! JUNE 22 | EDMONTON, ALBERTA JOIN IRONPLANET® AND CAT AUCTION SERVICES FOR OUR NEXT UNRESERVED PUBLIC AUCTION IN CANADA HOSTED BY

CONSIGN EQUIPMENT & TRUCKS NOW ALL EQUIPMENT SOLD ONSITE OR VIRTUALLY FROM YOUR LOT For more information visit

IronPlanet.com CONTACT YOUR LOCAL REPRESENTATIVE Managing Director, IronPlanet Canada Sue McGregor: (780) 238-1560 smcgregor@IronPlanet.com

Northern Alberta Chris Huot: (780) 914-5299 chuot@IronPlanet.com

Alberta Gord Mills: (587) 988-5119 gmills@IronPlanet.com

Oil & Gas/Southern Alberta Steve Wicks: (587) 434-7707 swicks@IronPlanet.com

Northwest Alberta Clay Lindsay: (587) 991-9965 clindsay@IronPlanet.com

British Columbia Rob Dickson: (778) 847-7957 rdickson@IronPlanet.com

Buy with confidence! Look for the IronClad Assurance® logo for inspected and guaranteed items.

California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. © 1999-2016 IronPlanet, Inc. All Rights Reserved. IronPlanet® and IronClad Assurance® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.

YOUR TRUCK & TRAILER CONNECTION, SINCE 1971

EXPERIENCE MATTERS!

SECTION 3

WWW.TRUCKPOST.CA APRIL 2016 · PAGE 65

TWO LOCATIONS TO SERVE YOU!

Ed Murray: 250-812-2925 Garry Shelton: 250-715-5088 Dave Polack: 250-213-2755 Pat McConnell: 250-380-8838

Victoria: 2005 Keating Cross Road

Toll Free: 1-888-652-9139 Duncan: 3111 Cowichan Valley Hwy.

Toll Free: 1-866-746-1515

WE HAVE LOG TRUCKS!

2016 WESTERN STAR 4900SB Tridrive with Pro Fab Quad

2016 FREIGHTLINER 122SD, DD16 - 600HP, 18 spd trans, 20,000# front, 46,000# rears w/ locks, 34” mid roof sleeper.

Great Heavy Haul or Lowbed Tractor!

2016• WESTERN STAR 4900SB TRIDRIVE ProPro Fab Tridem Trailer 2016 Western Star 4900SB Tridrive w/ with Fab QuadPole Logger

2016 FREIGHTLINER M2-106 EXT CAB SERVICE TRUCK 4x4, Cummins 350HP, Allison, Brutus 14' Hybrid Service Body, VMAC Predator 60 Cobra 12,000# crane Ready to go!

2017 FREIGHTLINER 114 SD GRAVEL TRUCKS DD13 - 470 HP, 18 speed trans, 20,000# front, 46,000# rears, c/w Nahanni Light Steel box and pony kit rig up. 2 TRUCKS AVAILABLE

TK40LP TAG TRAILER SPRING SPECIAL

SIMPLY THE BEST

2015 FUSO FE160 Landscape Special - 9' dump box, tool box, ready to work. Mitsubishi 4P10 with 295lb-ft of torque.

2016 DOEPKER IMPACT END DUMP, full frame tridem end dump, aluminum wheels.

ADVANTAGE PLUS 55 TON LOWBED hydraulic detach neck, 10' wide, with or without beavertails. IN STOCK FOR SPRING

2 IN STOCK

CLEAN, USED

2012 FREIGHTLINER CASCADIA, DD15-560HP, 18 speed, 46,000 rears, 60” XT sleeper, 700,000 kms, warranty remaining, great B train spec!

TK 50LP TAG TRAILERS, Tridem axles, tilt and tag style trailers available for Spring Delivery

2015 DOEPKER 53’ DROPDECK Includes tarp box and 2 pipe bunks.

Call for Details.

www.prtruckcentre.com

TRAILERS

Page 66

Our Readers are Your Buyers Supply Post Western Canada Edition · supplypost.com

— Everywhere!

The easy-to-use Supply Post Digital Edition is FREE! Read Supply Post Digital Edition from your desktop, laptop, tablet, or smartphone Great, industry-related articles Supply Post Digital Edition is in the hands of your buyers — on the job, at the work site, in the office — wherever they are Global readership means the largest reach possible for your products and services Check it out at supplypost.com/digital

Supply Post Digital Edition is optimized for all platforms

supplypost.com/digital

April 2016

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Don Hummer Knows Trucks: Test Drives Kenworth T680 For A Month Prior To Large Order Don Hummer has a simple philosophy. “I would never ask a driver to do something that I wouldn’t do myself.” And, for Hummer, founder and chairman of Oxford, Iowa - based Don Hummer Trucking, that includes putting his drivers behind the wheel of a truck he hasn’t personally driven and approved.

His latest “stamp of approval” is on the Kenworth T680, after he drove one for 30 days.

With 215 company trucks and 85 independent contractors, the truckload carrier provides primarily dry van service for customers in a variety of industries, with a heavy focus on packaged foods and food ingredients, office furniture and building products. Hummer said he’s always been hands-on – leaving the office several times a year, on long-distance trips delivering freight.

Staying in tune with drivers and customers keeps him grounded, he said. “Our customers don’t even know it’s

t

View our online inventory on your mobile device

me when I’m out there making deliveries. The purpose is to stay connected with the business and drive the same routes, with the same equipment as our drivers.

I’m one of them.” Last July, Hummer and his son Chris, president of the company, visited with MHC Kenworth, which had just expanded its territory into Iowa. According to Chris, the Hummers liked what they saw in the T680 and decided to rent a truck from PacLease for one month, in order to gauge comfort and performance.

“I’ve driven a lot of trucks over my lifetime,” said Don, who started his career driving a Kenworth cabover for his father, before starting his own company in 1982. “The T680 is the most driver-friendly truck I’ve ever driven. I was astonished with the truck when I drove it for a month. And I still am. It is so quiet, and the interior and exterior fit-and-finish is just exceptional. When I was done driving the truck,

it was the first time in my career where I wasn’t thinking to myself, ‘I wish this was there, or this was positioned here.’ This Kenworth was cut right.”

According to Chris, the company was so sold on the T680 that the company ordered 75 units with the 76-inch sleeper. The trucks, purchased through MHC Kenworth – Cedar Rapids, are powered with the PACCAR MX-13 engine rated at 455 hp, and use primarily Eaton Fuller Advantage Series 10- speed automated transmissions.

“That was the largest single order we’ve made in the last 10 years. We really felt good about how drivers would react,” Chris said.

“And reaction was even better than we expected.

When we brought in new trucks in the past, we always have had drivers who would say, ‘No thanks, I’m happy with the truck I’m in.’ This was the first time where every driver who was offered the new truck

took the keys. Each driver wanted the T680 – not one wanted to stay with the truck they were driving.”

With a solid base of quality drivers, and an experienced support staff in all departments including Don’s son Andrew managing Customer Service, Don Hummer Trucking, has doubled in size over the last five years. The company’s tagline is Delivering Value, which Chris said “conveys that customers should expect the best overall value when partnering with Don Hummer Trucking. Safety is never compromised and the company consistently ranks at the top of our customers service expectations for truckload carriers.”

“We plan to continue with expansion where it makes sense, and an essential component to any growth is our ability to attract and retain quality professional truck drivers,” continued Chris. “We’re well below the industry average in driver turnover.

We pay well and have always offered nice equipment. Running a premium truck like the Kenworth T680 shows drivers that we are serious about providing them with comfortable,

Page 67

safe and efficient equipment to do their job. There is no shortage of positive comments on the trucks from the quietness, to the layout in the sleeper with the rotating table, to all the room for storage. We want to be the carrier of choice for our customers and professional drivers, so it only makes sense to offer the best equipment available.”

Chris also said the Kenworth T680 is driving home bottom-line results. “Fuel economy is the best we’ve ever seen with brand new trucks, and compared to other aerodynamic trucks we’ve bought in years past, we’ve seen a 4 percent bump* with the T680.

That’s big. We see it as a combination of the T680’s aerodynamics and the fuel efficiency of the PACCAR MX-13 engine.”

According Chris, reliability and a reduction in downtime is also critical to success for the company.

“It’s another reason we went with the MX-13. We wanted an integrated drivetrain and wanted any issues with the truck or engine to be handled through a single source, eliminating the need to manage additional vendor/supplier relation-

ships. And, that’s what we get with MHC Kenworth and its footprint (67 dealerships in 16 states). MHC is a growing entity, just like we are, and they share the same culture and drive to be the best. Our professional drivers and experienced staff deliver value for our customers and MHC and Kenworth deliver value for us.” b Source: Kenworth

We’re hauling asphalt to get you the next issue!

AD DEADLINE: April 22, 2016 5:00 pm

More units available at www.internationalmachinery.com 1-844-460-9954 | Maple Ridge, BC

2012 FREIGHTLINER CORONADO, 560 DD15, 18 SPD, 18 X 69 AXLES, 36" BUNK, 327K MILES, LOADED TRI-DRIVE. $92,500

2011 PETE 367, LAZER 5 COMPT FUEL 2011 KENWORTH T800, 550 ISX, 18 SPD, TANKER, REELS & METERS, TANK 20 X 46 AXLES, 63" BUNK, 420 MILES FRESHLY CERTIFIED, 475 CAT, 18 SPD, LOADED. $96,500 36" UNIBILT, 162K MILES, LOADED FUEL TRUCK. $129,500

2008 STERLING 4X4, 300 ISC, 10 SPD, 13 X 21 AXLES, AUTO CRANE 6006, VANAIR COMPRESSOR, LOADED, 142K MILES. $89,500

2008 WESTERN STAR 4900, 515 S-60. ALLISON AUTO, 16 X 46 AXLES, 48" FLAT TOP, 340K MILES, LOADED. $89,500

2005 KENWORTH T800B, 475 CAT, 18 SPD, 20 X 46 AXLES, 495K MILES, 36" AEROCAB, LOADED. $89,500

2002 KENWORTH C500, 475 SINGLE TURBO CAT, 18 SPD, 20 X 52 AXLES, 42" FLAT TOP, 2 SPD. AUX. TRANS, LOADED. $69,500

2003 WESTERN STAR 4900, 495 SINGLE TURBO CAT, 18 SPD, 20 X 69 AXLES, CUSTOM VAC TANK RIG UP, 179K MILES, LOADED VAC TRUCK. $99,500

Page 68

Supply Post Western Canada Edition · supplypost.com

April 2016

Terex Trucks’ Odyssey To Myanmar

Show Hours | Fri., 12noon - 9pm | Sat. 10am - 5pm Drivers & Operators Invited Attention Visitors: Save $20.00!

Pre-Register online for FREE using Promo Code: TRUCK1069

PLUS… Pre-register by April 15, 2016 and receive a ballot for a chance to

WIN A PRIZE SHOWCASE valued at over $2,500.00!

(Ballots available exclusively to pre-registered visitors; see website for details.)

Don’t Miss These Exciting Features: • Professionally Judged Show & Shine • Safety Driven Educational Seminars • Live Entertainment

It was an epic ten-week journey, covering a staggering 13,000 thousand miles by road, river and sea - but 29 hard-wearing Terex Trucks have arrived at the jade mines of Myanmar to work on one of the most remote and challenging terrains to be found anywhere.

Believed to be the bringer of prosperity and good fortune, Jade is an extremely valuable commodity in Asian cultures, said to be a bridge between heaven and hell. Kachin State in northern Myanmar is home to some of the world’s highest quality deposits, known as jadeite. These are estimated to be worth up to US$31 billion annually, almost half of the country’s GDP, and are shipped overseas for use in jewellery and other products.

Much of the extraction of the jade deposits is done by ‘boulder mining’. This is a process where the overburden material is removed to expose the rocks below, after which the jade-containing rocks are separated, washed and processed to reveal the pockets of precious jade inside.

The extraction process is far from easy. It’s a tough job for robust, reliable equipment. And this is no place for breakdowns. That’s why, when three local mine operators needed additional hauling machines to take on the job of transporting thou-

sands of tonnes of blasted rocks and earth 2 km or more from the mine to the processing plant, they called on Terex Trucks.

In for the long haul The three mining companies - Aung Hein Min Gems Co., Ltd., Yar Za Htar Ne Gems Co.,Ltd., Myanmar Thura Gems Co., Ltd .

– contacted Yangon-based dealer Aung Hein Min Co. Ltd (AHM Heavy) to supply them with 19 Terex Trucks 91 tonne (100 ton) capacity TR100s and 10 Terex Trucks 55 tonne (60 ton) capacity TR60s.

For two of the customers, Terex Trucks had already proved their worth.

Aung Hein Min Gems Co., Ltd had previously ordered six 38 tonne (41.9 ton) capacity TA400 articulated haulers, while Yar Za Htar Ne Gems Co. Ltd. had 20 Terex Trucks TA400 in their fleet. Myanmar Thura Gems Co., Ltd is a new customer.

Choosing the right trucks for the job was the easy part. AHM Heavy, a Terex Trucks dealer since 2013, now had somehow to tackle the challenge of transporting the machines over 13,000 miles from the manufacturing plant in Motherwell, Scotland to the isolated mines of Phakant in Kachin State, northern Myanmar.

What followed was a mammoth expedition by container ship, barge and road that took the trucks a total of two and a half

Peterbilt Introduces New Chassis Routings Featuring a more robust, streamlined design, Peterbilt debuted its new chassis routings for the Models 579 and 567 that improve serviceability. The introduction was made during the Technology & Maintenance Council Annual Meeting in Nashville.

The new chassis routings – which run the length of the truck – organize air, electrical and fuel lines into individual bundles to facilitate quick, efficient identification and servicing of these systems. The rout-

months for the trucks to complete.

Ready, steady, go The first part of the journey, which took five weeks, saw the trucks assembled and packed in Motherwell before being transported 9,000 nautical miles (16,668 km) to Yangon, via Singapore by containership. Once in Yangon the trucks were transferred to three barges, with a maximum of 10 per barge.

“Loading the trucks onto the barges was no easy task,” says AHM Heavy’s Marcus-Zaw Naing Oo. “To avoid sinking the barges and trucks they were loaded in a shuffle sequence to maintain the barge’s balance until all machines were in place.

“Water levels were critical at this point. If the water level is too low, it cannot support the barge and its cargo. Too high and with a fast flowing river, it’s unsafe and we risk the barge and trucks being swept away.”

Once loaded safely the trucks began their journey along the Uyu River to Phakant’s closest port, Kathar. This part of the journey, just under 600 miles (966 km), took a further three weeks.

Once disembarked the final leg of the journey – a mere 120 miles (193km) – took just three days, with the trucks driving to the mine site’s equipment yards in Phakant. But even this part of the journey was difficult.

“The trucks were delivered during Myanmar’s wet season,” says Marcus-Zaw Naing Oo, “so the roads were often flooded and Continued on page 69

new chassis routings on a standalone display in its exhibit at TMC. Peterbilt’s exhibit focused on products and services to help fleets minimize operating costs through improved fuel economy, maximum uptime, increased safety and simplified service. In addition to the optimized chassis routings display, the company showcased its connected truck remote diagnostics technology SmartLINQ, its Rapid Check expedited dealer diagnostics program, the new Bendix Wingman Fusion safety system and two fuel efficient Model 579 EPIQ trucks. b

ings are secured with newly designed frame brackets that hold each bundle separately and provide even greater durability.

“Peterbilt’s new routings are simple and optimized for greater robustness and ease of maintenance,” said Scott Newhouse, Peterbilt Chief Engineer. “We benchmarked leading designs to engineer the best, most modern chassis routings in the industry.”

This new configuration is currently in production.

Peterbilt featured the Soruce: Peterbilt

April 2016 Continued from page 68

very muddy, but thanks to their excellent traction the trucks were able to cope with the conditions and we completed the journey relatively easily.”

Mission accomplished Safely arrived at their

Supply Post Western Canada Edition · Our Readers Are Your Buyers final destination, the machines were then tested and commissioned by AHM Heavy’s Terex Truck trained engineers to the satisfaction of the clients. With this process completed the trucks were then registered

Peterbilt Breaks Ground On Major Plant Expansion

with the Myanmar Government. This new registration scheme takes three to four weeks and is required of all existing and new equipment operated at the country’s mines.

The trucks are now fully

up and running, working almost 24/7, says MarcusZaw Naing Oo, only undergoing scheduled stoppages for planned maintenance and servicing. The new trucks are only operational during Myanmar’s dry season, which runs from

Page 69

roughly November to May. For the remainder of the year, they are stood down.

“The trucks are playing a vital role, transporting blasted rock and earth from the mine to the processing plant,” says Marcus-Zaw Naing Oo. “So far feedback

form the client has been excellent. Our reports showing outstanding availability, productivity and fuel efficiency, with no major faults, or maintenance requirements.” b Source: Terex

Call K-Line for Your Transport Equipment!

Peterbilt Motors Compa- products. This expansion ny recently broke ground ensures Peterbilt’s ability on a 102,000 square-foot to continue to provide cusexpansion to its heavy- tomers with the industry’s duty truck manufacturing top performing, highest facility in Denton, Texas. quality trucks well into the The new building will be future.” The expansion is located just north of the expected to be operational plant and provide addition- in January 2017. al capacity for production Last year Peterbilt beand testing. gan a multi-phase plant im“This expansion is Pe- provement project that interbilt’s largest facility creased receiving capacity investment since the con- on the east side of the plant struction of the Denton and added an expansion to plant and it will make a the west side of the plant. significant impact on our The third phase, which will operational efficiencies,” be completed in October, said Darrin Siver, Peter- creates a new painted parts bilt General Manager and storage and retrieval sysPACCAR Vice President. tem on the second level of “Peterbilt is committed the building. b to ongoing investment in - 58th Camex_SP_Ad_Fuel 260315.qxp_Supply Post Ad 2016-03-11 2:5227360 PM Page 1 its facilities, people and Source: Peterbilt

12-Axle Hydraulic Neck Combination Trailer

Crescent, Langley, BC | www.klinetrailers.com | Call us toll free 1-888-880-5544

View over 2000 new and used quality Trucks and Trailers on-site or on-line at www.camex.com

CAMEX Fuel/Lube Trucks

& Mechanic’s Trucks

Fuel/Lube Combination Walk-In Insulated Van Body w/ Heaters Oil, Grease, Anti-Freeze, Air

Camex Equipment Sales & Rentals Inc. 1511 Sparrow Drive Nisku, Alberta, Canada T9E 8H9

Fuel Trucks 1000 Us Gal - 4400 US Gal Capcity

Lube Trucks

Mechanics Trucks

Walk-In Winterized Van Body

Lifting Crane, Air Compressor, Welder

FINANCING AVAILABLE - QUICK & EASY APPROVALS - OAC

Member Of

Page 70

Supply Post Western Canada Edition · supplypost.com

April 2016

New I-Shift With Crawler Gears Can Start Off From Standstill With 325 Tonnes

19880 96TH Ave, Langley BC • 604-888-2888

TRUCKS FOR SALE R L YEAT! E D O M AROU CLE

$37,995

CALL

2015 INTERNATIONAL LONESTAR ISX15, 550 HP, 18 SPD, 244” WB, 73” HI-RISE, 13.2/SUPER 40 AXLES, LEATHER, LOADED. STAND OUT FROM THE CROWD…

Stk# BN341933

2011 INTERNATIONAL PROSTAR, MF13 475 HP, 13 SPD, 12/40, 73" SKYRISE, CLEAN LOCAL BC TRUCK, 665K KM, FRESH MVI, GPS

CALL

CALL

Stk# GN277472

Stk# GH108025

2016 INTERNATIONAL WORKSTAR, N10 350 HP, 272" WB, 20/40, 6 SPD ALLISON, ALUM WHEELS, AIR SUSPENSION, LOADED. READY TO UPFIT. CALL FOR DETAILS.

2016 INTERNATIONAL PAYSTAR 8X6 TRIDEM CUMMINS ISX, 500 HP, ALLISON, SET BACK AXLE, ALUM WHEELS, 20/53K, 290" WB, EAGLE, LEATHER, DUAL EXH, LOADED, READY TO RIG.

$59,995

CALL

Stk# BN315372

2016 INTERNATIONAL PROSTAR DAY CAB 6X4 CUMMINS ISX 500 HP, 18 SPD ULTRASHIFT, 185" WB, 13/46, 3.70 RATIO, B-TRAIN, ALUMINUM WHEELS, LOADED.

$49,995

2011 INTERNATIONAL 9900i 6X4 B-TRAIN, ISX 550 HP, 18 SPD, 12/46, 51" HI-RISE, NEW RUBBER, LOCAL BC TRUCK, CAB GUARD, BEACONS, 726K KM, READY TO GO.

OAC OWN D 0 $

CALL

Stk# 9C054693

Stk# GH002897

2009 INTERNATIONAL PROSTAR DAYCAB, CUMMINS ISX, 450 HP, 10 SPD ULTRASHIFT, 12/40, CLEAN, LOCAL BC TRUCK, 446K KM, FRESH MVI

2016 INTERNATIONAL TERRASTAR 4X2 300 HP, 195" WB, 19,500 GVW, 6 SPD ALLISON, HYD. BRAKES, 16' COLLINS DRY VAN, LOADED W/EXTRAS.

CED

Stk# 61210393

system is entirely unique for series-produced heavy trucks.

Volvo Trucks’ new version of I-Shift makes it possible to add up to two new crawler gears. This means, among other things, that the truck can move off from standstill and trans-

Kenworth T680s Provide High MPG, Low Driver Turnover For Refrigerated Carrier Hoosier Air

Stk# FN718002

REDU

Volvo Trucks is launching a new member of the I-Shift family: I-Shift with crawler gears. The new gears, which are added to the automated transmission, provide exceptional start-ability for trucks carrying heavy loads in demanding situations. The

$13,995

Stk#16' GH108012 2006 CHEVROLET EXPRESS CUTAWAY VAN, DURAMAX DIESEL, AUTO, NEW BRAKES, ALIGNMENT, TIRES, FRESH SAFETY, ICE COLD AIR, VERY CLEAN, READY TO GO, 241 KM, 12,300 GVW, WALK RAMP .

C OWN % OA $ 0 D FROM 2.9 S E & RAT

CALL

Stk# GL245975

2016 INTERNATIONAL DURASTAR 4X2 , CUMMINS ISB 260 HP, 254" WB, 33K, GVW, 6 SPD ALLISON, HYD BRAKES, COLLINS 24’ FLATDECK, TOOLBOX, TIE DOWNS, LOADED.

Phone: 604-888-2888 www.harbourinternational.com

Wade Day is a secondgeneration lifer. He’s been in the trucking business for as long as he can remember – following in the footsteps of his father, Doug Day, who began his own career driving coal trucks in Kentucky. When Wade was old enough to drive, he helped in the construction of Interstate 65 in Indiana by piloting a dump truck for his father’s small company. That business eventually morphed into Day’s Express, which focused on cross-country refrigerated transport and grew to a fleet of 225 tractors. After college, Day worked there in various operational capacities, including dispatch.

“My Dad saw good times and bad, and ended up having to fold Day’s Express in 1991,” recalled Day. “He started Hoosier Air soon after that, and I went to work for him there in 1997.” His father chose the “Air” part of the company’s name because he liked the air-ride suspension, which helps give cargo a better ride down the road. According to Wade, all of that experience helped when he took over Hoosier Air Transport from his father in 2012. “Up until three years ago, we were running general freight,” said Day. “But we’ve since switched over to a full refrigerated fleet, which matches well with our penchant for customer service and on-time delivery.”

Today, Hoosier Air operates 85 tractors and 100 reefer trailers. The company has standardized on the Kenworth T680 with 76-inch sleeper, powered by the PACCAR MX-13 engine rated at 455 hp and optimized with the Eaton

port a gross combination weight (GCW) of up to 325 tonnes.

“I-Shift with crawler gears offers an entirely new scope for heavy trucks with automated transmission to regulate their speed when crawling slowly and reversing. The driver can haul a heavy load without worrying about getting into situations that may lead to costly standstills,” says Peter Hardin, Product Manager FM and FMX, Volvo Trucks.

Continued on page 71

with the T680 and MX-13 engine, we saw an 8 mpg average. Our very top driver has been averaging 9 mpg. I remember when I first started in the business – trucks were averaging 4 to 4.5 mpg. What we’re getting now is something else.”

While the T680s are less than a year old and have been ultra-reliable, Day said keeping the trucks rolling down the road has taken a quantum leap forward thanks to Kenworth’s TruckTech+ remote diagnostics. The system interprets fault codes and provides fleet managers and drivers with needed information. Email notifications to customers may instruct the driver to keep driving – no action required; keep driving and have the fault addressed during the next service interval; head to a dealer for service; or pull over to prevent damage. If the customer needs to take the truck in for service, the system maps out the locations of the three closest repair facilities.

“TruckTech+ gives us real-time information and that’s vital to keep our fleet running,” said Day. “I feel remote diagnostics is one of the biggest advancements we’ve seen in truck technology in many years. It’s as if we were driving blind before, but now we have visibility.

TruckTech+ is key for us in knowing exactly what’s happening with our trucks – whether we need immediate service, or if we can continue on and handle the issue at a later time. Before, if the fault light came on, our driver would call dispatch and we’d have to spend time figuring out what was happening. With TruckTech+ we know and can make immediate decisions.” b

Fuller Advantage 10-speed automated transmission.

The T680s – 32 so far – were purchased through Kenworth of Indianapolis.

“We will match our service against anyone in the industry,” said Day. “And we feel the T680 helps us in that regard. Our on-time delivery rate is 99.9 percent and our driver turnover is less than 20 percent – even with our drivers on the road six- to 10 days at a time. The T680 certainly helps lower our turnover, as the drivers absolutely love the trucks. But, we also run a drop-and-hook operation so there are no delays – drivers are always on the go making money.”

From an operational standpoint, Hoosier Air has seen a significant boost in fuel economy over the trucks the T680s replaced.

“We’ve been a SmartWay fleet, so we have trailer skirts and even boat tails, plus SmartWay-verified tires. Prior to the T680, our drivers were getting up to the mid 7s in fuel economy. Out of the gate with the T680 and MX-13 engine, we saw an 8 mpg* average. Our very top driver has been averaging 9 mpg. I remember when I first started in the business – trucks were averaging 4 to 4.5 mpg. What we’re getting now is something else.”

From an operational standpoint, Hoosier Air has seen a significant boost in fuel economy over the trucks the T680s replaced.

“We’ve been a SmartWay fleet, so we have trailer skirts and even boat tails, plus SmartWay-verified tires. Prior to the T680, our drivers were getting up to the mid 7s in fuel economy. Out of the gate Source: Kenworth

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Continued from page 70

With the new crawler gears, the truck can drive at speeds as low as 0.52 km/h. This helps immensely during precision manoeuvres such as in construction and maintenance tasks.

“The vastly improved driveability and start-ability with the new crawler gears makes the driver’s job far easier when operating in difficult terrain on slippery surfaces with heavy loads, such as at construction sites, in mines or in forests. The heavier the transport operation and the poorer the surface or the terrain, the more the driver gains from a truck with crawler gears,” explains Peter Hardin.

For haulage firms carrying out heavy transport operations on demanding surfaces as well as regular highway driving, crawler gears also offer considerable flexibility and the possibility of improved fuel economy.

“I-Shift with crawler gears makes it possible to start off from standstill in extreme situations. Combining them with a suitable rear axle ratio that optimises engine revs at high speeds results in lower fuel

rect-drive or overdrive gearbox with one or two crawler ratios. It is also possible to specify two extra reverse crawler gears.

• The crawler gears are integrated into the I-Shift transmission. In order to handle the high loads involved, several components are made of highstrength materials. The gearbox is 12 cm longer than a conventional IShift unit.

• I-Shift with crawler gears is available for Volvo Trucks’ 13- and 16-litre engines in the Volvo FM, Volvo FMX, Volvo FH and Volvo FH16.

Ratios, I-Shift with crawler gears • In a gearbox with one crawler gear the ratio is 19:1 in a direct-drive gearbox, or 17:1 in an overdrive gearbox. (The ratio of the lowest gear in a regular I-Shift directdrive gearbox is 15:1.) In a direct-drive or an overdrive gearbox with two crawler gears the lowest ratio is 32:1.

• The ratio of the lowest reverse gear is 37:1 in a direct-drive gearbox. b

consumption on the highway. This is a significant benefit to haulage firms doing this kind of work,” says Peter Hardin.

Depending on application area, I-Shift is available with one or two forward crawler gears, and with or without two reverse crawler gears. Reverse crawler gears make it possible to reverse extremely slowly, which is a major advantage when reversing manoeuvres require immense precision.

Facts, I-Shift with crawler gears • I-Shift with crawler gears is a further development of Volvo Trucks’ I-Shift automated transmission.

• The new version of IShift has been specially developed for excellent start-ability and for driving at particularly low speeds.

• I-Shift with crawler gears can allow driving as slowly as 0.5-2 km/h and can handle starts from standstill with a gross combination weight of up to 325 tonnes, which is unique for series-produced trucks with automated gearboxes.

• The transmission is available as either a di-

Source: Volvo

Page 71

1875 Kryczka Place, Kamloops, BC V1S 1S4

Chris Harrah: 250-571-5504

2016 Doepker Tandem B Log Trailer 22.5 or 24.5 Aluminum Wheels, One Piece Bunks & Stakes, Hendrickson Air Suspension, Lift Axles Available.

2017 K-Line 55 Ton Double Drop Lowbed Hyd. Detachable Neck, 10' Wide Deck, Beavertails or Squarebacks in stock, hyd. Flip Ext for Tri-Drive or 3.5m Jeep, S/A Boosters and 3.5m Jeeps in stock.

2015 Quad Axle Log Trailer 22.5 Aluminum Wheels, One Piece Bunks & Stakes, HT Air Ride Suspension.

2016 Doepker DSL30 Super B Flat Decks 32' x 28', Air Ride, 22.5 or 24.5, Steel or Aluminum Wheels, 2 Tool Boxes. LED Lights.

XL 80MFG 40 Ton Double Drop Mechanical Detachable Neck, 25’ Lower Deck, Flip Extension for use with Tri-Drive Tractor or Single Axle Jeep, 22.5 Aluminum Wheels, LED Lights.

2016 Doepker Super B Short Log Trailer 22.5 or 24.5 Aluminum Wheels, One Piece Bunks and Stakes, Hendrickson Air Suspension, 3 or 4 bundles, Lift Axles Available.

TRAILERS

www.premiumtruck.ca

250-374-3100 • 1-877-374-3100 Mark Salmon Sales Manager marksalmon.pm@gmail.com C: 250-889-1529

1946 Mills Road, Sidney, BC Office: 250-656-1689 | Fax: 250-656-1305

™

Trucks For Sale

1-855-656-1689

NEW NRC UNITS IN STOCK

Cranes For Sale

CT Power Forklifts

Distributor Opportunities

STOCK UNITS:

PM Industries is the Factory Distributor for CT Power Forklifts.

We supply Electric, Duel Fuel Gas/LPG and Diesel Forklifts.

We are currently offering Distributor Opportunities for locations across Canada.

Contact Darrell - Direct Line: 250-883-4916

• 5000 lbs, Nissan K25 Engine, LPG, Pneumatic Tires, 3 Stage, 4.5 M FFL Mast, Side Shift • 10,000 lbs, Perkins Diesel, Pneumatic Tires, 3 Stage, 5 M Mast, Side Shift.

• FB30 Electric, Zappa Controller, 3 Stg 4.8M Mast, Side Shift.

· 20,000 lb & 40,000 lb Carriers in stock, ready for chassis of your choice

2011 PETERBILT WITH MAXITEX 2281, 360 STABILITY. $150,000

SIDNEY SHOP - CRANE INSPECTION & REPAIR, DECK FABRICATION | 1-855-656-1689

Page 72

Supply Post Western Canada Edition · supplypost.com

Peterbilt Installs Its First Production PACCAR MX-11 Engine Peterbilt’s first lightweight, fuel efficient PACCAR MX-11 engine was installed recently in the company’s newest vocational truck, the Model 567 in a set-forward front axle configuration. The historic truck-and-engine combination was presented to Knife River, who drove it off the assembly

line at Peterbilt’s Denton, Texas manufacturing facility.

“The PACCAR MX-11 will bring new levels of performance, durability, reliability and overall return for customers. It is lightweight and fuel efficient, making it an ideal power choice for customers in a wide range

of applications, including regional haul, tanker, bulk haul, construction and refuse,” said Robert Woodall, Peterbilt Assistant General Manager of Sales and Marketing.

“We’re pleased to present Peterbilt’s first production PACCAR MX-11 engine to a valued customer such as Knife River.”

The truck will be used in Knife River’s mixer operations throughout the Northwest U.S. “It was a great experience to tour Peterbilt’s plant. It was obvious

employees took pride in the product they were building, and watching the state-of-the-art assembly processes and attention to quality gave us an even greater appreciation for Peterbilt,” said Scott Hammond, Knife River’s Northwest Region Equipment Manager. “We’re anxious to put the MX-11 and Model 567 to work.”

Joining Hammond at the presentation were Randy Kephart, Knife River’s Equipment Manager at its Continued on page 73

Cody Fortin 250-869-9448

Jeff Gibbs 250-869-9415

#5 -1340 Stevens Road, West Kelowna, BC V1Z 1G2

NEW

2016 Doepker DSL30 Super B Flat Decks 32' x 28', Air Ride, 22.5 or 24.5, Steel or Aluminum Wheels, 2 Tool Boxes. LED Lights.

2016 Freightliner 122SD Detroit DD15, 505 HP, 18 Speed Trans., 13,300 lb Front Axle, 40,000 lb Rear Axle with Locker, Airliner Suspension, 244" WB, 70" RR.

2017 Freightlliner M2-106, Cummins ISB, 250 HP, Allison 2500 RDS trans, 12,0000 lb Front Axle, 21,000 lb rear axle with locker, Airliner suspension, 252” WB

April 2016

Welsh Quarry Gets Terex Trucks Upgrade Hogan Aggregates has added two TA300 articulated haulers to its existing Terex Trucks fleet, helping to increase fuel efficiency and productivity at the company’s Coedana granite quarry, Caer Glaw, in Anglesey, Wales.

With nearly half a century of experience in the construction industry, Hogan Aggregates handles the production and supply of premium quality primary, secondary and recycled aggregates from four well managed quarries in Anglesey, Wales. The recent purchase of 28 tonne capacity TA300s has been supplied by Terex Trucks dealer, TDL Equipment Ltd., which is based in Tankersley near Sheffield.

“When looking to upgrade our fleet, we turned to TDL Equipment for its reliable and high-quality service,” says Jamie Hogan, production director at Hogan Asphalt. “For over a decade TDL Equipment has supplied us with many Terex Trucks, machines that have proven instrumental in boosting op-

erations – and our bottom line,” he adds.

The existing Terex Trucks currently operating in the quarry include TA27 and TA30RS articulated haulers. “We are pleased with the level of productivity delivered by the haulers, which together have accumulated over 21,000 hours since they were purchased – and are still going strong!”

The new TA300s will be working tireless 10 hour days, five days a week, hauling blasted rock from the quarry face and transporting finished product to stockpiles around the site.

Terex Trucks TA300s are powered by fuel-efficient Scania engines, offering Hogan Aggregates high uptime and increased profitability.

Built in Terex Trucks’ Motherwell factory in Scotland, the TA300 articulated hauler is well suited for the quarry’s applications, delivering reliable performance and cost-efficient hauling methods. b Source: Terex

Hunter Peterbilt Named Peterbilt Medium Duty Dealer Of The Year 2016 Freightliner Cascadia Detroit DD16, 600 HP, 18 Speed Trans., 13,300 lb Front Axle, 46,000 lb Rear Axle with Locker, Airliner Suspension, 236" WB, 72" XT.

2016 Freightliner 122SD Detroit DD16, 600 HP 18 Speed Trans., 13,300 lb Front Axle, 46,000 lb Rear Axle with Locker, Airliner Suspension, 244" WB, 70" XT Mid-Roof Sleeper.

USED

2012 Freightliner Cascadia Detroit DD15, 505 HP, 13 Speed Trans., 13,300 lb Front Axle, 40,000 Rears with Lockers, Airliner Suspension, 244" WB, 72" RR Sleeper.

2005 Freightliner Classic, 70” Midroof MBE 4000, 450 HP, 18 SPD, 12,000 Front Axle, 40,000 Rears with Lockers, Airliner Suspension, 244” WB, 1,137,800 kms.

2010 Freightliner Cascadia Detroit DD15, 560 HP, 18 SPD Trans, 12,000 lb Front axle, 46,000 lb Rear Axle with Locker, Airliner Suspension, 224" WB.

TRAILERS

www.kelownafreightliner.com

250-769-7255 • 1-888-878-2511

Hunter Peterbilt – which operates 17 dealerships in five states – was named the 2015 Peterbilt Medium Duty Dealer of the Year. Hunter Peterbilt, headquartered in Butler, Penn., grew their year-over-year medium-duty sales and market share by more than 10 percent.

“Hunter Peterbilt is aggressive and innovative in its medium-duty strategies, achieving outstanding results in supporting the full line-up of Peterbilt’s Class 5-7 conventional and cabover models,” said Darrin Siver, Peterbilt General Manager and PACCAR Vice President. “They have a knowledgeable, professional and dedicated medium-duty sales team that provides customers with unique solutions and exceptional support.”

Peterbilt presented the award to Hunter Peterbilt President and Dealer Principal Jeffrey Hunter and Ex-

ecutive Vice Presidents Bill Hunter, David Hunter and Nancy Mycka during its annual Dealer Meeting in San Diego. The two-day business meeting included presentations and breakout sessions, including focused overviews of the new PACCAR MX-11 engine and SmartLINQ connected truck technology.

“This is a great honour for the entire Hunter Peterbilt team and we are proud to be recognized for our hard work and dedication in serving the full range of our customers’ needs, including our valued customers that operate mediumduty vehicles,” said Jeffrey Hunter. “In addition to sales and service, we have a strong PacLease fleet of medium-duty trucks to provide our customers with additional solutions to meet their business requirements.” b Source: Peterbilt

April 2016 Continued from page 72

Coos Bay (Ore.) and Roseburg (Ore.) locations, and Colin Milligan, Shop Manager.

Knife River was founded in 1917 and is based in Bismarck, N.D. They are a full-service civil and residential contractor operating in 19 states. In addition to its contracting services, Knife River is one of the U.S.’s largest aggregate producers and supplies high-quality asphalt, readymix concrete and other construction materials.

The Model 567 SFFA

Supply Post Western Canada Edition · Our Readers Are Your Buyers they were presented today is one of 200 Peterbilt trucks the company has ordered.

The PACCAR MX-11 Engine The 10.8-liter PACCAR MX-11 engine became available for order through Peterbilt dealerships in November and production began this week. It has an output of up to 430 horsepower and 1,550 lb.-ft. of torque.

The PACCAR MX-11 engine has six inline cylinders and a double overhead camshaft design.

Automatic Border Fee Payment App Could Reduce Crossing Delays An upcoming pilot project which would automatically collect border-crossing fees from commercial trucks travelling to the U.S. at the Peace Bridge will reportedly reduce wait times by 6.5 percent.

According to the Buffalo News, the automated system would be used to collect the US$13.05 user fee that truck operators who do not have an annual user fee decal currently pay by hand at the border. The system – which could possibly take the form of a mobile app – is expected to reduce the backups of trucks on the Buffalo/Fort Erie, Ont. bridge, officials say.

CBP said the new au-

LIKE

US ON FACEBOOK!

If you’re a fan of

visit us on Facebook and give us the thumbs-up!

On Facebook, search Supply Post

tomated user fee collection system will be implemented in a pilot project in Buffalo this year and will also eventually be tested at border crossings in Detroit and El Paso, Texas, before being implemented nationwide in 2017.

The U.S. Department of Homeland Security made the announcement in a document it sent to Congress accompanying President Obama’s Fiscal 2017 budget proposal.

The manual collection of user fees is inefficient, the budget document said.

“The current manual process results in increased wait times and fuel costs for carriers and loss of work hours for CBP. For example, at the Port of Buffalo in NY 2015, approximately 1,700 work hours were spent performing cash collections,” which took an average of 80 to 90 seconds per vehicle.

Ron Rienas, the general manager of the Peace Bridge Authority, told the newspaper that the cumulative impact of the new system will have a positive impact on border congestion and wait times.

The new fee-collection system will be the latest of several major upgrades that Customs and Border Protection initiated after a pre-clearance pilot project unveiled out-of-date technology at the Peace Bridge.

CBP has already upgraded its “outdated” radiation detectors and is moving to fix its slow internet connection, which slowed processing. b Source: CTA

PACCAR MX engines are the only commercial diesel engines to use Compacted Graphite Iron (CGI) in both the engine block and cylinder head. CGI is approximately 20 percent lighter and 75 percent stronger than traditional gray iron.

The PACCAR MX-11 engine is designed to achieve an industry-leading B10 life of one million miles.

It also utilizes a common rail fuel system with injection pressures of 2,500 bar to optimize combustion for low fuel consumption and noise levels.

Peterbilt Model 567 SFFA Peterbilt’s Model 567 SFFA lets customers maximize payloads while helping meet state and federal bridge law requirements with a chassis that optimizes weight distribution.

It is the industry’s newest heavy-duty vocational truck and features modern, distinctive styling.

“A main reason we selected the Peterbilt Model 567 SFFA is it’s the newest, most up-to-date set-forward front axle available,” said Hammond. “It has the

Page 73

advanced features to enhance our operations and I’m sure it will be a favorite with our drivers.”

It is available in both 115- and 121-inch BBC lengths. The 115-inch BBC has a bumper to front axle distance of 29 inches and the 121-inch BBC has a bumper to front axle distance of 31 inches. Peterbilt also offers the Model 567 in a set-back front axle configuration, also available in a 115- or 121-inch BBC length. b

We’re hauling asphalt to get you the next issue!

AD DEADLINE: April 22, 2016 5:00 pm

Source: Peterbilt

Mark Clarke 250-612-7512

Byron Roberts 250-640-9599

1015 Great Street, Prince George, BC, V2N 2K8

2016 Freightliner 114 SD Tandem Steer Axle Mixer Detroit DD13, 450HP, Alison 4500RDS 6 Speed Auto Trans, 46 Axles w/ 4 Wheel Lock Up, Hendrickson Primaax Air Suspension, London 14 Yd Bridgemaster III Mixer.

2017 Freightliner 122SD Daycab Tractor Detroit DD16, 560HP, Ultrashift Plus, 12,000 Front Axle, 46,000 Rears with Double Lockers, Airliner Suspension.

2016 Freightliner Cascadia 60" XT Sleepercab Detroit, 560HP, 18spd, 13,300 Front Axle, 46,000 Rears with Lockers, Airliner Suspension.

TRAILERS

2016 Freightliner 122SD Tri-Drive Tractor Cummins ISX, 550HP, 18 spd, 16,000 Front Axle, 69,000 Rears with Double Lockers, Airliner Suspension.

2012 Western Star 4900 Tri-Drive Detroit DD16, 600HP, 18 spd, 20,000 Front Axle, 69,000 Rears with Lockers, Airliner Suspension, 338,000kms, Fresh MVI.

2016 Freightliner 122 SD Tandem Dump Truck Detroit DD16, 560HP, Alison 4500 RDS Auto Trans, 20,000 Front Axle, 46,000 Rears with Lockers, Airliner Suspension c/w 16'16" Langfab Dump Box, High Lift Gate.

2013 Peterbilt 587 70” Sleeper Paccar MX, 485HP, 18 spd, 12,000 Front Axle, 40,000 Rears with Lockers, Air Suspension, 782,300km, Fresh MVI.

www.premiumtruck.ca 250-563-0696 • 1-800-595-4411

Page 74

Supply Post Western Canada Edition · supplypost.com

Wacker Neuson Group At Bauma 2016 The brands Wacker Neuson and Kramer will be present in the open-air exhibition grounds at the stand 1109-1209 of the Wacker Neuson Group with an exhibition area of around 5,300 square meters. In focus with both brands: Solutions with innovative performance features, which meet the growing customer require-

ments in terms of economic efficiency, performance, as well as environment and operator protection.

This world of experience will be conveyed to visitors through demo shows and demo areas. The product exhibition will complete the experience. “For us, Bauma is and remains the most important forum to present our power of inno-

#26 19695 - 96th Ave, Langley, BC

• ENGINE REPAIRS • BRAKES • SAFETY INSPECTIONS • FLEET MAINTENANCE MONDAY to FRIDAY

7:00am to Midnight SATURDAY

8:00am to 8:30pm

604-888-3838

vation and performance to a crowd of experts,” says Cem Peksaglam, CEO of the Wacker Neuson Group.

“I can promise that a visit to our stand will be a real experience. In addition to various innovations and trade fair highlights, visitors will have the opportunity to get to know our extensive range of services rendered.”

Solutions with innovative performance features “Of course, we cannot yet disclose all of our new products for Bauma.

However, it has already been revealed that our engineers have worked hard on improvements and innovations in order to better meet customer needs and to provide real added value,” says Martin Lehner, Chief Technology Officer at the Wacker Neuson Group.

“Visitors can already look forward to various new features in terms of operator and environment friendliness, range of applications and innovative technologies.”

A major topic for both brands is alternative drive systems. At Bauma 2016, Wacker Neuson will present the battery-powered rammers AS30e and AS50e with improved travel speed. The vibratory rammers are part of the Wacker Neuson “zero emission”

series, which also includes the electric wheel loader WL20e, the track dumper DT10e as well as the miniexcavator 803 dual power.

With the “zero emission” solutions, Wacker Neuson is serving the demand for emission-free machines.

Kramer is also presenting a highlight in this area: the first all-wheel drive wheel loader with an electric drive system. The electric loader with nearly 2,000 kilograms of tipping load is perfect for emission-free work in indoor applications. Thanks to a high battery capacity, the user does not experience any performance losses compared to conventionally operated machines and benefits from reduced operating and service costs due to the electric drive. With these forward-looking solutions, the Wacker Neuson Group is again proving its innovative leadership in the segment of alternative drive systems.

Both brands will present a cross-section of their product ranges and services rendered at Bauma.

The innovations, of which there will be many, will however be the focus.

Kramer is presenting the compact tele wheel loader 5065T. This machine completes the portfolio of universal wheel loaders with a telescoping load arm. Another highlight is the telehandler 2706, whose compact dimensions in height and width are below the two-meter limit. Its stacking height lifts loads up to nearly six meters. It will be presented to an expert au-

April 2016 dience from the construction industry for the first time at the trade fair.

Within the range of soil compaction, Wacker Neuson is complementing its series of powerful vibratory plates, which are above all characterized with a very low hand-arm vibration (HAV), with the reversible vibratory plates DPU80, DPU90 and DPU110. The single drum soil compactors RC50 and RC70 are now also available. The compact models of the 5 and 7-ton class are characterized by their compact dimensions, a gradeability of up to 60 percent as well as their ease of operation.

The excavator models EZ80 and EZ53 with 8 and 5.3-ton operating weights are celebrating their premiere at Bauma 2016. With these two zero tail excavators — without tail swing — operators can also work efficiently in confined spaces, which often occur in urban areas. The excavator EZ53 convinces with its excavation and handling capacity and offers a particularly simple service access. The larger model EZ80 scores with a low fuel consumption and high excavation power. Clear displays, sliding windows that open on both sides, a two-piece windshield, automatic air conditioning and the air-sprung driver’s seat with seat heating give the cabin a high level of comfort. These models complement the recently introduced series of track and wheeled excavators up to 10 tons (ET65, ET90,

EW65 and EW100), which have been in great demand since their market launch.

All machines are extremely powerful thanks to the innovative kinematics and a bucket angle rotation of over 200 degrees with a simultaneously very economical fuel consumption The new wheel dumper DW50 will also be presented for the first time at Bauma. The dumper has compact dimensions, is extremely maneuverable and can hold its own with much larger models when it comes to the technical outfitting. The wide and safe access into the machine is particularly user-friendly.

It complements the series of low-maintenance, hydrostatic, all-wheel drive Continued on page 75

?

Can’t find what you’re looking for?

We have many more listings on our website!

supplypost.com

Heavy Haul

800-832-9410 www.aspentrailer.com

Oil & Gas Forestry Mining

April 2016 Continued from page 74

ECO mode units that above all stand out in uneven ground conditions due to the optimal off-road capability and traction. The DW60, DW90 and DW100 models with payloads of 6, 9 and 10 tons are also part of the series.

Another new machine: The telehandler TH627 that has a stacking height of nearly six meters. It is a versatile helper particularly in confined application areas. The new wheel loaders WL44 and WL54 have additional features in terms

Supply Post Western Canada Edition · Our Readers Are Your Buyers of comfort. A very sturdy design, large lifting heights as well as a comfort cabin characterize the two powerful all-rounders.

In the area of concrete compaction, Wacker Neuson is presenting its entire product range of internal and external vibrators.

The broad product range of internal vibrators will be at the center of attention. Based on the application, the customer can thus choose from a modular HMS system, the basic line IEC and IE or the premium lines IRFU or IREN. The

Terex Trucks Unveils New Products And Plans At AED Summit, Washington The AED Summit is an annual convention for equipment distributors, organised by Associated Equipment Distributors (AED) to promote dialogue within the industry. This year’s event took place at the Gaylord National Resort & Convention Centre in Washington.

Attendees included former US president, George W. Bush, talking about his experiences as the country’s 43rd president.

A key Group of Terex Trucks representative attended the summit, led by Paul Douglas, Director and General Manager, Sam Wyant, Global Sales and Marketing Director, and Matt Deloglos, Head of the Terex Trucks North American regional sales. They were backed by a full complement of North American regional sales managers and service managers.

Over the course of three days, the Terex Trucks team held individual meetings with 20 different dealer decision-makers. They were able to offer an update of Terex Trucks’ future plans in the North American market and underline the company’s rock-solid commitment to investment in its dealer network, people, new products and aftersales.

Above all, the meetings were an invaluable opportunity to discuss how Terex Trucks can best support its dealers

and their customers in 2016.

“The feedback we received from our North American dealers during the back-to-back meetings at the AED summit was very encouraging,” said Paul Douglas, Director and General Manager. “It was clear our dealers recognise and appreciate the business improvements we have put in place and trust us to do all we can to help them develop their sales and fully support their customers.”

“Most dealers generally reported a strong 2015 and see an equally positive outlook ahead for 2016. There is clearly business to be had in the North American market and a demonstrable appetite for Terex Trucks’ products, with their unique offering of excellent quality coupled with low cost of ownership.

“We are investing in our dealer network and are serious about building relationships, trust and increasing the Terex Trucks brand in the America,” Mr Douglas continued. “This investment underlines our dedication and commitment to the long haul.”

AED is an international trade association representing companies involved in the distribution, rental and support of equipment used in construction, mining, forestry, power generation, agriculture and industrial applications. b Source: Terex

modular premium system IRFUflex will be presented at Bauma for the first time.

It consists of a converter, which can be combined with various vibrator heads, and a protection hose length of 0.3 to 10 meters. IRFUflex thus combines the flexibility of the models HMS, IE and IEC from the middle segment and the high degree of technological design and development and comfort from the time-tested and proven IRFU series. With the concrete specialists, Wacker Neuson offers competent

advice for concrete products and projects, which supplements the range of services rendered. Visitors have the opportunity to receive detailed advice about the topic of concrete compaction and to benefit from the knowledge of experts.

Experience services rendered live The Wacker Neuson Group offers an extensive range of services rendered to be able to put together the right package for all customer needs. In this way, customized financing solutions can also be

offered at very attractive conditions, as well as the telematics for a variety of products. Repair and maintenance with original spare parts, which are supplied within a very short period, is another facet that makes the Wacker Neuson Group an interesting partner.

“We can clearly set ourselves apart from other manufacturers with our services. That is why we will create a separate area at Bauma where customers can convince themselves of our customer focus and quality of advice,” says

Page 75 Cem Peksaglam. “Even if the signs for 2016 are no longer as enjoyable as a year ago, there is still a high demand for infrastructure investments as well as modernization and rehabilitation world-wide.

Just like in the past, Bauma will continue to stimulate our European business and at the same time offer an ideal forum to make new contacts and to maintain customer relationships that have existed for many years.” b Source: Wacker Neuson

Page 76

Supply Post Western Canada Edition · supplypost.com

One Crane More Efficient Than Two When a company sells its services and a project on schedule, that company must deliver. If the company fails to finish the project on time, this not only affects the current project, but it also jeopardizes the ability to secure future contracts.

Recently Big B Crane and sister company Basden Steel Corporation, both of Burleson, Texas teamed up with Deem Structural Services of Longview, Texas to sell their services on schedule for a 290,000-ft2 (26,942-m2), 2,100-USton (1,905-tonne) building expansion project for a leading global aerospace company. Basden Steel provided fast-track design, assist and fabrication services for the contract, which began in May 2015 and closed just five months later. The full building project is expected to be completed in the summer of 2016.

The contract included an extremely tight steel and building slab erection schedule for the two-story structure. Big B Crane provided the lifting services for the eight-week pick plan.

“We had to complete 1,300

picks within a very short time period,” explains Big B Crane President, Daniel Basden, “and 120 picks included objects weighing 11,000 lb. (5 t) or greater.” Ben McGregor, Vice President of Basden Steel’s Oklahoma division, adds, “We set a lofty goal of lifting 50 pieces a day to make the schedule.”

The original plan to complete the project was to use two, 150-US-ton (136-tonne) capacity class cranes to lift the smaller pieces. When it came time to lift and position the heavy structural pieces, of which the heaviest weighed 12,500 lb. (5.7 t), then both cranes would be used in a tandem lift. This would have posed somewhat of a challenge for Big B Crane to stay on schedule, since Basden Steel and Deem Structural’s crews had such a short window to complete the erection work.

“You have to coordinate the swing radius when working with two cranes, so there is a lot of crane downtime,” explains McGregor. “If a single crane can be used, this reduces the time for many of the

picks, and it increases lifting safety.”

This got Daniel Basden thinking about Big B Crane’s current fleet and the changing construction industry needs in the Texas and Oklahoma markets.

“Concrete precast panels are getting bigger and heavier and steel is getting longer, so we were seeing a need for a higher capacity crawler crane than the two 250-US-ton (227-tonne) class models we have in our fleet,” he says. Plus, those two cranes didn’t deliver the capacity needed on the building expansion project to eliminate the need for tandem lifts with the smaller cranes.

HC 285 crane just right Daniel Basden searched for a higher capacity crane to eliminate the need to use the two 150-US-ton (136-tonne) capacity cranes for the building expansion project. The original consideration was to jump to a 300-US-ton (272-tonne) class crane, but this came with a sobering discovery.

“The jump to the 300-USton (272-tonne) capacity comes with a significant additional capital investment,” he says.

Kelowna 1-800-735-3943

When Big B Crane representatives met with Terex Cranes distributor, Scott-Macon Equipment of Houston, Texas and Terex representatives, there was a lot of discussion about the lifting company’s capacity needs for its market.

All parties then started to look at a new 285-US-ton (259-tonne) capacity crane Terex recently introduced to the market. “The new HC 285 crane is a good inbetween crane that gives customers virtually the capacity of a 300-US-ton (272-tonne) class crane but at a price similar to that of a smaller crawler crane, so a company can receive a high return on investment,” comments Jim Strobush, Senior Product Manager – Crawler Cranes for Terex Cranes North America Offering a maximum system length of 376 ft (114.6 m), the Terex HC 285 lattice boom crawler crane comes with a maximum 103.5-US-ton (94-tonne) upper and 28-US-ton (25.4-tonne) car body counterweight package to offer a 285-US-ton (258.5-tonne) lift capacity at a 16-ft (4.9-m) radius.

While the crane’s lift chart rivals that of 300-US-ton (272-tonne) cranes, its compact carrier can be transported in a single load.

“The base crane carrier measures less than 10.5 ft wide (3.2 m) by 12 ft high (3.7 m), which enables it to be transported on a

Penticton 1-877-766-7627

In-House Financing Available On Any Make Truck, Trailer, Or Equipment P.O.R.

P.O.R.

NOW AVAILABLE!

2016 Int’l 5900, Tri-Drive, ISX 550, 2050 Torque, 18 2017 International HX, Axle forward/back, ISX or Spd, 20/53 Axles, 4.3, 272" WB, Magnum Quad Pkg, N13, short/long hood versions, lightweight design Old Style Neway Susp, 2 exp. bunks to 9'6". with a work hard attitude.

$69,500

$35,000

2008 4300, with 26' T & G flatdeck, 8 winches, MaxxForce DT 255 hp, 33,000 LBS GVWR, 5 spd auto, 5.57 gear ratio, 475,180 km.

P.O.R.

2012 International 7500, P19221, MF10 350, 6 Spd 2015 International 9900, 72" Sleeper, Cummins Allison, 203,239 km, Engine & Injector Warranty ‘til ISX, 500 HP, 18 spd, 14/40 Axles 3.90 GR, Stock# 7200 hrs, 320,000 km or 05/13/2016.

FN748490.

2 to choose from

2014 International TerraStar, 18' diesel reefer van, MaxxForce 7, 300 hp, auto, 19,500 GVWR, 4.3 GR, 46,678 km, 927 hrs, Warranty – call for details.

WWW.COOKSONMOTORS.COM

April 2016 standard low-boy trailer, and the entire crane is designed with quick transportation in mind,” explains Strobush. Daniel Basden adds, “Many 300-US-ton (272-tonne) crane carriers ship in two pieces, which adds one more load, another driver, additional set-up time and more expense.”

Since Big B Crane’s equipment is often used

by Basden Steel on high profile projects like the building expansion, McGregor notices safety enhancements built into lifting equipment. “Safety requirements are high on our projects, and I see a lot of safety enhancements on the HC 285 crane,” he says. This includes a new tram fall protection system where the full length of boom is equipped with 20-in-wide (500-mm) heavy-duty non-slip aluminum walkways and a track-guided travel tram that offers single-point har-

Continued on page 77

ness hookup for full-length access to the boom during assembly and disassembly.

After analyzing all the capabilities and safety enhancements of the new Terex crawler crane, Big B Crane fast-tracked the crane order through ScottMacon Equipment for the building expansion project.

“Finishing the building expansion on schedule meant we needed that crane for the project,” says Daniel Basden. “Scott-Macon and Terex worked with us to get the crane to the jobsite when needed, and ScottMacon’s service department has really taken care of our crane equipment needs over the years.”

The HC 285 crane was shipped directly from the Terex Oklahoma City facility, which just happened to be less than 10 mi (16 km) from the project site. It was immediately assembled and put to work.

Allstate Peterbilt Group Named Dealer Of The Year Recognized for achieving the highest levels of performance throughout its aftermarket operations, Allstate Peterbilt Group was named the 2015 North American Parts and Service Dealer of the Year by Peterbilt Motors Company and PACCAR Parts.

Allstate Peterbilt Group operates 20 locations throughout Minnesota, North Dakota, Ohio, South Dakota and Wisconsin.

Peterbilt announced the award during its annual Dealer Meeting in San Diego. The two-day business meeting included presentations and breakout sessions, including focused overviews of the new PACCAR MX-11 engine and SmartLINQ connected truck technology.

“Every Allstate Peterbilt Group team member at each of our 20 locations is committed to serving the full range of customer needs,” said Allstate Peterbilt Group Dealer Principal Don Larson. “Supporting customers’ parts and service needs is essential to ensuring the highest levels of customer satisfaction and peak vehicle performance. Our customers rely on us to provide efficient, cost effective solutions that maximize their uptime and

bottom line.”

The award was presented to Larson and Allstate Peterbilt President Jeff Vanthournout.

“Extensive parts inventory, outstanding service facilities and skilled, factory-trained technicians – including PACCAR MX engine certification – are but a few of the reasons Allstate Peterbilt Group received this prestigious award,” said David Danforth, PACCAR Parts General Manager and PACCAR Vice President. “Their strong commitment to providing customers with convenient, high quality parts and service was clearly demonstrated this year with the addition of a new state-of-the-art facility.”

“We congratulate the entire team of Allstate Peterbilt Group for again raising the bar in providing customers with a best-in-class aftermarket experience,” said Darrin Siver, Peterbilt General Manager and PACCAR Vice President. “They embrace and invest in the full range of Peterbilt and PACCAR Parts programs, including full parts and service support of PACCAR MX engines.” b Source: Peterbilt

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Continued from page 76

Ahead of Schedule The lift plan for Basden Steel included positioning and slowly moving the HC 285 crane down the center of the building to lift the steel, joists, decking and staircases to the left and right of center for the new two-story structure. For the project, full upper and car body counterweight was used, and Big B Crane equipped the machine with the full 100 ft (30.5 m) 16 HL jib and 180 ft (54.9 m) of main boom.

“We averaged working at a 180-ft (54.9-m) radius for the lifts,” says McGregor. Daniel Basden adds, “The HC 285 has a phenomenal lift chart.

There is no way we could have finished this project as efficiently as we did

without this crane being on site.”

McGregor mentions there weren’t any significant challenges when it came to the individual lifts. The major hurdle was sticking to the extremely short lifting schedule, so the frame construction phase could be finished on time. “We planned to lift 50 pieces a day, and we started lifting three days behind schedule,” he says. “Three weeks into the lifting phase, we were 164 pieces, or three days, ahead of schedule by using the HC 285 crane. We finished hanging our last piece of steel about one week ahead of schedule.”

In about seven weeks, the trio of Big B Crane, Basden Steel and Deem Structural lifted and placed 2,100

US tons (1,900 tonnes) of steel with the aid of the Big B Crane’s new Terex HC 285 crane. “The crane gave us the combination of excellent reach and capacity, exactly what was needed for this project,” says Daniel Basden.

The week of October 19, Big B Crane’s crew began to disassemble the HC 285 crane to ship it to the company’s Burleson yard.

“Move out was smooth and went as planned,” comments McGregor. “Having the HC 285 crane at the project saved us the time and expense for demobilization of a second crane.

Everything on this project went according to plan. I wish all our projects could go this smoothly.” b

Page 77

Right Trucks Sales & Service Ltd. 10847 Scott Road, Surrey, BC V3V 4G8

Financing Available OAC • Warranty Available on Some Models

1-866-404-4466 • 604-584-9555 $16,800

$24,800

2001 Hino SG with 24’ Van body and 3000lb Aluminum Power Tailgate, 6 Cyl. 11R 22.5 Tires, 4 new on rear. Turbo Hino Diesel.

2004 Sterling Acterra 30” Sleeper with 22' Flat Bed Caterpillar C7 - inline 6 Cyl. Diesle, 6 Spd Std Trans, Hyd. Brakes, 12K lb Front, 21K lb Rear, 220,000 Original KMs. Fully Serviced and BCMVI til April 2017.

$19,800 $26,500

$26,800

Source: Terex

2003 International 4300 - 95,000 ORIGINAL MILES! DT466E 230 HP 6 cylinder diesel engine, Allison MD4060 w/ PTO Automatic, Full Air Brakes.

$32,800

2005 International 4400 with 24’ Steel Deck (No DPF SYSTEM)DT466 International 6 cyl. diesel with 6 new injectors, Allison, Full Air Brakes.

2012 International 9900 Prostar Tractor

2008 Kenworth T300 with 20’ Deck Cummins ISB 200 HP 6 cyl, 6 spd. standard, Hydraulic brakes 210,000 miles.

17,800LBS IN STOCK NOW

NEW TEMISKO SUPER B COMBO FLATDECK No Crossmembers, 3.5 extruded aluminum floor

1998 Western 53' Tridem Air Ride, roll tarp, barn doors, Hallco live floor, new safety inspection.

Temisko 48' Combo Flat, 8,960 lbs, extruded Alum deck, No Crossmembers, front axle slide, 2 tool boxes, 1 dunnage rack.

New 55/60 TON Blackhawk lowbed 10’ wide x 24’ working deck, squared tail, tandem jeep & booster ready, 14 hp power pack, gooseneck fenders. Wider beam centres for added strength and stability.

New Temisko Super B Aluminum Flo-Thru Chip Trains T.A.C. legal with 49” BC spreads or 60” tridem lead, 6,000cu. ft. capacity, 20 years of building rugged trailers for Canadian hauling.

NEXT STOCK. 2 SETS MAY DELIVERY

604-852-3303

3387 MCCALLUM RD, ABBOTSFORD, BC V2S 7W6

www.specializedtrailers.ca

$24,800

$33,800

2007 GMC W4500 Cab and Chassis 4 cylinder Isuzu Turbo Diesel, Automatic, Hydraulic brakes, 90,000 kms.

2006 GMC Crew Cab 4x4 with 15' Reefer Van Body, New Isuzu 6.6L Diesel Engine w/ 160,000KM warranty. Allison auto trans., hyd. brakes, 238,500 KMs on Chassis.

$18,500

$36,800

2007 Chev W5500 Cab and Chassis 301,000 KM. Isuzu 4HK1-TC 5.9L, 190 HP Diesel Engine, Aisin auto trans., hyd brakes, 18,000 lbs. Gross Vehicle Weight 109" wheelbase, can take 12' van body or flat deck.

2007 Freightliner M2 190 HP 6 cyl diesel, 121,000 KM, Allison auto trans, air brakes, 12K# Front, 21K# Rear, 285" wheelbase, 24' Steel Roll Back, 12,000 lb Winch. Fresh MVI.

$39,800

$14,800

2008 Hino 338 260 HP 6 cyl. Inline Diesel, 254,000 original KMs, 24' Kidron Insulated Van Body ThermoKing Diesel Reefer, fully serviced and fresh BC MVI.

2006 Ford E450 w/ 16' Van Body & Maxon 1500lb Railgate 14,050 GVW, 6.0 L Ford Diesel, 170,000 KM.

www.righttrucks.com

PHOTO ADS

Book your ad online at: www.supplypost.com/truckpost 1-800-663-4802 Our Readers Are Your Buyers

FIND MORE TRUCKS ON-LINE AT

WWW.TRUCKPOST.CA

PAGE 78 · APRIL 2016 2017 FREIGHTLINER M2 HYDROVAC

WWW.TRUCKPOST.CA 2016 HYDROSPADE 600 TRAILER

2013 KENWORTH T800 TRUCK

2014 KENWORTH T680

250 Cummins, auto, lock-up, 1200 gal debris, 800 US gal water, 400K boiler, 6 GPM @ 3400 psi water pump, 11R22.5 rubber, air suspension, 5" vac boom. $279,900.

Edmonton, AB.

Extreme weather trailer vac. 60 hp Kubota, 900 CFM Roots blower, 6.4 GPM @ 3400 psi Giant water pump. Hotsy 425K BTU boiler. Heat traced water lines & heated tanks.

230 gal. water, 600 gal, debris. $89,900. Edmonton, AB.

Cummins ISX15 -600 HP, Mileage 155,000 miles, wheel base 230 inches, front axle 20K rear 46K, Trans 18 speed, ratio 4.30. Great shape! $97,500. Cdn. OBO.

PACCAR MX, 500hp, 18 Speed, 13.2K Fronts, 40K Rears, 76" Sleeper, 511,000 kms. Selling Price $119,900.

780-433-1467 or kheather@xplornet.com www.hydrovacsunlimited.com

780-433-1467 or kheather@xplornet.com www.hydrovacsunlimited.com

Contact gmtf@shaw.ca or Phone 250-489-9502 or 250-421-1930 · www.fiorentinobros.com

GREATWEST KENWORTH CALGARY

2014 KENWORTH T680

2000 INTERNATIONAL 4900 BUCKET TRUCK

2016 WESTERN STAR 5700XE

403-537-2292 or Toll Free: 1-888-253-7555 2016 WESTERN STAR 4700SB

Paccar MX 455 hp, 13.2K Fronts, 40K Rears, 3.25 Ratio, 76" Sleeper, 619,000 kms. Selling Price $114,900.

466 – 8 speed. 55 foot Altec Boom. Double man basket. $17,500.

Daycab, DD15, 505 hp, 1650, DT12 transmission, 46K rear axles, Stock #100057, Serial #GU4728. P.O.R.

Lang Fab roll off system, Cummins ISL, Eaton 13 speed manual transmission, Stock #100019, Serial #HG4396. $162,357 Cdn.

GREATWEST KENWORTH CALGARY

CALL FRANK

WESTERN STAR TRUCKS - SURREY

WESTERN STAR TRUCKS - SURREY

403-537-2292 or Toll Free: 1-888-253-7555 2011 KENWORTH T660

250-997-7455 · fawahl@telus.net 2010 FREIGHTLINER CASCADIA 125

604-882-0902 · 1-866-726-1072 · ggc@wsstvan.com 2012 WESTRN STAR 4900SA

604-882-0902 · 1-866-726-1072 · ggc@wsstvan.com YOUR AD COULD BE HERE...

$99 per truck ad Sleeper tractor, Cummins ISX 485 hp, 1650 fresh rebuilt engine with warranty, RTLO-18913A, 1,047,898 km, Stock #113451, Serial #945991. $85,000 Cdn / $63,433 US.

Detroit DD15 505 hp, 1650, RTLO-16913A 40s, 961,697 km, Stock #100790, Serial # AN9389, very well looked after unit and very clean. $42,000 Cdn / $31,343 US.

4900SB FE edition, Detroit DD15 505 hp, 1650, 13 speed, 40s, 697,785 km, Stock #113263, Serial #BM3207. Balance of engine extended warranty fully transferable. $79,650 Cdn / $59,440 US.

WESTERN STAR TRUCKS - SURREY

WESTERN STAR TRUCKS - SURREY

WESTERN STAR TRUCKS - SURREY

604-882-0902 · 1-866-726-1072 · ggc@wsstvan.com

604-882-0902 · 1-866-726-1072 · ggc@wsstvan.com

604-882-0902 · 1-866-726-1072 · ggc@wsstvan.com

• Full colour photo ad of your new or used truck.

• Exposure to 13,000+ Supply Post Readers, and 12,000+ Online Visitors.

• Only $99 to advertise! (per individual unit).

• 45 words max.

CALL SUPPLY POST TODAY! 1-800-663-4802

April 2016

Supply Post Western Canada Edition · Our Readers Are Your Buyers

Page 79

Find Trucks & Trailers for sale at

.ca

2014 RAM 5500 IMT SERVICE DECK

2014 RAM 5500 SLT CHASSIC CAB

1,534 km, 6.7 Cummins turbo diesel, 6 spd Aisin auto trans., 11' IMT service deck, 5005 IMT 5,000 lb electric crane, VMac VR70 U/H compressor. Price $129,995 + $698 Admin Service & Tax. Stock #NLR50399. DLR #30541.

22 km, 6.7 Cummins turbo diesel, 6 spd Aisin auto trans., regular cab, SLT package, 84" cab to axle, PTO ready. Price $59,995 + $698 Admin Service & Tax. Stock #NLR52642.

DLR #30541.

Call Murray 1-800-946-0895 www.northlanddodge.ca

Call Murray 1-800-946-0895 www.northlanddodge.ca

NORTHLAND CHRYSLER DODGE JEEP RAM

NORTHLAND CHRYSLER DODGE JEEP RAM

2012 RAM 2500 REGULAR CAB 4X4

2014 RAM 5500 4X4 SERVICE TRUCK

With 8 Ft Box, 5479 KM, 5.7 liter Hemi V8, 6 spd Auto Trans., Anti Spin rear differential, Western 8’ - 10’ Wide Out Plow, Henderson Sander. Price $39,995 + $698 Admin Service & Tax. Stock #SLR22677. DLR #30541.

1585 KM, 6.7 Cummins Turbo Diesel, 6 spd Aisin Auto Trans., SLT Cab, 9 Ft Brutus Service Body, Cobra 3300 Crane, VMAC VR70 Underhood Comp. Price $126,995 + $698 Admin Service & Tax. Stock # NLC54485. DLR #30541.

NORTHLAND CHRYSLER DODGE JEEP RAM

NORTHLAND CHRYSLER DODGE JEEP RAM

Call Murray 1-800-946-0895 www.northlanddodge.ca

1971 KENWORTH LIGHT WEIGHT TRUCK

On Newsstands Everywhere!

BOOK YOUR AD TODAY CALL

1-800-663-4802

Better than new L.W.! Strong 500+ M-14. 18918, 1800 series drive line. 20,000 lb. front axle. New steering box. 46,000 lb, 8'6" Rockwells on airliner c/w 4.30 ration & double air lockers. Reskinned 1982 cab. Everything 8'6". Anser bulkhead & jeep. Totem tri-axle. All hubs, drums, wheels new when built 1 year ago. Brakes & tires all new. This truck will net 42,000 kg with no tolerances. Certified until Sept.

2016. New price: $59,000 firm.

CALL PAUL AT: (250) 640-1055

Call Murray 1-800-946-0895 www.northlanddodge.ca

2004 PEERLESS LB50 TRIDEM LOWBED TRAILER

9' wide, double drop, detachable, aluminum wheels, c/w 2004 Peerless JP30 S/A Jeep, excellent condition. $72,500.

PACIFIC RIM EQUIPMENT 250-493-4545

Want a Raise??? LIGHTEN UP!!

Maximize Payload

• High Strength Swedish Steel • One piece or folding stakes • Bolted Band Clamps allow any frame rail width • Durable factory Powder Coated paint

Timber Bunks

Lightweight Swedish Steel Innovative Designs

Call 877.563.8899 or 250.563.8899 Prince George, BC www.prolenc.com

Page 80

Supply Post Western Canada Edition · supplypost.com

April 2016

UNMATCHED EXCELLENCE SINCE 1944

WE UNDERSTAND YOUR TRANSPORTATION REQUIREMENTS BUILT IN CANADA , MADE FOR CANADIANS

 

EXPERIENCE AND KNOWLEDGE OF FORESTRY & HEAVY HAUL YOU CAN DEPEND ON !

IN STOCK TRAILERS - CALL FOR DETAILS

TOLL FREE: 866-657-2662 | info@peerless.ca

FOR ALL YOUR LOGGING PARTS NEEDS

 FULL LINE OF PARTS  LONGWOOD & SHORTWOOD BUNKS IN STOCK  CABGUARDS IN STOCK

MARK BARILLARO: parts@peerless.ca | 250-460-0948

www.peerless.ca