Supply Post November 2020

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER · SUPPLYPOST.COM COM

Family Owned Since 1971

VOL. 49 · NO. 11

NOVEMBER 2020

Advertiser’s Index 6 | Section Two 25 | Classifieds 33 | Section Three 41 | Truck Photo Ads 54 | Publications Mail Agreement #40070144

TURN-KEY BUSINESS OPPORTUNITY

2015 BRON TR450 TRENCHER

2018 JOHN DEERE 204K

2018 CAT D3K2 LGP CRAWLER DOZER

Well established 22-yr. old Truck & Crane Company located in Nanaimo, BC. Turn-key fully op. business. See page 33 for more info.

450 HP, Cummins GSX15 engine, 475 hrs. $575,000. See page 38 for more details.

Cab w/ AC; Coupler; General Purpose Bkt; 405/70R20. See page 36 for more info.

(UNUSED), c/w 8 way blade, A/C Cab, Tier 4 EPA Engine. $175,000. See page 33 for more.

DUDECK TRUCK & CRANE Susan 250-668-9310 · suenew@shaw.ca

EDGE EQUIPMENT · 1-855-714-3343 sales@edgeequipment.com

BRANDT PHONE: 888-2BRANDT

HAYCO RENTALS & SALES brian@haycoequip.com · 604-526-7260

The Next Generation Of Western Star: 49X

DAIMLER

Western Star has introduced the all-new 49X, its next-generation vocational truck built from the ground up to meet the needs of the most demanding applications.

PAGE 52

NEW OEM EXCAVATOR COMPONENTS

Pumps, Final Drives, Engines, Swing Motors & More VANDERVELDT EQUIPMENT PARTS LTD.

250-951-2082

Page 2

Supply Post · supplypost.com

November 2020

RENTALS • SALES • CONTRACTING SALES & RENTALS: Dave 778-855-4190 dave@unitedearthcontractors.com OFFICE: 604-940-0001 | Fax 604-940-0005

D L O S H T BO SALE PRICE $70,000 ea.

$90,000 ea.

1 OF 2 UNITS AVAILABLE. 2007 KOMATSU HM 300-2 Approx.11-12 k hrs on each. Good runners, ready to work.

$54,000 JD 350D, thumb, guarded, catwalks, 12K hours.

D L O S H T O B SALE PRICE $94,000 EA 1 of 2 - JD 450D, thumb, guarded, catwalks, 2 buckets 12K hours.

$89,900 2008 LINKBELT 240-2 3,000 hrs on new motor, 0 hrs on new hydraulic pumps, c/w - thumb catwalks, guarding and 2 buckets.

MULTIPLE DOZERS FOR SALE AND RENT

2003 VIBROMAX 84” Padfoot compactor Stk# CP140 ..................................................... $30,000.

2012 VIBROMAX VM 132 84” roller 3500 hrs Stk # CP212 ....................................................SOLD $50,000.

2001 VIBROMAX w1105PD padfoot compactor 4000 hrs Stk # CP208 .................................... $34,000.

2008 BOMAG BW211D-40 compactor Stk# CP88 ....................................................... $45,000.

2001 CAT CP563D compactor 6600 hrs Stk# CP210 .................................................... $40,000.

2000 INGERSOLL-RAND 84” compactor Stk# CP206 .................................................... $34,000.

2007 LINK-BELT 290 X2 EXCAVATOR 11000 hrs Stock # EX214 ............................... $84,000.

2012 CAT 336EL EXCAVATOR 8500 hrs Stk# EX222 .................................................. $165,000.

2011 CAT D6K DOZER Stock # DZ162 .. $110,000.

2014 YANMAR SKID-STEER 1200 hrs Stk# LD072 ....................................................SOLD $30,000.

2012 VOLVO A35F ROCK TRUCK 7500 hrs Stk# AT240 ................................................... SOLD $230,000.

2012 VOLVO A35F ROCK TRUCK 7100 hrs Stk # AT250 .................................................. SOLD $230,000.

2007 CAT 950H LOADER 23k hours Stk # LD074 ................................................... $65,000.

2012 CAT 966H LOADER 15k hours Stk # LD070 .................................................. $140,000.

2001 CAT 980G LOADER Stk# LD174 .... $85,000.

2015 JOHN DEERE 850K LGP CRAWLER TRACTOR 5400 hrs Stk# DZ176 .............. $350,000.

2014 JOHN DEERE 850K WLT CRAWLER TRACTOR 5600 hrs Stk# DZ174 ............... $350,000.

1 OF 4 VOLVO A25C, All in good condition and ready to work Very very clean units.

4 available JD 350G GP & dig bucket, U/C 90%, pads look new.

Starting at $150,000.

$79,000 JOHN DEERE 240D 8,200 hrs, W/B lugging and Q/C, new U/C, Good runner and ready to work.

$159,000 VOLVO A30D WATER TRUCK Hyd. driven water tank, 11K hours.

SALE PRICE

$230,000 EA 2014 VOLVO A30F 80% tires, 750/65R25 wide tires, rear camera, approx. 9,000 hours and ready to work.

(1 of 2)

$129,000 2008 CAT D6T 6 WAY A/C, diff steer, SystemOne U/C, ripper/forestry pkg avail. hard nose & front end all rebuilt. Only 14,000 hrs.

Min. hrs on rebuilt engine.

$75,000 2005 D6R XL U/C 75% good runner, well maintained and ready to work.

$110,000

$105,000 2011 CAT 160M MOTOR GRADER 13,000 hrs, tires at 85% and machine is ready to work.

VOLVO A25G 1 OF 6, 3-5K HOURS

CAT 740 ROCK TRUCK C/W Hyd water tank drop in

STARTING AT $300,000.

FIND MORE AT UNITEDEARTHCONTRACTORS.COM

November 2020

Supply Post · Our Readers Are Your Buyers

Page 3

4204 42 Ave., Innisfail, AB

CALL TODAY! 1-844-470-4608

2014 CATERPILLAR 262D SKID STEER, STK #1676, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Q/C, Positive Air Shutoff, 74HP, 2,700lb Lift Capacity, Counter Weights, 1,983 Hrs .............................................................................$45,000.

2014 CATERPILLAR 246DSKID STEER, STK #1638, Enclosed Cab, (CAT) Diesel, Heat, Air, Ride Control, Hyd. Quick Connect, Positive Air Shut Off, 74 HP, 2,150lb Lift, Counter Weights, 1,135 Hrs ..........................................................$42,500.

2014 BOBCAT S550 SKID STEER, STK #2353, Enclosed Cab, (Kubota) Diesel, Heat/Air, Aux. Hydraulics, Hand/Foot Controls, 61 HP, 1,750lb Lift, 3,631 Hrs ......................$29,500.

2008 KOMATSU SK820 SKID STEER, STK #2311, Enclosed cab, Yanmar Diesel, Block Heater, Heat, 2-Spd., Aux. Hyd., Pos. Air Shut-off, 54 HP, Counter Weights, 1900lb lift, 4,171 Hrs..............................................................................$21,000

2012 JLG G10-55A TELEHANDLER, STK #2489, 4WD, (Cummins) Diesel, Heat, Air, Aux. Hyd., 125 HP, 55’ Lift, 42’ Reach, Pos. Air Shut-off, 3-Way Steer, Frame Tilt, Weights, Outriggers, 10,000lb Lift, 6,611 Hrs ............................... $75,500

2011 JCB 550-170 TELEHANDLER, STK #2517, 4WD, (JCB) Diesel, Enclosed Cab, Heat, Air, 109 HP, 54’ Lift Hgt., 41’ Horz. Reach, 3-Way Steering, Frame Tilt, Positive Air Shutoff, Counter Weights, Outriggers, 10,000lb Lift, 9,778 Hrs ...............................................................................................$67,500.

2011 SKYTRAK 10054 TELEHANDLER, STK #2487, 4WD, Cummins Diesel, Enclosed Cab, Heat, 110 HP, 54’ Lift Hgt., 39’ Horz. Reach, 3-Way Steering, Outriggers, 10,000lb Lift, 7,962 Hrs .............................................................................$62,500

2012 XTREME XR1255 TELEHANDLER, STK #2345, 4WD, Enclosed Cab, (Perkins) Diesel, Block Heater, Heat, Fan, Aux. Hyd., 55’ Lift Hgt., 38’ Horz. Reach, 3-Way Steering, Frame Tilt, Outriggers, Pos. Air Shutoff, Counter Weights, 12,000lb Lift, 2,005 Hrs .............................................................................$98,500.

2008 GENIE Z60/34J ARTICULATING BOOM Lift, STK #2171, 4WD, (Perkins) Diesel, Pos. Air Shut-off, 60’ Platform Height, 34’ Horz. Reach, 8’ Platform, 500lb Lift, 5,713 Hrs ....... .......................................................................... $35,500

2012 GENIE S65 STRAIGHT BOOM LIFT, STK #2289, 4WD, (Deutz) Diesel, Block Heater, 65’ Platform Height, 56’ Horizontal Reach, 8’ Platform, PAS, Foam Filled Tires, 500lb Lift, 3,873 Hrs..................................................................................$63,500

2007 GENIE S85 STRAIGHT BOOM LIFT, STK #2521, 4WD, (Deutz) Diesel, 85’ Platform Hgt., 76’ Horz.

Reach, 8’ Platform, Pos. Air Shutoff, Welder Ready, 500lb Lift, 6,035 Hrs ................................................................$42,500

2015 CAT 277D SKID STEER, STK #2553, Enclosed Cab, (C3.3B) Diesel, Heat, Air, Stereo, 2-Spd., Aux Hyd., Q/C, Ride Control, Self Levelling, ISO Control, 73 HP, 3,290lb Lift, 2,266 Hrs.........................................................................................$48,500

2015 JOHN DEERE 323E SKID STEER, STK #2498, (John Deere) Diesel, Enclosed Cab, Heat, Air, 2-Spd., Aux. Hyd., 74 HP, Quick Connect, Hand/Foot Control, 2,590lb Lift, 2,476 Hrs.........................................................................................$41,500

2017 CATERPILLAR 279D SKID STEER, STK #2223, Enclosed Cab, (CAT C3.3) Diesel, Heat, Air, 2-Spd., Aux. Hydraulics, Q/C, Ride Control, Hand/Foot Control, 72 HP, 3,000lb Lift, 1,121 Hrs.................................................................... $69,500

2017 CAT 289D SKID STEER, STK #CC7986, Enclosed Cab, (CAT C3.3B) Diesel, 2-Spd., B/U Camera, Hyd. Q/C, Heated Seat, Air Ride Seat, 72 HP, 3,800lb Lift, 4,200 Hrs....$43,500

2008 KOMATSU WA200 WHEEL LOADER, STK #2441, Enclosed Cab, (Komatsu) Diesel, Heat, Air, 4-Spd., Aux. Hydraulics, Positive Air Shut-off, Quick Connect, 127 HP, 11,054 Hrs......................................................................................... $59,500

2009 PRINOTH BR500 BEAST SNOWCAT, STK #2307, Enclosed cab, (CAT) Diesel, Heat, 82” Tracks, 204” Blade, 8-Way Blade, Rear Tiller Sold – 10,965 Hrs............................ $52,500

2005 CASE 580M TURBO SII, STK #2236, (Case Family III 445/M2) Diesel, Heat, Air, Extend-a-Hoe, Aux. Hyd., Outriggers, R/C, 80 HP, 82” Loader, 17” Tooth Rr. Dig, 6,124 Hrs......................................................................................... $42,500

2011 VOLVO BL70 BACKHOE, STK #2309, (Volvo) Diesel, 4WD, Enclosed Cab, Heat, Air, Auxiliary Hydraulics, Outriggers, Extend-A-Hoe, 94 HP, 92” Front Bkt., 21” Rear Dig Bkt., 14’ Dig Depth, 3,239 Hrs....................................................................$56,500

2011 JCB 436E HT, STK #2522, Enclosed Cab, 6-Cyl. (Cummins) Diesel, Heat, Air, 4-Spd., 3rd Valve, Hydraulic Quick Connect, Heated Seats, 173 HP, 105” Bucket, 9,689 Hrs ......... ...............................................................................................$68,500

2014 JOHN DEERE 544K WHEEL LOADER, STK #2494, (John Deere) Diesel, Enclosed Cab, Heat, Air, 176 HP, 2 Spd., Aux. Hyd., Q/C, Counter Weights, 114” Bucket, Forks Avail., 9,411 Hrs .........................................................................$115,000

2011 JOHN DEERE 544K LOADER, STK #2495, (John Deere) Diesel, Enclosed Cab, Heat, Air, Heated Seat, 176 HP, 2-Spd., Aux. Hydraulics, Q/C Pos. Air Shut-off, Counter Weights, Forks, 110” BKt., 10,550 Hrs...........................$89,500

2009 CASE 1221E WHEEL LOADER, STK #2351, Enclosed Cab, (Cummins) Diesel, 4-Speed, Heat, Air, Ride Control, Emergency Steering, 335 HP, 132” Bucket, 7,340 Hrs...........$122,500

2005 GENIE Z45/25 ARTICULATING BOOM LIFT, STK 1990, 4WD, (Perkins) Diesel, 45’ Platform Height, 25’ Horizontal Reach, 6’ Platform, 60HP, 500lb Lift, 3,961 Hrs..... ........................................................................$32,500

FOR COMPLETE INVENTORY www.groundhogsales.com

Page 4

Supply Post · supplypost.com

WE KEEP CANADA ON TRACK

www.morookacarriers.com

1-877-667-6652

November 2020

November 2020

Supply Post · Our Readers Are Your Buyers

UNRESERVED COMPLETE DISPERSAL FOR WESTSIDE LOGGING LTD. & MAJOR REALIGNMENT FOR C&C WOOD PRODUCTS AND VARIOUS CONSIGNORS.

Page 5

UNRESERVED

AUCTION

IN PERSON VIEWINGS: Oct 22-24: 9am - 5pm, Nov 14-20: 9am - 5 pm, 1741 Campbell Cresent, Quesnel, BC.

Bidding Opens Saturday - Nov 21@ 9am | Bidding Closes Tuesday - Nov 24 @ 9am CONSIGNMENTS WELCOME  CALL TRAVIS MATYCIO AT 4037931269

2 AVAILABLE

2014 KENWORTH T800 TRIDRIVE DAY CAB LOG TRUCK

2011 WESTERN STAR 4900SA TRIDRIVE, DAY CAB LOG TRUCK

2011 WESTERN STAR 4900SA TRIDRIVE DAY CAB TRUCK TRACTOR

2015 KENWORTH T800 TRIDRIVE SLEEPER TRUCK TRACTOR

1 OF 5 HITACHI ZX210F PROCESSORS

2018 HITACHI ZX310FLL6N LOG LOADER

2010 JOHN DEERE 2954 LOG LOADER

2016 TIGERCAT X870C FELLER BUNCHER

2015 KENWORTH T370 4X4 SERVICE TRUCK

1 OF 2 CASTLETON SUPER B LOG TRAILER

2019 ASPEN 55 T TRIDEM DETACHABLE HYD DOUBLE DROP TRAILER

1 OF 2 2019 TITAN 53 FT SHUFFLE FLOOR TRAILER

1 OF 3 JOHN DEERE GRAPPLE SKIDDERS

2005 FABTEC 584C FORWARDER

2006 DOEPKER SUPERB HIBOY

1995 CATERPILLAR D8N CRAWLER TRACTOR

1980 CANOE COVE 36 FT. BOAT

Check Out Our Website For More Listings

2011 FORD F350 XLT CREW CAB 4X4 PICKUP

2013 CATERPILLAR M325D LMH MATERIAL HANDLER 4X4 MOBILE EXCAVATOR

2007 JOHN DEERE 700J CRAWLER TRACTOR

1989 ALFA ROMEO QUADRIFOGLIO VINTAGE AUTOMOBILE

www.teamauctions.com

1989 RAYGOWAGNER L120 LOG LOADER

1 OF 7 SKID MOUNTED WELLSITE

FULL DISPERSAL OF MISC ROUGH CUT AND FINISHED PRODUCTS

BY C & C WOOD PRODUCTS LTD

Call Cory Dueck@ 403-634-6217 For More Info

Page 6

Supply Post · supplypost.com

INLAND

Inland Opens New Fort St. John Facility at Existing Location

Inland has announced they have completed construction on their new Fort St. John facility. Built on the existing 8.5-acre property located at 10611 Finning Frontage Road, the new facility is more than double the previous building size, sitting at 84,000 sq. ft.

The larger facility contains 25 service bays which will operate on heavy-duty

trucks and equipment and two wash bays. The parts department boasts 28,000 sq. ft allowing for a spacious retail display area and a well-stocked parts warehouse.

The Fort St. John service department is equipped with a frame straightening bay for trucks and trailers, full truck and equipment service for maintenance and repair work, fabrica-

“The new facility allows for a better, more efficient workflow,” said Boyd McConnachie, VP of Business Development at Inland.

“This means we can better serve our customers, in a faster more effective manner, which allows them to get back to their business sooner. At Inland we take pride in the fact that we consistently reinvest in our business and believe this strategy has provided and will continue to provide all stakeholders with an improved experience.”

Construction alongside the previous facility began in June 2019. In January 2020, the business moved into the new building to demolish the previous one, and now the new facility is fully ready.

“We would like to thank our customers and employees for their patience during the construction process,” said Jaret Pieper, General Manager of Inland’s Fort St. John dealership. “One of the many things we’re excited for is better showcasing our product lines in the yard, which makes for a more engaging customer experience.” b

tion, full rig ups, and mobile service trucks for onsite service.

This investment represents Inland’s commitment to Fort St. John’s trucking, forestry, construction, utilities, and mining industries.

Inland Fort St. John offers new and used heavy-duty trucks and equipment as well as complete business support through parts, serSource: Inland vice, and financing.

For more info call Bob: (604)220-2174 or Henry: (604) 850-3601 ext. 226

THE HARDEST WORKING WARRANTY ON THE JOBSITE.

For More info on Morooka Rentals & Other Used Equipment Call 604-850-4654

November 2020

ADVERTISERS INDEX Alberta Engine ................................. 33

Machinery Supply ......................29, 30

Arrow-West ...................................... 16

Magnum Attachments...................... 10

Banning Equipment ...................18, 34

Major Equipment ............................. 37

B & G Parts ..................................... 29

McEown & Associates ..................... 33

Brandt.......................................12, 13

Merlin Gise ...................................... 37

Brandt Truck Rigging ........................ 42

Milk Ranch ...................................... 34

Brandt Value Parts........................... 20

Mormak .......................................... 27

Brikers ............................................ 17

Morooka ........................................... 4

Brown International ......................... 34

Mountainside Equipment ................. 36

Brutus Bodies.................................. 11

Nor Mar Industries ........................... 11

CEC Canadian Equipment Co. .......... 21

Norstone Excavating ........................ 21

Chieftain Equipment ..................31, 39 Coastal Pacific Equipment ............... 36 Cold Water Contracting .................... 33 Continental Equipment ...................... 8 Crawler Sales .................................. 20 Dolphin Mechanical ......................... 36 Doosan ........................................... 22 Edmonton Trailer ............................. 45 Equip. Sales & Service .................... 18 FCL Financial................................... 14 FLO Components ............................. 14 Foreman Equipment ........................ 25 Forestech ........................................ 14 Groundhog Sales & Rentals ............... 3 Handlers Equipment .......................... 6 Hikon Industries .............................. 28 Hope Mechanical ............................ 38 Hydrema ......................................... 10

Ocean Trailer ................................... 56 Pacific Rim Equipment....................... 7 PM Industries .................................. 47 Premium Truck & Trailer .......48, 49, 50 Prince George Truck ......................... 35 P & R Truck Centre .......................... 41 Querel Trailers ................................. 44 Ritchie Bros..................................... 21 RLC Aggregate ................................. 30 Robert Watson ................................ 43 Rollins ............................................ 10 Royquip .......................................... 35 Saratoga Ventures ............................. 9 Sexsmith Farm Parts ........................ 34 Skreenquip...................................... 26 Team Auctions................................... 5 The Groundworx Co. ...................27, 32

Infinity West .................................... 37

Trak Tech......................................... 16

Inland Equipment ............................ 15

Trans East Trailers ........................... 51

Inland Group ................................... 24

True North Equipment ...................... 38

Interior Diesel .................................. 28

Tyalta .............................................. 40

Jade Equipment ................................ 1

United Earth Contractors .................... 2

K-Line Trailers ................................. 46

Vanderveldt Parts .............................. 1

Kubota .............................................. 9

Van-Ed Equipment ........................... 16

Langley Excavator Parts ................... 17

Wally’s Private Parts ........................ 37

LiuGong .......................................... 20

Wheeler Equipment ........................... 8

Lonetrack Equipment ....................... 31

Woodland Equipment ...................... 19

LSW Wear Parts ................................. 8

Wyatt’s Used Equipment .................. 35

NEXT DEADLINE: Friday, November 13, 2020

339 Sumas Way, Abbotsford

THE HARDEST WORKING WARRANTY ON THE JOBSITE.

#105, 26730 - 56th Avenue, Langley, B.C. V4W 3X5

$44,900 1998 Morooka MST800V w/Crane, 2-spd., Good U/C 75% left, Boom crane extends approx. 9’ & can pick-up approx. 5,000lbs., 2,879 Hrs.

www.supplypost.com

PHONE 604-607-5577 | TOLL FREE 1-800-663-4802 President ...................................Jeff Watson Account Manager ................... Jake Peterson Managing Partner, Finance ....Debra Watson

Marketing Administration ......Jennie Stevens Art Director/Social Media ...........Linda Horn Web & Graphic Designer ......... Lisa Schmale

CIRCULATION

Direct Mailed copies .............. 22,300 Newsstand copies .................... 6,000 Total distribution .................... 28,300 Please call our office for full details

$39,900 2004 LiuGong 856, 3.5 yard Bucket, Good Tires, Strong Shift, Good Brakes, 7,800 Hrs

5 YR 3 YR

STRUCTURAL

STANDARD

*Limited lifetime warranty on the center pin.

5 YR 3 YR

With 3-year/3,000-hour standard coverage and 5-year/10,000-hour structural coverage, our machines are backed by the hardest working warranty around, and guaranteed to keep you up and running longer.

With 3-year/3,000-hour standard coverage and 5-year/10,000-hour structural coverage, our machines are backed by the hardest working warranty around, and guaranteed to keep you up and running longer.

TOMORROWSEDGETODAY.COM

STRUCTURAL

STANDARD

www.handlersequipment.com TOMORROWSEDGETODAY.COM

*Limited lifetime warranty on the center pin.

Published Monthly - Printed in Canada Publications Mail Agreement No. 40070144 Reproduction of any material including photographs and/or advertisements in whole or in part is forbidden.

The Supply Post is a proud member of the following Trade Associations:

INTERIOR LOGGING ASSOCIATION

$94,000 2014 Hyundai Robex 210 LC-9, c/w 2 Buckets, Hydraulic Quick Change & Hydraulic Thumb, U/C has 85% Left, Nice Cond. For the year, 7,239 Hrs .

RETURN UNDELIVERABLE CANADIAN ADDRESSES TO CIRCULATION DEPT.: (Covers/Labels Only)

No. 105, 26730 - 56th Avenue, Langley, BC V4W 3X5

November 2020

Supply Post · Our Readers Are Your Buyers

Page 7

Phone: 250-493-4545 Fax: 250-493-8819 AFTER HRS, Joe Hewer: 250-490-6795 AFTER HRS, Dave Garnett: 250-490-7976

1698 Dartmouth Rd, Penticton, BC V2A 4B8

RENT OR RENTAL PURCHASE AVAILABLE $CALL

$CALL

2008 KOMATSU PC220LC-8 32" PADS, AIR, 2 BKTS, HYD THUMB, ONLY 4,750 HRS. PRE EMISSIONS, NO REGEN NO DEF.

2013 HITACHI ZX135US-3 28" PADS, AIR, L/ARM, Q/C HYD THUMB, ONLY 1,683 HRS. YANMAR EXCAVATORS

(2) 2020 YANMAR SV08-1B CANOPY, RUBBER 2 BKTS Q/C, 2'3"-2'9" WIDE ......CALL (3) NEW YANMAR VIO17-A CANOPY, 2 BUCKETS HYDRAULIC THUMB ............... CALL NEW YANMAR VIO25-6A CANOPY RUBBER, 2 BKTS HYD THUMB ...................... CALL 2019 YANMAR VIO35-6A RUBBER, CANOPY, HYD THUMB, 2 BKTS,165 HRS...... CALL NEW YANMAR VIO35-6A RUBBER, CANOPY, 2 BKTS, HYD Q/C .......................... CALL NEW YANMAR VIO35-6A CAB AIR STEEL(BOR), HYD THUMB, 2 BKTS, 222 HRS ......... ........................................................................................................................... CALL (6)NEW YANMAR VIO35-6A CAB AIR RUBBER, 2 BUCKETS HYD THUMB ........... CALL NEW YANMAR VIO35-6A CAB AIR RUBBER, ANGLE BLADE, 2 BKTS, THUMB CALL NEW YANMAR VIO50-6A ANGLE BLADE, CAB AIR, 2 BKTS HYD THUMB ............ CALL NEW YANMAR VIO55-6A CAB AIR RUBBER TRACKS, HYD THUMB, 2 BKTS, 230 HRS.. ........................................................................................................................... CALL NEW YANMAR VIO55-6A BOLT ON RUBBER, HYD Q/C, HYD THUMB, 2 BKTS, 84 HRS ........................................................................................................................... CALL (4) NEW YANMAR VIO55-6 CAB AIR RUBBER, HYD THUMB, 2 BKTS .................. CALL 2019 YANMAR VIO80-1A STEEL BOR, BLADE, HYD THUMB, 2 BKTS, 584 HRS ...CALL (2) NEW YANMAR VIO80-1A STEEL, CAB AIR, BLADE, HYD THUMB, 2 BKTS ..... CALL 2019 YANMAR SV100-2A STEEL, HYDRAULIC THUMB, 2 BKTS, 672 HRS .......... CALL 2019 YANMAR SV100-2A STEEL, HYD THUMB, 2 BKTS 669 HRS ......................CALL (4) NEW YANMAR SV100-2A STEEL, CAB AIR, HYD Q/C, 2 BKTS, HYD THUMB ........CALL NEW YANMAR SV100-2A RUBBER TRACKS, HYD THUMB, 2 BKTS.................... CALL

BRAND NEW YANMAR EXCAVATORS IN STOCK MORE ARRIVING DAILY

EXCAVATORS

2005 YANMAR VIO15-2A RUBBER, CANOPY, HYD THUMB, 2 BKTS, 3,427 HRS ...CALL NEW HITACHI ZX35U-5 CAB AIR, 2 BKTS, HYD THUMB, LONG ARM, 179 HRS .... CALL 2005 HITACHI ZX75US-A 18" PADS, AIR, BLADE, 3,285 HRS............................. CALL 2015 HITACHI ZX75US-5B 18" PADS, BOR, BLADE, ONLY 1,471 HRS ...............SOON 2015 CAT 308E2 CR 18" BOR, AIR, BLADE,ONLY 118 HOURS, L. ARM, QUICK CHANGE HYDRAULIC THUMB...................................................................................... $104,900 2016 CAT 308E2 CR 18" BOR, AIR, BLADE, ONLY 700 HRS ................................ CALL 2018 CAT 308E2 CR 18" BOR, AIR, BLADE, RVC, ONLY 171 HRS ........................ CALL 2016 KOMATSU PC78US-10 18" BOR, L.ARM, Q/C HYD THUMB, ONLY 1,223 HRS ..... ................................................................................................................... FOR RENT 2014 CAT 311FL RR 20" PADS, BOLT ON RUBBER, ONLY 1,262 HRS ................. CALL 2018 HITACHI ZX120-6 20" PADS, AIR, ONLY 1,241 HOURS .............................. CALL (3) 2018 CAT 312F 20" PADS, BLADE, Q/C HYD THUMB ............................ FOR RENT 2017 CAT 313FL GC 20" PADS, BLADE, AUX HYDS, Q/C, HYD THUMB, 825 HRS ..CALL 2005 HITACHI ZX135US 20" PADS, AIR, DIG BKT, 7,983 HRS............................. CALL 2010 HITACHI ZX135US-3 20" PADS, AIR, ONLY 1,929 HOURS.......................... CALL 2012 HITACHI ZX135US-3 28" PADS, AIR ONLY 1,530 HRS ............................... CALL 2014 HITACHI ZX135US-3 20" PADS, AIR, Q/C, 2 BKTS, HYD THUMB, 1,571 HRS ....... ........................................................................................................................... CALL 2014 HITACHI ZX135US-5 24" PADS, AIR, 9'11" ARM, 2,618 HRS, Q/C, DIG BKT........ ............................................................................................................................CALL 2014 HITACHI ZX135US-5 20" PADS, AIR, 9'11" ARM, 3,600 HRS..................... CALL 2014 HITACHI ZX135US-5B 20" PADS (BOR), AUX PIPING, 2,135 HRS .............. SOON 2014 HITACHI ZX135US-5B 24" PADS, BLADE, ONLY 2,763 HRS ..................... SOON 2014 HITACHI ZX135US-5B 20" PADS, AIR, BLADE, ONLY 3,301 HOURS, Q/C, HYDRAULIC THUMB, DIG BKT, PAINTED ................................................................CALL 2015 HITACHI ZX135US-5 20" PADS, AIR, 3,822 HRS, GRAPPLE BUCKET.......... CALL 2015 HITACHI ZX135US-5B 28" PADS, BLADE, ONLY 2,250 HOURS, AUX HYDS .CALL 2014 HITACHI ZX135USK-5 20" PADS, Q/C, HYD THUMB, 2,918 HRS, C/W V105E HYDRAULIC BREAKER ................................................................................ FOR RENT 2016 HITACHI ZX135US-5B 20" PADS AIR, BLADE, ONLY 1,925 HRS ................ CALL 2019 HITACHI ZX135US-6 20" PADS, AIR, ONLY 580 HOURS........................... SOON (4) NEW DEERE 135G 28" PADS, AIR, BLADE, HYD THUMB 2 BUCKETS ..... FOR RENT NEW DEERE 135G 28" PADS, AIR, BLADE, HYD THUMB 2 BUCKETS, CABGUARD......... ....................................................................................................................FOR RENT 2013 CAT 314E LCR 28" PADS, DOZER BLADE, AUX HYDS, Q/C, 16,247 HRS.............. ....................................................................................................................... $54,900 2014 CAT 314E LCR 24" PADS BOR, Q/CHANGE HYD THUMB, ONLY 1024 HRS ........... ................................................................................................................... FOR RENT 2004 HITACHI ZX160LC 24" PAD, AIR, CAB GUARD, PRO LINK HYD THUMB, 8,960 HRS, HENDRIX PIN GRABBER, 36" DIG, 60" CLEAN UP............................................. $63,900 2016 HITACHI ZX180LC-6N 32" PADS, AIR, ONLY 2,610 HOURS, HYD THUMB, Q/CHANGE, DIG BKT ........................................................................................... CALL 2013 CAT 316E L 28" PADS, AIR, Q/C HYD THUMB, 2,342 HRS ................... $159,900 2014 HITACHI ZH200-5B 32" PADS, AIR, HYBRID MACHINE, ONLY 1,765 HRS, HYDRAULIC THUMB, QUICK CHANGE, DIG BKT ......................................................CALL 2014 HITACHI ZX210LC-5N 24" PADS, AIR, Q/C, HYD THUMB, ONLY 3,006 HRS .CALL 2006 HITACHI ZX225US-3 24" PADS, AIR, 7,596 HRS ....................................... CALL 2011 KOMATSU PC200LC-8 28" PADS, AIR, 18 METER SUPER LONG REACH BOOM, ONLY 2,343 HOURS, Q/C 32" .45M3 DIG, 60" SLOPING BKT ................... CALL 2018 KOMATSU PC200LC-8 32" PADS, A/C, Q/C, HYDRAULIC THUMB ....... FOR RENT 2017 HITACHI ZX200LC-6 32" PADS, AIR COND, ONLY 865 HOURS .................. SOON (2 )NEW HITACHI ZX200LC-5 24" PADS, AIR COND, BRAND NEW ............ FOR RENT 2018 HITACHI ZX200LC-5 24" PADS, A/C, Q/C, HYD THUMB, PLUMBED FOR HAMMER, GUARDED, 507 HRS ................................................................................... FOR RENT 2012 HITACHI ZX210LC-3 Q/C, HYD. THUMB, CAB GUARD, 6,675 HRS ...............CALL 2012 DEERE 225D LC 32" PADS, AIR, ONLY 4,792 HRS .................................... SOON 2017 DEERE 245G LC 32" PADS, 2 BKTS Q/C, HYDRAULIC THUMB 1,216 HRS ...CALL

Authorized Dealer

(6) DEERE 245G LC 32" PADS, 2 BKTS, Q/C, HYD THUMB, CABGUARD, 819 HRS ........ ....................................................................................................................FOR RENT (3) DEERE 245G LC-6 32" PADS, Q/C, PRO LINK HYD THUMB, 2 BKTS....... FOR RENT 2018 CAT 323 28" PADS, AUX HYDS, HEAD & FRONT CAB GUARDS, LIKE NEW COND, Q/C HYD THUMB, ONLY 974 HOURS, PRE EMISSIONS, NO REGEN NO DEF.CALL 2015 KOMATSU PC228USLC-10 32" PADS, AIR, PIN GRABBER Q/C, WRISTO BUCKET, HYD, THUMB, ONLY 3,308 HOURS ..................................................................... SOON 2006 CAT 325DL 32" PADS, AIR, Q/C, HYD THUMB, ONLY 5,862 HRS ................. CALL 2015 HITACHI ZX250LC-6N 32" PADS, Q/C HYD.THUMB, ONLY 1,583 HRS ........CALL 2012 HITACHI ZX290LC-5N 32" PADS, AIR, HYD THUMB, Q/C, 6,689 HRS .. $129,900 2012 HITACHI ZX350LC-5N 32" PADS, AIR, Q/C, PRO LINK THUMB, ONLY 5,818 HRS . ........................................................................................................................... CALL 2018 DEERE 345G LC 32" PADS, AIR, HYD THUMB, Q/C, 2 BKTS ............... FOR RENT NEW HITACHI ZX330LC 24" PADS, AIR, HYD THUMB, B/NEW.................... FOR RENT 2019 HITACHI ZX350LCK-6 24" PADS, AIR, XTRA CWT, ONLY 19.6 HRS.........FOR RENT 2014 CAT 336E L QUICK CHANGE, DIG BKT, ONLY 5,112 HRS ..................... $169,900 2013 KOMATSU PC360LC-10 32" PADS, AIR, Q/C HYD THUMB, CAGUARD, 4,632 HRS ................................................................................................................... CALL 2015 HITACHI ZX470LC-5B 24" PADS, AIR, ONLY 4,440 HRS, 2 BKTS Q/CHANGE ...... .............................................................................................................. RENT OR BUY

DOZERS

2005 KOMATSU D21A-8 6 WAY, CANOPY, ONLY 2,832 HRS............................... SOON 2014 KOMATSU D39PX-22 6 WAY, CAB AIR, ONLY 1,933 HRS, MS RIPPER (D5K SIZE) ....................................................................................................................FOR RENT 2015 CAT D6K2 XL 6 WAY, CAB AIR, MS RIPPER, ONLY 2,051 HRS ............. FOR RENT 2013 CAT D6T XW 6 WAY DOZER, MS RIPPER, ONLY 6,331HRS ......................... CALL 2014 KOMATSU D65PX-17 6 WAY DOZER, MR RIPPER, SWEEPS, ONLY 3,500 HRS..... ....................................................................................................................FOR RENT

LOADERS, SKID STEERS,BACKHOES

NEW YANMAR V4-7 CAB AIR, BOBTACH Q/C, .91 CU YARD BKT ....................... NEW 2018 KOMATSU WA200PZ-6 20.5R25 TIRES, AUX HYD, HYD Q/C BKT, R/C, 2,159 HRS, AMI 9' SWEEPER/Q/C FORKS/JIB TO FIT..................................... SALE OR RENT 2014 KOMATSU WA320-7 20.5R25 TIRES, HYD Q/C, R/C, RVC, 4,183 HRS ........ CALL 2014 CAT 924K 20.5R25 TIRES, HYD Q/C BKT, R/C, AUX HYDS, 3,004 HRS ........ CALL 2015 CAT 950K 23.5R TIRES, A/C, R/C, E/S, 4.32YD BKT, ONLY 3,060 HRS .FOR RENT 2017 KOMATSU WA380-8 23.5R TIRES, HYD Q/C, A/C, R/C, RVC, ONLY 2,027 HRS..... ....................................................................................................................FOR RENT 2015 KUBOTA SVL75-2 CAB AIR, JOYSTICK, HYD Q/C, 2,975 HRS ................ $49,900 2009 BOBCAT S70 CAB, Q/C BKT, ONLY 1,541 HRS ................................... FOR RENT 2012 BOBCAT S70 CAB, Q/C BKT, AUX HYD, 1,165 HRS ......................................CALL 2016 BOBCAT S70 CANOPY, 36" GP BKT, AUX HYDS , ONLY 516 HRS ........ FOR RENT 2015 BOBCAT S590 HYD Q/C, A/C CAB, 2 SPEED, 706 HRS ............................... CALL NEW BOBCAT S590 CAB AIR, STD CONTROLS, 68" BKT ............................ FOR RENT 2013 BOBCAT S650 2 SPEED, HI FLOW, HAND/FOOT, A/C CAB, ONLY 1,547 HRS ........ ....................................................................................................................FOR RENT 2012 BOBCAT S850 A/C CAB, 84" BKT, 2 SPEED, 2,548 HRS............................. CALL

GRADERS / COMPACTORS

1995 CAT 160H14R24 TIRES, CAT MS RIPPER, 18,339 HRS, SPECTRA PRECISION PRO GRADER CONTROL SYSTEM ...................................................................... SOON NEW CORNIVER CT40S 40" SMOOTH DRUM, KUBOTA ENG, FF TIRES 287 HRS ................................................................................................................... FOR RENT

NOVEMBER SPECIAL $50,900

$59,900

1999 KOMATSU CD60R-1 STEEL TRACKS, 360 DEGREE DUMPER, 7,160 HRS. NEW CORNIVER CT48S 48" SMOOTH DRUM, KUBOTA ENG, FF TIRES ....... FOR RENT (2) VOLVO SD25D 41" SMOOTH DRUM, CANOPY, 467 HRS - 1,300 HRS ..................... ............................................................................................................ SALE OR RENT 2004 ING. RAND SD45F 54" PADFOOT DRUM, DOZER, CUMMINS, ONLY 1,405 HR ..... ....................................................................................................................... $32,900 2004 ING. RAND SD45D TF 54" PADFOOT SHELL KIT DRUM, CANOPY, 806 HRS ....... ....................................................................................................................... $37,500 (3 )VOLVO SD45D 54" DRUM, CANOPY, ONLY 1,099 HRS........................... FOR RENT 2012 VOLVO SD70D 66" DRUM, CAB AIR, ONLY 2,528 HRS ....................... FOR RENT (3) VOLVO SD75 66" SHELL KIT, CAB AIR................................................... FOR RENT 2014 SAKAI SV540D 84" SMOOTH DRUM, CANOPY, ONLY 470 HRS ............. $84,900 (2) 2014 SAKAI SV540TF 84" SMOOTH DRUM/PADFOOT SHELL KIT, CAB AIR, 1,483 HRS ................................................................................................. FOR RENT

DUMP TRUCKS

2005 FRTLINER M2 106 CAT C7 190HP, 6 SPEED,10' DUMP BOX, 140,000 KMS CERTIFIED, JUICE BRAKES ................................................................................. CALL 2008 CANYCOM SC75 2,200LBS PAYLOAD, HONDA GAS, STRAIGHT DUMP ..... SOON 2018 CANYCOM SC75PD 2,200 LB PAYLOAD, 35" WIDE, 180 DEGREE DUMP ... CALL (2) CANYCOM SC75PD RUBBER, 2,200 LB PAYLOAD, 35" WIDE, 180 DEGREE DUMP ........................................................................................................ FOR RENT 2012 YANMAR C12R-B RUBBER TRACK DUMPER, 2,540LB PAYLOAD, 1,087 HRS ..SOON 2017 CANYCOM S25A RUBBER, CANOPY, 180 DEGREE SWIVEL DUMP, 467 HRS ........ ....................................................................................................................... $42,500 2019 CANYCOM S25A RUBBER, CANOPY, 180 DEGREE SWIVEL DUMP ...... FOR RENT (3) NEW YANMAR C30R-3R CANOPY, C/W SWIVEL DUMP, 5,513 LB PAYLOAD............ ....................................................................................................................FOR RENT 2018 YANMAR C50R RUBBER, CAB, SWIVEL DUMP, 8,300LBS MAX CAPACITY .......... ....................................................................................................................FOR RENT 2011 CAT 730 23.5R25TIRES, TAILGATE, ONLY 6,024 HRS ......................... FOR RENT 2012 VOLVO A30F 750/65R25 TIRES, RVC, HEATED, ONLY 6,017 HRS ............... CALL (5) KOMATSU HM300-5 23.5R TIRES, HTD BOX, BRAND NEW ................... FOR RENT

LIFTS & LIFT TRUCKS

2013 DOOSAN G25E5 4,600LB FORKLIFT, DUAL FUEL, SS,3 STAGE MAST .......... CALL 2018 GENIE GTH-5519 TELESCOPIC FORKLIFT, CAB, ROTATING CARRIAGE ......... FOR RENT 2007 CAT TL1055 10,000LB, 55', A/C CAB, TILT CARRIAGE, 5,180 HRS ......... $63,500 2011 SKYTRAK 10054 10K LB, 54' LIFT, CAB, FFT, 3,787 HRS ................... FOR RENT 2012 JLG G1055A 10,000LB, 55' LIFT, CAB, HYD LEVELING, 4,448 HRS ........ $94,900 NEW GENIE GS1930 19' ELECTRIC SCISSORLIFT......................................... FOR RENT 2008 GENIE GS-2032 20' LIFT, 32" WIDE, 511 HRS, ELECTRIC SCISSORLIFT ........... CALL 2010 GENIE GS2632 26' ELECTRIC SCISSORLIFT, REMOTE, PWR TO PLATFORM, 229 HRS ................................................................................................................ $14,900 2007 GENIE GS-2646 26' LIFT, 46" WIDE, 556 HRS, ELECTRIC SCISSORLIFT .......... CALL 2008 GENIE GS-2646 26' LIFT, 46" WIDE, 561 HRS, ELECTRIC SCISSORLIFT .......... CALL 2015 GENIE GS3369 RT 4WD, KUBOTA DIESEL, ONLY 682 HRS ................... FOR RENT 2018 GENIE GS3369 RT 4X4, KUBOTA DIESEL, OUTRIGGERS, B/NEW .......... FOR RENT 2013 GENIE Z30/20N SOLID NON MARKING TIRES, 4' JIB, ONLY 227 HOURS ................ ..................................................................................................................... FOR RENT 2001 GENIE Z45/25J DUAL FUEL, 4X4, JIB, 4,980 HRS ...................................... CALL 2011 GENIE Z45/25J 4X4, DIESEL, 5' JIB, FF TIRES, 3,920 HRS ..................... $33,900 (5) GENIE/JLG Z45/25J, 450AJ 4X4, DIESEL OR DUAL FUEL ...................... FOR RENT 2013 JLG 600AJ 4X4, DIESEL, PWR TO PLATFORM, FFT, 3,200 HRS ........... FOR RENT 2012 GENIE Z60/34 4X4, DIESEL, 3,250 HRS .................................................... SOON (3) GENIE Z60/34 4X4, PERKINS, 6' JIB, ONLY 1,571 HRS........................... FOR RENT 2011 GENIE S65 4X4, 65' STRAIGHT BOOM, DIESEL, 2,499 HRS ................ FOR RENT 2012 JLG 660SJ 4X4, 60' BOOM, 72" JIB, ONLY 2,400 HRS ...................... FOR RENT 2011 GENIE S85 4X4, 85' STRIAGHT BOOM, DEUTZ, ONLY 1,836 HRS ......... FOR RENT

WATER TRUCKS

2006 FORD F750 CUMMINS DIESEL ENGINE, 7 SPEED, HOSE REEL, SINGLE AXLE WATER TRUCK, VALEW TANK, 107,800 MILES ............................................... $43,900 2008 FREIGHTLINER M2 220HP CUMMINS, 5 SPEED, 3" PUMP, FRS SPRAY, UNUSED 2,000 GALLON WATER TANK ......................................................................... $64,900 2005 KENWORTH T300 UNUSED SMITH 2,500 GALLON TANK, F/S/REAR DISCHARGE 1,000 GPM PUMP, AIR RIDE, CUMMINS 8.3L, 9 SPEED, 125,000 MILES, SINGLE AXLE, CERTIFIED ......................................................................................................... CALL

TRAILTECH TRAILERS ETC

2013 CAT 314E LCR 28" PADS, DOZER BLADE, AUX HYDS, Q/C, 15,357 HRS.

NEW TRAILTECH L235HD-10 10' DUMP TRAILER, 2-3, 500 LB AXLES ................CALL NEW TRAILTECH CELL270-20 2- 7,000 LB AXLES, ELECTRIC BRAKES, 102" WIDE, 82.5" INSIDE FENDER, 20' DECK FLIP UP RAMPS ................................................CALL 2020 TRAILTECH L270-20 TILT 4' STATIONARY, 16' TILT DECK, 82.5" BETWEEN FENDERS, HYD CUSHION, TORFLEX AXLES.......................................................... CALL

www.pacificrimequipment.com | sales@prequip.com

Page 8

Supply Post · supplypost.com

$44,500

2002 Cat IT28G Tool Carrier, c/w 20.5R25 tires, Q/C, pallet forks, GP bkt.

$49,900

1999 Hitachi EX225 USR LC-5, c/w 2 Bkts, Q/C, thumb, new pins and bushings, end of stick, resealed contact valve and cylinders.

USED EQUIPMENT & MACHINERY FOR SALE OR RENT 2012 Deere 225DLC c/w 5,200 hrs, Pro Link hyd. thumb, Q/C, dig bkt. ................................................ $119,900 2001 Caterpillar 980G Loader, on board scale, 60% Bridgestone 29.5 x 25 tires, 6.0 yard GP bkt. w/B.O.E, 21,000hrs, trans RBU @16,000hrs, engine @ 13,000 hrs .......................................................................$95,000 2018 Hitachi ZX50U-5 cab, air, heat, hyd. thumb, bkts ..................................................................... $FOR RENT 1989 Cat D8N Crawler Dozer, EROPS, full u dozer w/tilt,rear MS ripper, 85% U/C except pads .......... $84,900 2005 Cat D6R XL c/w p.a.t. dozer, full guarding, diff. steer, rear ripper, A/C & heat, blade re-pinned & re-bushed, just out of shop, ready. For Sale or Rent ...........................................................................$159,900 2005 Hitachi ZX330LC, c/w Q/C, hyd thumb, dig bucket 11,000 hrs ..................................................... $89,900 2006 Hitachi ZX350 LC-3 EROPS new rails & sprockets, hyd Q/C, hyd thumb, full guarding .....................CALL (2) 2006 Volvo A30D Rock Trucks ..................................................................................... AVAILABLE FOR RENT 2002 Cat 980G Loader, new 29.5R25 tires, GP bucket w/BOE..............................................................$109,900 2007 Hitachi ZX135US-3 with blade, only 2,100 hrs ......................................................................... $FOR RENT Loader Tires 17.5 x 25 - 29.5 x 25 ..................................................................................................................$POR NEW Shipment of 29.5 R X 25 tires and 23.5 R25 L-4 ................................................................................. $POR

November 2020

Canada And Ontario Strengthening Farmers And Food Supply Through Skilled Trades Training The governments of Canada and Ontario have announced they are investing in several projects that will support labour and training needs in the farming sector, including committing more than $180,000

for the development of a new college program that will provide education and training in the latest agricultural equipment.

Through the Canadian Agricultural Partnership (the Partnership), the fed-

eral and provincial governments will assist Conestoga College in the creation, launch and delivery of a pilot program to expand the training opportunities for current farm sector employees and better prepare those interested in careers in agriculture to work on farms in key areas.

Students will learn Continued on page 9

ESCO AND LSW HAVE THE BLADES YOU NEED FOR SEVERE WEATHER CONDITIONS Full inventory available. ®

Carbide Blades

FlexPro™ Snow Plow

Grader Blades

★ JAW CRUSHER FOR RENT — CALL FOR AVAILABILITY ★ FOR RENT ONLY 1-800-663-5454 2012 Deere 225DLC Terex J1170 Jaw Crusher 2018 Hitachi ZX35U-5 2013 Hitachi ZX135USBL-3 2018 Hitachi ZX50U-5 (2) Volvo A30D

Dozer Blades

MACHINERY SALES & RENTALS • KELOWNA, B.C. PHONE: 250-769-5454 • FAX: 250-769-5005 continentalequipment.ca ALSO IN STOCK: ® Filters ® Cutting Edges ® Bucket Teeth ® Equipment Attachments ® OTR Loader & Rock Truck Tires

WHEELER EQUIPMENT LTD.

Specializing in building & servicing yarders!

2005 JOHN DEERE 800C, 20,500hrs ,c/w spare engine.

Asking 138,000 CAD. Make a great log barge, or aggregate barge machine. Possible barge access for pic up. Give a shout for details.

(2) WASHINGTON 108 1 decent, other parts machine.

Stu Wheeler 604-240-9239 or Fred Zayik 204-949-8715.

(2) MADILL 1800 CABS, new.

Call Stu Wheeler 604-240-9239 or Fred Zayik 204-949-8715.

www.esco.weir

WASHINGTON CABLE SYSTEMS 158 SKYLINE EXCAVATOR. 8 yard system. For more information: Mr. BEN VIPOND, 204-990-4914 | BVIPOND@CPBSHOP.COM MR. STU WHEELER STUWHEELER@SHAW.CA 604 240 9239

WE SUPPLY TEETH, SHANKS, CHAIN, RIGGING, WIRE ROPE OR CAN BUILD A COMPLETE BUCKET. Call us for your next project.

Truro, NS 902-895-4913

Copyright © 2020, ESCO Group LLC. All rights reserved.

• WASHINGTON YARDERS & HEAVY EQUIPMENT REPAIR • REMANUFACTURING & CUSTOM PARTS FABRICATION • RECYCLING EQUIPMENT & MATERIAL HANDLERS • MANUFACTURING SKYLINE EXCAVATORS AND DRAGLINE BUCKETS FOR THE AGGREGATE INDUSTRY

BIRDS HILL SAND & GRAVEL HAS FOR SALE:

VARIOUS CLUTCH AND BRAKE PARTS for Madill, Washington, Skagit. Call for pricing.

Fredericton, NB 506-458-5613

lswwearparts.com

(2) WASHINGTON 217 YARDERS. Running when parked. Were decent machines.

Call Stu Wheeler 604-240-9239 or Fred Zayik 204-949-8715.

MADILL 044, good shape, been parked for 4 years, $30,000 CAD.

Washington Yarders

CAT 330 EXCAVATOR/BACKSPAR MACHINE, Hi-Walker, 18,000 hours, rebuilt engine last spring, $50,000 CAD. Please call Stuey at 604-8411853 or Dale at 250-371-7047

SUPER 88 SWING YARDER We can re-manufacture your original Washington 88 into a Super 88MK II. Or a new Wheeler 88 - built from scratch and customized to your needs!

8790 River Rd, Delta, B.C. V4G 1B5 / (604) 882-9995 / info@wheelerequipment.com / www.wheelerequipment.com /

November 2020 Continued from page 8

skilled trades in high demand areas such as spraying and fertilizing operations, custom tillage and harvesting operations.

The project is one of several recently approved by the governments to help primary agriculture, food processing companies and food retailers to recruit and train workers who are critical in keeping the province’s essential food supply functioning.

“Access to skilled labour is critical on farms and in processing facilities 592 Lilac Cres., Campbell River, BC V9W 7G6

Supply Post · Our Readers Are Your Buyers and this pilot program will help farmers meet their labour needs while allowing more Canadians to obtain meaningful and challenging employment in the agricultural and agri-food sector,” said the Honourable Marie-Claude Bibeau, federal Minister of Agriculture and Agri-Food. “A skilled agricultural workforce will unlock the tremendous potential of our agri-food industry, and help our farmers and food processors to continue to drive our economy, create jobs and feed Canada and the world.”

“Helping to meet the labour and training needs of our agri-food sector is a priority for this government. Supporting those with a passion for a career in agriculture is key to our economy and ensures our food supply chain continues to produce healthy and nutritious food for Ontario families,” said the Honourable Ernie Hardeman, Ontario Minister of Agriculture, Food and Rural Affairs. “Our government is doing everything possible to ensure farmers both today and those in the future

have the training and skills necessary to operate their farm operations effectively.”

“Ontario has a diverse agriculture and food processing sector requiring a wide range of skilled labour,” said the Honourable Filomena Tassi, federal Minister of Labour. “We are pleased to invest now to support the food value chain for the future.”

“Agriculture is by far the biggest single industry in Brant and Brantford,” said Will Bouma, MPP for Brantford-Brant. “To see

Page 9 the Governments of Ontario and Canada come together to support the development of a new college program to train in the latest agricultural equipment can only strengthen our goal of food self-sufficiency in Ontario.”

Through a targeted intake under the Partnership’s Place to Grow: AgriFood Innovation Initiative, the governments have also recently committed up to $594,000 to projects to boost labour supply and training in the agri-food sector. In addition to the

Conestoga College program, the governments have approved: • $396,000 for the Ontario Federation of Agriculture to develop a comprehensive support system for businesses in the agriculture and food sector to target communities affected by workforce shortages in the agri-food sector due to COVID-19, including a job matching and labour recruiting service; • $198,000 for Food and Beverage Ontario to develop Continued on page 14

SARATOGA

VENTURES LTD. WE SPECIALIZE IN USED PARTS & ATTACHMENTS FOR THE LOGGING INDUSTRY!!

NICE TRY WINTER. NICE TRY.

EQUIPMENT FOR SALE: • 1999 Cat 545 Grapple Skidder, Machine has 13,081 Hrs., C/W 35.5 X 32 Tire size and has chains on all four tires, New front axle chains ......$34,500.

• 1979 Cat 14G Grader, Machine has 20.5 X 25 Tire size with chains on all six tires, Engine on this grader will need to be replaced or rebuilt.$30,000.

• 2006 Linkbelt 210 Hoe Drill, Machine has 12,200 Hrs. Coastal Drill & Compressor Drill pkg. was put on machine in 2016. There is 765 Hrs on Drill pkg., Hammer is a Atlas Copco 1238 w/ 350 Hrs on it. All the cylinders were done in 2016; when the machine was converted, Pump was replaced 1,500 Hrs. ago, Engine was replaced w/ a new crate engine.

Engine has less than 5 Hrs ............................................................$310,000.

• 1973 Pacific P16 Conventional Log Truck with 60 ton Pacific log trailer, Detroit 12V71N engine, Allison CLBT6061-6 electric shift trans, Clark BD91 drive axles........................................................................................$75,000.

• 1980 15ft Westcoast Winder with a Detroit 471 engine and a Hydro-drive.

Both the drive and the engine were replaced in 2017 .................$39,500.

• 1991 Madill 123 Grapple Yarder. This machine was Re-manufactured at T-Mar Industries in 2014, It was re-powered w/a 12.7L Detroit Series 60 and Allison transmission, New rotek, new cab and control system, Winch re-bearing and all gears inspected, Pumps and travel motors done, has been out working for the past two years and has 2,860 hrs on it since it came out of T-Mar ......................................................................... $850,000 • 2006 Komatsu PC200LL-7 Excavator w/ a high & wide U/C, 26’’ double bar pads, 2 bkts. & hyd. quick change, forestry style cab on a 17’’ riser, machine has 15,012 hrs .......................................................................................... $77,500 • 2007 Cat 330D Excavator w/ near new U/C, 28’’ double bar pads, 2 bkts. & hyd. quick change, machine has 8,800 hrs .................................. $75,000 • 2005 Cat 330C Log Loader w/ 60’’ Weldco Beales grapple, 28’’ double bar pads, machine has 23,840 hrs ....................................................... $92,500 • 2004 Cat 330C Log Loader w/ 60’’ T-Mar grapple, 28’’ double bar pads, machine has 25,800 hrs ................................................................. $87,000 • 2007 Linkbelt 240LX w/ 622C Waratah Processing head, 24’’ single bar pads, 15’’ riser under cab, machine has 22,600 hrs……. ............$129,000 • 1975 Cat 980B wheel Loader w/ log grapple, great yard machine!............ ......................................................................................................... $14,000 • 22ft Aluminum four passenger crew boat w/ a 250 hp Yamaha outboard & a tandem axle boat trailer……… ..............................$45,000.

DISMANTLING FOR PARTS:

• Pacific P16 Log Truck and Trailer • Excavator Bkts • Madill Parts: 009, 044, 075 (Rubber & Trk) • Clark Axle Components & Parts: BD 71,000 & 91,000 • Komatsu PC400-5

TOLL FREE 1-888-668-1611 Phone: 250-286-3211 • Fax: 250-286-3284

svl@saratogaventures.com | www.saratogaventures.com

While the cold may try to stop you, the Kubota SSV Series will keep you warm and comfortable in its all-weather cabin. Featuring a large assortment of attachments, the SSV is a versatile base for snow blowers, blades, graders, and much, much more.

All this adds up to a machine that’s prepared to work with you all season long.

kubota.ca |

Page 10

Supply Post · supplypost.com

Growing Alberta’s Forest Industry Alberta’s government is implementing the Forest Jobs Action Plan, helping to create opportunities for more investment and jobs in our forest industry.

The Government of Alberta is assigning more forest tenure through an open, competitive process that maximizes economic, environmental and com-

munity benefits, as well as benefits to local Indigenous communities.

“We know that forests need to be managed to remain healthy. Through our Forest Jobs Action Plan, we will keep forests healthy and help create jobs by reducing wildfire risk and pest infestations. This transparent, open competition will find the best fit for

HYDRAULIC BREAKERS

DESIGNED TO HANDLE THE TOUGHEST ROCK EXCAVATIONS AND LARGE CONCRETE DEMOLITION PROJECTS. 3 YR LIMITED WA R R A N T Y

the needs of the area and create jobs right here in Alberta,” said Devin Dreeshen, Minister of Agriculture and Forestry.

The new timber quotas will allocate timber that is part of the annual allowable cut (AAC) in forest management units, but has not yet been issued to a holder or operator.

There is currently about 51,000 cubic metres of unallocated deciduous AAC within Forest Management Unit G16, about 70 kilometres northwest of Grande Prairie. There is an additional 21,000 cubic metres of unallocated

November 2020 coniferous AAC within Forest Management Unit S22, about 300 kilometres north of Edmonton.

Allocating this tenure for sustainable timber harvesting and reforestation will support public safety, reducing the risk of wildfire and growing younger forests that are more resistant to disease and insect outbreaks, including mountain pine beetle.

Access to a secure wood fibre supply supports investment in the province’s forest sector and supports stable, good-paying jobs for Albertans.

Service Centres: Langley, • Chilliwack • Parksville

Quick facts • Alberta’s forest industry directly employs 19,500 people and supports more than 25,000 additional jobs in Alberta, contributing $1.7 billion in salaries and wages in 2019.

• Alberta owns all timber located on provincial public lands.

Under Alberta’s Forests Act, the right to harvest Crown timber is allocated to companies and individuals through forest tenures. b Source: Gov.ab.ca

www.rollinsmachinery.com E-mail: jeff@rollinsmachinery.com

Phone: 604-533-0048

DUAL SPEED IMPACT FREQUENCY ALLOWS THE HAMMER SPEED TO BE ADJUSTED FOR MAXIMUM PRODUCTIVITY.

DEMOS AVAILABLE NOW

Other products available contact us today!

Johnston Sweepers are available in: • Regenerative Air • Mechanical • Vacuum MAGNUM ATTACHMENTS WILL GIVE THE WORKING END OF YOUR MACHINERY SUPERIOR PERFORMANCE AND DURABILITY.

2214 9TH LINE, BRADFORD, ON L3Z 3T1

416.679.8752 | 1.877.640.2862 | FAX 416.679.8753

Service Centres:

Langley • Chilliwack • Chemainus • Kelowna

707G For more information, please contact: Allen Patterson | Tel: 403 318 5359 E-mail: apa@hydrema.com High Mobility | Low ground pressure | One step entry MultiTip | All-round visibility | Perfect for tight spaces Auto Body Return | Rental Friendly | Fuel Efficient

1-800-665-9060

CALL FOR A DEMO

November 2020

Supply Post · Our Readers Are Your Buyers

Page 11

682 Okanagan Ave. E., Penticton, BC, Canada

1-866-344-6480

cturchak@brutusbodies.com

YOUR TRUCK BODY BUILDING SPECIALISTS FREIGHTLINER M2 EXT CAB 4X4 W/12’ BODY, RELIANT 85, COBRA 11000 (UNIT 4107)

INTERNATIONAL CV515 CREW CAB 4X2 W/12’ RV TOW BODY (UNIT 4252)

PETERBILT REG CAB 4X4 W/12’ BODY, RELIANT 85, COBRA 11000 (UNIT 4357)

FREIGHTLINER REG CAB 4X2 W/12’ BODY, RELIANT 85, COBRA 8000 (UNIT 3675)

RAM 5500 REG CAB 4X4 W/11’ BODY, VMAC DTM70, COBRA 5500 (UNIT 3878)

INTERNATIONAL CV515 REG CAB 4X4 W/12’ BODY, ENPAK A60, COBRA 6600 (UNIT 4154)

RAM 5500 CREW CAB 4X4 W/11’ BODY, VMAC RAPTAIR MF, COBRA 5500 (UNIT 4074)

FORD F-550 SUPER CAB 4X4 W/11’ BODY, VMAC DTM70, COBRA 5500 (UNIT 4329)

FREIGHTLINER M2 EXT CAB 4X4 W/14’ BODY, RELIANT 85, COBRA 12000 (UNIT 4113)

MARANDA M140 & M170 CAB HEIGHT SLIP IN CANOPY

MARANDA X210 & X240 MID HEIGHT SLIP IN CANOPY

MARANDA V335 & V375 FULL HEIGHT SLIP IN CANOPY

www.brutusbodies.com

Page 12

Supply Post ¡ supplypost.com

November 2020

brandtused.ca What are you looking for?

Searching for used equipment just got a whole lot easier with advanced searches, currency conversion and monthly payment calculations. And every machine is backed by Brandt – the best-trained and committed after sales support team in the business.

brandtused.ca | 1-888-227-2638

November 2020

Supply Post · Our Readers Are Your Buyers

Page 13

2012 JOHN DEERE 460E 2017 CATERPILLAR 730 Unit #: 0U647327 Unit #: 0U400510

2017 BOMAG CR362 2009 JOHN DEERE 844K Unit #: CR311019 Unit #: 0U627684

2015 JOHN DEERE 310SK 2015 JOHN DEERE 772G Unit #: RM273270 Unit #: 0U669058

2016 CATERPILLAR 430F2 IT 2018 JOHN DEERE 333G Unit #: 3U000315 Unit #: 0U322554

2016 BOBCAT JOHN DEERE 2019 S650317G Unit #: #: 0U826433 0U296458 Unit

2014 JOHN NEW HOLLAND C232 2013 DEERE 210G LC Unit #: #: 0U521242 0U471504 Unit

2011 JOHN DEERE 329DT 2007 JOHN DEERE 710J Unit #: 0U194275 Unit #: 0U149559

2017 JOHN BOMAG BW206AD 2018 DEERE 848L Unit #: #: 0U686071 BNNN1022 Unit

2015 JOHN JOHN DEERE DEERE 2154D 750K 2013 Unit #: #: 0U210588 1U272755 Unit

2018 JOHN HITACHI ZX50U-5 2013 DEERE 2154D Unit #: #: 0U210516 0U287611 Unit

2017 JOHN JOHN DEERE DEERE 2154G 35G 2018 Unit #: #: 0U212096 0U280525 Unit

2016 JOHN JOHN DEERE DEERE 953K 210G LC 2013 Unit #: #: 0U233120 0U524011 Unit

2013 JOHN DEERE 953K 2015 JOHN DEERE 1050K Unit #: 0U233120 Unit #: 0U275831

2017 JOHN DEERE 2156G 2004 JOHN DEERE 250D Unit #: 0U216011 Unit #: 0U200854

2014 JOHN DEERE 848H 2013 KOMATSU WA480 Unit #: 1U658587 Unit #: 0U090986

2013 JOHN DEERE 324J 2007 DITCH WITCH 1820HE Unit #: 0U031363 Unit #: 0U000754

$166,600 $439,000

$48,000 $66,400

$150,000 $220,000

$184,900 $475,000

$399,900 $158,000

$32,900 $159,000

$74,000 $274,000

$395,000 $60,000

$85,000 $215,000

$45,000 $65,900

$58,000 $379,100

Your go-to choice for quality refurbished, used and aftermarket industrial equipment parts. brandt.ca/valueparts

FLEXIBLE OPTIONS FINANCING CUSTOMIZED, FIND OUT MORE 1-855-711-4545

$130,000 $115,000

$94,000 $73,000

$144,900 $370,000

$165,000 $184,900

$85,900 $14,000

Page 14

Supply Post · supplypost.com

operational stability of and complete a six-month Ontario’s food and bevmarketing campaign to erage processing sector build confidence with during COVID-19 chalfrontline food workers, lenges. support business conti“We greatly appreciate nuity for Ontario’s food the province’s investment and beverage processing in this important initiasector, and support the tive,” said John Tibbits,

Continued from page 9

President, Conestoga College Institute of Technology and Advanced Learning. “As well as addressing critical workforce needs in Ontario’s agriculture and food sector, the Agriculture Equipment Operator training initiative will

November 2020

provide opportunities for local residents to develop in-demand skills, advance their careers and contribute to the success and well-being of the community.”

Since June 2018, both the federal and provincial

For Total Lube Solutions,

GO WITH THE FLO! √ Autogreasers for Your Mobile Equipment √ Fluid Handling Equipment for Your Garage √ Our Mobile Workshops Come to You

WWW.FORESTECH.CA Contact Tim Lloyd : 250-703-3551

4335 BARGE TERMINAL RD. CAMPBELL RIVER, BC

1990 Caterpillar 980C, c/w: WBM M33 log grapple, third valve, ROPS cab, 29.5X25 tires, forestry guarding pkg w/ aux. counterweight.

WHEEL LOADER

LOG LOADERS

2 007 John Deere 844J Wheel Loader c/w: 2008 John Deere 3554LL, c/w: T-Mar WBM M33 log grapple, third valve, ROPS cab, grapple, heel rack, log loader front, west coast

ride control, 29.5 X 25 tires, forestry guarding elevated rear entry cab on 72” riser, forestry

$49,500 1996 Link-Belt 4300Q Processor c/w: 2000 Waratah HTH624 processing head (c/w: top saw, thumbnail rollers, butt saw, HTH Logrite measuring system w/ B&W screen), log loader front, elevated rear entry cab on 66” riser, forestry guarding pkg w/ aux. fuel tank, Cummins eng., high walker U/C w/ 28” double bar forestry pads.

PROCESSORS

EXCAVATORS

2002 Madill 3800C c/w: T-Mar grapple, 2008 Hitachi ZX350LC-3 c/w: Dig bkt, Q/C, hyd. heel rack, LL front, west coast elevated rear thumb, hoe front, cab guard, catwalks, aux. entry cab on riser, Series 60 engine, forestry counter weight, under guarding, standard U/C with guarding package, high walker u/c with 28” double bar pads .................................$149,500 32” TBP. 11.419 hours ............................. $79,500

CALL

$29,500 1977 Champion 720A c/w: 14:00-24TG tires, 12’ MB, cab, 4-53 engine, 14:00-24TG rear tires, set of four chains. Ready to work!

2012 Tigercat 880 c/w T-Mar 70” grapple, heel rack, log loader front, elevated rear entry cab on 60” riser, Cummins eng. forestry guarding pkg. highwalker undercarriage with 28” SBP.

1992 Caterpillar FB300B “Backspar” c/w: Dig MISCELLANEOUS bkt, Q/C, hyd. thumb, hoe front, single shive 2009 GMC C5500 Regular Cab 4X4 Service Truck c/w: Duramax diesel engine, auto, A/C, PW, PDL, IMT service body, IMT compressor, IMT 5,000 lb hydraulic crane w/ hyd outriggers, Miller Trailblazer welder, air bag suspension, 245/70R19.5 tires, tow package, 1983 Madill 044 Swing Yarder, c/w: Grapple, 153,xxx km, Certified...............................CALL lines, rigging, 60’ boom, cab on 36” riser, Quincy comp., Cat eng., mounted on Madill B-8 crawler carrier/ 24” TBP. Cat 330 backspar & Cat D7G dozer also available ...................................... CALL

2012 Tigercat 880 Processor c/w: 2011 Waratah HTH624C processing head equipped with top saw, backspar attachment, forestry cab, forestry thumbnail rollers, butt saw, log loader front, rear guarding package, highwalker U/C w/ 24” SBP. entry cab on 60” riser, Cummins eng., forestry Work orders.............................................. $27,500 guarding pkg., highwalker undercarriage with 28” YARDERS SBP ................................................................... CALL

guarding pkg w/ aux. fuel tank, high walker undercarriage w/ 28” DBP. Ready to work! work, r/b hyd. pump, good rubber! ........ $179,500 .............................................................$69,500 2004 Madill 3800C Processor c/w: 2016 Southstar package. 15,145 hrs. Recent trans. r/b, brake

WWW.FCLFINANCIAL.COM

VISIT OUR WEBSITE FOR OUR FULL INVENTORY:

FORESTECH EQUIPMENT

2004 John Deere 3554LL, c/w: T-Mar grapple, heel rack, LL front, west coast elevated rear entry cab on 72” riser, forestry guarding package w/ aux. fuel tank, high walker undercarriage w/ 28” DBP.

Quick Facts • Funding for these projects is provided under the Place to Grow: AgriFood Innovation Initiative – Addressing Labour Supply and Training Challenges project category.

• The Canadian Agri- Source: News.on.ca

Call Ron Corbeil 1-877-767-7600 | rcorbeil@fclfinancial.com

Mississauga: 1.800.668.5458 Winnipeg: 204.832.3040 sales@flocomponents.com www.flocomponents.com

$27,500

QS605 grapple processor, log loader front, west coast elevated rear entry cab, Series 60 eng., forestry guarding pkg, highwalker U/C w/ 28” SBP. Can be viewed working.......................................... $369,500

ROAD BUILDERS

MARINE EQUIPMENT

2004 John Deere 3554 c/w: Dig bkt, CU bkt, Jewell grapple & heel rack, Q/C, hyd. thumb, hoe front, forestry cab on 8” riser, forestry guarding pkg w/ aux. fuel tank, highwalker undercarriage w/ 28” DBP. ........................................... $94,500

1979 Argo 24’ Aluminum Crew Boat c/w: Bow lights, GPS/Chartplotter/sounder, Si-Tex radar, 2 X VHF radios,12 pass capacity, trim tabs, 2 X bilge

2002 Caterpillar 330BLL, c/w: WBM grapple, heel rack, log loader front, Caterpillar side pumps, Mercruiser V8 I/O power ...........$43,500 1981 Caterpillar 14G c/w: 14:00X25 tires, 14’ MB, entry cab on 48” riser, forestry guarding accumulators, cab, full set of chains. ....... $37,500 package w/ high cap tank, high walker 2001 Kobelco SK375MkIVRB c/w: Dig bkt, CU 160’ L x 44’ W 10’D 24 Man Steel Camp Barge undercarriage w/28” DBP. ...................$64,500 bkt, hyd. Q/C, hyd. thumb, aux. hyd (plumbed c/w 24 - 12’ x 9’ single person rooms, full kitchen ROCK DRILLS MOTOR GRADERS

Finning / Morgan Power Apparatus M-32F Tank Drill c/w: PR66 hammer, 22’ steel slide, 3800 square boom, ROPS cab, 800CFM comp., Cat 3306DI eng., alum. mag., mounted on M-32 or M-40 crawler carrier. 1 of 2 units... $37,500.00/Each

2000 Hitachi EX370LC-5LL c/w: Pierce grapple, heel rack, log loader front, west coast elevated rear entry cab on 72” riser, forestry guarding pkg w/ aux. fuel tank & aux. counterweight, high walker u/c w/ 30” DBP. Recent new tracks, boom foot R/B......$79,500

cultural Partnership is a five-year, $3 billion investment which includes $1 billion for federal activities and programs, and $2 billion in cost-shared programs delivered by provinces and territories on a 6040 basis.

• The Ontario agri-food sector supports more than 837,000 jobs in Ontario and contributes more than $47.5 billion each year to the province’s economy. b

EQUIPMENT FINANCING | FAST & EASY • Competitive Rate • All Types of Equipment • Lease or Finance • Sale Leaseback • Debt Restructuring • Auctions

Call Us for All Your On-Site Lubrication System Service Requirements

$74,500 $89,500

governments have committed support to more than 3,900 projects, through the Partnership, to help eligible Ontario farmers, processors, businesses and sector organizations innovate and grow.

for grapple & heel rack) high lift boom kit, ,walk-in freezer, refridgerator, full bakery, pantry, Mitsubishi eng., forestry guarding pkg w/ aux.

2 laundry rooms, rec, lunch, TV, storage, first fuel tank, highwalker undercarriage w/ 34” TBP. ................................................................$39,500 aid and dry rooms and office. 3 x generator sets, 3,000 gallon diesel, 2,100 gallon jet fuel, 1,100 1998 Kobelco SK350MkIVRB c/w: Dig bkt, CU bkt, hyd. Q/C, hyd thumb, forestry guarding pkg gallon gasoline and 2,200 gallon water below w/ aux. fuel tank, aux. hyd tank, Cummins eng., deck storage. Helicopter landing pad w/ fueling highwalker undercarriage w/30” DBP ..... $39,500 capabilities ............................................... $399,500

$19,500 1994 Caterpillar 330L c/w: 42” dig bkt, 64” CU bkt, Q/C, hyd. thumb, cab guard, catwalks, under guarding, std U/C w/ 28” DBP. 14,046 hours. ...............$19,500.

November 2020

Supply Post · Our Readers Are Your Buyers

Page 15

INLAND EQUIPMENT SALES www.inlandequipment.com | sales@inlandequipment.com | 150 Industrial Place, Penticton, B.C. Call Vic Kampe For Details | Ph: (250) 493-6791 | Fax: (250) 492-2762

FEATURED UNITS FOR SALE, RENT or RENT TO OWN

10’ 6” / 11’ 6” Q/C Angle Dozer Blades (IMAC/Balderson) .............. CALL FOR PRICE

2014 Cat 660S Watertruck, 21,600 Miles, Front, Rear, Side Spray, Hose Reel $135,000.

40 NEW EXCAVATORS TO CHOOSE FROM

EXCAVATORS/FORKLIFTS

2013 John Deere 130G, 2 Buckets, 5,985 hrs ..................................................... $89,000.

2014 Bobcat E85M Excavator, Thumb, A/C, Dozer, 1,319 Hrs ................................. Call.

2012 Bobcat E80 Excavator, Thumb, A/C, 1,377 Hrs. .......................................... Call.

2015 Bobcat E63 Excavator, Thumb, A/C Dozer, 972 Hours ................................ Call.

2014 Bobcat E55 Excavator, Thumb, A/C, Dozer, 1,363 Hours ............................. Call.

(2) 2015 Bobcat E35 Excavators, Thumb, A/C, Dozer, 545-295 Hours ................. Call.

(2) 2015 Bobcat E26 Excavators, Thumb, A/C, Dozer, 295-427 Hours ................. Call.

(2) Takeuchi TB16 Excavators .............. Call.

2013 Terex TC16 Excavator, 3,800 lbs, cab, 670 hrs................................................ Call.

CRAWLERS/WHEEL LOADERS/SKID STEERS

1981 Cat 966D Bucket Machine, 40% Tires .... ............................................................ Call.

1985 Cat 966D Bucket or Grapple ......... Call.

1978 Cat 966C, Forklift sideshift, fork adjust .. ............................................................ Call.

2014 Cat 950K Loader .......................... Call.

2015 Bobcat S630, 2sp, Hyd Q/C, A/C. 2112 hrs. .............................................. $38,500.

2012 Bobcat T750, Cab, 2,000 Hrs $46,000.

(2) 2005 Cat 246B Skid Steer, closed cab .... ........................................................... Call.

2004 Eljay RC5411 Cone..............$200,000.

Crushers For Sale 5 Surge Bins, 1 Jaw, 6 Cones & Screen Decks

FOR RENT OR SALE Sizes Available: ZX245, ZX345, ZX135, ZX300, ZX35, & ZX210 GRADERS & DOZERS

2004 Cat 140H 17.5x5 Tires New, 7,800 hrs ................................................... $110,000.

2004 John Deere 772CH, Ser. II, AWD, ripper........................................ $105,000.

2008 John Deere 872D, AWD, 14’ MB, A/C, ripper .............................................. $125,000.

2007 Cat 14H VHP, ripper, push block, 20.5 x 25 tires @ 60% (wing available) ..... Call.

BELLY DUMPS, LOW BEDS & TILT TRAILERS

1990 Peerless 50 Ton Tridem D/D Lowbed, 6’6” Neck Ext. 10 x 21 Deck, Beaver Tails, Detach ... ..............................................................$44,900.

CRUSHING EQUIPMENT 1997 Armadillo Jaw (tri axle), 32 -26" ..........

................................................. $100,000.

1999 MVP 350 Cone (rebuilt) .... $275,000.

2007 MVP 450 Cone ................... $350,000.

1995 Surge Bin (In and Out) ....................$25,000.

1995 Surge Bin (Out only)......................$20,000.

ROLLERS/PACKERS/CRUSHING & PAVING

2008 Dynapc 66” CA150 PD, 1950 hrs ......... ..................................................... $39,900.

1998 Dynapac 66” CA152 PD, 1500 hrs ....... ..................................................... $27,000.

2013 Bomag BW145 PDH 56”, Blade, 1050 hours..............................................$71,000 (2) 2007 IR SD45D-TF, 54", w/shell kits ...... .................................................... $62,000.

2007 Powerscreen 1800 Warrior, 2,587 hrs ........ .................................................. $150,000.

2013 Dynapac CA2500D, 640 Hrs $85,000.

2-2017 Dynapac 3500D 84” Drum, Cab, A/C, New .............................................$150,000.

TRUCKS

2005 Freightliner M2 S/A 2000 Gallon Water Truck Front, rear, side spray, 22,500 km ............................................... $49,000.

TRUCKS CONT’

2001 GMC 7500 2000 Gal Water Truck, Front, rear, side spray, hose reels, 31,000 miles ........ .......................................................... $39,000.

2004 FL FL70 200 Gallon Water Truck Front, rear spray, hose reel PTO Pump .......$45,900 2009 FL M2 106 400 Gallon Water Truck Front, rear, side spray, 95% Tires, 300 HP 9 sp trans .........................................................$97,500.

2014 Diamond C 7 Ton Tilt Trailer 22’x8’.$12,000.

2013 International 4300 Water Truck A/T, New Tank, Front, Rear, Side Spray .............$71,000.

2013 IHC 4400 S/A Water Truck, New tank, Front, Rear, Side Spray ....................$71,000.

2012 IHC 4300 S/A Water Truck, New Tank, Front, Rear, Side Spray ....................$69,000.

2009 IHC 4300 S/A Water Truck, A/T, New Tank, Front, Rear Side Spray .....................$69,000.

1984 P+H Omega 20 Ton Crane, 62’ Boom, 20.5x25 Tires ...................................$24,900.

1984 AM General 6x6 4000 gal Heated Tank Off Hwy truck, Low Miles ................$25,000.

2015 Western Star 4000 Gal Potable Water Truck, 500 HP, 18 Sp, 36,000 Km ..........Call.

1980 Grove RT740 40 Ton Crane, 4 section boom, 32’ jib, 4x4x4 ........................$39,000.

2014 Cat 660S Water Truck, 21,600 Miles, A/T, 20,000 F, 46,000 R ........................$149,000.

(2) 2014-13 Volvo A40G & F Rock Trucks, Tailgates 5,000 to 6,900 Hrs ..................Call.

2004 Ford F750, 2,000 Gallon Water Truck, Front & Rear Spray, Hose Reel .............................$47,500.

2005 Ford F750 Water Truck, 2,000 Gal., Front Rear Spray, Hyd. Brakes, 28,400 miles ..........$49,000.

FEATURED RENTAL UNITS ★ RENT TO OWN ★ NEW

NEW

Hitachi ZX245LCs

2013 Cat 924K, 1,910 hrs, auto lube, brofil clean air system, ride control, emerg. shut off. $110,000.

Articulated Rock Trucks

Hitachi ZX210LCs

RENTALS AVAILABLE New Hitachi ZX300LC · New Hitachi ZX135LCs · New ZX60, ZX50, ZX35 and ZX26 ·Volvo and Cat Rock Trucks · 2014 Cat 950K Wheel Loader

CALL FOR OTHER ADDITIONAL RENTAL UNITS

Page 16

Supply Post · supplypost.com

November 2020

BP Signs Gas Supply Agreement With ENN

VAN-ED ATTACHMENTS & MORE

Integrating international gas value chains to create lower carbon energy solutions for China, bp has signed a gas supply agreement with ENN

Group (ENN) to jointly support the growing energy needs of China’s southern Guangdong region.

Under the terms of the agreement, bp will provide

ENN with 300,000 tonnes per year of pipeline gas re-gasified from LNG for two years from 1 January 2021 in Guangdong.

The LNG will be received and re-gasified through the LNG receiving terminal of Guangdong Dapeng LNG Company Limited (GDLNG) where bp holds regasification capacity.

Continued on page 18

• SPECIALIZING IN NEW & USED UNDERCARRIAGE • PARTS • EQUIPMENT RENTALS & REPAIRS EQUIPMENT LTD. • TRACK PRESS FACILITY • IDLER REBUILDING

594 Chilcotin Road, Kamloops, BC V2H 1G5

EQUIPMENT FOR RENT OR SALE

• • • • • • • • • •

2018 Komatsu PC200LC-8, 3 bkts, Q/C, thumb, cabguard, catwalk, new mach.

2017 Komatsu PC350LC-8, 3 bkts, thumb, 2,200 hrs, new cond.

RENTED 2015 Komatsu PC170LC-10, 3 bkts, thumb, cabguard, like new cond., 1,600 hrs.

2014 Komatsu PC88MR-8, 2 bkts, hyd. Q/C & thumb, swing boom, 2,400 hrs.

2016 Hitachi ZX85 USB-5, 2 bkts, hyd. thumb, swing boom and blade, exc. cond 2014 Komatsu WA270-7, 3 yd. bkt. forks/pipe grapple, exc. cond.

Dressta TD10M Crawler, 6 way, blade, cab, A/C, 1,225 hrs, like new cond.

2014 Hamm H13iX, 84” smoothdrum packer w/cab, A/C, low hrs, exc. cond.

2012 Hamm 3412, 84” smoothdrum packer w/shell kit,RENTED cab, A/C, exc. cond.

2014 Hamm 3307, 66” smoothdrum packer w/shell kit, cab, A/C, exc. cond.

FOR RENT

2012 Komatsu D65EX-17, sigma blade, ripper & forestry guard., new U/C, plumbed for GPS, exc. cond.

Own or Rent

• Hammers • Crushers Crusher Buckets • Screeners • Demo Grabs • Compactors • Blowers & Dust Suppression

1-877-255-9293 · 604-888-9020 · www.vanedequipment.com

Allu is the world market leader in Screener Crusher Buckets.

New and Used Buckets Sales and Rentals Replacement Parts in stock

FOR SALE

2008 Hamm 3307, 66" smooth drum packer w/shell kit, cab, A/C, exc. cond.

HUGE INVENTORY OF USED UNDERCARRIAGE • • • • • • • •

Cat 330 TGA’s 28”, 2 bar pads on new rails ZX350/PC360 New Take-off Track Groups, 32” 3 bar Deere 2154 TGA’s 28” 2 bar on new rails ZX200LC/PC200LC TGA, 28” 2 Bar on new rails ZX350, ZX450 bottom rollers ZX200 (Rebuilt) Track Adj. Assembly Deere 2054 (Good Used) Final Drive Assembly T.Cat 870 / PC400 / Deere 959, track adj. assy. rebuilt

Phone: (250) 374-5054

1992 - 2020

Email: traktech@telus.net

EVES: Regan Zurowski (250) 371-1444 • Chad Zurowski (250)371-7535

For photos and more listings visit www.traktech.ca

PROUD DEALER OF:

ATTACHMENTS & EQUIPMENT SALES AND RENTALS NEW & USED PARTS CALL US TODAY! 1-844-802-4490

www.arrowwest.com

FMS attachments meet or exceed the competition in quality, fit and finish with a one year warranty on materials and workmanship.

November 2020

Supply Post · Our Readers Are Your Buyers

Prebooking Of Volvo CE’s Electric Machines Expanded Seven additional European nations join the list of countries where Volvo Construction Equipment (Volvo CE) customers can prebook one of the new electric compact machines via an online portal.

From October 14th customers in Sweden, Finland, Denmark, Belgium, Luxemburg, Austria, and

Switzerland will join other European countries and North America in being able to reserve a place in the production queue for the new ECR25 Electric compact excavator and L25 Electric compact wheel loader. With zero exhaust emissions and low noise levels and vibrations, these machines

5425 Production Blvd., Surrey, BC, V3S 8P6

Phone 604.530.5758 Fax 604.530.3554

Toll Free 1.888.530.5444 Focused on Parts for John Deere & Hitachi Late Model Excavators

NOW WRECKING JD870G LC

NOW WRECKING (2) ZX200LC-3s

Components · Cylinders · Cabs · Engines Undercarriage · Booms · Sticks · Linkage www.langleyexcavator.com parts@langleyexcavator.com

are the perfect choice for inner-city jobsites or any sensitive work environment. They provide lower maintenance levels, improved operator comfort and the ability to meet stringent environmental and noise regulations.

“The online pre-booking tool is a new approach which targets the early adopters of electric machines and identifies new customer segments. We are now making this platform available to an even wider customer base,” explains Carl Slotte, Head of Sales Region Europe, Volvo CE. “One of our main priorities is the customer experience and we want to stay up-to-date with new technologies that will streamline our processes and aid our customers and sales teams. We look forward to hearing what our customers think.”

Expanding The Customer Base By registering on the prebooking tool, customers will be able to reserve a place in the production queue for the electric machines. After this, customers will then be informed that they have been cleared to place an actual order for the machines. The first deliveries of the electric compact machines to customers in these countries will commence at the beginning of 2021.

The online portal has been conceived to expand the opportunities for customers to buy one of these machines and to broaden the way these machines are used by customers. It is being managed in collaboration with local dealers.

Warranty With A Customer Focus As electric machines will be a new experience for many customers Volvo will provide 100% peace of mind by providing two years standard warranty on the complete machine, including Services and the use of genuine Volvo parts provided by the local Volvo dealer as standard. In addition, a total of five years coverage on electronics and batteries is also included as standard if the customer signs up for a Service Agreement with a Volvo CE dealer. b Source: Volvo

Page 17

HEAVY EQUIPMENT PARTS SPECIALISTS

CABS, CABS, CABS! Our experienced cab rebuild team is able to breathe new life into used or damaged cabs. Rebuilt cabs are recertified to OEM spec, FOPS/ROPS. We have an extensive inventory!

WE SHIP ACROSS NORTH AMERICA

1.855.285.1115 SALES@BRIKERS.COM

Page 18

Supply Post · supplypost.com

(250) 564-7226

GET READY FOR THE SNOW WINTER SPECIALS

MOTOR GRADERS Snow Blade 140H/140M Hyd. Lift & Angle WBM........................... $15,000 Snow Blade 140H/140M-Hyd. Lift No Angle WBM ........................ $13,500 Snow Blade 140M, 160M, 14M M/Angle 11’Cat...*New* .............. $11,000 Snow Blade 140M, 160M Frt/Nose Mnt No Angle 9’ ....................... $6,000 Snow Blade Champion/Volvo Frt. Nose Mnt No Angle 9’ ................. $6,000 Snow Wing -140M/160M - WBM ripper mnt….*New* ................. $12,500 Snow Wing - 140M - WBM Masted ................................................ $7,500 SKIDSTEER Blade Snow - S590 Skidsteer Hydraulic angle 96” ......................... $4,500 Snow Blade - S590 Skidsteer fork 6’- 8’ Extendable Plow.............. $1,650 Bucket - HD LowPro Skidsteer 72” edge…...*New* ....................... $2,025 Snow Bucket - HV Skidsteer 96” HLA SBSN96 ............................... $1,550 WHEEL LOADERS Snow Blade - 930K/938K WBM 12 ft. - Fusion H/Angle ................ $16,000 Snow Blade - 930K/938K EFI H/Ang. Fusion, *New* 12’ ............... $15,000 Snow Blade - 930K, 938K, 950M-H/Ang Fusion Q/C 10’................. $8,500 Snow Blade - 950 WBM Manual Angle Q/A 11’ (3 way) .................. $8,500 Snow Blade - fits on Log Grapple 14’ ............................................. $1,500 Snow Blade - 950G - Slip on 10.5’................................................. $2,500 Snow Blade - 744H 11’ WBM Manual Angle Q/A ............................ $6,000 Snow Bucket - 966D/E/F - Cat 126” .............................................. $6,500

(250) 564-7226

Prince George BC

www.banningequipment.com

November 2020

Gaining Job Experience In Invasive Species Management Workers in Williams Lake, Ashcroft and Salmon Arm who were affected by mill curtailments will have the opportunity to gain skills and work in invasive species management and awareness.

The Invasive Species Council of BC (ISCBC) will receive over $550,000 from the Province’s Community and Employer Partnerships program (CEP) to provide on-site work experience to at least nine people in Williams Lake, Ashcroft and Salmon Arm. The ISCBC is a non-profit society that works to prevent the spread of invasive species in B.C. The project is designed to train participants in invasive species identification, management and monitoring. It will also train for rehabilitation and site restoration, including reseeding and invasive plant management. The project runs from July 2020 to March 2021.

“Workers affected by mill curtailments have a lot

Continued from page 16

of transferable skills and deserve the opportunity to put them to use,” said Shane Simpson, Minister of Social Development and Poverty Reduction. “This invasive species project is a great opportunity to provide important and meaningful work for people who need it, while reducing the spread and impact of invasive species in B.C.” The participants will complete a minimum of 150 site visits combined in Ashcroft, Salmon Arm and Williams Lake to increase protection of extensive agricultural and natural lands and aquatic systems from over 40 invasive species.

Program participants will also be involved in presentations to increase awareness and education on invasive species in outreach events throughout the communities.

“The ISCBC works with many partners to reduce the impact of invasive species and increase awareness about healthy land-

Warning: Giant hogweed stem hairs and leaves contain a clear, highly toxic sap that, when in contact with the skin, can cause burns, blisters and scarring. WorkSafe BC has issued a Toxic Plant Warning for Giant Hogweed that requires workers to wear heavy, water-resistant gloves and water-resistant coveralls that completely covers skin while handling the plants. Eye protection is also recommended. scapes,” said Gail Wallin, executive director, ISCBC. “Providing much-needed practical skills and experience for people who used to work in the forestry sector and in rural communities is a natural fit with what the ISCBC does and provides individuals with the chance to access key work opportunities.” b Source: Gov.bc.ca

Dev Sanyal, executive vice president of bp gas & low carbon energy, said: “Our strategy is to integrate energy value chains and, with this transaction, we have created an innovative model that integrates upstream gas resources, transportation and trading, into downstream markets in China.

This is the first time an international energy company will re-gasify LNG through a Chinese terminal and also directly supply gas to customers. We look forward to further cooperating with ENN and contributing to China’s ever-growing energy demand.”

Wang Yusuo, chairman of ENN Group, said: “Today’s cooperation will enable ENN to provide better resources and services to our customers. It will also empower the energy industrial reform and development in China.

Looking into the future, bp has announced its respected ‘Net Zero’ ambitions. ENN is also dedicated to building a modern energy system by adopting digital technologies.

Continued on page 20

QUALITY AFTERMARKET PARTS FOR ALL MAKES ALL MODELS

HYDRAULIC CYLINDER (STICK)

YOUR UNDERCARRIAGE EXPERTS!

HYDRAULIC CYLINDER (BOOM) BOOM

STICK

CAB

HYDRAULIC CYLINDER (BUCKET)

ENGINE (DYNOMOMETER TESTED)

MAIN CONTROL VALVE ATTACHMENTS MAIN HYDRAULIC PUMP

LINKAGE

SWING DRIVE

SWING RING TRAVEL MOTOR SPROCKET

BUCKET

FINAL DRIVE

YOUR WEAR PARTS EXPERTS!

CAB BODY FRONT TRACK IDLER SPRING

BOTTOM ROLLERS TRACK GROUPS

TORONTO 1-800-268-0679 | LONDON 1-800-959-5516| OTTAWA 1-800-463-7011| SUDBURY 1-800-334-5154 EDMONTON 1-800-319-7787| CALGARY 1-403-998-8956 | VANCOUVER 1-800-661-1157 | SPARWOOD 1-250-425-7018 QUEBEC CITY 1-888-609-5369 | MONTREAL 1-800-567-8722

www.essltd.com

SINCE 1946

CONNECT WITH US

November 2020

Supply Post · Our Readers Are Your Buyers

Page 19

ALL MODE LS IN STOC K!

KAMLOOPS Phone: 877-372-2855 Fax: 250-374-2844

PRINCE GEORGE Phone: 877-561-2456 Fax: 250-562-6353

FORT ST. JOHN Phone: 250-787-6791 borsetti@woodlandequip.com

CRANBROOK Phone: 250-489-6131 Cell: 250-919-2235

VERNON Phone: 877-542-2280 Fax: 250-542-2674

CAMPBELL RIVER Phone: 250-286-0950 Fax: 250-286-0960

Page 20 Continued from page 18

These visions to better build our planet, will need support from all aspects.

It’s a great beginning. We hope to deepen cooperation with innovative outcomes, together contributing to the development of

Supply Post · supplypost.com global clean energy.”

According to bp’s 2020 Statistical Review of World Energy, global natural gas consumption grew by 2% in 2019, with a 54 billion cubic metres increase in LNG exports.

The strong growth was

boosted by China, where the country’s LNG imports rose by 11.3 billion cubic metres, making it the biggest increase in a single country.

“As China progresses the coal to gas switch and advances the energy

transition, bp is committed to being a trusted and valued partner, bringing smart and low carbon solutions to contribute to a net zero future,” added Simon Yang, bp China president and bp senior vice president, regions, cities

Current stock for motor graders Parts available for all Deere models and generations as well as Caterpillar 16M and 24M!

Refurbished:

Used:

Aftermarket:

Circle drive gearboxes, HFWD hubs, transfer drop boxes, & more...

Rims, circle assemblies, sheet metal, & more...

Moldboards, cab glass, steps, & more...

November 2020 & solutions for China.

To date, bp is the first international energy company to invest in an operating LNG terminal in China. GDLNG, which bp has a 30% stake in, is China’s first pilot LNG import and regasification terminal. Dongguan ENN is an important customer of GDLNG, cooperating for more than ten years. For the past decade, GDLNG has delivered approximately 50% of the accumulative gas consumption to its customers in Guangdong region, making it

one of the most utilized terminals in China.

Zheng Hongtao, senior vice president of ENN Group gas business, said: “The cooperation has enriched gas supply in the Guangdong region, providing support to the development of ENN’s gas business. Meanwhile, the innovative business model of LNG import, processing and transportation, sets a good example for China’s LNG industrial market reform.” b Source: BP

“attachment specialists”

780-962-8586 ATTACHMENTS BLADES angle, straight, & U for all sizes RIPPERS single or multishank for all sizes

E-mail: usedparts@brandt.ca Inventory: brandt.ca/ValueParts

1-877-685-4886

WINCHES rebuilt, complete for all sizes

EMAIL: CRAWLERSALES@TELUS.NET FAX: 780-962-9465 Edmonton, AB

PARTS NEW, USED & REBUILT PARTS & COMPONENTS

KOMATSU 100 units dismantled CATERPILLAR 15 units dismantled CARCO - PACCAR 75 winches dismantled ALLIED - HYSTER 75 winches dismantled

Visit LiuGongNA.com

LiuGong has developed a full fleet of construction equipment that has been proven on jobsites from around the world.

We start with intuitive design and world class componentry, from Cummins® and Yanmar® engines to ZF® transmissions and axles.

We load the machines with standard features our competitors charge thousands for. Then we back those machines with the industry’s most comprehensive total coverage warranty and a growing local service network.

We have passed tests from Beijing to Buenos Aires, from Krakow to Katmandu, and are ready to be put to the test in North America.

For interest in the machines or being a part of our growing Dealer network, visit us at LiuGongNA.com.

November 2020

Supply Post · Our Readers Are Your Buyers

CCA Launches Talent Fits Here Campaign

a career of first choice, including those who graduate from science, technology, engineering and math (STEM) programs,” says Van Buren.

While conceived prior to the COVID-19 pandemic, the campaign is even more meaningful as our industry is positioned to absorb some of those who have been displaced from harder-hit sectors. With our strong safety culture, our construction industry has demonstrated its resilience to work in all kinds of conditions.

Visit talentfitshere.ca for more information and to view our real-life stories.

ness campaign designed to shift some of the traditional perceptions around working in construction by showcasing a collection of stories and experiences from real people working in different roles, on different projects and from different backgrounds – all within the diverse field of construction.

“One significant opportunity we have identified is for individuals from traditionally under-represented segments, such as women, About CCA youth, Indigenous and Across Canada, CCA new Canadians, to view represents more than working in the industry as 20,000 member firms drawn from 63 local and provincial integrated partner associations. CCA gives voice to the public policy, MCCloskey J45 45 X 27 JAW CRUSHER legal and standards development goals of contractors, suppliers and allied business professionals working in, or with, Canada’s institutional, comLangley, BC Tel: 604-866-0482 mercial and industrial (ICI) construction industry. b

The Canadian Construction Association (CCA) has launched Talent Fits Here, a campaign designed to encourage more Canadians to consider a career in construction.

“For the first time in decades, the industry has more projects than people,” says Mary Van Buren, CCA president. “And our industry is not alone – there is competition for talent across sectors due to shifting demographics and baby boomer retirements, and it is fierce.”

Talent Fits Here is a national public aware-

FOR RENT

NORSTONE EXCAVATING

Source: CCA

Page 21

CEC Canadian Equipment Company Ltd.

Edmonton, AB | 833-756-1149

AVAILABLE FOR SALE HYDRAULIC EXCAVATORS

MOTOR SCRAPERS

2012 Hitachi ZX470LC-5, 2 Available ���POR 2012 Hitachi ZX350LC-5, Thumb ���������POR 2011 Komatsu PC308 ��������������������������POR 2006 Hitachi ZX200LC, Thumb�������������POR 2002 Hitachi EX750-5��������������������������POR

CRAWLER TRACTORS 1991 Cat D9N, Ripper, U-Blade ������������POR 1997 Cat D7R LGP, Ripper, Angle Dozer, Fully Guarded ��������������������������������������POR 1998 Cat D7R, Ripper, Angle or Semi-U Blade ���������������������������������������������������POR 2011 Cat D6K LGP, Ripper, 6-Way Blade ������������������������������������������������������������POR 2007 Cat D6R XW, Ripper, 6-Way Blade, Fully Guarded ��������������������������������������POR 2005 Cat D5N LGP, Winch, 6-Way Blade ������������������������������������������������������������POR

ROCK TRUCK 2014 Cat 740B, 5 Available ������������������POR 2007 Cat 740, 2 Available ��������������������POR 2007 Cat 730, 3 Available ��������������������POR 2002 Cat 771D Haul Truck �������������������POR

Cat 637D, 6 Available���������������������������POR Cat 631D, 2 Available���������������������������POR Cat 627E, 2 Available ���������������������������POR Cat 627F, 3 Available����������������������������POR Cat 621E, 3 Available ���������������������������POR Cat 621F, 4 Available����������������������������POR

MOTOR GRADER 2011 Cat 160M, Ripper ������������������������POR 2011 Cat 160M AWD, Ripper����������������POR 2004 Cat 140H, Ripper, Wing ���������������POR

FUEL/TANK TRUCKS 2004 International, T/A, 18,000l Fuel Tank ������������������������������������������������������������POR 2009 Sterling, S/A 9,000L Fuel Tank ����POR 2009 Freightliner, TRI/A, 23,000L, Tank Truck ���������������������������������������������������POR

COMPACTORS 2004 Cat 563e Padfoot, 2 Available �����POR 2001 SuperPac 8410, 2 Available ��������POR

Unreserved public equipment auctions

Equipment financing by equipment experts.

1 of 10 – 2019 Freightliner PT126SLP Cascadia & 1 of 12 – 2019 Stoughton 53 Ft Eastern Canada Transportation Event

Case IH 485 West Canada Timed Auction Only Event

2017 John Deere S670 | Chatham-Kent

1 of 7 – Caterpillar D7R XR Series II Grande Prairie

2 of 10 – Caterpillar D8K w/Midwestern 583 Grande Prairie

1 of 3 – 2017 Caterpillar 336FL Grande Prairie

2013 John Deere 772G | Grande Prairie

2018 Massey Ferguson 4710 | Chatham-Kent

46,978+ items in 115+ auctions including Eastern Canada Transportation Event Nov 3 Canada West TAL Auction Nov 4 Chatham-Kent, ON Nov 4 Grande Prairie, AB Nov 23–25

Lethbridge, AB Toronto, ON Edmonton, AB Saskatoon, SK

IMPORTANT MESSAGE: Due to COVID-19, all of our auctions are now online bidding only.

For the most up-to-date information visit rbauction.com/covid-19

Dec 1–2 Dec 2–4 Dec 7–8 Dec 9

Online bidding information ▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!

Auction Company License #303043, MV Dealer #10539, Auction Company License #309645, Auction Company License #309646, MV Dealer No. 4585592, Licence de commerçant 69767, Dealer License 69767

Financing & leasing

Up to 100% financing, with no money down.

More items added daily Call about selling: 1.800.211.3983

See complete listings at rbauction.com

Page 22

Supply Post · supplypost.com

November 2020

Authorized Doosan Dealers

SOLD NEAR YOU. ALBERTA

Your local Doosan® dealer is your source for sales, parts and service.

NEW BRUNSWICK

HARTINGTON EQUIPMENT

780-875-2339 doosandealers.com/Lloydminster

PAUL EQUIPMENT AND SONS

506-826-3289 doosandealers.com/Balmoral

613-372-2744 doosandealers.com/Hartington

DOOSAN OF THE PEACE

506-449-3289 doosandealers.com/Fredericton

705-268-7600 doosandealers.com/Timmins

ONTARIO

STRATTON EQUIPMENT COMPANY

BROWN’S INDUSTRIAL SALES

780-538-0791 doosandealers.com/Grande-Prairie

BRITISH COLUMBIA

DOOSAN OF THE PEACE

250-785-1197 doosandealers.com/Fort-St.-John

WESTERRA EQUIPMENT

604-850-7313 doosandealers.com/Abbotsford 250-314-3600 doosandealers.com/Kamloops 250-716-0443 doosandealers.com/Nanaimo

WILLIAMS MACHINERY

250-563-0181 doosandealers.com/Prince-George

BOBCAT OF HAMILTON LTD.

905-643-3177 doosandealers.com/Stoney-Creek

C G EQUIPMENT

519-826-0550 doosandealers.com/Guelph

807-483-7777 doosandealers.com/Stratton

NORTHWEST TERRITORIES

EASTROCK EQUIPMENT INC.

613-737-3963 doosandealers.com/Ottawa

G F PRESTON SALES & SERVICE

705-384-5368 doosandealers.com/Sundridge

204-255-4772 doosandealers.com/Springfield-MB

SASKATCHEWAN

BOBCAT OF REGINA, LTD.

306-347-7600 doosandealers.com/Regina

EARTHWORKS EQUIPMENT CORPORATION

RON’S AUTO SERVICE LTD.

306-931-7880 doosandealers.com/Saskatoon

QUEBEC

DOOSAN OF WHITEHORSE

867-766-6025 doosandealers.com/Yellowknife

519-236-4934 doosandealers.com/Zurich

Learn more at doosanequipment.com

READYQUIP SALES & SERVICE LTD.

MANITOBA

AGCON EQUIPMENT

ÉQUIPEMENTS PLANNORD BELOEIL

YUKON

867-633-4426 doosandealers.com/Whitehorse

450-464-8000 doosandealers.com/fr/Beloeil

SAINT-AUGUSTIN-DE-DESMAURES

418-878-4007 doosandealers.com/fr/St.-Augustin-de-Desmaures

Doosan® and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. © ���� Doosan Infracore North America, LLC. All rights reserved.

November 2020

Supply Post · Our Readers Are Your Buyers

SUPPLY POST E-NEWS QUICK FACTS • 7,000+ subscribers from across Canada • 24 scheduled newsletters per year • Cover Feature and Classic Feature listing spaces available • Banner spaces available

FEATURED LISTINGS Show off your best trucks or equipment to qualified buyers across Canada. Space is combined with print front covers, supplypost.com and our social media platforms.

Exposure to over 50,000 industry professionals. Call today! 1-800-663-4802

DIGITAL EDITIONS GET THE PAPER FIRST, MAKE THE DEAL FIRST! The Digital Edition is available in our E-News the day after it is sent to print.

THE LATEST NEWS We feature the latest news from logging, trucking and roadbuilding along with new product releases and much more!

Have an announcement or job story?

Send it to editorial@supplypost.com

BANNER ADS Brand your business with quality banner space. 7000+ subscribers.

Space available now. Pre-book space throughout the year.

Call today! 1-800-663-4802

SUBSCRIBE & FIND THAT DEAL FIRST! www.supplypost.com/e-news

Page 23

Page 24

Supply Post · supplypost.com

$119,400

$53,950

$189,900

21E10036 - Langley 2019 CASE S90SN WT 1,364 hrs

$29,900

15E3276 - Langley 2016 CASE CX250D 521 hrs

$79,500

2E411 - Penticton 2014 CASE SV250 4,691 hrs

21E10017 - Langley 2011 CASE 580SN 4 8,837 hrs

$238,800

15E3227 - Langley 2013 CASE 580SN 4 8,565 hrs

15E3228 - Langley 2016 CASE 921F 5,483 hrs

$53,550

November 2020

$60,000

15E3262 - Langley 2013 CASE 580SN 4 8,284 hrs

21E10026 - Penticton 2012 CASE 580SN 4 4,016 hrs

Inland is donating

$250

per unit sold of new CASE Construction Equipment and matching up to an additional $10,000 to benefit RMHC.

Both you and the kids can win!

Own a compact CASE machine* for as low as

0%/60 MONTHS*

with

Plus win the supercar experience of a lifetime for you and a friend!

$0 DOWN On approved credit.

Offer applies to new CASE Compact Track Loaders, Skid Steer Loaders, and Mini Excavators.

Visit inland-group.com/CharityDRIVE for details

Brandon 204-728-6681 Estevan 306-637-2121

Fort St. John 250-785-6105

Regina 306-569-9021

Burnaby 604-291-6431 Kamloops 250-374-4406

Saskatoon 306-931-1911

Campbell River 250-287-8878 Kelowna 250-769-2933

Swift Current 306-778-2390

Castlegar 250-365-2807 Langley 604-607-0300

Terrace 250-635-2292

Cranbrook 250-426-6205 Nanaimo 250-758-5288

Vernon 250-545-4424

INLAND-GROUP.COM

Dawson Creek (Parts) 250-784-0934 Penticton 250-492-3939

Whitehorse 867-668-2127

Delta (Parts) 604-952-1280

Prince George 250-562-8171

Williams Lake 250-392-7101

Quesnel 250-992-7256

Winnipeg 204-694-3874

CANADA’S #1 HEAVY EQUIPMENT & TRUCK NEWSPAPER

SECTION 2

WWW.SUPPLYPOST.COM NOVEMBER 2020 · PAGE 25

Call Toll Free in Western Canada:

1-888-852-9021

*

RATES AVAILABLE FROM 0% FOR MORE FOR MOREINFORMATION, INFORMATION CONTACT: CONTACT YOUR LOCAL POWERSCREEN DEALER OR Bill Carney, Regional Director – Dealer Solutions & Inventory Finance, TFS Cell +1 502 264 2018 Email William.carney@terex.com

1-888-852-9021

*For well qualified customers. Financing offered by Terex Financial Services in the United States and Canada through its network of authorized funding partners. Additional terms & conditions apply. For 2015 and newer Powerscreen machines funded by 31 December, 2020. Program is subject to change or cancellation without notice and cannot be combined with any other offers or special pricing.

To find put more about Powerscreen products, visit our website

www.powerscreen.com © 2020 Terex Corporation

Washing Systems

www.ForemanEquipment.com

Page 26

Supply Post · supplypost.com

604-940-8210 or 1-800-205-6633

FOR SALE: 2014 TEREX FINLAY J-1175

November 2020

hello@skreenquip.com

TEREX FINLAY TEREX i-120rs Impact FINLAY I-120 IMPACT CRUSHER CRUSHER

• 42” X 30” Jaw Crusher, 6,000 hours.

• Detachable recirculating 12’ x 5’ two deck screen

TEREX FINLAY J1170 JAW CRUSHER

NORDMANN K-750 HOOK LIFT JAW CRUSHER

• 2019 Model

•Super Compact Hooklift Jaw Crusher

ALL EQUIPMENT AVAILABLE FOR SALE OR RENT TEREX FINLAY 684 screener

TEREX FINLAY CONVEYORS • Deutz TD 2.9 L04 60HP tier 4 final engine • 65’ or 80’ in stock

• 14’ x 5’ 7” Triple Deck, Cat C4.4

TEREX FINLAY C-1540P CONE CRUSHER

• With Pre-Screen • Available now on Vancouver Island

7801 Vantage Way, Delta BC

SCREENPOD S45 DUST CANNON •

Portable, trailer mounted, diesel • Automatic swing operation dispersed mist over large area • 35+ meter throw

skreenquip.com

November 2020

Supply Post · Our Readers Are Your Buyers

Page 27

New for 2020, John Deere introduces the 200G model to its excavator lineup. Designed to decrease the amount of fuel burn without sacrificing power or productivity, the 200G Excavator enables operators to quickly complete tough jobs while also lowering overall operation costs. Combined with John Deere’s broad bucket portfolio, coupler options and attachments, and accelerated swing speed, the 200G machine is ideal for many applications, including site development, roadbuilding, earthmoving and irrigation work.

The 200G machine features a 145-horsepower (108 kW) Final Tier 4 John Deere PowerTech™ PSS 4.5-liter engine. One of the most notable features on the 200G model is the low fuel burn: 11% less than the 210G. Adjustable power modes, including ECO and POWER settings, can be set by the

operator based on the job, engaging the machine to automatically change engine rpm and hydraulic pump calibration. With fuel savings in mind, the ECO mode setting allows the machine to automatically adjust to arrive at the best balance of fuel consumption and productivity.

“Many of our customers are balancing tight budgets with the need for maximum power and productivity on the job,” said Jonny Spendlove, excavator product marketing manager, John Deere Construction & Forestry. “With the new 200G Excavator, we are giving our customers the best of both worlds.

This machine is built with fuel saving at the forefront of its design, while also incorporating several productivity-boosting features to help operators efficiently complete jobs.”

The 200G boasts a faster swing speed due to effi-

ciencies with the hydraulic system. As a result, productivity is increased in applications that require swing movements, such as truck loading and trenching operations. Additionally, this machine is compatible with a broad portfolio of bucket options, enabling it to meet the demands of several different applications. With options ranging from 0.55 cubic yards to 1.34 cubic yards, the bucket design allows any operator to maximize productivity, regardless of the type of job. Additionally, customers can opt for a hydraulic coupler to quickly change between attachments for even more versatility.

The design of the 200G machine focuses on increased uptime. The John Deere-exclusive doublesealed swing bearing system has enhanced internal grease retention, improving the machine’s overall reliability. This helps to re-

JOHN DEERE

John Deere Expands Excavator Lineup With New 200G Model

duce the risk of contamination by materials like dust and water. Additionally, reinforced arm-to-bucket joints maximize frontjoint durability and reduce maintenance intervals for axial clearance adjustment.

The tungsten carbidecoated ear flanges provide high-wear resistance and

from the ground, allowing periodic maintenance to be completed with ease and reducing unwanted downtime.

To learn more about the 200G Excavator, visit www.

JohnDeere.com or contact your local dealer. b Source: John Deere

1-844-MORMAK1 SALES, SERVICE, RENTALS, PARTS | MORMAK.COM

Mormak Equipment is Western Canada’s authorized CEDARAPIDS, SIMPLICITY AND CANICA DEALER Cedarapids MVP450X 400 Hp Cone

WHO SAYS YOU CAN’T

HAVE IT ALL

long service life, while steel bushings with grease groove channels increase resistance to abrasion and reduce pin wear.

Finally, similar to the rest of the G-Series Excavator line, the 200G features ground-level service access. This design ensures most filters can be accessed

New bare Simplicity 6x20 Incline Triple Deck, 2 in stock, Blow out price $69,900 CDN

IN STOCK

For over 40 years Mormak has been the industry leader.

We are experts in designing and manufacturing customized aggregate equipment.

Our guiding principles are experience, honesty and trust. We stand behind more than 3,000 pieces of equipment in the field.

Call us 1-844-MORMAK1

TELSMITH

ALL-IN-ONE PORTABLE JAW PLANT Features a Heavy-Duty Vibrating Grizzly Feeder, 2238 Hydra-Jaw®, 5’x14’ Valu-King® Screen, and our new Titan™ T200 Cone Crusher on one chassis.

Mormak Custom Cedarapids 7x20 Screen Plant – Used

Mormak Custom MVP450 Cone Plant – Used

With only one machine to mobilize, operate, and crush, you can focus on what you do best....making a profit.

(AB / YT / NWT)

(AB / YT / NWT)

VERNON, BC 8140 Becketts Rd.

CHILLIWACK, BC 7912 Atchelitz Rd.

CALGARY, AB 6969 84TH St. SE

EDMONTON, AB 27321 Acheson Rd.

Page 28

Supply Post · supplypost.com

November 2020

Brokk Demolition RobotRemote control technology is gaining momentum across the construction industry. The ability to operate machines remotely has significant benefits, especially in applications that can be dangerous to the operator or that require precision tool use in areas not visible from the cab.

With remote operation, operators can position themselves for optimal viewing of the work area and away from jobsite risks.

“Increased safety and increased productivity are two of the greatest benefits to remote operation,” says Mike Martin, Vice President of Operations, Brokk, Inc. “And some contractors report, depending on application, they are able to complete work up to seven times faster with remote-controlled machines compared to using crews with handheld equipment.”

Remote-Controlled Solutions On Display Remote control has been popular in demolition applications for many years, however, the number of machines that come equipped—not just remotecontrol ready, but—with full remote-control operation is growing.

For example, at the last CONEXPO-CON/AGG, several dozen machines on display were remote control.

Brokk displayed several of their next generation radio remote control demolition robots, including their new Brokk 70—the smallest machine in their line.

Each machine features the company’s proprietary SmartRemote remote control technology. “To avoid unintentional operator strain, the remote uses a wide adjustable belt that holds the control box comfortably around the operator’s waist, away from the

upper back. In addition, intuitive controls allow the operator to work the machine without having to look down at the display,” says Martin.

Fecon displayed the remote-control FRC70 carrier (sometimes called a prime mover); it is designed for mulching and can traverse slopes up to 55 degrees. By taking the operator out of the cab, the operator need not experience the rigors of working at steep angles.

Husqvarna displayed their new remote-control LP 9505 trench compactor.

Operating in and around trenches is risky so, by taking the operator away from the machine, you decrease the risk of injury or death from trench collapse. The company also displayed their DXR 300 demoltion robot. Together with the SB 302 hammer, it has the highest power-toweight ratio in its class on the market, enabling a high

Box 279 R.R. #4, Saskatoon, SK Office: 306-244-4533 Email: contact@hikonindustries.com

PREVIOUSLY RENTED CONVEYORS AT REDUCED PRICES.

You can never have too many conveyors.

(2) 3675 Radial Stackers

(1) 3670 Tri Pak

“PROUD TO BE A CANADIAN MANUFACTURER” Built Tough! We Manufacture Rock Solid Equipment

www.hikonindustries.com

CONEXPO

Remote-Controlled Construction Equipment Offers Flexible Operation

workload.

Hyundai Construction Equipment introduced the remote-control HL960A wheel loader; the company expects this machine to serve in severe- or hazardous-duty applications once it becomes commercially available.

ScanReco reports the company has seen an explosion of electronic control of flatbed trucks in the past year and touts of the productivity gains when using remote control on truck-mounted cranes.

“Truck mounted cranes require the operator to precisely locate the crane on the jobsite. After an operator parks the truck and exits the cab, they check the position of the crane again from outside of the cab. Oftentimes, they have to get back into the cab to move the crane into a better position. With remote control, they can find a safe spot onsite that provides an optimal view for positioning the crane. They can even set the outriggers with the remote control,” says Jason Looman, President, ScanReco.

Increased Equipment Functionality At the show, ScanReco introduced several updates to their existing G2 (Gen 2) and G3 (Gen 3) product lines. Most notable is the inclusion of a global 2.4 GHz frequency. Already available in North America for a few years, this new global standard offers a longer range than other products on the market.

“Because of the higher bandwidth on 2.4 GHz, more data can be transferred in a shorter period and thereby reducing the duty cycle. This reduces the power consumption of

the transmitters, giving the operators approximately 50 percent longer operational time per charge of the battery. The increased bandwidth also boosts the update rate of the graphics in the 4.3-inch color display by a factor of four times, allowing for more advanced graphics to be presented to the operator without any delays,” says Looman.

Also, by combining the 2.4 GHz radio signal with a 4.3-inch color display allows many users to increase the amount of data and visualizations on their Personal Control Unit (PCU / transmitter), thereby allowing an operator to see the same indicators and feedback as are available inside the cab. In addition, the new color display can be integrated with a WiFi camera system. This allows

operators to see the jobsite in a whole new way.

As the number of cameras, sensors and other feedback devices on construction equipment increases, more equipment is being equipped with radio remote controls that have displays.

“As more equipment becomes autonomous, many original equipment manufacturers are removing the traditional cab from their equipment and are relying on remote controls to operate the equipment in service modes, or to simply bring the equipment to a starting position before it runs automatically,” says Looman.

“We believe this will be a trend going forward as equipment becomes more autonomous.” b Source: Conexpo

INTERIOR HEAVY DUTY PARTS

• Bucket and Boom Pins & Bushings • Center Hitch Parts • Hyd. Pumps • Diff. Parts

HEAVY EQUIPMENT PARTS & REPAIRS FULL REPAIR FACILITY FIELD SERVICE Servicing all major brands

CAT, HITACHI, VOLVO, KOMATSU, DEERE, HYUNDAI Parts, Service and Sales for Mining, Forestry & Construction.

Call today!

250.374.3443

INTERIOR DIESEL LTD. 728C Tagish St., Kamloops, BC V2H 1B7

November 2020

Supply Post · Our Readers Are Your Buyers

New Sennebogen Scrap Handlers Made The Difference At Belson Steel

Trusted Reputations “I looked at different brands out there,” he explains. “Sennebogen has a good reputation and they are known in the scrap industry.” More important, to Pozan, was the reputation of Sennebogen’s distributor in the Chicago area: Howell Tractor & Equipment. “Sennebogen has great equipment, but without Howell’s sales

and mechanical service and their ownership team, I might not have gone with their machines. The people who own Howell have a great reputation for support.”

After consulting with Howell’s Area Sales Manager, Bill McNamara, Pozan placed his order for two Sennebogen 835M purpose-built scrap handlers. “By the time I heard from the other sales representative, I had already purchased my Sennebogen machines,” he recalls.

Since then, both the equipment and the dealer have lived up to Pozan’s expectations.

Nice, Smart, Capable Pozan’s demands from his machines are actually fairly simple – to be up and running when he needs them, and to give him a long productive life.

His focus is zeroed in on meeting the needs of his major customer, the nearby steel mill, without fail every day.

“The Sennebogen machine is a very capable scrap handler, as well built as any,” he says.

“Scrap handlers today are all built for fuel efficiency, they’re built lighter than the excavators we used to have. But if I could find one built to last like they were in the old days, I’d do that. Among the ones being built today, I’d say Sennebogen is the premier machine.”

The real difference favoring Sennebogen, in his

view, is the people behind the equipment. “Howell is ‘Johnny on the spot,’” says Pozan. “They are responsive to phone calls; they work well with my mechanics. You want to see salesmen that want to help you and help themselves – it’s not a one-way street. In sales, it’s about being the most you can be to your customer. From top to bottom, they are nice, smart, capable people.”

Vision For PM In McNamara’s estimation, Pozan will only become happier with his purchases as time goes on.

“His first machine has 2000 hours on it and the newer one has 800 hours. He has service contracts on both machines, and they’re under warranty, so he hasn’t had to worry about maintenance or reliability so far. As the machines get older, though, he and his mechanics will come to appreciate the simplicity of Sennebogen engineering, and how easy to service they are.”

McNamara credits Pozan for his approach to ensuring a long productive life for their equipment. “Everyone talks preventive maintenance, but it’s easy for technicians to overlook some of the inspection checks that should be part of every service interval. Mark really gets it. He has the vision to recognize the value of PM. We use a 22-point checklist for each service call, and they allow us to take the machines out of

Large to small, we do it all!

Working harder, so you don’t have to.

Stocking new, used, and rebuilt parts & components for most makes & models.

OCTOBER SPECIAL:

Cat 926M Loader Boom, Bucket & Quick Attach Package

FOR SALE:

• Rebuilt 3304/3306 engine parts/blocks, Cat loader axles & final drives.

• Pkg Of Good Used/Rebuilt Cat Haul Truck Components, Call For Details • 2013 Harley Davidson CVO Roadglide, Call For Details.

CONSIGNMENT SALE:

• 3306 Take-Out Engine • Set of Cat 320D Double Gr Pads • HD Final Drives, Cylinders, Rebuilt Valve Bank etc • CAT 980 Medford, and Weldco Log grapples Kamloops, BC., CALL GRAHAM: 250-851-1100 | 250-573-4181 (Office/Fax) | bgparts@telus.net www.bgparts.ca

Reach and visibility from Sennebogen 835

Browse Thousands of Equipment & Truck Listings at .com

SENNEBOGEN

Marc Pozan was frustrated!

The owner and President of two scrap metal facilities near Chicago, Pozan had issues to resolve with his material handling machines as well as plans to upgrade his fleet – but he hadn’t seen or heard from his local dealer in months.

“Service issues and a lack of responsiveness to my questions were the main reasons for looking elsewhere,” said Pozan.

A family-run business for 60 years, Belson Steel Center Scrap Inc. is a 16acre scrap metal yard in Bourbonnais, IL. The business is complimented by Chicago Heights Processing, a specialty scrap processing and recycling operation. Between the two facilities, Pozan maintains a fleet of eight scrap handlers. Part of his plan to maintain his production levels and to meet the ongoing requirements of his major customers was to upgrade his fleet. For that, Pozan decided, he would have to find someone new.

So he went shopping.

Page 29

production long enough to complete the servicing properly. We do the walkarounds; make sure all the pins and bushings are getting grease and the grease lines are all connected. We give them the service reports and they pay attention.”

a smile to Constantino Lannes, President of Sennebogen LLC. In many ways, his philosophy for building the company mirrors the needs expressed by Marc Pozan. Lannes has always made dealer support a high priority, investing in a world-class parts and Invested In Dealer training facility near CharSupport lotte, NC. Lannes says, Pozan’s response to “Our service network is Howell service brings constantly recruiting ex-

perienced dealers who share our commitment to application knowledge, technical expertise, and parts availability. Our Regional Business Managers are uniquely qualified application specialists who are there to give onsite support to dealers and to customers in the field.

Our warehouse stocks the largest inventory of material handler parts in North Continued on page 30

AGGREGATE INDUSTRY EMPLOYMENT OPPORTUNITY Machinery Supply. has an exciting opportunity for an Aggregate Sales Representative to join our team in the lower mainland area of BC. In your assigned territory, you will be responsible for developing relationships with customers and provide solutions through product and application sales.

REQUIREMENTS: • 3+ years’ experience in the Heavy Equipment Industry.

• Ability to work in a fast-paced environment and be able to handle multiple tasks at the same time.

• Extensive travel within assigned Territory will be required.

• Must have the ability to demonstrate communication and organizational skills.

• Proficient utilizing computers with Microsoft products including utilization of Smartphones and iPad. • This position is exposed to work near moving mechanical parts, electrical systems, hazardous materials, fumes, airborne particles, and moderate noise levels. Appropriate PPE gear must be worn as required.

• Have excellent communication skills, both verbal and written • Experience with Aggregate Equipment would be a definite asset.

• Must have valid Driver’s License, clean MVR, and clean background screen This is a full time permanent position. A competitive remuneration package will be based on your skills and experience. You will experience a stable, work/life balanced culture, with a great range of benefits. Please forward your resume to Brian MacAdam: bmcadam@machinerysupply.ca Machinery Supply is an equal opportunity employer.

ABOUT THE ORGANIZATION: Since 1936 Power Equipment Company (PECO) has been a distributor of heavy construction and aggregate equipment serving the construction, mining and aggregate industries in multiple locations. Machinery Supply was acquired by PECO in February 2020 and this new role will be spearheading our first expansion into this market.

100 East Lake Drive, NE Airdrie, AB T4A 2K1

www.MachinerySupply.ca

Supply Post · supplypost.com

Continued from page 29

America, including every component for every machine we have currently operating.”

A rarity among equipment OEMs, Sennebogen’s dedicated training facility

offers hands-on instruction for technicians and operators for both dealers and customers, at no cost. “It’s part of our commitment to building the industry’s largest network of factorytrained technicians.” Pozan

foresees a time, before too long, when his own service team will travel to the Sennebogen Training facility to become part of that factorytrained network. b

Call: 403.503.7877 bmcadam@MachinerySupply.ca

Machinery Supply is the full-line Superior dealer for BC & Alberta.

• Conveyors • Crushers • Washing • & More

Call us today to talk about your operations’ needs.

Call today for special winter pricing on Clemro manganese. We are fully stocked with immediate shipping available.

John Deere Launches New E-II Articulated Dump Trucks Designed with the demands of today’s job site in mind, John Deere introduces the new E-II Articulated Dump Trucks (ADTs). The models, including the 410EII and 460E-II, incorporate customer-driven features, resulting in greater operator comfort, reduced fuel burn, increased uptime and lowered daily operating costs. With a redesigned dump body, updated operator station, and new drive and transmission retarder modes, the John Deere designed and built E-II models deliver ultimate productivity on the job.

“All of our ADTs are proudly designed and built

by John Deere in Dubuque and Davenport, Iowa. The new E-II trucks combine the most popular features of the E-Series line with customer-driven performance and operation enhancements, resulting in a machine that is easier and more cost-effective to operate,” said Cory Ouellette, product marketing manager, ADTs, John Deere Construction & Forestry.

“With the three standard drive modes, new body design, operator station enhancements and improved fuel burn, the E-II Series trucks provide customers with a reliable and durable, yet easy-to-operate, solu-

Source: Sennebogen

Crushing equipment available now for rental.

Crushers, screens, and more. Call for details.

100 East Lake Drive, NE Airdrie, AB T4A 2K1

www.MachinerySupply.ca

November 2020

RLC AGGREGATE EQUIPMENT FOR SALE · RENT · OR RENT TO OWN Call 1-833-706-9458 | Email: info@rlcagg.ca

FINANCING AVAILABLE OAC

New Cummins Re-Power 600kW c/w Cummins 1-Yr Unlimited Hr. Warranty. Additional New & Used Units Available.

Hikon 3033-12 Feeder w/Grizzly

ELRUS 3642 Feeder Impact Bed

New & Used Power Vans Available. Call For More Info.

New & Used Hikon 36x75 Conveyor

36x60 Conveyors, Can be used for Radial or Transfer

POWER VANS/GENERATORS/SCREENERS: 2001 Elrus 3642 Portable Feeder w/ hyd. grizzly .......................................................................................POR Used Elrus Van, 37-Stations, 200 HP & 400 HP Soft-Start, 6x10 Tower, 1,266 Gal. Enviro Tank ..............POR CONVEYORS/SPLITTER CHUTES/BELT SAMPLERS/PARTS: New Build, 27-Stations, 400 HP Soft-Start, 6x10 Tower, 1,266 Gal. Enviro Tank, No Gen Set .................POR New JP Radial Stackers (Hyd. or Elect), 36x40, 36x60, 36x80, 36x100, 42x40,42x60 ............................POR Used Power Van w/19 Starters & Used 2015 Cummins 150kW Power Van w/Elect., ..............................POR New Cummins Re-Power 600 kW w/Cummins Wty & 500kW Cummins QSX-15 Gen Set w/355 hrs ....POR New 2018 KPI/JCI 33-36150 Super Stacker, Used 2008 KPI/JCI 33-36150 Super Stacker ...........................POR 2013 CAT C-18 600kW, w/7,555 Hrs................................................................................................................POR New JP Triple Stack Conveyors, 36x60, 36x70, 42x60, 42x70 ...................................................................POR 2010 Fab-Tec 5x16 Contractor Plant c/w 150kW Gen Set w/ Electrical (3) Extra Plugs ...........................POR Used Radial & Transfer Conveyors, 30x50, 30x60, 36x50, 36x60, 36x75 ..................................................POR Used P6203 Telsmith Screen Plant, All New Belts ......................................................................................POR New JP 14 Yard Skid Feeder (Hydraulic Grizzly Option) ............................................................................POR FEEDERS 2017 Fab Tec 4242 Feeder c/w hyd. grizzly, control panel .........................................................................POR 2007 30 cu/yd. Surge Bin & 2005 20 cu/yd. Surge Bin.............................................................................. POR 2018 Hikon 4240-16 Feeder, c/w Hyd. Grizzly..............................................................................................POR Un-used 2017 Hikon 3033-12 Feeder with Grizzly ............................................................................... $124,320 WASH PLANTS, CONE CRUSHERS AND MORE EQUIPMENT AVAILABLE.

View Complete Inventory at www.rlcaggregateequipment.ca

tion that positively impacts their operation and their bottom line.”

A key feature on the E-II machines is the redesigned dump body, which is wider and has a lowered and leveled rail height to improve material retention.

A brand-new side sheet design makes the load height the same from front to back, while the widened bin provides additional tire coverage and easier loading. Additionally, the bin rail features an angled top, helping to reduce material spillage while traveling.

The updated operator station on the E-II models increases ease of use, productivity and all-around comfort. One of the most notable features is the single sealed switch module, reducing the number of switches by 25% compared to the previous models. An automotive-style multifunction turn signal lever includes lights and windshield wipers, further helping to simplify truck settings without limiting functionality. The new primary display unit provides a clear display of daily operation and enhanced diagnostic information. Other comfort-boosting features include the relocated HVAC controls for easy access to the temperature settings, optional Automatic Temperature Control feature, and a heated and ventilated premium seat option. Customers can also add the seat belt minder system, which includes a green beacon light outside the truck, providing confirmation that the seat belt is fastened. An optional fourpoint retractable seat belt harness is also available on all models.

The three standard drive modes — Normal, Eco and Traction — help to optimize the drivetrain and reduce inputs from the operator. The Normal mode provides the same great features found on the E-Series, while reducing fuel burn by up to 7% compared to the existing models. With Eco mode, the system reduces fuel consumption by smoothing throttle input and reducing maximum rpm. When conditions allow, Eco mode can improve fuel consump-

JOHN DEERE

Page 30

tion by up to 12% compared to E-II Normal mode.

The Traction mode helps the operator to maintain tire traction in soft underfoot conditions, automatically engaging the differential lock to minimize wheel spinning, and increases traction. To improve the function of the automatic differential locks, new wheel speed sensors have been added, enhancing the accuracy of engagement.

Also designed to boost operator productivity, simplified retarder controls help to create a consistent, smooth ride in all applications. Three transmission retarder modes — low, medium and high — offer different operating characteristics for loaded and unloaded trucks.

The design of the E-II machines maintains the best-in-class ground-level daily service capabilities.

Maximizing machine uptime, there is a 10% reduction of electric and hydraulic routings, further reducing potential leak points. The optional, factory-installed auto lube feature is filled at ground level and takes the guesswork out of lubricating grease fittings, increasing component life. Optional LED lights provide greater visibility in lowlight settings.

The 460E-II model is available with a new ejector body solution. This solution allows operators to spread a load over a given area and can be used in areas where there are overhead powerline concerns or where risk of rollover is high due to steep grade unloading.

The E-II machines are available with the John Deere industry-leading five-year, 15,000-hour transmission warranty.

With this warranty, which is available through the end of 2020, John Deere provides customers with confidence and peace of mind. b Source: John Deere

November 2020

Supply Post · Our Readers Are Your Buyers

Page 31

QUALITY NEW & USED AGGREGATE PROCESSING EQUIPMENT FOR SALE OR RENT

NEW JCI/VALE 6203 PORTABLE SCREEN PLANT Two cross conveyors & under screen conveyor, Hydraulic landing legs. .......................................... FOR SALE OR RENT

PARTS

NEW LONETRACK POWERVAN Cat C18-544Kw generator. New MCC capable of jaw, cone, feeder screen & stackers.........CALL HUGH FOR DETAILS: (604) 657-7167

We provide parts for all makes of stationary and mobile aggregate equipment. We offer a full selection of wear parts and high-performance aftermarket parts for most makes. In addition, we support our PDQ parts with 24/7 service for minimal downtime.

CALL US TODAY FOR FAST AND DEPENDABLE SERVICE.

Our service department offers it all. Factory trained and “production experienced” techs provide major component repair, full service shop repair along with comprehensive field service that will get you back to operating at peak efficiency.

Welding and major overhaul services available.

NEW VALE 3670-3TR SLIDE STACK RADIAL STACKING CONVEYORS 36” x 70’ radial stackers. 700 tph rated capacity. 20 HP drives. Very well equipped. ....................... ................................................................... FOR SALE OR RENT

SERVICE

CALL US TODAY FOR FAST AND DEPENDABLE SERVICE.

IN STOCK & READY FOR SALE OR RENTAL! NEW SANDVIK MOBILES TRACKED SCREEN PLANTS SANDVIK MOBILES FINISH SCREENS

QA335 The QA335 Doublescreen is a highly versatile mid-sized screening solution equipped with Sandvik’s world class Doublescreen arrangement. This innovative technology features two high velocity, angle adjustable screens, where both the primary and secondary screening angles can be adjusted to optimize screening performance and accuracy. 5’ x 13’ of total screen length. Cat C4.4 power. 58,000 Lb. machine.

QA441 The QA441 is the largest two deck tracked mobile screen equipped with Sandvik’s patented, world class Doublescreen system. Two high velocity screens that work independently to each other, the primary screen works as a fines extractor, while the secondary screen operates as a grader. Two processes combined on one plant, both primary & secondary screening angles can be adjusted relative to each other, offering exceptional flexibility and massive throughput. 5’ x 20’ of total screen length. Cat C4.4, 68,000 Lb. machine.

SANDVIK MOBILES SCALP SCREENS

QE442

QE342 The QE342 the latest evolution of our mid-sized heavy duty, tracked mobile scalping screen.

HD wear plate lined direct feed hopper over apron feeder feeds onto 5’ x 16’ two deck HD scalp screen. Three on board stackers for products. Can easily be set up as two way or three way split.

Cat C4.4, 68,000 Ib. Machine

The QE442 is the largest heavy duty model in our mobile scalper range. Designed for the serious aggregate producer, it has been upgraded to incorporate many product refinements for improved plant durability, efficiency, quicker set-up and reduced cost of ownership. This includes a new redesigned screen box to further strengthen longevity and reliability in the most difficult applications. Equipped with wear plate to protect against the toughest of rock. Cat powered this machine weighs in at over 85,000 lbs.

SALES CONTACTS:

William Thompson Hugh Porter 780-474-8082 604-657-7167 Willie@chieftainequipment.com hugh@lonetrack.ca

Equipment (2017) Ltd.

Supply Post · supplypost.com

SALES • RENTALS • PARTS OFFICE: 780-463-7077 | CELL: 780-887-7123 email: grant@groundw.com • EDMONTON • CHILLIWACK (604) 991-9779 • SASKATOON • WE SHIP ACROSS CANADA TELSMITH ALL-IN-ONE CRUSHING PLANT - VGF 2238 JAW - T200 CONE - 514 TRIPLE DECK INCLUDES SWITCH GEAR *** SALE OR RENT ***

FEEDER - JAW - CONE - TRIPLE DECK

NEW 200 HP CONE

NEW 300 HP CONE

NEW 2019 - 200 HP MINYU CONE CRUSHER COMPLETE WITH HYDRAULIC AND LUBE SKID. TOUCH SCREEN OPERATOR PANEL *** $244,900 ***

NEW 2010 - 300 HP MINYU CONE CRUSHER COMPLETE WITH HYDRAULIC AND LUBE SKID. *** $299,000 ***

616 TRACK MOBILE SCREENER

621 McCLOSKEY TROMMEL

PRODUCT CONVEYORS – TIPPING GRIZZLY – BALL DECK – CAT DIESEL ENGINE, 2 IN STOCK, LEDUC, AB & CHILLIWACK, BC *** FREE DEMO – INQUIRE TODAY***

1999 621 TROMMEL – 9968 HRS – CAT DIESEL UNIT HAS BEEN WELL TAKEN CARE OF. WILL INCLUDE NEW SCREENS WITH OPENING OF BUYER’S CHOICE*** $129,000 ***

KOMPLET JAW CRUSHER

NEW 2018 – 100’ RADIAL CONVEYOR

COMPACT TRACK MOBILE JAW CRUSHER 15 X 26 JAW CRUSHER – DIESEL POWER IDEAL FOR SMALLER YARDS AND VOLUME JOBS *** RENTAL OR SALE ***

36 X 100’ CONVEYOR – 480 VOLT DRIVE HYD RAISE/LOWER, AXLE JACKS & EXTENSIONS ELECTRIC WHEEL DRIVE – POWER CORDS *** RPO OR SALE ***

NEW 2019 POWER VAN NEW 2019 - 53’ POWER VAN - 10’ CAB - SIDE DOOR - 5755 L. DOUBLE WALLED DIESEL TANK - VAN IS GEN & SWITCH GEAR READY

DOPPSTADT TROMELS NEW & USED UNITS IN STOCK IN AB & BC UNIQUE NON-PLUGGING PUNCH PLATE DRUM, HIGHEST PRODUCTION - LOWEST PRODUCTION COSTS***FREE DEMOS***

FINANCING AVAILABLE O.A.C WWW.GROUNDWORX.CA

Automation Advances Productivity Of Cone Crushers If you’re thinking about investing in a new cone crusher you can expect a significant increase in productivity, even with less skilled operators.

“With old-school cone crushers, it all came down to the experience of the operator,” said Wayne van Antwerpen, crusher technology product manager for Terex Materials Processing. “They can tell when the machine is not crushing effectively, even by the sound of the cone crushing. They read the dials, checked the product, and made necessary adjustments. Today automation does all that for the operator.” According to van Antwerpen, “Experienced operators will typically get the cone to crush at about 75 percent of peak performance, but when utilizing automation, the cone’s performance moves up to about 75-90 percent of peak.”

“Automation ensures the best possible performance,” said Vincent Celsi, vice president of crushers for Metso Outotec. In Metso’s MX cone crusher line, settings are automatically adjusted based on load conditions, which improves the utilization of wear parts as well as worker safety. Overloading of the crusher is prevented by controlling the setting, power and pressure.

Cone crushers typically work in a secondary, tertiary or quaternary crushing role, reducing the size and shape of rocks in the downstream of a crushing circuit. They reduce the material in a crushing cavity by continuous compression between a fixed element (bowl liner) and a moving element (mantle). An eccentric swinging movement produces a force strong enough to crush the rocks.

“The main advantage of cone crushers is the ability to process big tonnages at a very efficient operational cost,” said Vincent Celsi, vice president of crushers for Metso Outotec.

How To Select A Cone Crusher When it comes to selecting the type of crusher,

“The MX crusher liners last 20-25 percent longer, depending on the application,” said Pierrick Boulay, product manager for Metso MX crushers.

Van Antwerpen cautions buyers to look at the bigger picture when deciding on which cone crusher to invest in. “You can get back your initial expenditure quickly but how much is it going to cost to you to run over the long term?” This requires calculating the cost of maintenance and replacement parts. “The biggest cost is always the wear parts and the crushers’ wear rates need to be considered on a cost/ton basis, but there are other factors too. For example, bronze bushing cones are more common than roller bearing cones, but on average roller bearings would last longer than bronze bushings in certain applications, sometimes up to three times longer,” said van Antwerpen. “But a set of roller bearings would be more expensive than a set of bronze bushings to replace.”

Celsi believes that it’s important for buyers to evaluate the ability of the manufacturer to deliver both service and parts.

“I think buyers don’t just buy a machine, they look for trusted partners,” said Celsi. b

there aren’t any hard rules to follow. One consideration is how often you plan to move the crusher or use it in different applications. Floating bowl crushers, like the Terex TC cone, are easier to use because the liners don’t need to be changed every time you move it from a secondary to tertiary role.

Screw bowl cone crushers require changing the concave and mantle liners to suit the specific application, but when configured correctly are excellent for high tonnage operations in mining or quarrying or recycling. Floating shaft (Spider Bearing) cone crushers have the ability to change the eccentric throw of the cone which gives it increased application versatility and productivity.

Metso’s MX series crushers first introduced in 2017, combine a fixed shaft with a rotating bowl.

According to Celsi, operators do not have to stop the feed for setting changes and liner changes can be completed quickly. In addition to lower operational costs and improved energy efficiency MX crushers offer selective crushing capability.

Source: Conexpo

CONEXPO

WE SELL WHAT WE KNOW & WE KNOW WHAT WE SELL©

November 2020

Cedarapids TG 420 Cone Crusher Metso MX3 Cone Crusher

CONEXPO

Page 32

CLASSIFIEDS

TO PLACE AN AD, CALL 1-800-663-4802 OR VISIT WWW.SUPPLYPOST.COM /ADVERTISE/CLASSIFIEDS BUSINESS OPP.

ATTACHMENTS

2008 IGH Hydraulic plate c o m p a c t o r, c a m e o f f EX200. $4,000. Langley, BC Ouellette Excavating Ltd. info@oelbc.ca DOUGLAS: (604) 240-0119

Stanley MB675 Breaker, Fully serviced a couple of years back and not used since. $3,000. Langley, BC Ouellette Excavating Ltd. obe@shaw.ca DOUGLAS: (604) 240-0119

Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

CWS Clam Grapple, fits Tigercat 880, 10 sq. ft.

Grapple capacity, nice shape. Approx. 7000 hrs.

SN: W000000963. $36,000.

May consider Trades on other logging Attachments/ components. Also — ask us about our other used Logging attachments & Components, incl. WBM & Waratah. Vanderhoof, BC steadyarc@gmail.com FRANK: (250) 567-1130

Bill 13 load and haul contract 11.25% of company own crew cut has avg approx 112000m3 over last ten years, may be negotiated into straight hauling or different components. Price TBD. Campbell River, BC Fearless Contracting Ltd. 2008 Cat CS423E, Ride on KEN: (250) 203-1440 Packer, Smooth drum, c/w S e l l i n g e q u i p m e n t o r padfoot shell kit. Reason trucks? Submit your ad for selling? Don’t have s e c u r e ly o n l i n e n ow : enough work for it. 2,453.7 https://www.supplypost. h r s. $ 6 5 , 0 0 0 . P i n c h e r com/advertise/classifieds. Creek, AB. Many pr int and digital dafroese79@gmail.com options available. Let’s get DAVE:(403) 432-0344 it sold!!!

PHONE: 1-800-663-4802

CWS Heavy duty stumping/brush rake 48” for 270 size Excavator. $3,200 OBO. Sidney, BC JFW Excavating jfwexcavatingltd@shaw.ca Owner has passed away JIM: (250) 480-9609 leaving behind a well e s t a bl i s h e d 2 2 - y r. o l d Truck & Crane Company located in Nanaimo, BC. on Vancouver Island. Turn-key fully operational business; includes Trucks, Trailers, 2014 ROTOBEC, Liebherr Cranes, Equipment, Active LH50 Heeling Stick Boom customer list w/ estaba n d R o t o B e c G ra p p l e l i s h e d p h o n e n u m b e r Model FD1250HD, 19 ft pin (that continues to ring). to pin length and 8 foot live Visit Supplypost.com for heel, we will sell separatefull sale inventory under ly, stick boom $7000 and “Business Opportunities” grapple $15,000 they are in good condition with only or Call for more info.

3500 hours of use, they are $380,000.

Dudeck Truck & Crane 2014 model year.

Millar Western Edmonton suenew@shaw.ca MIKE: (780) 910-6071 SUSAN: (250) 668-9310

WWW.ALBERTAENGINE.COM 64166-426 Ave E Aldersyde, AB T0L 0A0 ENGINE PARTS ENGINES • CALL MARK 403-519-7254 CAT • C15 6NZ ���������������� $11,000 • C7 ��������������$4,900 - $6,500 • 3126 ����������$2,500 - $4,900 • C7 RB LB ����������������� $9,500 • 3406B ���������������������� $6,900 • 3306B �������������������� $10,500 CUMMINS • 6CTA8�3 RB LB�������� $9,900 • ISL CM554 �������������� $5,500 • 6BT5�9 ROTARY ������ $2,500 • 4B3�9 ����������������������� $5,000 DETROIT • 4-71 RB ������������������� $6,900 • 6V92TA DDEC ������� $10,900 IHC • DT466E �������������������� $3,900 • DT466E Inframed ���� $6,900

1-800-361-7333

Ph: 403-720-3494 mark@albertaengine.com

COMPACTORS

CONVEYORS

NOVEMBER 2020 · PAGE 33

CRANES

100-Ton Demag AC100 w/ Kline Boom Dolly Tandem/ Tandem & 2nd winch for Demag. Good condition crane, but needs some TLC. Waiting on Service repair quote. Call for more info. $185,000 (Negotiable).

Dudeck Truck & Crane suenew@shaw.ca SUSAN: (250) 668-9310

DOZERS

2018 Caterpillar D3K2 LGP Crawler Dozer (UNUSED), c/w 8 way blade, A/C Cab, Tier 4 EPA Engine. $175,000.

Hayco Rentals & Sales brian@haycoequip.com PHONE: (604) 526-7260

4006 Atlas folding truck mount crane. $4,000.

NORM: (604) 206-1144

CRUSHERS 2007 John Deere 700J Crawler tractor. 6-way dozer, A/C, hyd. winch, Tr a y l o r 2 8 F t C o n e Crusher, sn #41228, 300 hrs, only on new cone, c/w Fruehauf power Van w/ a 250 Cummins, Kolberg C o nveyo r, C o m p l e t e New & used conveyors, Package! Traylor crushfrom 20’ to 120’, radial or e r w / 2 5 0 C u m m i n s , transfer conveyors, quick Power Plant and Kolberg delivery.

Conveyor. very low hrs on TYALTA INDUSTRIES INC. cone, set up remote from PHONE: 1-800-960-9939 loader, one-man operation, lots of extra screens, parts, CRANE EQUIP. E x c e l l e n t c o n d t i o n !

BOOM TRUCKS – vari- $120,000. ous lifting capacities & RICK: (780) 956-4525 For all your crushing C E RT I F I E D, ava i l a bl e equipment requirements. crane equipment & accesSales, service and parts sories.

MORMAK EQUIPMENT ken_herm@sympatico.ca PHONE: (250) 542-7350 VERNON, B.C. PHONE: (877) 538 3018 KPI 42” x 60’ HD Portable Transfer Conveyor, new belt, very good overall condition. $42,000 OBO. HUGH (604) 657-7167

COLD WATER CONTRACTING SALES & RENTALS 2005 Tigercat 870C, 6,000 Hrs. on Cummins Eng. w/ Brand New Cam, GN Roy Rotator Saw w/ Good Blade ....... $55,000 2006 Caterpillar 345C, Long stick, Steel Catwalks, c/w 6-tooth Bkt., Hyd. Pin Grabber, Auto Greaser, 3,970 Hrs ..... $95,000 2011 John Deere 848H, New Eng. & Torque Drive Re-bearing, Aux. Steering, Grapple Ext., 35.5 Tires, Net chains .... $85,000 2006 Volvo A35D 6x6, heated box, 11,500 Hrs ...... $10,000 1998 Hyundai Robex 200 LC w/ Denharco 4150 Delimber ... ................................................................................... $Call 2008 John Deere 903J, 40% U/C, 3,000 Hrs ......... $50,000 2015 Kenworth C500 Tri Drive Heavy Spec, 6-Way Lockers, Balance of 5-Yr. Wty. on Eng./Emissions, Trans & Rear Ends .... ............................................................................ $160,000 2016 Ford F150 Ecoboost, Nav & B/U Cam., 20” Rims, Goodyear Tires, Spray in-box liner, 171,431 Kms .... $25,000 More Info & Photos visit our Dealer page on supplypost.com Or Call 855-933-4593 or coldwatercon@tbaytel.net | 3144 Arthur Street, Rosslyn ON

7248 hrs. This item is for AUCTION ONLY. More details on page 5.

Team Auctions TRAVIS: (403) 793-1269

2011 Cat D6N LGP - Pat Dozer, Canopy & Sweeps, Carco 50 Winch (Slow Speed),

Recent

U/C

7704hrs. POR KS. Inc, Edmonton, AB Kenski5544@gmail.com PHONE: (780) 990-9604

McEown & Associates Ltd. (Receiver) **All Units are sold AS-IS WHERE-IS Campbell River, BC** Abbyequip T/A SS tank trailer....................................... $3,000 2018 Raja prototype 30-ton capacity 53’ tri tilt .......... $72,000 2018 Reitnouer 53’ tri B-Train hi-boy trailer unit ........ $72,000 2018 Trail Tech 53’ tri step deck trailer alum.............. $51,000 2017 Trail King 53’ tri step deck trailer ...................... $47,000 2017 Trail King 53’ tri step deck trailer ...................... $47,000 2017 Trail King 53’ tri step deck trailer ...................... $47,000 2008 Chapparal 53’ tri step deck trailer ..................... $36,000 2018 Trail King 53’ tri step deck trailer ...................... $53,000 2015 Fontaine 53’ tri Hi-boy alum.............................. $39,000 2017 Trailtech 30’ tri equipment trailer ...................... $36,000

For More Info & Photos visit our Dealer page on supplypost.com Call: 604-558-8020 or 604-558-8011 Email: mt@mceownassociates.ca

Page 34

Supply Post · supplypost.com

BANNING EQUIPMENT LTD

ENGINES

8901 Penn Road, Prince George, BC Phone: 250-564-7226 · Fax: 250-564-7233 Email: scott@banningequipment.com EQUIPMENT FOR SALE

2013 - K008-3 Mini Excavator Kubota ..........................................$20,000 2012 - ZX350LC-5N Excavator Hitachi........................................$135,000 2011 - 246C Skidsteer Cat...............................................................$27,500 2008 - D6T XW Crawler / Ripper 1bbl MS..................................$175,000 2006 - 930G Wheel Loader Cat ......................................................$65,000 2005 - TK741 Feller Buncher - HF221 22” head...........................$65,000 2001 - 730A Feller Buncher Prentice............................................$85,000 1998 - IT28G Wheel Loader Cat.....................................................$41,500 1997 - D7R XR Crawler Cat c/w 2bbl MS Ripper ......................$155,000 1993 - IT24F Wheel Loader Cat .....................................................$39,500 1988 - 518 Compactor Cat ..............................................................$15,000

DOZER ATTACHMENTS

Blade - D8N-R Double angle tilt & C-Frame ...............................$25,000 Brush Rake - D7G - Destec Pin on 137” ........................................$7,500 Brush Rake - D7R - WBM Pin on 138” ...........................................$8,500 Ripper - D3K/D4K/D5K Cat New 3 Bbl ...........................................$6,500 Ripper - D6N Multi-shank Cat 1 shank ............................................7,500 Ripper - D7R - Cat Multi-shank .....................................................$20,000 Ripper - D8N-R-T Ripco Multi-shank- No Controls ...................$25,000 Winch - D5H - Cat ...........................................................................$12,000 Winch - D7H/R /D8N/R Hydraulic & Controls .............................$12,500

WHEEL LOADER ATTACHMENTS

Blade Snow 930K/938K EFI/Hyd/Ang/Fusion, 12 ft .....................$15,000 Blade Snow 930K/938K WBM 12 ft. Fusion Hyd/Ang ................$16,000 Blade Snow - fits on 980G Log Grapple 14’ ...................................$1,500 Bucket - IT28 Hydraulic Clam Q/C 92” ...........................................$3,000 Bucket - IT28G/930G - Cat Q/A 100in..............................................$3,000 Bucket - 924/926 Corral Cleaning bkt. *New* .............................$7,500 Bucket - 938H/938K Cat Fusion Q/A -106” .....................................$7,000 Bucket - 966D/E/F - Cat 126” ...........................................................$6,500 Coupler - 938H Cat Hyd Fusion Q/A ................................................$5,500 Coupler - 980H - Imac Q/C hydraulic..............................................$5,900 Forks - IT28G - IT Q/A 48” ................................................................$4,500 Forks - 930K, 938K Cat Fusion - Q/C 54”.........................................$5,500 Forks - IT38G - WBM Q/A 46” .........................................................$4,000 Grapple - 930H - IT Q/A EFI Almost New .......................................$4,000 Grapple - 966G Cat Log grapple WBM ..........................................$7,500 Jib - 930G/H, Cat Fusion Lugging ....................................................$4,500 Secondary Steering Kits 950H/962H/966H/972H ..........................$3,500

MOTOR GRADER ATTACHMENTS

Blade Snow 140H/140M Hyd. Lift & Angle WBM ......................$15,000 Blade Snow 140M, 160M,14M M/Angle,New Cat 11’ ...............$11,000 Blade Snow 140M, 160M Frt/Nose Mnt No Angle 9’ ...................$6,000 Lift Grp. Front - 140G/H/M - Cat.......................................................$6,000 Lift Grp. Front - 14H/14M - WBM ....................................................$8,500 Snow Wing -140M/160M - WBM ripper mnt. *New* ...............$12,500 Snow Wing - 140M - WBM Masted ...............................................$7,500 Ripper - 14G - Cat MS .......................................................................$9,500 Ripper - 16G - Cat MS .......................................................................$9,500 Wobbly Wheel - Cat, J/D, Volvo Graders 13 wh.........................$15,000 Wobbly - 13 Wheel tow behind compactor ................................$12,000

SKIDSTEER ATTACHMENTS

Blade - S590 Skidsteer forklift 6’- 8’ Extendable Plow ................$1,650 Blade Snow - S590 Skidsteer Hydraulic angle 96” .....................$4,500 Bucket HD LowPro Skidsteer 72” edge *New* ...........................$2,025 Bucket RD LowPro Skidsteer 78” tooth *New* ...........................$1,650 Cement Mixer Edge Skidsteer Q/A #24962....................................$3,500 Fork - SS - AMI 48” 4200 LB HD Q/A *New*.................................$1,065 Jib - Skidsteer 2000 lb Cat Lugging ................................................$1,850 Cement Mixer Edge Skidsteer Q/A #24962...................................$3,500

BACKHOE & MINI EXCAVATOR INVENTORY

Bucket - 301 Cat 10 Series - EFI Q/C 12” .......................................$1,650 Bucket - 303.5 - EFI 18” Q/A Cat 2014.............................................$1,650 Bucket - 50 Series - 305 EFI Q/A 24” ..............................................$1,850 Bucket - Bobcat - 20” Digging Q/C....................................................$800 Bucket - 420E,F - 42” Cat Q/C Cleanup ..........................................$1,750 Bucket - 430F - 30” Cat WBM Q/A..................................................$1,800 Bucket - 430F - 42” Cat WBM Q/A..................................................$2,250 Hammer NPK GH-07 Mini Ex Breaker Inc/chisel tool .................$4,850 Thumb - 35 - Hydraulic thumb *New* .......................................... $1,950

EXCAVATOR ATTACHMENTS

1997 Caterpillar D7R XR Angle/dozer w/tilts, A/C cab/canopy, diff steer, 2 bbl MS ripper, EPA LABEL P R E S E N T. R e p l a c e d bearings in track frames.

Rebuilt hard bar. Replaced pins & bushing in hard nose and bores in frame.

Removed & replaced bearing & seal in fan. Removed & replaced A/C compressor, replaced fan & A/C belts. Replaced bearing in machine frame. Replaced Pivot shaft seals. Replaced Hydraulic pump & Fuel Pump. $155,000 Banning Equipment PHONE: 1-844-331-7226

2012 Deere 750J LGP, 6-Way blade 156”, 34” Pads, H6H winch, Cabair, Rear window guard, Po s i t i v e a i r - s h u t o f f, 4,033 hours, Excellent Condition, Price is n e g o t i a bl e . $ 1 4 6 , 0 0 0 .

Edmonton, Alberta paulrfarwest@gmail.com PAUL: (403) 854-1184

1999 Cat D8R - Engine, Rad, Steering Pumps & Hyd. Pump-12,198hrs., L & R F i n a l s , To r g u e 9481hrs., Trans-5597hrs., Hard Bar-300hrs., Rollers/ Idlers 75%, Pads 70%, Rails 40%. $118,500.

2011 Cat D7E, 7596 Hrs, Kelowna (East Central), BC 7A Dozer Twin Tilts, Multi Pausch.equip@shaw.ca Shank Ripper, Canopy, PAUL: (250) 470-8688 Sweeps, Rig Saver, Very EMPLOYMENT Good Condition, Sheet Metal Straight, Excellent Experienced Cat operator Service History, Jobsite looking for employment, Ready. $210,000. operating Cat and Dozer KS. Inc, Edmonton, AB for 6 months. BC or Alberta work ok. kenski5544@gmail.com PHONE: (780) 990-9604 BOB: (306) 342-4968

BROWN INTERNATIONAL SERVICES NEW PARTS for IHC - Dresser - In Stock, including Exchange Transmissions, Steering Drives & Drop-In Motors, Carco Gearmatic Winch Products FULL TRACK PRESS FACILITIES Complete Excavator & Crawler Tractor Undercarriages Berco, Trek & Intertractor

MACHINES FOR SALE · 1990 TD7G c/w ripper, enclosed cab, new factory Cummins 4B engine .........................................................................................P.O.R · D-6 TD15E Grapple ..................................................................$4,500 · TD15E Semi-U Blade ................................................................$4,500 · TD20 E/G double angle tilt blade.............................................$3,500 • TD15C Beales brush blade .......................................................$4,000 • TD15C Winch, Carco F50..........................................................$3,500

Brush Rake - 200 - 60” Banning Mfg. WBM Q/A .........................$6,600 Brush Rake - 250 - 72” WBM Q/A *New* .....................................$8,000 Brush Rake - 300 - 72” Banning Mfg. WBM Q/A .........................$8,800 Bucket - 200 - 36” Craig WBM Q/A (ZX210) ..................................$6,000 Bucket - 200 - 60” WBM Q/A 320C/D .............................................$6,500 Bucket - 250 - 36” Cat WBM Q/A....................................................$5,000 Bucket - 250 - 42” Cat WBM Q/A (329E) ........................................$5,000 Bucket - 250 - 60” WBM Q/A...........................................................$5,500 Bucket - 250 - 66” Q/A Finning .......................................................$4,900 Bucket - 330 - 36” WBM Q/A ZX350LC-3 .......................................$6,500 Bucket - 450 - 84” WBM Q/A ..........................................................$7,800 Chuck Blade - 250 - WBM 84” WBM Q/A .....................................$6,500 Chuck Blade - 300 - WBM 84” Q/A.................................................$6,500 Chuck Blade - 450 - WBM 120” WBM Q/A ...................................$6,500 Coupler - 250 Cat Hyd Q/A ..............................................................$3,500 Coupler - 250 WBM Q/A ...................................................................$3,500 Coupler - 300 Cat Hyd Q/A ..............................................................$3,500 Ripper - PC78US-6,307D\308D,ZX75US-3, CWS ......................... $1,500 Ripper - 150 - Finning Q/A Lugging .................................................$1,500 Ripper - 200 - WBM Q/A...................................................................$4,000 Ripper - 250 Banning Mfg. WBM Q/A ............................................$5,000 Thumb - 200 - Gentec MT2650 HD *New* ....................................$2,750

• TD20G-20E Grapple ..................................................Reduced $5,000

330L/330B/EL300B & D8N...................................................................CALL 320C/325B/325L/930G/938G/980.........................................................CALL Check www.banningequipment.com for parts list or call

www.brownihc.com |E-Mail: info@brownihc.com

CURRENTLY WRECKING THE FOLLOWING MACHINES

November 2020

• TD20E GUTO DVT 800 engine ...................................................$9,500 • Dresser TD9H/D39/TD10M, 39 link, rails, c/w 22” pads, new take off, track fit ..............................................................................$5,800 · Dresser TD20E/G 42 Link Track Grps, c/w new 26” SS pads .......................................................................................... IN STOCK • Cat D7 17A Pup Engine ............................................................$2,500 · 924 Cat, New QA coupler, Weldco Beales ................................$1,500 WRECKING: IHC S8A Skidder; Cat D7 17A; Komatsu D85E-18, good U/C; TD20C Large Inventory Of New & Used International & Dresser Parts & All Brands of Undercarriage

“We Service What We Sell” Ph: (250) 546-6518 • Fax: (250) 546-3100 4274, Box 557 Hwy 97A North, Armstrong, B.C. V0E 1B0

8.3 Cummins, needs rebuilding, complete engine, c/w Bosch injection 2009 Kobelco SK 850 pump and turbo. $2,000.

- mine duty/trenching PHONE: (250) 219-6594 machine c/w 5 tooth HD Large inventory of used 50“ dig bkt 35’ dig depth and rebuilt Detroit Diesel, /50’ reach, aux tool piping, Cat, Cummins, Perkins, patter n changer, counDeutz and Volvo engines. terweight removal kit w/ P.G. Truck & Equipment remote, expanding adjustPHONE: 1-800-946-9400 able track width (hd bolts) OR (250) 561-1234 Komatsu diesel power, walk in gangway to serEXCAVATORS vice filters, motor, catwalk on cab side, work lights, air cond. 2150 hrs., $670,000.

Obo. Likely, BC glenericgr@gmail.com PHONE: (778) 417-0168

Hitachi ZX160LC-3 w/ Accurate hyd. Q/C, WBM 24” dig bkt. Included in price/on order : new Daequip hyd. thumb, new Daequip 36” dig bkt, new Daequip 60” clean up bkt.

6158 hrs. $118,000 PHONE: (250) 468-1000 2010 John Deere 135D, Hyd. thumb and blade, 2bkts. QC. Call for more info & pricing.

KEN: (604) 290 8209

2007 Link-Belt 240 LX, 13,300 hrs, c/w hyd. Q/C, 2 bkts, aux. hyd. plumbIng, rebuilt engine. New Rad & hoses, hyd. Pump done 10,000 hrs. New Berco UC comp. inc. shoes, very well maintained since new, smooth operator. $65,000.

Langley, BC PHONE: (604) 328-7981

DUMP, PLOW, SANDER TRUCKS 2006, 2012, 2013, International 7400, Single Axle.

2006 - International 7600 Tandem, Heavy spec. Front plows and some belly plows, All have fresh MVI’s and fresh paint. Automatics with air brakes and air suspension. Diff locks, power windows, locks, and mirrors. Liquid Deicer tanks............................. $32,000 and up.

2004 Komatsu WA 200-5 loader, 2.6 yd quick attach bucket, with quick attach forks with grapple. New Tires and Paint..............$49,000.

MILK RANCH LTD

250-457-0099 C A C H E

C R E E K

B C

Sexsmith Used Farm Parts Ltd. Sexsmith, AB | www.usedfarmparts.com E-mail: farmpart@telusplanet.net

DISMANTLING: EXCAVATORS: Komatsu PC228USLC, JD 200LC LOADERS: JD 444J, JD TC44H, Case 621, JD 644C, JD 544B, IT14B Cat, W14, Case W20, Case W20C, MF 33D, Case W14B, JD 544 CRAWLERS: Komatsu D53A, Case 1150B, JD 450C, Cat D7, Cat D82U, Cat D73T, Cat D82V · FORKLIFTS: IHC 4500, MF 6500 TRENCHERS: Case 860 · GRADERS: Champion 720A SKIDSTEERS: Cat 297, Gehl 4625, Melroe Bobcat 943, 863, 853, 843, 610, Case 1845, 420 NH · PACKERS: Bomag BW213 PDH-2 BACKHOES: JD 610T, JD 310D, Case 580B, Case 780, Ford 575E A LARGE SELECTION OF TESTED DIESEL ENGINES CUMMINS, CAT, PERKINS, JD & CASE

1-800-340-1192

Buying Equipment For Dismantling

November 2020

Supply Post · Our Readers Are Your Buyers

Page 35 Looking for heavy equipment or truck par ts?

SupplyPost.com has over 36,000+ new, used, and

2008 Hitachi ZX75US-3 w/ 4930 hrs., hyd. blade, 26” pin on bucket, aux. hydraulics, bolt on rubber pad inserts. Also available new hyd. thumb, new Q/C, new clean up bucket, new dig bucket (extra). $69,500.

PHONE: (250) 468-1000 Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

2014 Cat 320EL, 40” dig bucket, Q/A, ver y nice machine, 2,724 Hrs. $150,750.

Cando Rail Services ryan.wannamaker@ candorail.com PHONE: (204) 725-5163

2015 John Deere 35G Mini with 1818 hrs., Brandt buckets, 18” dig bucket, 34” clean up bucket, Brandt hydraulic thumb, hydraulic blade. Like new. $55,000.

PHONE: (250) 468-1000

Now wrecking (2) ZX200LC-3’s.

2015 Link Belt 290 X2, Langley Excavator Parts Tier 3 - Isuzu 207 HP, Exchange Inc. We l d c o q u i ck a t t a c h - parts@langleyexcavator. ment, Hydraulic thumb, com Aux. hydraulic, 2 Buckets, PHONE: 1-888-530-5444 Catwalks, Espar, Positive FEEDERS air shut-off, Cab-air, Heavy duty stump & belly pans, Window guard, 825 hours, Mint Condition, Price is Negotiable $234,000.

Edmonton, Alberta paulrfarwest@gmail.com 20 yard surge bin, In & Out 36” conveyors, Ready to PAUL: (403) 854-1184 work!. $29,000. OBO Would you like to receive HUGH: (604) 657-7167 our paper monthly?

FELLER BUNCHERS Subscribe today. supplypost.com/subscribe

reconditioned PARTS listed for sale, with new parts 2012 Tigercat 845C, 4200h

being added every day! in engine, 2000h on u/c, Search by make or part new saw pump, newer number. Start here: main pump, new radiator,

https://www.supplypost.

newer glass. 13,200 hrs. com/parts $199,000. Burns Lake, BC.

Do

Imus Contracting

Facebook? Go to this link

Brimus16@hotmail.com

and like our page today!

BRIAN: (250) 251-0719

supplypost.com/facebook

you

like

us

on

PRINCE GEORGE

TRUCK & EQUIPMENT

250-561-1234 - www.pgtruck.com

1-800-946-9400 EQUIPMENT

2015 Komatsu PC 138US10, 3000 hrs, New cab guards, new thumb, 1 new dig & 1 new clean up bucket. Hydraulic pin grabber. $125,000, also for rent.

AJ: (778) 536-4545

2016 TigerCat X870C Feller buncher. ST5702 22 1998 Link-Belt 4300 Q, G o o d U / C, r u n s we l l . 2005 John Deere 270C LC in. 360 deg rotation head, c/w dig bucket. $40,000. w/ CWS hyd. thumb, CWS A/C, 8560 hrs. This item is dig Bucket, CWS clean up for AUCTION ONLY. More Terrace, BC bucket, Brandt Cab guard, details on page 5.

Long’s Logging Inc. Team Auctions rocket9292@hotmail.com Catwalks. $48,500.

PHONE: (250) 468-1000 PHONE: (250) 615-2402 TRAVIS: (403) 793-1269

MONTHLY SPECIAL

1996 Linkbelt 2800Q guarded, thumb, 2 buckets ........................................$35,000

NEWLY LISTED

2004 Deere 544J loaderSOLD .............$45,000 1996 Deere 160 Exc ....................$29,500 SOLD 2014 Deere 160C Exc..................$54,500 SOLD

INVENTORY

1996 Deere 992 RB ..........................POR 1996 Link-Belt 2800Q RB............$39,500 Ford 9000 Diesel SA Dump..........$7,500 Rebuilt 2003 Hitachi 370-5 Log Loader ...............................................POR 1988 988 B Bucket machine......$55,000 1985 Ford L8000 Crane Truck ....$10,500 John Deere 670B Grader .........$24,500 Hardly Used CWS Lugged Brush Rake for 300/350 ...........................$6,000 Caterpillar D8H Dozer .....................POR Cypress 7280 Grapple Yarder, Rebuild ............................................................POR

WWW.ROYQUIP.COM

250-203-0134 FOR MORE INFO

WYATT’S USED EQUIPMENT

1978 Cat D9H Dozer, UBlade & Ripper. ...................$75,000 1984 Cat D8L Dozer, T/T Angle Blade & Ripper ......$90,000 1979 Cat D8K Dozer, UBlade & Ripper. ..................$42,500 1976 Cat D8K Dozer, UBlade and 4BBL Ripper .......$37,500 1985 Cat D7G Angle Blade, Brush Blade & Winch ..$62,500 1979 Cat D7G, Cab, Angle Blade & Winch ..............$67,500 2004 Cat D6N LGP, 6-Way Blade & Ripper .............$85,000 1975 Cat D6C, T/T Angle Blade & Winch ................$45,000 1998 John Deere 850C T/T Angle blade & Winch ...$57,500 2002 Komatsu PC300LC-6 Excavator, 2-Bkts., Thumb, Chuck Blade, 16,500 Hrs.........................................$54,500 2006 Hitachi ZX270LC-3 Excavator, 2 bkts, Q/C, 12,895 hrs ..............................................................................$124,500 2004 Case 921C Loader ..........................................$14,500 1995 Cat 14G Grader,16’ MB, c/w Ripper ...............$95,000 2000 Champion 740A, 14’ MB, Ripper & Wing .......$55,000 2007 Taylor T220S Forklift, 5,300 hrs on engine ....$31,000 1981 Cat 631D Scraper ...........................................$45,000 1979 Cat 769C Off Highway Truck ..........................$54,500 2005 Komatsu PC200LC-7 Proc., Waratah 620W ...$77,500 1989 Cat EL 240 Stroke Delimber ...........................$18,500 2006 Cat 325C Log Loader Power Clam Grapple ....$87,500 1998 Cat 325 BLL, No Grapple, 300 Hrs on eng. ....$50,000 2006 Trans- Gesco TG475B Feller Buncher.............$67,500 2005 John Deere 903G Feller Buncher ....................$45,000 2014 John Deere 848H Grapple Skidder, 7,000 Hrs, Chains & Dual Function Grapple .......................................$155,000 Cat D5M 6-Way Blade & C-Frame .............................$7,500 Cat D7R Semi U-Blade, Complete ...........................$16,500 Cat D9H 4BBL Single Shank Ripper ......................... $7,500 Cat D6M/D6N Ripper c/w mounts, 2 shanks .............$8,500 Cat D5H Winch c/w Controls & Pump.....................$13,500 Cat D7R Winch........................................................$10,000 Cat D8N Fuel Tank .....................................................$1,800 Tree Tow Dresser TD20E Grapple ..............................$5,000 Accurate 84” Chuck Blade- Fits Linkbelt 4040 ........$15,000 NEW Accurate Komatsu PC308 Exc. Thumb .............$6,000 Full Set of 32’’ Pads For Link Belt 225LX ..................$1,900 NEW Komatsu Idler, fits PC 400-6 or HD300-6 ........$1,950 Parting Out Cat 14G, Cat D7G & Cat D8N...............Call

Call 250-706-8594

• 2006 JD 2054 Waratah 622B Processor ........... POR. • 1993 Ford 9030 w/Seppi Forest Mulcher ...$49,900.

• 3412 Cat GenSet 906KVA, 600/480 Volt .......... POR. • TD20G & TD20E Dressers, w/winch & ripper....POR. • 2000 Timberjack 4x4 20K lb Forklift ...........$16,000.

• Onan 18kW GenSet, 1 or 3 ph., w/trailer .....$7,500.

• Model 5000-21 Superlift Str. Boom Crane ......$4,950.

• 2012 Alkota National Pressure Washer........$4,950.

TRUCKS & TRAILERS • 1998 Kenworth Tandem Dump Truck .............. POR. • 2005 Cancade Tridem End Dump ...............$28,500.

• 1984 Trailmobile Dry Van ................................. POR. • 2000 Cottrell C12 Car Hauler Trailer ..........$12,500.

• 2014 W/S Tridrive ............................................. POR. • Tandem Clam Dump ...................................$14,500.

• Tandem Pup Gravel Trailer ............................... POR. • 2007 53EQT Tridem BWS Equipment Step ....... POR. • 2008 Red W/S 4900 ......................................... .POR. • 2015 W/S Tri-Drive Tractor ............................... POR. • 2005 F/L Tri-Drive Winch Tractor ...................... POR. • 1998 Peerless Super B Logging Trailer ................. POR. • 1999 Superior Super B Logging Trailer ................. POR. • 1995 DCAP Tridem Clam Dump .................... $18,500.

• Tridem Hayracks ................................................... POR. • Assorted Water Tanks and Trailers Available....... POR. • 2013 Volvo D13 Auto Shift................................ POR. • 1990 IHC DT466 Flat Deck ................................ $6,500.

• 2009 Durastar S/A w/ Reefer Van .........................POR. • 1999 FL80 Tandem 24' Deck, Moffat Fork Lift ......POR. • 1986 IHC Tandem Water Truck....................... $17,900.

• 1994 W/S Service Truck w/Fassi Crane ........ $26,500.

• 2003 Sterling Tandem w/26’ Box ..................... POR. • 2014 BWS Ez-2-Load Hiboy 53' Tridem ............ POR. • 2012 IHC Prostar Autoshift Tractor .................. POR. • 1991 GMC Topkick Serv Fuel Truck, crane.$12,900.

• 2005 48’ Great Dane Tandem, Dry Van ............ POR. • 2005 Westec Vac Tank ..................................... POR. • 1990 ParPac Tri-Axle ........................................ POR. • 1990 KW T800, Cummins, 5th Wheel .........$10,500.

• 1981 Ford, 20’ box, p/tailgate, Allison trans. ... POR. • S/A & Tandem Axle Jeeps................................. POR.

WRECKING • 793 JD Buncher • 2200 Madill • 748G Skidder • G67 Grapple • TD20E • Timberjack 450A & 520 Grapple Skidder • Hitachi EX200-5 • 230 & 404 Timberjack Line Skidder • Clark 668B Line Skidder • Clark 125B Loader • John Deere 693D • Treefarmer C7 & C8 Line Skidders • 82-40 Terex • TS24 • Warner & Swasey Grad-All 300 Hydro Cruiser • Good selection of Detroit Diesel, Allison, Clark, Twin Disc, Cat, Cummins and Perkins engine and trans. parts.

Page 36

Supply Post · supplypost.com

GENERATORS

2005 Tigercat 860, 5702 Tigercat Head w/110, degree rotate, 24 inch saw, 400hrs. on new UC, less than 1000 hrs. on new motor, recent saw replacement, rotec redone less than 2000 hrs. ago, main pump changed less than 2000 hrs. ago, new front window, boom updates done, hyd. tune-up done this March, new seat, this machine has been extremely well maintained by owner. Ready to go off the lowbed and into the bush, no work needed whatsoever! $110,000.

Burns Lake, BC Ootsa Lake Cattle Co. ootsacattle@emypeople. net PHONE: (250) 694-3300 Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

2006 Olympian G50F3 Cat V6 Ford engine, 45 kw, 220,440,660,3 phase Liquid cool Insulated chasi, natural gas and/or propane.

1920 Hours. Fantastic condition. Asking $22,500.

Okanagan Falls, BC Mrupert6@icloud.com MICHAEL: (250) 486-6648

600 KW New Cummins engine, 3400 hrs on Stamford

a l t e r n a t o r,

277/480, 2000A breaker BC Diesel Generators $78,000. Falkland, BC bcdieselgenerators.com denis@bcdieselgener ators.com PHONE: (250) 554-6661

COASTAL PACIFIC EQUIPMENT coastalpacificeq@gmail.com

1-800-811-6911 • (250) 392-7755 685 South Mackenzie Avenue, Williams Lake, B.C. V2G 1E2

2007 Volvo 210BLC Q/C thumb, 2 bkts, 8,746 hrs ......... CALL 2008 Dressta TD9M w/6 way, encl. cab, 3,208 hrs ................................................................ Huge Savings! CALL 1989 Cat D4H encl. cab, grapple, winch ......................... CALL 1990 TD15E - angle or semi-U blade .............................. CALL 1994 Dresser TD12C 6-way blade, winch, guarded ....... CALL 1992 DRESSER TD 15E A/Blade, winch, guarded .......$54,000 1987 Dresser TD20G A-blade & ripper .......................$49,000 1993 Dresser TD20G LT, winch or ripper .. FOR SALE OR RENT 2009 Dressta TD20M LT, ripper, cab, new motor, trans. & U/C................................................................................... CALL 1981 Dresser TD25E with A-blade, ripper ..................$35,000 1996 Dresser TD25G A-blade, cab, ripper, new U/C...$90,000 2004 Dressta TD25H 8,000 hrs ............................... $135,000 Timberjack 520 Swing Grapple, 24.5 x 32 tires, rebuilt trans. .....................................................................................$18,000 Cat 977K for parts, Trans shot ........................................ CALL 6-Way Blade for Dressta TD 15M ................................... CALL · · · · · · · · · ·

MISCELLANEOUS

New & Used Parts for IH-Dresser & Dressta machines TD9, TD10, TD12, TD15C, TD15E, TD25C-E rippers TD12C, TD15C-E, TD20E-G-M clearing rakes TD20E-G-M, TD25E-G Semi U blades TD25C-E-G Full U Blades · CAT D7G Blade & C-Frame Dresser 530 GP bucket · TD15C-E, TD20E-G winches Samsung 210 track group TD8E, TD8G track group Cummins 5.9 (CPL 938) New & Used parts for IH-Dresser-Dressta- JD648EKomatsu D65E · Wrecking Dresser 520, Dresser 530 wheel loader, Samsung 210LC · JD748G3 Grapple Assy and Tigercat 630D Grapple Assy

Check us out on Facebook!

GRADERS

2008 Cat 14M VHP 9716 Hrs, 16’ Blade, 20.5R25 SnoPlus (Excellent), Multi S h a n k R i p p e r, G r a d e Control Ready, Joystick Controls, Rig Saver Excellent Service History, Excellent Condition, Jobsite Ready. $210,000.

KS. Inc, Edmonton, AB. kenski5544@gmail.com PHONE: (780) 990-9604

LOADERS (Backhoe)

2012 Case 580SN 4 extend a hoe. 4x4, 4in1 front loader bkt. newer radial tires, 24” dig bkt, ride control, heat & A/C. Fully serviced and ready to go.

Very low hours for the year. $79,500. Langley, BC Inland Group PHONE: (604) 607-0300

LOADERS (Log)

November 2020

LOADERS (Skid Steer)

2012 JD 524KZ, cab, w/ AC, heater, third valve, 2006 Bobcat S185, good hyd Q/A bucket & forks, condition, c/w dig bucket, 20.5R25 tires, 4,108 Hrs. grading bucket and snow $93,750. bucket. 1,070 hrs. $27,900 Cando Rail Services Amstel Construction Ltd. r y a n . w a n n a m a k e r @ harrymethorst@gmail. candorail.com PHONE: (204) 725-5163 com

(2) 2000 Link-Belt 4300 Q Heel boom. 20,000 + hrs., U/C good. Both in good cond. Many spare parts to be sold separate/ or w/machines. $60,000.

Terrace, BC Long’s Logging Inc. rocket9292@hotmail.com PHONE: (604) 888-6633 PHONE: (250) 615-2402 Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

John Deere 800C Log Loader w/ new high and wide U/C, iMac front and grapple, and Isuzu Diesel engine. Great runner; all service and repair documents available. $138,000.

PHONE: (250) 468-1000

MOUNTAINSIDE EQUIPMENT Call Kelly at 1-855-950-1905

LOADERS (Wheel) 2012 CAT 950G - Ready to go to work, has mostly pushed snow, no leaks, onboard scale. 10300 hrs., $115,000. Yorkton, SK 2018 John Deere 204K acelectric6@gmail.com PHONE: (306) 621-6420 mini loader, Cab w/ AC; Coupler; General Purpose

B k t ; 4 0 5 / 7 0 R 2 0 . S N : 3” & 4” Lowbed decking up 1 L U 2 0 4 K X H Z B 0 4 4 6 4 6 , to 24’ long. 2x8 truck deckSTK: 0U044646. 350 hrs, ing 12’ to 24’ long. Bridge timbers cut to size. Poles $99,000. Winnipeg, MB for pile driving, any size.

BRANDT Metal roofing and wall cladPHONE: 888-2BRANDT ding. We deliver “even to the moon’. can-ambuildingsupply@ shaw.ca CAN-AM LUMBER MILL PHONE: (604) 580-1415

2017 Cat 545D Skidder, 3,738 Hours ......................... $187,900 2004 Volvo EL210LB with 622B Waratah .................... $39,000 2003 Madill 2850 Log Loader .................................... $190,000

PROCESSORS H100C International, recent work done on the

2011 John Deere 903K Buncher, 85K in recent repairs .. $85,000

m a c h i n e i n c l . b ra ke s,

2016 EC380E with Rock Crusher/Ripper, 3,153 hrs .... $620,000

heads, injectors, starter,

2006 G780B Volvo Grader, 13,670 hrs .......................... $76,000 1996 D8R Cat Dozer, 17,228 hrs ................................. $114,900 2014 240 Hitachi Log Loader, 9,320 hrs ..................... $225,000 2014 903K2 John Deere Buncher, 10,794 hrs ................... SOLD 2005 870C Tigercat Buncher, 16000 hrs ..................... $129,000 2015 848L John Deere Skidder, 4,574 hrs .................. $253,000 2012 1910E John Deere Forwarder, 18,200 hrs .......... $176,900 2008 903J new injectors, fuel pump, front window, stick bushings, batteries, new top sliders, main pump replaced 2 yrs ago............................................................................... $65,000 2017 LX870D Tigercat Buncher, 5,600 hrs.................. $515,000 2016 855C / 600 Southstar Processor, 7,900 hrs ....... $464,900 2013 Tigercat 870C .................................................. $195,000 2013 John Deere 2454 Log Loader ........................... $195,000 2011 John Deere 848H ............................................... $79,999 1994 Cat 330 Log Loader............................................. $85,900 2012 2154 John Deere Log Loader, 13785 hours ...... $149,900

LUMBER

alternator, pin & bushing work. C/W log grapple & bucket. $22,000. Qualicum Beach, BC cgregson@xplornet.ca CAROL: (250) 335-2090

Hitachi ZX200F Processor, Forestry Machine (2002), with Waratah 622B forestry head. 26,700 hrs. $59,000 PHONE: (250) 468-1000

ZF TRANSMISSIONS & DIFFERENTIALS

- REBUILDS & REPAIRS Moxy, Terex, Volvo, John Deere, Case - specializing in off-highway applications - quality and cost-effective work - on-site testing and troubleshooting - available 7 days a week

Also offering on-site repairs and servicing of all makes of construction and agriculture equipment.

Dolphin Mechanical Services Ltd. Langley, BC - Call Eric 604-314-8032 dolphinmechanicalservices@telus.net

November 2020

Supply Post · Our Readers Are Your Buyers

Page 37

Wally’s tires

RVs

Quality New Tires & Chains

Phone: (250) 833-8349 Powerscreen 511 Trommel 2017 Link-Belt 3240PHN.

c/w tracks. Well maintained

Owner-operator retiring,

unit, c/w 4 sets of screens,

machine is ready to work, Well maintained, excel-

2005 Holiday Neptune lent Cond. Equipped w/ PDQ36 - 42,500 Miles. See Southstar QS500 multi- ad page 43 for full list of stem processor. 5,594 hrs. features and price. robert.watson@supply $340,000. Penticton, BC post.com Greg Collier Logging Inc. ROBERT: (604) 856-2206 PHONE: (250) 488-7725 Equipment For Sale Online

er, good for topsoil or

SCREENING

1/2’’/3/4’’/11/4’’/11/2’’ plus sand screen. 1800 hours. new track chain rails.

gravel, c/w extra screens. Fresh paint. $54,900 OBO. Sidney, BC Q u a l i c u m B e a c h , B C. JFW Excavating $4,750. jfwexcavatingltd@shaw.ca

SAND SCREWS

Very good used KPI model – We have thousands of 5044-32S Sand Screw equipment & trucks for sale Work ready, For sale or at SupplyPost.com! Log on Rent $45,000 HUGH: (604) 657-7167 today... www.supplypost.com

Honda powered screen-

JIM: (250) 480-9609

LINK PARTS LTD. S E R V I C E

&

E QU I P M E NT

FELLER BUNCHERS 2015 John Deere 959K 5,600 hrs (new engine) FR24B ...................... $259,900 2006 John Deere 909J 11,000 hrs 22" Head ....................................... $74,900 PROCESSORS 2002 John Deere 2554 Waratah 622 Warrior Head .............................. $49,900 2006 Madill 1800 Waratah 622B Head ............................................. $134,900 2005 Cat 330CFMHW c/w 624 Waratah Head .................................... $203,000 LOG LOADERS

2006 Powerscreen MK11, 2 0 0 4 L i n k - B e l t 2 4 0 L X D e u tz d i e s e l p owe re d W/622B Waratah 20,000 presently operating, extra + hrs. Ready to work. screens. C/w shredder. Will consider smaller screener $42,000. Terrace, BC in trade. Qualicum Beach, Long’s Logging Inc. BC. $65,000. rocket9292@hotmail.com cgregson@xplornet.ca CAROL: (250) 335-2090 PHONE: (250) 615-2402

2013 John Deere 2954D 14,000 hrs Tmar Heel & Grapple ................ $129,900 2014 John Deere 2954D 11,000 hrs Tmar Heel & Grapple ............... $149,900 1996 Hitachi EX400LC-3..................................................................... $29,900 2012 John Deere 3754D 11,000 Hrs $75,000 in Repars & new UC ... $219,900 1998 Hitachi EX270-5LC Clam .......................................................... $34,900 2002 Caterpillar 322C FM Clam ........................................................ $54,900 2016 Madill 3800C Tmar Heel & Grapple ......................................... $379,900 2003 Kobelco SK370 Heel & Grapple ................................................. $34,900 2001 Caterpillar 330B FM Heel & Grapple .......................................... $59,900 2013 John Deere 3754D 7500 Hrs Tmar Heel & Grapple .................. $149,900 EXCAVATORS

MERLIN’S BUY & SELL

1995 Caterpillar 330L RB Back Spar hoe w/ Digging Bucket ................ $21,900 2007 John Deere 450DLC w/ 48" Digging, 84" Clean Up, Ripper ......... $74,900

Log/Lumber Forks with overarm Weldco Beales Q/A ................................................................... $6,500.

Forks - WBM Q/A .......................................... $4,500.

Grapple Narrow-78” .................................... $CALL. Grapples - 930, 966C, D, F............................. $CALL. Buckets - 920, 950, 966C, 966D, F, G ............ $CALL. Booms & Couplers ........................................ $CALL. Tires - 1800 x 25 - 40 ply - New & Used ..... $CALL. Tires - 20.5 x 25 Radial, good used ............. $CALL. Tires - 23.5 x 25 Radial, used ....................... $CALL. Chains - 26.5 x 25 Double Diamond Stud ... $CALL.

2014 844K-II John Deere, 6,100 hrs Log Grapple ............................. $249,900 2014 744K John Deere, 6,000 hrs Log Grapple ................................ $214,900 1985 Caterpillar 988B Log Grapple .................................................... $38,900

REPLACEMENT PARTS FOR CATERPILLAR

MERLIN GISE 250-819-4444 merlin.gise@shaw.ca

WHEEL LOADERS

BULLDOZERS 2002 Hitachi DX75M ............................................................................ $24,900 GRAPPLE YARDERS 1983 Madill 044 .................................................................................. $99,500 1975 Washington 78A ........................................................................ $98,900 SKIDDERS 1994 Timber Jack 480 Grapple Skidder ............................................... $18,900

1977 John Deere 640 Line Skidder ................................................. $5,900

1-844-991-3169 EQUIPMENT FOR SALE 1987 Champion 740A, Good Condition, 50% Tires Overall, 1 Set of Chains, 12’ MoldBoard, Front Plow, Hydraulic Snow Wing, Heat, Well Maintained, Ready To Work., 20,000 hours .............................................................................................$29,000 2007 Caterpillar D6R XW Series III, Very Good Condition, 95% U/C, Sweeps, Screens, Rock Guards, New Left Final, New Hardbar, C/W DAT Blade, Multi Shank Ripper, Heat, A/C, Well Maintained, Fresh Service, Ready To Work. 11,900 hours ..................................................................................$97,000 2005 Volvo EC240BF, Good Condition, 60% U/C, H&W Road Builder Pkg, Newer Engine, Newer Hydraulic Pumps (300hrs), C/W 2 Buckets, Hydraulic Thumb, Q/A, Auxilary Hydraulics, Forestry Guarding, LED Lights, Heat, A/C, Well Maintained, Ready To Work. 12,000 hours ...................$80,000 Complete inventory & photos at: www.majorequipsales.com Like us on Facebook

MARCHER SKIDDER TIRES & CHAINS • Economically Priced Tires & chains • Fast Shipping • Mounting Available (Locally) • Trade-Ins Welcome

SKIDDER TIRES

• 24.5 x 32 - 20 ply......................................................... $2,500 • 30.5 x 32 - 26 ply ........................................................ $3,200 • 35.5 x 32 - 26 ply......................................................... $4,400

SKIDDER CHAINS

• 30.5 x 32 - 3/4” link - Diamond Style .......................... $4,000 • 35.5 x 32 - 3/4” link - Diamond Style ........................... $4,400

Wally ’s Private Parts Quality Used Parts Phone: (250) 833-8349

Evenings (250) 835-4678

Located in Sorrento, BC

RUNNING MACHINES FOR SALE • Superior Hayrack, safety’d to Nov20, pulls tri-dr or tndm .......... $15,000 OBO • Peerless Log Trailer & Jeep, good rubber, alum wheels, will safety prior to purchase................................................................................... $15,000 OBO • Brand New Unused 2013 Promac brush cutter, fits 200 size, ready .... $9,500 • WCB Clam Grapple ............................................................................ $12,000 • 748E Skidder, excellent shape, new tires .......................................... $35,000 • 618 Timberjack buncher, nice shape................................................. $28,000 • 320C Excavator with power clam ...................................................... $50,000 • JD200LC Excavator w/thumb Q/A bkt, forestry cab, high walker runs good ......................................................................................................... $38,000

PARTS MACHINES Skidders John Deere 640D-Just came in • John Deere 848H Skidder • John Deere 648D Grapple Skidder • Burnt 648 GIIIJD Skidder• John Deere 648GII Burnt • John Deere 748GII • International S7 Skidder • S10 International Skidder • 748GII Skidder • 2005 Cat 545 Skidder • 545 Cat skidder, 748GIII, 748GII, 848 JD Skidders • 525 Cat Skidder • 630 Tigercat Grapple Skidder • 518 Cat Skidder• S8, S9 International Skidder • 380, 404, 450, 480, 550, 660 TJ Skidders

Excavators 240BLC Volvo Excavator • 220 Hitachi LC • 230 JD LC • 690E w/ Denarco - 3000Stroker • 210 Volvo w/ 2000 Limmit • 240 Volvo Excavator• 210 Volvo Excavator Burnt • Case 1085 Rubber Tire Excavator • Cat 325L Excavator with 2200 Limmit Stroker • 160 Kobelco Excavator 2004 Burnt • 200 LC Hitachi • 2005 330 LinkBelt Excavator • 325 Cat Excavator• Link-Belt 2800 Quantum 3000 Dewarco • 210 300 Komatsu • 210, 200 Hyundai W/ Harricana Stroker • 330, 320, 325, 322, 225, 235 Cat • Hitachi 270 • Hitachi EX200LC • 220 Komatsu

Loaders Log: JD 2054 Log Loader, • 330 Cat Log Loader with Thunderbird Log Loader • 644A Jd Loader Wheel: • 125 Clarke Wheel Loader • Terex 8231 Loader

Rock Trucks Volvo A40C Rock Truck

DRILLS

Bunchers

Caterpillar M40 Tank Drill ................................................................. $34,900

Just came in: 860 & 870 Tigercat Bunchers • Madill 2200 Buncher • TJ 625 Buncher • Madill 2800 w/ 360 Head • 630A Prentice Tilter Buncher • 850 TJ Buncher • 950 TJ Buncher • Timberjack 950 Buncher • Madill 2200 Buncher Burnt • 2007 753 JD Buncher(Burnt) • 748GIII Burnt• 618 Buncher • 2628, 608, 618, 628 TJ Bunchers • 630 Prentice Buncher

OFF HWY LOGGING TRUCKS 1970 Kenworth 850 Off Hwy ................................................................ $29,900 1980 Pacific P16 ................................................................................ $59,900 SELF LOADERS

Ashley Roney: Wayne Giles: 250-691-1650 250-845-9169

Evenings (250) 835-4678

Located in Sorrento, BC

2007 Kenworth T800 ........................................................................... $34,900 MISC TRUCKS

2006 John Deere 250D ADT, Rock Truck ...................................... $64,900 1979 Ford F600, Fire Truck ......................................................... $11,900 1996 Peterbilt 377, Fuel Truck ...................................................... $11,900

Crawler Tractors • D8H Cat, D7F Cat, Komatsu D65D

Graders • 686 & 740 Champion Grader • Austin Western Champion D600-760 Tractors • 630B Tigercat

Trucks • 1995 Freightliner, Series 60 Detroit, 470 Hp, 40,000 Lb 410 Ratio Rockwell Axles, Dbl Lockers

CREW BOATS 1984 West Bay 24' 8 Passengers........................................................ $58,900 1984 Grady White Twin 150 Yamaha Outboards .................................. $29,900 TUG BOATS 1956 S. Madill GM 671 ........................................................................ $34,900 OTHER

Powder Mag Rebuilt with-new door ........................................... $11,900 PARTING OUT - CALL FOR PRICING 1999 Tiger Cat 860 Feller Buncher • 2005 Hitachi ZX350 FM Log Loader 2000 Hitachi EX350LCH-5 Excavator • 1991 Avelny Barford RXD28 Rock Truck

linkpartsltd.com Cell: 604-240-7977 | Office: 604-882-0004

Other parts machines • 320 Waratah Head • Coring Hotsaw 20-22 Head • OMEGA 20-20 Ton Hyd. Crane • Crane Ph 20-1A Omega • Denharco 3000-3500 Strokers

Used Tires and Chains • 35.5 x 32, 30.5 x 32, 24.5 x 32, 23.1 x 26 • 18.4 x 34, 26 x 28 • 18.00 x 25 • 14.00 x 24, 16.00 x 24, 20.5 x 25

Tracks • 618, 628, D6, D7, 200

Running Motors • 8.3 5.9 Cummins; 671, 353, 453, 471, 6V53 • Detroit Diesel; 466, 414, 4276, • 4045 John Deere

Visit www.SkidderBuncherParts.com MASTERCARD For More Info & Photos! VISA &ACCEPTED

Page 38

Supply Post · supplypost.com

November 2020

SNOW BLOWER

Cedarapids 7203 Portable Screen Plant, Two cross conveyors & Under-screen conveyor, Tandem axle chassis, 460 V., 3 Ph. Motors. $195,000.

HUGH: (604) 657-7167

SKIDDERS

79/91 Pete, fresh DD4 14 Lt., 18918, new clutch, new driveline, 411’s with 1 0 0 g a l l o n a l u m i n u m locker, new SI scales, new fuel tank/tool box combo, 14600 ft. axel, 7” exhaust, 2014 Snow Blower RPM Includes pump. $2,500. 16,400 tare, can separate.

Tech Model #LM220-119 Langley, BC $59,000.

Cat C7 Two Stage Dual PHONE: (604) 328-7981 PHONE: (250) 640-1055 Auger, 4,500 hrs. $75,000.

OBO. Whitecourt AB.

info@rptl.ca 2017 CAT 545D, clean & straight unit. 35.5 tires. PHONE: (780) 648-3950 Rear are about 90%.

TANKS Fronts are about 70%.

Chains about 60-70%.

Priced to sell.

KELLY: (250) 617-1905

TANKS-DRILLS

TRENCHERS

(2) 1978 Traxxon Tank Drills, lots of spare parts.

Asking $40,000 OBO. Hagensborg, BC. Forest Fish Ent. Ltd. NEIL: (250) 982-2359

TRACKS

2015 Bron TR450 Trencher, powered by a 450 horsepower, Cummins GSX15 Engine with just 475 hours of use recorded. Other features include, a self leveling body and wheel, oscillating track 1980 Clark 68F grapple 100 US gallon L-shaped frames, and a tri-core coolskidder. Good r ubber, ing package. Weighing in at chains. Runs well. $32,000. a l u m i n u m f u e l t a n k .

Terrace, BC i n c l u d e s p u m p. $ 9 0 0 . CAT 335 pads, rails & around 75,000 pounds this Long’s Logging Inc. beast could be yours today. sprockets will also fit rocket9292@hotmail.com Langley, BC $575,000.

335/328 etc 2500 hours PHONE: (604) 328-7981 PHONE: (250) 615-2402 great shape. $4000. Open Edge Equipment sales@edgeequipment. to offers. brad.thomson@cwc.work com 1-780-722-8129 · www.truenorthequipment.ca PHONE: (604) 319-2144 PHONE: 1-855-714-3343

1987 KW c/w Vanguard 1021 Grapple Crane, 36” magnet w/generator.

Cummins N14 Plus engine, wet kit for end dump trailer, fitted w/lowbed ramps.

Allied Salvage & Metals art@alliedsalvagemetals. com ARTHUR:(604) 328-2522

TRUCKS

Weldco 250 Series 40” Excavating Bucket, 5 Teeth, Kat Lugging ...........................................................................$2,995 Hultdins SG520S Grapple, c/w GVS173 Rotator ..........$6,950 2012 Hyundai 210LC-9, Waratah 622B Processor, Forestry Cab, Guarding, High Walker, 19,981 Hours ..................$79,500 2012 Hyundai 250/Southstar 585 Processor, 6750 hrs ....................................................................................$220,000 2000 Prentice 620, Quadco 5600 head, newer engine & undercarriage ...............................................................$93,500 2011 Hyundai 250LC-9 Excavator, Q/C, 2 Buckets, Hyd. Thumb, 2,300 Hrs.......................................................$135,000 2012 Hyundai 210LC-9/LogMax 7000XT, 13,332 hrs. ...........................................................................$104,900 2018 Ardco AMT 600 Articulating truck ................... $POR 2013 Risley/Lako Premio L750 Processing Head, 20 demo hours (like new), top saw, laser find end, complete......$39,500

air ride and wetline. CALL FOR $$ JEFF: (519) 580-6480

10,000 hrs., 650k, Cat C15 6NZ 475-550hp, Pintle hitch set up for pup or quad, Good running, ready 2007 9900i INT, C15 550 18 speed 391 gears 4 wheel lock 46rears on hendrickson air ride and wetline. CALL FOR $$ JEFF: (519) 580-6480

to work! $36,750. Pincher Creek, AB. dafroese79@gmail.com DAVE:(403) 432-0344

FOR SALE Pictures Available LOW BED TRACTOR; 2012 PETERBILT 316,500 km, Paccar 13L eng., 18 spd, 46 double lockers..........................................................$72,500. certified, last certification 2012, as is .......................................$2,000.

2007 FL M2 SERVICE, 106, 4 x 4 service truck, brutus body, 8800 cobra crane, 325 miller, 40 CFM van air comp. Work ready ............ ............................................................................................. $95,000 OBO.

2007 Waratah 624 Harvesting/Processing Head ....$39,500 2005 Deere 850J Dozer, 6-Way Blade, Ripper, Cab w/ Brush Guards, 50% U/C, 8,000 Machine hrs., 2,000 hrs. on New Engine .........................................................................$103,500

Super 40rears on 8bag

1973 BRENTWOOD 45’ HIBOY TANDEM AXLE TRAILER, not

2001 Komatsu 270LC-6LL Log Loader, Forestry Cab, Riser, Log Loader Front, Espar, Weldco Butt & Top Grapple .........$79,500 2010 Deere 2954/Waratah 624C, 14,419 Hours .....$67,500

18spd 410 gears 14.6frt,

Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com 2002 Western Star 4900FA

TRUE NORTH EQUIPMENT INC.

2008 Cat D6N LGP Tractor, 6-Way Blade, EROPS Cab, Brush Guard, Winch, Good U/C, Nice Clean Machine, 9,600 hrs. ....................................................................................$145,000

2005 T800 KW, C15 550

MADILL 0-99 YARDER, working condition ...........................$140,000.

1996 GMC pickup. 270,000 CAT 320 pads, rails & k m s , n e w e n g i n e a t sprockets 4,200hrs good 174,000 kms. $2,500. conditions. $2000. Open to Langley, BC offers.

PHONE: (604) 328-7981 Conwest Contracting brad.thomson@cwc.work PHONE: (604) 319-2144

MADILL 009 YARDER on rubber c/w series 60 .........................$POR. 1980 MADILL 071 YARDER ON RUBBER, 6V92TA four axle carrier, 4 guy lines, work ready. ..........................................................$150,000.

2012 HITACHI ZX 350 EXC. with 5,500 hrs ................. $175,000. OBO. 2006 CAT 345C,13,900 hrs, thumb, recent U/C......................$125,000.

1988 CAT D5H LGP, with 5,500 hrs, good U/C, direct drive, straight blade, no ROPS ...........................................................................$26,000.

D65 KOMATSU LGP, track groups at 85% ................................$3,000.

D10 N/R/T TRACK RAILS, 1 set at 80% ...................................$10,000.

TRAILERS

CUMMINS K-19, power unit, KTA 525, in sled ..........................$POR. WHISPER WATT 15 KW, single phase, gen set 1950 hrs, on trailer, good condition ..............................................................................$7,000.

1 9 9 4 Pe e r l e s s t r i d e m lowbed, removable mechanical neck, 20’6” deck space, 9’6” wide w/ outriggers, booster compatible, MVI, 22.5 rubber. $38,000. OBO duczak96@hotmail.com AARON: (250) 319-3721 Trombone Trailer 40’ – 65’ Available for Rent, Low Weekly Rate or Truck & Trailer for Hire.

HARRY: (604) 781-2355

1982 Pacific P512p 8x4 Deck Truck Includes: 400 Cummins, 26’ Flatdeck, 75 Ton Winch, 73,369kms. $24,850. Contact us for more information.

Wilf Hewat Repairs Ltd whrepair@telus.net PHONE: (250) 265-3124 1971 Ford Louisville tandem truck, Par ts Only. $2,000.

NORM: (604) 206-1144

2

-

GEN

SETS,

enclosed

Trailer

c/w

Switch

Gear;

(Cummins 8.3, 1200 RPM, KTA 525, Working Cond.)

(Cat 3304, PCNA, 50 Kw, Good Condition) ............................. $22,500.

TWIST A WRIST as new for 220-250 Hitachi CWS .................$5,000.

3 TOOTH RIPPER FOR D6N assembly, as new .......................$ 4,500.

JRB HYD. PIPE GRAPPLE w/ Q/C ............................................. $4,500.

VOLVO L 150 E, hyd. pipe forks w/ Q/C sliding forks, 64”x 106” as new .................................................................................................$3,500.

NEW KOBRA HYD. DRYWALL FORKS, FOR HIAB ..................$1,350.

~HOPE MECHANICAL SERVICES~

~ PHONE ~ TEXT ~ EMAIL ~ GLEN AT 604-795-6827 ~ g.golos@telus.net RAY AT 604-860-3000 ~ easyhope@yahoo.com H.D. MECHANICAL / SALES & SERVICE

November 2020

Supply Post · Our Readers Are Your Buyers

WASH PLANTS

New 2018 M2-132 Extended Cab 4x4, Maintainer MTS-1-084 132” Crane Body, 10,000 l b s. C ra n e, 5 0 - G a l l o n waste oil recovery system, VMAC 60 CFM Rotar y Screw Compressor, Miller Bobcat 250 Welder “ON SALE”. $239,980.

C o m m e r c i a l Tr u c k Equipment Ltd. Contact Darryl Cameron DCameron@comtruck.ca PHONE: (604) 790-4927

2013 Peterbilt w/ 2015 Anser Trailer, Cummins 550, 1,000 hrs on turbo, PT/RTLO 20918B transmission, Michelin trailer tires, 1/4 barrel of Lubriplate, 2-spring pks., 2 sets of new trigs, ¾” socket set w/ other tools, 6-rebuilt rims, Will do inspection for new owner, c/w 1989 Ford pick-up, Asking $115,000 OBO. Mark Gallicano PHONE:(250) 837-9555

VANS

YARDERS

2003 Fab Tec Wash Plant, 5x16 3-deck screen, 36x25 FMSW, Hyd. screen raise & lower, Exc. Cond. POR. D.S.W.Equipment Ltd. dswequip@telus.net DON: (780) 678-4703 Equipment For Sale Online – We have thousands of equipment & trucks for sale at SupplyPost.com! Log on today... www.supplypost.com

WINCHES

1988 Thunderbird TSY-50, 3 Drum Yarder capable of all types of cable yarding.

New roller, sprockets and rebuilt idlers on under carriage. Also features new 3/4” swedged cable on the haul back and middle main.

Engine was completely

2015 Kenworth T880 Very Clean Unit, Cummins 550 HP, 401,996 KMS, Eaton Ultrashift, 46K Rear Ends, 3.91 Ratio Fr o n t 3 8 5 / 6 5 R 2 2 . 5 , Rear 11R24.5, All Tires Excellent, 52” S l e e p e r. 4 0 1 , 9 9 6 k m . $100,000. Edmonton, AB KS. Inc kenski5544@gmail.com PHONE: (780) 990-9604

rebuilt 1200 hours ago, along with new radiators 48’ Strick tandem axle van, Cummins 312 KW gen set, Electrical switch gear to run a 125 HP cone crusher, screen plant, feeder, conveyors. (1) VFD, Handy mans special, to be sold as is. $39.000.

D.S.W.Equipment Ltd. dswequip@telus.net DON: (780) 678-4703

and new pro-heat for the engine. Canal Flats, BC. $400,000.

Hyster D6C Winch off CAT Dozer, free spool-

Hoobanoff Logging Ltd. DENNIS: (250) 421-1632

ing. Complete w/ controls. Next Advertising Deadline Make me an offer today! is Nov. 13, 2020. Call Pemberton, BC

Jennie for rates.

JAY: (604) 905-9441

CALL: 1-800-663-4802

Page 39

New Powerhouse XD Housing From Ditch Witch Horizontal Directional Drilling (HDD) operators know that keeping their machines up and running is the key to staying profitable. With the new Ditch Witch PowerHouse XD housing, drillers can be confident that they’ll be able to keep their equipment operating at its maximum efficiency.

“In direct response to customer feedback, the rear lid pin has been removed, which reduces the hardware required on a jobsite and the likelihood of stress fractures in a critical, high-stress area,” said Josh Kennedy, Ditch Witch HDD pipe and tooling product manager. “Instead, the updated housing design only uses a lid pin and retainer pin, leaving no threads to come loose.”

The new HDD tool optimizes fluid flow to ensure spoils are removed properly, and keeps valuable electronics cooler. Having the ability to know exactly where the

drill head is during a bore is essential. The PowerHouse XD is a durable and trusted housing designed and manufactured to ensure the beacon does not overheat and lose functionality.

Additionally, the fluid nozzles at the front of the housing have been recessed for greater protection against harsh conditions. This feature increases durability and helps keep the electronics within the housing in good working order.

As an added layer of protection, every housing comes with an industryexclusive, Beacon Buddy, which allows additional fluid to flow to cool electronics if they get too hot.

For more information on the Ditch Witch PowerHouse XD housing, visit www.ditchwitch.com/ parts-service/hdd-tooling or visit your local Ditch Witch dealer. b Source: Ditch Witch

Your Parts, Service & Equipment Experts!

• Huge parts Inventory

FULLY EQUIPPED TRUCKS

• 35 Years industry experience • Extensive product knowledge • Factory trained technicians

4500 SQ. FT. PARTS FACILITY

QUALITY GUARANTEED REPAIRS

• Emergency service

Call:1-833-601-6787 or 780-460-2220 PDQ Parts available for:

Cedarapids®Eljay ™ wear/Repair Parts.

Eagle® Wear/Repair Parts Powerscreen Track-Mounted Parts.

Cone Liners, Jaws, Blow Bars & Accessories (all makes & models).

Conveyor Componentry Engineered & Custom Solutions.

ChieftainEquipment

Sales & Rental Professionals Trusted Parts Experts Service & Maintenance Specialists

F/T HD Mechanic Required

Email resume to: ken@chieftainequipment.com

Alberta / Saskatchewan / Northern Territories

1-833-601-6787

chieftainequipment.com

Page 40

Supply Post · supplypost.com

November 2020

SALES & RENTALS SCREENERS • CONVEYORS • CRUSHERS

1-800-960-9939 | 403-946-4860 | Fax: 403-946-5191

WESTERN CANADA’S PREMIER McCLOSKEY DEALER CANADIAN MADE EQUIPMENT THAT’S BUILT TO LAST!

QUALITY NEW & USED EQUIPMENT - IN STOCK NOW! 2020 SDX 150 TELESCOPIC CONVEYOR WITH TRACK BOGIE

2018 KOMPTECH NEMUS 2700 (625 HOURS)

2018 HIKON FEEDER W/CABLE AND CONTROL PANEL

2020 NEW McCLOSKEY C3 CONE CRUSHER (200 HOURS)

2020 McCLOSKEY R155 WITH EXTENDED TAIL CONVEYOR

(

2007 CEC 6 x 16 3 DECK SCREENER HYD.TIPPING GRIZZLY, (5530 HRS)

2018 MDS INTERNATIONAL ROCK TROMMEL WITH HYDRAULIC TIPPING GRIZZLY (480 HOURS)

CALL TYALTA FOR SPECIAL PRICING!

In House Financing now available! Flexible terms and conditions.

Call Tyalta Finance today at 1-877-550-0016, finance@tyalta.com

www.tyalta.com | info@tyalta.com

.com FAMILY OWNED, SINCE 1971

SECTION 3

.com NOVEMBER 2020 · PAGE 41

SIX LOCATIONS TO SERVE YOU!

E!

VALU GREAT

00 $163,5

Victoria: 888-652-9139 Duncan: 866-746-1515 Langford: 250-915-0350 Nanaimo: 250-756-0026 Burnside (Parts): 250-384-0451 Campbell River: 250-286-1151

2016 WESTERN STAR SELF LOADER 2016 WESTERN STAR SELF-LOADER, 4900 WS, Detroit DD16 600HP, Eaton 18 spd, 20,000FA, 69,000RA, rigged w/2004 Serco 230 B selfloader and sliding log bunk, 185,700 kms. PASSED INSPECTION & READY FOR WORK.

WE ARE HERE TO SUPPORT YOU! · All our locations are open providing safe places to get your truck serviced · We will get the right parts delivered to your location.

Ed Murray: 250-812-2925 Garry Shelton: 250-715-5088 Emily Polack: 250-480-8281 Ted Peterson: 604-240-6181 Rob Nessel: 250-710-3626 Craig Willett: 250-287-6169

FALL SPECIALS ON ALL STOCK TRUCKS

2020 WESTERN STAR 4900 with Cummins X15 605hp 1850 lb/ft with Eaton 18 spd. manual trans., 20,000FA 46,000RA rigged with Nahanni light stell box and pony wet kit. IN STOCK!

2021 WESTERN STAR 4900 Tri-Drives, Detroit DD16 600Hp 1850 Torque With Eaton 18 Speed Manual Transmission. 20,000Fa, 69,000Ra. Loaded Spec. IN STOCK & READY FOR RIGGING! 4 TRUCKS IN STOCK!

2021 WESTERN STAR 4900 Detroit DD16 600HP 1850 lb/ft with Eaton 18 spd. Manual transmission.

20,000FA, 46,000RA. Rigged w/ Nahanni Tub body Pony Wet Kit. IN STOCK!

2020 WESTERN STAR 4900SB Tridrive 600HP, 1850# torque, 18 spd. trans., 20,000# front axle, 69,000# rears, loaded, c/w Nahanni 22' light steel box, pony wet kit.

RIGGED AND READY FOR WORK!

2021 WESTERN STAR MIXERS – 4800 w/factory tandem steer, Detroit DD13 with Eaton 18 spd manual and Ultra Shift automated transmissions available. Rigged with McNeilus 14 yr drum. CALL TODAY FOR PRICING!

2021 CASCADIA TRAIN TRACTOR DD16, 600hp, Eaton 18 Speed Transmission, 13,000 FA, 46,000 RA, 72" XT Sleeper., LOADED OWNER OPERATOR SPECS - 2 UNITS IN STOCK CALL TODAY FOR PRICING

2021 CASCADIA DAY CABS! Detroit DD13, 505HP, 1850# torque, DT12 trans., 13,300 front axles, both 40,000# and 46,000# rear axles, great town or B train tractors. 5 TRUCKS TO CHOOSE FROM!

2021 CASCADIA SLEEPER with 72"high roof sleeper.

DD15 505 hp with detroit DT12 Automatic trans., 12,500#FA with 40,000#RA 233" WB.

2020 WESTERN STAR 4700, DD13 – 470HP, RTLO16918B, 20,000# front axle, 46,000# rear axles, c/w Can American Soil King Extreme Slinger loaded truck, includes auto greasing system. CALL TODAY FOR PRICING

www.prtruckcentre.com

TRAILERS

November 2020 KENWORTH

Supply Post · supplypost.com

KENWORTH

Page 42

Kenworth W990 Becomes Long-Hood Truck Of The Future For Pocock Trucking When Kenworth unveiled its new long-hood, the Kenworth W990 in 2018, it didn’t take long for John Pocock to schedule a meeting with Sam Moss, Kenworth Sales Company – Idaho Falls new truck salesman to place an order.

“Kenworth trucks, primarily Kenworth longhood tractors, have been a part of our operation for years,” said Pocock, who owns Pocock Trucking.

“The traditional look of

the long-hood has played a role in establishing our company brand and how we’re perceived by our customers. Plus, our drivers enjoy operating them.

Kenworth produces high quality trucks. When Kenworth announced that they were coming out with the Kenworth W990, I knew it could only be an improved version of its predecessor.

Kenworth’s reputation solidified my decision in transitioning to the new truck.”

For Pocock, his experience with Kenworth began when he drove a Kenworth for his father, John S. Pocock, who previously owned the company. The behind the wheel experience played a role in Pocock Trucking’s continued relationship with Kenworth.

“My dad started Pocock Trucking in 1979 and, in 1985, I started driving for him,” Pocock recalled. “I drove a Kenworth cabover,

making deliveries throughout Washington, Oregon, and Idaho pulling hopper bottom doubles to deliver fertilizer, potatoes and coal. That’s when my appreciation for the quality of trucks that Kenworth produces began to build, and as our company continued to grow, so did our fleet of Kenworths.”

Today, the Sugar City, Idaho-based bulk hauling company specializes in delivering fertilizer, grain, wheat, potatoes, road salt and other bulk commodities in the lower 48 states

and in Canada. Pocock Trucking operates 32 company-owned trucks and has contracts with 40 owner-operators. The fleet is primarily made up of Kenworth long hoods, including eight 76-inch mid-roof Kenworth W990s and one 52-inch mid-roof Kenworth W990 -- all spec’d with PACCAR MX-13 engines rated at 510 hp, 1,850 lb.ft of torque and 18-speed transmissions.

Pocock Trucking currently has two more 76-inch mid-roof Kenworth W990s on order.

“We’ve been placing

Kenworth truck orders with Sam at Kenworth Sales Company for years now,” said Pocock. “He knows our operation well.

When we need a truck, he knows exactly what we need and how to spec it out. He’s become a good friend and a great asset for our operation.”

According to Pocock, when PACCAR began offering the PACCAR MX13 engine with a rating of 510 hp in 2016, the power was exactly what the company had been waiting for.

Continued on page 43

Details: Tenco Combination Body-Center Discharge, Full Bosch Rexroth CS 550/150 Control and Hydraulic System, Tenco H345 Full Trip Front Plow Mount, Tenco Two-Way Front Plow, Tenco TCW-10-H-38 Wing RH Mid Mount, LED Plow Lights, Remote display, Joystick c/w Pedestal mount, Electric Tarp w/ mesh cover, Hardox 450 body, Screens, Rear Beacon, Alternating Flashing Ambers, 1,200 Liter Pre-Wet System.

ID# 14618

2020 WESTERN STAR 4700SB

DAY CAB TANDEM DRIVE SNOW PLOW / SANDER TRUCK

MEMBER OF:

1806 2 Street, Nisku, AB, Canada T9E 0W8 brandt.ca/trucks 1-844-388-2770

RENTAL PURCHASE OPTIONS, FINANCING, AND TRADES AVAILABLE

Continued from page 42

It’s become the engine of choice for Pocock Trucking. “Since we haul up to 120,000 lb. GCW, we need that extra horsepower,” said Pocock. “It’s been a great engine for us, and it’s reliable.”

The company’s Kenworth trucks typically average 145,000 miles per year and are traded into Kenworth Sales Company – Idaho Falls around 600,000 miles to ensure drivers are always in new equipment, according to Pocock.

“Driver retention is big for us,” said Pocock. “We let some of our senior drivers choose which truck make and model they want us to purchase. We want our drivers to be comfortable and happy with what they’re driving. The way our fleet is made up, the majority of our drivers tend to go with Kenworth long hoods. I believe allowing drivers to choose what trucks they drive helps us

Supply Post · Our Readers Are Your Buyers reduce our driver turnover.”

According to Pocock, all of the fleet’s 76-inch mid-roof Kenworth W990s feature the W990 Limited Edition interior, which comes in midnight black with glossy Ravenwood door and dash trim accents. The special interior features rich black leather, embroidered W990 logo, Royal Blue double-stitched diamond door pads, black leather wrapped steering wheel with Royal Blue stitching, and driver and passenger seats with suede charcoal inserts and perforated leather with Royal Blue backing.

“Our drivers love the creature comforts and latest technology features in the cabs of Kenworth trucks,” said Pocock. “Our goal is to always provide our drivers with the highest quality equipment and driver comforts. It’s one of the main reasons our driver turnover is so low.”

Mentors And Mentor Companies Play Key Role In Training New Drivers The BC Forest Safety Council (BCFSC) is currently working with training providers to offer comprehensive quality industry recognized training based on the Professional Log Truck Driver Program and the Wood Fibre Hauling Safety Group (WFHSG) Driver program. These industry training programs are built to support the development of competent drivers and include a four to six week mentorship providing students with practical driving skills which support the knowledge component from their course instruction.

Both the mentoring companies and mentors play a key role in the training and professional development of new drivers.

There is no substitute for the knowledge and skills that can be learned from an experienced driver, and the success of training relies on the participation of experienced industry drivers mentoring new ones.

Companies willing to mentor new drivers understand the need for comprehensive training as shown by their commitment to these mentorship-based programs that focus on creating safe, professional drivers.

Mentors have unique competencies and are willing to work with a student and assist them in obtaining the necessary practical skills built from the knowledge and attributes learned from course instruction.

While there are many highly skilled and knowledgeable Professional drivers out there, mentoring a new driver requires an additional and unique set of competencies combined with a willingness to share their cab with a student.

Jed Bush, who has driven for Pocock Trucking for 18 years and has logged 4 million miles in the Kenworth W900L in his career, is one of Pocock Trucking’s latest drivers to transition to the Kenworth W990.

“I’ve driven quite a few truck makes in my career, and nothing in my opinion compared to the Kenworth W900L,” said Bush. “I thought it was the best truck out there, but the Kenworth W990 has changed that. It’s everything the W900L is and more. The improved visibility and lighting in the W990 is more driver friendly – it’s especially noticeable when driving at night.

And the performance I get from the PACCAR MX-13 engine is solid – I get plenty of power. The technological upgrades in the cab, like Bluetooth capability, is also a plus. I’ve always thought that Kenworth produces the best trucks on the market, and the W990 gram to utilize the resources developed by the Log Truck Technical Advisory Committee (LTTAC) with support from the Trucking and Harvesting Advisory Group (TAG), and the Wood Fibre Hauling Safety Group (WFHSG). The commitment by members of the LTTAC, TAG and the WFHSG was exemplified by their willingness to mentor students.

Students were placed with mentors from Munden Ventures Ltd., R&A Logging, Arrow Transportation Systems Inc., Valley Carriers, Sutco Contracting Ltd., D. Jones Trucking Ltd., Inwood Trucking and AgriTrans Services. Additional opportunities were provided by DCT Chambers.

Building on the success of the Okanagan College Program, the BCFSC is collaborating to deliver similar programs with the College of New Caledonia in both Quesnel and Fort St. James. The current enrollment of six displaced forestry workers in the program at CNC Quesnel is a great indication of how the programs can support retraining of forestry workers impacted by mill closures.

If you are interested in learning more about mentoring, please contact the BCFSC Transportation Safety Department at transport@bcforestsafe.org. b

Mentors should possess: • Professionalism in all aspects of the occupation • Effective communication skills to help support the student through the learning process • Patience to work with an individual • Willingness to adjust to working more slowly in order to accommodate the students’ learning • The commitment to working with students for four to six weeks to develop the skills required of a Professional driver The Okanagan College Program with groups of students in Oliver and Salmon Arm was the first Professional Driver Pro- Source: BCFSC

Page 43 KENWORTH

November 2020

is living up to that.”

With more than 90,000 miles under his belt in the Kenworth W990, Bush said that his truck gets a lot of attention when he’s out on the road. And the compliments from drivers and customers seem to be a daily occurrence.

“Everyone seems to take notice of the truck, it’s pret-

ty cool,” said Bush. “The other day I had a customer come out to chat with me and he mentioned that it’s the best-looking truck he’s ever seen. It’s great to be running equipment that receives high praise.”

According to Pocock, operating high quality equipment helps the company achieve its marketing

goals.

“Our trucks are what our customers see, and we want to deliver their products in clean, good-looking trucks,” said Pocock. “The Kenworth brand aligns well with how we want our customers to view our company.” b Source: Kenworth

FOR SALE: 2005 HOLIDAY NEPTUNE PDQ36

42,500 Miles, ISB300 Cummins w/exhaust brake, Alison 5spd auto, single rear axle w/Duals, air ride susp. Air park brake, main brakes hyd. No air ticket required to operate. Recent work incl. New house batteries, New Chassis batteries, Rebuilt Alternator, Roof check/resealed (it was not leaking, this was preventative only). Oil changed regularly, last less than 5000 miles ago, may be done again before sale. Few small scratches, generally paint, exterior in good shape. 4 slides outs - large living space, 2 door fridge/freezer, 2 A/C units, Onan 5500W generator, Upgraded to flat screen TV/DVD players in front and rear bedroom. Queen bed w/recent new mattress. Could come equipped with some contents such as cutlery, dishes and/or other items, c/w good quality storage cover. Lots of under house storage compartments. Includes electrical, water/sewer hook-up equipment. See more photos online at SupplyPost.com.

Asking $74,500 but will consider reasonable offers.

Call Robert: (604) 856-2206 · robert.watson@supplypost.com

Supply Post · supplypost.com

24 HR FINANCING AVAILABLE

0 0 8 st 5 7 ’s Largeer a d 0 a n a 8 stern C g Deal 4-

4ailers.com 1q-ue8 reltr

We Trail Kin & e r y n Et

!

K C O T S N I S FULL R

. Rd., Winnipeg, MB R2J www Niakwa 1585

3T3

E L I A R T

R CALL FO ILS! DETA

(1) IN STOCK NEW ETNYRE BLACKHAWK 55 TON TRIAXLE LOWBED, 8’6” wide, Hendrickson A/R w/60” spread, set up for single axle Jeep and single axle booster, steel wheels.

Call for details.

2021 REITNOUER CK 90 53’ X 102” all aluminum flat $46,100

(7) IN STOCK NEW TRAIL KING TK80 MG DOUBLE DROP LOWBED, mechanical detach, Air-lift Centre axle, fixed triaxle, 28’6” in the well, aluminum wheels, aluminum cross-members/front and rear decks/pullouts. Tandems also available. Call for details

IN STOCK

(5) IN STOCK 2020 ETNYRE 50 TON LIMITED triple axle hyd. detach lowbed.

Call for details.

2008 REITNOUR ALL-ALUMINUM TANDEM STEP DECK, 48’ x 102”, Air-Ride, front axle slide, alum. wheels, safety……..$22,000

NEW 2019 TRAIL KING TK110SA TRAVELLING AXLE RECOVERY TRAILER, 53’x108”, 30,000lb winch w/wireless remote, Hendrickson A/R, 255/70R22.5 tires.......... $127,000

HMW BOX LINER - In stock for gravel trailers. 1/4” and 3/8” in stock, available in MB and SK Call.

November 2020

Utility Commemorates 100th Anniversary Of C.R. England, Inc. Utility Trailer Manufacturing Co., the industry’s largest manufacturer of refrigerated trailers and a leading manufacturer of dry freight vans, flatbeds, and Tautliner® curtainsided trailers is pleased to congratulate its customer C.R. England on their 100th Anniversary.

Founded in 1920, C.R. England is a refrigerated trucking and transportation company located in Salt Lake City, Utah.

To commemorate their 100th anniversary, Utility Trailer Manufacturing Co. in conjunction

with 1580 Utility Trailer presented CR England a Utility 3000R refrigerated trailer. The trailer features Hendrickson ULTRAA-K, TIREMAAX Pro, Bendix Air Disc Brakes on Conmet Preset plus alum hubs, Thermo King S-600 refrigeration unit, and a custom 100th anniversary graphics package.

“When you think about C.R. England, our dealership and Utility, you will see 10 generations across 3 families and 3 separate businesses all working together to achieve success,” said Justin Deputy, Presi- Source: Utility Trailers

Log Truck Driver’s Preparedness Saves Pick-Up Driver from a Fiery Crash On July 22, 2020 emergency crews responded to a two-vehicle collision near the Nanaimo airport at Cedar Road. At around 6:00 am, log truck driver Carl Wilson was hauling his fully loaded truck north on the Trans Canada Highway when he felt a “big bang” at the back of his truck.

After pulling over, Carl soon discovered a pick-up truck had slammed into the back of him and was wedged between the load.

Mosaic Forest Management employee Darryl Slater, was driving southbound at the time and came across the accident just moments after impact.

A fire had started underneath the pick-up’s hood and Carl quickly engaged his on-board safety equipment using his fire extinguisher to exhaust

dent of 1580 Utility Trailer.

“We’ve been blessed to have a strong relationship with C.R. England for nearly 40 years and witness their ongoing success.”

Craig Bennett, Senior Vice President of Sales & Marketing for Utility added, “We are proud to gift this commemorative trailer to C.R. England. We recognize them as one of the top leaders in the refrigerated transportation industry and congratulate them on this great achievement.”

C.R. England services include National, Mexico, and Regional Truckload service in addition to Dedicated and Intermodal services. For more information about C.R. England, visit www.crengland.com. b

back. Emergency services arrived quickly and extinguished the fire completely and the pick-up driver was taken to hospital.

According to a CTV news report, the North Oyster Fire Captain, Kristopher Hill, said Wilson “Definitely saved his life. The scene might have looked a lot different if he hadn’t done what he did.”

Many factors played a part in turning this accident into a good news story. Thanks to Carl’s years of experience, his alertness to his vehicle’s behaviour, his level-headed assessment of the situation, his quick reaction to access his on-board safety equipment and the teamwork between Carl, Darryl and the two other men from the Schnitzer Steel Recycling Facility, a driver was saved from a lifethreatening and potentially fatal incident. b

the flames with help from Slater who also assisted using the extinguisher from his own vehicle. Once the flames were under control enough to safely extract the driver, Carl, Darryl and two workers from the nearby Schnitzer Steel Recycling Facility proceeded to assist him to a safe location and administer a first aid assessment. The driver was coherent and apparently uninjured and able to wait for paramedics to arrive.

Carl then decided it was safe to return to the vehicle and attempt to extinguish the flames further. Darryl assisted Carl once he determined the driver was safe and they attempted to extinguish the fire until the extinguishers were exhausted. The fire began to grow shortly afterwards, and people were directed to move Source: BCFSC

DARRYL SLATER, MOSAIC

Page 44

November 2020

Supply Post · Our Readers Are Your Buyers

Page 45

1-855-998-0716 SALES • RENTALS • PARTS • SERVICE & REPAIRS • FINANCE & LEASING

2021 Doepker Super B Flat Western Low Rider Edition, c/w 4x Tool Boxes, Enclosed Dunnage, Chain Hangers, All Aluminum Wheels, Tiremaax Inflation System and Much More, STK# 13500.......................$99,995

2019 Cross Country Tridem End Dump, Tri Drive Truck Ready, Aluminum Wheels, Scissor lift… $79,995

2021 Trailtech TD220 Flat Deck with Beavertail & Ramps, 41” Deck Height, 102” Wide, Spring Ride, 26’ Deck Plus 5’ Beavertail……. $27,995

2020 Doepker Suber B Side Dump, 25 Cu.Yd. Cap. Lead & Pup = 50 Cu.Yd. Total! Elect. Sidekick Tarp Syst., Upgraded Fenders w/ Mudflaps, STK 12864 ... .................................................................$156,995

RENT FROM US!

2021 Polar Stainless Steel 8,000 US Gallon Tridem Water Tank, c/w Heated Rear Pump Cabinet, All Aluminum Wheels, 304 SS, Side Ladder, 20” Manhole, 1x Compartment…………$149,995

2021 Doepker 53’ Tridem Flat deck, c/w, Premium Smooth Tool Boxes (2), Tire Inflation System, Tow Hook, Wide Load Lights, All Aluminum Wheels, STK# 13471……………..$59,995

2020 Polar Pneumatic Super B, 1,125 Cu.Ft. Cap. Lead & Pup = 2,250 Cu.Ft. Total! Hose: Alum. Tube 8” Dia. X 21” Long Hose Carrier, STK 12751 ........... ................................................................. $236,995

2021 Doepker Tridem End dump, All Aluminum Wheels, Sealed End Gate, Extra Ladder at Front, HT300 Suspension with Lift Axles, Electric Tarp….$99,995

Our rental fleet has over two hundred units in service. We offer daily, weekly, and monthly rental purchase options available.

2020 Doepker Fixed Neck Tridem Lowbed, Narrow Low-Pro Fixed Gooseneck, Tri-Drive Truck Ready w/ 2x King Pin Locations, 10’ W, 25’8” L Working Deck, 55’ Overall Trailer Length, Single Axle Booster Hookup at Back c/w Air & Elec., STK# 12576 ..... $99,995

2021 Doepker Legacy Grain Trailer, Tridem, 3 -Hopper, Lift Axles, Tire Inflation, Electric Tarp, Electric Chute Openers, Wireless Remote, STK 13484 ................................................................. $100,995

WWW.EDMONTONTRAILER.COM

Supply Post · supplypost.com

November 2020

PHOTOS THIS PAGE: LAPRAIRIE GROUP

Page 46

LaPrairie Group Of Companies Grows With The Acquisition Of Two Heavy Haul Transportation Companies LaPrairie Group of Companies, a Canadian-owned, full-service crane and transportation and logistics announces the acquisitions of Entrec Alberta Ltd. and

OFFERING A FULL LINE OF TRAILERS TO SUIT YOUR NEEDS!

Let K-Line quote your next trailer!

Call us Toll Free: 1-888-880-5544

#klinetrailers

|

www.klinetrailers.com

Capstan Hauling, both divisions of Entrec Corporation – a crane and specialized transportation solutions provider.

Through the acquisitions, Entrec and Capstan will become subsidiaries of the LaPrairie Group of Companies and be managed and operated as separate businesses.

“We look forward to the added value that these acquisitions will bring.

Through the offering of jack and slide services, additional transport trucks and a modern fleet of platform heavy haul trailers, we will be in a position to offer a one stop solution to existing and new customers in these complimentary industries,” said Scott LaPrairie, President and CEO of LaPrairie Group of Companies. “These additions will allow us a total load haul and place of oversized Alberta-manufactured oil and gas plant modules, contributing significantly to the transport effectiveness in the oil and gas sectors in Western Canada.”

For over 25 years, Entrec

has provided safe, innovative crane and specialized transportation solutions for Canadians, routinely working with over-weight and over-size cargo within the oil sands, Liquefied Natural Gas (“LNG”), conventional oil and gas, mining, petrochemical, pulp and paper, infrastructure, refining, and power generation industries. Acquired by Entrec Corporation in 2018, Capstan has been providing oil and gas heavy haul transportation and picker truck services for over 18 years to the natural resources industry in Alberta and British Columbia.

As a part of the acquisitions, LaPrairie is pleased to welcome over 65 experienced driver operators and continuity by retaining the existing on-the-ground management team. Both companies will continue to operate as their own entities under the LaPrairie Group of Companies, with a shared focus on increasing their service footprint in Grande Prairie and Fort McMurray. b Source: Venture Comms

November 2020

Supply Post · Our Readers Are Your Buyers

Premium Truck & Trailer Announced As New Lode King Dealer For Central B.C. Steel Super B’s

Steel Flatbed

Steel Drop Deck

Premium Truck & Trailer Inc. is excited to announce their appointment as your Lode King trailer dealer for Central British Columbia.

Lode King, a division of

Triple E Canada Ltd. is a privately-owned trailer manufacturer based in Winkler Manitoba. Lode King, Canada’s Premier Trailer OEM offer a com- Source: Premium Truck & plete line of steel or alu- Trailer

New Planning Tool Simplifies Regional Truck Navigation In B.C. TransLink and the Government of British Columbia are releasing the Truck Route Planner, an online tool to help commercial vehicle operators plan their trips. This tool is the first of its kind in Canada to plan truck routes with a holistic picture of the region’s commercial vehicle network.

To use the Truck Route Planner, truck operators input the dimensions of their vehicle with their desired destination and starting point to find the optimum route for their vehicle.

The Truck Route Planner suggests optimum routes based on: • The operator’s vehicle dimensions • Municipal bylaws • Height clearances • Bridge weight load limits • Major road closures on truck routes The tool also has COVID-19 information such as open businesses and facilities. Operators can see washrooms and parking locations specifically designated for commercial vehicle drivers, as well as restaurants and hotels that are open to the public.

The Truck Route Planner is a pre-trip planning tool, it is not designed to provide real-time directions. Operators are asked

minum commercial flat deck, drop deck and grain bulker trailers. Lode Kings commitment to quality and to product innovation over the last 40 years has propelled them to be Western Canada’s largest trailer manufacturer.

Premium Truck & Trailer Inc. operates in 5 locations in Central BC. We have been in the truck & trailer business in BC for over 50 years and are headquartered in Prince George BC. We are pleased to be able to offer our customers Lode King parts, sales and service in Kelowna, Kamloops, Williams Lake, Prince George and in Terrace BC. Stop in to a Premium Truck & Trailer location near you and see how Premium Truck & Trailer and Lode King trailers can be the answer to your commercial trailer needs. b

the technology that made this app possible. This online tool makes truck operators’ jobs easier and safer in and around Metro Vancouver and will help keep our provincial economy moving,” said Honourable Anne Kang, Minister of Citizens’ Services.

“This new online tool will make it easier for truck operators across the region to plan their trips in accordance with varying municipal regulations. I’m proud that this industry-leading technology will benefit the BC economy by making it easier to transport goods throughout Metro Vancouver,” stated Sany Zein, TransLink VP of Infrastructure Management and Engineering.

“The Truck Route Planner supports trucking companies in finding safe, viable routes for goods movement in Metro Vancouver, taking some of the guesswork and frustration out of their operations. We were extremely pleased to work with TransLink on the BETA version of this tool and appreciate their vision and that of the Province of BC in undertaking its development and prioritizing efficient goods movement for the region,” said Dave Earle, BC Trucking Association President & CEO. The app is free at trans link.apps.gov.bc.ca/trp/. b

to not use the tool while driving. Operators of oversize or overweight vehicles on provincial highways should not use this tool, and instead plan their route using other provincial resources such as: • DriveBC’s Commercial Vehicle Clearance Tool • Pre-approved weight routes listed in Chapter 6 of the Commercial Transport Procedures Manual (Section 6.3.3) • The Project Cargo Corridors website • CVSE staff advice at the Provincial Permit Centre (1-800-559-9688) Identified as a priority in the 2017 regional goods movement strategy, the Truck Route Planner was developed with support from municipalities, the BC Trucking Association, and the Greater Vancouver Urban Freight Council. The Government of British Columbia and TransLink will continuously monitor and update the Truck Route Planner to provide the best available wayfinding information.

“We are grateful for truck operators and the invaluable service they provide, particularly during the COVID-19 pandemic. That’s why my ministry worked closely with TransLink to provide Source: TransLink

Page 47

.

$35,000 + appl. taxes

$34,500 + appl. taxes

SPECIAL INSTALLED FOR 1 MONTH AS A DEMO UNIT PM35525SP CRANE SERIES 35.5 SP - Max Capacity at Max Reach: 4370 lbs @ 45’ 11” (1980 kg @ 14M) Continuous slewing.

PM16525S CRANE SERIES 16.5S - EN 12999, Max. lifting moment 108,540ft/lbs (15 t/m), Max. Cap. at Max. Reach: 1635lbs. @ 47”5’ (Kg 740 @ 14,45 mt), KnuckleBoom Crane w/ Double Links, Boom Pk. w/ 15° Negative Angle.

WWW.TRUCKPROVICTORIA.COM FB30 ELECTRIC 3 -TON, 16,500 lbs. c/w Zapi controller, Zibo battery & charger, pneumatic tires, side shift, 4.8M mast.

$15,500 + appl. taxes FD45 DIESEL 4.5 TON, 10,000 lbs. CT Power Counter Balance., 1104D Perkins Diesel Engine, Auto Trans., Forks Lift Height: 178”, side shift.

$34,500 + appl. taxes $74,785 + appl. taxes

ALSO AVAILABLE FLPG35 Forklift, Dual Fuel 3.5Ton.................................$24,500 4 x Auxiliary Out Riggers 14Ton................................$2,000 ea.

FB25 Electric Forklift, 2.5-Ton....... ........................................$13,500

FD70 DIESEL - 7000 kg, 15,400 lbs, 1106 Perkins Diesel, 3-stage 4.5M mast, side shift, fork positioning, 72 in. Forks.

Z120R-A13 2015 Barrel Clamp Fits class 2 or 3 Forklift Barrel Clamp & Rotate Function ..................$2,000

MARK SALMON Sales Manager

1-855-656-1689 | Cell: 250-889-1529

sales@pmindustries.ca

TRUCKPRO - PM INDUSTRIES - TRACTION 1785 Mills Road, North Saanich, BC

Office: 250-656-1689 | Fax: 250-656-1305

Page 48

Supply Post · supplypost.com

Distracted Driving & Workplace Safety Policies: A Business Case for Employers The Traffic Injury Research Foundation (TIRF) released a new report, Distracted Driving & Workplace Safety Policies: A Business Case for Employers, from its Canadian Coalition on Distracted Driving.

The report was developed in consultation with the trucking industry, the

insurance industry and workplace health and safety representatives and underscores the importance of distracted driving policies in the workplace to protect employees.

Preventing distractionrelated crashes on the road and in the workplace remains a priority for Canadian employers. The

challenges of the past few months necessitated major adjustments to a new normal as businesses focused its attention on the COVID-19 pandemic and establishing new health and safety measures. With traffic volumes returning to normal, the safety of essential workers and others who rely on our roads re-

mains paramount.

“In addition to the immeasurable costs for communities and families who experience death and serious injuries due to distracted driving, these collisions have significant costs and consequences for employers,” explains Robyn Robertson, President & CEO, Traffic Injury Research Foundation. “In several Canadian jurisdictions, motor vehicle collisions account for almost 1/3 of persons killed in traumatic workplace incidents.”

According to the On-

1015 Great St. Prince George, BC V2N 2K8 Dwayne Renshaw 250-612-7512

Byron Roberts 250-640-9599

1015 Great Street, Prince George, BC, V2N 2K8

2017 ASPEN 3+3+3 90 TON TRANSPORTER Unique 24 wheeler heavy haul configuration, 31’ deck x 10’6” wide, pin jointed rear frame, c/w tri axle jeep and tri axle booster. Only 2761 km’s on the hubodometer.

2021 K-LINE 55T LOWBED, Beavertail design with HD rubber fenders, boom stand, 11R24.5 tires on aluminum wheels, tri-drive compatible gooseneck with flip extension for a jeep.

2020 FREIGHTLINER 122SD TRI-DRIVE X15 - 565/2050, RTLO-20918B, 20K FA, 69K RA, Airliner, c/w 21’6” langfab hardox tub body, high lift tailgate, electric flip tarp, vibrator, pony hitch. Rigged and ready to work.

1-800-595-4411

2020 FREIGHTLINER M2 EXT. CAB 4X4, L9 - 350, Allison 3000RDS transmission, c/w Brutus service body, Cobra 11000 lb. hydraulic crane, Predatair 60 compressor, hydraulic stabilizers, mechanics chest and bolt bin.

2020 FREIGHTLINER 114SD TANDEM, DD13 - 450, Allison

4500RDS trans, c/w NRC 40,000 lb. - 28’ galv. deck, subframe and HD tow bar, 2 70” tool boxes, stabilizer grips and recovery roller guide.

2020 PEERLESS 9 AXLE SUPER B LOGGER, 4 bundles

of 9’6” bunks, lift axle, fenders on gooseneck.

MAHINDRA eMAX 25,

3 cylinder - 24 hp diesel, enclosed heated cab, 56” front mount snow blower with hydraulic chute rotation and electric deflector control.

www.premiumtruck.ca

250-563-0696

November 2020 tario Workplace Safety and Insurance Board (WSIB) in 2017, the average number of days lost for transportation employees injured within one month of a workplace incident was nine days. Not only are businesses adversely affected by resulting economic losses due to employee absenteeism (due to injuries) and the replacement of skilled workers, but they also incur significant costs to repair or replace damaged equipment, or goods that are destroyed. Costs can be exponential and not limited to the time of the crash event. Employers can expect to incur costs over a period of months, if not

years, which can impact all areas of their business, and smaller companies have the most to lose.

Diverse expertise was gathered from members of TIRF’s Canadian Coalition on Distracted Driving (CCDD) and a broad range of stakeholders who attended the third and fourth Annual Meetings.

TIRF also worked closely with the Canadian Trucking Alliance (CTA), Private Motor Truck Council of Canada (PMTC), and the Infrastructure Health and Safety Association (ISHA) to refine the business case with a focus on the transportation industry.

Continued on page 49

New Mack MD Gets Body Builder Support Mack Trucks announced today that the all-new Mack® MD Series of medium-duty trucks will be supported by Mack’s extensive body builder resources, ensuring the same unmatched level of support provided for its Class 8 vehicles.

The Mack Body Builder Support Team and the Mack Body Builder Portal offer customers, body builders and dealers the tools needed for a quick upfit process of truck bodies and equipment. Mack MD model information on the Body Builder Portal has been available since Sept. 1, timed for the start of full production of the all-new truck series at Mack’s Roanoke Valley Operations (RVO) facility in the Roanoke Valley, Virginia.

“Mack is dedicated to meeting the specific needs of our customers, which often includes adjustments to ensure proper mounting and function of bodies,” said Jonathan Randall, senior vice president of North American sales. “It’s imperative that we have a good team and system in place to ensure efficiency. Our Body Builder Support Team and online portal offer a wealth of knowledge and information to help with quality truck body installation and operation.”

The Mack MD6, a Class 6 model, has a Gross Vehicle Weight Rating (GVWR) of 25,995

pounds, and the MD7, a Class 7 model, has a GVWR of 33,000 pounds.

Both models are exempt from the 12 percent Federal Excise Tax (FET).

These new products will meet the needs of medium-duty trucking applications requiring dry van/refrigerated, stake/ flatbed, dump and tank truck vocations. The MD6 model does not require a Commercial Driver’s License (CDL) to operate for non-hazardous payloads.

The Mack Body Builder Portal includes useful information, such as body builder manuals, wiring diagrams for electrical interfaces, Technical and Maintenance Council (TMC) recommended practices and information about diagnostic tools.

Mack Body Builder support for the Mack MD Series is just the most recent example of innovations from Mack to broaden its already extensive support for customers and body builders. In 2015, Mack created its Body Builder Support Team, which includes a manager, focused on ensuring effective collaboration among body builders, dealers and customers during the truck ordering process.

For more information about the Mack Body Builder support for the Mack MD Series, please contact your local Mack dealer. b Source: Mack

November 2020 Continued from page 48

“The trucking industry in Canada is committed to eliminating distraction by working proactively on a number of fronts. Efforts identified in TIRF’s business case and used

by Canadian Trucking Alliance members provide real-world examples of proactive steps taken by our industry,” says Geoff Wood, Senior VP, Policy, Canadian Trucking Alliance. “We continue to work cooperatively with governments and share innovative approaches to address distracted driving as part of our 10-point safety plan which also promotes the importance of driver

Supply Post · Our Readers Are Your Buyers training.”

Over the past 20 years, a consistent decline in injuries and claims has been achieved in the transportation industry due to commitment among employers to higher safety standards.

In fact, the number of large trucks involved in fatal crashes generally declined between 2000 and 2015.

While it fluctuated between 309 and 523 between 2000 and 2015 in Canada, more recently the number of large trucks in fatal crashes rose to 389 in 2017 (Transport Canada 2019).

Employers in this industry also recognize their critical role in prioritizing strategies to prevent dis-

WIT’s Accelerate!

Conference Goes Virtual The Women In Trucking Association (WIT) announced its sixth annual Accelerate! Conference & Expo will transition to a completely virtual format to take place Nov. 12-13, 2020. After monitoring the recent escalation of COVID-19 cases nationwide, as well as in Dallas where the in-person conference was originally scheduled to be held Sept. 23-25, it has been determined that focusing on a comprehensive virtual event is the best path forward for the association and our attendees, said Brian Everett, organizer of the event.

“This decision was made in conjunction with soliciting feedback from more than 400 WIT members, sponsors, exhibitors and other key stakeholders,” he said, “which has confirmed that our community is fully supportive of a virtual conference.”

“Diversity in experience, skills and perspective is proven to be critical to the success of any company in transportation, and gender diversity is a critical path to this goal,” said Ellen Voie, WIT president and CEO. “This conference is one way for our industry to share new ideas and best practices that encourage the employment of women, recognize their accomplishments and success stories, and ultimately minimize obstacles faced by women in this industry.”

This 2020 Accelerate!

Conference & Expo will include these dynamic features: • More than 40 educational sessions over two days focused on critical transportation issues and trends, along with perspectives of women in the industry. Five themed tracks are Leadership, Professional Development, HR/Talent Management, Operations, and Sales and Marketing.

• Panel discussions featuring insights and best practices from industry professionals and leaders, as well as professional drivers.

• Peer-to-peer interactive roundtable discussion groups that accommodate live discussions around common areas of interest.

• Dynamic virtual exhibition bringing products, services and value to the marketplace and facilitating dialogue between provider and buyer.

All these features also will be available on-demand for those who cannot participate in the live virtual conference on Nov. 12-13. Group discounts are available to companies wanting to support teams interested in gender diversity within their organizations. More details and registration can be found at https://info.womenintrucking.org/accelerateconference. b Source: Women In Trucking

tracted driving among their employees and protect them from other distracted drivers on the road to ensure declines continue.

Key findings from the report include: • Investment in safety translates into less turnover and higher retention rates of qualified and skilled drivers in an industry with a shrinking pool of potential candidates.

• The cost to implement standard prevention training for all new em-

ployees is still less than the cost of post-incident training for the small number of employees that may require it.

• A pattern of collisions and claims is an indicator of risk and ultimately results in much more expensive insurance costs.

Unfortunately, many smaller companies are not fully aware of the consequences of a blemish on their National Safety Code record which can have longlasting effects.

This business case de-

Page 49 scribes the costs of prevention programs and compares them to collision costs. It illustrates the value of integrating distracted driving policies into workplace safety programs and reinforcing them in day-to-day safety practices. It also contains a call to action for employers in this industry to implement distracted driving policies as a standard component of workplace safety programs.

Tools are included to help employers estimate the costs to their business

and quantify the value of distracted driving safety policies which can protect staff and improve safety in the communities where they live and work.

In summary, employers contributing to the development of the business case agree, “If anyone thinks safety is too expensive, they need to measure the cost of an unsafe operation, workplace injuries and fatalities against the cost of education and effective policies.” b Source: OTA

#5-1340 Stevens Road, West Kelowna, BC V1Z 1G2 Sean Westerman 250-869-9415

Cody Fortin 250-869-9448

1015 Great Street, Prince George, BC, V2N 2K8

STK# 30151A

STK# 30138A

2020 FREIGHTLINER 122SD, 70" Mid Roof Sleeper, Detroit DD16 - 600 HP, Eaton Ultra shift, 13.3 Front / 40 Rears, 244" WB. P.O.R.

2020 FREIGHTLINER M2106 with Sleeper - Cummins L9 350Hp, Allison 3000RDS, 14,600 Front drive axle, 23,000 Rear. ......................................... P.O.R.

STK# 30150A

2020 FREIGHTLINER 122SD, c/w 34” Sleeper, Detroit DD16 - 600 HP, Eaton 18 Speed, 16 Front / 46 Rears, 244” WB. P.O.R.

STK# 30198B

STK# 30203A

STK# 30127A

NEW FUSO FE160 GAS, 15,995lb GVWR, New Collins 16’ box, Allison 1000 trans. Ask about free oil changes on this unit .....................................................P.O.R.

2021 FREIGHTLINER 114SD Detroit DD13 470HP/1650 Lb/ Ft, Allison 4500 RDS, 16.6” Bibeau Hardox Gravel Box is ready to go to work !. ...... P.O.R.

STK# 101321B

STK# 30249B

STK# KS455

2013 FREIGHTLINER 122SD Sleeper - DD15, 13 Speed truck, 13.2 Front / 40 Rears, 244” Wheelbase. Great history on the truck, ready to go to work! ...... .................................................... P.O.R.

2011 FREIGHTLINER 122SD DD15, 18Speed truck, 18 Front / 52 Rears, 265” With Trailer. ........ ..............................................................P.O.R.

STK# 101321B 2012 FREIGHTLINER 122SD DD15, 18 Speed truck, 18 Front / 52 Rears, 265” Wheelbase. Great history and ready to go to work! ........................................................P.O.R.

250-769-7255 1-888-878-2511

2013 FREIGHTLINER 122SD, DD15, 13 Speed truck, 13.2 Front / 40 Rears, 244” Wheelbase, with great history on the truck is ready to go to work! ............P.O.R.

www.premiumtruck.ca

@premiumtruckkelowna

Page 50

Supply Post · supplypost.com

What To Look For When Selecting A Concrete Mixer Truck: Front Vs. Rear-Discharge Options on a rear-discharge mixer include: the manufacturer, standard or bridge model, and advanced controls option.

A bridge model is specifically designed for working on bridges; its specifications are tailored to meet weight restriction and specific state roadway laws.

McNeilus manufactures a Bridgemaster model that features a patented Bridgemaster load-distribution tag axle for higher legal payloads.

McNeilus offers a new advanced control system for their mixers called FLEX controls. Two features that make these controls stand out are their diagnostic capabilities and automated features.

Other options on McNeilus mixers include several washout systems, a choice between a flip-up hopper and an SAT hopper, a ZF drum drive upgrade, and several material choices for Concrete Mixer Truck components such as the Options Choices for mixer body water tank and chutes.

There is little choice when it comes to the size of the mixer; that is largely determined by the axle configuration, however, customers can choose lighter-weight chassis components and a smaller engine (nine litres instead of 13 litres) in order increase mixer capacity. If a smaller engine is chosen, the truck will not perform as well on grades and in other applications that demand higher horsepower.

Chassis Changes Come To Concrete Trucks On the truck side, customers have a few options. Many of the options will make the truck better suited to the application.

For example, a Kenworth T880S with set-forward axle is designed for customers who need to comply with federal bridge formulas.

Numerous options are available for the cab, and most of these are geared toward improving ergonom-

NEW LOCATION: 4600 Collier Place, Williams Lake, BC V2G 5E9

Eli Bergen: 250-267-8054

e.bergen@ premiumtruck.ca

Call for Pricing 2020 FREIGHTLINER 122SD TANDEM DAY CAB - X15 565/2050, RTLO-20918B, 14600 lb. front axle, 46K rear axle with 4.10 ratio, Airliner.

configurations (using from three to seven axles).

When there are multiple axle configurations with the same number of axles, customers can choose between live front axle, or the standard axle. A live front axle provides better traction and maintains a consistent ground clearance.

Both features are favored in off-road applications.

Terex offers different engine options with different horsepower and torque capacities.

“Again, you have to look at where the machine will be operating,” says Kutz.

“Trucks working in urban areas where the plant is five miles away generally work on flat grades and don’t need as much horsepower as trucks working in rural areas, which are more likely to experience more grades, higher grades, and less-than-ideal driving surfaces.”

Then choose between solid suspension or airride suspension. The airride suspension offers a smoother ride and costs more.

And then you need to decorate your truck.

“We can do anything— paint, decals—if you can imagine it, we can do it,” says Kutz. b

How Regulations Can Impact Truck Specifications Regulations determine some truck specifications.

Local weight laws and the Federal Bridge Laws determine how much weight you can put on one axle, so where the truck will operate will determine the axle configuration.

“Once you know the weight laws, then we know which base product we need to talk about,” says Scott Kutz, Regional Sales Manager, Terex.

“And, once you meet these regulations, the customer’s preference will drive the rest of the decision-making process.”

Terex’s Charger Series trucks come in three axle configurations (using either three or four axles), whereas the company’s FD Commander Series trucks come in 10 different axle Source: Conexpo

Sale Priced at $92,900 2019 DOEPKER QUAD LOGGER 9’6” StrongArm bunks, walking beam suspension with SI beam style load cells.

250-398-7411 | 1-877-878-2516

Call for Pricing MAHINDRA 9125P 125hp 4 cyl diesel, power shuttle transmission, loader lift capacity of 5415 lbs. @ 162”, 3 point hitch lift capacity of 7628 lbs.

Benefits Of FrontDischarge Vs. RearDischarge Trucks Front-discharge trucks (and volumetric mixer trucks) come as a total package (mixer plus chassis) and both generally cost more than a rear-discharge truck.

The capital costs of the truck can be recouped since pouring can begin sooner on a front-discharge truck and this can lead to one extra delivery per day and because one laborer is eliminated with a front-

discharge machine, since the chute director position is not necessary and the trucks tend to have a longer lifespan than reardischarge ones.

Since the truck driver operates the mixer from inside the cab, some trucks have a single seat at the center of the cab. Some offer two seats for transportation of additional personnel.

Call for Pricing 2020 RAJA SUPER B FLAT DECKS 3 to choose from, 22.5 and 24.5 tire sizes, call and ask about special pricing on these trailers.

www.premiumtruck.ca

THIS PAGE: CONEXPO

Rear-discharge mixer trucks are the oldest, most popular and most iconic.

Every major truck original equipment manufacturer produces a truck that can be equipped with a mixer body and can be customized for that application.

Front-discharge mixers have been around for four decades, are only found in a few regions in the US, as well as niche markets abroad, but in the regions in which they are found, they tend to dominate those markets.

Each truck has numerous options that owners can select in order to improve productivity, safety, convenience and comfort, increase machine longevity, and decrease downtime. Both types of trucks also need to meet state regulations and this helps drive the decision-making process.

ics and productivity. Popular options that may not be standard include a number of types of seats (highback, heated, leather), a rider seat option, an adjustable steering column, climate control options, other deluxe cab features, heated side mirrors, a three-panel rear window and a diagnostic system.

Trucks equipped with low-speed creeper gears allow for easier operation of the trucks when discharging concrete while moving forward slowly. This can lead to smoother, more consistent placement.

Options that are available on both types of trucks include backup cameras, radar/LiDAR detection, and remote control.

November 2020

November 2020

Supply Post · Our Readers Are Your Buyers

Page 51

Lest We Forget ONTARIO | MARITIMES | QUEBEC

1-855-646-6993

SALES, SERVICE & PARTS

1-855-646-6993 “Your Transport Trailer Superstore!”

Your Transport Trailer Superstore!

IN STOCK Quad and Tri Axle Live-Bottoms -1276667

IN STOCK

Triaxle Aluminum Pony Pups -1276669

4 and 5 axle Full Galvanized Flatbeds-1262768

5 Axle B Trains 28/32 Full Galvanized

Tandem/Tridem/Quad & 5 Axle Live Bottom

40-50 Ton floats, Hydraulic/mechanical & extendables

All Axle Configurations, IN Full Galvanized STOCK Drops & Flats Tandem and Tridem Drops and Flats-83558

winches, 2 load levellers.

-1276659

All Axle Configurations, Drops & Flats

Quad Axle 45’ Dump Trailers

All Axle Configurations, Dump Floors, 2017 Wilson Combo Trailers, Walking 2013 Mac 53’ RAS,17.5 tires, 2 boxes, dunnage 53’ Tridem drop, 60” spreads, 22.5 carrier, alum. out steel in wheels, tires, all Dry alum. Bulk wheels, Tanks wide load strobes, wide load lights, sliding lights, sliding winches, ramp kit.

-1276661

-1262768

IN STOCK -1276669

2

AVAILABLE

2013 48’ MaxMiser Flats

Front slide 10’1” open 60” closed, 22.5 tires, all alum. wheels, 12” crossmembers, coil package, sliding winches.

-1276664

53’ Dry Vans

Tandem/ Tridem Dry Vans

-1276668

Equipment Trailers, Drop Decks, Tags Front slide, 10’1” open 60” &closed, Ponyall Pups alum. wheels, wide load lights,

All Axle Configurations, Drops & Flats

2013 Reitnouer 48' DropMiser

strobes, 22.5 tires, 12” crossmembers.

-1276666

VISIT TRANSEASTTRAILERS.COM

USED TRAILERS IN STOCK

$CALL 2014 UTILITY 53’ REEFER Stainless barn doors and front. Aluminum wheels and skirts, TK Whisper 230 unit. 15,300 hours.

$CALL 2019 EAST TANDEM ALUMINUM FLAT 48’ fixed w/10’1” spread, all aluminum wheels, built in rear steps, LCS sliding tarp system.

$CALL 2014 MANAC 6 AXLE B TRAIN END DUMP 28’ lead/28’ pup, 66” slides, liner & electric tarps.

DISTRIBUTORS FOR

View All Our New & Used Inventory at TRANSEASTTRAILERS.COM

Supply Post · supplypost.com

November 2020

DAIMLER

Page 52

The Next Generation Of Western Star: 49X FRONT PAGE STORY: Western Star has introduced the allnew 49X, its nextgeneration vocational truck built from the ground up to meet the needs of the most demanding applications.

“Our dealers, truck equipment manufacturers and, most importantly, our customers, rely on the dependability, reliability and sheer toughness of Western Star trucks,” said David Carson, senior vice president, Vocational segment, Daimler Trucks North America. “With the 49X, Western Star delivers on our promise of tough, while introducing segmentfirst safety features, an operator-focused experience and easier upfit solutions nderpinned by a stron- that will keep our customger, lighter chassis and ers’ businesses running equipped with an all-new smoothly.”

X-series cab, the 49X delivers maximum versatility in Purpose Built to Get on a purpose-built package. the Job Fast The all-new Detroit DT12 “A vocational truck Vocational series of trans- is a tool for a job,” noted missions and industry- Carson. “We’ve completely leading Detroit Assurance rethought the foundation suite of safety systems offer of the 49X to make it easier proven innovation for best- to upfit, deliver greater duin-class safety, improved rability, return greater payproductivity and maximum load and improve producuptime. tivity at the job site.”

The clean-sheet design of the Western Star 49X enables total weight savings of over 350 pounds in like-for-like spec’ing versus the current Western Star 4900 and that weight sav-

ings starts with an all-new vocational frame. Single channel frame rail options are available in a variety of thicknesses and feature best-in-class RBM (Resisting Bending Moment)

strength rating for single channel of up to 3.7 million inch-lbs. -- yielding greater durability and weight savings. For added strength, C-channel frame reinforcements are available that

reach an RBM rating of 5.4 million inch-lbs. Multiple parent rail front frame extension options are available for applications requiring front-mounted Continued on page 53

DAIMLER

U

November 2020 equipment, such as a plow.

Clear back-of-cab packaging for the 49X allows for easier upfit with features that include: forward mounted DEF tanks; standard in-cab battery box; multiple air tank mounting locations; air dryer mounted under hood (SBA) or under cab (SFA), optimized fuel tank sizes; a compact Detroit aftertreatment system; and functional dual vertical exhaust stacks.

Ready to tackle the toughest jobs “Our customers depend on Western Star trucks to stand up to grueling conditions,” continued Carson.

“To engineer the 49X with the durability and reliability our customers need, we went to their jobsites – the oil fields of west Texas, plowing operations in New Hampshire, and logging operations of British Columbia. We developed the 49X with the input of those customers, and then tested it where they work to ensure it’s ready for the toughest environments.”

The all-new X-series cab was designed specifically for vocational applications and provides additional vehicle weight savings while delivering long-term durability and operator comfort.

Advanced topology optimization was utilized to ensure rigidity and strength, and determine where additional material was needed in the steel-reinforced aluminum cab. Development work on the cab was the most extensive in Western Star history and included multiple cab crush tests to ensure cab integrity in case of a rollover. Full-vehicle shaker tests replicated 800,000 miles of use to test the innovative cab mount system that uses vocational cab isolators mounted outboard for optimal stability and reduced fatigue to both the operator and the cab. It is the segment’s largest cab and offers 10-13 percent greater space than competitors for ample operator comfort.

All 49X models come with all-metal exterior brightwork for a premium look and long-term durability, and a standard interior with upscale appointments including metal accent.

An optional premium trim package introduces richly crafted materials including woodgrain and diamond-stitched seating. In

Page 53

all models, a wrap-around dash puts the driver command center and B-panel in easy line of sight of the operator. On the B-panel, a flex panel can be prepped for a tablet or configured for an additional 12 switches or 10 gauges. Along with a QuickFit Dash Access designed for seamless telematics or other device integration, equipment control and device access is placed within easy reach for the operator.

The hood of the 49X is constructed of highstrength, lightweight molded composite for superior impact resistance and durability. The new hood uses an innovative and patented ISO Tech Hood Suspension system that behaves similarly to a typical coil-over shock suspension with spring and damper.

The system isolates, absorbs and dissipates vibrations from the chassis when driving over uneven terrain to protect the hood from damage and cracking.

The Detroit Advantage Under the hood, the 49X debuts the all-new and work-ready Detroit DT12 Vocational series of automated manual transmissions. Available as either the DT12-V or the DT12-VX and rated up to a GCWR of 330,000 pounds, the DT12 Vocational series was validated in over 35 million miles of testing to deliver performance and durability and can be mated to the venerable Detroit DD15 Gen 5 engine or workhorse Detroit DD16 engine, the largest and most powerful diesel engine available in the North American heavy truck market. Both engines come equipped with Detroit Connect Virtual Technician remote diagnostic services to increase uptime and productivity.

Notably, the DT12 Vocational series of transmissions include side PTO capabilities that allow for added flexibility, and unique work application modes and shift map strategies for all types of terrain. A Rock-Free Mode allows the 49X to free itself from wheel stuck situations, an Off-Road Mode enables smooth driving on extreme terrain, like logging roads and rock quarries, Power Launch which provides powerful takeoffs while protecting the clutch and driveline, and a Paver Mode which allows the

DAIMLER

Continued from page 52

Supply Post · Our Readers Are Your Buyers

truck to shift from Neutral to Drive without depressing the brake pedal when pulling away.

Best-in-class safety in the 49X is enabled thanks to the Detroit Assurance suite of safety systems, which features the most advanced collision mitigation system in the vocational market.

Detroit Assurance in the 49X offers Side Guard Assist (SGA), Active Brake Assist 5 (ABA5), Tailgate Warning, Adaptive Cruise Control (ACC) to 0mph, Lane Departure Warning, Video Capture, Intelligent High-Beam and Automatic Wipers and Headlamps.

With optional SGA, radar technology detects moving objects and pedestrians on the passenger side of the 49X that may otherwise fall in the operator’s blind spot and alerts them with both auditory and visual warnings, providing game-changing technology for safety on the jobsite or on the way there.

ABA5 detects distance and speed to moving and stationary objects in the driving path of the 49X and determines if warning or automated braking is necessary. ABA5 with Detroit Assurance is the only

system on the market that works down to 5 miles per hour, making it ideal for busy jobsites and in congested urban areas. It also recognizes moving pedestrians who are crossing in the truck’s path, alerting and applying the brakes if the operator does not react.

Protecting the most important assets on the job site “The real stars of every job site are the men and women working at it, which is why the Western Star 49X was engineered to deliver best-in-class safety with Detroit, easier entry and exit to reduce workplace injury, and best-inclass visibility to benefit not only the operator, but the entire crew,” said Carson.

With slips, trips and falls serving as the second most common type of workplace injury, and with applications like a concrete mixer where an operator may enter and exit the truck fifty times in a shift in mind, Western Star design-engineered ergonomic ingress and egress for the 49X. Door opening angles of 70 degrees, five hand holds, and step treads wid-

ened by half an inch and constructed as a staircase help facilitate safer entry and exit from the cab. The steps start closer to the ground and use a volcano tread for confident footholds with high traction, added toe clearance, and mud, dirt and debris pass through.

The 49X’s best-in-class visibility comes from a sloped hood enabled by splayed frame rails, a lowered engine position and underhood engine air filtration, a 28 percent larger single-piece ropedin windshield, and an optional three-piece rear window that is 77 percent larger versus the 4900. Optional Borofloat® glass in the front windshield and optional polycarbonate in the rear windows provide impact resistance from debris. An innovative Cbar mirror system features door-mounted mirrors that mitigate the effects of chassis and engine vibration to keep them stable and usable in off-road or paving applications where visibility by the operator to the crew at the back of the truck is critical.

The 49X also debuts a dual-stage LED headlight

system featuring an internally printed heat grid and ambient air temperature sensor which can melt three millimeters of ice in less than ten minutes at 40 degrees below zero, or to burn through condensation in warm, humid environments. Combined with a 45-degree light pattern, the 49X headlight system provides smooth, uniform illumination that shines long and wide to improve visibility and safety on the road or at the job site.

“Our bottom-line intent was to deliver a truck that benefits our customers’ bottom lines,” said Carson.

“We know the conditions our customers are working in, we know the challenges of their operations, and we know that productivity at the site matters most.

That’s why the all-new 49X is purpose-built for durability, safety and maximum uptime – and for our customers.”

Available for order The all-new Western Star 49X is available for ordering this winter and first deliveries begin in early 2021. b Source: Daimler

TRUCK PHOTO ADS Book your ad online at: supplypost.com/advertise/classifieds or call 1-800-663-4802 today!

PAGE 54 · NOVEMBER 2020 2019 RAM 5500 4X4 11 FT SERVICE BODY

WWW.SUPPLYPOST.COM 2019 RAM 5500 4X4 SERVICE DECK

2018 RAM 5500 4X4 PICKER DECK

NEW 2018 M2-132 EXTENDED CAB 4X4

IN STOCK - FINANCING AVAILABLE OAC 1525KM, 6.7 Cummins Turbo Diesel, 6 Spd Aisin auto, 4X4, 11' Wilcox Service Body, VMac VR70 U/H Comp., 5,000 LB Auto Crane EHC5 w/Nexstar cont., American Eagle 8 drawer tool chest, bolt bins & drawers both sides. Fleet Price $169,429 + $698 Admin Service + Taxes. Stk# 19R57036. DL# 30541.

NORTHLAND CHRYSLER DODGE JEEP RAM

1525 KM, 6.7 Cummins Turbo, 6 Spd Aisin, 4X4, 11’ WTW service body, 5000 Lb EHC5 Auto Crane w/pro. controller, VMac G30 Rotary Comp., Honda pwr, remotes, AE tool chest, b/u camera.

Fleet Price $155,429 + $698 Admin Service + Taxes.

Stk# 19R57037. DL#30541.

200 KM, 6.7 Cummins Turbo Diesel, 6 Spd Aisin automatic, 4x4, 551A4 Ferrari Crane, 24" Cross Box with American Eagle tool cabinet, 3" rub rail with stake pockets, goose neck drop ball. $99,888 + $698 Admin Service + Taxes.

Stock# 18R51660. DL# 30541.

Maintainer MTS-1-084 132” Crane Body, 10,000 lbs. Crane, 50-Gallon waste oil recovery system, VMAC 60 CFM Rotary Screw Compressor, Miller Bobcat 250 Welder “ON SALE” $239,980.

COMMERCIAL TRUCK EQUIPMENT LTD.

Call Murray 1-888-457-6908 www.northlanddodge.ca

Call Murray 1-888-457-6908 www.northlanddodge.ca

NORTHLAND CHRYSLER DODGE JEEP RAM

NORTHLAND CHRYSLER DODGE JEEP RAM

2011 WESTERN STAR 4900SA TRI DRIVE LOG TRUCK

2015 KENWORTH T800 TRI-DRIVE SLEEPER TRUCK

1982 PACIFIC P512P 8X4 DECK TRUCK

Detroit, 14.8L, eng brake, Eaton Fuller 18 spd, trip diff lock, A/R susp, 16,000 lb front, 53,640 lb rears, 385/65R22.5 F, 11R24.5 R, 17,327 hrs showing, 657,224 kms showing. THIS ITEM IS FOR AUCTION ONLY. See page 5 for full details.

Cummins ISX15, 550 hp, eng brake, Eaton Fuller 18 spd, hyd wet kit, 16,000 lb front, 61,000 lb rears, A/R susp, 385/65R22.5 F, 11R24.5R, 10,487 hrs showing, 438,141 kms showing. THIS ITEM IS FOR AUCTION ONLY. See page 5 for full details.

Includes: 400 Cummins, 26’ Flatdeck, 75 Ton Winch, 73,369kms. $24,850. Contact us for more information.

6” magnet w/generator. Cummins N14 Plus engine, wet kit for end dump trailer, fitted w/lowbed ramps.

CALL TRAVIS: 403-793-1269

WILF HEWAT REPAIRS LTD

whrepair@telus.net · PHONE: (250) 265-3124

ALLIED SALVAGE & METALS

TEAM AUCTIONS

CALL TRAVIS: 403-793-1269

TEAM AUCTIONS

2002 WESTERN STAR 4900FA

Call Murray 1-888-457-6908 www.northlanddodge.ca

2007 9900i INT

1996 GMC PICKUP

10,000 hrs., 650k, Cat C15 6NZ 475-550hp, Pintle hitch set up for pup or quad, Good running, ready to work! $36,750. Pincher Creek, AB.

C15 550 18 speed 391 gears 4 wheel lock 46rears on hendrickson air ride and wetline. CALL FOR $$

270,000 kms, new engine at 174,000 kms. $2,500.

Langley, BC

CALL DAVE

CALL JEFF

CALL

dafroese79@gmail.com · 403-432-0344

519-580-6480

604-328-7981

Darryl Cameron: 604-790-4927 or DCameron@comtruck.ca

1987 KW C/W VANGUARD 1021 GRAPPLE CRANE

art@alliedsalvagemetals.com · 604-328-2522 2013 PETERBILT W/ 2015 ANSER TRAILER

Cummins 550, 1,000 hrs on turbo, PT/RTLO 20918B transmission, Michelin trailer tires, 1/4 barrel of Lubriplate, 2-spring pks., 2 sets of new trigs, 3/4” socket set w/ other tools, 6-rebuilt rims, Will do inspection for new owner, c/w 1989 Ford pick-up, Asking $115,000 OBO.

MARK GALLICANO

PHONE:(250) 837-9555

November 2020

Supply Post · Our Readers Are Your Buyers

Page 55

SEARCHING FOR PARTS?

The Completely Searchable Supply Post Parts Database Is Here!

WWW.SUPPLYPOST.COM/parts Truck Parts, Equipment Parts, And More èSearch By Part # èSearch By Keyword èLocate That Part You Need Before You Pick Up The Phone!

Page 56

Supply Post · supplypost.com

November 2020

WWW.OCEANTRAILER.COM

NEW 2021 CIMC SUPER B FUEL TANKS IN STOCK NOW!

• Tool boxes • Aluminum Wheels • Hendrickson Tiremaxx Pro • 3 compartment lead • 2 compartment rear

HUGE SELECTION OF QUALITY USED TRAILERS IN STOCK

2017 Wabash tandem reefer, aluminum wheels, SST rear frame, aluminum duct floor, Carrier X-4 7300, 6,620 hours.

New CVI.

2014 Wilson Step Deck,CVI completed 01/19, wide load lights, chain pull ups, dunnage rack, 3 tool boxes, 48 102 Tandem Air Ride.

2011 Lode King Super B Flat,CVI 02/21, chain hanger, load gauge, dump valve, tarp hooks, lift hooks on pup, led lights, winches 3 bar, 16 lead, 14 rear, jhooks opposite, stake pockets 2x4 square, 2-55” alum. tool boxes L/R, a-48” Alum. top; box rear 32/28 Tridem/ Tandem Air Ride.

2011 Great Dane Multi Temp, CVI 02/19, 2015 TK Spectrum, 2 Rows E track, 2-side doors c/s, 1 side door r/s, 1 Remote Evap 48’ 102” Tandem Pintle Air Ride Steel.

CALL YOUR NEAREST OCEAN TRAILER BRANCH FOR QUALITY IN-STOCK USED TRAILERS.

• Reefer Vans • Dry Vans • Flat Decks 2016 Utility tandem DX Dry Van,101” inside width, aluminum roof, hardwood floor, pintle hook, vents front and rear, New CVI.

2019 Midland Dump,MG36TW3000 Side Dump Tub Style Dump, Electric Side Roll, Gemneral HD Grabber Tires, 36 Tridem Air Ride Alum/Steel.

Port Kells (604) 455-0885

Delta (800) 891-8858

• Step Decks • Container Chassis • End Dumps & more!

www.oceantrailer.com

B-TRAIN & TRIDEM HOPPER TRAILERS IN STOCK NOW! Featuring Titan’s foremost building material - THIN WALL extruded, hollow-core panel.

Nanaimo (877) 878-5979

Prince Rupert (250) 627-1981

Edmonton (800) 610-1019

2021 RENN Super B Flat decks in stock, 32/28, aluminum or steel wheels, 2 aluminum tool boxes, 3 bar winches.

2019 Wilson CD-1080 Step Deck, CVI Sept/20, 11ft top deck, 39 1/2 bottom deck, stake pockets, LED lights, wide load lights, in-rail tiedowns, fixed 3-bar winches, rope hooks, 23x17x60 tool box (2),T-J Side Rail 51 102 Tandem Air Ride Alcoa.

Calgary (877) 720-7171

Winnipeg (866) 397-5524

10807 - 209 Street, Edmonton, AB T5S 1Z7

1-800-663-0715 • 780-452-7021 Fax: 780-453-1477

47 Forest Plain Road, Oro-Medonte, ON L3V 0R4

1-866-404-5233 • 705-325-2777 Fax: 705-325-9777

www.jadeequipment.com | info@jadeequipment.com

üPARTS üSALES üSERVICE üRENTALS MACHINES FOR SALE

FINAL DRIVES FOR SALE

2012 VOLVO G976 Volvo D9 Diesel engine, (210-265 HP) 11 speed trans. All wheel Drive, 14’ Moldboard, Float valves, Accumulators, 17.5 x 25 tires, brackets for future installation of attachments.

NOTE: Attachments are available. $139,800.

2007 JCB 436ZX , Hyd. Q/A, GP Bucket, Aux. Hyd.’s, Ride Control, Emergency Steering, 20.5x25 tires $74,600.

JD RM100072RX FINAL DRIVE CALL FOR DETAILS

CURRENTLY DISMANTLING VOLVO FINAL DRIVE EXCHANGE

ENGINES FOR SALE 2007 VOLVO A40E 6X6

JD608IH & 6090H CUMMINS ALSO AVAILABLE

2002 VOLVO G740

2008 JD 772G

Celebrating 32 Years! 1988-2020