Page 1

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER · SUPPLYPOST.COM

VOL. 48 · NO. 9

Family Owned Since 1971

Scan for more info

SEPTEMBER 2019

Advertiser’s Index 6 | Section Two 33 | Classifieds 41 | Section Three 49 | Truck Photo Ads 62 | Publications Mail Agreement #40070144

2014 VOLVO A40G

2019 NEW HOLLAND E17C

2017 HYUNDAI HL940TM

Gravel pit and rock quarry for sale, equipment included. See page 46 for more details.

6,600 Hrs., Box Heater, Tailgate, Rear Camera, Auto Grease, New Tires, Very Straight Truck, $375,000. See more info on Pg. 47.

Kubota T4 Final Diesel, Long Arm, Rubber Tracks, ROPS, 16" Dig Bkt, 5-yr. Lease - $540/ month (+HST). See Pg. 43 for more info.

Tool Master loader, 931 hrs, hyd. Q/C, elec/hyd joystick, 3 yd bucket, remote GPS. $144,900. See more on page 44.

CALL CHUCK AT 250-756-8532

MARCEL EQUIPMENT · 1-800-265-5747 sales@marcelequipment.com

DELTA POWER EQUIPMENT sales@deltapower.ca · 1-888-903-8772

KEVIN@SMARTCASTEQUIPMENT.COM 604-670-1471

BUSINESS OPP. ON VANCOUVER ISL!

ALYN EDWARDS

Hayes: King Of The West Coast

Berend Dessau and Arnie De Jong show their vintage Hayes heavy haulers at the BC Truck Museum in Cloverdale. See page 56

Heavy Equipment Part & Component Specialists

REBUILT. IN STOCK. READY TO SHIP. REGISTER TODAY for our 'REAL TIME' Parts Inventory Online: BRIKERS.COM/Register


Page 2

Supply Post · supplypost.com

RENTALS

SALES

September 2019

CONTRACTING

SALES & RENTALS: Dave 778-855-4190 dave@unitedearthcontractors.com OFFICE: 604-940-0001 | Fax 604-940-0005

$100,000

$59,000

1 of 2 - JD 450D, thumb, guarded, catwalks, 2 buckets 12K hours.

JD 350D, thumb, guarded, catwalks, 12K hours.

$110,000

$83,000

2003 CAT 140H MOTOR GRADER 9,200hrs, tires at 90% plus. This is one great unit and ready to work.

LOW PRICE 2011 CAT 160M MOTOR GRADER 13,000 hrs, tires at 85% and machine is ready to work.

$100,000 ea.

$73,000

CAT 980G LOADER Well maintained unit with approx. 20,000 hrs. Matched Bridgestone tires, approx. 65%.

$195,000

$250,000

1 OF 2 UNITS AVAILABLE. 2007 KOMATSU HM 300-2 Approx. 9000-10000 hrs on easch. Good runners, ready to work.

$88,000

$40,000

2014 VOLVO A30F 80% tires, 750/65R25 wise tires, rear camera, approx. 9,000 hours and ready to work. (1 of 2)

D L SO

VOLVO A35 good runner, tires OK, ready to work.

$74,000 ea.

2 LEFT! 1 OF 2 VOLVO A25C, All in good condition and ready to work Very very clean units.

$75,000

$145,000

NEW U/C 2013 JD 350G GP & dig bucket, U/C 90%, pads look new. Only 4,600 hrs! This machine is new! New catwalks.

$37,000

2002 VIBROMAX PADFOOT ROLLER Cab, heat, clean unit, 8,000 hrs.

JOHN DEERE 240D 8,200 hrs, W/B lugging and Q/C, new U/C, Good runner and ready to work.

2008 CAT D6T 6 WAY DOZER A/C, diff steer, SystemOne U/C, ripper and forestry pkg avail. hard nose and front end all rebuilt. Great unit, only 14,000 hrs. Min. hrs on rebuilt engine.

$42,000

$39,000

2008 BOMAG SMOOTH DRUM ROLLER Bolt-on pad foot option. Clean machines and ready to work. Cab, A/C.

2004 INGERSOLL-RAND SD 116DX SMOOTH DRUM ROLLER Cab, A/C, and ready to work. Very clean unit.

2005 D6R XL U/C 75% good runner, well maintained and ready to work.

STARTING AT

$75,000

VOLVO A30D ROCK TRUCKS Wide selection with ranging hours all ready to work.

FIND MORE AT UNITEDEARTHCONTRACTORS.COM


September 2019

Supply Post · Our Readers Are Your Buyers

Page 3

4204 42 Ave., Innisfail, AB

CALL TODAY! 1-844-470-4608

2014 VOLVO MC115C SKID STEER, STK #2389, Enclosed Cab, (Volvo) Diesel, Heat/Air, Aux. Hydraulics, Q/C, ISO/H Pattern Control, 74 HP, 2,700lb Lift, 882 Hrs ..................................................................................................$43,000.

2014 CATERPILLAR 246D SKID STEER, STK #1627, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Q/C, Positive Air Shutoff, 74HP, 2,150lb Lift Capacity, Counter Weights, 954 Hrs .................................................................................$42,500.

2014 CATERPILLAR 262D SKID STEER, STK #1676, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Q/C, Positive Air Shutoff, 74HP, 2,700lb Lift Capacity, Counter Weights, 1,983 Hrs .............................................................................$45,000.

2014 BOBCAT S550 SKID STEER, STK #2353, Enclosed Cab, (Kubota) Diesel, Heat/Air, Aux. Hydraulics, Hand/Foot Controls, 61 HP, 1,750lb Lift, 3,631 Hrs ..........................$29,500.

2005 PETTIBONE T8044 TELEHANDLER, STK #2098, 4WD, (Cummins) Diesel, Open Cab, Quick Connect, Frame Tilt, 44’ Lift Hgt., 36’ Horz. Reach, 8,000lb Lift, 7,206 Hrs..........................................................................................$36,500.

2012 JCB 550-170 TELEHANDLER, STK #2253, 4WD, (JCB) Diesel, Block Heater, Encl. Cab, Heat, Fan, 100 HP, Aux. Hyd., 55’ Lift Hgt., 41’ Horz. Reach, Frame Tilt, 3-Way Steering, 47” Forks on a 64” Tilt Carriage, 10,000lb Lift, 7,740 Hrs ................................................................................................$66,500.

2007 SKYTRAK 8042 TELEHANDLER, STK #2312, 4WD, (Cummins) Diesel, Enclosed Cab, Heat, 100 HP, 42’ Lift Hgt., 26’ Horz. Reach, Positive Air Shutoff, Frame Tilt, 3-Way Steering, 8,000lb Lift, 7,740 Hrs......................................$42,500.

2012 XTREME XR1255 TELEHANDLER, STK #2345, 4WD, Enclosed Cab, (Perkins) Diesel, Block Heater, Heat, Fan, Aux. Hyd., 55’ Lift Hgt., 38’ Horz. Reach, 3-Way Steering, Frame Tilt, Outriggers, Pos. Air Shutoff, Counter Weights, 12,000lb Lift, 2,005 Hrs ..........................................................................$117,500.

2010 JCB 550-140 TELEHANDLER, STK #2348, 4WD, (JCB) Diesel, Enclosed Cab, Heat, Fan, Aux. Hyd., 100 HP, 44” Lift Hgt., 31” Horz. Reach, 3-Way Steering, Frame Tilt, Outriggers, 10,000lb Lift, 6,398 Hrs ......................................................$64,500

2011 VOLVO BL70 BACKHOE, STK #2309, (Volvo) Diesel, 4WD, Enclosed Cab, Heat, Air, Aux. Hyd., Outriggers, Extend-A-Hoe, 94HP, 92” Frt. Bkt., 21” Rear Dig Bkt., 14’ Dig Depth, 3,127 Hrs ................................................................$56,500.

2 MORE AVAILABLE! 2012 GENIE S65 STRAIGHT BOOM LIFT, STK #2289, 4WD, (D) Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, 8’ Platform, PAS, Foam Filled Tires, 500lb Lift, 3,718 Hrs...................................$68,500.

2012 GENIE S65 STRAIGHT BOOM LIFT, STK #2290 – 4WD, (Deutz) Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, 8’ Platform, Positive Air Shutoff, Foam Filled Tires, 500lb Lift, 4,878 Hrs..............................................$66,500.

2015 WACKER NEUSON ST35 SKID STEER, STK #2392, Enclosed Cab, (Perkins) Diesel, Heat/Air, Aux. Hydraulics, 2-Spd., Q/C, 74 HP, ISO, 78” Tooth Bkt., 2,450 lb Lift, 1,943 Hrs ..............................................................................$41,500.

2013 KUBOTA SVL75 SKID STEER, STK #2386, Enclosed Cab, (Kubota) Diesel, Heat/Air, 2-Spd., Aux. Hyd., Q/C, Hi-Flow, Hand Control, 74 HP, 72” Smooth Bkt., 3,285lb Lift, 3,478 Hrs ................................................................................$38,000.

2017 CATERPILLAR 279D SKID STEER, STK #2223, Enclosed Cab, (CAT) Diesel 3.3L, Heat, Air, 2-Speed, Aux. Hyd., Quick Connect, Ride Control, Hand/Foot Control, 72HP, 3,000lb Lift, 870 Hrs .........................................................................$77,500.

2005 CAT 287B SKID STEER, STK #2134, Enclosed Cab, (CAT) Diesel, Heat/Air, Aux. Hydraulics, Quick Connect, Hand Control, 81 HP, 3,597lb Lift, Hours Unknown ..................$32,500.

2016 TEREX TC16 MINI EXCAVATOR, STK #2383, (Kubota) Diesel, Enclosed Cab, Heat, 2-Spd., Counter Weights, ISO Control, 18 HP, 17” Tooth Bkt., 53” Blade, 273 Hrs ..................................................................................................$23,500.

1998 LINK-BELT 2800 QUANTUM EXCAVATOR, STK #2192, Enclosed Cab, Heat/Air Conditioning, (Isuzu) Diesel, 32” Tracks, 35” Tooth Bucket, 11,042 Hrs..........................$44,500.

2006 DOOSAN DAEWOO 225 LCV EXCAVATOR, STK #2234, Enclosed Cab, (Doosan) DB58TIS Engine, Heat, 40” Digging Bucket , Frost Tooth Bucket, 31.5” Tracks, 14,558 Hrs..........................................................................................$50,000.

2010 JOHN DEERE 35D MINI EXCAVATOR, STK #2390, (Yanmar) Diesel, Enclosed Cab, Heat/Air, Block Heater, 29 HP, 2-Spd., Aux. Hydraulics, Hyd. Thumb, 22” Tooth Bkt., 68” Blade, 3,899 Hrs ...................................................................$32,500.

2013 JOHN DEERE 544K WHEEL LOADER, STK #2359, Enclosed Cab, (John Deere) Diesel, Heat, Air, Aux. Hydraulics, 176 HP, 108” Bucket, 15,428 Hrs...........$72,500.

2009 CASE 1221E WHEEL LOADER, STK #2351, Enclosed Cab, (Cummins) Diesel, 4-Speed, Heat, Air, Ride Control, Emergency Steering, 335HP, 132” Bucket, 7,340 Hrs...................................................................................... $131,500.

2013 CASE 721F WHEEL LOADER, STK #1976, Enclosed Cab, (FPT) Diesel, Heat, Air, Pro-Heat, 3rd Valve, 118” Bucket, 180HP, 6,720 Hrs ...................................................................... $110,000.

2010 VOLVO L90F WHEEL LOADER, STK #2313, Enclosed Cab, (Volvo V-ACT 6 Cyl.) Diesel, Block Heater, Air Filled Tires, Heat/Air, Aux. Hyd. Plumbed, Q/C, 102” Smooth Bkt., 172 HP, 15,098 Hrs ....................................................$59,500.

FOR COMPLETE INVENTORY www.groundhogsales.com


Page 4

Supply Post · supplypost.com

September 2019

NO TIME. TOUGH JOB. LET’S GO.

MEET DEADLINES HEAD-ON. CONTACT YOUR LOCAL DEALER TODAY. Doosan® and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © 2019 Doosan Infracore North America, LLC. All rights reserved.

Authorized Doosan Dealers

british Columbia DOOSAN of the Peace 250-785-1197

dealer.doosanequipment.com/Fort-St.-John

alberta

Brown’s Industrial Sales 780-875-2339

dealer.doosanequipment.com/Lloydminster

Westerra Equipment 604-850-7313

DOOSAN of the Peace 780-538-0791

250-314-3600

saskatchewan

dealer.doosanequipment.com/Abbotsford

dealer.doosanequipment.com/Grande-Prairie

250-716-0443

Bobcat of Regina, Ltd. 306-347-7600

Williams Machinery 250-563-0181

Earthworks Equipment Corporation 306-931-7880

dealer.doosanequipment.com/Kamloops dealer.doosanequipment.com/Nanaimo

dealer.doosanequipment.com/Prince-George

dealer.doosanequipment.com/Regina

dealer.doosanequipment.com/Saskatoon

manitoba

yukon

dealer.doosanequipment.com/Springfield-MB

dealer.doosanequipment.com/Whitehorse

AGCON Equipment 204-255-4772

Doosan of Whitehorse 867-633-4426

new brunswick

Paul Equipment and Sons 506-826-3289

dealer.doosanequipment.com/Balmoral

quebec

Équipements plannord Beloeil 450-464-8000 plannord.com

Saint-Augustin-de-desmaures 418-878-4007 plannord.com

nova scotia

Nova International Limited 902-847-3468

dealer.doosanequipment.com/Aylesford

Northwest territories Ron’s Auto Service Ltd. 867-766-6025

dealer.doosanequipment.com/Yellowknife

Ontario

G f preston sales & service 705-384-5368

dealer.doosanequipment.com/Sundridge

hartington equipment 613-372-2744

Bobcat of hamilton LTD. 905-643-3177

dealer.doosanequipment.com/Hartington

c g equipment 519-826-0550

dealer.doosanequipment.com/Timmins

dealer.doosanequipment.com/Stoney-Creek

dealer.doosanequipment.com/Guelph

519-236-4934

readyquip sales & service ltd. 705-268-7600 stratton equipment company 807-483-7777 dealer.doosanequipment.com/Stratton

dealer.doosanequipment.com/Zurich

eastrock equipment inc. 613-737-3963

dealer.doosanequipment.com/Ottawa

902-798-9544

dealer.doosanequipment.com/Windsor

doosanequipment.com


September 2019

Supply Post · Our Readers Are Your Buyers

Page 5

Never Settle.

Get More, Do More When you need to move dirt and rock quickly, you need our R 936 crawler excavator. Advanced electronics let drive components work together efficiently to save fuel. Sensor-guided controls give you speed, precision and power. And robust cast steel components stand up to the toughest environments. It’s all built to last with exclusive Liebherr components. For more information, contact us at 1-800-387-3922. “We haven’t compromised on anything; why should you?”

Liebherr-Canada Ltd. 1015 Sutton Drive, Burlington, Ontario L7L 5Z8 Phone: +1 905 319 9222 E-mail: info.lca@liebherr.com www.facebook.com/LiebherrConstruction www.liebherr.ca

2037-502_017 LFR_121_R936_US-Markt_SupplyPost_CAN_GB.indd 1

23.03.17 12:08


Page 6

Supply Post · supplypost.com

RIVERSIDE EQUIPMENT RENTALS LOCALLY OWNED AND OPERATED

WE RENT

September 2019

ADVERTISERS INDEX Alberta Engine ................... 45 Destec .............................. 12 Jade Equipment .................. 1 Ramsey Co. ....................... 28 Amix Group ....................... 43 Dolphin Mechanical ........... 42 K-Line Trailers ................... 54 Ritchie Bros....................... 20 Arrow-West ........................ 26 Doosan ............................... 4 Kubota .............................. 15 Riverside Equipment ............ 6 Banning Equipment ........... 42 Earth First Logging ............. 12 Langley Excavator Parts ..... 15 River Valley Contracting ..... 14 B & G Parts ....................... 38 Edmonton Trailer ............... 50 Liebherr .............................. 5 Bison Iron ........................... 9 Elrus ................................. 40 LNH Equipment ................. 43 Bob’s Diesel ...................... 42 Equip. Sales & Serv........... 11 Lonetrack Equipment ......... 37 BPT Parts .......................... 10 FLO Components ............... 25 LSW Wear Parts ................. 28 Brandt...................16, 17, 31 Foreman Equipment .......... 33 Magnum Attachments........ 35

RLC Aggregate ................... 36 Rollins .............................. 24 Rototilt .............................. 29 Royquip ............................ 44 Saratoga Ventures ............. 21

Brandt Truck Rigging .......... 51 ForesTech Equipment ........ 22 Marcel Equipment ............... 8 Sexsmith Used Farm Parts . 43 Brandt Value Parts....... 22, 45 Frontier Power Products ..... 36 Merlin Gise ........................ 45 Shiloh Enterprises ............. 22 Brikers ................................ 1 Frontline Machinery ........... 41 Mormak ............................ 39 Skreenquip........................ 34 Brown International ........... 43 Gear Centre ....................... 39 Morooka ........................... 27 Trak Tech........................... 13 Brutus Truck Bodies ........... 19 General Aggregate ............. 38 Nor Mar............................. 19 Trans East Trailer ............... 55 C. E. Heathcote ................. 46 Groundhog Sales & Rentals . 3 Norstone Excavating .......... 30 Chieftain Equipment .... 37, 47 Groundworx ....................... 35 Ocean Trailer ..................... 64 Coastal Pacific Equipment . 46 Handlers Equipment .... 25, 26 Pacific Rim Equipment......... 7 COFS ................................ 30 Hope Mechanical .............. 46 Pacific Truck & Equip. ........ 13 ConExpo............................ 61 H & R Construction Parts ... 20 Peerless ............................ 53 Continental Equipment ...... 18 Hultdins ............................ 14 PM Industries .................... 52

True North Equipment ........ 46 Tyalta ................................ 48 United Earth Contractors ...... 2 Vanderveldt Parts ................ 8 Van-Ed Equipment ............. 12

Crawler Sales .................... 24 Inland Equipment .............. 23 Premium Truck ......58, 59, 60 VI Equipment..................... 10

DOZERS

CWB National Leasing ....... 21 Inland Group ..................... 32 Prince George Truck ........... 44 Wally’s Private Parts .......... 45 Darby Mfg. ........................ 11 Interior Diesel .................... 35 Prolenc ............................. 54 Westerra ........................... 24 Dendoff Springs ................ 20 Interquip Rentals ............... 18 P & R Truck Centre ............ 49 Wyatt’s Used Equipment .... 44

NEXT DEADLINE: Friday, September 20, 2019

Scan for more info #105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5

www.supplypost.com

PHONE 604-607-5577 | TOLL FREE 1-800-663-4802

2014 CAT D6K LGP Articulating Trucks ■ Excavators with Hammers & Hoe Pacs Compactors ■ Dozers 2D / 3D TRIMBLE READY ■ Wheel Loaders ■ Swamp Pads

For Rentals – Call Daryl · 604-309-3980 daryl@riversideequipment.com For Sales – Call Ernie · 604-854-0583 ernie@riversideequipment.com 3112 Pratt St., Abbotsford, BC V2S 3C7 Phone 1-800-556-0557 • Fax 604-556-0559

www.riversideequipment.com

President ........................................... Jeff Watson

Marketing Administration ................... Sheryl Kaye

Account Manager ............................Jake Peterson

Art Director/Social Media ................... Linda Horn

Account Manager ......................Shantal Saunders

Web & Graphic Designer ..................Lisa Schmale

Managing Partner, Finance ............ Debra Watson

CIRCULATION

Direct Mailed copies .............. 22,300 Newsstand copies .................... 6,000 Total distribution .................... 28,300 Please call our office for full details

Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.

The Supply Post is a proud member of the following Trade Associations:

INTERIOR LOGGING ASSOCIATION

RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only) No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5


September 2019

Supply Post · Our Readers Are Your Buyers

Page 7

Phone: 250-493-4545 Fax: 250-493-8819 AFTER HRS, Joe Hewer: 250-490-6795 AFTER HRS, Dave Garnett: 250-490-7976

1698 Dartmouth Rd, Penticton, BC V2A 4B8

RENT OR RENTAL PURCHASE AVAILABLE $34,900

2013 YANMAR VIO35-6A RUBBER, CAB AIR, HYD. THUMB, 2 BUCKETS, 3,312 HRS. YANMAR EXCAVATORS

(2) NEW YANMAR SV08-1B CANOPY, RUBBER 14" BKT, 2'3"-2'9" WIDE ................. CALL (3) NEW YANMAR VIO17-A CANOPY, Q/C, 2 BKTS, HYD THUMB .............................. CALL 2018 YANMAR VIO25-6A RUBBER, CAB, HYD THUMB, 2 BKTS, 526 HRS................ CALL (5) NEW YANMAR VIO35-6A CAB AIR, RUBBER, HYD THUMB, 2 BKTS .................... CALL NEW YANMAR VIO35-6A CAB AIR, RUBBER, ANGLE BLADE ..................................... CALL NEW YANMAR VIO35-6A CAB AIR, RUBBER, ANGLE BLADE, 2 BKTS, HYD THUMB .. CALL (5) NEW YANMAR VIO35-6A RUBBER, CANOPY, HYD QC, DIG BKT........................... CALL NEW YANMAR VIO50-6A STEEL, CAB AIR, ANGLE BLADE, HYD THUMB .................. CALL (4) NEW YANMAR VIO50-6A RUBBER, CAB AIR, HYD THUMB, DIG BKT ................... CALL NEW YANMAR VIO50-6A RUBBER, CAB AIR, HYD Q/C, DIG BKT .............................. CALL NEW YANMAR VIO50-6A CAB AIR, STEEL TRACKS, HYD Q/C, DIG BKT .................... CALL (4) NEW YANMAR VIO55-6A CAB AIR, RUBBER TRACKS, HYD Q/C, DIG BKT ........... CALL 2018 YANMAR VIO80-1A CAB AIR, STEEL, HYD THUMB, AUX HYDS ........................ CALL NEW YANMAR VIO80-1A STEEL BOR, BLADE,HYD THUMB, 2 BKTS ........................ CALL NEW YANMAR VIO80-1A STEEL, CAB AIR, BLADE, HYD Q/C, DIG BKT ..................... CALL 2017 YANMAR SV100-2A CAB AIR, STEEL PADS, HYD THUMB 2 BKTS, 870 HRS.... CALL NEW YANMAR SV100-2A CAB AIR, STEEL, HYD THUMB, DIG BKT........................... CALL (4) NEW YANMAR SV100-2A CAB AIR, STEEL, HYD Q/C, DIG BKT........................... CALL NEW YANMAR SV100-2A CAB AIR, RUBBER TRACKS ............................................ CALL

EXCAVATORS

2005 HITACHI ZX75US-A 18" PADS, AIR, BLADE, 3,285 HRS.................................. CALL 2008 HITACHI ZX75US-3 18" PADS, AIR, Q/C BUCKET, 4,902 HRS.......................... CALL 2010 HITACHI ZX75US-3 18" BOR, A/C, BLADE, Q/C HYD THUMB, ONLY 1,359 HRS... CALL 2015 CAT 308E2 CR 18" BOR, AIR, BLADE,ONLY 102 HOURS ............................. $96,900 2015 CAT 308E2 CR 18" BOR, AIR, BLADE, PIPING, ONLY 812 HRS ......................... CALL 2016 CAT 308E2 CR 18" BOR, AIR, BLADE, ONLY 700 HRS ..................................... CALL 2016 KOMATSU PC78US-10 18" BOR, L.ARM, Q/C, HYD THUMB, ONLY 558 HRS ............. ......................................................................................................................... FOR RENT 2014 CAT 311FL RR 20" PADS, BOLT ON RUBBER, ONLY 1,262 HRS ...................... SOON 2015 CAT 311FL RR 28" PADS, Q/C, HYD THUMB, ONLY 536 HRS, L/ARM .............. CALL 2010 CAT 312D 20" PADS, HYD Q/C & THUMB, L.ARM, 2,815 HRS ......................... CALL 2011 HITACHI ZX120-3 20" PADS, AIR, ONLY 4,220 HRS ....................................... CALL 2014 HITACHI ZX120-5B 20" PADS, AIR, Q/C, DIG BKT, ONLY 2,240 HRS................ CALL 2014 CAT 312E L 20" PADS, AIR, HYD Q/C.............................................................. SOON 2014 CAT 312E 20" PADS, AIR, ONLY 1,008 HRS .................................................... CALL 2016 CAT 312F 20" PADS, AIR, ONLY 576 HRS ....................................................... CALL 2018 CAT 312F 20" PADS, BLADE, PIPING, ONLY 984 HRS ...................................... CALL 2013 KOMATSU PC138USLC-8 28" PADS, Q/C, DOZER BLADE, PIPING, 8,372 HRS .......... ............................................................................................................................ $69,900 2002 HITACHI ZX135US 20" PADS, QUICK CHANGE, DIG BKT, 13,713 HRS ......... $38,500 (5) 2005 HITACHI ZX135US 20" PADS, AIR, DIG BKT, 5,732 - 7,983 HRS................ CALL 2008 HITACHI ZX135US-3 20" PADS, Q/C DIG BUCKET, 10,950 HRS .................. $41,900 2008 HITACHI ZX135US BLADE, 2 BKTS, HYD THUMB, CABGUARD, 6,468 HRS ...... CALL 2010 HITACHI ZX135US-3 20" PADS, AIR, BLADE, 7,231 HRS ................................ CALL 2010 HITACHI ZX135US-3 20" PADS, AIR BLADE, 6,557 HRS ................................. CALL 2011 HITACHI ZX135US-3 20" PADS, AIR, ONLY 4,333 HRS ................................... CALL 2011 HITACHI ZX135USK-3 20" PADS, AIR, Q/C, HYD THUMB, ONLY 4,134 HRS ..... CALL 2011 HITACHI ZX135US-3 28" PADS, AIR, BLADE, 4,685 HRS ................................ CALL 2013 HITACHI ZX135US-3 28" PADS, AIR, L/A, ONLY 1,672 HRS ............................ CALL (7) HITACHI ZX135US-3 2 BUCKET Q/C, HYDRAULIC THUMB ........................... FOR RENT (3) 2011 HITACHI ZX135USKBL-3 Q/C, HYD THUMB, DOZER BLADE ............... FOR RENT 2017 DEERE 135G 28" PADS, AIR, BLADE, Q/C, HYD THUMB ........................... FOR RENT 2014 CAT 314E CR 20" PADS, Q/C, HYD THUMB, ONLY 2,150 HRS ................... $136,900 2016 CAT 314E LCR 24" PADS BOR, Q/C, HYD THUMB, ONLY 561 HRS .... SALE OR RENT 2012 HITACHI ZX160LC 24" PADS, AIR, HYD Q/C, PRO LINK THUMB, 8,900 HRS,2 BKTS, CABGUARD, CATWALKS, SWIVEL GUARD, ............................................................... CALL 2016 HITACHI ZX180LC-6N 32" PADS, AIR, ONLY 2,602 HOURS ............................ SOON 2013 CAT 316E L 28" PADS, AIR, Q/C HYD THUMB, 2,342 HRS ......................... $159,900 2011 CAT 319DL 32" PADS, AIR, Q/C 36" BUCKET, AUX HYDS ............................ $49,900 2010 CAT 320D RR 32" PADS, AIR, ONLY 4,800 HRS .......................................... $91,900 2015 CAT 320E RR 24" PADS, AIR, AUX PIPING, ONLY 1,777 HRS ........................... CALL 2013 KOMATSU PC200-10 24" PADS, AIR, AUX PIPING, ONLY 2,876 HRS ............... CALL 2004 HITACHI ZX200LC 32" PADS, A/C, PIPING, ONLY 4,225 HRS .......................... CALL 2011 HITACHI ZX200LC-3 32" PADS, AIR, Q/C, HYD THUMB, AUX HYD, 9,360 HRS, CATWALKS, CABGUARD .......................................................................................... CALL 2012 HITACHI ZX210LC-3 28" PADS, AIR, Q/C, HYD. THUMB, 2,868 HRS ......... $169,900 2013 HITACHI ZX210LC-3 28" PADS, AIR, PIN GRABBER, HYD THUMB, 4,342 HRS ........... .......................................................................................................................... $119,900 2014 HITACHI ZH200-5B 32" PADS, AIR, HYBRID MACHINE, ONLY 1,765 HRS ........ CALL 2014 HITACHI ZX210LC-5N 24" PADS, AIR, Q/C, HYD THUMB, ONLY 2,680 HRS $174,900 2004 HITACHI ZX225US 24" PADS, AIR, Q/C, 36" DIG, 11,765 HRS .................... $33,900 2006 HITACHI ZX225US-3 24" PADS, AIR, 7,596 HRS ............................................ CALL 2011 HITACHI ZX225USR-3 24" PADS, AIR, ONLY 6,170 HRS ................................. CALL 2012 DEERE 225D LC 32" PADS, AIR, HYD Q/C, 4,800 HRS, AUX HYDS............. $109,900 2017 DEERE 245G LC 32" PADS, AIR, HYD THUMB,2 BKTS Q/C, 1,667 HRS ............ CALL 2018 KOMATSU PC200LC-8 32" PADS, A/C, Q/C, HYDRAULIC THUMB ............. FOR RENT NEW HITACHI ZX200LC-5 24" PADS, AIR COND, 2 BUCKETS & Q/C, 225 HRS . FOR RENT (6) DEERE 245G LC 32" PADS, 2 BKTS Q/C, HYDRAULIC THUMB ......................FOR RENT (6) DEERE 245G LC 32" PADS, 2 BKTS,Q/C, HYD THUMB, CABGUARD .......... FOR RENT 1996 HITACHI EX220-3 Q/C, HYD THUMB, 66" CLEAN UP, CABGUARD, 10,588 HRS ......... ............................................................................................................................ $22,500 2008 KOMATSU PC220LC-8 32" PADS, AIR, Q/C, HYD THUMB, ONLY 4,750 HRS .... CALL 2012 HITACHI ZX290LC-5N 32" PADS, AIR, HYD THUMB, Q/C, 6,689 HRS, AUX HYDS ROCK GUARDS, FRONT WINDOW GUARD ONLY 3,502 HOURS .................................. CALL

Authorized Dealer

$159,900

$119,900

2012 HITACHI ZX130LC-5N 24" PADS, AIR, Q/C, HYD THUMB, ONLY 1,990 HRS. 2012 HITACHI ZX350LC-5N 32" PADS, AIR, Q/C, PRO LINK THUMB, ONLY 5,032 HRS .. CALL 2012 HITACHI ZX350LC-5N 32" PADS, AIR, ONLY 6,228 HRS, DIG BKT................... CALL (3) 2018 DEERE 345G LC 32" PADS, AIR, HYD THUMB, Q/C, CABGUARD .......... FOR RENT NEW HITACHI ZX330LC-5 24" PADS, AIR, HYD THUMB, B/NEW ....................... FOR RENT 2014 CAT 336E L QUICK CHANGE, 2 BUCKETS, ONLY 4,345 HRS ............................ CALL 2013 KOMATSU PC360LC-10 32" PADS, AIR, Q/C HYD THUMB, CAGUARD, 3,260 HRS ..... ......................................................................................................................... $229,900

DOZERS

2014 KOMATSU D39PX-22 6 WAY, CAB AIR, ONLY 1,933 HRS, MS RIPPER(D5K SIZE) ....... ......................................................................................................................... FOR RENT 2015 CAT D6K2 XL 6 WAY, CAB AIR, MS RIPPER, ONLY 1,573 HRS .......................... CALL 2005 CAT D7R XR SII DAT BLADE, A/C CAB, D/STEER, RIPPER, 8,068 HRS, NEW CAT UNDERCARRIAGE, OIL SAMPLES, WORK ORDERS .............................................. $244,900 2011 KOMATSU D65WX-17 6 WAY DOZER, CAB AIR, MS RIPPER ............................ CALL 2014 KOMATSU D65PX-17 6 WAY DOZER, MS RIPPER, SWEEPS, ONLY 3,500 HRS........... ......................................................................................................................... FOR RENT 2013 CAT D6T XW 6 WAY DOZER, MS RIPPER, ONLY 3,780 HRS ............................. CALL

LOADERS, SKID STEERS

NEW YANMAR V4-7 CAB AIR, HYD Q/C, .85CU YD BKT/FORKS, 144 HRS ................ CALL 2010 DEERE 310J 4X4, EXTENDAHOE, CAB, ONLY 2,539 HRS ................................ CALL 2013 CAT 930K 20.5R TIRES, HYD COUPLER, 3.8 CU YD GP BKT, 6,617 HRS........... CALL 2014 KOMATSU WA320-7 20.5R25 TIRES, HYD Q/C,R/C,RVC, 3,298 HRS .............. CALL (2) NEW KOMATSU WA250PZ-6 20.5R TIRES, HYD COUPLER, E/S,3 YD BKT/FORKS ........ ......................................................................................................................... FOR RENT NEW KOMATSU WA320PZ-6 20.5R TIRES, HYD COUPLER, E/S, 3.5YD BKT/FORKS ........... ......................................................................................................................... FOR RENT 2015 CAT 950K 23.5R TIRES, A/C, R/C, E/S, 4.32YD BKT, ONLY 2,820 HRS ...... FOR RENT (2) 2014 BOXER 320 RUBBER TRACKS, AUX HYD, 34" BKT, 591 -762 HRS ......... $10,900 2016 BOBCAT MT55 MINI LOADER, ONLY 149 HRS 44" BKT ........................... FOR RENT 2012 BOBCAT T190 CANOPY, 1,915 HRS......................................................... FOR RENT 2015 BOBCAT T590 CAB AIR, SJC CONTROLS, 428 HRS.................................. FOR RENT NEW BOBCAT T650 CAB AIR, STD CONTROLS, PWR BOBTACH, 74" BKT...........FOR RENT 2009 BOBCAT S70 CAB, Q/C BKT, ONLY 1,541 HRS ......................................... FOR RENT 2012 BOBCAT S70 CAB , Q/C BKT, AUX HYD, 1,165 HRS ......................................... CALL 2013 BOBCAT S530 CAB, HYD Q/C, AUX HYD,2 SPEED, 869 HRS ..................... FOR RENT 2014 BOBCAT S590 HYD Q/C,A/C CAB, 2 SPEED, 838 HRS ..................................... CALL 2015 BOBCAT S590 HYD Q/C, A/C CAB, 2 SPEED, 487 HRS .................................... CALL NEW BOBCAT S590 CAB AIR, STD CONTROLS, 68" BKT .................................. FOR RENT 2013 BOBCAT S650 2 SPEED, HI FLOW, HAND/FOOT, A/C CAB, 1,505 HRS ...... FOR RENT 2014 BOBCAT S650 CAB AIR, HAND/FOOT, ONLY 2,511 HRS................................... CALL 2012 BOBCAT S850 A/C CAB, 84" BKT, 2 SPEED, 2,548 HRS................................... CALL

GRADERS / COMPACTORS

1998 CAT 140H 17.5R TIRES, 14' MB, A/C CAB, MS RIPPER, 8,500 HRS ................. CALL (2) NEW CORNIVER CT40S 40" SMOOTH DRUM, KUBOTA ENG ....................... FOR RENT (2) NEW CORNIVER CT48S 48" SMOOTH DRUM, KUBOTA ENG., 181 hrs......... FOR RENT 2008 VOLVO SD25D 41" DRUM DRIVE, CANOPY, 1,300 HRS ................................... SOON 2008 DYNAPAC CA134D 54" SMOOTH DRUM, 3,086 HRS.................................. $33,900 2008 VOLVO SD45D 54" DRUM, CANOPY, ONLY 426 HRS ...................................... CALL 2011 VOLVO SD45D TF 54" DRUM, PF SHELL KIT, 945 HRS ............................FOR RENT 2005 ING. RAND SD70D TF 66" SMOOTH DRUM/SHELL KIT, CANOPY ................ $38,900 2006 ING. RAND SD70D TF 66" SMOOTH DRUM, 1,773 HRS, CANOPY .................. CALL 2012 VOLVO SD70D 66" DRUM, CAB AIR, ONLY 2,528 HRS ................................... CALL (2) 2013 VOLVO SD75 66" SHELL KIT, CAB AIR................................................ FOR RENT 2014 SAKAI SV540D 84" SMOOTH DRUM, CANOPY, ONLY 470 HRS ................... $87,900 (2) 2014 SAKAI SV540TF 84" SMOOTH DRUM/PADFOOT SHELL KIT, CAB AIR .FOR RENT

SEPTEMBER SPECIAL $66,900

2013 VOLVO ECR305 CL 32" PADS, AIR, HYD Q/C,HYD THUMB, 2 BUCKETS.

DUMP TRUCKS

2013 CAT CT660L CAT C15 550HP, 18SPEED, AIR RIDE, 20K FRONT 46K REARS, 220" WB,ALUM WHEELS, K LINE 16'6" BOX, HL GATE,CERT............................................... CALL (3) 2018 CANYCOM SC75PD RUBBER, 1,655LB PAYLOAD, 35" WIDE, 180 DEGREE DUMP ..........................................................................................................................FOR RENT (2) 2018 CANYCOM S25A RUBBER, CANOPY, 180 DEGREE SWIVEL DUMP....... FOR RENT NEW YANMAR C30R-3 CANOPY C/W SWIVEL DUMP .............................................. CALL 2018 YANMAR C50R RUBBER, CAB, SWIVEL DUMP, 8,300LBS MAX CAPACITY FOR RENT 1999 KOMATSU CD60R-1 STEEL TRACKS, 360 DEGREE DUMPER, 7,160 HRS.... $44,900 2002 KOMATSU CD110R-1 RUBBER 360 DEGREE SWING DUMPER, 4,100 HRS ..... CALL 2012 VOLVO A30F 750/65R25 TIRES, RVC, HEATED, ONLY 5,360 HRS .................... CALL 2005 CAT 730 23.5 TIRES, TAILGATE, ONLY 5,674 ORIGINAL HRS ..................... $219,900 2011 CAT 730 23.5R25 TIRES, TAILGATE, ONLY 3,200 HRS .............................. FOR RENT 2012 VOLVO A30F 23.5 TIRES, RV CAMERA, EMERG STEER, 4,141 HRS .......... FOR RENT (3) 2019 KOMATSU HM300-5 23.5R TIRES, HTD BOX, BRAND NEW ................FOR RENT 2014 VOLVO A40F 875/65R29 TIRES, TAILGATE, EHB, ONLY 7,527 HRS ............ $214,900

LIFTS & LIFT TRUCKS

(2) 2013 DOOSAN G25E5 4,600LB FORKLIFT, DUAL FUEL, SS, 3 STAGE MAST ....... CALL 2018 GENIE GTH-5519 TELESCOPIC FORKLIFT, CAB, ROTATING CARRIAGE ...... FOR RENT 2007 CAT TL1055 10,000LB, 55', A/C CAB, TILT CARRIAGE, 5,004 HRS .............. $78,900 2012 JLG G1055A 10,000LB, 55' LIFT, CAB, HYD LEVELING, 4,448 HRS .......... FOR RENT 2008 JLG 12SP ELECTRIC PERSONAL LIFT, 12' BOOM, 21 HRS ............................$3,990 2018 GENIE GR12 ELEC PERSONAL LIFT, 12' VERT LIFT, 500LB CAP........ SALE OR RENT 2018 GENIE GL12 MATERIAL HANDLER, 12' MAST .................................. SALE OR RENT 2018 GENIE GR15 ELEC PERSONAL LIFT, 15' VERT LIFT, 500LB CAP ........ SALE OR RENT 2018 GENIE SLA15 MATERIAL HANDLER, 15' MAST ................................ SALE OR RENT (2) NEW GENIE GS1930 19' ELECTRIC SCISSORLIFT ....................................... FOR RENT (2) 2011 GENIE GS2632 26' ELECTRIC SCISSORLIFT, REMOTE, PWR TO PLATFORM, 212 HRS ............................................................................................................................ $14,900 2018 GENIE GS3369 RT 4X4, KUBOTA DIESEL, OUTRIGGERS, B/NEW .............. FOR RENT 2014 GENIE Z34/22 4X4, KUBOTA, 34' LIFT, 4' JIB .......................................... FOR RENT 2011 GENIE Z45/25J 4X4, DIESEL, 5' JIB, FF TIRES, 3,364 HRS ......................... $39,900 (3) 2012 GENIE Z45/25J 4X4, DIESEL POWER, JIB ..........................................FOR RENT 2014 JLG 450AJ 4X4, DUAL FUEL, 1,702 HRS ................................................. FOR RENT 2005 JLG 600AJ 4WD, DUAL FUEL, 4,008 HRS, GENERATOR, CERTIFIED ......... FOR RENT 2013 JLG 600AJ 4X4, DIESEL, PWR TO PLATFORM,FFT, 3,200 HRS ................. FOR RENT 2014 GENIE Z60/34 4X4, ART BOOM LIFT, DEUTZ............................................ FOR RENT

MISCELLANEOUS

2011 SULLIVAN D185P3JD 185CFM,125 PSIG, JD ENGINE, PINTLE HITCH, 2,003 HRS ................................................................................................................................. CALL 2006 JOHN DEERE 3320 33 HP, 4X4, HYDRO TRANS, TURF TIRES, REAR PTO, MID MOWER, 300CX LOADER, 3 PT HITCH, ONLY764 HRS ........................................................ $27,500 2000 FORD F650 CUMMINS PWR, 2,000 GAL, 19,699 MILES, 6 SPEED, A/C, PTO, FF-S-RR, HOSE REEL ......................................................................................................... $32,900 2008 FREIGHTLINER M2 220HP CUMMINS, 5 SPEED, 3" PUMP, FRS SPRAY, UNUSED 2,000 GALLON WATER TANK ............................................................................................. CALL

TRAILTECH TRAILERS ETC

2016 TRAILTECH L160T-14LP 14' LOPRO, S/AXLE, 6,000LB AXLE ....................... $4,990 NEW TRAILTECH L235HD-10 10' DUMP TRAILER, 2-3,500LB AXLES...................... CALL NEW TRAILTECH L270T-20 20' TILT DECK, 4' STATIONARY, 2 7,000LB AXLES, HD CPLR... ................................................................................................................................ CALL NEW TRAILTECH CELL270-20 2- 7,000LBAXLES, ELECTRIC BRAKES, 102" WIDE, 82.5" INSIDE FENDER, 20' DECK FLIP UP RAMPS ............................................................ CALL NEW TRAILTECH L270HD-14 14' HYD DUMP TRAILER, 2 7,000 LB BRAKING AXLES, 2 WAY GATE, HD BALL COUPLER, 16,100 GVWR I/O 14,000 ........................................... RENTAL NEW TRAILTECH L270HD-14 14' HYD DUMP TRAILER, 2 7,000 LB BRAKING AXLES, 2 WAY GATE, HD BALL COUPLER, 16,100 GVWR I/O 14,000 ............................................... CALL

ATTACHMENTS ETC

2007 CAT 735 26.5X25 TIRES, HEATED BED, 13,110 HRS.

NEW HITACHI/DEERE ZX350LC-5 21 METER (69') LONG REACH BOOM ARM TO FIT ZX350/ JD350 ................................................................................................................ $42,500 2017 V SERIES V145E 6,500 FT.LB BREAKER TO FIT 20 - 30 TON MACHINE .......... CALL 2012 RAMMER 4099 11,000 FT/LB HYDRAULIC BREAKER, FITS 350/450........... $63,900 JA-CO CAT 312 40" HYD TILTING FORKS OFF CAT 312, 72" CARRIAGE ................. $3,900 NEW HLA BOBCAT 77" STONE FORK RETAINER TINE BUCKET .................................. POR NEW HLA BR 84 84" HYD ANGLE ROTARY SWEEPER BROOM ................................... POR NEW HLA BOBCAT 7 PIN HLA BROOM WIRE KIT FOR BOBCAT .................................. POR NEW HLA BRB 72 72" ROTARY PICK UP BROOM, POLY STEEL BRUSHES .................. POR NEW HLA HD FORKS NEW 48" SKID STEER FORKS, 50" CARRIAGE, SLIDING, ADJUSTABLE, 4,200LB CAPACITY.................................................................................................. CALL

www.pacificrimequipment.com | sales@prequip.com


Supply Post · supplypost.com

September 2019

Industry’s First 18V Rechargeable Oil Pump In Canada VANDERVELDT EQUIPMENT PARTS LTD.

Providing New OEM Components with Huge Price Savings!

250-951-2082

We offer a large in-house selection of new OEM components for:  Hitachi  Deere  Case  Link-Belt  CAT  Kobelco

www. VeldtParts .com

FLO Components Ltd. is pleased to announce that, due to its leading position as a supplier of lubrication solutions, it has been selected to represent Macnaught in Ontario and Manitoba. Macnaught has been an expert manufacturer of world class grease, oil and fuel equipment, hose reels and positive displacement flow meters for the agricultural, automotive, industrial, mining and transport industries across the globe, since 1948. FLO’s first step is to introduce to the Canadian market, the Macnaught BOP20. The BOP20 is the world’s first industrialgrade, completely portable and rechargeable, 18V battery operated oil pump for five-gallon buckets. It is manufactured in Australia and designed specifically to improve workshop efficiency and reduce fatigue. “The BOP20 is an innovative, award-winning new product and has been very popular in vehicle service

ferred across multiple pump stems to reduce set-up costs and eliminate cross-contamination. According to Deckert; “The ‘on-demand’ flow nozzle allows full control over delivery of 40 Gallons of oil on a typical full charge at 1 GPM.” “At FLO Components, we provide turnkey solutions to take away our customers’ pain. The BOP20 is beneficial anywhere anybody has to transfer or dispense oil, in terms of accuracy, technician efficiency, reduced spills, increase safety and overall productivity. It’s a perfect product for us as it further enhances FLO Components’ ability to help customers protect their equipment and employees while improving productivity”, added Deckert. b

and industrial settings”, said Mike Deckert, VicePresident of FLO Components. “It’s ideal for small shops, remote locations, or on mobile applications as they no longer have to buy an air compressor in order to eliminate manual pumping. It replaces troublesome manual pumps and eliminates the messy practice of trying to pour oil directly from the bucket into smaller containers. With the flick of a button, it can dispense all types of hydraulic oil, gear oils to light weight oils, from 5-gallon containers.” The modular design of the BOP20 allows the powerhead to be trans- Source: FLO Components

The BOP20 is the world’s first industrial-grade, completely portable and rechargeable, 18V battery operated oil pump for five-gallon buckets.

PIPELAYER SALES - RENTALS - RENTAL PURCHASE Contact Mark or John: 1-800-265-5747 | sales@marcelequipment.com Ask About our Warranty!

CAT D7E LGP (2012) – 4858 Hours Choice of A blade or Straight with Tilt, Winch/Ripper or Drawbar Available, 36” Pads, 85% Remaining.

CAT 814F (2008) – 6869 Hours 29.5R25 Tires, U Blade, Very Clean Low Hour Unit. $235,000

Volvo A40G (2014) – 2 Units Available 6600 Hours, Box Heaters, Tailgates available, New Tires to be Installed, Rear Camera. Very Straight Trucks.

JOHN DEERE 700K/J LGP (2006-2012) 1028 – 6234 Hours, 40,000 LB. Lift, 24 Foot Booms, 30” Pads, Some with Blades, 17 Units Available.

CAT D8T LGP (2016) – 2 Units Available 7625-8195 Hours, CAT Dealer Maintained Since New, Cab Precleaners, AC, 38” Pads, CAT SU Blade with Tilt, Ripper Valve, Winch/Ripper or Drawbar Available.

KOMATSU WA500-8 (2018) 2540 Hours, Komatsu Warranty, Michelin tires, 6.75 CY Spade Bucket with Teeth, Auto-grease, Very Clean and Work Ready.

CAT 772 (2013) – 2 Units Available 4755-5135 Hours, 51 Ton, Block Heater, Tailgates, Heated Boxes, Autogrease, Cold Weather Arrangements, NEW Front Tires Installed.

CAT 980M (2014) 3552 Hours-1228 Idle Hours, 7.5 CY Bucket, CAT Dealer Maintained, Worked in Very Light Application.

View Complete Inventory at www.marcelequipment.com

FLO COMPONENTS

Page 8


September 2019

Supply Post · Our Readers Are Your Buyers

Page 9

CRUSHERS • SCREENERS • TROMMELS • STACKERS • WASHPLANTS

CALL 604-813-2424 | info@bisoniron.com | British Columbia & Alaska

2015 POWERSCREEN 1400 CHIEFTAIN, 2019 McCLOSKEY R70, 130 HP, CAT 2019 McCLOSKEY J50, 350 HP, 50” x 29” Jaw with Reversible Hydrostatic Drive 670 hrs, Cat C4.4 Eng., 2-deck, 11x5, Track Engine, 9’ x 4’ Screenbox, Hopper .........................................................POR Mounted, Remote Tipping Grid...$229,000 Extensions, Easy to transport ...$250,000

2016 KEESTRACK C4 EXPLORER 1500, 2,100 Hrs., Duetz Engine, Two Deck Screen, Exc Condition .....$175,000

2015 PORTAFILL 2000CT, 374 Hrs., Duetz Engine, Excellent - Like New Condition ..................................$100,000

2019 McCLOSKEY C44, CAT Engine, 44” Telsmith SBS, Hopper Extensions ...POR

2019 McCLOSKEY J45, 350 HP, CAT Engine, 45”x 27”Jaw, 42” Extended Conveyor .........................................POR

2019 McCLOSKEY J40, CAT Engine, 24”x40” Tracked Jaw, Side Conveyor, Magnet, Hopper Extensions ............POR

McCLOSKEY ST80, Kubota Engine, Diesel 2019 McCLOSKEY S190, 130 HP, 22011 McCLOSKEY R155, 5,500 Hrs., 127 2015 McCLOSKEY R155, CAT 130HP Hyd. Radial Conveyor, Hopper, Lights & Deck 20’ x 5’ Screening Plant, Screenbox HP, CAT, 16’x5’ Double Deck High Energy Engine, 16’x5’ High Energy Screen Box, Brakes, Choice of 6 units ............$65,000 Top Deck 5’ x 4’ Side Tension ..........POR Screen Box, Hopper Ext ...........$150,000 Hopper Extensions ..........................POR

2017 EZYSTAK W5030, 50’ Radial Hydraulic Conveyor (3 in-stock) ..$29,000

2018 McCLOSKEY ST80, Diesel Hydraulic Conveyor, CAT or Kubota Engine, 80’x36”................................POR

2016 McCLOSKEY 516RE, 100 HP, CAT Engine, Radial Fines .......................POR

2007 TEREX PEGSON XA400, 6,700 Hrs., CAT C9, Hyd. Adjust. Magnet, Side Belt, New Bearings and Shaft..........POR

2013 INTERNATIONAL PROSTAR, CVIC. New tires,

2019 McCLOSKEY S130, 14’X5’ Double Deck High Energy Screening Plant 100 HP (75 KW) Diesel Cat Engine........POR

2006 TEREX PEGSON 1180, PREMIERTRAK 3,950 Hrs., 32”x44” Heavy Duty Quarry Jaw, CAT C12 Engine ..........POR

McCLOSKEY ST100T, 90 HP, Kubota Eng, Remote Control Tracks, Hyd. Raise, Lower & Fold, 600tph 100’ x 36” ......POR

Good Brakes, full dealer service history, 466,074 kms, Location: Calgary.................................................Call

www.bisoniron.com | 604-813-2424 | 780-819-7433


Page 10

Supply Post · supplypost.com

Looking for

Parts?

BEC has one of the largest inventories of JCB Parts! Alternators ➔ Vales ➔ Glass ➔ Lights ➔ Filters ➔ Oils ➔ Pins ➔ Bushings ➔ Buckets ➔ Attachments ➔ Components ➔ Machine Overhauls

We rebuild JCB Transmissions, Axles, and Differentials Transmissions Dyno-Tested under load on our in-house dyno bench

➔ Even after paying freight we can save you up to 36% and more! ➔

Call 905-670-7678 Fax 905-670-7260 | www.becequipment.ca 1790 Bonhill Rd., Mississauga, ON L5T 1C8

September 2019

LNG Offers Massive Advantages For The Evolving Global Energy Mix If you have to burn a fossil fuel for power or heat, natural gas should be the first choice. Energy specialist Ian King makes the case for liquefied natural gas from British Columbia. Stop me if you’ve heard this one before: natural gas is a worse climate villain than coal. It’s a bridge fuel to nowhere. British Columbia should stop trying to become a supplier of liquefied natural gas to the rest of the world. It’s a familiar refrain, usually heard coming from green activists and the think tanks that support them. They’ll pump out occasional flurries of commentaries, flush with rhetoric and carefully picked factoids. At first glance, the arguments seem compelling — until you take a second look. Even from a distance, the arguments against LNG don’t hold up. If you haven’t the time to go deep, simply consider the fuels’ lifecycle emissions.

University of Calgary professor Adebola Kasulu and colleagues analyzed Canadian LNG using a variety of studies of natural gas’s emissions over its whole life cycle. They included emissions from drilling, production, shipping, to burner tip. In every case, LNG had a lower CO2 equivalent impact than coal. Even using the most pessimistic models, including one from a very harsh critic of natural gas, LNG had at least 25% fewer emissions. Most scenarios had much better results. So what goes into British Columbia’s LNG’s advantage? BC‘s initial LNG exports will be shipped from LNG Canada in Kitimat. Like all the world’s large LNG plants, it’ll use gas turbine power — but with major emissions advantages over its international peers. Industrial turbines’ thermal efficiency has increased close to 40% over

the last few decades. LNG Canada can take full advantage of those improvements. Chilling natural gas takes less energy in cool, cloudy Kitimat than in Western Australia or Texas. By some estimates, Kitimat’s climate advantage means one-third less energy is needed to get gas to -162°C on the North Coast than it would in Australia. Taken together with incremental improvements in process efficiency, LNG Canada has the foundation to achieve its goal of being the world’s least CO2intense large-scale LNG plant. Howe Sound’s Woodfibre LNG will rely on electric drive rather than burning its own gas. BC’s nearly zero-emission hydropower ensures it’ll outclass almost any LNG export plant you can name. It may not be as large as LNG Canada, but its contribution is still valuable. In the Peace River country, emissions reduction and electrification is happening in the gas fields that will supply the feed for LNG. New processing plants, where impurities are removed and heavier Continued on page 11

TOLL FREE 1-855-559-9995 PHONE 250-468-1000

EVENINGS & WEEKENDS CELL 250-951-1944

WWW.VIEQUIPMENTLTD.COM

INFO@VIEQUIPMENTLTD.COM

OFFERING QUALITY EXCAVATOR COMPONENTS FOR JOHN DEERE, HITACHI, & CAT “ALL MAJOR COMPONENTS”

WE SHIP WORLDWIDE. QUICK, RELIABLE SERVICE. CALL 1-855-559-9995

EXCAVATOR PARTS FOR JOHN DEERE/HITACHI/CAT · NEW/USED/REBUILT


September 2019

Supply Post · Our Readers Are Your Buyers

Continued from page 10

hydrocarbons are extracted from the raw gas, are choosing electric power over gas. BC‘s carbon tax has played a part in shifting the sector to electrify, as has a build-out of electrical infrastructure in the Peace. While critics have raised concerns over fugitive methane emissions, BC has responded with tighter regulations. New wells and plants will be built to tougher standards, inspected three times a year for leaks. Some producers are already going beyond the government’s goals. Shell, the lead partner in LNG Canada, estimates its methane leakage is 0.1%. Their new wells in the Groundbirch area west of Dawson Creek have replaced gas-emitting pneumatic controls with electric ones. Other players are taking similar approaches to keep that methane where it belongs: in the sales pipeline. Some of BC‘s LNG foes, notable the Canadian Centre for Policy Alternatives, have taken to portraying coal in a relatively positive light in their attempts to demonize gas. It’s a monumentally silly pose.

In their world, coal can be mined, shipped easily, with scant fugitive emissions, and little fuel needed to get the stuff from mine to power plant. Not so fast. To deliver the same energy as a ton of LNG takes 2.5 tons of Powder River Basin coal. That’s two and a half times the mass to move from the Rockies to the Coast, and then across the Pacific – no formula for saving fuel. Coal is worse than LNG in other ways. Aside from CO2, coal has far more sulphur, mercury, and particulate emissions than gas — even with smokestack scrubbers and filters. From BC‘s perspective, gas has a giant advantage. We produce it, and we benefit from royalties and income taxes from the sector. Our government can make sure our producers live up to their claims of being as clean as they say they are. None of that happens with Wyoming coal. Liquefied natural gas is no cure-all for the climate challenge humanity faces. No one part of the evolving energy mix is. Gas offers a ready substitute for coal

in regions that have few choices in keeping their grids up. If you have to burn a fossil fuel for power or heat, natural gas should be the first choice. b

Page 11

LIKE USON FACEBOOK! If you’re a fan of visit us on Facebook and give us the thumbs-up! Facebook.com/SupplyPost71

By Ian King

DISCOVER DARBY COMFORT

Industrial Seating Specialists | T: 705-560-9421 | F: 705-560-4663 | www.darbymanufacturing.com

QUALITY AFTERMARKET PARTS FOR ALL MAKES ALL MODELS

HYDRAULIC CYLINDER (STICK)

YOUR UNDERCARRIAGE EXPERTS!

HYDRAULIC CYLINDER (BOOM) BOOM

STICK

CAB

HYDRAULIC CYLINDER (BUCKET)

ENGINE (DYNOMOMETER TESTED)

MAIN CONTROL VALVE ATTACHMENTS MAIN HYDRAULIC PUMP

LINKAGE

SWING DRIVE

SWING RING TRAVEL MOTOR SPROCKET

BUCKET

FINAL DRIVE

YOUR WEAR PARTS EXPERTS!

CAB BODY FRONT TRACK IDLER SPRING

BOTTOM ROLLERS TRACK GROUPS

TORONTO 1-800-268-0679 | LONDON 1-800-959-5516| OTTAWA 1-800-463-7011| SUDBURY 1-800-334-5154 EDMONTON 1-800-319-7787| CALGARY 1-403-998-8956 | VANCOUVER 1-800-661-1157 | SPARWOOD 1-250-425-7018 QUEBEC CITY 1-888-609-5369 | MONTREAL 1-800-567-8722

www.essltd.com

SINCE 1946

CONNECT WITH US


Page 12

Supply Post · supplypost.com

Hultdins Renews Its Commitment Hultdins renews its Commitment to Product Innovation with a new Logo and Brand Presence. Since 1928, Hultdins has been developing, manufacturing, and perfecting tomorrow’s tools

and constant drive to develop and manufacture innovative products for the Forestry, Construction and other heavy equipment industries. For over 90 years in Europe and over 25 years in North America, Hultdins has been known for high quality reliable products and trusted product support. This has been Hultdins’ way of business from the beginning and will continue with a fresh new look. b

and components for Forestry and Construction machines. Legendary products used worldwide every day. The refreshed new Hultdins Logo and Brand, encompasses our renewed commitment Source: Hultdins

Quality Engineered & Manufactured Heavy Equipment Attachments

Toll Free 1-866-319-4114 | destec@telus.net | www.destec.ca

ATTACHMENTS & MORE

September 2019

Helping Farmers Grow Their Businesses The governments of Canada and Ontario are helping farmers improve their business operations so they can continue to play an important role in boosting the province’s economy and producing some of the safest, highest quality foods in the world. The governments have committed up to $10.8 million in cost-share funding to eligible farmers and agri-food businesses to complete more than 740 projects to enhance their businesses. Funded through the Canadian Agricultural Partnership (the Partnership), these initiatives support improvements in areas such as enhanced traceability systems, upgrades to animalhandling equipment and strengthened biosecurity measures. Some examples of projects supported through this programming include: • New technologies to improve the housing of farm animals;

fairs. “Investing in these projects will help our farmers succeed while boosting innovation, productivity, and competitiveness for the entire sector.” Since June 2018, both the federal and provincial governments have committed cost-share support to almost 1,900 projects through the Partnership to help eligible Ontario farmers, processors, businesses and sector organizations innovate and grow. The Partnership is a fiveyear, $3-billion commitment by Canada’s federal, provincial and territorial governments that supports Canada’s agri-food and agri-products sectors. This cost-share funding is supporting projects in the following key priority areas: Economic development in the agri-food and agriproducts sectors. Environmental stewardship to enhance water quality and soil health. Protection and assurance to reinforce the foundation for public trust in the sector through improved assurance systems in food safety and plant and animal health. b

• New products to support retaining, growing or finding new markets for farm commodities; • Improving the food safety-traceability systems on farms to meet or exceed international certification standards. “Through the Canadian Agricultural Partnership, we are supporting farmers to build an even stronger, more innovative and sustainable sector,” said Marie-Claude Bibeau, federal Minister of Agriculture and Agri-Food. “Investing in on-farm innovation and improvements helps ensure our farmers continue to meet growing consumer demands for our safe, highquality food while also increasing the sector’s capacity to compete at home and internationally.” “Our government is committed to making our agricultural and agri-food sector open for business,” said Ernie Hardeman, Ontario Minister of Agriculture, Food and Rural Af- Source: News.Ontario.ca

EARTH FIRST LOGGING

COMPLETE DISPERSAL earthfirst@telus.net

$165,000

$119,000

1999 Madill 2800 Short Wood Log Loader c/w WBM 10 sq. ft. grapple, A/C hyd.

2012 Tigercat 630D Grapple Skidder

$299,000

$15,000

2016 Link-Belt 210X2PHN Processor c/w 2015 Waratah HTH622B, comp. measuring, steel feed rolls, butt saw, top saw, A/C forestry cab, forestry pkg., high walker, 6,850hrs.

1989 Kenworth T800 w/Atlas AK4006-1, Cummins 444, Eaton Fuller 15 spd., A/R susp, 17 ft flat bed, 2 sec 19 ft. ct.r mtd. folding boom, dual ctrls, hyd outriggers.

tilt rear entry forestry cab, high walker.

c/w decking blade, A/C cab, hyd dual function grapple, 73/44. 00x32, 2 sets chains, 9,958 hrs.

1988 Trailmobile 48’ T/A Insulated Shop Van Trailer c/w Kubota 8 KW gen set, w/diesel, sliding axles, spring susp, 100 amp fuse box, shelves, lighting and heaters........................ $25,000 2013 GMC Sierra 3500 HD Crew Cab 4 x 4 Utility Truck, c/w 6.6 litre, A/T, Vmac underhood compressor, 267,337 kms ....................................................................................................$25,000 2014 GMC Sierra 3500 HD Crew Cab 4x4 pickup, 99,123 kms .....................................$26,000 2004 GMC 1500 c/w Fibermold 8 foot fiberglass MTC unit body, 241,000 kms ...............$13,000 2013 GMC Sierra 3500 Crew Cab 4x4 Flatbed Truck 149,782 kms.................................$18,500 2012 GMC Sierra 1500 Extended Cab 4x4 Pickup, 191,714 kms....................................$12,500 2015 Chevrolet Silverado 3500 Crew Cab 4x4 Pickup, 137,000 kms ...........................$22,500

Own or Rent

• Hammers • Crushers Crusher Buckets • Grapples • Compactors • Blowers & Dust Suppression

1-877-255-9293 · 604-888-9020 · www.vanedequipment.com

For more info/pictures visit: supplypost.com/dealers/earth-first-logging

Call/text Gord now for best pricing!

1-250-255-8037


September 2019

Supply Post · Our Readers Are Your Buyers

Addressing Canada’s Declining Mining Competitiveness Industry leaders propose recommendations for government action through the Canadian Minerals and Metals Plan (CMMP) at Energy and Mines Ministers’ Conference (EMMC) A national alliance of mineral exploration and mining associations are urging Mines Ministers, having convened for their 76th annual conference in Cranbrook, to take action to ensure Canada remains a globally competitive jurisdiction and can continue to attract mineral investment. A brief submitted by the Canadian Mineral Industry Federation (CMIF) proposes a series of recommendations organized under the six strategic directions identified in the Canadian Minerals and Metals Plan (CMMP) published earlier this year. The plan, developed by Natural Resources Canada with the support of most provincial and territorial governments, identifies specific areas where collaboration and action by federal, provincial and territorial governments can boost Canada’s ability to attract new mineral investment. While Canada has long benefited from a prosperous minerals and metals industry, the country is not immune to global competitive forces and cannot take the benefits and opportunities that exploration and mining presents to Canadi-

ans for granted. This year, CMIF proposes the following recommendations in support of the CMMP’s ambitious strategic directions: Economic Development, Regulatory Certainty and Investment Competitiveness Acknowledging there is fierce global competition for finite exploration and mine development investment dollars, that Canada’s economy is dependent on foreign direct investment, and that tax competitiveness and regulatory certainty are critical determinants of Canada’s investment attractiveness, it is essential that a number of critical measures be considered. These include the effective and efficient regulation of the mining industry, including sound implementation of the new Federal Impact Assessment Act, appropriate access to prospective lands, and continued and expanded investments in remote and northern infrastructure. Additionally, it is important that a strategic review of Canada’s tax regime be conducted with the aim of augmenting Canada’s investment attractiveness. Advancing the Participation of Indigenous Peoples in the Minerals Sector The Canadian mineral industry is a leader in Indigenous engagement and partnerships. Governments

can support enhanced participation of, and partnerships with, Indigenous communities in the sector through foundational social investments in areas such as health, education and housing, and by targeting funding for skills training and entrepreneurship to assist Indigenous Peoples in securing employment and business development opportunities generated by the industry. Governments should also focus on adequately discharging its duty to consult. Environment The Canadian mineral exploration and mining industry is well-positioned to play a pivotal role in the low-carbon economy as the provider of the raw materials necessary for innovation in many other sectors, including clean tech, manufacturing, transportation, high-tech, and aerospace and defence. Addressing climate change, while preventing carbon leakage, is critical to ensuring Canada’s “best-inclass” mineral industry becomes a supplier of choice to meet global demand for raw materials in the most sustainable and environmentally responsible way possible. Respecting the country’s biodiversity also continues to be a priority for the sector and ensuring appropriate approaches to conserving species at risk will play a pivotal role in Canada’s exploration and mining future. Science, Technology and Innovation Geoscience and innovation continue to be foContinued on page 14

Page 13

1-844-223-7422

FORESTRY EQUIPMENT DISPERSAL

2006 Madill 2850C short wood grapple, SN #138 3,600 hrs on complete rebuild. Work orders of $435,000.

2014 Madill 2850C Butt N Top Grapple, 4400 original hrs on machine. Very good shape. Asking $520,000.

2013 John Deere 2154D / 622B Waratah processor, 7300 hrs. In good shape serviced and ready to work. $220,000.

2013 John Deere 2154D / 622B Waratah processor with 8700 hrs, new pump and pump drive two years ago. Serviced ready to work $185,000.

2014 JD848H grapple skidder, 10,000 hrs, 77x4400x32 tires w/ chains. Eng. and trans. done at 5000 hrs, w/ good 35.5 x 32 tires & chains for same value. $185,000.

2014 Doosan DX225LC-3 Excavator, buckets, thumb, cab guard, catwalks, and only 2600 hours. $143,800.

2012 Volvo EC210LC w/ new low hr. Promac mulcher, comes w/buckets, thumb, forestry guarding new U/C, 7,200 hrs. $CALL.

John Deere 2454D Log Loader, 10,500 hrs with new engine 7,000 hrs ago, new U/C 300 hours ago. $137,000.

• SPECIALIZING IN NEW & USED UNDERCARRIAGE • PARTS • EQUIPMENT RENTALS & REPAIRS EQUIPMENT LTD. • TRACK PRESS FACILITY • IDLER REBUILDING

594 Chilcotin Road, Kamloops, BC V2H 1G5

EQUIPMENT FOR RENT OR SALE

• • • • • • •

• • • •

2018 Komatsu PC200LC-8, 3 bkts, Q/C, thumb, cabguard, catwalk, new mach. RENTED 2015 Komatsu PC170LC-10,, 3 bkts, thumb, cabguard, like new cond., 1,400 hrs. 2014 Komatsu PC290LC-10, 2 bkts, thumb, exc. cond, 4,800 hrs. 2012 Komatsu PC200LC-8, 3 bkts, thumb, cabguard, Q/C, exc. cond., 2,800 hrs. 2014 Komatsu PC88MR-8, 3 bkts, wrist-bkt., hyd. thumb, swing boom, 2,400 hrs. 2016 Hitachi ZX85 USB-5, 3 bkts, hyd. thumb, swing boom and blade, exc. cond. 2012 Komatsu D65EX-17, sigma blade, ripper & forestry guard., new U/C, plumbed for GPS, exc. cond. Dressta TD10M Crawler, 6 way, blade, cab, A/C, 850 hrs, like new cond. Dynapac CA362D, 84” smooth drum, cab, A/C, 2,500 hrs, exc. cond. 2012 Hamm 3412, 84” smoothdrum w/ shell kit, cab, A/C, exc. cond. 2010 Hamm 3307, 66” smooth drum w/shell kit, cab, A/C, exc. cond. FOR RENT

2014 Komatsu WA270-7, wheel loader, 3 yd. bkt. forks/Pipe grapple, exc. cond.

RENT NOW

2014 Doosan DX63-3 US10 Excavator with buckets & thumb, 480 hrs $59,800.

2007 Tigercat 870C, recent U/C, rotec bearing & swing box update, engine & pump. $CALL.

2007 Tigercat LX870C, new engine, recent U/C, tilt system rebuilt, pumps replaced @ 9500 hrs. 15,000 hrs. $207,200.

2006 John Deere Grapple skidder, 14,000 hours. $65,000.

2017 Komatsu PC350LC-8, 3 bkts, thumb, 1,700 hrs, new cond.

HUGE INVENTORY OF USED UNDERCARRIAGE • • • • • • • • •

Cat 330 TGA’s 28”, 2 bar pads on new rails. Cat 330 33.5” 3 bar shoes, full set, 75% remaining. Komatsu D65EX15-17 TGA’s 24” (Plus System) ZX350/PC360 New Take-off Track Groups, 32” 3 bar Deere 2154 TGA’s 28” 2 bar on new rails ZX200LC/PC200LC TGA, 28” 2 Bar on new rails ZX350, ZX450 bottom rollers. T.Cat 870 / Deere, 959 track spring assy. rebuilt. ZX200 (Rebuilt) Track Adj. Assembly.

Phone: (250) 374-5054

Email: traktech@telus.net

EVES: Regan Zurowski (250) 371-1444 • Chad Zurowski (250)371-7535

For photos and more listings visit www.traktech.ca

supplypost.com/dealers/pacific-truck-equipment


Page 14

Supply Post · supplypost.com

Continued from page 13

cal points for the mineral exploration and mining sector. The federal government should expand rigorous geological studies across Canada, particularly for mapping of

remote regions in greater detail. Innovation, in everything from autonomous vehicles to mine electrification, is increasingly important to the sector. By investing in new exploration techniques

2013 Caterpillar D5K LGP, 1,817 Hrs� $160,000

and technologies, and providing financial support to catalyze private sector innovation investments, real progress can be made in energy efficiency, environmental protection and business productivity.

2014 Caterpillar 324EL, 2,783 Hrs� $260,000

Communities Investments in human resources and skills training are essential for the sector given the mineral industry expects to hire close to 100,000 workers over the next 10 years. Increas-

2013 Caterpillar D6N LGP, 3,752 Hrs� $270,000

EXCAVATORS / DOZERS / LOADERS: 2014 Caterpillar 324EL, 2,783 Hrs ��������������������������������������������������������������������������������������������������������� $260,000 2012 Caterpillar 324EL, 3,918 Hrs ��������������������������������������������������������������������������������������������������������� $235,000 2013 Caterpillar D5K LGP, 1,817 Hrs ������������������������������������������������������������������������������������������������������ $160,000 2013 Caterpillar D6N LGP, 3,752 Hrs� ���������������������������������������������������������������������������������������������������� $270,000

TRUCKS / TRAILERS / MISC: (3) 2013-2015 Doepker Impact End Dump with Liners ���������������������������������������������������������������� $65,000-$70,000 2004 K-Line 55 Ton Lowbed Trailer �������������������������������������������������������������������������������������������������������� $55,000 2007 Peerless Jeep Trailer ��������������������������������������������������������������������������������������������������������������������� $35,000 2014 Ford F-350 XLT Super Duty, C/w 450L Fuel Tank/Toolbox Combo �������������������������������������������������������$29,900 2008 Jeep Rubicon, 73,827 km ���������������������������������������������������������������������������������������������������������������$19,500 (4) New Michelin Tires, 23�5 x R25 x HA2 �������������������������������������������������������������������������������������������� $4,500 ea� (6) New Michelin Tires, 75 x 65 x R25 XAD ������������������������������������������������������������������������������������������ $7,250 ea�

RIVER VALLEY CONTRACTORS 1-844-288-9337 | info@RiverValleyContractors.com

FIXED MOUNT MG SUPERGRIP GRAPPLES WITH XR ROTATORS BY HULTDINS For excavators from 6 to 25 tonne capacity. FOLLOW US

HULTDINS.COM

September 2019 ing collaboration between governments, industry and educational institutions to ensure new entrants to the mineral industry have the required skills is particularly important. It is also essential that governments work together to enhance support for initiatives to address barriers to diversity and inclusion in the mineral exploration and mining sector. Global Leadership Supporting the Canadian mineral industry, including the continued expansion of market access through free trade and investment agreements, is critical to its future success. Canada is a global leader in responsible business conduct, and its leading practices should be promoted by governments to advance Canada’s development goals and expand the benefits that exploration and mining activity brings to communities around the globe. The federal government should continue to work with the private sector, including Canadian exploration and mining companies operating abroad, to leverage Canadian devel-

opment activities and realize better outcomes for communities. In order to attract greater investment and enhance the competitiveness of the mineral sector, Canada’s Mines Ministers must be bold. CMIF’s proposed recommendations, aligned with the CMMP, provide needed support to Canada’s mineral industry to ensure its ongoing competitiveness. With the strong building blocks Canada already has in place, and with mineral exploration and mining playing a critical role in the low-carbon future, the need to support one of the country’s most significant sectors is more important now than ever before. Quotes: “Without the vital support of governments to achieve the recommendations by CMIF, Canada’s exploration and mining industry—once envied the world over for its mineral wealth and abundance of exploration and extraction expertise—will continue slipping from its position Continued on page 15


September 2019 Continued from page 14

of dominance. As foreign competition soars, we are left chasing countries that once viewed us as the global benchmark. The recommendations, in partnership with the CMMP, will ensure Canada’s continued success as a leader in exploration and development, providing major social and economic benefits for generations to come,” says PDAC President Felix Lee. “We are encouraged by the commitments in the new Canadian Minerals

Supply Post · Our Readers Are Your Buyers and Metals Plan (CMMP). Our recommendations, through CMIF, seek to harness the momentum of the CMMP to address Canada’s declining mining competitiveness and restore Canada’s position as the dominant mining nation. The time has come for bold action and we call on federal, provincial and territorial leaders to act on these recommendations,” said Ben Chalmers, Senior Vice President of The Mining Association of Canada. b Source: Mining.ca

5425 Production Blvd., Surrey, BC, V3S 8P6

Phone 604.530.5758 Fax 604.530.3554

Toll Free 1.888.530.5444 Focused on Parts for John Deere & Hitachi Late Model Excavators

DuPont Partners With Habitat For Humanity International DuPont, a global science and innovation leader, announced a new corporate partnership with Habitat for Humanity International. The partnership enables DuPont to support Habitat for Humanity projects with donations of energyefficient building products while also providing employees with meaningful volunteer opportunities.

Continuing a legacy of impact started by our Performance Building Solutions business many years ago, donated products such as Styrofoam Brand insulation, DuPont Weathermate Homewrap and Great Stuff Insulating Foam Sealant have become worksite staples at Habitat builds across North America. These products provide

Page 15 increased thermal, air and moisture protection, which lowers energy bills and creates more comfortable and safer living conditions for people around the world. “Providing safe, affordable shelter is critical to many communities across the globe and we are proud to collaborate with Habitat for Humanity International to help them build efficient, sustainable homes,” said Patrick McCrummen, DuPont’s Global Community Impact Leader. The company also actively supports major

Habitat programs like the Jimmy & Rosalynn Carter Work Project and the annual Home Builders Blitz. “By partnering with DuPont, Habitat can better address the worldwide need for decent, affordable homes,” said Julie Davis, vice president for corporate and cause marketing. “Our goal is to provide peace of mind for homeowners through better, more efficient designs, and partnerships like this one help us accomplish that.” b Source: DuPont

TOUGH SEASON AHEAD? WE WOULDN’T HAVE IT ANY OTHER WAY. Exceptional comfort and an easy to maintain Kubota Tier IV Diesel engine combine for an impressive piece of equipment in Kubota’s SSV Series. New side lights expand the operator’s visibility on the job site, and the roll up door and wide operator area make for a more alert and productive work environment during those long all-day jobs. But best of all, our SSV Series are easy to maintain, so you can focus on your job site, not on your equipment.

NOW WRECKING: ZX470LC-5

NOW WRECKING: JD 350G LC

Components · Cylinders · Cabs · Engines Undercarriage · Booms · Sticks · Linkage www.langleyexcavator.com parts@langleyexcavator.com

kubota.ca |


Page 16

Supply Post ¡ supplypost.com

September 2019

brandtused.ca What are you looking for? Searching for used equipment just got a whole lot easier with advanced searches, currency conversion and monthly payment calculations. And every machine is backed by Brandt – the best-trained and committed after sales support team in the business.

brandtused.ca | 1-888-2-BRANDT


September 2019

Supply Post · Our Readers Are Your Buyers

2015 JOHN DEERE 310SL Unit #: 0U280976 Hours: 919 Location: TERRACE, BC

$108,000

2008 BOBCAT T190

Unit #: 0U621086 Hours: 3061 Location: VERNON, BC

$20,000

2018 JOHN DEERE 35G Unit #: 0U280902 Hours: 765 Location: SURREY, BC

$55,000

2014 JOHN DEERE 300DII Unit #: 0U658509 Hours: 3640 Location: KAMLOOPS, BC

$335,000

2011 JOHN DEERE 870G Unit #: 0U660124 Hours: 5393 Location: SASKATOON, SK

$165,000

2016 JOHN DEERE 17G Unit #: 0U226001 Hours: 1980 Location: SURREY, BC

$25,900

2015 JOHN DEERE 2454LL Unit #: 0U240267 Hours: 6787 Location: FORT ST JOHN, BC

$289,000

2000 CASE 621C

Unit #: RM123166 Hours: 8532 Location: REGINA, SK

$45,000

FLEXIBLE OPTIONS FINANCING CUSTOMIZED, FIND OUT MORE 1-855-711-4545

2015 JOHN DEERE 744K Unit #: RE668602 Hours: 8172 Location: EDMONTON, AB

$195,000

2011 JOHN DEERE 332D Unit #: 0U205779 Hours: 3799 Location: EDMONTON, AB

$30,900

2000 HITACHI 200LC

Unit #: 0U300223 Hours: 14588 Location: EDMONTON, AB

$45,500

2009 DITCH WITCH JT1220 Unit #: 0U000296 Hours: 2774 Location: MILTON, ON

$59,000

Page 17

2008 JOHN DEERE 350D Unit #: 1U806489 Hours: 8770 Location: REGINA, SK

$75,000

2016 JOHN DEERE 948L Unit #: 0U675366 Hours: 4300 Location: KAMLOOPS, BC

$269,900

2014 JOHN DEERE 332D

Unit #: 0U262193 Hours: 3375 Location: GRANDE PRAIRIE, AB

$32,500

2004 KOMATSU D85EX Unit #: 0U010076 Hours: 12871 Location: EDMONTON, AB

$95,000


Page 18

Supply Post · supplypost.com

30418 Simpson Road, Abbotsford, BC

(604) 203-6000

james@interquiprentals.com

RENTAL EQUIPMENT

2015 Wacker Neuson 3001 Site Dumper c/w swivel skip. 3,000 kg payload, 25km/hr. (SALE OR RENTAL)

2016 Takeuchi TB260 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

September 2019

Ministers Agree To Work Together To Promote Canadian Forestry

their next meeting. • Ministers discussed softwood lumber, reaffirming the importance of a coordinated approach to support and defend Canada’s forest sector. • Innovation across the forest sector remains at the core of Council discussions. “Canada is among the best in the world in how carefully and responsibly we manage our forests. Despite this Canadian advantage, Canada tends to be a soft tar-

world leader in sustainWaskesiu Lake, SK At able forest management the close of the 2019 anand environmental stewnual meeting of the Caardship. nadian Council of Forest Ministers (CCFM) in • To advance a whole-ofgovernment approach Northern Saskatchewan, to wildland fire manageForest Products Associament. tion of Canada (FPAC) • To implement the Counannounced its support cil’s Forest Bioeconomy for the Ministers’ comFramework for Canada, mitment to work together with a report expected at to promote Canadian forContinued on page 20 estry and forest products to the country and the world. FPAC President and CEO Derek Nighbor, who joined the CCFM delegation this week in Waskesiu Lake, Saskatchewan said MACHINERY SALES & RENTALS • KELOWNA, B.C. he was pleased with the PHONE: 250-769-5454 • FAX: 250-769-5005 discussions and outcomes continentalequipment.ca from this week’s meetings. “This was definitely one of the best meetings of forestry ministers from  Filters  Cutting Edges  Bucket Teeth across Canada that I have  Equipment Attachments attended in recent years,”  OTR Loader & Rock Truck Tires Nighbor said. “There was a real focus on the big picture. How can we better use forest management to fight climate change? How can we more actively manage our forests in and around communities to keep people safe from wildfires? How can wood fibre-based products address our single use plastics challenge? These are 2006 HITACHI ZX350LC-3 EXCAVATOR FOR SALE EROPS C/W HYD. THUMB, BUSH GUARDING, 8,200 HRS, DIG BUCKET. the things we need our governments focused on USED EQUIPMENT & MACHINERY if we’re going to help our 2008 Cat 980H, 14,000 hrs, recent trans., new L4 tires, on-board scale, environment and support rent or rental purchase available ........................................... $154,500 much-needed jobs in for2005 Cat D6R XL Series II, p.a.t. dozer, EROPS w/air, MS ripper, estry communities,” Nighguarding ............................................................................ $159,900 bor added. 2006 Daewoo D500 Wheel Loader, 9,600 Hrs, exc. tires, work ready Specifically, Canada’s .......................................................................................... $99,000 forestry ministers agreed on a few key initiatives: 2012 Deere 225DLC, c/w 5,200 hrs, pro link hyd. thumb, Q/C, dig bkt ......................................................................................... $130,000 • To further collaborate to promote the environ2005 Hitachi ZX330LC, c/w thumb, Q/C, 2 bkts, new final, 10,000 hrs, mental reputation of the exc. U/C, catwalks, FOPS, new final drive ............................... $109,900 forest sector and further 2005 Hitachi ZX330LC, c/w 11,000 hrs, q/c, hyd thumb, dig bkt ..$89,900 position Canada as a

IN STOCK:

2016 Komatsu PC138US c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2014 Hyundai R210LC-9 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

2012 Komatsu PC210-8 c/w hyd pin grabber Q/C & 2 buckets (SALE OR RENTAL)

Wacker Neuson DW60 Site Dumper, AWD Front or swivel tip, 6,000kg payload. Optional cab.(SALE OR RENTAL)

New Holland D85WT Dozer c/w ripper and 6 way blade (FOR RENTAL ONLY)

JCB 3TS-8T Teleskid c/w bucket & forks (FOR RENTAL ONLY)

MORE INVENTORY ARRIVING SOON. • Site Dumpers • Skid Steers • Much more!

Check out our website for all of our available rentals

Call for availability 604-203-6000

interquiprentals.com

$79,900

2007 ZX135US, c/w 3200 hrs, hyd q/c, bkade 54î c/u bkt w/boe, hyd thumb, a/c, dig bkt .............................................................. $107,750

Browse Thousands of Equipment & Truck Listings at .com

2007 Volvo 360BLC, c/w 8,400 hrs, Q/C, thumb, 2 bkts, catwalks & FOPS..................................................................................$89,900 2002 Cat 980G Loader, new 29.5R25 tires, GP bucket w/BOE .... $109,900 Loader Tires 17.5 x 25 - 29.5 x 25 ...................................................POR

RENTALS 2012 Deere 225DLC ...............................................................FOR RENT 2013 Hitachi ZX135USBL-3 ...................................................RENT ONLY (2) 2006 Volvo A30D Trucks ..................................................FOR RENT Terex J1170 Jaw Crusher .......................................................FOR RENT 2018 ZX50U-5 ......................................................................FOR RENT 2018 ZX35U-5 .....................................................................FOR RENT ALL EQUIPMENT FOR SALE IS AVAILABLE FOR RENT LOTS OF ATTACHMENTS…CALL FOR SELECTION

Call us at: 1-800-663-5454


September 2019

Supply Post · Our Readers Are Your Buyers

Page 19

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

SERVICE TRUCKS IN STOCK! Acela Monterra 6x6 with Brutus 15’ 10” service body, Miller 325 welder, Vanair Powerflex AH, and Cobra 11000.3 crane (Unit 3473).

RAM 5500 crew cab 4x4 with 11’6” Brutus oilfield deck and Fassi F85B.0.24 folding crane. (Unit 3643).

Brutus tandem axle aluminum lube trailer with diesel heater, shore power, workbench, filter bin, filter storage, grease keg, and tanks for waste oil, waste antifreeze, antifreeze, six oil products (Unit 3669).

Peterbilt 348 6 x 4 with 21’ Brutus lubrication body with greaser, waste oil, waste antifreeze, antifreeze, 5 oil products, diesel fuel, VMAC Predatair60 compressor, and Espar diesel heater system (Unit 2127).

www.brutusbodies.com


Page 20

Supply Post · supplypost.com

Continued from page 18

get for global activists who spread misinformation in an effort to shut down forestry operations,” Nighbor said. “At the backdrop of me-

dia reports this week of a possible global recession looming, I was very pleased to see Ministers prepared to stand up for the values of Canadian forestry and the men

and women who rely on our sector to pay the rent or mortgage and provide for their families,” Nighbor added. b

Volvo Construction Equipment And SDLG Take Next Step In China

Source: FPAC

Volvo Construction Equipment (Volvo CE) and SDLG will further extend its cooperation to accelerate the profitable growth journey. As of December 2020, all excavators from 15 tons made for the Chinese market will be consolidated into one product line based on the latest Volvo technology and Volvo branded. Volvo CE and SDLG are currently manufacturing and selling their own separate excavator product lines in China. In order to further accelerate growth in conjunction with the upcoming China IV emission standards, all excavators from 15 tons for the Chinese market will be consolidated into one product line by December 2020. The products will be based on the latest Volvo technology and branded Volvo. Since Volvo CE acquired 70% of SDLG in 2007, net sales have grown from approximately SEK 3 billion to SEK 17 billion with good profitability. SDLG has a strong market position in

800.333.0650

hrparts.com Now Available ... Expanded New Parts for Excavators, Bulldozers, Wheel Loaders, and Articulated Trucks

Final Drives

Swing Drives

Hydraulic Pumps & Motors

Track Spring Assemblies

Gear Valves and Pumps

Slewing Rings

Hydraulic Cylinders

Differential Assemblies

Engines

Case • Caterpillar • Dresser • Hitachi • Hyundai • John Deere • Kawasaki Kobelco • Komatsu • Link-Belt • Volvo BUFFALO, NY

ATLANTA, GA

September 2019

LOS ANGELES, CA

Call our knowledgeable Parts Specialists today at 800.333.0650

cooperation in 2007. With sales of both brands growing and our cooperation getting ever closer over the years, this is a natural next step for us.” b

wheel loaders and has successfully entered the excava- Source: Volvo CE tor market with technological support from Volvo CE. “Bringing our larger excavator businesses in China Heyyy! together will maximize our ability to serve customers in The next China,” comments Melker Ad Deadline is Jernberg, President of Volvo Construction Equipment. Sept. 20th “SDLG has been a great 5:00 pm success since we began our

Coil and Leaf Springs Since 1906 MECHANICAL COIL SPRINGS Compression, Extension and Torsion LEAF SPRINGS Pickup Trucks, Highway Trucks & Trailers Off Highway Truck Springs U-Bolts, Suspension Parts, Air-Bags 800-661-4205 | Sales@Dendoff.com www.Dendoff.com | Surrey, BC

Unreserved public equipment auctions

57 0+

16 0+

2014 & 2011 Caterpillar 160M VHP Plus Grande Prairie

2010 Caterpillar 345DL | Montreal

Large Assortment of Wheel Loaders Grande Prairie

79 0+

13 5+

20 +

IM PA CT CR US HE RS

MFL RCI 100-130 Impact Crusher | Edmonton

2016 Caterpillar 980M | Truro HY DR AU LIC EX CA VA TO RS

AR TIC UL ATE DD UM PT RU CK S

2014 Caterpillar D6N LGP | Edmonton

WH EE LL OA DE RS

MO TO RG RA DE RS

CR AW LE RT RA CT OR S

37 0+

Equipment financing by equipment experts.

1 of 2 – Volvo A25D 6x6 | Montreal

Caterpillar 330DL | Truro

54,980+ items in 85+ auctions including Edmonton, AB Montreal, QC Truro, NS Grande Prairie, AB

Sep 10–12 Sep 17–18 Sep 20 Sep 24–25

Auction Company License #303043, Auction Company License #309645, MV Dealer #10539.

Toronto, ON Saskatoon, SK Chilliwack, BC Regina, SK

Oct 1–2 Oct 9–10 Oct 16–17 Oct 18

Bid in person or online

▸ No minimum bids or reserves ▸ Test and inspect on-site ▸ Open to the public ▸ Free registration

Financing & leasing

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

See complete listings at rbauction.com


September 2019

Supply Post · Our Readers Are Your Buyers

$100M Federal Infrastructure Funding For Vancouver On July 23, 2019, the port authority received over $100 million from the federal government’s National Trade Corridors Fund to support infrastructure projects that will facilitate goods movement to and from the Port of Vancouver. “As a Canada Port Authority, our job is to make 592 Lilac Cres., Campbell River, BC V9W 7G6

sure the port is ready to handle Canada’s growth in trade, but we are also undertaking a number of projects beyond the port to improve the flow of goods and seek to alleviate the impacts of growing trade on local communities,” said Robin Silvester, president and chief executive officer at the Vancouver Fra-

SARATOGA

VENTURES LTD. WE SPECIALIZE IN USED PARTS & ATTACHMENTS FOR THE LOGGING INDUSTRY!

EQUIPMENT FOR SALE: • Manley Dozer Boat, Detroit 471 engine, new twin disc 509-1 gear, new hydraulic steering, hull and pod are in excellent shape ...........................................................SOLD. • 1994 Komatsu PC300HD-5 Excavator, Machine has 28” Triple bar pads and a 42” Bucket ...............................SOLD. • 1988 Madill 075 Super Snorkel mounted on a 085 tracked carrier ...................................................................$80,000. • 1980 15ft Westcoast Winder. with a Detroit 471 engine and a Hydro-drive . Both the drive and the engine were replaced in 2017………………………………… .... …..$39,500. • 1991 Madill 123 Grapple Yarder. This machine was Re-manufactured at T-Mar Industries in 2014, It was re-powered w/a 12.7L Detroit Series 60 and Allison transmission, New rotek, new cab and control system, Winch re-bearing and all gears inspected, Pumps and travel motors done, The machine has been out working for the past two years and has 2,860 hours on it since it came out of T-Mar .............................................$850,000. • Madill 009 Tower w/ Cat 3406 engine. Machine is on a tracked carrier and will come with lines, blocks and rigging. ........................................................................$34,000. DISMANTLING FOR PARTS:

• Pacific P16 Log Truck and Trailer • Excavator Bkts • Madill Parts: 009, 044, 075 (Rubber & Trk) • Clark Axle Components & Parts: BD 71,000 & 91,000 • Komatsu PC400-5

TOLL FREE 1-888-668-1611 Phone: 250-286-3211 • Fax: 250-286-3284

svl@saratogaventures.com | www.saratogaventures.com

ser Port Authority. “With this federal funding, we are able to take on five new projects that will enable us to continue this critical work.” The five funded projects include three infrastructure projects in Richmond and Surrey to reduce interactions between the community and road and rail activities by building overpasses and making other improvements in operations. Additional funding will support two studies that will look at how to move goods more efficiently throughout the Lower Mainland. “We are pleased to have continued recognition from Minister Garneau and the federal government of the important role this region plays in the country’s economy,” continued Silvester. “We also want to thank the many stakeholders with whom we have collaborated to bring these projects to this stage, and whose efforts are ensuring a strong economy for our local community and for Canada. They include our local members of Parliament, the provincial government, municipalities, Indigenous groups, and industry partners.” The funded projects were identified in the Greater Vancouver Gateway 2030 Strategy, a strategic plan developed by the Gateway Transportation Collaboration Forum. The forum is an ongoing collaborative effort to ensure the Greater Vancouver gateway is ready to manage growing trade, and its membership includes Transport Canada, the B.C. Ministry of TransportaContinued on page 22

Browse Thousands of Equipment & Truck Listings at .com

Page 21


Page 22

Supply Post · supplypost.com

FIRE SEASON IS COMING!

CALL FOR YOUR STAND-BY WATER TANK NOW!!

250-698-7451 · fax 250-698-7421

Continued from page 21

tion and Infrastructure, the Vancouver Fraser Port Authority, TransLink and the Greater Vancouver Gateway Council. In 2018, the Vancouver Fraser Port Authority re-

September 2019

ceived more than $200 million through the National Trade Corridors Fund for projects with similar objectives to those announced. More information: Gateway Transportation Collaboration Forum

Transportation 2030 Transport Canada National Trade Corridors Fund July 22, 2019: Government of Canada invests in transportation infrastructure at the Port of Van-

couver to move goods to market June 22, 2018: Vancouver to benefit from more than $200 million in federal funding for key goodsmovement infrastructure projects Continued on page 24

Current stock for wheel loaders Parts available for all Deere models & generations!

STAND-BY WATER TANK For remote access fire suppression, will not crush from grapple pressure

Refurbished:

Used:

Aftermarket:

Axles, park brake assemblies, control valves, & more...

Rims, sheet metal, loader booms, & more...

Steps, cab glass, mirrors, & more...

CALL

Manufactured and Sold by:

SHILOH ENTERPRISES LTD. GEORGE: 250-698-7451

FORESTECH EQUIPMENT 4335 BARGE TERMINAL RD. CAMPBELL RIVER, BC

$249,500

$449,500

2002 Madill 3800C c/w: WBM grapple, heel rack, LL front, west coast elevated rear entry cab on riser, Series 60 engine, forestry guarding package, high walker undercarriage with 28” double bar pads.

1988 Madill 122 Swing Yarder c/w: Grapple, lines, 57’ boom w/ fairlead, split cab, 8V92 eng., Wheeler air system update, two guy lines, mounted on Madill 087 hydraulic drive carrier w/ 32” TBP. Work orders, good operating condition.

PROCESSORS

FELLER BUNCHERS

2006 Caterpillar 330C FMHW Processor c/w: 2004 Waratah HTH624 Super processing head, log loader front, west coast elevated rear entry cab, forestry guarding pkg w/ aux. fuel, tank, high walker U/C w/ 30” DBP. Recent head R/B, ready to work! .................................................$224,500.

2005 Valmet 475EXL, c/w: Quadco OFH22B 22” felling head, 360 degree wrist, ROPS cab, Cummins eng., fire suppression, Pro Heat, self levelling undercarriage w/ 28” SBP. 10,645 hours. Recent new pumps, work orders. .........$124,500.

2003 Caterpillar 330C FMHW Processor c/w: 2004 Waratah HTH626 processing head, log loader front, west coast elevated rear entry cab, forestry guarding pkg w/ aux. fuel, tank, high walker U/C w/ 28” DBP. Works orders, ready to work! .....................................................$174,500. 1996 Link-Belt 4300Q c/w: 2000 Waratah HTH624 processing head, log loader front, elevated rear entry cab, forestry guarding pkg w/ aux. fuel tank, highwalker undercarriage w/ 28” DBP. Good op. condition!........................$64,500.

1-877-685-4886

E-mail: usedparts@brandt.ca Inventory: brandt.ca/ValueParts

Burns Lake, BC.

LOG LOADERS 2014 Kobelco SK350MkIVLL, c/w: T-Mar grapple, heel rack, LL front, west coast elevated rear entry cab on 72” riser, Cummins eng., forestry guarding pkg w/ aux. fuel tank, high walker undercarriage w/ 30” double bar pads. 3,180 hours on rebuild by T-Mar Ind. in 2014. .....................................................................P.O.R. 2008 John Deere 3554LL, c/w: T-Mar grapple, heel rack, LL front, west coast elevated rear entry cab on 72” riser, forestry guarding package w/ aux. fuel tank, high walker undercarriage w/ 28” DBP........................................................$174,500.

WHEEL LOADER

FORESTRY EXCAVATORS

2007 John Deere 844J Wheel Loader c/w: WBM M33 log grapple, third valve, ROPS cab, ride control, 29.5 X 25 tires, forestry guarding package. 15,145 hrs. Work orders, good rubber! ...............................................................$224,500.

2011 John Deere 3754D “Road Builder”, c/w: Dig bkt, Q/C, hyd. thumb, hoe front, forestry cab on 8” riser, forestry guarding package w/ aux. fuel tank, high walker undercarriage w/ 28” DBP. Recent engine O/H, ready to work! .......$164,500.

VISIT OUR WEBSITE FOR OUR FULL INVENTORY:

WWW.FORESTECH.CA Contact Tim Lloyd : 250-703-3551

$299,500 2011 Caterpillar 568 “Road Builder” c/w: Dig bkt, clean up bkt, hyd. Q/C, hyd. thumb, aux. hyd., hoe front, forestry cab on 18” riser, forestry guarding pkg, high walker U/C w/ 28” DBP. 10,225 hrs. Recent U/C rebuild w/ very low hours.

OFF HWY TRUCKS & LOWBED TRAILERS Pacific P-16 T/A Conventional Truck & Knight 100 Ton T/A Lowbed Trailer, c/w: 12V71N, Allison 5960 trans., spring susp., Clark BD91 axles, 14:00X25 tires, 13’ bunk on turntable, log bunk hitch, 21’3” L X 14’ W wood lined deck, KB axles, 14:00X25 tires, manual beaver tails, push block. ....................................................$104,500. Kenworth 849 T/A Truck & King TD100RG T/A Lowbed Trailer, c/w: Cummins NTC 400 eng., 13 X 4 trans, spring susp., Clark BD90 axles, 14:00X25 tires, 11’W X 20”L wood lined deck, Timken axles, 14:00X25 tires. ................$49,500.

OFF HIGHWAY LOG TRUCKS Hayes HD Conventional T/A Log Truck & Trailer c/w: Cummins 400, 5X4 trans., spring susp., 4640 rears, Bud wheels, 12:00R24 tires, T/A pole trailer. .....................................................$37,500.

$154,500 1995 Caterpillar 315L Hyd. Excavator Drill, c/w: John Henry Model 14 hyd. rock drill pkg (c/w: John Henry hammer, 20’ steel slide, hyd. centralizer, compressor powered by c/weight mtd. Cat 4 cylinder eng.) hoe front, alum. powder mag., cab, standard undercarriage with 26” TBP. Inventory of 2 Kenworth 849 & 850 Pre Load T/A Log Trucks & Trailers c/w: Cat or Cummins K Model eng., Allison trans., spring susp., Clark BD91 rear axles, 14:00X25 tires, T/A pre load trailer. ....................................... From $84,500/ea.

$59,500 Finning / Morgan Power Apparatus M-32F Tank Drill, c/w: PR66 hammer, 22’ steel slide, 3800 square boom, ROPS cab, 800 CFM comp., Cat 3306DI eng., aluminum mag., mounted on M-32 crawler carrier.

$44,500

Pacific P-16 Pre Load T/A Log Truck c/w: 12V71TT, Allison 6061 electric, Spring susp., Clark BD91 rear axles, 14:00X25 tires, Columbia Pre Load T/A trailer..................................$59,500.

MISCELLANEOUS Morgan Power Apparatus M-4P Rock Drill c/w: PR-123 hammer, 17’ steel slide, ROPS cab, GD 600 CFM comp., GM 6V92 engine, on M-4 crawler carrier ...........................................$9,950. 2007 Ford F-350XLT Crew Cab 4X4 Powder Truck, c/w: Diesel, auto, long box, tidy tank w/ pump, hose & nozzle, CRMF aluminum powder magazine .................................................$18,500. 2004 Tigercat 630C Grapple Skidder, c/w: Decking blade w/ extensions, sweeps, ROPS cab, 35.5X32 tires w/chains, dual function arch w/ bunching grapple.....................................$54,500.

1992 Caterpillar FB300B “Backspar”, c/w: Dig bkt, Q/C, hyd. thumb, hoe front, single shive backspar attachment, forestry cab, forestry guarding package, highwalker undercarriage with 24” SBP. Work orders.


September 2019

Supply Post · Our Readers Are Your Buyers

Page 23

INLAND EQUIPMENT SALES www.inlandequipment.com | sales@inlandequipment.com | 150 Industrial Place, Penticton, B.C. Call Vic Kampe For Details | Ph: (250) 493-6791 | Fax: (250) 492-2762

FEATURED UNITS FOR SALE, RENT or RENT TO OWN FOR RENT

2013 John Deere 770G Motor Grader, 4,000 Hrs, Push Block, Snow Wing, LoPro Cab ...........$157,000.

2014 Cat 660S Watertruck, 21,600 Miles, Front, Rear and Side Spray, Hose Reel .........................$149,000.

40 NEW EXCAVATORS TO CHOOSE FROM

BACKHOE/LOADERS/ EXCAVATORS/FORKLIFTS 2013 John Deere 130G, 2 Buckets, 5985 hrs ..............................................................$100,000. 2014 Bobcat E85M Excavator, Thumb, A/C, Dozer, 1,319 Hrs ........................................................Call. 2012 Bobcat E80 Excavator, Thumb, A/C, 1,377 Hrs. ................................................................Call. 2015 Bobcat E63 Excavator, Thumb, A/C Dozer, 972 Hours ..............................................................Call. 2014 Bobcat E55 Excavator, Thumb, A/C, Dozer, 1,363 Hours ....................................................Call. (2) 2015 Bobcat E35 Excavators, Thumb, A/C, Dozer, 545-295 Hours ....................................Call. (2) 2015 Bobcat E26 Excavators, Thumb, A/C, Dozer, 295-427 Hours ....................................Call. 1981 Cat 966D Bucket Machine, 40% Tires ......Call. 1985 Cat 966D Bucket or Grapple .....................Call. 1988 Cat 966E Bucket Machine, 3rd Valve ........Call. 1978 Cat 966C, Forklift sideshift, fork adjust ....Call. 2014 Cat 950K Loader ......................................Call. 2010 Bobcat E32M Excavator, 2,600 hrs, 7000 lb ................................................................$36,000. (2) Takeuchi TB16 Excavators ..........................Call. 2013 Terex TC16 Excavator, 3,800 lbs, cab, 670 hrs .......................................................................Call.

CRAWLERS/WHEEL LOADERS/SKID STEERS 2015 Bobcat S630, 2sp, Hyd Q/C, A/C. 2112 hrs. ................................................................$38,500. 2012 Bobcat T750, Cab, 2,000 Hrs ............$46,000. (2) 2005 Cat 246B Skid Steer, closed cab ...... Call. 2004 Cat 287 Skid Steer, rubber tracks, 1,300 hrs ...Call.

2011 Rolls-Royce Ghost, Immaculate, One Owner, 5,500 kms ........................................................ P.O.R.

FOR RENT OR SALE Sizes Available: ZX245, ZX345, ZX135, ZX300, ZX35, ZX50, ZX60 & ZX210 GRADERS & DOZERS 2013 John Deere 770G, c/w snow wing, 14’ MB, A/C, push block, 4,000 hrs ....................$157,000. 2004 Cat 140H 17.5x5 Tires New, 7,800 hrs ..............................................................$110,000. 2007 Cat 160H Ripper, snow wing, 8,900 hrs ..............................................................$119,900. 2008 Caterpillar 14M Motor Grader, 9,705 Hrs, 20.5 x 25 Tires @ 80%, 16’ MoBoard, Accumulators, A/C, Dual Joystick, Ripper, MODA Levelling System, Circle Clutch ............................................... $199,000. 2007 John Deere 872D, AWD, 7,147 Hrs, tires 4 @ 100%, 2 @ 80%............................................ Call. 2004 John Deere 772CH, Ser. II, AWD, ripper .Call. 2008 John Deere 872D, AWD, 14' MB, A/C, ripper .......................................................................Call. 2007 Cat 14H VHP, ripper, push block, 20.5 x 25 tires @ 60% (wing available) ........................ Call.

BELLY DUMPS, LOW BEDS & TILT TRAILERS 2004 Falcon 20 Ton Equip Trailer, Beaver Tail and Ramps .....................................................$14,900. 2007 Trailmax 10 Ton Tilt Trailer, Power Pack Tilt ................................................................$12,900. 1990 Peerless 50 Ton Tridem D/D Lowbed, 6'6" Neck Ext. 10 x 21 Deck, Beaver Tails, Detach .......... $44,900. 2017 Trailmax 27 Ton tilt trailer, new.............. Call.

ROLLERS/PACKERS/CRUSHING & PAVING (2) 2007 IR SD45D-TF, 54", w/shell kits ....$62,000. 2007 Powerscreen 1800 Warrior, 2,587 hrs .$165,000. 2007 Fintec 542, 5'x12' 2 deck screener ...$165,000. 2013 Dynapac CA2500D, 640 Hrs .............$85,000.

FEATURED RENTAL UNITS

TRUCKS 2013 International 4300 Water Truck A/T, New Tank, Front, Rear, Side Spray ..................$71,000. 2013 IHC 4400 S/A Water Truck, New tank, Front, Rear, Side Spray ......................................$71,000. 2012 IHC 4300 S/A Water Truck, New Tank, Front, Rear, Side Spray ......................................$69,000. 2009 IHC 4300 S/A Water Truck, A/T, New Tank, Front, Rear Side Spray.............................$69,000. 1984 P+H Omega 20 Ton Crane, 62’ Boom, 20.5x25 Tires.........................................................$24,900. 1984 AM General 6x6 4000 gal Heated Tank Off Hwy truck, Low Miles ..............................$25,000. 2014 Volvo Tri-Axle 4800 Gal Water Truck, low miles, 435 HP, 2 available ..............................Call. 2015 Western Star 4000 Gal Potable Water Truck, 500 HP, 18 Sp, 36,000 Km .............................Call. 2011 Ford F750 S/A Dump Truck, 200 HP, 6 Sp, 10’ Box .................................................................Call. 2006 Ford F350 4x4 Ambulance, 141K mi ....$19,900. 1980 Grove RT740 40 Ton Crane, 4 section boom, 32’ jib, 4x4x4 ...........................................$39,000. 2014 Cat 660S Water Truck, 21,600 Miles, A/T, 20,000 F, 46,000 R ................................$149,000. (2) 2014-13 Volvo A40G & F Rock Trucks, Tailgates 5,000 to 6,900 Hrs..........................................Call. 2004 Ford F750, 2,000 Gallon Water Truck, Front & Rear Spray, Hose Reel............................................... $47,500. 2005 Ford F750 Water Truck, 2,000 Gal., Front Rear Spray, Hyd. Brakes, 28,400 miles.................... $49,000. 2002 Kenworth T300 S/A Water Truck, auto..$57,000.

RENT TO OWN

★ NEW

NEW

Hitachi ZX245LCs

2014 Cat 950K Wheel Loader, 1,150 hours, air brakes, ride control, rear view camera ........$265,000.

2006 Volvo EX290B, 4,830 hrs, ROPS, autolube, 2 buckets .........................................................$85,000.

Articulated Rock Trucks

Hitachi ZX210LCs

RENTALS AVAILABLE New Hitachi ZX300LC · New Hitachi ZX135LCs · New ZX60, ZX50, ZX35 and ZX26 ·Volvo and Cat Rock Trucks · 2014 Cat 950K Wheel Loader

CALL FOR OTHER ADDITIONAL RENTAL UNITS


Page 24

Supply Post · supplypost.com

Continued from page 22

June 22, 2018: The Government of Canada invests in road and rail infrastructure for the Port of Vancouver and Canadian National May 17, 2018: The

September 2019

Project (study only); and Government of Canada of Canada’s National Trade • Burrard Inlet Road and Rail Improvements Proj• Kingsway and Westinvests in transportation Corridors Fund: Rail Improvement Project. wood Grade Separations infrastructure for the Port • Mountain Highway Unect, including the South Burnaby Rail Corridor Project (study only). b of Vancouver in British derpass Project, includShore Access Project, Improvements Columbia ing the Dominion Street now underway; and • Pitt River Overpass and Current projects funded realignment, now under- • Pitt Meadows Road and Colony Farm Overpass Source: Port Authority through the Government way;

Service Centres: Langley, • Chilliwack • Parksville

www.rollinsmachinery.com E-mail: jeff@rollinsmachinery.ca

Phone: 604-533-0048

DEMOS AVAILABLE NOW

Other products available contact us today! Johnston Sweepers are available in: • Regenerative Air • Mechanical • Vacuum

Service Centres:

Langley • Chilliwack • Chemainus

1-800-665-9060

Canada’s New Preservation Facility Project Begins Library and Archives Canada began construction on its new 12,900-square metre preservation facility in Gatineau. The addition of this new building, which will be linked to the existing state-of-the-art Preservation Centre, will allow LAC to consolidate an ever-growing collection and guarantee the long-term preservation of analogue textual holdings and audiovisual materials, which require very special preservation conditions. The facility also will be the first net-zero carbon centre dedicated to archival preservation in the Americas when it goes into operation by summer 2022. At the ground-breaking ceremony on August 12, 2019, Dr. Guy Berthiaume, Librarian and Archivist of

21,240 cubic metres, or the equivalent of about 8.5 Olympic-sized swimming pools, of collection storage capacity and will also be one of the world’s largest facilities equipped with an automated storage and retrieval system for archival collections. b

Canada, called it a great day for the continued preservation of Canada’s cherished and invaluable documentary heritage. The centre will provide Source: Canada.ca

PICK 1 OF 3 LIMITED-TIME OFFERS ON BOBCAT COMPACT EQUIPMENT.

Save big when you purchase, lease, or finance your new machine.

Authorized Bobcat Dealer

Abbotsford | Kamloops | Nanaimo | Victoria www.WESTERRAEQUIPMENT.com 1.888.713.GRIT

“attachment specialists”

780-962-8586 ATTACHMENTS BLADES angle, straight, & U for all sizes RIPPERS single or multishank for all sizes WINCHES rebuilt, complete for all sizes

EMAIL: CRAWLERSALES@TELUS.NET FAX: 780-962-9465 Edmonton, AB

PARTS NEW, USED & REBUILT PARTS & COMPONENTS

KOMATSU 100 units dismantled CATERPILLAR 15 units dismantled CARCO - PACCAR 75 winches dismantled ALLIED - HYSTER 75 winches dismantled


September 2019

Supply Post · Our Readers Are Your Buyers

30-Stories Up: What It’s Like To Be A Tower Crane Operator While attending an electrician apprenticeship program a friend of Matt Sparkman’s asked if he’d be interested in a position as a rigger and crane operator at his company. It didn’t take much to persuade Sparkman to switch course. “It was a fascinating idea to me. We climbed up on a crane. I didn’t have any fear of heights. He hired me as a rigger. I went to Doc Bailey Construction Equipment in California for training. I was certified and then went through a two-year apprenticeship program with the company before logging a 40-hour week on the crane.” During his apprenticeship years he chased the hook, rigged material on mid-rise projects and inspected rigging gear. It would be six months after his NCCCO certification in 2007 that he was allowed to operate the crane unsupervised. He’s now logged

more than 10,000 hours on a tower crane and attributes his success and expertise to the multi-faceted training he received. “A solid, trustworthy team of operator and rigger is indispensable when working on a high-rise project,” he says. Besides catching beautiful sunrises and sunsets from a 30-story high vantage point, operating a tower crane has broadened Sparkman’s perspective on construction. “Being a tower crane operator gives me a unique opportunity to participate in each phase of high-rise construction,” he says. “You have to be patient and even tempered in order to deal with all the personalities on a construction site.” Whether it’s lifting a backhoe from an excavation pit or proper rigging, he enjoys the precision of the lifting as well as interacting with all the trades. While 97 percent

of crane operators are men, Sparkman welcomes the increasing number of women operating cranes. “In my observation, women operators have a strong attention to detail. They seem to care a lot. Which is good.” Career Outlook For Tower Crane Operators Sparkman is currently employed by Stafford Crane Group, the largest crane company in Phoenix. And it’s a good place to be - crane operators are currently in demand. An increase in construction of high-rise buildings, infrastructure and an ongoing need to load and unload containers at shipping docks is driving that demand. Based on years of experience, geographic location and types of projects, Sparkman says tower crane operator income varies but some can earn up to $100,000 a year. ZipRecruiter puts the national average income for tower crane operators at $79,722 as of March 2019. The Bureau of Labor Statistics reports an average salary of $60,411 in 2016 with an estimated

Page 25

339 Sumas Way, Abbotsford Call Henry: (604) 850-4654 | (604) 850-3601 ext. 226

Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. The HL900 series offers unbeatable value!

Continued on page 26

AUTOGREASERS FOR COMPACT EQUIPMENT SMALL MACHINE LUBER √ Powerful & Space Efficient √ For any compact equipment

$36,000 2005 VOLVO EC35, c/w Enclosed ROPS, 2 Buckets, Hydraulic Thumb, Blade, 3,994 Hrs., Runs very well!

$38,000 1990 JOHN DEERE 490, c/w Enclosed Cab, 2 Buckets, Q/C, Hyd. Thumb, 28” Pads, 65% U/C, 9,653 Hrs., Good Running Unit.

√ Services up to 12 grease points √ Handles up to an NLGI #2 grease √ Uses standard grease cartridges $33,900 • Stick Cylinder Pins

2000 JCB 214 lll, c/w Enclosed Cab, 4WD, Extenda-hoe, 2 Buckets, 4-in-1 Bucket, Forks, 8,540 Hrs .

• Stick/Boom Pivot • Boom Cylinder Pins

$44,500 2001 MOROOKA MST600VD, Reconditioned Unit, New Tracks, 2-Spd., 2,401 Hrs., Low Ground Pressure, Great for fencing! Runs Well.

• Boom Base • Swing Cylinder Pins • Upper/Lower Boom Swing Bearings

For Total Lube Solutions,

Components by:

GO WITH THE FLO! Mississauga 1.800.668.5458 Winnipeg 204.832.3040 sales@flocomponents.com www.flocomponents.com

$69,000 2005 Volvo EC290B LC, c/w Enclosed Cab, 2 Buckets, Q/C, Hydraulic Thumb, 80% U/C, 11,059 Hrs.

$214,000 2017 Hyudai HX220L, c/w Back-up Camera, 2 Buckets, Hyd. Q/C, Hyd. Proportional Thumb, 3-yr. Warranty, 3-yr. 0% Financing, 1 Unit Left!.

www.handlersequipment.com


Page 26

Supply Post · supplypost.com

Continued from page 25

job growth rate between 2014 and 2024 at 8.6 percent, which is higher than the projected national workforce growth of 7.4 percent. Tower Crane

Technology Advances Technology improvements are making life better for crane operators. “The digital readouts in the cab minimize the need to make manual calculations on weight,

swing speed and counter swing,” Sparkman says. Other technology he appreciates as a tower crane operator include cameras, electronic grease guns for maintenance and limit switches.

“I have operated a crane with a camera attached to the hook block and it was very helpful. It’s a big stress reliever when picking in the blind. Electronic grease guns make greasing

For more info contact:

Bob Robertson

MOBILE: 604-220-2174

339 Sumas Way, Abbotsford

bob@handlersequipment.com

Hyundai HX220L Excavator

Hyundai 955XT Loader

Providing our customers with equipment to meet tough jobsite demands and supporting them with the best service in the industry – that is our promise.

www.handlersequipment.com

Allu is the world market leader in Screener Crusher Buckets. New and Used Buckets Sales and Rentals Replacement Parts in stock

September 2019 much easier and faster. All cranes have limit switches that prevent overloading. In tower cranes they are called moment switches. Basically, once they hit 95100 percent the switches engage and prevent the crane from moving any further in that direction.” He also appreciates how tower cranes operate with low impact to the environment. “Once permanent power is run to the tower crane the diesel generator is no longer needed, so towers are basically zero emissions as they are 100 percent powered electrically.” One of the advantages working at Stafford Crane Group Sparkman says is their ability to design their own cranes, including some with bathrooms. This is a feature he appreciates during long days on the jobsite. Sparkman recently finished work on The LINK, a luxury, multi-use 31-story tower in downtown Phoenix. The project required lifting 20,000-pound platforms. “It’s a dance with riggers,” he says of the feat. “A crane moves,

PROUD DEALER OF:

ATTACHMENTS & EQUIPMENT SALES AND RENTALS NEW & USED PARTS CALL US TODAY! 1-844-802-4490

www.arrowwest.com

flexes, creaks. You have to get used to it, the physics of it. You have to be very aware of conditions.” There have been a number of times when his “heart rate elevated.” That’s because he knows if all doesn’t go right someone could get hurt. “Safety is paramount. There is a balance between moving quickly and moving safely,” he says. Sparkman shares some spectacular views from his crane on social media. b Source: Conexpo

Browse Thousands of Equipment & Truck Listings at .com

FMS attachments meet or exceed the competition in quality, fit and finish with a one year warranty on materials and workmanship.


September 2019

Supply Post · Our Readers Are Your Buyers

www.morookacarriers.com

1-877-667-6652

e s lin art ll fu a p s! k r a oo ack r fe r of Mo r t e e W EM bb O ru & of

WE KEEP CANADA ON TRACK

Page 27


Supply Post · supplypost.com

Historic Bugatti Vehicles Increase In Value, Including More Recent Models Bugatti vehicles have always been exclusive. but with age their value increases, as shown by an analysis of individual historical vehicles. in particular, the super sports cars of the eb110 series and the veyron hyper sports cars are increasing in popularity among collectors – so

prices are rising, too. The EB110 is the modern super sports car built by Bugatti between 1991 and 1995 that set several world records. The engine is a 3.5-litre V12 mid-engine with four turbochargers. Drive power is permanently transmitted to all four wheels. Two

camshafts per cylinder bank and five valves per combustion chamber ensure a fast charge cycle. Depending on the model and configuration, the engine produces between 560 and 610 hp. The EB110 sprints from 0 to 100 km/h in up to 3.3 seconds, making it the fastest series-

production car of its time. Its maximum speed is 351 km/h – a world record for a series-production sports car. Only 96 EB110 GT and 32 EB110 Super Sport were produced up until 1995. At the time, the super sports car in its GT version cost at least ITL 450 million – including maintenance and wear parts for the first three years, while the Super Sport started at EUR 550 million. Value levels are developing very positively Prices have risen significantly over the past eight years. According to

ESCO® Attachments

Bucyrus Blades™ Snow Plow Edges

MaxDRP™ Replacement Teeth

OPTIMIZE MACHINE PERFORMANCE WITH ESCO AND LSW WEAR PARTS Ultralok® Tooth System

lswwearparts.com www.esco.weir

ESCO® Manganese Crusher Wear Parts

Fredericton, NB 506-458-5613

Truro, NS 902-895-4913

Copyright ©, WEIR and the WEIR Logo are trademarks and/or registered trademarks of Weir Engineering Services Ltd.

RAMSEY COMPANY INC. Office: (360) 748-8918 | Jim Ramsey (360) 269-3437 | Jack Ramsey (360) 269-0902

September 2019

BUGATTI

Page 28

an analysis carried out by Classic Analytics, a company that monitors the market and evaluates classic cars worldwide, the value of the Bugatti EB110 GT has increased from EUR 280,000 in 2011 to a multiple of that amount. At an Sotheby’s auction for a 1994 EB110 Super Sport in February 2019, a bidder paid approximately EUR 2.03 million (USD 2.33 million). “When Bugatti launched the Veyron in 2005 it moved more into the focus of interested buyers, and this had an impact on the price development of many models. Since the appearance of the new Chiron in 2016 there has been a significant price boost among more recent historic vehicles such as the EB110,” says Frank Wilke, Managing Director of Classic Analytics. The EB110 has all the hallmarks of a sought-after classic: with its V12 engine, four turbochargers and all-wheel drive, the super sports car offers exceptional technology and sensational driving performance; what is more, it is also extremely exclusive since only 128 were built. Bugatti made history repeat itself in 2005. With the Veyron 16.4, the French manufacturer catapulted itself into a new dimension. Like the EB110, the Veyron was a hyper sports car for the modern era – made by Bugatti in Molsheim. Once

again the French manufacturer opted for a carbon monocoque, four-wheel drive and four turbochargers. But in this case, 16 cylinders generate an output of more than 1,000 hp. The engine achieves a top speed of more than 400 km/h, accelerating the Veyron from 0 to 100 km/h in 2.5 seconds, and to 200 km/h in 7.3 seconds. The Veyron and its offshoots have broken several world records, redefining what top-level automotive construction is capable of. Production of the Veyron began in 2005 at the newly created workshop in Molsheim, Alsace – the brand thus returned to where it was founded 110 years ago under the name Bugatti. Only 450 Veyron were produced by hand up to 2015, selling at prices of at least EUR 1.16 million. These include various exclusive special models which are now sought-after collector’s items. Their value has hardly fallen in recent years. More recent used vehicles achieved an average price of EUR 620,000 at international auctions and dealerships in 2011; two years later this had already gone up to EUR 730,000. Currently it’s virtually impossible to find a Veyron on the market for less than EUR 1.3 million, with certain models fetching even considerably higher prices. b Source: Bugatti

THE FINEST BUCKETS, SYSTEMS, TRAINING AND DESIGN!

Reach out over 1,500' | Dig to 120' or more! Turnkey systems from 4 - 15 cubic yards! Sand, Gravel, Mud & Slurry - We can dig it!

VISIT US ONLINE: WWW.RAMSEYCOINC.COM


September 2019

Supply Post · Our Readers Are Your Buyers

Page 29

Transform Your Excavator Into an Efficient, Multi-Functional Tool Carrier

DISCOVER WHAT ROTOTILT® CAN DO FOR YOU Backed by over 30 years of experience, Rototilt® transforms your excavator and backhoe, old or new, into a job site moneymaker. With 400 tilt and 3600 rotation, you can expedite more jobs efficiently, work within confined spaces and increase safety on the job site with reduced manpower. Rototilt® grows your business. From general excavating to back filling, grading and anything you can think of...Rototilt® does it all, generating tremendous time and labour savings with increased profitability. See Rototilt® at work, and listen to what our customers say at rototilt.com or go to youtube.com/RototiltNorthAmerica Contact us at: (519) 754-2195

Visit Us At Booth # 1206 rototilt.com


Page 30

Supply Post · supplypost.com

John Deere 850L Dozer Pushes Productivity To The Next Level Designed to meet the demanding needs of today’s earth movers, the new John Deere 850L Dozer boasts the productivity, reliability, and durability customers expect in a production dozer. A few of the customerinspired updates include a larger displacement engine, increased operating weight, new operator station, and several improvements to maximize reliability and durability. “Our K-Series dozers are a favorite with customers, and thanks to their ongoing feedback, the next

generation of Deere dozers are our strongest, most durable and productive yet,” said Nathan Horstman, crawler product marketing manager, John Deere Construction & Forestry. “The 850L combines muscle, efficiency and balance for impressive new levels of performance. Coupled with an extraordinary focus on reliability and uptime, you have the winning combination our customers are asking for.” The 850L incorporates an EPA Final Tier 4 John Deere PSS 9.0L diesel engine that provides a 10

METSO

Langley, BC

Tel: 604-866-0482

NORSTONE EXCAVATING

percent increase in horsepower. At 225 horsepower (168 kW), the 850L has more horsepower than any dozer in its size class. Equipped with the popular Eco mode feature, fuel consumption is reduced by up to 20%, without sacrificing performance. Auto-idle and idle shutdown are standard which further minimize fuel costs. Like all John Deere dozers, the 850L features a dual-path hydrostatic transmission, now with 13 percent larger pumps than the K-Series. The new dozer is available the widest Power Angle Tilt (PAT) blade in its class. At 172-inches (4369 mm), the new blade increases productivity, especially in grading applications. All 850L configurations now utilize an eight-roller design with 130-inches (3302 mm) of track on ground, increasing productivity, stability, and gradeability. The Dubuque, Iowa manufactured dozer also comes standard with grade control-ready electrohydraulic (EH) valves – making it easy to add a grade control system. Owners also have the ability to

September 2019

purchase the machine with John Deere SmartGrade™. This technology is integrated into the dozer – eliminating external cables to the masts, which reduces breakage, and the removal of the masts from the blades helps decrease vulnerability to theft and damage. SmartGrade technology removes the need to install blade-mounted sensors and components daily, reducing setup time, and allows operators to get more work done. Inside the cab, a new operator station was designed with input from the John Deere Customer Advocate Group. The cab has 15 percent more space and interior operator noise was reduced by 27 percent when compared to the K-Series model. A new, angled seat keeps operators comfortable while using the rear implement or looking rearward. The new HVAC system incorporates a long-life brushless motor for improved airflow to keep operators comfortable all day, no matter the conditions outside the cab. Additionally, a new heated and ventilated seat option further increases

operator comfort. Other new options on the 850L include a rear camera and automatic temperature control. The 850L boasts allnew, ergonomic control joysticks for the transmission and hydraulic functions. The new transmission joystick has a rocker switch to control the forward-neutral-reverse (FNR) direction of travel and the hydraulic control lever includes a proportional thumb roller precise blade angle or power pitch adjustments. Other buttons are available to enable grade control, increment/decrement grade control, blade shake (PAT only), and return to pitch (outside dozer only). Designed with reliability and durability in mind, the 850L features improved electrical and hydraulic routing, and a heavy-duty mainframe with increased thickness by as much as 60 percent in some areas of the machine to combat the rigors of the jobsite. The dozer’s cooling package was also upgraded with larger fin spacing and a simplified design allowing full access to both sides of the cooler.

The 850L is equipped with a tilt cab that can rise up to 65 degrees, providing unmatched access to major machine components. This feature increases uptime by reducing downtime during repairs or adjustments to major electrical, hydrostatic, and hydraulic system components. No matter the intended application, owners can customize their 850L with John Deere-designed, factory-installed configurations, including wastehandler, forestry protections, mechanical angle blade and a purpose built pipelayer-ready model. Fleet managers looking to get the most out of their 850L can rely on their John Deere dealers to provide Ultimate Uptime, featuring John Deere WorkSight. With Ultimate Uptime, owners receive predelivery and follow-up inspections that include five years of JDLink Ultimate telematics, machine health prognostics, remote diagnostics, programming capabilities and the ability to add dealer-provided uptime solutions to a customized package. b Source: John Deere

Sept. 10, 11 & 12, 2019, Canada’s Outdoor Park, Woodstock, Ontario 2019 Field Demonstration Lineup  Tillage of Cover Crops  Fertilizer Spreaders  Strip-Tillage  NEW Roller Crimper

 NEW The Evolution of Farming Demonstration featuring Dot Technology Corp, presented by

PLUS: Crop Plots and Livestock Handling Equipment Demonstrations See 750 exhibitors showcasing the latest agricultural products and services through interactive displays and live demonstrations of machinery, livestock, crops, niche markets and much more!

outdoorfarmshow.com | 1-800-563-5441 | #COFS19 info@outdoorfarmshow.com @outdoorfarmshow Canada’s Outdoor Farm Show @outdoorfarmshow


September 2019

Supply Post · Our Readers Are Your Buyers

GAIN GROUND. Success for your operation is built on productivity and John Deere’s 210G LC Excavator delivers the output you need. Precision controls, unmatched metering, and smooth multifunction operation let you finish the job faster and at a lower cost. And, Topcon 2D and 3D grade control systems maximize the capacity of your 210G, making it easier than ever to control material usage and eliminate over-excavating. Best of all, these machines are backed by Brandt; the best-trained and most committed 24/7 after-sales support team in the business. That’s Powerful Value. Delivered.

NEED FAST, FLEXIBLE FINANCING? WE DELIVER.

brandt.ca 1-888-227-2638

Call TOLL FREE: 1-855-711-4545 or visit brandtfinance.com

Page 31


Page 32

Supply Post · supplypost.com

September 2019

FEATURED USED INVENTORY $59,000

$210,000 $419,900

$59,900

6T1346 - Quesnel

2012 Western Star 4900

15E3228 - Langley

15E3227 - Langley

6C1348 - Quesnel

2016 Case 921F

2013 Case 580SN 4

2014 Kenworth T800

5,483 hrs

8,565 hrs

500,992 km

338,349 km

$329,000

$89,900

$419,900

$249,900

17T1077 - Kelowna

3E785 - Kamloops

2016 Tigercat 870C

2014 Kenworth T800

2016 Tigercat 630E

4,693 hrs

633,127 km

6,504 hrs

37E4105 - Campbell River

2E396 - Penticton

2014 Tigercat L870C 8,200 hrs

$89,900

$129,300

$32,000

$35,700

$219,900

1T6086 - Prince George

15E3242 - Langley

37E4119 - Campbell River

1E952 - Prince George

2015 Kenworth T800

2016 Kubota U17

2015 Caterpillar 249D

2015 Hitachi ZX210F3

479,910 km

196 hrs

781 hrs

11,280 hrs

$52,500

$143,500

$319,000

$42,900

15E3259 - Langley

1E892 - Prince George

1E947 - Prince George

2018 Case CX37C

2014 Case 821F

2017 Link-Belt 210X2PHN

2017 John Deere 318G

6,757 hrs

5,530 hrs

42 hrs

268 hrs Brandon 204-728-6681 Estevan 306-637-2121

Burnaby 604-291-6431 Fort St. John 250-785-6105

Regina 306-569-9021

Campbell River 250-287-8878

Kamloops 250-374-4406

Saskatoon 306-931-1911

Castlegar 250-365-2807

Kelowna 250-769-2933

Swift Current 306-778-2390

Chilliwack (Parts) 604-701-0984

Langley 604-607-0300

Terrace 250-635-2292

Cranbrook 250-426-6205

Nanaimo 250-758-5288

Vernon 250-545-4424

INLAND-GROUP.COM

5E905 - Williams Lake

Dawson Creek (Parts) 250-784-0934

Penticton 250-492-3939

Whitehorse 867-668-2127

Prince George 250-562-8171

Williams Lake 250-392-7101

Delta 604-952-1280 Quesnel 250-992-7256

Winnipeg 204-694-3874


CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER

SECTION 2

WWW.SUPPLYPOST.COM SEPTEMBER 2019 · PAGE 33

Call Toll Free in Western Canada:

1-888-852-9021

COMPACT CRUSHING & SCREENING EQUIPMENT

· EVOQUIP BISON 280 TRACK MOUNTED JAW CRUSHER

IN STOCK FOR SALE OR RENT

EVOQUIP COBRA 230 TRACK MOUNTED IMPACT CRUSHER

NEW CALGARY LOCATION: 234085 Wrangler Rd. SE Calgary

Call us at: 403-369-6750

USED EQUIPMENT IN STOCK - ALL UNITS PRICED TO SELL!

Mormak 24" x 36" Jaw Crusher

2017 Powerscreen Chieftain 1700 3-Deck Screener

2013 Maxtrak 1000 40" Cone Crusher

Washing Systems

www.ForemanEquipment.com


Page 34

Supply Post · supplypost.com

September 2019

info@skreenquip.com

1-800-205-6633

DEALER FOR BC

TEREX FINLAY J-1160 JAW CRUSHER • Tier 4F Caterpillar C7.1140kW (188 hp) • 40” x 24” Single Toggle Jaw Crusher

NEW AND USED INVENTORY FOR RENT OR PURCHASE • 65’ / 80’ / Tracked Conveyors

• J-960 Jaw Crusher 36” x 24” / CAT C7.1

• 683 Screener 12’ x 5’ Double Deck, 14’ wide hopper

• J-1160 Jaw Crusher 40” x 24” / CAT C7.1

• 693+ Screener 20’ x 5’ Double Deck, 48” wide main belt

• J-1170 Jaw Crusher 28” x 44” / Scania DC09

• 863 Screener 9’ x 4’ Double Deck, 40” wide main belt

• J-1175 Jaw Crusher 30” x 42” / CAT C9

• 883+ Scalper 16’ x 5’ Double Deck Reclaimer

• C-1540 Cone Crusher 40” / Scania DC09

• Nordmann K-750 Compact Hook Lift Jaw Crusher

• C-1545 Cone Crusher 45” / Scania DC13 450hp

MORE NEW & USED STOCK WEEKLY!!

7801 Vantage Way, Delta BC

skreenquip.com


September 2019

Supply Post · Our Readers Are Your Buyers

John Deere 470G LC Excavator Now Features Grade Guidance Technology Power and precision converge with the new grade guidance technology-equipped John Deere 470G LC Excavators. First introduced for the 210G LC and 350G LC Excavators, John Deere developed this solution in cooperation with Topcon Positioning Group. The integrated grade guidance

system provides the operator with the bucket’s location in relation to a 2D reference or 3D design surface. This information arms operators with the detail they need for precision excavation projects, such as digging trenches for pipes, shaping ditches or slopes or digging structure foundations.

HEAVY EQUIPMENT PARTS & REPAIRS FULL REPAIR FACILITY-FIELD SERVICE

Servicing all major brands CAT, HITACHI, VOLVO, KOMATSU, DEERE, HYUNDAI

INTERIOR DIESEL LTD. Parts, Service and Sales for Mining, Forestry & Construction.

Call today!

250.374.3443

“Accuracy and productivity are critical to our customers, and the new integrated system provides them with just that,” said Jonny Spendlove, excavator product marketing manager, John Deere Construction & Forestry. “With this integrated solution, the system’s sensors are protected from damage and the display is conveniently placed in the cab. Additionally, this technology is fully supported by the customer’s John Deere dealer, eliminating downtime and expediting earthmoving operations.” Equipped with a display in the operator station, the grade guidance system provides operators with the elevation and position of the bucket cutting edge with respect to a target plane (2D) or design surface (3D). Support through the JDLink telematics system provides information on system utilization and allows rapid diagnosis of problems. b Source: John Deere

Page 35

WE SELL WHAT WE KNOW & WE KNOW WHAT WE SELL©

SALES • RENTALS • PARTS OFFICE: 780-463-7077 | CELL: 780-887-7123 email: grant@groundw.com • EDMONTON • CHILLIWACK (604) 991-9779 • SASKATOON • WE SHIP ACROSS CANADA

TRACK 616 SCREENER 616 DOUBLE DECK - CAT 4.4 ENGINE - 3 PRODUCT CONVEYORS BALL DECK - REMOTE TIPPING GRIZZLY & FEED SPEED

NEW!

NEW 2018 SCALP JAW

USED TELSMITH SBS 44 CONE

MINYU 26 X 42 JAW - HYD SHIM ADJUST TELSMITH 616-2 MED DUTY SCALP JAW POWER CORDS - HYD LEGS

2012 SBS44 – 300 HP CONE – 9900 HRS INC. LUBE TK., COOLER, & HYD . PACKAGE INC. COMPLETE CONE INSPECTION

2045 W Trans Canada Hwy, Kamloops, BC, V1S 1A7

RENTAL

HYDRAULIC BREAKERS

DESIGNED TO HANDLE THE TOUGHEST ROCK EXCAVATIONS AND LARGE CONCRETE DEMOLITION PROJECTS. 3 YR LIMITED WA R R A N T Y

DOPPSTADT 3060K SHREDDER USED 2015 DOPPSTADT 3060K - 1700 HRS - BIO-POWER - 42 SHAFT TEETH, 495 HP MERCEDES TIER III, MAGNET, HAND HELD REMOTE OPERATION ******** 6 MONTH OR 500 HR WARRANTY *********

30 X 42 JAW PLANT NEW 2018 MINYU 30 X 42 JAW – VGF WITH VARI-DRIVE – ELECTRIC PANEL INC. RUN-ON-LEGS – BOOSTER MOUNTS

DUAL SPEED IMPACT FREQUENCY ALLOWS THE HAMMER SPEED TO BE ADJUSTED FOR MAXIMUM PRODUCTIVITY.

NEW 2014 POWER VAN 53’ TANDEM AIR RIDE, DOUBLE WALLED DIESEL TK SWITCH GEAR, INC. 300HP & 150 HP. SOFT STARTS 10’ CAB/TINTED GLASS/A/C/HEAT/CONSOLE, CUMMINS 500 KW GENERATOR

MAGNUM ATTACHMENTS WILL GIVE THE WORKING END OF YOUR MACHINERY SUPERIOR PERFORMANCE AND DURABILITY.

2214 9TH LINE, BRADFORD, ON L3Z 3T1

416.679.8752 | 1.877.640.2862 | FAX 416.679.8753

616 DIESEL SCREENER 616-2 DECK - BALL DECK - CAT DIESEL TIPPING GRIZZLY - ROAD LEGAL

NEW DOPPSTADT 726 TROMMEL

SCREEN MACHINE 514 TRIPLE

DEUTZ WATER COOLED DIESEL 5/8” NON PLUGGING PUNCH PLATE DRUM AUX HYDRAULIC OUTLET

2017 - 514 TRIPLE DECK - CUMMINS DIESEL REMOTE TIPPING GRIZZLY - 4 FOLD OUT CONV., RENTAL AVAILABLE.

FINANCING AVAILABLE O.A.C WWW.GROUNDWORX.CA


Page 36

Supply Post · supplypost.com

TIER 4 FINAL VOLVO GENERATORS Designed for the Aggregate & Mining Markets

560kW & 625 kW Models In Stock

• Compact, simple design; Standard & Low profile • Built with Heavy Duty components • No DPF models • Low cost of ownership • Local parts & service support

CALL YOUR NEAREST BRANCH TODAY! Delta, BC Edmonton, AB Calgary, AB Winnipeg, MB

1-877-946-5531 1-877-455-2260 1-877-720-3735 1-877-949-1526

www.frontierpower.com

September 2019

New & Noteworthy At 2019 ICUEE-The Demo Expo ICUEE 2019 is just a month away: don’t miss this largest ever utility construction industry gathering with more new and expanded events. ICUEE, the International Construction and Utility Equipment Exposition will be held October 1-3 at the Kentucky Exposition Center in Louisville, Ky. It is the leading event for utilities and utility and construction contractors seeking comprehensive insights into the latest industry technologies, innovations and trends, focused on electric transmission and distribution, telecom, cable, natural gas, water and wastewater, and vegetation management. ICUEE 2019’s new UTV Test Track puts attendees in the driver’s seat with the opportunity to compare several models of utility terrain vehicles (UTVs) from three of the leading manufacturers, Caterpillar,

Bobcat, and John Deere. This 80,000-square-foot area adjacent to the Underground Demo Lot (Area K) and Broadbent Arena will feature manufacturer UTV displays and test-drive courses for hands-on evaluation of machine capabilities. The first-ever ICUEE Live! at Fourth Street Live! Concert offers a fun event to meet up with old and new industry friends in the downtown Louisville Fourth Street Live! dining and entertainment complex. Free to all attendees, the concert will be held Wednesday, October 2, starting at 7 p.m., and will feature music from The Crashers & Soul Circus. Concert sponsors are Bobcat, Freightliner, Nesco Specialty Rentals and I Make America. ICUEE is a big show: adding to the convenience options at the show is a new Food Court Patio area, featuring Louisville’s most

ICUEE 2019 will cover more than 30 acres of the industry’s latest technology and equipment, hands-on equipment test drives, and interactive product demonstrations - with more than 240 product categories and more than 200 new exhibitors joining longtime favorites. They’re all there to help attendees find the right jobsite solutions. Take advantage of new and expanded learning opportunities from education on the show floor to interactive crisis-simulation planning: • Disaster-simulation labs with Desi Matel-Anderson, FEMA’s first and former Chief Innovation Officer • Field classrooms where instructors are hands-on with equipment on the show floor • Eat and Learn workshops with Tuesday lunch and Wednesday breakfast and lunch Use the online show planner and show mobile app to make your personalized must-attend show schedule of events. For the latest information, visit www.icuee.com. b

iconic food trucks, with plenty of seating. The area will be conveniently located between the Above Ground Demo Lot (Area L) and the Lift & Haul Demo Lot (Area N). A new Emerging Technologies Pavilion joins expanded Safety and Fleet Management exhibit pavilions on the indoor show floor. These pavilions help group specific types of exhibitors to make it even easier to spot what’s new, making them a “can’t miss” feature at ICUEE. The show’s closing Bourbon, Beer & Bites networking reception for all attendees offers complimentary tastings of the food and beverages of Louisville. The event is Thursday, October 3, from 2 to 3:30 p.m. in the Kentucky Exposition Center North Lobby. The event is sponsored by Louisville Tourism, Kentucky Exposition CenSource: ICUEE ter and Levy Restaurants.

RLC AGGREGATE EQUIPMENT FOR SALE · RENT · OR RENT TO OWN Call 1-833-706-9458 | Email: info@rlcagg.ca

QUALITY AGGREGATE EQUIPMENT

Hikon 36x75 Radial Stacker Hyd. Raise/lower, 100’ wire, brakes & lights

6’x10’ Control Tower 25000BTU A/C Tinted safety glass & shades, c/w all hardware to install in van

New & Used Power Vans Call for more info

24” Landing Pads for Heavy Loads $20 EACH

JP 36x80 & 36x100 Radial Stacker Full hyd., CEMA C., 100’ wire

FabTec Contractor Plant 6x12 2-Deck Screen 150kW Genset

Hikon 3033-12 Feeder 100’ Cord, hyd. raise/lower grizzly 6” spacing

JP 36x60 & 42x40 Radial Stacker, 20 HP #4 Dodge, belt scraper (optional hyd. raise/lower, hyd. lift axle, hyd. motor drive)

POWER VANS/GENERATORS/SCREENERS: New Build, 27-Stations, 400 HP Soft-Start, 6x10 Tower, 1,266 Gal. Enviro Tank, No Gen Set................................................ POR 2007 53’ Tri Axle Power Van, 33-Stations, 400 HP Soft-Start, 6x10 Tower, Large Cap. Enviro Tank ............................ $205,000 2007 53’ Power Van, 32-Stations, 400 HP Soft-Start, 6x8 Tower, 1,266 Gal. Enviro Tank, 500kW Gen ...............................SOLD Un-used 2015 100kW Van c/w U-Haul Trailer & Used 2015 Cummins 150kW Power Van Electrical...................................... POR Used 2014 Total Rebuilt Cummins 600kW & 2017 Cummins 600kW 3,640 Hrs. & 2013 CAT C-18 600kW, 7,555 Hrs............. POR 2010 Fab-Tec 5x16 Contractor Plant c/w 150kW Gen Set w/ Electrical (3) Extra Plugs .......................................................... POR New P7203 Cedarapids Screen Plant & Superior 4x8 Dewatering Screen (used 1 month) ................................................... POR 2014 JCI 6x20 3-Deck Portable Screen Deck, c/w 2 Cross Conveyors & Elec. Panel................................................................ POR

JAW PLANT/CONVEYORS/FEEDERS/SPLITTER CHUTES/PARTS: New JP Radial Stackers, 36x40, 36x60, 36x80, 36x100, 42x40 ............................................................................................... POR New 2018 KPI/JCI 33-36150 Super Stacker & Used 2018 KPI/JCI 36x135 Super Stacker ........................................................... POR New JP Triple Stack Conveyors, 36x60, 36x70, 42x60, 42x70.................................................................................................. POR Used Radial & Transfer Conveyors, 30x50, 30x60, 36x50, 36x60, 36x75 & Kolberg 36x70 Roll Pack ................................... POR New JP 14 Yard Skid Feeder (Hydraulic Grizzly Option) ........................................................................................................... POR 2005 & 2007 30 cu/yd. Surge Bin (refurbished & painted) ..................................................................................................... POR Un-used 2017 Hikon 3033-12 Feeder with Grizzly ..............................................................…………………………………………….POR New 2017 Pioneer 2056 Jaw, 50” x 20’ VGF, Plant Mounted Electrical...................................................................................POR

View Complete Inventory at www.rlcaggregateequipment.ca


September 2019

Supply Post · Our Readers Are Your Buyers

Page 37

QUALITY NEW & USED AGGREGATE PROCESSING EQUIPMENT FOR SALE OR RENT

SPECIALTY PRICING AVAILABLE NOW!

JCI KODIAK CONES IN STOCK, Available for immediate delivery 200 thru to 500 HP. Choice of liners and drive configurations ...........................................................CALL FOR SPECIAL PRICING.

2015 MORMAK BUILT MVP450 PLANT Cone was rebuilt with recent inspection showing ,excellent condition. Off plant infeed conveyor with magnet included, Twin 200 HP cone drive motors. ............................................$385,000 OBO.

CONVEYORS IN STOCK! 60’, 80’, 100’, 125’, 150 ................. ................................CALL FOR FULL DETAILS AND PRICES.

JCI HORIZONTAL SCREENS IN STOCK, Available for immediate delivery 6’ , 7’ and 8’ models in two & three decks. Finishing or scalping configurations................................................CALL FOR SPECIAL PRICING.

KPI 2500 VSI. 2500 VSI Crusher, On Chassis, Fully Self Contained, Discharge Conveyor, completely re-conditioned. ...................................FOR SALE OR RENT!

SANDVIK QH440 TRACK CONE CRUSHER, Cat C13, 440 HP .....................................................FOR SALE OR RENT!

COMPLETELY REBUILT JCI KODIAK K300 CONE PLANT. On plant switch gear. ............................FOR SALE OR RENT!

KPI LOG WASHER. 48” X 35’, Like new condition. 200 HP, 460 Volt drive, FOB Edmonton. ........... FOR SALE $175,000,

SALES CONTACTS: William Thompson Hugh Porter 780-474-8082 604-657-7167 Willie@chieftainequipment.com hugh@lonetrack.ca

Equipment (2017) Ltd.


Page 38

Supply Post · supplypost.com

Community Benefits Plan For Gordie Howe International Bridge Project Representatives from Windsor-Detroit Bridge Authority (WDBA), its private-sector partner, Bridging North America as well as the State of Michigan and the Government of Canada, unveiled a comprehensive and robust Community Benefits Plan for the Gordie Howe Inter-

national Bridge project. The Community Benefits Plan is comprised of two components: the Workforce Development and Participation Strategy and the Neighbourhood Infrastructure Strategy. In partnership with WDBA and Bridging North America, more than 30 agencies

Celebrating 10 Years! I would like to take this opportunity to thank all customers, past and present, for helping us achieve this milestone. It’s been an epic journey, and I want to thank each of you. Looking forward to providing an even greater level of Service to you going forward! We’re working harder, so you don’t have to! FOR SALE: PKG OF GOOD USED/REBUILT CAT HAUL TRUCK COMPONENTS Call For Details • TIRES: 16.00R24, 29.5R25, 30.5 X 32. • REBUILT 3304/3306 ENGINE PARTS/BLOCKS, CAT LOADER AXLES AND FINAL DRIVES JUST ARRIVED CONSIGNMENT SALE: 966D/E/F HYDRAULIC QUICK ATTACH

Kamloops, BC., CALL GRAHAM: 250-851-1100 | 250-573-4181 (Office/Fax) | bgparts@telus.net www.bgparts.ca

and organizations will support the implementation of the plan. The Workforce Development and Participation Strategy is geared toward engaging businesses and providing employment opportunities including workforce development, training and pre- apprenticeship/apprenticeships. There are more than 80 workforce initiatives focusing on opportunities for Windsor and Detroit residents and businesses and Canadian Indigenous Peoples and their businesses. Some highlights of the plan include: • The implementation of a Regional Small Business Purchase Protocol to foster growth of small companies in the region • Partnerships with local workforce development agencies to encourage applications from local applicants for jobs, training and skill development opportunities

Support to pre-apprenticeship/apprenticeship programs and opportunities for Indigenous women, students and youth. The Neighbourhood Infrastructure Strategy is a $20 million (CDN) direct community investment on both sides of the border developed by public feedback and input. Collectively 29 initiatives are identified in the strategy for implementation in Windsor, Detroit and Walpole Island First Nation. Some highlights of the plan include: • Approximately $8.1 million for aesthetics and landscaping • Approximately $3.5 million for community safety and connections • Approximately $2.2 million for community partnerships • Approximately $1.1 million for economic benefits. WDBA and the State of Michigan will be directly involved in the delivery of the Community Benefits Plan and will provide stringent oversight to ensure the commitments outlined are achieved and reported on. Quotes “The Gordie Howe In-

September 2019 ternational Bridge will positively impact the flow of traffic and goods, help businesses get their goods to market, and make it more efficient for travellers, commuters and shoppers to cross the border. In addition to the 2,500 direct jobs Bridging North America expects to be created by the project, the comprehensive Community Benefits Plan announced today will have wide-ranging positive social, economic and environmental impacts on Windsor-Essex and Detroit including targeted workforce development initiatives that will foster training, business opportunities, and local employment for workers including First Nations, youth and women,” said The Honourable François-Philippe Champagne, Minister of Infrastructure and Communities. “The Gordie Howe International Bridge is yet another historic example of what we can accomplish when we work together to find a solution that benefits everyone. We all know that the people in our communities on each side of the border will be a strong anchor point for this project, which

is why this announcement today to invest in these areas is so critical. This is a real opportunity to create thousands and thousands of jobs and strengthen our economic ties with our neighbors to drive growth in the surrounding communities for generations to come,” said Michigan Governor, Gretchen Whitmer. “The Gordie Howe International Bridge Community Benefits Plan is uniquely ambitious and is a result of significant community consultation held over a four-year period. The plan’s initiatives are designed so that the people located most directly adjacent to the Gordie Howe International Bridge project will be among its truest beneficiaries. The Community Benefits Plan will help to create jobs and better local communities,” said Bryce Phillips, CEO, Windsor-Detroit Bridge Authority. Details of the Gordie Howe International Bridge Community Benefits Plan are available at www. GordieHoweInternationalBridge.com. b Source: Gordie Howe International Bridge website

www.genagg.ca

AGGREGATE EQUIPMENT YOU WANT. PARTS YOU NEED. SERVICE YOU DESERVE.


September 2019

Supply Post · Our Readers Are Your Buyers

40,000 Near Hits Reported At Victor Mine Since Launch In 2010 The De Beers Group Victor Mine in Northern Ontario has racked up an impressive new safety milestone after the 40,000th Near Hit was reported last week. The Near Hit Reporting program started at Victor Mine in 2010. A Near Hit is a hazard that could have resulted in an injury or incident. Employees are encouraged to not only report the hazard but also take immediate steps to eliminate it. Hazards that cannot be correct by an employee are brought to the attention of mine managers, who develop plans to address the concern. Since the program started, safety performance has improved

each year, with a corresponding reduction in injuries. This has earned Victor Mine two national John T. Ryan Safety Awards (2015, 2016) and two eastern region John T. Ryan Safety Awards (2017, 2018) as well as numerous local individual and team safety awards. The milestone Near Hit came as the mine marked three consecutive months with no injuries (May, June and July). There have been only three minor injuries at Victor Mine since the start of 2019, with 97% of all work days in 2019 completed without injury thus far. The 40,000th Near Hit Report was submitted by Darren Thomas, an employee with reclamation

contractor Tetra Tech on July 29. He is working on groundwater sampling near the west rock stockpile when he noticed that some sample bottles had leaked. As per company safety policy, he was wearing protective gloves and wasn’t harmed, and took immediate action to replace the bottles. “I would like to thank Darren and everyone on the Victor Mine team for their continued focus on safety into closure,” said Brian Kilbride, Closure Site Manager. “Without the commitment to safety of everyone working at the mine this would not have been possible, and this accomplishment continues Victor Mine’s outstanding safety legacy from construction, to production and into closure.” The mine ended production in late May after nearly 11 years of operation. Victor is now in the beginning stages of closure and continuing a reclamation program that has resulted in over one million trees being planted on the site to date. b

Page 39

SALES, SERVICE, RENTALS, AND PARTS 1-844-MORMAK1 |

Strong Heritage, Strong Future. mormak.com

TEREX ECOTEC 1600 PHOENIX TROMMEL

TEREX ECOTEC TTS520-3 TROMMEL

D

SOL MORMAK 1645-II CLOSED CIRCUIT CONE PLANT

NEW MORMAK CR6203 FEEDER SCREEN PLANT

RENT OR SALE

Source: DeBeers Group

TESAB i700 TRACK JAW, CAT POWER 28X44

TESAB TRACKED SCREENER, 5X14 2 DECK, CAT POWER

TELSMITH 6X20 INFEED SCREEN PLANT

MORMAK C.R. 2236 JAW SCALP PLANT

IN STOCK

IN STOCK

NEW CEDARAPIDS MVP380X, 300HP, IN STOCK.

NEW CEDARAPIDS MVP450X, 400HP, COMING SOON.

Terex Cedarapids: Cedarapids 1645II Closed Circuit Plant .............................NEW (4) Cedarapids MVP380X Cones .......................... NEW & USED (2) Cedarapids MVP450 Cone Plant ................................ USED Mormak HD4248 Belt Feeder ........................................... NEW Mormak Cedarapids 3042 Jaw Plants ............................ USED Mormak Cedarapids 6x20 Feeder Screen Plant .................NEW (BC) (AB / YT / NWT)

VERNON, BC 8140 Becketts Rd. CHILLIWACK, BC 7912 Atchelitz Rd.

CALGARY, AB 8815 44th St. SE EDMONTON, AB 27321 Acheson Rd.

1-844-MORMAK1


Page 40

Supply Post · supplypost.com

September 2019

The Home of Genuine

Pit Boss Equipment TM

USED ELRUS 2015 Screen-Jaw Plant with 2236 Jaw, 6x16' 2-Deck Screen, 60" Reversible Under-screen Conveyor, Hydraulic Levelling on Triaxle Chassis

Used 2007 Metso Lokotrack LT200 hp Mobile Cone Crushing Plant Nordberg HP200 Cone Crusher 210mm Feed opening Cat C13 415hp Engine

NEW ELRUS Rip Rap Plant. Makes up to four products simultaneously. 10 Cu yd Hopper, Hydraulic Side Dump Grizzly, 54" V.G.F., 36" Side Discharge Conv

New ELRUS Feeder Screen Plant c/w Sandvik SF1433 Screen, 8' x 13' Self relieving hopper assembly, Hydraulic Side Dumping Grizzly, 36 removable belt feeder,42 Screen Feed Overhead Conveyor

USED Edge TRM622 6x22' Trommel Screen, Hopper with Extensions and Tipping Grid, 48" Feed Belt, 60" Collection Conveyor, 42" Oversize Conveyor with Impact Bars

USED Sandvik QJ341 3048 Track Jaw Crusher, CAT C9.3 Tier 3 Acert diesel motor, 9.35m3 Hopper capacity, 43" x 13' Vibrating speed grizzly, 26" foldable side discharge conv, Heavy Duty Tracks w/ wireless controls

NEW ELRUS 53' Control Trailer Package w/ 6x10' Tower with Platform, Trailer to Tower Stairs, Roll Down See Through Blinds, 17' Partitioned Generator Room, Folding Ground to Trailer Stairs with Platform and Railings

New ELRUS 53' Power Van with Reverse Mounted Tower, 6x10' Hydraulic Raise & Lower Control Tower with Climate Control, Roof Top Platform, Emergency Escape Ladder, Tower to Van Stairs

ELRUS MS612 3 Deck Multi Sloped Screen, 42 Screen Feed Overhead Conv, 42 x 34’ Underscreen Conv, Two (2) 36 x 12’-6” Cross Conv and Hydraulic Levelling

NEW Superior 36” X 80' Portable Radial Stacking Conveyor Motor, 30 HP 1800 RPM TEFC V-belt drive (90% fines, 10% spherical lumps 7” minus)

1-877-979-7741

36” X 136' Low Profile TeleStacker® Conveyor, 40/30 HP 1800 RPM Motor, 800 STPH of 100 PCF material capacity

NEW ELRUS 6'x20' – 3 Deck Screen Plant w/ 42 OH Feed Conveyor, 60 Under Screen D/C Conveyor, 2 or 3 Cross Conveyors

www.elrus.com


September 2019

Supply Post · Our Readers Are Your Buyers

Page 41

SUMMER SAVINGS STACK UP Get up to $10,000 in a pre-paid Visa or a parts and service credit with the purchase of a piece of machinery*

VISIT: FRONTLINE-MACHINERY.COM EMAIL: INFO@FL-MACHINERY.COM CALL: 1.855.305.0152 *Terms and conditions apply: This offer is valid for purchases from July 1st to September 30th, 2019. All transactions must by funded by October 31st, 2019. Does not includes taxes. Offer not valid with any other offers. Credits applicable to services and parts purchased through Frontline Machinery only. Credits must by used by July 1st, 2020. Subject to credit and equipment approval. Contact Frontline Machinery Representative for more information.

CLASSIFIEDS

TO PLACE AN AD, CALL 1-800-663-4802 OR VISIT WWW.SUPPLYPOST.COM /ADVERTISE/CLASSIFIEDS ATTACHMENTS

BUSINESS FOR SALE

Snow Plow attachment with hydraulics. $500. Nanaimo, BC. admin@schaffersequip Working Landscape Rock Quarry for Sale. 15 Year ment.com lease - renewable, 190.5 PHONE: (250) 753-7232 HA, 3 types of landscape rock, 4 work areas, Area 1 Slate Quarry Site—Grayish Blue slate, no rust. Permit allows for 1600 tonnes/ year. Area 2 River rock Quarr y Site—Multi colored rock, 1/2 - 6 inches in size. River rock is known as Rainbow Rock. Permit allows for 2000 tonnes/ year. Area 3&4 Red Rock Cr ushers, Pulver izers, Quarry Site—Red Argillite. Shears! Own or Rent. Beautiful Rock. The permit vanedequipment.com allows for 2000 tonnes/ PHONE: (604) 888-9020 year per site. Rock can be stripped with an excavator PHONE: (877) 255-9293

using a ripper tooth. The material can be crushed on or off site. Equipment and inventory is negotiable for additional cost. Partnership Fa i l u r e F o r c e s S a l e . Located in South Eastern British Columbia. $589,000. JCB Endeavours Ltd jcbendeavours@gmail.com PHONE: (403) 894-5633

CAMPS

E x c a va t i n g & B o b c a t Business for Sale i n M i s s i o n , B C. I n c l . Excavator, Mini-excavator, B o b c a t , R a m p Tr u ck , Dump Truck, Eq. Trailer & Clientele Since 1990. $130,000. Ly l e ’s Bobcat & Excavating Service lylesbobcatexcavating. com lylesbobcat@yahoo.ca PHONE:(604) 302-2232

Business for Sale, Turnkey Rock Quarr y, 2 leased gravel pits, Hitachi EX225, with FOPS, hyd thumb & rock hammer, EX135 w/ blade & hyd thumb, 1999 KW gravel truck, Tridem 25 ton trailer. Nakusp, BC. Advertise your machines in PHONE: (250) 265-1029 the classifieds! Call Sheryl 4SALE 20,000m. Bill 13 for deadline and rates. Evergreen contract with CALL: 1-800-663-4802 Aspen Planers. Lillooet BC, $140,000. Also avail- WOODLOT 4SALE 1547m. able – buncher, log loader, #040. 5 year cut, ready to grapple skidder, processor harvest, all plans approved. Lillooet BC, $495,000. and logging trucks. PHONE: (250) 256-0236 PHONE: (250) 256-0236

Barco 22-24 Man Camp Barge Model 99 for Sale. Comp. rebuilt inside & out in 2018. Upgrades include hull, accommodations, water systems, furniture, bedding, flooring, and much more. Surveyed, Certified, and Insured in April 2019. Complete list of upgrades and Marine Sur vey available upon request. Over $1.2 Million invested in upgrades and enhancements. Asking $1,500,000. Located in Campbell River, BC Challenger Enterprises Ltd. ap@challengerenterprises. ca PHONE: (250) 591-0626

SEPTEMBER 2019 CONCRETE EQ.

N e a r n ew Fa s t - Way “Super-Sacker” & Auger, 10,000 lbs. capacity c/w load cells & controls, Auger with 460V motor, $27,500 OBO. HUGH: (604) 657-7167

2016 Isuzu NRR single axle c/w TS2050 concrete line pump Very low mileage truck. Pumps in good working order c/w near new concrete hose. Ready to work. $74,000 OBO HUGH: (604) 657-7167


Page 42

Supply Post · supplypost.com

BANNING EQUIPMENT LTD 8901 Penn Road, Prince George, BC Phone: 250-564-7226 · Fax: 250-564-7233 Email: scott@banningequipment.com EQUIPMENT FOR SALE

2017 - S590 Skidsteer - Bucket ....................................................$49,500 2013 - 938K Wheel Loader - Bucket/Forks ................................$127,500 2013 - 320EL Excavator Dig bucket & Thumb ...........................$205,000 2005 - TK741 Feller Buncher - HF221 22” head...........................$65,000 2004 - D6N LGP Crawler Cat - 6-way Blade ................................$99,500 1999 - D7R XR Crawler Cat Double A/tilt, ripper ......................$145,000 1998 - IT28G Wheel Loader Cat.....................................................$45,000 1993 - IT24F Wheel Loader Cat .....................................................$39,500

DOZER ATTACHMENTS

Blade - D8N-R Double angle tilt & C-Frame ...............................$25,000 Brush Rake - D6 - Destec ................................................................$6,000 Brush Rake D7R 144” Adjustable ...................................................$8,500 Brush Rake D8 - 148..........................................................................$8,000 Counterweight - D6T Drawbar Parts .............................................$2,500 Rear Hitch & Counterweight D6T ...................................................$2,900 Ripper - D6N - Ripco MS..................................................................$7,500 Ripper - D7R - Cat Multi-shank .....................................................$20,000 Ripper - D8N-R-T Ripco Multi-shank- No Controls ...................$25,000 Ripper Shank D8R/N .........................................................................$2,750 Winch - D5H - Cat ...........................................................................$12,000

WHEEL LOADER ATTACHMENTS

Blade Snow IT28G, 930G, 420D Hyd Angle *New* ....................$12,000 Blade Snow 930K/938K WBM 12 ft. Fusion Hyd/Ang ................$16,000 Broom - IT28G - BP25 100” Broom *Rebuilt*..............................$10,500 Bucket - IT28G/930G - Cat Q/A 100 in.............................................$4,500 Bucket - 938H Cat Fusion Q/A - 106 in .............................................P.O.R Bucket - 928G Snow/Chip - CWS 8 yd. Roll Out ...........................$8,000 Bucket - 966G - 125” GP……*New* .............................................$7,000 Bucket - 966G - WBM 120” 7-1/2” yard T/A..................................$8,000 Coupler - 980H - Imac Q/C hydraulic..............................................$5,900 Forks - IT28G - IT Q/A 72” ................................................................$4,500 Forks - 930K,938K Cat Fusion - Q/C 54”..........................................$7,000 Forks - 938G - WBM Q/A 46” ...........................................................$4,000 Grapple - 930H - IT Q/A EFI Almost New .......................................$5,000 Grapple Bucket - 950H Pin-on Cat..................................................$6,000 Grapple - 966G Cat Log grapple WBM ..........................................$7,500 Jib - 930G/H, Cat Fusion Lugging ....................................................$4,500 Jib - 938K - Fusion Q/A .....................................................................$4,500 Tire - IT24F/IT14F - 17.5 x R25 40% Michelin (4) ...........................$2,750 Tires - CS56 23.26” Goodyear Diamond Tread (2) ....................... $3,500

CONVEYORS New & used conveyors, from 20’ to 120’, radial or transfer conveyors, quick delivery. TYALTA INDUSTRIES INC. PHONE: 1-800-960-9939

For all your crushing equipment requirements. Sales, service and parts MORMAK EQUIPMENT PHONE: (250) 542-7350 VERNON, B.C.

2010 Metso LT96 Jaw Crusher, New Jaw Plates, 36x24 Jaw Size, Good C o n d i t i o n , 3 , 5 0 0 H r s. $295,000. Langley, BC Advertise your machines in Norstone Excavating. gerrardwhite@gmail.com the classifieds! Call Sheryl PHONE: (604) 866-0482 for deadline and rates. CALL: 1-800-663-4802 Equipment For Sale Online – We have thousands of ENGINE CORES equipment & trucks for sale at SupplyPost.com! Log on C AT & D e t r o i t C o r e Engines & Parts. Calmar, today... AB www.supplypost.com Ranger Mechanical rangergary@hotmail.ca DOZERS PHONE: (780) 985-3095

ENGINES

MOTOR GRADER ATTACHMENTS

Blade Snow 140H/140M Hyd. Lift & Angle WBM ......................$15,000 Lift Grp. Front - 140G/H/M - Cat.......................................................$6,000 Lift Grp. Front - 14H/14M - WBM ....................................................$8,500 Snow Wing -140M/160M - WBM ripper mnt. *New* ...............$12,500 Snow Wing - 140M/160M - WBM Low Pro ...................................$8,500 Snow Wing - 140H/160H - WBM Lo-Pro........................................$4,000 Ripper - 14H - Ripco MS...................................................................$6,500 Wobbly Wheel - M/Grader 13 Wheel Blaimore .........................$14,000

2013 Komplet 60/40. 240 hrs. $119,900. JCB Endeavours Ltd jcbendeavours@gmail.com PHONE: (403) 894-5633

SKIDSTEER ATTACHMENTS

DRILLS-ROCK

Detroit S-50. 11,500 Hrs. G o o d r u n n e r. $ 7 , 0 0 0 . Calmar, AB Ranger Mechanical 2007 Hitachi ZX240LCS3, rangergary@hotmail.ca Excavator with a Coastal PHONE: (780) 985-3095 Drill Package, Cumberland, BC RSD Road Building Ltd rvcvequipment@gmail.com PHONE: (250) 202-8858

CRUSHERS 2014 Elrus/Sandvik CH550, 600 hrs. This cone has recently been rebuilt back to factor y specs. No expense was spared on the rebuild! - All internal components are new. - All pumps and hoses are new. - Electric Motor was purchased new and upgraded to 500HP this year. - ASRI was recently updated. - Backless liner (liner can be changed in five hours). - In feed and out feed conveyors. Work orders are available and this is a one owner cone. Located in Saskatchewan. POR. Vernon, BC Okanagan Quality Control Ltd adamh@okqc.ca PHONE: (250) 803-2930

September 2019

1974 Cat D8H, Needs undercarriage work, Cumberland, BC RSD Road Building Ltd rvcvequipment@gmail.com PHONE: (250) 202-8858

Auger 30C Skidsteer High Torque Unit Drive................................$2,500 Blade - 246C - AMI 108” snow *New*..........................................$4,610 Bucket HD LowPro Skidsteer 72” edge..*New* ..........................$2,025 Bucket RD LowPro Skidsteer 78” tooth..*New* ..........................$1,650 Fork - SS - AMI 48” 4200 LB HD Q/A…...*New* ..........................$1,065 Jib - Skidsteer 2000 lb Cat Lugging ................................................$1,850 Sweeper S570 - Skidsteer sweeper...............................................$2,750

EXCAVATOR ATTACHMENTS

Brush Rake - 200 - 60” CWS Q/A ………*New* .........................$6,000 Brush Rake - 200 - 60” WBM Q/A…..*New*................................$6,000 Brush Rake - 250 - 64” WBM Q/A 324/329 ....................................$6,500 Bucket - 120 - 56” WBM Q/C W/O Twist-a-Wrist DLE ................$7,000 Bucket - 200 - 36” Craig WBM Q/A (ZX210) ..................................$6,000 Bucket - 200 - 60” WBM Q/A ZX200LC ..........................................$6,250 Bucket - 250 - 36” Cat WBM Q/A....................................................$5,000 Bucket - 250 - 42” Cat WBM Q/A (322C)........................................$5,000 Bucket - 250 - 60” WBM Q/A...........................................................$5,500 Bucket - 250 - 66” C/U Finning .......................................................$4,900 Bucket - 250 - 66” EFI WBM Q/A 329E ...........................................$6,000 Bucket - 330 - 48” CWS WBM Q/A.................................................$6,500 Bucket - 330D - 72” WBM Q/A AMI ...............................................$7,000 Bucket - 345/450 - 54” WBM Q/A ...................................................$7,500 Bucket - 450 - 84” WBM Q/A ..........................................................$7,000 Chuck Blade - 250 - WBM 84” WBM Q/A .....................................$6,500 Chuck Blade - 300 - IMAC 84” WBM Q/A .....................................$6,000 Chuck Blade - 450 - WBM 120” WBM Q/A ...................................$6,500 Coupler - 250 Cat Hyd Q/A ..............................................................$3,500 Coupler - 300 Cat Hyd Q/A ..............................................................$3,500 Compactor - 250 - NPK C8B.............................................................$6,000 Ripper - PC78US - 6,307D/308D, ZX75US-3, CWS ........................$1,500 Ripper - 150 - Finning Q/A Lugging .................................................$1,500 Ripper - 250 - WBM Q/A...................................................................$4,500 Thumb - 330 - Cat Hyd ......................................................................$6,500 Heater Propane Sureflame S1500E 150000 BTU ............................. POR Fan 2007 Air Master AH42 .................................................................. POR

2016 25/50 track jaw. 700 hours. Excellent condition. Cat C9 300 hp tier engine. Magnet and extended discharge conveyor. Jaw plates approx. 50%. Located in Langley. $625,000. CAN STEVE: (604) 857-3107

8V71 N/A Power Unit. Good runner. Dbl Dbl oil cooler. $2500. Calmar, AB Ranger Mechanical rangergary@hotmail.ca PHONE: (780) 985-3095

WA N T E D : “ D E A D O R ALIVE” Diesel Engines: C u m m i n s - ( B I G C A M S, 444, 4BT, KTKTA, etc), Cat (3304,3306,3408 etc.) Detroit, etc. 4 cyl. to CAT 3408 Power Unit. DI. 16 cyl. Truck or industrial. Good Runner. 503 HP. Good running assortment of good running engines. $6,500. Calmar, AB POR. Princeton, BC Ranger Mechanical scott@westcoasttruck rangergary@hotmail.ca parts.com PHONE: (780) 985-3095 SCOTTY: (250) 295-0101 Next Advertising Deadline is Sept. 20th, 2019. Call Sheryl for rates. CALL: 1-800-663-4802

BACKHOE & MINI EXCAVATOR INVENTORY

Bucket - 35 Series - Cat 24” EFI Q/A ..............................................$1,850 Bucket - 301 Cat 10 Series - EFI Q/C 12” .......................................$1,650 Bucket - 303 Cat 30 Series - EFI Q/C 18” .......................................$1,650 Bucket - 303.5 - EFI 18” Q/A Cat 2014.............................................$1,850 Bucket - 50 Series - 305 EFI Q/A 24” ..............................................$1,850 Bucket - Bobcat - 20” Digging Q/C....................................................$800 Bucket - 420E,F - 42” Cat Q/C Cleanup ..........................................$1,750 Hammer NPK GH-07 Mini Ex Breaker Inc/chisel tool .................$4,850 Thumb - 35 - Hydraulic thumb…*New* ........................................$1,950

Detroit S-50. 3,500 Hrs. G o o d r u n n e r. $ 7 , 0 0 0 . Calmar, AB Ranger Mechanical rangergary@hotmail.ca PHONE: (780) 985-3095

1991 CAT D4H, New U/C, 30” shoes, ROPS, 6 way 10’ 8” blade. Only 4835 original hours, $49,900. Langley, BC Hik Holdings Ltd. PHONE: (604) 250-1395

ZF TRANSMISSIONS & DIFFERENTIALS

- REBUILDS & REPAIRS Moxy, Terex, Volvo, John Deere, Case - specializing in off-highway applications - quality and cost-effective work - on-site testing and troubleshooting - available 7 days a week

Also offering on-site repairs and servicing of all makes of construction and agriculture equipment.

Dolphin Mechanical Services Ltd. Langley, BC - Call Eric 604-314-8032 dolphinmechanicalservices@telus.net

CAT 379. 610 HP. Completely overhauled. Unused. $15,000. Calmar, AB Ranger Mechanical rangergary@hotmail.ca PHONE: (780) 985-3095

Large inventory of used and rebuilt Detroit Diesel, Cat, Cummins, Perkins, Deutz and Volvo engines. P.G. Truck & Equipment PHONE: 1-800-946-9400 OR (250) 561-1234

Bob’s Diesel Repairs 10718 Seaton Rd., Winfield, BC

Phone: 250-766-3833 Diesel Generator Sets - 30 kW to 150 kW Units

• • • • • • • •

LD Rebuilt CATSO 3406B Engine Perkins 1006 Engine Cat 3304T 75 kW, 12 Lead OLD kW, 12 Lead John DeereS150 Cummins 175kW, 12 Lead Rebuilt Cat S3304 OLD Diesel Engine Rebuilt Cummins 8.3 Engine D 2-John Deere 4045 Engine SOL

Cummins, Cat, Detroit Diesel Repairs


September 2019

Supply Post · Our Readers Are Your Buyers

BROWN INTERNATIONAL SERVICES

EXCAVATORS

NEW 2019 New Holland E17C Mini Excavator, c/w 16” dig bucket, Kubota Tier 4 Final 3-cyl. diesel engine, 3,910lb Operating weight, Long arm, Rubber tracks, ROPS w/ 2-post canopy, Control pattern changer, 2-way aux. joystick, Additional counter weight, Travel alarm, 12’10” Max dig radius, 7’3” Max dig depth. 5 Year Lease at $540/Month (+HST). Other terms available, call for more info. Delta Power Equipment sales@deltapower.ca PHONE: 1-888-903-8772

Page 43

2011 Hitachi ZX75-3 w/ 2014 Hitachi ZX135US-5N DaeQuip clean up bucket, w/ Accurate dig and clean DaeQuip dig bucket, Q/C, 1989 942 Liebherr up buckets, hyd. thumb, hyd. blade, aux. plumbing, Excavator, Deutz Engine hyd. Q/C, and hyd. blade. Isuzu engine. Thumb availwith less than 2000 hours 5237 hrs. $149,900. able at extra cost. 5313 hrs. on the engine. $8,500. PHONE: (250) 468-1000 $69,500. PHONE: (250) 468-1000 Lowbanks, On. Geo. Barnes & Sons Ltd gbs@talkwireless.ca PHONE: (905) 774-6551 Can’t find what you are looking for? Thousands of more machines and equipHitachi ZX200 LC-3 w/ ment for sale on: WBM clean up bucket, www.supplypost.com WBM dig bucket, WBM hyd. thumb, aux. hyd., 3041 hrs. $165,000. PHONE: (250) 468-1000

1998 John Deere 110 Excavator c/w Blade & Thumb, 11,100 hrs. $44,000. Ly l e ’s Bobcat & Excavating Service lylesbobcatexcavating. com Advertise your machines in lylesbobcat@yahoo.ca the classifieds! Call Sheryl PHONE:(604) 302-2232 for deadline and rates. 2016 John Deere 60G, CALL: 1-800-663-4802 only 1640 hours. Machine c/w 42” twist bucket 42” clean up bucket , 24” dig2011 Hitachi ZX135US-3 ging bucket, thumb. Can w/ new 30” dig bucket, new 54” clean up bucket, new Take over my lease I’ve 2012 Hitachi ZX350LC – 3, hydraulic thumb, new Q/C already paid the interest 5950 hrs., excellent condiand hyd. blade. 6532.7 hrs. your gain my lose don’t tion, c/w 2 buckets, Q/A, $135,000. have enough use for it. 2012 Hitachi ZX290 LC-5 Pro-Link thumb. PHONE: (250) 468-1000 w/ 36” Accurate dig bucket, Pausch Equipment Ltd Peace River, AB Green Ridge Enterprises 66” CWS clean up bucket, Kelowna East Central, BC CWS hyd. thumb, Accurate pausch.equip@shaw.ca PHONE: (780) 821-9494 cab guard, aux. plumbing. PHONE: (250) 470-8688 7733 hrs. $147,500. PHONE: (250) 468-1000 John Deere 892DLC, runs really well, c/w 42” dig bkt, 64” cln-up, hyd thumb, Q/C, 3 Rockram Hyd. hammers. Bricor West Contracting Ltd 2007 John Deere 225D Sicamous, BC 2007 Hitachi ZX350LC-3 LC w/new hyd. thumb, oddydrilling@cablelan.net w/ rebuilt CWS thumb, 2007 John Deere 225D 36” WBM dig bucket, 60” PHONE: (250) 836-2418 Q/C, dig and clean up LC w/60” WBM clean up WBM clean up bucket, 2011 Volvo EC 210CL buckets. Excellent U/C. h y d r a u l i c e x c a v a t o r . Cab guard, live heel and bucket, 36” CWS dig buck- W B M q u i c k c h a n g e , et, low hour cat rails, pads 32” triple bars pads, and $68,000. US. auremailliance@hotmail. grapple available. 7887 hrs. and sprockets. 8840 hrs. Isuzu engine. 8390 hrs. $149,000. $98,500. $118,500. com TIM: (509) 951-3156 PHONE: (250) 468-1000 PHONE: (250) 468-1000 PHONE: (250) 468-1000

Sexsmith Used Farm Parts Ltd. Sexsmith, AB | www.usedfarmparts.com E-mail: farmpart@telusplanet.net

DISMANTLING: EXCAVATORS: Komatsu PC228USLC LOADERS: Case 621, JD 644C, JD 544B, IT14B Cat, W14, Case W20, Case W20C, MF 33D, Case W14B, JD 544 CRAWLERS: Komatsu D53A, Case 1150B, JD 450C, Cat D7, Cat D82U FORKLIFTS: IHC 4500, MF 6500 • GRADERS: Champion 720A SKIDSTEERS: Cat 297, Gehl 4625, Melroe Bobcat 943, 863, 853, 843, 610, Case 1845, 420 NH BACKHOES: JD 610T, JD 310D, Case 580B, Case 780, Ford 575E TRENCHERS: Case 860 PACKERS: Bomag BW213 PDH-2 A LARGE SELECTION OF TESTED DIESEL ENGINES CUMMINS, CAT, PERKINS, JD & CASE

1-800-340-1192

Buying Equipment For Dismantling

AMIX GROUP SURPLUS Jim Murphy • 1-844-505-4105

• Bilge Water Pumps, 25 HP, 575v, 24amp, 60hz, 3-Phase .......................................................................... SALE • Bilge Water Pumps, 30 HP, 575v, 28amp, 60hz, 3-Phase .......................................................................... SALE • Sutorbilt Rotary Blower - Model # 1437-5111 .... SALE • Mitsubishi Generators, 600v, 163amp, KVA 168.8 SALE • CAT Powered Leroy Summer Generator, 600v, 3-Phase .......................................................................... SALE • 18v92 Detroit Diesel Engine w/ Blower................. SALE • 18v92 Detroit Diesel Engine w/ Blower w/ Hyd. Pwr. Pk..................................................................................... SALE • Large Rollers, Used to Move Ships-Houses-Large Equipment ..................................................................... SALE • 72” HD Digger Bucket ............................................... SALE • 85” HD Clean-up Bucket........................................... SALE • 530 Doosan Quick Coupler Exchange .................. SALE

To see all our surplus inventory, visit SupplyPost.com

NEW PARTS for IHC - Dresser - In Stock, including Exchange Transmissions, Steering Drives & Drop-In Motors, Carco Gearmatic Winch Products FULL TRACK PRESS FACILITIES Complete Excavator & Crawler Tractor Undercarriages Berco, Trek & Intertractor

MACHINES FOR SALE

· 1989 Case 855D Crawler Loader, c/w ripper .................$7,500 • John Deere 540 Skidder ...............................................$11,000 • IHC H80B, runs well, c/w bucket ..................................$10,000 · D-6 TD15E Grapple.........................................................$4,500 · TD15E Semi-U Blade ......................................................$4,500 • D-7 17A machine, not running .......................................$3,500 · Dresser TD20C, not running, complete ...........................$6,500 · Komatsu D65 double angle tilt blade.............................$2,900 · TD20 E/G double angle tilt blade ...................................$3,500 · Cat D8K Beales brush rake .............................................$6,000 • TD15C Beales brush blade .............................................$4,000 • TD15C Winch, Carco F50 ................................................$3,500 • TD20G-20E Grapple.........................................Reduced $5,000 • TD20E GUTO DVT 800 engine .........................................$9,500 • Dresser TD9H/D39/TD10M, 39 link, rails, c/w 22” pads, new take off, track fit ............................................................$6,000 · Dresser TD20E/G 42 Link Track Groups, c/w 26” SS pads ................................................................................ IN STOCK · Komatsu PC300, New rock guards .................................$2,000 • Cat D7 17A Pup Engine ..................................................$2,500 · 924 Cat, New QA coupler, Weldco Beales ......................$1,500 · New Hitachi EX200, thumb, Wajax .................................$4,500

Wrecking: IHC S8A Skidder, Cat D7 17A, Komatsu D85E-18, good U/C Large Inventory Of New & Used International & Dresser Parts & All Brands of Undercarriage

“We Service What We Sell” Ph: (250) 546-6518 • Fax: (250) 546-3100 www.brownihc.com |E-Mail: info@brownihc.com 4274, Box 557 Hwy 97A North, Armstrong, B.C. V0E 1B0

LNH EQUIPMENT

LOOKING TO BUY USED EQUIPMENT • ALL CONDITIONS • TOP PRICES PAID • CALL TODAY EXCAVATORS / PROCESSORS / LOADERS CAT 308D Excavator, hydraulic thumb, 2 buckets and blade, steel track w/ rubber inserts 3,358 hours 7.5 tonne ........................ P.O.R. John Deere 590D, 15 ton excavator, c/w 2 buckets, quick attach, hyd thumb, meter shows 6,726 hours (may not be correct) runs & works well .................................................................................... $29,500 1984 Cat 950B Wheel Loader, 6,500 hrs, GP bkt, 20.5 rubber $45,000 2014 JD 250G, 5,000 hrs, cab guard, catwalks, thumb Espar, heater, brand new engine w/receipts .................................................. P.O.R. 1991 Case 580K 4x4 Backhoe, turbo diesel, extend-a-hoe, standard front bucket ....................................................................... $25,000 STREET SWEEPER 2008 Lay-Mor 6HC Street Sweeper, 6’ angle broom. Kubota diesel engine. 382 orig hours. Exc.cond.work ready. Delivery available. Asking .................................................................................. $9,500 TRUCKS & TRAILERS 1999 Mack CL 713, hydro Vac truck, c/w PTO vacuum and tank 107,702 kms, fresh CVI & work .............................................. P.O.R. 1981 Peerless Tandem Axle Low bed, 8’6” wide, rear beavertail, manual disc connect front neck, nice condition, fresh CVI & new decking .................................................................................$17,500 1996 Peterbilt 362 Cabover, Cat 34066E, 18 spd, 14K front, 46K rear, 6,000 hours on engine, 260xxx on truck, roll-off truck....$16,500 FINAL DRIVES Link-Belt 240 LX final drives with drive motors ................... P.O.R. Cat 315 Final Drive Complete w/Propel Motor ........................CALL ATTACHMENTS 2003 Waratah 622 Processing Head, can be seen running, no breaks or welds, complete with everything ......................... $15,000 Complete Hyd. Thumb off Volvo 240, includes all parts & brackets ............................................................................................. $4,500 Various Excavator buckets to fit all size machines ................CALL 2014 Hyundai 210-9 Forester burn unit for parts ...................CALL Recently In – 2004 Volvo 240B Forester – Burnt Unit, will sell complete or parts; c/w Q/A, dig bkt & hyd. thmb ......................CALL 2004 Volvo 210B Forester Burnt, complete or parts ...............CALL Volvo A40C complete, for parts ...............................................CALL Hitachi EX200-1 • Cat 330 BL ................................................CALL

TF: (844) 849-4257

www.lnhequipmentltd.com for complete inventory and pictures


Page 44

Supply Post · supplypost.com

FEEDERS

2007 Link-Belt 240 LX, 13,300hrs., c/w hyd. Q/c 36” dig bkt., 66” clean-up bkt., aux. hyd. plumbing, 10hrs. on rebuilt engine. New Rad & hoses, hyd. pump done 10,000hrs. New Berco UC comp. inc. shoes, ver y well maintained since new, smooth operator. $89,000. Langley, BC LLOYD: (604) 328-7981

Hitachi ZX120-1 w/ new dig bucket, new clean up bucket, and new hyd. thumb. Will come with new Q/C. Hour meter reads 1069; 25% is idle time. Actual hrs plugged in from dealer are 7244 hrs. $69,000. PHONE: (250) 468-1000

PRINCE GEORGE

TRUCK & EQUIPMENT

250-561-1234 - www.pgtruck.com

1-800-946-9400 EQUIPMENT

• 2006 Extec E7 Scalp Screener .......................... POR. • 2006 JD 2054 Waratah 622B Processor ........... POR. • 1993 Ford 9030 w/Seppi Forest Mulcher ...$49,900. • 3412 Cat GenSet 906KVA, 600/480 Volt .......... POR. • TD20G & TD20E Dressers, w/winch & ripper....POR. • 2000 Timberjack 4x4 20K lb Forklift ...........$16,000. • Onan 18kW GenSet, 1 or 3 ph., w/trailer .....$7,500. • Model 5000-21 Superlift Str. Boom Crane ......$4,950. • 2012 Alkota National Pressure Washer........$4,950.

TRUCKS & TRAILERS • 2015 W/S Tri-Drive Tractor ............................... POR. • 2005 F/L Tri-Drive Winch Tractor ...................... POR. • 1998 Peerless Super B Logging Trailer ................. POR. • 1999 Superior Super B Logging Trailer ................. POR. • 1995 Doepker Tridem Clam Dump ....................... POR. • Tridem Hayracks ................................................... POR. • Assorted Water Tanks and Trailers Available....... POR. • 2013 Volvo D13 Auto Shift................................ POR. • 2007 F/L Tractor ............................................... POR. • 2008 F/L S60, 18 Spd, 46 Rear ............................. POR. • 2006 IHC 4400 Tandem 26’ Collins Van w/rail gate .POR. • 1990 IHC DT466 Flat Deck ................................ $6,500. • 2009 Durastar S/A w/ Reefer Van .........................POR. • 1999 FL80 Tandem 24' Deck, Moffat Fork Lift ......POR. • 1986 IHC Tandem Water Truck ...................... $17,900. • 1994 W/S Service Truck w/Fassi Crane ............... POR. • 1995 Tremcar Potable Water Tanker, Tridem .. POR. • 2014 BWS Ez-2-Load Hiboy 53' Tridem ............ POR. • 2012 IHC Prostar Autoshift Tractor .................. POR. • 1991 GMC Topkick Serv Fuel Truck, crane.$12,900. • 2005 48’ Great Dane Tandem, Dry Van ............ POR. • 2005 Westec Vac Tank ..................................... POR. • 1990 ParPac Tri-Axle ........................................ POR. • 1990 KW T800, Cummins, 5th Wheel .........$10,500. • 1981 Ford, 20’ box, p/tailgate, Allison trans. ... POR. • S/A & Tandem Axle Jeeps................................. POR. • 1998 Kenworth Tandem Dump Truck .............. POR. • 2005 Cancade Tridem End Dump ..................... POR.

WRECKING • 793 JD Buncher • 2200 Madill • 748G Skidder • G67 Grapple • TD20E • Timberjack 450A & 520 Grapple Skidder • Hitachi EX200-5 • 230 & 404 Timberjack Line Skidder • Clark 668B Line Skidder • Clark 125B Loader • John Deere 693D • Treefarmer C7 & C8 Line Skidders • 82-40 Terex • TS24 • Warner & Swasey Grad-All 300 Hydro Cruiser • Good selection of Detroit Diesel, Allison, Clark, Twin Disc, Cat, Cummins and Perkins engine and trans. parts.

September 2019

LUMBER

HAMMERS

2017 Hyundai HL940TM tool master loader, 931 20 yard surge bin, In & Out hrs, 3rd spool w elec/hyd 36” conveyors, Ready to joystick, scale, ride conwork!. $35,000. OBO trol, 3 yd bucket, hydraulic Hammers to fit your carrier! quick change, air susp w HUGH: (604) 657-7167 Own or Rent. heated seat, rear camera, vanedequipment.com remote GPS, fuel warmer, FORKLIFTS PHONE: (604) 888-9020 $144,900. PHONE: (877) 255-9293 kevin@smartcastequip ment.com PHONE: (604) 670-1471 LOADERS (Log) 2013 370 Hitachi w/power clam, 11,000hrs, 2000 hrs 2004 JLG G10-55A 7800 on U/C rebuild. $325,000. hrs., Work ready, c/w forks, 2019 325D Cat, single bucket & man basket ( grosser pads, power clam, engineered). Recent hyd 5000 hrs. $395,000. PHONE: (250) 256-0236 pump & ECM. 1995 Hitachi EX300-3, Pausch Equipment Ltd burnt, parting out; 1999 Kelowna East Central, BC Hitachi 330-5, burnt, partpausch.equip@shaw.ca ing out. 2000 Hitachi 370, PHONE: (250) 470-8688 burnt, parting out. PHONE: (604) 240-7977

GENERATORS

JD 690E LC, can be heard r unning, 2 Linde final drives, motor & sprockets, cylinders & swing bearings. Also 200 SAE Lincoln welders. PHONE: (250) 674-8387

2004 Hitachi 270 LC RB ......................$65,000

INVENTORY:

2012 Cat 568 Loader, w/New Engine, 9,200 hrs ................................... $7,500/month 1992 Kenworth Tandem Dump Truck ..$54,000 Timberjack 404 Line Skidder ................ $8,500 Cat D7F ....................................................SOLD Finning M4 3306 PR123...................... $19,500 Cat 988B ...........................................$55,000 2009 Tigercat 870C Buncher ..................POR 1974 D7F ..........................................$29,500 Rayco 84” Compactor ........................$9,500 Ford 8000 Hiab...................................$9,500 Western Star with Lowbed ...............$30,000 Cat 330 RB with Grapple ..................$70,000 Clark 667 Grapple/Line Skidder.......... $29,500 Madill 075 Track Loader ............................POR 1980 Cat 980C .....................................$37,500

*FINANCING AVAILABLE* WWW.ROYQUIP.COM

250-203-0134 FOR MORE INFO

MARINE Ex Albion ferr y Ramp 94'X14', Load Certified 100 ton 5 axles. PHONE: (604) 530-2657

MISC.

Century 17’ Aluminium car carrier deck, sliding tilt. 2005 Volvo L220E, 7 yd, $3,500 OBO. Winlaw, BC 27,000 hrs, good W/O’s. PHONE: (250) 226-7990 $78,000. CALGARY: (403) 291-1010 Maxon Hyd. Tail gate, like new. $900 OBO. Winlaw, LOGGING EQUIP. BC . 1985 JD 580B crawler trac- PHONE: (250) 226-7990

tor, angle blade & winch. LOADERS (Wheel) $ 2 2 , 0 0 0 . U S, 2 0 1 0 J D 4045T JOHN DEERE 748H 4X4 grapple skidGENSET. 60 KW 3 Phase. Cat 980F. Asking $69,000 der, $65,000. US. 2002 OBO. 2004 Cat 980G. JD 648G Series lll grapple $4,500. Calmar, AB Asking $129,000 OBO. skidder. $42,000. US. Ranger Mechanical Langley, BC. auremailliance@hotmail. rangergary@hotmail.ca dave@infinitywest.ca com TIM: (509) 951-3156 PHONE: (780) 985-3095 PHONE: (604) 240-7977

MONTHLY SPECIAL:

3” & 4” Lowbed decking up to 24’ long. 2x8 truck decking 12’ to 24’ long. Treated timbers & plywoods. Swamp pad timbers, 8x8 10x10 - 12x12 - to 30’ long. Bridge timbers cut to size. Poles for pile driving, any size. Metal roofing and wall cladding. We deliver “even to the moon’. can-ambuildingsupply@ shaw.ca CAN-AM LUMBER MILL PHONE: (604) 580-1415

PARTS 1971 Ford Louisville – For Parts Only c/w 1160 Cat motor, 5and 4 transmissions, 44,000 rear ends. $3,000. Hope BC PHONE: (604) 206-1144 OR (604) 869-1617

WYATT’S USED EQUIPMENT SALES & PARTS 1978 Cat D9H Dozer, UBlade & Ripper.................$75,000 1991 Cat D8N Dozer, UBlade & Ripper.................$97,000 1978 Cat D8K Dozer, Twin Tilt Angle Blade ..........$47,500 1979 Cat D8K Dozer, UBlade & Ripper .................$42,500 1970 Cat D8H Dozer, Angle Blade & Ripper .........$27,000 1987 Cat D4H TSK, 6-Way Blade, Winch, New U/C........... .............................................................................$62,500 1990 Cat 235C Excavator, Dig Bucket & thumb ...$20,000 2016 Cat 325D LL, WBM power clam, 5,000 hrs ..$395,000 1996 Timberjack 608 Processor ..........................$28,500 1981 Cat 16G Grader, 16’ MB, Ripper & wing ......$45,000 1998 Champion 750 Grader, 11,211 hrs, c/w 2 Sets of Chains and Snow Wing ........................................$54,500 1981 Cat 631D Scraper ........................................$45,000 1980 Cat 966C Loader, 3rd Valve & Bucket..........$35,500 1997 Cat 527 TSK Skidder, 6-Way Blade, Swing Boom & Grapple ..............................................................$160,000 2014 John Deere 848H Grapple Skidder, 7,000 Hrs, Chains & Dual Function Grapple ........................$185,000 Cat D5H Winch c/w Controls & Pump..................$13,500 Cat D7R Winch.....................................................$10,000 Cat D6C LGP Straight Blade ...................................$4,250 Limmit 2300B Stroke Delimber w/Mount & Comp ..... $2,750 Tree Tow Dresser TD20E Grapple ...........................$5,000 Weldco Beales Bush Blade, fits to Dresser TD20 ...$3,750 Weldco Beales Log Grapple, fits 966D, E or F ........$4,500 Cat 966 D, E, F, Hydraulic Quick Attach ..................$2,750 NEW Accurate Komatsu PC308 Exc. Thumb ..........$7,000 WBM Cat 973C Side Dump Bkt, Like New..............$7,500 Cat D11 U/C, 6 Sprocket Segment, Idler & Roller $10,500 (2) Cat 966C 1800 X 25 Rim, 16 Bolt............... $375 each Cat D6T Draw Bar, with Counterweights ................$3,000 NEW Komatsu Idler, fits PC 400-6 or HD300-6 ......$1,950 (8) New OEM Cat HD Bkt. Teeth, c/w 1 Tooth Adapter, Fits 988 or 990 ............................................................$2,000 Parting Out 1975 Cat 14G Grader.......................Call Parting Out Cat D5H TSK ................................Call

Call 250-706-8594


September 2019

Supply Post · Our Readers Are Your Buyers

PROCESSORS

Wally’s tires

TRAILERS

Quality New Tires & Chains

PORTABLE SAWMILLS INDUSTRIAL SAWMILLS BLADES & BLADE MAINTENANCE. PHONE: (877) 866-0667 2016 Link-Belt 210X2PHN P r o c e s s o r, C / W 2 0 1 5 Waratah HTH622B, comp. measuring, steel feed rolls, butt saw, A/C, forestry cab, forestry pkg., high walker, 6,850lbs. $299,000. earthfirst@telus.net GORD: (250) 255-8037

SAND & GRAVEL Quality, built in BC to your specs, Screen Decks 3’ x 5’ to 5’ x 10’, Conveyors, Feeders, Placer. Kelowna, BC. Juniper Equipment Ltd. PHONE: (250) 470-8987

SAWMILLS Small log line mill consists of end dogging scragg, chop saw, dbl hd notcher, stacker, all Pendu equip. For more info and pictures go to - www.sawmilltrader. com. Also available - Head Rig, Re-Saw, Wood Splitter PHONE: (250) 446-3450

Tag/Tilt Equipment Trailer $14,000. Ly l e ’s Bobcat & Excavating Service lylesbobcatexcavating. SCREENERS com lylesbobcat@yahoo.ca 2 0 0 3 Wa b a s h 5 3 ’ t r i PHONE:(604) 302-2232 dem. rings on floor for tie downs, extra light on top rear, air ride. $22,000. Sn: 1JJV532W23L824649. Whitehorse, YK 1 9 9 3 A s p e n L o w b o y Homer Enterprises, c / w , 1 9 9 8 P e e r l e s s ggholm@gmail.com 2 0 1 8 M c C l o s key R 7 0 J P 3 0 - 8 0 A a n d 2 0 0 1 PHONE: (867) 668-1985 Scalping Screener, 9x4 Gerr y’s Steer Booster. 20’ insulated moving box S c r e e n B ox , 2 - D e c k , (SOLD TOGETHER) Sn: with 4’ kick out ramp, box 2A9LB5036PS037100, Tier 3 Engine, Like New heater included. $7,000. 2PLH02620WBJ88890, C o n d i t i o n , 3 0 0 h r s . 2 A 9 T D 1 0 1 6 1 N 1 2 5 2 5 0 . Nanaimo, BC. admin@schaffersequip$185,000. Langley, BC $60,000. Whitehorse, YK ment.com Homer Enterprises, Norstone Excavating. PHONE: (250) 753-7232 gerrardwhite@gmail.com ggholm@gmail.com PHONE: (867) 668-1985 TRENCHERS PHONE: (604) 866-0482

SKIDDERS 2014 848 JD, 7500 hrs. $185,000. PHONE: (250) 256-0236

1980 Willock Lowboy c/w 1981 Booster. Air ride, booster designed for cat SURPLUS blade. Sn: 80WRL031, 80WVL045. $20,000. Galvanized 1x7 Strand Whitehorse, YK ½” + 3/8” Surplus Pricing. Homer Enterprises, ggholm@gmail.com ED: (403) 899-2363 PHONE: (867) 668-1985

WWW.ALBERTAENGINE.COM 64166-426 Ave E Aldersyde, AB T0L 0A0 ENGINE PARTS ENGINES • CALL MARK 403-519-7254 CAT • 3126 .......................................................$2,500 - $4,900 • C7 ...........................................................$4,900 - $6,500 • C7 RB LB .............................................................. $9,500 • C15 MXS .............................................................. $9,500 CUMMINS • ISL CM554 ........................................................... $5,500 • 4B3.9 .................................................................... $5,000 DETROIT • 4-71 RB ................................................................ $5,000 • 6V92TA DDEC .................................................... $10,900 IHC • DT 466E................................................................ $3,200

1-800-361-7333

Ph: 403-720-3494 mark@albertaengine.com

DEERE CONSTRUCTION Parts & Components

One of the largest inventories of used, rebuilt, and new surplus Deere parts and components in North America. We also stock parts for Hitachi, Timberjack, Caterpillar, Ditch Witch and can locate those hard to find parts that we may not have in stock.

BRANDT VALUE PARTS

1-877-685-4886

Page 45

2007 Ditch Witch 1820HE, Trencher, STK #0U000754, 400 Hours, Milton, ON. $14,000 CDN, $10,600 USD PHONE: (888) 2-BRANDT

MERLIN’S BUY & SELL Bucket 950 ...............................................................$2,500 Bucket 966C ............................................................$2,500 Bucket 966G/H - New ...........................................$6,500 Bucket-200 - V Bucket - CWS .............................$3,000 Chip Bucket- 12’ wide............................................... Call Bucket & coupler Cat 920 - As New ...................... Call 920 Boom complete with levers.............................. Call Grapple 966F ...........................................................$3,500 Grapple 966C ...........................................................$1,500 Quick Coupler 930G/924 New ..............................$3,500 D7 - Ripper Shank - “Cat” .....................................$1,000 Quick Coupler 966F ................................................$3,500 Differential 966F Rebuilt .....................................$17,500 Differential 966G Rebuilt .....................................$18,500 D7H/R Used “Cat” Rollers - Excellent ................... Call D8N/R Used “Cat” Rollers - Excellent ................... Call Cylinders- 950, 966 .................................................... Call Tire Chains - 17.5 x 25 studded................................$750 Engine Core 3306 Di -330B ....................................$3,500 Tires New 20.5 x 25 “Set Of 4” ............................$3,500 Tires New 23.5 x 25 “Set Of 4” ............................$5,750 Tire & Rim To Fit 966 D/E, 26.5 x 25 ......................$1,000 Tire & Rim To Fit 966F 26.5 x 25 .............................$1,000 Rims - 966C - 23.5 x 25 ..............................................$500

LOTS OF NEW & USED PARTS FOR OLDER CATERPILLAR EQUIPMENT ~ WRECKING 966C~

MERLIN GISE 250-819-4444 merlin.gise@shaw.ca

Phone: (250) 833-8349

Evenings (250) 835-4678

Located in Sorrento, BC

MARCHER SKIDDER TIRES & CHAINS • Economically Priced Tires & chains • Fast Shipping • Mounting Available (Locally) • Trade-Ins Welcome

*INTRODUCTORY PRICING* SKIDDER TIRES

• 24.5 x 32 - 20 ply......................................................... $2,500 • 30.5 x 32 - 26 ply ........................................................ $3,200 • 35.5 x 32 - 26 ply......................................................... $4,400

SKIDDER CHAINS • 30.5 x 32 - 3/4” link - Diamond Style .......................... $4,000 • 35.5 x 32 - 3/4” link - Diamond Style ........................... $4,400

Wally’s Private Parts Quality Used Parts

Phone: (250) 833-8349

Evenings (250) 835-4678

Located in Sorrento, BC

PARTS MACHINES Skidders John Deere 640D-Just came in • John Deere 848H Skidder • John Deere 648D Grapple Skidder • Burnt 648 GIIIJD Skidder• John Deere 648GII Burnt • John Deere 748GII • International S7 Skidder • S10 International Skidder • 748GII Skidder • 2005 Cat 545 Skidder • 545 Cat skidder, 748GIII, 748GII, 848 JD Skidders • 525 Cat Skidder • 630 Tigercat Grapple Skidder • 518 Cat Skidder• S8, S9 International Skidder • 380, 404, 450, 480, 550, 660 TJ Skidders

Excavators 240BLC Volvo Excavator • 220 Hitachi LC • 230 JD LC • 690E w/ Denarco - 3000Stroker • 210 Volvo w/ 2000 Limmit • 240 Volvo Excavator• 210 Volvo Excavator Burnt • Case 1085 Rubber Tire Excavator • Cat 325L Excavator with 2200 Limmit Stroker • 160 Kobelco Excavator 2004 Burnt • 200 LC Hitachi • 2005 330 LinkBelt Excavator • 325 Cat Excavator• Link-Belt 2800 Quantum 3000 Dewarco • 210 300 Komatsu • 210, 200 Hyundai W/ Harricana Stroker • 330, 320, 325, 322, 225, 235 Cat • Hitachi 270 • Hitachi EX200LC • 220 Komatsu

Loaders Log: JD 2054 Log Loader, • 330 Cat Log Loader with Thunderbird Log Loader • 644A Jd Loader Wheel: • 125 Clarke Wheel Loader • Terex 8231 Loader

Bunchers Just came in: 860 & 870 Tigercat Bunchers • Madill 2200 Buncher • TJ 625 Buncher • Madill 2800 w/ 360 Head • 630A Prentice Tilter Buncher • 850 TJ Buncher • 950 TJ Buncher • Timberjack 950 Buncher • Madill 2200 Buncher Burnt • 2007 753 JD Buncher(Burnt) • 748GIII Burnt• 618 Buncher • 2628, 608, 618, 628 TJ Bunchers • 630 Prentice Buncher

Crawler Tractors • D8H Cat, D7F Cat, Komatsu D65D

Graders • 686 & 740 Champion Grader • Austin Western Champion D600-760 Tractors • 630B Tigercat

Trucks • 1995 Freightliner, Series 60 Detroit, 470 Hp, 40,000 Lb 410 Ratio Rockwell Axles, Dbl Lockers

Other parts machines • 320 Waratah Head • Coring Hotsaw 20-22 Head • OMEGA 20-20 Ton Hyd. Crane • Crane Ph 20-1A Omega • Denharco 3000-3500 Strokers

Used Tires and Chains • 35.5 x 32, 30.5 x 32, 24.5 x 32, 23.1 x 26 • 18.4 x 34, 26 x 28 • 18.00 x 25 • 14.00 x 24, 16.00 x 24, 20.5 x 25

Tracks • 618, 628, D6, D7, 200

Running Motors • 8.3 5.9 Cummins; 671, 353, 453, 471, 6V53 • Detroit Diesel; 466, 414, 4276, • 4045 John Deere

Visit www.SkidderBuncherParts.com MASTERCARD For More Info & Photos! VISA &ACCEPTED


Page 46

Supply Post · supplypost.com

TRUE NORTH EQUIPMENT INC.

1-780-722-8129 · www.truenorthequipment.ca 2005 Deere 850J Dozer, 6-Way Blade, Ripper, Cab w/ Brush Guards, 50% U/C, 8,000 Machine hrs., 2,000 hrs. on New Engine .........................................................................$103,500 Weldco 250 Series 40” Excavating Bucket, 5 Teeth, Kat Lugging ...........................................................................$4,500 Weldco 250 Series Ripper, Kat Lugging ........................$3,395 Weldco 200 Series Power Clam Grapple, Missing Clam Cylinders, Valve..............................................................$12,000 2016 Tigercat 870C Feller Buncher, 7,400 Hrs .......$395,000 1997 Unimog U2150, Fluid Tank w/Pump, Extra Set of Tires & Rims..............................................................................$50,000 Hultdins SG520S Grapple, c/w GVS173 Rotator ..........$7,920 2006 Komatsu 200LC-7, Waratah 622B Processor, Forestry Cab, Guarding, High Walker ..........................................$35,000 2012 Hyundai 210LC-9, Waratah 622B Processor, Forestry Cab, Guarding, High Walker, 19,500 Hours ..................$95,000 2012 Hyundai 250/Southstar 585 Processor, 6750 hrs ....................................................................................$220,000 2000 Prentice 620, Quadco 5600 head, newer engine & undercarriage ...............................................................$93,500 2018 TimberPro 725D/Southstar 500 Processor, NEW..POR 2009 TimberPro 830B Combo, Clambunk, Shortwood Bunks, Hultdins Grapple, Tracks, 9,200 hrs............................$250,000 2017 Waratah 623C Harvesting Head, Computer Controls, 5,000 Hours ...............................................................$150,000 2011 Hyundai 250LC-9 Excavator, Q/C, 2 Buckets, Hyd. Thumb, 2,300 Hrs.......................................................$135,000 2012 Hyundai 210LC-9/LogMax 7000XT, 12,500 hrs. ...........................................................................$124,500 NEW AMI Quick Coupler, c/w Blank Hooks For Hyundai HL730 ....................................................................$1,500

COASTAL PACIFIC EQUIPMENT

coastalpacificeq@gmail.com | www.cpecanada.com

1-800-811-6911 • (250) 392-7755

MISCELLANEOUS · · · · · · · · · · · ·

TD9, TD10, TD12, TD15C, TD15E, TD25C-E rippers TD12C, TD15C-E, TD20E-G-M, TD25C-E clearing rakes TD20E-G-M, TD25E-G Semi U blades TD25C-E-G Full U Blades CAT D7G Blade & C-Frame Dresser 530 GP bucket Gearmatic 22 winch, Hyster W6 winch (fits D65E) TD15C-E, TD20E-G winches Timberjack JD853 used track group Cummins 5.9 (CPL 938) 28L x 26 LS-2 tires New & Used parts for IH-Dresser-Dressta- JD648EKomatsu D65E · Wrecking Dresser 520 wheel loader, Samsung 210LC Excavator · JD748G3 Grapple Assy and Tigercat 630D Grapple Assy

2 - 1994 Inter national Tractor for Par ts, C-15 Cat 60 Series Detroit, 15 Speed Transmission, $12,000. Lowbanks, On. Geo. Barnes & Sons Ltd gbs@talkwireless.ca PHONE: (905) 774-6551

1 8 6 0 0 l i t r e A l u m i nu m 4 Equipment For Sale Online T C - 4 0 6 T a n k e r Compartments. $60,000. – We have thousands of equipment & trucks for sale Nanaimo, BC. at SupplyPost.com! Log on admin@schaffersequip ment.com today... PHONE: (250) 753-7232 www.supplypost.com

1994 Inter national, 60 Series Detroit Engine, 15 Speed Transmission, 50 Tonne Universal Roll Off. $18,000. Lowbanks, On. Geo. Barnes & Sons Ltd gbs@talkwireless.ca PHONE: (905) 774-6551

685 South Mackenzie Avenue, Williams Lake, B.C. V2G 1E2

2008 Dressta TD9M w/6 way, Encl. Cab, 3,208 hrs ................................................................ Huge Savings! CALL 2010 Dressta TD 10M Six Way, Encl. D Cab, Winch, SOL 1,747 Hrs ................................................ Huge Savings! CALL 1990 TD15E - Angle or Semi-U blade ............................. CALL 2013 Dressta TD 15M, WT 1,378 hours 6-way blade ripper or winch ............................................................................... CALL 1987 Dresser TD20G with angle blade & ripper ............. CALL 2009 Dressta TD20M ...................................................... CALL 1981 Dresser TD25E with A/Blade, Ripper .................$40,000 1996 Dresser TD25G A-Blade, Cab, Ripper New U/C .$90,000 1969 Cat 966C Loader w/Grapple, New Tires, Clean ..$29,000 1993 JD540E Line Skidder, 3,217 original hours .......... CALL 2015 Case SV300-2 Skidsteer, 2,535 hrs ... Huge Savings! CALL

4006 Atlas Hyd. Tr uck Crane, c/w Hyd. Stabilizers and Extensions. $5,000. Hope BC PHONE: (604) 206-1144 OR (604) 869-1617

TRUCKS We have a few trucks in n o n - wo r k i n g c o n d i t i o n to be salvaged for parts. 2012 International - 2 units, 2013 International, 2011 Volvo, 2007 Peterbilt, 1998 Capacity Shunt Truck - 2 units, Ottawa Shunt Truck, Capacity Shunt trucks -6 units, 1999 Ottawa Shunt Tr uck - 3 units, 2004 K a l m a r, 1 9 9 7 O t t aw a Shunt Truck Come with your crew, dismantle the trucks and take it away. Please contact Suraj at suraj@euroasiainc.com to schedule a visit. Euro Asia Transload Inc. Richmond, BC. PHONE: (604) 240-3089

September 2019

2009 International 4400 Tandem Flat Deck, China Top. 272439 km. New Rad, Air-Air & Fan Hub. Manual Transmission. $28,000. Nanaimo, BC. admin@schaffersequip ment.com PHONE: (250) 753-7232

2015 Freightliner 122SD, Cummins ISX, 550 HP, RTLO-20918B trans, 20,000 Front Axle, 46,000 Rears Axle with Lockers, 4.56, Brand new Armstrong Box. 2001 Mack Mixer Truck, Approx Tare: 11,810 Kg. 10.5 yard London Mixer, P.O.R. KS455. Kelowna, BC. 66,900 Km. and 7,070 Premium Truck & Trailer Inc. hours, Current CVI, ready CODY: (250) 869-9448 for work, $27,500 OBO. Advertise your machines in HUGH: (604) 657-7167 the classifieds! Call Sheryl Equipment For Sale Online for deadline and rates. – We have thousands of CALL: 1-800-663-4802 equipment & trucks for sale TRUCKS (Hwy) at SupplyPost.com! Log on today... www.supplypost.com

TRUCKS (Dump)

1990 Ford L-9000 $12,000. Ly l e ’s Bobcat & Excavating Service lylesbobcatexcavating. com lylesbobcat@yahoo.ca PHONE:(604) 302-2232

2001 KW N14/525, 15spd. 40rears/390. 240wb. Cert to Jan 2021. Runs well $16,000. Fort St James, BC Jadeite Devices Inc. jtr.thatsme@gmail.com TEXT: (778) 667-0611

FOR SALE Pictures Available 1980 MADILL 071 YARDER ON RUBBER, 6V92TA Four Axle Carrier, 4 Guy Lines, New Paint Work Ready. Comes With Maki 11 Carriage ...........................................................$150,000. WAGNER, L 4130C LOG LOADER, Near New Tires In Very Good Condition. .............................................................$150,000. WAGNER, L 90 LOG LOADER, Good Runner ......$45.000. OBO 2012 HITACHI ZX 350 EXC., 5,500 hrs.........................$230,000.

1988 Freightliner, Cummins Engine, 8 Speed Transmission, 50 Tonne Universal Roll Off. $13,000. Lowbanks, On. Geo. Barnes & Sons Ltd gbs@talkwireless.ca PHONE: (905) 774-6551

2007 Peterbilt 357, 8 M3 McNeilus boost-a-load drums., Cat C12 engines. F i ve t o c h o o s e f r o m . Approximately 16,000 hrs. Current CVI, work ready. HUGH: (604) 657-7167

FOR SALE

GRANITE ROCK QUARRY AND SAND & GRAVEL • • • •

100 plus acres! Granite Rock. Gravel Quarry Pit. All equipment included in price. PRICE REDUCED TO $1.5m

Highway #4, Parksville - Qualicum area on Vancouver Island, BC. Call for more information:

Cell: (250) 756-8532 Phone: (250) 758-7652

2007 J.D. 350D EXC. 7,400 Hours, Cab Guard, Thumb, U/C At 90%, Two Buckets .........................................................$145,000. 2006 J.D. 240D, LC, Ex. 6,350 Hrs, FOPS, Thumb, Long Stick. In Good Working Cond. ..................................................... $POR. 1996 CAT 330 L EXC.,10,500 hrs, fops, thumb ..............$57,000. 1995 HITACHI EX 300 H, 10,000 hrs, 75% U/C ..............$57,000. MORBARK 1000 TUB GRINDER, Working Cond. ........$87,500. 6 - FLOATATION TIRES & RIMS FOR CAT 730A size 30/65R25, 15 - 20% rubber................................................................$10,500. 1 - NEW ROCK TRUCK TIRE 26.5 x R25, L-3, AL37 ........$2,650. MADILL 099 YARDER, Working Condition .................$175,000. D10 N/R/T TRACK RAILS, 1 Set At 80% .......................$20,000. D10 RIPPER SHANK ..........................................................$2,250. PORT A POWER RAMS 50 T - 125 T .....................FROM $750. HEEL and CYL. For Madill 3800C ......................................P.O.R. JRB HYD. PIPE GRAPPLE With Quick Change 72 Inch X 106 Inch, As New .....................................................................$4,500. VOLVO L 150 E HYD. PIPE FORKS With Q/C Sliding Forks, 64 Inch X 106 Inch As New ...................................................$4,500.

NEW KOBRA HYDRAULIC DRYWALL FORKS............$1,350.

~HOPE MECHANICAL SERVICES~ Phone, Text or Email · easyhope@yahoo.com

Glen at 604-795-6827, Ray at 604-860-3000 HEAVY DUTY MOBILE MECHANICAL SERVICES

Contact Reed at 604-869-6222


September 2019

Supply Post · Our Readers Are Your Buyers

Looking for heavy equipment or truck par ts? SupplyPost.com has over 36,000+ new, used, and reconditioned PARTS listed for sale, with new parts 2007 9900i INT, C15 550 being added every day! 18 speed 391 gears 4 Search by make or part wheel lock 46rears on hen- number. Start here: drickson air ride and wethttps://www.supplypost. line. CALL FOR $$ com/parts JEFF: (519) 580-6480

2005 CAT 730, Clean Well Maintained Truck, Just Thru Shop, Recent Ser vice, Charge Struts With Nitrogen Replaced Walking Beam Bushing, Front Drag Link Bushing, TRUCKS (Off Hwy) Rear Control Arm Bushing Rear Box Hinge Pins, All Box Cylinder Bear ings S e r v i c e D i f fe r e n t i a l & Planetaries 12,691 Hrs, Tires (26.5r25) Fronts 70 % Tr, Rears 40 To 50 % Tr Truck Is Dry And Clean, 2007 Cat 735, 26.5X25 All Hydraulic Cylinders Are Tires, Heated Bed, 13,110 Dry. $119,500. Edmonton, Hrs, $66,900. AB. PHONE: (250) 493-8819 AFTER HRS: (250) 490-6795 KS Inc. AFTER HRS: (250) 490-7976 PHONE: (780) 990-9604 2005 T800 KW, C15 550 18spd 410 gears 14.6frt, Super 40rears on 8bag air ride and wetline. CALL FOR $$ JEFF: (519) 580-6480

Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

2014 Volvo A40G, 6,600 Hrs., ROPS Cab w/AC, 29.5R25 Tires (New tires to be installed), Secondary steering, Brake cooling sys, Auto drive modes, 1 0 0 % D i f f l o ck , Au t o torque lock-up, Box heater, Tailgate, Auto grease, Rear camera, Work lights, $375,000. Marcel Equipment sales@marcelequipment. com PHONE: 1-800-265-5747 Selling equipment or trucks? Submit your ad s e c u r e ly o n l i n e n ow : https://www.supplypost. com/advertise/classifieds. Many pr int and digital options available. Let’s get it sold!!! PHONE: 1-800-663-4802

TRUCKS (Service)

All New 2020 Int’l/Chevy CV515 Mechanics Service Tr u c k , I n - S t o c k a n d Available Now! Haul MORE than EVER with 3,000lbs More Payload. 11’ Steel Service Body with 5,000lb Elec./Hyd. Auto-crane, M i l l e r E n Pa k We l d e r / Generator/Compressor/ B o o s t e r C o m b o, To o l Drawers in (4) Cabinets, LED Lighting and More, Call for more info and Pricing. Work Truck West sales@worktruckwest.com PHONE: (604) 855-5101

WANTED WANTED backhoes, dozers, many excavators, mining equipment, trommels, screen decks, skidders, loggers, Cats with winches etc. auremailliance@hotmail. com TIM: (509) 951-3156

Page 47

Superior Appoints Belterra As Distributor In Quebec Superior Industries, Inc., a U.S. based manufacturer and global supplier of bulk material processing and handling systems, announces a new partnership with Canada’s largest distributor of conveyor belting, components and other bulk material handling solutions. Belterra, a 50-yearold distributor with 19 locations throughout the country, will stock, sell and service Superior’s conveyor idlers, pulleys, scrapers and accessories in Quebec. “We’re excited to partner with such a respected distributor who is wellknown for carrying significant inventory, performing prompt service and having high character,” says Ryan Loge, Superior’s conveyor components sales manager in Canada. With Quebec branches in Montreal, Québec City and Saguenay, Belterra is well-positioned to take care of customer requests

quickly. The distributor will stock a standard collection of Superior idlers, pulleys, belt scrapers and other conveyor accessories. Additionally, the Quebec-based team will work closely with product and project managers at Superior to supply dry bulk producers with custom solutions backed by industry best manufacturing lead times. Belterra has proven itself to be a valuable partner, advisor and product expert to industries across Canada for more than four decades. The company’s dedication to timely results, quality products, extensive selection and flexible service helps reduce costly downtime while improving your efficiency and output. b Source: Superior Industries

CEDAR RAPIDS LINER PROMOTION

MVP280 CONE CRUSHER

4200-300-22 MANTLE ......................................................................$2,230 4200-300-24 LINER COARSE .............................................................$2,915 4200-300-25 LINER MEDIUM ........................................................... $2,825

MVP380 CONE CRUSHER

4800-300-24 MANTLE ........................................................................$2,659 4800-300-67 LINER COARSE .............................................................. $3,335

MVP450 CONE CRUSHER

5400-300-20 MANTLE ..................................................................... $3,165 5400-300-15 LINER COARSE ............................................................ $4,110

30 X 42 JAW CRUSHER

3042-051-01 STATIONARY JAW HD ..................................................... $5,375 3042-051-02 MOVEABLE JAW HD ....................................................... $5,350

Chieftain Equipment

Sales & Rental Professionals Trusted Parts Experts Service & Maintenance Specialists

F/T HD Mechanic Required

Email resume to: ken@chieftainequipment.com

Alberta/ Northern Territories

1-833-601-6787 chieftainequipment.com


Page 48

Supply Post · supplypost.com

September 2019

GREAT NEW & USED INVENTORY! SALES & RENTALS • SCREENERS • CONVEYORS • CRUSHERS • AGGREGATE EQUIPMENT

1-800-960-9939 | 403-946-4860 | Fax: 403-946-5191

AGGREGATE EQUIPMENT CLEARANCE!

McCLOSKEY 514 R TROMMEL

42 X 42 POWERSCREEN IMPACTOR, CAT diesel power, this unit is ready to go to work!

2006 CEC 45” DIESEL TRACK CONE, 5,800 engine hours, in excellent working condition

CONVEYORS IN STOCK! Electric and Diesel. Call for any size!

2007 McCLOSKEY S130 TRIPLE DECK TRACK

2010 MCCLOSKEY C50 — Call for pricing

In House Financing now available! Flexible terms and conditions. Call Tyalta Finance today at 1-877-550-0016, finance@tyalta.com

www.tyalta.com | info@tyalta.com


FAMILY OWNED, SINCE 1971

Ed Murray: 250-812-2925 Garry Shelton: 250-715-5088 Emily Polack: 250-480-8281 Ted Peterson: 604-240-6181 Rob Nessel: 250-710-3626 Rob Popp: 250-668-4756 Craig Willett: 250-287-6169

SECTION 3

WWW.SUPPLYPOST.COM SEPTEMBER 2019 · PAGE 49

Victoria: 1-888-652-9139 Duncan: 1-866-746-1515 Langford: 1-250-915-0350 Nanaimo: 1-250-756-0026 Burnside (Parts): 1-250-384-0451 Campbell River: 1-250-286-1151

NOW SIX LOCATIONS TO SERVE YOU!

ST I ON C K

!

ST 1 O IN C K !

NEW TRUCKS IN STOCK – READY TO WORK! 2019 FREIGHTLINER 122SD, with 70” Raised Roof Sleeper, Detroit DD16 600 Hp with Eaton 18 Speed Manual, 13,300FA, 46,000RA. 1 in stock. CALL TODAY FOR PRICING!

2019 WESTERN STAR 4900 SF Tractor, 40" Sleeper, Detroit DD16 600 Hp 1850 torque with Eaton 18 speed manual transmission. 12,000FA Super 40 RA. GREAT B-TRAIN SPEC.

2020 WESTERN STAR 4900 DUMP TRUCKS DD16 600 Hp & Cummins X15 605hp avail. Eaton 18 Spd, 20,000FA 46,000RA. Inventory incl. Nahanni Tub Body, Nahanni Light Steel body & Summit Brandon boxes. CALL TODAY FOR PRICING!

2020 WESTERN STAR 4700, rigged with Can American Soil King Extreme, Detroit DD13 470HP, 1650 Ft/Lb with Eaton 18 Speed Manual Transmission, 20,000# FA, 46,000# RA. IN STOCK AND READY TO GO TO WORK!

WELL PRICED USED TRUCKS IN STOCK!

WAS $135,000

NOW $128,500 2016 WESTERN STAR 4900 TRIDRIVE, Detroit DD16, 600 Hp 1850 lb/ft, Eaton 18 Speed Manual Trans., Well Maintained Truck, 240,000 Km With Extended Engine Warranty To 09/08/2020. IN STOCK AND READY FOR WORK!

WAS $69,900

WAS $95,900

NOW $62,500 2006 STERLING W/REAR MOUNT HIAB CRANE, MBE 4000450 HP, Eaton 18 Sp Trans, 20,000FA w/46,000RA. Hiab 144: Lift Cap. Wt 2,650 lb @ Max Reach 33’10. Max Lift Cap. 4410 lb @ Reach Of 20’8, 276,300 mi. READY TO GO TO WORK!

NEW ARRIVAL

NOW $91,999 2012 MACK GU813 GRANITE DUMP TRUCK, MP8 505 Hp with Eaton 18 Speed Trans., 19,800FA, 44,000RA, Rigged w/ Nahanni 16 Gravel Box & Pony Wet Kit, 397,638 Km. PASSED INSPECTION AND READY TO GO TO WORK!

NEW ARRIVAL

$179,900

COMING SOON

$39,500

2016 WESTERN STAR SELF-LOADER, 4900 WS, Detroit DD16 600HP, Eaton 18 spd, 20,000FA, 69,000RA, rigged w/2004 Serco 160 log loader and sliding log bunk, 185,700 kms. PASSED INSPECTION & READY FOR WORK.

COMING SOON! 2014 LOAD KINGS, 32’ X 28’ Decks, Alum. Wheels, 22.5 Tires at 50% or better, Air ride Suspension, 2 Curb Side Large tarp boxes, Well Maintained, will come with a fresh CVI. CALL TODAY FOR PRICE & AVAILABILITY.

2013 HINO 258 WITH 26.6’ VAN BODY, Hino J08E-BC 220HP Engine w/Allison auto. 10,000FA, 19,000RA, rigged with Collins 25/5’ van body with rollup rear door. NICE CLEAN TRUCKS, READY TO GO TO WORK. 330,000km.

www.prtruckcentre.com

TRAILERS


Page 50

Supply Post · supplypost.com

September 2019

1-855-998-0716 SALES • RENTALS • PARTS • SERVICE & REPAIRS • FINANCE & LEASING

2020 STOUGHTON 53’ TRIDEM INSULATED DRY VAN w/ HEATER UNIT 53’ Long, 102” Wide, 13’6” Overall Height. HK-450 MAX Thermo King Unit Installed, Holland A/R Slider Susp., Laminated Oak Flooring 1 3/8” Thick, 12” Steel Tread Threshold Plate, White Painted Alum. Front Wall & Composite Side Wall Panels, 18 Gauge 4 3/4” Sidewall Scuff, Swing Doors w/ 1-Rod Lock per Door, Flush Rear Sill, Standard Polyurethane Dock Bumpers. Stk# 12707

$70,995

2020 Lazer Inox Stainless Steel Tridem TC407, 44,000L Capacity, 2 Compartments, Heated Belly, Mounted Cabinet Comes Fully Rigged w/ T&E Pump, Titan Gauges & Load Hose, Stk# 10728 ........ $224,995

2020 Stoughton Insulated Dry Van, Tridem, 53’x 102”, 13’6” Overall Height, 47” 5th Wheel Height, Steel Wheels, 11R22.5, Air Ride Slider, Swing Doors, Drum Brakes, Newly Designed Rear Impact Guard has 4 Rugged Vertical Bolt-On Supports. Stk# 12715 .... $57,995

2020 Doepker Tridem Logger w/Steering Axle, Alumi. Wheels, 4” Stakes, QT400 6-9’6” Wide Bunks, Wide Axles, 11R24.5 BF Goodrich Cross Control, Tire Chain Hangars, HT300 Susp., Tare Weight 21,365 lbs, Stk# 12599..................................................$111,995

2020 Doepker Drop Deck w/ 5’ Beaver Tail & Ramps, 53’ Length, Tridem, Alum. Wheels, 255 70R22.5 BF Goodrich ST230 Load Ranger H Tires, Intraxx A/R Susp., Stk# 12623 .......................$62,995

2018 Doepker Crossgate Dump, 38’ Length, Alum./ Steel Wheels, 576 11R24.5 BF Goodrich ST Load Ranger H Tires, Air Ride Susp., GVWR 43,100 kgs, Gate opening 17”x93”/Hopper Stk# 12678............$72,995

2020 Polar Alum. Pneumatic Super B, 1,880 Cu. Ft. Total Capacity, 1 Comp., 2 Hopper Lead; 1 Comp., 2 Hopper Pup, Operating Pressure of 15 PSI at 125°F, 20” Alum. Cover Manhole w/ Six Hold Downs, Too Many More Features to List! Stk #12647 ...... $229,995

2019 Advance Super B TC407, Alum. Barrel, 2 comp., Titan gauges w/ 2 readouts, 63,600L cap., Alum. wheels., 11R24.5 Tires, (2) 20” Manholes, Full Tunnel, Catwalk & More! Stk# 12788 ....... $309,995

2020 Stellar King B Logger, 6 Axle, 60” Axle Spread, Alum. Wheels, 11R24.5 Tires, Air Ride Susp., Tandem & Tri-Drive Main Gooseneck, Too Many Features to List! Stk# 12850.............................................. $155,995

2020 Doepker Super B Flat Deck, 60’ Length, 5 Axles, Aluminum Wheels, 11R22.5 Tires, Intraxx A/R Susp., GVWR: Lead 77,200lbs, Rear 77,200lbs, Stk# 12998................................................ $94,995

RENT FROM US! Our rental fleet has over two hundred units in service. We offer daily, weekly, and monthly rental purchase options available.

FOR FULL INVENTORY VISIT

WWW.EDMONTONTRAILER.COM


September 2019

Supply Post · Our Readers Are Your Buyers

Page 51

True grit and determination are just a few ways to describe the Sasse family. It’s not every day members of the same family graduate from the same commercial driving license program – let alone four. But Cassandra Sasse and three of her kids (Kendall, Katelynn and Kodi) turned to the trucking industry as a way to support their family. “We’re no strangers to heavy duty trucks since my husband holds a Class A CDL, so my kids and I started looking at the trucking industry for opportunities,” said Cassandra Sasse. “I have seven kids, and four of them still need supervision. It was important for me to find a career that would give me the flexibility I need to watch over my young kids.” After relocating to Elko, Nevada, the Sasse

family discovered that Elko’s thriving commercial transportation industry offered the financial and time flexibility the family sought. On top of that, Cassandra, Kendall, Katelynn and Kodi each applied for and received full scholarships to attend Great Basin College’s sixweek CDL program, making the decision to enter the trucking industry even more enticing. They became the first students to receive scholarships for the Great Basin College CDL program. In January, Cassandra, Kendall and Katelynn Sasse enrolled in the Great Basin College CDL program and graduated with their Class A CDL in March. Kodi Sasse waited to enter the same program in May, so that she would be 21 years old and eligible to drive out-of-state

following her graduation in June. While the Sasse family was in the middle of transitioning into a new way of life in Elko, the Great Basin College CDL program was also going through changes. During the time that members of the Sasse family were enrolled in the CDL program, Great Basin College added a new Kenworth T680 in February. After first learning how to operate Great Basin College’s previous Class 8 truck in January, Cassandra, Katelynn and Kendall Sasse, were the first students to drive the Kenworth T680. The differences between the T680 and the previous truck they were driving were night and day. “There’s no doubt the Kenworth T680 is a better driving truck,” said Cassandra Sasse. “The

KENWORTH

Four Family Members Graduate From Same CDL Program

Left to right: Kodi Sasse, Kendall Sasse, Kenneth Pope (Great Basin College CDL program instructor), Katelynn Sasse and Cassandra Sasse.

T680 is much easier to shift, and the suspension makes for a very comfortable ride. It was a unique opportunity for us to be the first ones to drive the new T680. It’s good to have driving experience on multiple truck makes, that way we’re more prepared for our careers. But I see why Ken (Kenneth Pope, Great Basin College CDL program instructor) likes Kenworth trucks so

much. The drivability is hard to beat.” Pope, who has more than 22 years of driving and teaching experience, was a big advocator for the program’s administration to add the Kenworth T680. “In my time on the road, a Kenworth truck was my favorite truck to drive,” said Pope. “Kenworth sets the bar high for the trucks they produce. When the opportunity came about

to add a new truck, I told the administration to give Kenworth a hard look. The T680 is a reliable truck that will provide me many years of teaching the next generation of drivers how to operate a Class 8 truck on the best equipment available.” Great Basin’s Kenworth T680 features a 76-inch high-roof sleeper and 500 hp engine. A 13-speed Continued on page 52

Details: Two-way side dump, 34’ elliptical length, heavy duty greaseless hinges, steel chassis with 16” kingpin, 77” axle track and poly fenders. An 8” hoist system with industry leading automatic equalizer system. Aluminum wheels, heavy duty bolt-on push block with underrun bumper and a full tarp system.

ID#14638

MIDLAND TW3000 TRI-AXLE SIDE DUMP MEMBER OF:

1806 2 Street, Nisku, AB, Canada T9E 0W8 brandt.ca camex.com 1-844-388-2770

RENTAL PURCHASE OPTIONS, FINANCING, AND TRADES AVAILABLE


Page 52

Supply Post · supplypost.com

Women In Trucking Association Names 2019 Top Woman-Owned Businesses Redefining the Road magazine, the official magazine of the Women In Trucking Association (WIT), announced today the recipients of the 2019 “Top Woman-Owned Businesses in Transportation.” The list was created to recognize women in leadership and encourage more women to become proactive leaders in their organizations – and even start their own businesses, WIT president and CEO Ellen Voie explained. The program supports WIT’s overall mission: To encourage the employment of women in the trucking industry, promote their accomplishments, and minimize the obstacles they face. Entrepreneurship is a viable means of economic self-sufficiency, and many women are choosing an enterprise connected to transportation to be part of their career aspirations, according to Brian Everett, publisher of Redefining the Road magazine. Criteria used to identify qualified applicants include

(Kari Rihm, President & CEO) • Veriha Trucking, Inc. (Karen Smerchek, President) • Rush Trucking Corp. (Andra Rush, CEO) • Aria Logistics (Arelis Gutierrez, CEO) • Lodgewood Enterprises (Arlene Gagne, President) • S-2international, LLC (Jennifer Mead, CEO) • International Express Trucking (Karen Duff, President & CEO) • Brenny Transportation, Inc. (Joyce Brenny, CEO & Founder) • Knichel Logistics (Kristy Knichel, CEO) • Garner Trucking (Sherri Garner Brumbaugh, CEO) • LYNC Logistics (Cindy Lee, President) • Ontario Truck Training Academy (Yvette Lagrois, President) • AGT Global Logistics (Angela Eliacostas, Owner & Founder) • Powersource Transportation (Barb Bakos, President) • LaunchIt Public Relations (Susan Fall, President), b

majority ownership by a woman, financial stability and growth, innovation, and entrepreneurial spirit. Each company was nominated and chosen based upon business success and accomplishments – including those related to gender diversity. The list is comprised of companies from a diverse range of business sectors in the commercial freight transportation marketplace, including motor carriers, third-party logistics companies, and original equipment manufacturers. Here are a few companies named to the 2019 “Top Woman-Owned Businesses” list and the primary female business owners. For the full list, see supplypost.com. • Bennett International Group (Marcia G. Taylor, CEO) • Kenco Logistics (Jane Kennedy Greene, Chairwoman) • London Auto Truck Center (Donna Childers, Vice President) Source: Women in • Rihm Family Companies Trucking

September 2019

Continued from page 51

manual transmission was spec’d so that students would not be limited to operating automated transmission trucks once they graduated. “We want to ensure that our students have had plenty of practice operating a manual transmission before beginning their careers,” said Pope. “In Elko, our elevation is at more than 5,000 feet and we have mountain passes all around us. I teach my students how to navigate steep slopes, acting as if they are hauling a full payload. It doesn’t matter what the weather conditions are – learning how to drive in tough conditions makes you that much more prepared for professional driving. You can imagine the beating the transmission is taking from students who are just learning. The reliability of a Kenworth truck was a big reason we added the T680. We expect it to hold up for us, and it has. We haven’t encountered any issues.” The CDL program Great Basin College offers consists of no more than four students at a time. The small class size allows

for students to get lots of hands-on driving experience. For long-distance training, Pope will take students out on a 500 to 600mile route, switching drivers every 125 miles. “We customized the 76inch sleeper with three airride seats so that we could have all students onboard during our over-the-road training,” said Pope. “A lot of skills can be learned from watching other drivers and the sleeper provides our students a comfortable place for them to sit, especially on those long trips.” Since 1990, 500 students have graduated from the Great Basin College driving school program, and 92 percent of the students who graduate find a job in the industry. With sufficient funding, Great Basin College’s CDL program will hold seven courses this year. Pope expects the Kenworth T680 will accumulate more than 30,000 miles in its first year as the program’s primary truck of use. “I expect to get a lot of great years out of the Kenworth T680,” said Pope. “We feel fortunate to be able to offer our students a

new truck for them to learn in and develop the skills they need once they graduate from the program.” Since graduating from Great Basin CDL program, Cassandra, Katelynn and Kendall Sasse are driving professionally, hauling heavy equipment locally for mining companies in the Elko area. While the family describes themselves as the “Diesel Family,” Cassandra and her kids originally had no plans of becoming truck drivers, but they have quickly embraced the trucking industry. “We’re excited about the opportunities we have in the industry,” said Cassandra Sasse. “Our ultimate goal is to own and operate our own trucks and eventually drive long haul. We’ve driven a few truck makes now, but nothing drives quite like a Kenworth T680. Once we’re ready to look at buying trucks, we’ll definitely give Kenworth a look.” For more information on the Great Basin College CDL program, call (775) 753-2202 or go to www. campusce.net/gbcnv. b Source: Kenworth

WWW.TRUCKPROVICTORIA.COM

Ingersoll Rand SP60 Roller/Packer Unit ........ ..$9,500 PM35528SP Crane Series 35.5 SP - EN 12999, Max. lifting moment 212,430ft/ lbs (29.4 t/m), Max Capacity at Max. Reach: 1985lbs. @ 68’ 11” (Kg 900 @ 21.00 mt), Continuous slewing. SPECIAL PRICE TO CLEAR OLD STOCK

$59,500 + Taxes.

FD45 Diesel 4.5-Ton, 10,000lbs. CT Power Counter Balance, 1104D Diesel Engine, Auto Trans., Mast Lift Height (w/back rest) 5,766mm………$38,600

ALSO AVAILABLE FLPG35 Dual Fuel 3.5-Ton ............... $26,500 FB30 Electric 3-Ton .......................... $23,000 FB25 Electric 2.5-Ton ....................... $20,000 Z120R-A13 2015 Barrel Clamp...........$6,000

2008 Ford F550 65 SPD, 120 CA 14’ Deck and Lift Gate, Serial #1FDAF56P85EA15937, 383,364 km..........................................$8,600 PM16525S Crane Series 16.5S - EN 12999, Max. lifting moment 108,540ft/ lbs (15 t/m), Max. Capacity at Max. Reach: 1635lbs. @ 47”5’ (Kg 740 @ 14,45 mt), Knuckle-Boom Crane w/ Double Links, Boom Pk. w/ 15° Negative Angle. SPECIAL PRICE TO CLEAR OLD STOCK

$39,500 + Taxes.

TRUCKPRO - PM INDUSTRIES - TRACTION

MARK SALMON

Office: 250-656-1689 Fax: 250-656-1305

1-855-656-1689 | Cell: 250-889-1529

1785 Mills Road, North Saanich, BC

Sales Manager

sales@pmindustries.ca


September 2019

Supply Post · Our Readers Are Your Buyers

Page 53

Providing an added margin of expertise for complex vocational truck sales, Navistar’s Severe Service team recently launched an Application Engineering Hotline that provides International dealers with direct, rapid access to the product experts who designed the vehicles. “Because of the highly customized and often complex configurations our severe service customers require, our dealers’ support for those customers can be enhanced through direct access to Navistar application engineers,” said Mark Stasell, vice president, Vocational Truck, Navistar. “The Application Engineering Hotline supports dealers’ strong relationships with customers by giving them the ability to get direct, expert advice when they need it.” Rolled out to dealers through visits from the Severe Service team, as well

as the dealer network’s online portal, the hotline can be reached through a simple phone call from any International dealer. Phone calls are immediately directed to an application engineer who listens to the dealer’s request and offers support moving forward. During an initial pilot phase conducted earlier this year, the hotline quickly amassed well over 100 calls from dealers. Typical phone calls ranged from general questions on severe service truck configurations to advanced, applicationspecific questions from customers. Some dealers also reached out simply seeking an update on their orders or special quotations. No matter how big or small the issue, each phone call was received and answered quickly and accurately in order to provide dealers with full support.

“There are many times in a given day when a dealer sales person needs an update or has a specific customer question that they need to get answered rapidly,” said Melissa Gauger, chief product specialist, Severe Service, Navistar. “How quickly and accurately it gets answered could have a big impact on that customer’s decision to purchase an International truck. By having our application engineers available to help through this easily accessed, simple-to-use hotline, we’re putting our dealers’ sales teams in the best possible position to win.” Since the launch of the hotline, dealer feedback and customer results have been continuously measured to determine the speed and success of responses. So far, the results have been extremely encouraging, with steady

NAVISTAR

Navistar Launches Application Engineering Hotline

Navistar’s Severe Service team recently launched an Application Engineering Hotline that provides International dealers with direct, rapid access to the product experts who designed the vehicles.

increases in the number of dealers using the hotline and the number of calls received each day. Maudlin International Truck and Trailer, based in Orlando, Florida, was one of the first International dealers exposed to the hotline, and has since utilized it for sales growth. “The Application Engineering Hotline is a game changer for dealer sales productivity,” said Steve Jenkins, sales direc-

tor, Maudlin International Truck and Trailer. “All truck sales are perishable, so getting the right answers back to the customer as fast as possible helps us win more deals and grow our share.” In fact, this new tool has been so successful that the Severe Service team is looking at expanding the hotline to support Navistar’s other products. “Since launching the hotline, we have received

such positive feedback that other product teams across the company want to use the same process for their segments,” Gauger continued. “It’s great to see that type of receptivity to the hotline, and we’re looking forward to continuing to provide this support for our Severe Service products, while helping different product teams across Navistar launch their own.” b Source: Navistar

BUILT IN CANADA MADE FOR CANADIANS UNMATCHED EXCELLENCE SINCE 1944

  

EXPERIENCE AND KNOWLEDGE OF FORESTRY & HEAVY HAUL YOU CAN DEPEND ON ! IN STOCK TRAILERS - CALL FOR DETAILS FULL LINE OF PARTS AVAILABLE

TOLL FREE: 866-657-2662

CHECK OUT OUR NEW WEBSITE!

www.peerless.ca | info@peerless.ca


Page 54

Supply Post · supplypost.com

September 2019

Daimler Trucks North America LLC (DTNA) announced today that it has built the first two Class 8 battery electric Freightliner eCascadias for customers at its research and development center in Portland. The trucks are part of Freightliner’s Electric Innovation Fleet and built to test the integration of battery electric trucks in to large-scale fleet operations. “This milestone in electric is important as both today and tomorrow’s technology is progressing. Our purpose is resolute – we build for our customers,” said Roger Nielsen, presi-

dent and CEO of DTNA. “Our team is incredibly proud to be leading the way for the industry, but prouder still to be working with our customers in a process of co-creation to make real electric trucks for real work in the real world.” The eCascadia is built on the proven foundation of the Freightliner Cascadia, the best-selling Class 8 heavy-duty truck on the market. The initial customer shipments are the first heavy-duty additions to the 30-vehicle Freightliner Innovation Fleet. Real-world use of the Innovation Fleet and continuing feedback

INNOVATION

from the members of the Freightliner Electric Vehicle Council will inform the final production versions of both the eCascadia and the medium-duty Freightliner eM2 in a process of co-creation. Co-creation is the central tenet of DTNA’s approach to electrifying the future of commercial vehicles and a key enabler to the widespread adoption of battery electric trucks. The Electric Vehicle Council brings together 38 Freightliner customers to identify and address all potential hurdles to large-scale deployment of commercial battery electric vehicles. Issues at the forefront of the discussion include charging infrastructure, partnerships with other parties in the e-mobility value chain, vehicle specifications and vehicle use case. Penske Truck Leasing of Reading, Pennsylvania and NFI of Camden, New Jersey are both members of the Freightliner Electric Vehicle Council and will be the first companies to employ the revolutionary eCascadia in their commercial operations. The eCascadias are destined for the Southern California op-

DAIMLER

First Freightliner eCascadia Battery Electric Trucks Headed To Customers

The initial customer shipments are the first heavy-duty additions to the 30-vehicle Freightliner Innovation Fleet.

erations of both companies and will arrive later this month. Additional deliveries of the Freightliner Electric Innovation Fleet will continue throughout 2019. The Freightliner Innovation Fleet is supported by a partnership between DTNA and the South Coast Air Quality Management District (South Coast AQMD) which focuses on improving air quality in the South Coast Basin and partially funded the Innovation Fleet with a nearly $16M grant. The first of the medium-duty electric Freightliner eM2s began

service earlier this year with Penske Truck Leasing and are operated within the South Coast AQMD. “This is an exciting time for the future of zero-emissions trucks, said Wayne Nastri, South Coast AQMD’s Executive Officer. “As we work towards meeting air quality standards, it is imperative that truck manufacturers accelerate the commercialization of these technologies that will help clean our air and protect public health.” e-Mobility at Daimler Trucks The Freightliner eCas-

cadia is a Class 8 tractor designed for local and regional distribution and drayage. Both the eCascadia and the medium-duty eM2 are currently planned to enter series production in late 2021. The Freightliner eCascadia and eM2 are part of Daimler Trucks’ global electrified truck initiative, joining the company’s Thomas Built Buses all-electric SafT-Liner C2 Jouley school bus, the FUSO eCanter, and the Mercedes-Benz eActros and eCitaro. b Source: Daimler

OFFERING A FULL LINE OF TRAILERS TO SUIT YOUR NEEDS!

not imitation

Prince George

www.prolenc.com

877.563.8899

Let K-Line quote your next trailer! Call us Toll Free: 1-888-880-5544 #klinetrailers

|

www.klinetrailers.com


September 2019

Supply Post · Our Readers Are Your Buyers

Page 55

1-855-646-6993

“YourTransportTrailer Superstore!” IN STOCK IN STOCK Quad and Tri Axle Live-Bottoms -1276667

IN STOCK

Triaxle Aluminum Pony Pups HOPPERS IN -1276669 STOCK

DUMPS & WALKING 5 Axle BMAC Trains 28/32 Full Galvanized -1262768

BERG’S TANDEM/TRIDEM & TRAINS AVAILABLE

IN STOCK

IN STOCK

with Air Ramps

& 5 Axle Live Bottoms In Stock

2

IN STOCK

AVAILABLE

READY TO GO 2017 Wilson Combo

FLOORS IN STOCK · TANDEM/ TRIDEM & QUAD AVAILABLE

IN STOCK Quad Axle 53’ Dry Vans 53’ -1276668 Equipment Trailer -1276669 45’ Dump TrailersTandem/Tridem/Quad

Tandem and Tridem Drops

Full Galvanized Flats & Drops and Flats-83558 All Axle Configurations

53’ RAS,17.5 tires, 2 boxes, dunnage carrier, alum. out steel in wheels, strobes, wide load lights, sliding winches, 2 load levellers. -1276659

4 and 5 axle Full Galvanized Flatbeds-1262768

2013 Mac

53’ Tridem drop, 60” spreads, 22.5 tires, all alum. wheels, wide load lights, sliding winches, ramp kit.

IN STOCK

-1276661

2013 48’ MaxMiser Flats

Front slide 10’1” open 60” closed, 22.5 tires, all alum. wheels, 12” crossmembers, coil package, sliding winches. -1276664

2013 Reitnouer 48' DropMiser

Front slide, 10’1” open 60” closed, all

IN alum. wheels, wide load lights, strobes, 22.5 tires, 12” crossmembers. STOCK-1276666 All Axle Configurations - Drops & Flats

VISIT TRANSEASTTRAILERS.COM New Hyundai Reefers Tandem & Tridem Tandem & Tridem In Stock

Dry Vans

View All Our New & Used Inventory at TRANSEASTTRAILERS.COM

VISIT OUR BOOTH SM-728 SEPT. 10-12


Supply Post · supplypost.com

Hayes: King Of The West Coast

September 2019

CONTRIBUTED

Page 56

FRONT PAGE STORY: Vancouver-built Hayes heavy haulers were the king of the Canadian West Coast trucks. By Alyn Edwards

ALYN EDWARDS

The Hayes Manufacturing factory on West 2nd Avenue built this 1933 water wagon for the City of Vancouver.

The 1920’s sign uncovered during building demolition reads: “Hayes Anderson Motor Trucks – a British Columbia product – satisfactory service assures lasting satisfaction”.

Many of their trucks found use in the booming forest industry. Hayes trucks stood out because they were well designed, well built and they were very attractive. Abbotsford long-distance trucker Arnie De Jong has been driving his 1965 Hayes Clipper 100 for well over 50 years. It gets a lot of attention on the highway and at truck shows. The first time Arnie climbed in this Hayes highway truck was in February 1966. The truck had been bought new by Del Barton and Arnie became his Top: A Hayes highway truck sales brochure from the late 1960’s. Bottom: driver – hauling shakes to Hayes trucks were known for their toughness and durability. California and fresh produce on the return trip to Vancouver. From an early Hayes sales brochure, “Back in the day, Hayes showing the many uses for the trucks trucks were a little more built in Vancouver. expensive. My truck was a custom. They had never built a truck like this before. It was so fancy that it even had chrome frames around the windows, a chrome steering column and two air ride seats,” he says. “The Americans ogled the truck because they didn’t have anything that looked like the Hayes.“ The radiator insignia was a giant ‘H’, the hood ornament was a grizzly bear and the interior had bear images sewn into the upholstery. “I used to call that truck the Queen of Vancouver’s line haul rigs,” says former Hayes driver and salesman John Wihksen who is currently writing the history of the company. “That was the nicest looking truck in British Columbia.” Arnie bought the truck in August 1970 for $32,000 with 520,000 miles on the odometer. “I was able to drive it for eighteen months before I had to do anything to it,” he recalls. Hayes trucks saw service in B.C.’s booming forest industry Continued on page 57 from the 1920’s until the mid 1970’s. CONTRIBUTED

Hayes employees started Pacific Trucks in direct competition to Hayes. But many of the Pacific heavy haulers were exported for use as far away as South Africa and Indonesia. Although Kenworth had a plant in Burnaby and Freightliner and Western Star trucks were turned out in Vancouver-area plants, Hayes and Pacific were the only locally-owned and operated truck manufacturers on Canada’s West Coast.

JOHN GREGG COLLECTION

was a hub for heavy truck manufacturing. Partners W.E. Hayes and Douglas Anderson opened their Hayes-Anderson truck manufacturing plant in 1920. By the late 1930’s, the company had rebranded as Hayes Truck Manufacturing and was turning out about 100 highway and off-road trucks every year. The trucks earned a reputation for sturdiness and reliability. In 1947, three former

CITY OF VANCOUVER ARCHIVES/STUART THOMPSON

ghost sign appeared on the side of an old building at 295 West 2nd Avenue in Vancouver when the building beside it was being demolished for urban renewal: Hayes Anderson Motor Trucks – a British Columbia product – Satisfactory service assures lasting satisfaction. The sign had originally been hand painted on the False Creek industrial area building in the 1930’s. At one time, Vancouver

CONTRIBUTED

A


September 2019

Supply Post · Our Readers Are Your Buyers

Page 57

ALYN EDWARDS

The 1965 Hayes Clipper highway truck owned by Arnie De Jong displayed at a Reno truck show.

CONTRIBUTED

ALYN EDWARDS

Grizzly bear motif was prominent in Hayes trucks as in this upholstery reproduced by Vancouver’s Quality Trimmers that originally upholstered all Hayes trucks.

drove professionally was a Hayes. He now drives a gravel truck. He has spent $40,000 and hundreds of hours restoring his truck over the past decade. He’s particularly proud of the interior which was done by the same person who upholstered the truck when it was new. “Quality Trimmers in Vancouver did all the Hayes and Pacific trucks. The lady who upholstered the truck in 1969 stitched in all the bears,” he says referring to the bear insignias that were a Hayes trademark. “I restored the truck as a tribute to all past and present drivers and the loggers from all over who loved Canadian trucks or helped build them,” he says. “It’s a passion of mine and it’s really important to keep our history going.” The passion for Hayes trucks is echoed by fellow owner Arnie De Jong: “It means a lot to me. My whole life history has been spent in that truck. I have never seen a more fancy Hayes truck than mine. For the day and the year, it was very special.” In 1975, Hayes was sold to a subsidiary of Pacific Car & Foundry of Seattle, manufacturer of Kenworth and Peterbilt trucks. One

ALYN EDWARDS

“That was really important when you’re just starting out and need to save some money.” His truck traveled one million miles before he had to change the engine. When trucking was deregulated and rates plunged, Arnie started hauling loads to and from the Eastern U.S. with his Hayes highway truck – largely into Ohio and New York. The truck has been all over the continent traveling nearly two million miles in the more than half century Arnie De Jong has been behind the wheel. “It really stood up well. There’s not many Hayes trucks around anymore,” he says. Now it’s a favourite at shows and he often sets up beside a 1970 Hayes HD owned by fellow Fraser Valley resident Bernd Dessau. Originally sold new in Kamloops, this truck hauled logs in B.C.’s interior until it was left parked under a tarp in Williams Lake for nine years. “I made a deal with the owner that I wouldn’t work the truck and that I would restore it, Bernd says. “I bought it because of its B.C. heritage. It’s very Canadian, hand built and very unique,” Bernd says. The first truck he

1970 Hayes HD former B.C. logging truck owned and restored by Bernd Dessau, of Rosedale, BC. Below: Hayes Manufacturing Co. Ltd. Vancouver, B.C. data plate on the 1970 Hayes HD logging truck. year later, the new owner closed the Hayes company permanently. It was the end of the line for Hayes trucks after 56 years in business and for Canadian trucks being built on the west coast. b Alyn Edwards is a partner in Peak Communicators, a Vancouver-based public relations company. aedwards @peakco.com.

ALYN EDWARDS

Continued from page 56

The cab of Arnie De Jong’s 1965 Hayes highway truck is all business.


Page 58

Supply Post · supplypost.com

CTA Calls Supply Chain To Action On Labour Code Changes The Canadian Trucking Alliance called on the supply chain to join the trucking industry in pressing for exemptions to three new Labour Code provisions that take effect September 1, 2019. The provisions, as they currently stand, would disrupt the entire Canadian goods movement and logistics economy, says CTA.

ESDC initiated scheduled hearings this summer with management and labour stakeholders in various industries to discuss the possibility of exemptions. CTA met with officials on Aug. 1 and requested exemptions to the following new provisions: The requirement to provide employees (in writing) a copy of their full sched-

ule at least 96 hours in advance of the start of the work week; The requirement to provide at minimum 24 hours written notice of any shift changes; The right to refuse overtime for certain personal responsibilities. (This last provision may prove to be less of a concern once ESDC further clarifies their definition of ‘certain personal responsibilities’. “Under these provisions, it will be difficult for an employer to make any changes to an employee’s ‘schedule’

– including truck drivers – with less than 96 hours’ notice and impossible to make any changes with less than 24 hours written notice,” says CTA president Stephen Laskowski. “This change will have a significant negative impact on the entire Canadian economy as the modern supply chain continuously relies on the flexibility of the trucking industry to be able to adjust to daily changes in production or their customers’ demands.” CTA met a deadline of June 2019 to submit con-

#5-1340 Stevens Road, West Kelowna, BC V1Z 1G2 Cody Fortin 250-869-9448

1015 Great Street, Prince George, BC, V2N 2K8

STK# KS455

STK# KS459

2015 FREIGHTLINER 122SD, Cummins ISX, 550 HP, RTLO20918B trans, 20,000 Front Axle, 46,000 Rears Axle with Lockers, 4.56, Brand new Armstrong Box. Approx Tare : 11,810Kg. P.O.R.

2011 FREIGHTLINER CASCADIA, Detroit DD15, 455 Hp, 13 Spd Trans, 13,300 Fronts, 40,000 Rears, 3.73 Ratio, Clean Truck Ready To Work. P.O.R.

STK# KS448

2015 FREIGHTLINER 122SD 13.2 Front/40 Rears, 244 Wheelbase, Ultra Shift Transmission, Clean Truck, Ready To Go To Work! P.O.R.

STK# 30127A

2006 FREIGHTLINER COLUMBIA 120, Detroit Series 60  515 Hp 18 Speed  12,000 Front, 40,000 Rear  3.90 Ratio Kms: 1,628,700. P.O.R.

NEW FUSO FE160, Gas, 15,995 lb GVWR, New Collins 16' Box, V8 6.0L Gas Engine, Allison 1000 Transmission. P.O.R.

STK# 30123T

2020 DOEPKER DSL30, 11R22.5 Aluminum wheels/ Black Rims, 4 Tool Boxes. P.O.R.

STK# KS464

STK# 30065A

2018 MITSUBISHI FUSO FE-180 with Knapheide Landscaper Body, c/w Scissor Hoist, Tow Hitch, Pull Tarp System. Inquire Today! P.O.R.

STK# 30116A

2019 FREIGHTLINER NEW CASCADIA, Detroit DD15, 505 HP, DT-12 Trans, 12,500 FA, 40K RA w/Lockers, Airliner Susp, 229” WB, 3.08 Ratio, 72” Mid Roof. Bendix TPMS, Espar eng. htr, many more options! P.O.R.

STK# 30069T

2020 DOEPKER DSL30, 11R22.5 Wheels, Steel Rims, Black, 2 Tool Boxes. P.O.R.

TRAILERS

250-769-7255 1-888-878-2511

www.premiumtruck.ca

@premiumtruckkelowna

September 2019 cerns and make the case for exemptions to the Government of Canada. CTA was granted a hearing on Aug. 1 where staff and members carriers explained how the operational realities and economy of the supply chain is at odds with these provisions. Since then, CTA has also sent further correspondence to Minister Hajdu on the need for exemptions. CTA is now calling on the industry and their customers to let the Government of Canada know it is essential for the supply

chain that the trucking industry gets these exemptions. To assist companies in quickly communicating the message, CTA has put together the following documents: • Draft letter for carriers to send to the Government of Canada: CTA Sample Letter-New Labour Code Government public; • Draft letter for carriers to send to their customers educating them on the impacts of these changes: CTA Sample LetterNew Labour Code-cusContinued on page 59

Women In Trucking Association Earns A 2019 ASAE Power of A Silver Award Women In Trucking Association (WIT) has earned a 2019 American Society of Association Executives (ASAE) Power of A Silver Award for its innovative approach to increase the number of women in the trucking industry. ASAE honored the program launched by WIT to generate positive awareness of the trucking industry and plant the seed for the next generation of female drivers. The program has three components: the WIT truck driving doll named Clare, the Girl Scout/WIT Transportation Patch program, and the “Scouting for Cookies” activity book, where the reader follows a young girl through the supply chain to understand where Girl Scout cookies come from. This creative approach gives young women positive exposure to the industry before they even enter the workforce. “We applaud Women In Trucking for creating and implementing such a collaborative initiative that strengthens society,” said Sharon J. Swan, FASAE, CAE, chief executive officer of the American Society for Clinical Pharmacology and Therapeutics and chair of the Power of A Awards Judging Committee. “Their initiative exemplifies how no other sector helps improve lives as comprehensively as the association community.” The objective of the program is to expose young girls to the trucking industry in a positive way and educate them about career opportunities as well as safety around big trucks.

The goal is to reach as many children as possible, so this is an ongoing program within the WIT association. The short-term outcome is that more than 1,500 young girls have earned their Girl Scout transportation patch and 1,500 have a truck-driving doll named Clare. They are now more aware that their gender doesn’t define their profession and they can be anything they want to be. They are cognizant of the positive impact the trucking industry has on the economy and how to be safe around tractor-trailers. “The long-term outcome will be for these young girls to be engaged in the trucking industry. Their natural talents can serve the industry in a wide variety of roles. We hope to see these young girls grow up to be drivers, engineers, business owners, technicians, trainers, etc., because of the positive view they have of a respected industry,” said Ellen Voie, president and CEO, Women In Trucking. ASAE’s Power of A Awards, the industry’s highest honor, recognize the association community’s valuable contributions on the local, national and global levels. The Power of A Awards reward the outstanding accomplishments of associations and industry professionals who work tirelessly to solve problems, and strengthen lives, the workforce, the economy, and the world. b Source: Women in Trucking


September 2019 Continued from page 58

tomer public; and • Memo to Government of Canada highlighting real-life supply chain examples of how these Labour Code changes will disrupt the supply chain: CTA Sample Letter-Carrier Examples Labour Code public CTA is also asking the provincial trucking associations and other members of the supply chain to utilize this material with their membership. b Source: CTA

Supply Post · Our Readers Are Your Buyers

Women In Trucking Partners With Uber Freight The Women In Trucking Association (WIT) welcomes Uber Freight as its newest Silver Level Partner, backing the nonprofit association’s mission: to encourage the employment of women in the trucking industry, promote their accomplishments, and minimize the obstacles they face.

Decker Truck Line, Inc. Celebrates Delivery Of 2,500th Peterbilt Peterbilt Motors Company, along with Decker Truck Line, Inc., celebrated a relationship spanning six decades with the delivery of the transportation company’s 2,500th Peterbilt truck purchased from JX Truck Center. Decker runs a mix of Peterbilt vehicles, including the Model 579 UltraLoft, for both its refrigerated and flatbed operations. The company also runs Peterbilt’s Model 389 which is awarded to Decker’s most senior Professional Drivers. “Decker purchased its first Peterbilt truck more than 50 years ago starting a relationship that has continued to grow stronger through many decades of doing business together,” said Robert Woodall, Peterbilt’s Assistant General Manager for Sales and Marketing. “I am proud of the relationship Peterbilt has with Decker and I congratulate them on a long history of industry leadership.” “Over the years of purchasing Peterbilt trucks, I have enjoyed working with numerous Peterbilt general managers, sales executives, the JX Truck Center management team and various levels of support staff,” said Don Decker, President and Chairman of the Board, Decker Truck Line, Inc. “The partnership has been one of the most meaningful and rewarding relationships I have experienced. I think it speaks for itself how impressed we are with Peterbilt and JX as we take delivery of our 2,500th Peterbilt from JX Truck Center.” The 2,500th truck, a

custom 2019 Peterbilt Model 389, will be awarded to Decker’s 2018 Grand Champion Driver of the Year, Steve Alliger. Since joining Decker in 1997, Alliger has accumulated more than 3,000,000 miles of safe driving, and in 2018 alone he made more than 160 deliveries covering more than 150,000 miles. “Out of all our Professional Drivers, Steve was chosen to receive our 2,500th Peterbilt because he is dedicated to getting the job done right the first time and every time. Steve was chosen as our Grand Champion Professional Driver of the Year in 2018 because of his impeccable driving record,” said Decker. “He has driven more than 3.3 million safe miles, has nearly a perfect Driver Scorecard, no CSA violations or service failures and has been recognized for the dedication and pride he puts into his profession every day. Steve is just one of those Drivers who is a shining example of a true “Professional Driver” and we are very proud to have him represent Decker Truck Line and the trucking industry.” “On behalf of the nearly 1,000 employees at JX Truck Center we are honored and take great pride in delivering the 2,500th Peterbilt custom built Model 389 to Don Decker and the chosen recipient of the Decker Truck Line 2018 Grand Champion Driver of the Year, Steve Alliger”, says Eric Jorgensen, CEO & President. b Source: Peterbilt

Since joining in 2016, Uber Freight has actively participated in the association as a corporate member. Now supporting WIT at the Silver Level, the company is furthering their commitment to diversifying the industry. “Women in the trucking industry are paving the way for a more inclusive

freight future,” said Xinfeng Le, product manager. “Uber Freight is looking forward to collaborating with Women in Trucking to push the industry forward and create opportunities for everyone, whether they’re behind the wheel, dispatching for others, or in management.” “There’s never been a better time for women to join the industry, as both drivers and corporate leaders,” said Ellen Voie, WIT president and CEO. “With support from business leaders like Uber Freight, we are

Page 59 able call attention to the underrepresentation of women in the transportation industry and highlight the value that women can contribute. As drivers, women can help address the current capacity crunch. As leaders, studies show, women can significantly impact business success. We are grateful to Uber Freight for supporting our efforts to move the industry forward.” WIT is a resource for over 4,000 corporate and individual members located in the United States, Canada, and Mexico, as

well as Japan, Australia, Sweden, South Africa, and New Zealand. Significant initiatives include introducing a transportation doll, Clare, that familiarizes the next generation to the trucking industry, a recordbreaking attendance at the 2018 Accelerate! Conference and Exhibition, and the launch of Professional Development Certification (PDC) program to help women (and men) stand out in their careers. b Source: Women in Trucking

1015 Great St. Prince George, BC V2N 2K8 Dwayne Renshaw 250-612-7512

Byron Roberts 250-640-9599

1015 Great Street, Prince George, BC, V2N 2K8

2019 FREIGHTLINER 108SD SNOW & ICE , Cummins 370hp, Allison 3000RDS, 12’6” dump body, 11’ sander, 10’ reversing plow, underbody scraper. Winter is around the corner!

2019 K-LINE 45T SLIDING AXLE, 10’ wide, Warn 30,000 lb. winch w/100’ of wire rope, Lodar 10 function remote, two 4” strobes in rear light bar, 255/70R22.5 tires on aluminum wheels.

2019 FREIGHTLINER 122SD TRI-DRIVE, DD16 560/2050, RTLO-20918B, 20K FA, 69K RA, c/w Doepker quad logger with StrongArm 9’6” bunks, walking beam suspension. Ready to work.

2015 FREIGHTLINER 122SD TRI-DRIVE, ISX15 600/2050, Eaton Ultrashift transmission, 16K FA, 69K RA, 4.10 ratio, Airliner suspension, disc brakes

2019 FREIGHTLINER NEW CASCADIA DD16 560/1850, DT-12 automated manual transmission, 13300 lb. front axle, 46K RA, 3.42 ratio, Airliner, 72” XT sleeper.

2016 FREIGHTLINER 122SD TRI-DRIVE, ISX15 550, RTLO-18918B, 16K FA, 69K RA with 4.10 ratio and Airliner. Cummins extended warranty until May 12, 2021.

MAHINDRA 85P, fully enclosed cab, 4100 lb loader lift cap., 5500 lb 3 point hitch lift cap., common rail diesel fuel injection eng. w/ NO diesel particulate filter or DEF. 5 year powertrain warranty.

TRAILERS

1-800-595-4411

www.premiumtruck.ca

250-563-0696


September 2019 KENWORTH

Supply Post · supplypost.com

KENWORTH

Page 60

Kenworth T880S With Set-Forward Front Axle Adds Mid-Roof Sleeper Options The Kenworth T880S with a set-forward front axle is now available for order with Kenworth’s 52inch and 76-inch mid-roof sleepers. The T880S sleeper con-

figurations are focused on heavy haul and severe highway applications where ruggedness is especially required. The two sleeper options enable the T880S to meet both over-

all combination length and weight distribution needs, and are applicable for both Canadian and U.S. markets. Kenworth’s 76-inch midroof sleeper can be ordered

NEW LOCATION: 4600 Collier Place, Williams Lake, BC V2G 5E9

Eli Bergen: 250-267-8054

e.bergen@ premiumtruck.ca

Call for Pricing 2015 PETERBILT 367 TRI-DRIVE, ISX 15 - 550/2050, RTLO-20918B, 22K FA, 69K RA with Air Trac suspension and 4.10 ratio, logger cab guard, chain hanger and fenders.

Call for Pricing 2013 FREIGHTLINER 122SD TANDEM, ISX 15 - 550/1850, RTLO18918B, 14700 lb. front axle, 46K rear axles with Airliner suspension and 4.10 ratio, logging cab guard.

250-398-7411 | 1-877-878-2516

Call for Pricing

MAHINDRA 105 105 hp, 4 cylinder diesel, 24F/24R plus 8 creepers, 6860 lb. 3 point hitch lift capacity, 4129 lb. loader lift. Demo Price $76,000.00

2014 DOEPKER SUPER B LOGGERS, 2 bundles of 9'6" bunks, 1 bundles of 8'6", 11R24.5 tires on aluminum wheels, lift axles on lead trailer.

TRAILERS

www.premiumtruck.ca

Left: The Kenworth T880S with a set-forward front axle is now available for order with Kenworth’s 52-inch and 76-inch mid-roof sleepers. Right; Both sleepers provide excellent interior height clearance, enabling a driver or passenger up to 6-foot-4 to easily stand up between the seats. Specifying the 180-degree optional passenger swivel seat further expands the living space, and enables the driver to use both the cab and the sleeper as a comfortable space for relaxation – when not driving.

with either the optional back wall storage system or folding upper bunk. The optional Kenworth Idle Management System provides a factory-installed, batterybased auxiliary power unit (APU). A premium sound system and flat screen TV mount are among other options that provide further driver comfort and satisfaction. The Kenworth 52-inch mid-roof sleeper is a welcome sanctuary when the schedule requires a short layover. The sleeper features a liftable lower bunk and upper storage units on the sleeper’s back wall, including hanging storage for clothes and jackets. A bunk heater, flat screen TV, premium sound system and

factory-installed inverter with optional shore power are available for additional comfort. The many driver comfort amenities help give the Kenworth T680’s 52-inch mid-size sleeper the feel of a larger sleeper. Both sleepers provide excellent interior height clearance, enabling a driver or passenger up to 6-foot-4 to easily stand up between the seats. Specifying the 180-degree optional passenger swivel seat further expands the living space, and enables the driver to use both the cab and the sleeper as a comfortable space for relaxation – when not driving. “Our high-quality sleeper options for the T880S provides customers with

an additional opportunity for enhanced driver comfort in their efforts for costeffective operations and increased driver retention and recruitment,” said Kurt Swihart, Kenworth marketing director. The T880S is offered with a set-forward front axle ranging from 14,600 pounds to 22,800 pounds, and is standard with the PACCAR MX-13 engine with up to 510 hp and 1,850 lb.-ft of torque. For weight-sensitive applications, the 10.8-liter PACCAR MX-11 engine is 400 pounds lighter than larger displacement engines, and provides up to 430-hp and 1,650 lb.-ft of torque. b

Maxim Truck & Trailer Raises Over $1.5 Million For Cancer

osity of suppliers helped raise $28,600 of their total funds raised, a record for the longstanding annual event. Maxim has been a longtime supporter of many charities including those funding community organizations, the arts, amateur sports and health. Each year, a portion of the company’s profits are designated for charitable giving. Maxim Truck & Trailer has 17 branch offices and over 600 employees in 11 cities from Vancouver to Montreal. Maxim Truck & Trailer capabilities include the sale, rental, leasing, and complete after-sales service of new and used heavy duty trucks and trailers. b

On Saturday June 8, 2019 in Winnipeg, MB. Maxim Truck & Trailer had a team of 68 walkers and volunteers who raised $230,024 for CancerCare Manitoba’s 2019 Challenge for Life event. Maxim has been the top fundraiser for the Challenge for Life event raising $1,527,244 Million since the event’s inception in 2008. Participating every year since 2008 has been Doug Harvey, CEO of Maxim Truck & Trailer. “I am busting with pride,” says Doug Harvey. “We raise a lot of money, have a wonderful time,

Source: Kenworth

and show that Maxim cares about the needs of our community.” This year’s participants include every member of Maxim’s senior leadership team, including Mr. Harvey, among the 68 walkers; transportation crew and check stop volunteers. “It’s important that as leaders we walk the walk and not just talk the talk,” says Harvey. Part of the fundraising for the event takes the form of Maxim’s Annual Charity BBQ held on May 23, 2019 in Winnipeg, a large crowd of Maxim employees, their families, customers and the gener- Source: CNW Group


September 2019

Supply Post · Our Readers Are Your Buyers

NORTH AMERICA’S LARGEST CONSTRUCTION TRADE SHOW

CONEXPOCONAGG.COM MARCH 10-14, 2020

|

LAS VEGAS, USA

Page 61


TRUCK PHOTO ADS Book your ad online at: supplypost.com/advertise/classifieds or call 1-800-663-4802 today! PAGE 62 · SEPTEMBER 2019

WWW.SUPPLYPOST.COM

1993 KENWORTH T800

1980 KENWORTH W900

Cummins N14 500 HP 18 SPD . Engine Rebuilt Two Trips Ago. VHF Radio, Sirius Radio, Chains & Boomers, Tire Chains, Winter Front, Headache Rack, Road Lights. SN #: 2XKDD69XXPM930059, Hrs: 2400.9, Kms: 179254.4. $35,000. Whitehorse, Yukon

Long nose (hard to find), 5&4 transmission, Cat engine 3406A, sleeper, power tower, very clean truck. 5,335.3 hours, Kms: 03314.4, Serial #: 909024M. $20,000 OBO. Whitehorse, Yukon

HOMER ENTERPRISES · WHITEHORSE, YK

HOMER ENTERPRISES · WHITEHORSE, YK

2018 RAM 5500 4X4 PICKER DECK

2015 KENWORTH T800 COMBO VAC TRUCK

Phone: 867-668-1985 · ggholm@gmail.com

Phone: 867-668-1985 · ggholm@gmail.com

2019 RAM 3500 4X4 SERVICE BODY

2018 RAM 5500 WTW SERVICE BODY

1525KM, 2019 Crew Cab Chassis, 6.7 Cummins Turbo Diesel, 6 Spd Aisin auto, 4X4, 9ft Mechanics Service Body, VMac G30 Rotary Gas Compressor, American Eagle 8 drawer tool chest. Fleet Price $110,569 + $698 Ad min Service,+ Taxes. Stk# F-19C32926. DL# 30541 .

1525KM, 6.7 Cummins Turbo Diesel, 6 Spd Aisin auto, 4X4, 11 Ft Mech Service Body, 5000 lb Auto Crane EHC5 crane w/ wireless cont., VMac VR70 U/Hood Comp., American Eagle 8 drawer tool chest, back up camera. Fleet Price $159,995 + $698 Admin Service + Taxes. Stk# 18R51659 DL#30541.

NORTHLAND CHRYSLER DODGE JEEP RAM

NORTHLAND CHRYSLER DODGE JEEP RAM

Call Murray 1-888-457-6908 www.northlanddodge.ca

2010 KENWORTH T800

Call Murray 1-888-457-6908 www.northlanddodge.ca

2017 KENWORTH T660

IN STOCK - FINANCING AVAILABLE OAC 200 KM, 6.7 Cummins Turbo Diesel, 6 Spd Aisin automatic, 4x4, 551A4 Ferrari Crane, 24" Cross Box with American Eagle tool cabinet, 3" rub rail with stake pockets, goose neck drop ball. $121,995 + $698 Admin Service + Taxes. Stock# 18R51660. DL# 30541.

NORTHLAND CHRYSLER DODGE JEEP RAM Call Murray 1-888-457-6908 www.northlanddodge.ca

2015 Tri Drive Kenworth combo vac, winter package, Hotsy boiler, Cat pumps, Roboshi blower, 2,400 hrs, 78,000 kms, runs great, ready for work. $350,000 OBO.

Hiab crane/picker truck, C13 470HP Cat engine, 13 speed, 20K F/axle, 69K R/axle, 4.30 ratio, 231,822 kms. Call for price.

MX 500 Engine, 13 speed Auto, 3.42 ratio, 40K R/axle, 13.2K F/axle, 86" studio sleeper, 763,653 kms. Call for price.

KPA OILFIELD SERVICES

GREATWEST KENWORTH CALGARY

GREATWEST KENWORTH CALGARY

kurt@kpaoilfieldservices.ca · 250-788-6933

Kenworth Montréal Celebrates Remodeled Dealership: $2.6 Million Major Renovation Now Complete A grand celebration was held recently to mark the completion of a major $2.6 million (CAN$) remodeling and renovation project at the Kenworth Montréal dealership in Saint-Laurent, Quebec. According to Mike Parent, Kenworth Montréal general manager, more than 200 people attended the special open house. “Our new look dealer-

ship is not only a beautiful building, it’s very comfortable and convenient for our customers,” said Parent. “We’re right off the Trans-Canada Highway. When customers pull in for service, there is a spacious undercover truck receiving area that provides protection from inclement weather. Inside, we’ve completely re-done our drivers lounge – complete

with TV, Wi-Fi, comfortable couches and chairs, plus microwaves and a relaxing area to enjoy a meal. The men’s and women’s shower facilities were remodeled to enhance the customer experience.” The two-story, 31,000 square-foot building on three acres features large sliding doors that support the indoor showroom and Kenworth truck display.

Call Troy direct at 403-537-2292

The driver’s lounge is inside the showroom and features innovative movable walls, which allows flexibility in room configuration and increased space for the dealership’s customer events. “It’s also a wonderful workplace for our employees as our offices and conference rooms were also remodeled,” said Parent. With 20 service bays, Kenworth Montréal is one of the larger service facilities in all of Canada, and operates 7 days a week with multiple shifts. “We’re open more hours than anyone else in Montréal, and have 40 service

Call Troy direct at 403-537-2292

technicians located at two service points,” said Parent. “Uptime is vital to our customers, so our hours of service reflect our commitment to fast turnaround times for our customers.” With the neighboring PACCAR Parts Distribution Center also remodeled during the same time frame as the dealership, parts availability and a focus on customer uptime is proving to be the winning formula in optimizing the customer experience, said Parent. Within Kenworth Montréal’s territory, customers looking for parts and service support will find two TRP stores (Vaudreuil-

Dorian and Laval), which provide parts for all makes of trucks, a Kenworth parts store (Saint-Jerome) and the Lanoraie and SaintLaurent facilities, which offer full parts and service operations. As a result of the dealership’s investments and efforts to help maximize customer uptime, Kenworth Montréal has achieved the prestigious Kenworth PremierCare Gold Certified status. The dealership is located at 7500 Trans-Canada Highway in Saint-Laurent, Quebec. The phone number is 514-735-2581. b Source: Kenworth


September 2019

Supply Post · Our Readers Are Your Buyers

Page 63

SEARCHING FOR PARTS?

The Completely Searchable Supply Post Parts Database Is Here!

WWW.SUPPLYPOST.COM/parts Truck Parts, Equipment Parts, And More Search By Part # Search By Keyword Locate That Part You Need Before You Pick Up The Phone!


Page 64

Supply Post · supplypost.com

September 2019

OCEAN TRAILER IS WESTERN CANADA’S TRAILER SPECIALIST. SPECIAL PEOPLE CREATING EXCEPTIONAL PLACES.

NOW AVAILABLE!

2020 Wilson Super B Curtainsides!

Wilson Quad Flats

Titan Super B Walking Floor Chip Hauler

Super B Flats Call For Great Pricing!

Fontaine All Aluminum Flat

Chip Trailers

Wilson Tridem Step Deck *IN STOCK NOW*

Delta (800) 891-8858

Nanaimo (877) 878-5979

Prince Rupert (250) 627-1981

Edmonton (800) 610-1019

Tridem Combo Chassis - In Stock

Neustar Demo Box

New All Steel Tridem, Flats & Steps.

Calgary (877) 720-7171

WWW.OCEANTRAILER.COM

Winnipeg (866) 397-5524


Celebrating 31 Years! 1988-2019 ENGINES FOR SALE

Forax Equipment’s innovative brush cutter designs are based on more than 20 years of experience in the forestry industry. They are focused on designing and producing uncomplicated and dependable brush cutting heads for excavators and arms and heads for road graders, as well as for snowmobile groomers.

WHOLE MACHINES FOR SALE 2007 VOLVO G970 STK#E003385 Rops: Enclosed; Volvo D9B Diesel Engine (210 - 250 Hp) Volvo HTE1160 Transmission, Low Profile Cab c/w Air Conditioning, 14’ Moldboard, Accumulators, Float Valves, 20.5x25 Tires $112,800 PLUS ATTACHMENTS

JD & CUMMINS — Call for info

2010 VOLVO G940 STK#E001968 Volvo D7 (175, 195, 215 Hp) Diesel Engine, 11 Speed Transmission, 14’ Moldboard, 17.5x25 Tires,

TIRES FOR SALE

$98,900 PLUS ATTACHMENTS

2003 G740B Stk C0000079 Volvo D10bgea2 (219-243Hp) Diesel Engine, Volvo 8400 Transmission, Low Profile Cab, Air Conditioning, 14’ Moldboard, 17.5X25 Tires. $68,600.

JD RIMS, 17.5 x 25 SnoPlus tires. Set of 4 available. CALL FOR DETAILS

10807 - 209 Street, Edmonton, AB T5S 1Z7

Toll Free: 1-800-663-0715 • Tel: 780-452-7021 • Fax: 780-453-1477

47 Forest Plain• Volvo Road,Graders Oro-Medonte, L3V 0R4 Your Source for Champion Graders • VolvoONLoaders

Toll Free: 1-866-404-5233 • Tel: 705-325-2777 • Fax: 705-325-9777

www.jadeequipment.com | info@jadeequipment.com

Profile for Supply Post Newspaper

Supply Post September 2019  

September 2019 Supply Post Newspaper, Canada Wide edition

Supply Post September 2019  

September 2019 Supply Post Newspaper, Canada Wide edition